M22 BA englisch Vektor - ISSC
24
Transcript of M22 BA englisch Vektor - ISSC
![Page 1: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/1.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 2: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/2.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 3: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/3.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 4: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/4.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 5: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/5.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 6: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/6.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 7: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/7.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 8: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/8.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 9: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/9.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 10: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/10.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 11: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/11.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 12: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/12.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 13: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/13.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 14: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/14.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 15: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/15.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 16: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/16.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 17: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/17.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 18: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/18.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 19: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/19.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 20: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/20.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 21: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/21.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 22: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/22.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 23: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/23.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 24: M22 BA englisch Vektor - ISSC](https://reader031.fdocuments.us/reader031/viewer/2022012022/6169c65311a7b741a34b3793/html5/thumbnails/24.jpg)
Manufacturer:ISSC Handels GmbHFurt 43AT-4754 Andrichsfurt Austriawww.issc.at offi [email protected]
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.89 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Relative Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Relative Colorimetric Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no