LOCK CORE ORDER FORM - ofswebbucket.s3.amazonaws.com · Lock cores are available in NICKEL [N],...
Transcript of LOCK CORE ORDER FORM - ofswebbucket.s3.amazonaws.com · Lock cores are available in NICKEL [N],...
ofs.com imagine a place® 800.521.5381 2018 Pricing K
LOCK CORE ORDER FORM
OFS / Carolina | LOCK CORE ORDER FORM
FORM DETAILS
If this lock core order form is not submitted with the purchase order, all units will be keyed 345T.
Please note, each lock ordered consists of one (1) core and one (1) key.
Please indicate the brand to which this order applies. If ordering for multiple brands, please use a different form for each brand.
Lock cores are available in NICKEL [N], BRASS [BR] or BLACK [K]. Key numbers 100-150 are in stock and available for shipment
with the purchase order. Other key numbers will be ordered, acknowledged and shipped on a separate order with a three (3)
week delivery.
ORDER INFORMATION Please print legibly and fill out every applicable field below.
DATE (MM/DD/ YYYY) SUBMITTED BY
DEALER NAME END USER NAME
PURCHASE ORDER NUMBER ACKNOWLEDGMENT NUMBER
COMMENTS
BRAND Please circle the brand to which this order applies.
OFS CAROLINA
ORDER Please continue on additional pages if needed. Mark the page number here.PAGE NUMBER
TOTAL PAGES
QUANTITY KEY NUMBER COLOR TAG
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
ofs.com imagine a place® 800.521.5381 2018 Pricing O
MODIFICATION LIST
mod# modification detail list price
1. MOD#1 Standard OFS Hardware Pulls $25 Each
2. MOD#2 All Modular Top, End Panel, and Back Panel Cut Downs $100
3. MOD#3 Move or Add Grommets (customer to specify location) $63 Each
4. MOD#4 Reinforced Drawers - factory installed metal support bars. (Available on lateral files and on 16”D file drawers)Applicable on filing in most casegoods 24”D or under. Contact Customer Service or Specials Costing for applicability on other items.
Per$30 Drawer
5. MOD#5 Fabric Tackboards (any size reduction or an increase in height up to 6”) $50
6. MOD#6 Contemporary - BBF to FF No Upcharge
7. MOD#7 Contemporary - FF to BBF No Upcharge
8. MOD#8 Wire Access Cutout in Back Panel (4" x 4") - Available on Bridges, Returns, Credenzas, & Corner Units.Cannot be located closer than 3" from any edge. For units with Signature Band, top clearance is 6". (customer to specify location)
No Upcharge
9. MOD#9 Wire Access Cutout in Back Panel (12" x 12") - Available on Bridges, Returns, Credenzas, & Corner Units.Cannot be located closer than 3" from any edge. For units with Signature Band, top clearance is 6". (customer to specify location)
No Upcharge
10. MOD#10 Locking (non-electronic) for wood or laminate doors only. Per individual storage section (no vertical divider). $150
11. MOD#11 Seating with 2 Different Fabrics Two Same Grade Fabrics = Next Higher Grade Two Different Grade Fabrics = Higher of the Two Three Different Grade Fabrics = Highest of the Three (Note: Contrasting welt only available in a single fabric. Two-toned welt is not available.) (two-tone diagram required from customer at time of ordering - contact customer service)
12. MOD#12 Plywood Drawers $50 Each
13. MOD#13 Venting Slots (customer to specify location) $75
14. MOD#14 All Bullets or P Tables Removal of Modesty Panel No Upcharge
15. MOD#15 Highback or Wallmount Organizers Removal of Doors No Upcharge
16. MOD#16 Laser Logo Burn In ONE TIME SET UP FEE NET $125 + NET $20 Each
17. MOD#17 Wire Access Door in Back Panel (18" x 15") Left Hinge - Available on Bridges, Returns, Credenzas, & Corner Units.Top clearance is 3". (customer to specify location)
$445 Each
18. MOD#18 Set of 4 Casters - Available on some Pedestals $55
19. MOD#19 Full Wood Panel Set of Doors on Bookcase 72" Tall and under $800
20. MOD#20 Full Wood Panel Set of Doors on Bookcase 30" Tall and under $375
22. MOD#22 Casegood Units Cutdown — TFL, HPL and Veneer Width Only (cannot affect drawer size, glass or metal items) 15% Upcharge
23. MOD#23 Increase Worksurface or Top Depth from 48”D – 59.5”D — TFL, HPL and Veneer Only Excludes 3D Laminate Tops (Note: larger tops may require proportionately larger bases and support)
35% Upcharge
24. MOD#24 Specify Built Up TFL Units Only in Two Color Options Must Indicate Specific Laminate Placement (drawing recommended)
No Upcharge
Liability Clause:This pricing structure represents the more commonly requested product modifications. Although these modifications can be applied to the vast majority of products listed in our price books, some modifications cannot be applied to products with non-standard design features. Please contact your Customer Service Representative if you require assistance.
How to Order:
ExampleQty MOD# Model Number Modification Detail Options Price
1 MOD#2 34-10824MCT cut down to 104” wide B5A - BUW - G1 - G1 $1,409 + $100 = $1,509
879ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
VENEER
Bookmatched cherry, walnut and maple veneers. Quartered cherry, walnut and oak veneers.
PRIMARY WORKSURFACE
Worksurfaces are 1.1875" thick. Durable scratch-resistant matte finish on all units. Optional high pressure laminate tops available.
DRAWER PULL
Six drawer pull designs in silver, black and satin nickel.
WIRE MANAGEMENT
Wire management is standard in returns, bridge units, credenzas, corner units and hutch units. Wire management options available on desk tops.
DRAWERS
Engineered composite wood material with mitered corners provides excellent strength and durability. Wood grain patterned drawer sides provide a consistent appearance and are stain resistant and easily cleaned.
Optional hardwood drawer interiors are available at an upcharge. Please contact Customer Service for price quote. To order, specify each item: MOD - wood drawer interiors (HWD)
FILE DRAWERS
File drawers have full extension, progressive action slides with steel ball bearing suspensions. They accommodate letter or legal filing.
LOCKING
Pedestal locks secure all drawers with the turn of a single key. All units are standard shipped keyed alike. Specific key requirements may be specified on the purchase order at the time the order is placed for field installation (ships separately). Removable lock cores allow for re-keying in the field.
FILING
See page 1165 for diagrams of all Vegas filing capabilities.
FINISH OPTIONS
Veneer
Quartered Flat CutQEC Molasses MMC Mocha
DST Desert MLC Sienna
MNW Root BUW Burnished
MGW Toffee EBY Ebony
MRO Linen MVW Port
OSL Oslo MBM Blonde
PCO Pecan MHM Honey
MGO Steel
HPL Wood Grain Laminate
Quartered Flat CutQEP Molasses CMP Mocha
NWP Root CHP Sienna
MEP Toffee BUP Burnished
COP Linen VMP Port
PCP Pecan BEP Blonde
STP Steel HNP Honey
Fabric Partners
ARC-COM CARNEGIE HELVETIA LEATHER MOMENTUM ULTRAFABRICSwww.arc-com.com www.carnegiefabrics.com www.helvetialeather.com www.themomgroup.com www.ultrafabricsllc.com
ARCHITEX DESIGNTEX MAHARAM SPRADLING INTERNATIONAL, INC.www.architex-ljh.com www.designtex.com www.maharam.com www.spradlingvinyl.com
CAMIRA GREEN HIDES MAYER FABRICS STINSONwww.camirafabrics.com www.greenhides.com www.mayerfabrics.com www.cfstinson.com
880ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
EDGE OPTIONS
(FA) 1" Knife (5% upcharge) (FB) 2" Knife (5% upcharge) (EF) Square (H1X) 1" Flat Knife (H1Y) 2" Flat Knife (User side of worksurfaces) (Approach side of desks) (User side of worksurfaces) (Approach side of desks)
DRAWER PULL OPTIONS
(B7P) Lithe Matte Silver (VA) Oval Black (VC) Ice Black (VB) Oval Satin Nickel (VD) Ice Satin Nickel Note: Vertical application only for (VC) and (VD)
(VE) Duet Black (VG) Forte Black (VJ) Era Black (VF) Duet Satin Nickel (VH) Forte Satin Nickel (VK) Satin Nickel
881ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
STANDARD GROMMETS (FACTORY INSTALLED)
Grommets are standard on these secondary worksurfaces: returns, bridge units, credenzas, corner units and hutch units.
overall size 3.375" x 2" inside dimensions with inserts 1.5" x 0.75" inside dimensions without inserts 2.9375" x 1.5"
OPTIONAL WORKSURFACE GROMMETS (FACTORY INSTALLED)
Grommets Location Option: listG1 No GrommetG2 Grommet on Right $ 65G3 Grommet in Center 65G4 Grommet on Left 65G5 Grommets Right and Left 130G6 Grommets Right and Center 130G7 Grommets Left and Center 130G8 Grommets Right, Left and Center 195
Note: Desk grommet options: G1, G2, G4 and G5 only.
Note: Bridges, Returns, Kneespace Credenzas are standard with G3 center grommet; for other grommet options on these units: Add upcharge of $65 list for grommets specified in addition to center grommet; i.e. for G5 Right and Left, add $130 list; for G6 Right and Center, add $65 list.
Grommet color will match drawer pull color. For Bullet and P-Tables, Bridges, Corner Units, Desk Shell, Credenza Shell and Modular Cabinet Tops, specify grommet color:
Grommet Color: G1 No Grommet LJ Black LK Satin Nickel
882ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
FULL DOUBLE PEDESTAL DESK STANDARD FEATURES
• Straight Front Modesty Panel
• Two Box Drawers
• Three File Drawers (Letter or Legal)
• Locking Pedestals
• Adjustable Levelers
• Optional Center Drawer (see page 934)
RECTANGULAR TOP
model w d h wt cu ft list
3-6032DP2 60 32 30 285 40 $ 2,751
• 5"D Overhang
• 28.75"W Kneespace
3-6632DP2 66 32 30 294 44 $ 2,834
• 5"D Overhang
• 34.75"W Kneespace
3-7232DP2 72 32 30 315 48 $ 2,865
• 5"D Overhang
• 40.75"W Kneespace
3-7238DP2 72 38 30 382 57 $ 2,898
• 11"D Overhang
• 40.75"W Kneespace
BOW SHAPED TOP
model w d h wt cu ft list
3-7238DPB2 72 38 30 379 57 $ 3,360
3-7242DPB2 72 42 30 393 62 $ 3,619
• Bow Shaped Top
• 11"D Overhang
• 40.75"W Kneespace
OPTIONS
Finish Edge Pull Desk Modesty Veneer Grommet Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FB 2" Knife (5% upcharge)
(Approach Side of Desks)
3-6032DP2 $1383-6632DP2 $1423-7232DP2 $1433-7238DP2 $1453-7238DPB2 $1683-7242DPB2 $181
EF Square
H1Y 2" Flat Knife
(Approach Side of Desks)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
GN Straight Grain - StandardGP Half Diamond $274
G1 No Grommet - StandardG2 Right $65G4 Left $65G5 Right and Left $130
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | desk modesty veneer | grommet | key. See page 879 for the designator finish name.
MODEL NUMBER
3-7238DPB2
Finish Edge Pull Desk Modesty Veneer Grommet Key
MGO FB B7P GN G1 NM
883ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
TABLE/TABLE DESK STANDARD FEATURES
• Use Alone or in an L or U Configuration
• Rectangular Top
• Adjustable Height Mechanism
• Table Maximum Weight Allowance is 75 lbs.
• Height Range from 27" to 51.75"H
• Cannot be Stopped at any Position within Height Range
• Program up to Three Height Settings
• Floor Depth 26"D
• Legs Rated at 180 lbs. per Leg
• Adjustable Levelers
model w d h wt cu ft list
3-7238HAR 72 38 27-51.75 236 48 $ 3,532
OPTIONS
Finish Edge Modesty
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FB 2" Knife $200(5% upcharge)
(Approach Side of Desks)
EF Square
H1Y 2" Flat Knife
(Approach Side of Desks)
FR No Modesty - Standard
Modesty $367Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
GW Acrylic $476GX White $405
HOW TO ORDER SPECIFY: Finish | edge | modesty. See page 879 for the designator finish name.
MODEL NUMBER
3-7238HAR
Finish Edge Modesty
MGO FB FR
884ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
TABLE STANDARD FEATURES
• One End Panel
• Cannot be Used as a Freestanding Unit
• Adjustable Levelers
• Optional Center Drawer (see page 934)
• Ships KD
BULLET SHAPED TOP
model w d h wt cu ft list
3-7232EBTL2 LEFT 72 32 30 156 14 $ 2,469
• End Panel on Right
• 32"W Side has Square Edge
3-7238EBTL2 LEFT 72 38 30 164 16 $ 2,521
• End Panel on Right
• 38"W Side has Square Edge
3-8438EBTL2 LEFT 84 38 30 198 18 $ 2,928
• End Panel on Right
• 38"W Side has Square Edge
3-7232EBTR2 RIGHT 72 32 30 156 14 $ 2,469
• End Panel on Left
• 32"W Side has Square Edge
3-7238EBTR2 RIGHT 72 38 30 164 16 $ 2,521
• End Panel on Left
• 38"W Side has Square Edge
3-8438EBTR2 RIGHT 84 38 30 198 18 $ 2,928
• End Panel on Left
• 38"W Side has Square Edge
• Profiled on Rim of Sides and Curved End
• Flat on Straight End
• Can be Used with Standard Returns and Bridges (see pages 908-909) and Modular Return Tops (see page 929)
OPTIONS
Finish Edge Modesty Base Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-7232EBTL2 and
3-7232EBTR2 $1233-7238EBTL2 and
3-7238EBTR2 $1263-8438EBTL2 and
3-8438EBTR2 $146
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
FR No Modesty - StandardGR Wood Veneer $152GS White Finish $414GT Silver-Framed Frosted
Acrylic Insert $405
Silver Microlinear Acrylic Insert
GU Wood Framed $517GV White Finish Frame $585
Cylinder
MV 3.5" Satin Nickel - StandardMP 4" Black $70MQ 4" Satin Nickel $70MR 4" White $70MS 4" Veneer $441
G1 No Grommet - StandardKP Grommet $65
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | modesty | base | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-7232EBTL2
Finish Edge Modesty Base Grommet Grommet Color
MGO FA FR MV G1 G1
885ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
TABLE STANDARD FEATURES
• One End Panel
• Cannot be Used as a Freestanding Unit
• Adjustable Levelers
• Optional Center Drawer (see page 934)
• Ships KD
P-SHAPED TOP
model w d h wt cu ft list
3-7242EPTL2 LEFT 72 42 30 194 18 $ 2,618
3-8442EPTL2 LEFT 84 42 30 202 20 $ 3,067
• End Panel on Right
3-7242EPTR2 RIGHT 72 42 30 194 30 $ 2,618
3-8442EPTR2 RIGHT 84 42 30 202 20 $ 3,067
• End Panel on Left
• Profiled on Rim
• 38"W Side has Square Edge
• 42"W at Widest Point
OPTIONS
Finish Edge Modesty Base Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-7242EPTL2 and
3-7242EPTR2 $1313-8442EPTL2 and
3-8442EPTR2 $153
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
FR No Modesty - StandardGR Wood Veneer $152GS White Finish $414GT Silver-Framed Frosted
Acrylic Insert $405
Silver Microlinear Acrylic Insert
GU Wood Framed $517GV White Finish Frame $585
Cylinder
MV 3.5" Satin Nickel - StandardMP 4" Black $70MQ 4" Satin Nickel $70MR 4" White $70MS 4" Veneer $441
G1 No Grommet - StandardKP Grommet $65
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | modesty | base | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-7242EPTL2
Finish Edge Modesty Base Grommet Grommet Color
MGO FA FR MV G1 G1
886ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
WORKWALL BULLET SHAPED TOP TABLE STANDARD FEATURES
• Can be Used with Standard Returns and Bridges (see pages 908-909) and Modular Return Tops (see page 929)
• Profiled on Curved Edge and User Side
• Approach Side and 36"W Side has Square Edge
• One End Panel
• Cannot be Used as a Freestanding Unit
• Adjustable Levelers
• Optional Center Drawer (see page 934)
• Ships KD
model w d h wt cu ft list
3-7236EWBL2 LEFT 72 36 30 164 15 $ 2,481
3-8436EWBL2 LEFT 84 36 30 198 17 $ 2,928
• End Panel on Right
3-7236EWBR2 RIGHT 72 36 30 164 15 $ 2,481
3-8436EWBR2 RIGHT 84 36 30 198 17 $ 2,928
• End Panel on Left
OPTIONS
Finish Edge Modesty Base Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife
3-7236EWBL2 and
3-7236EWBR2 $1243-8436EWBL2 and
3-8436EWBR2 $146
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
FR No Modesty - StandardGR Wood Veneer $152GS White Finish $414GT Silver-Framed Frosted
Acrylic Insert $405
Silver Microlinear Acrylic Insert
GU Wood Framed $517GV White Finish Frame $585
Cylinder
MV 3.5" Satin Nickel - StandardMP 4" Black $70MQ 4" Satin Nickel $70MR 4" White $70MS 4" Veneer $441
G1 No Grommet - StandardKP Grommet $65
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | modesty | base | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-7236EWBL2
Finish Edge Modesty Base Grommet Grommet Color
MGO FA FR MV G1 G1
887ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
DOOR/DRAWER CREDENZA STANDARD FEATURES
• Four File Drawers (Letter or Legal)
• Adjustable Shelf Behind Doors
• Locking Pedestals
• Unfinished Back
• Adjustable Levelers
model w d h wt cu ft list
3-6022CRD2 60 22 30 274 29 $ 2,509
3-6622CRD2 66 22 30 282 32 $ 2,694
3-7222CRD2 72 22 30 308 34 $ 2,825
OPTIONS
Finish Edge Pull Back Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife
3-6022CRD2 $1253-6622CRD2 $1353-7222CRD2 $141
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
LW Unfinished - Standard
LX Finished
3-6022CRD2 $2513-6622CRD2 $2693-7222CRD2 $283
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | back | key. See page 879 for the designator finish name.
MODEL NUMBER
3-6022CRD2
Finish Edge Pull Back Key
MGO FA B7P LW NM
888ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
FULL DOUBLE PEDESTAL KNEESPACE CREDENZA STANDARD FEATURES
• Four File Drawers (Letter or Legal)
• Locking Pedestals
• Unfinished Back
• Adjustable Levelers
model w d h wt cu ft list
3-6022CR2 60 22 30 228 29 $ 2,412
3-6622CR2 66 22 30 243 32 $ 2,480
3-7222CR2 72 22 30 258 34 $ 2,616
OPTIONS
Finish Edge Pull Back Grommet Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife
3-6022CR2 $1213-6622CR2 $1243-7222CR2 $131
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
LW Unfinished - Standard
LX Finished
3-6022CR2 $2413-6622CR2 $2483-7222CR2 $262
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and Center $130
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | back | grommet | key. See page 879 for the designator finish name.
MODEL NUMBER
3-6022CR2
Finish Edge Pull Back Grommet Key
MGO FA B7P LW G1 NM
889ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
DOUBLE LATERAL FILE CREDENZA STANDARD FEATURES
• Four Lateral File Drawers (Letter or Legal)
• Drawer Front Lock
• Anti-Tilt Locking System
• Unfinished Back
• Adjustable Levelers
model w d h wt cu ft list
3-6022CLF2 60 22 30 279 29 $ 2,986
OPTIONS
Finish Edge Pull Back Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife $149
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
LW Unfinished - StandardLX Finished $299
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | back | key. See page 879 for the designator finish name.
MODEL NUMBER
3-6022CLF2
Finish Edge Pull Back Key
MGO FA B7P LW NM
890ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
BUFFET CREDENZA STANDARD FEATURES
• Two Drawers • Four Doors - Storage Space with Two Adjustable Shelves
• Unfinished Back
• Adjustable Levelers
model w d h wt cu ft list
3-7236BCC2 71 20 36 314 37 $ 3,922
OPTIONS
Finish Edge Pull Back
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife $196
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
LW Unfinished - StandardLX Finished $392
HOW TO ORDER SPECIFY: Finish | edge | pull | back. See page 879 for the designator finish name.
MODEL NUMBER
3-7236BCC2
Finish Edge Pull Back
MGO FA B7P LW
891ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
HIGHBACK ORGANIZER STANDARD FEATURES
• Wire Management
• 24"D Clearance
• Unfinished Back
• Optional Task Lights (see page 1148)
model w d h wt cu ft list
3-6043HD 60 15 42.5 189 29 $ 2,129
3-6643HD 66 15 42.5 203 31 $ 2,171
3-7243HD 72 15 42.5 215 34 $ 2,259
3-7843HD 78 15 42.5 229 37 $ 2,619
3-8443HD 84 15 42.5 242 40 $ 2,964
• Four Hinged Doors
model w d h wt cu ft list
3-9043HD 90 15 42.5 260 43 $ 3,419
3-9443HD 94 15 42.5 264 44 $ 3,480
3-9643HD 96 15 42.5 268 45 $ 3,535
3-10043HD 100 15 42.5 280 47 $ 3,688
3-10643HD 106 15 42.5 285 49 $ 3,839
• Six Hinged Doors
OPTIONS
Finish Door Back
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HC Wood - Standard
HD White Finish
Four Door $330Six Door $496
JH Silver-Framed Frosted Glass
Insert
Four Door $172Six Door $274
Silver Microlinear Acrylic Insert
Four Door $634Six Door $953JJ Wood Framed
JK White Finish Frame
LW Unfinished - Standard
LX Finished
3-6043HD $2133-6643HD $2173-7243HD $2263-7843HD $2623-8443HD $2963-9043HD $3423-9443HD $3483-9643HD $3543-10043HD $3693-10643HD $384
HOW TO ORDER SPECIFY: Finish | door | back. See page 879 for the designator finish name.
MODEL NUMBER
3-6043HD
Finish Door Back
MGO HC LW
892ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
ONE-PIECE TACKBOARD STANDARD FEATURES
model w d h wt cu ft
FT1113 58.38 0.5 22.63 8 2
• Use with 3-6043HD
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2 n/a 332 365 403 450 515 609 703 798 892 986 1,080 1,174 1,268 1,362 1,456 n/a n/a n/a
model w d h wt cu ft
FT1112 64.38 0.5 22.63 9 2
• Use with 3-6643HD
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2 n/a 347 380 418 465 530 624 718 813 907 1,001 1,095 1,189 1,283 1,377 1,471 n/a n/a n/a
model w d h wt cu ft
FT1111 70.38 0.5 22.63 10 2
• Use with 3-7243HD
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2.5 n/a 352 393 440 499 581 699 816 934 1,051 1,169 1,287 1,404 1,522 1,639 1,757 n/a n/a n/a
model w d h wt cu ft
FT1110 76.38 0.5 22.63 11 2
• Use with 3-7843HD
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2.5 n/a 363 404 451 510 592 710 827 945 1,062 1,180 1,298 1,415 1,533 1,650 1,768 n/a n/a n/a
model w d h wt cu ft
FT1109 82.38 0.5 22.63 12 2
• Use with 3-8443HD
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2.5 n/a 369 410 457 516 598 716 833 951 1,068 1,186 1,304 1,421 1,539 1,656 1,774 n/a n/a n/a
model w d h wt cu ft
FT1108 88.38 0.5 22.63 14 2
• Use with 3-9043HD
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
3 n/a 529 578 635 705 804 945 1,086 1,227 1,368 1,509 1,651 1,792 1,933 2,074 2,215 n/a n/a n/a
model w d h wt cu ft
FT1148 92.38 0.5 22.63 15 2
• Use with 3-9443HD
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
3 n/a 537 586 643 713 812 953 1,094 1,235 1,376 1,517 1,659 1,800 1,941 2,082 2,223 n/a n/a n/a
model w d h wt cu ft
FT1107 94.38 0.5 22.63 15 2
• Use with 3-9643HD
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
3 n/a 545 594 651 721 820 961 1,102 1,243 1,384 1,525 1,667 1,808 1,949 2,090 2,231 n/a n/a n/a
OPTIONS
Fabric/Grade
Grade, Vendor, Pattern, Color
NOTE: Fabric must be tested and approved
for tackboard use/compatibility
HOW TO ORDER SPECIFY: Textile pattern and color. See page 879 for a full list of our graded-in fabric options.
MODEL NUMBER
FT1113
Fabric/Grade
Grade 3, Momentum, Hue, Smoke
893ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
TWO-PIECE TACKBOARD STANDARD FEATURES
model w d h wt cu ft
FT1147 98.38 0.5 22.63 15 2
• Use with 3-10043HD
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
3 n/a 549 598 655 725 824 965 1,106 1,247 1,388 1,529 1,671 1,812 1,953 2,094 2,235 n/a n/a n/a
model w d h wt cu ft
FT1106 104.38 0.5 22.63 16 2
• Use with 3-10643HD
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
3 n/a 558 607 664 734 833 974 1,115 1,256 1,397 1,538 1,680 1,821 1,962 2,103 2,244 n/a n/a n/a
OPTIONS
Fabric/Grade
Grade, Vendor, Pattern, Color
NOTE: Fabric must be tested and approved
for tackboard use/compatibility
HOW TO ORDER SPECIFY: Textile pattern and color. See page 879 for a full list of our graded-in fabric options.
MODEL NUMBER
FT1147
Fabric/Grade
Grade 3, Momentum, Hue, Smoke
894ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
WALLMOUNT ORGANIZER STANDARD FEATURES
• Optional Task Lights (see page 1148)
model w d h wt cu ft list
3-3019HDW 30 15 18.5 120 7 $ 1,078
3-3619HDW 36 15 18.5 130 9 $ 1,172
3-4219HDW 42 15 18.5 140 10 $ 1,336
• Two Hinged Doors
model w d h wt cu ft list
3-4819HDW 48 15 18.5 150 11 $ 1,520
• Three Hinged Doors
model w d h wt cu ft list
3-5419HDW 54 15 18.5 155 12 $ 1,959
3-6019HDW 60 15 18.5 160 14 $ 2,005
3-6619HDW 66 15 18.5 170 15 $ 2,051
3-7219HDW 72 15 18.5 185 16 $ 2,130
• Four Hinged Doors
OPTIONS
Finish Door
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMNW
MBMMHM
HC Wood - StandardHD White Finish
Two Hinged Doors $164Three Hinged Doors $248Four Hinged Doors $330
JH Silver-Framed Frosted Glass Insert
Two Hinged Doors $97Three Hinged Doors $146Four Hinged Doors $172
Silver Microlinear Acrylic Insert
JJ Wood Framed
JK White Finish Frame
Two Hinged Doors $317Three Hinged Doors $476Four Hinged Doors $634
HOW TO ORDER SPECIFY: Finish | door. See page 879 for the designator finish name.
MODEL NUMBER
3-3019HDW
Finish Door
MGO HC
895ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
WALLMOUNT OPEN SHELF ORGANIZER STANDARD FEATURES
• Adjustable Shelf • Optional Task Lights (see page 1148)
model w d h wt cu ft list
3-3019HSW 30 14 18.5 40 7 $ 844
3-3619HSW 36 14 18.5 45 9 $ 923
3-4219HSW 42 14 18.5 50 10 $ 995
OPTIONS
Finish
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HOW TO ORDER SPECIFY: Finish. See page 879 for the designator finish name.
MODEL NUMBER
3-3019HSW
Finish
MGO
896ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
ONE-PIECE TACKBOARD STANDARD FEATURES
model w d h wt cu ft
FT2111 30 0.5 23.75 7 2
• Use with 3-3019HDW or 3-3019HSW
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2 n/a 305 338 376 423 488 582 676 771 865 959 1,053 1,147 1,241 1,335 1,429 n/a n/a n/a
model w d h wt cu ft
FT2110 36 0.5 23.75 7 2
• Use with 3-3619HDW or 3-3619HSW
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2 n/a 305 338 376 423 488 582 676 771 865 959 1,053 1,147 1,241 1,335 1,429 n/a n/a n/a
model w d h wt cu ft
FT2109 42 0.5 23.75 8 2
• Use with 3-4219HDW or 3-4219HSW
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2 n/a 317 350 388 435 500 594 688 783 877 971 1,065 1,159 1,253 1,347 1,441 n/a n/a n/a
model w d h wt cu ft
FT2108 48 0.5 23.75 9 2
• Use with 3-4819HDW
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2 n/a 317 350 388 435 500 594 688 783 877 971 1,065 1,159 1,253 1,347 1,441 n/a n/a n/a
model w d h wt cu ft
FT2107 54 0.5 23.75 10 2
• Use with 3-5419HDW
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2 n/a 328 361 399 446 511 605 699 794 888 982 1,076 1,170 1,264 1,358 1,452 n/a n/a n/a
model w d h wt cu ft
FT2106 60 0.5 23.75 10 2
• Use with 3-6019HDW
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2.5 n/a 341 382 429 488 570 688 805 923 1,040 1,158 1,276 1,393 1,511 1,628 1,746 n/a n/a n/a
model w d h wt cu ft
FT2105 66 0.5 23.75 11 2
• Use with 3-6619HDW
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2.5 n/a 341 382 429 488 570 688 805 923 1,040 1,158 1,276 1,393 1,511 1,628 1,746 n/a n/a n/a
model w d h wt cu ft
FT2104 72 0.5 23.75 12 2
• Use with 3-7219HDW
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
2.5 n/a 341 382 429 488 570 688 805 923 1,040 1,158 1,276 1,393 1,511 1,628 1,746 n/a n/a n/a
OPTIONS
Fabric/Grade
Grade, Vendor, Pattern, Color
NOTE: Fabric must be tested and approved
for tackboard use/compatibility
HOW TO ORDER SPECIFY: Textile pattern and color. See page 879 for a full list of our graded-in fabric options.
MODEL NUMBER
FT2111
Fabric/Grade
Grade 3, Momentum, Hue, Smoke
897ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
WALL SHELF STANDARD FEATURES
• Mounting Hardware Included
model w d h wt cu ft list
3-0830WS 30 8 2.25 14 1 $ 482
3-0836WS 36 8 2.25 17 1 $ 509
3-0842WS 42 8 2.25 20 1 $ 539
3-0848WS 48 8 2.25 23 1 $ 565
3-0854WS 54 8 2.25 26 2 $ 593
3-0860WS 60 8 2.25 28 2 $ 621
3-0866WS 66 8 2.25 31 2 $ 647
3-0872WS 72 8 2.25 34 2 $ 675
OPTIONS
Finish
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
Paint
BLK WHT
HOW TO ORDER SPECIFY: Finish. See page 879 for the designator finish name.
MODEL NUMBER
3-0830WS
Finish
MGO
898ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
HINGED STORAGE WARDROBE STANDARD FEATURES
• Unfinished Back • Adjustable Levelers
model w d h wt cu ft list
3-7216LSW2 LEFT HINGED 15.63 24 72.5 112 21 $ 2,429
3-7216RSW2 RIGHT HINGED 15.63 24 72.5 112 21 $ 2,429
• Full Length Storage with Hanging Bar
• One Adjustable Shelf
model w d h wt cu ft list
3-7230SW2 30 24 72.5 201 37 $ 3,504
3-7236SW2 36 24 72.5 217 44 $ 4,083
LEFT SIDE:
• Three Adjustable Shelves
• One Stationary Shelf
RIGHT SIDE:
• Wardrobe with Metal Coat Rod
• One Adjustable Shelf
OPTIONS
Finish Pull Back
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
LW Unfinished - Standard
LX Finished
3-7216LSW2 and 3-7216RSW2 $2433-7230SW2 $3503-7236SW2 $408
HOW TO ORDER SPECIFY: Finish | pull | back. See page 879 for the designator finish name.
MODEL NUMBER
3-7216LSW2
Finish Pull Back
MGO B7P LW
899ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
STORAGE CABINET WITH LATERAL FILE STANDARD FEATURES
• Unfinished Back
• Adjustable Levelers
TOP SECTION:
• Two Adjustable Shelves
BOTTOM SECTION:
• Two Lateral File Drawers (Letter or Legal)
• Anti-Tilt Central Locking
model w d h wt cu ft list
3-7230SCL2 30 24 72.5 231 37 $ 4,050
3-7236SCL2 36 24 72.5 247 44 $ 4,598
OPTIONS
Finish Door Pull Back Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HC Wood - StandardHD White Finish $496JH Silver-Framed Frosted Glass
Insert $274
Silver Microlinear Acrylic Insert $953JJ Wood Framed
JK White Finish Frame
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
LW Unfinished - Standard
LX Finished
3-7230SCL2 $4053-7236SCL2 $460
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | door | pull | back | key. See page 879 for the designator finish name.
MODEL NUMBER
3-7230SCL2
Finish Door Pull Back Key
MGO HC B7P LW NM
900ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
LATERAL FILE STANDARD FEATURES
• Letter or Legal Filing
• Drawer Front Lock
• Anti-Tilt Locking System
• Unfinished Back
• Adjustable Levelers
model w d h wt cu ft list
3-3022LF2 30 22 30 173 15 $ 1,595
3-3622LF2 36 22 30 186 18 $ 1,927
• Two Drawers
3-3056LF4 30 22 57.75 269 27 $ 2,551
3-3656LF4 36 22 57.75 288 32 $ 2,833
• Four Drawers
OPTIONS
Finish Edge Pull Back Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
(Not Available on 3-3056LF4 or #-3656LF4)QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-3022LF2 $803-3622LF2 $963-3056LF4 $1283-3656LF4 $142
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
LW Unfinished - Standard
LX Finished
3-3022LF2 $1603-3622LF2 $1933-3056LF4 $2553-3656LF4 $283
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | back | key. See page 879 for the designator finish name.
MODEL NUMBER
3-3022LF2
Finish Edge Pull Back Key
MGO FA B7P LW NM
901ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
BOOKCASE STANDARD FEATURES
• Unfinished Back • Adjustable Levelers
model w d h wt cu ft list
3-3030BC 30 14 29.88 78 10 $ 1,065
• One Adjustable Shelf
• One Stationary Shelf
3-3048BC 30 14 47.88 103 16 $ 1,218
• Two Adjustable Shelves
• One Stationary Shelf
3-3060BC 30 14 59.88 112 20 $ 1,518
• Two Adjustable Shelves
• Two Stationary Shelves
3-3072BC 30 14 72.5 150 23 $ 1,775
• Three Adjustable Shelves
• Two Stationary Shelves
model w d h wt cu ft list
3-3630BC 36 14 29.88 90 12 $ 1,109
• One Adjustable Shelf
• One Stationary Shelf
3-3648BC 36 14 47.88 113 19 $ 1,420
• Two Adjustable Shelves
• One Stationary Shelf
3-3660BC 36 14 59.88 122 23 $ 1,664
• Two Adjustable Shelves
• Two Stationary Shelves
3-3672BC 36 14 72.5 160 28 $ 1,994
• Three Adjustable Shelves
• Two Stationary Shelves
OPTIONS
Finish Back Shelf Finish
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
LW Unfinished - Standard
LX Finished
3-3030BC $1073-3048BC $1223-3060BC $1523-3072BC $1783-3630BC $1113-3648BC $1423-3660BC $1663-3672BC $199
LN Wood Finish - Standard
LP White Finish
3-3030BC $1103-3048BC $1643-3060BC $2243-3072BC $2743-3630BC $1153-3648BC $1903-3660BC $2433-3672BC $305
HOW TO ORDER SPECIFY: Finish | back | shelf finish. See page 879 for the designator finish name.
MODEL NUMBER
3-3030BC
Finish Back Shelf Finish
MGO LW LN
902ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
BOOKCASE STANDARD FEATURES
• Unfinished Back
CUBE
model w d h wt cu ft list
3-30CBC 30 14 30 57 10 $ 1,374
• Two Adjustable Shelves
• Two Stationary Shelves
3-60CBC 30 14 57.25 106 20 $ 1,965
• Four Adjustable Shelves
• Four Stationary Shelves
ORGANIZER
model w d h wt cu ft list
3-3043BC 30 14 42.5 71 14 $ 1,101
3-3643BC 36 14 42.5 76 17 $ 1,230
• One Adjustable Shelf
• One Stationary Shelf
• Adjustable Levelers
OPTIONS
Finish Back Shelf Finish
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
LW Unfinished - Standard
LX Finished
3-30CBC $1373-60CBC $1973-3043BC $1103-3643BC $123
LN Wood Finish - Standard
LP White Finish
3-30CBC $2243-60CBC $4413-3043BC and 3-3643BC $110
HOW TO ORDER SPECIFY: Finish | back | shelf finish. See page 879 for the designator finish name.
MODEL NUMBER
3-30CBC
Finish Back Shelf Finish
MGO LW LN
903ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
MOBILE PEDESTAL STANDARD FEATURES
• One File Drawer (Letter or Legal) • Locking Pedestal
model w d h wt cu ft list
3-1620MP2 15.63 20 27.69 95 7 $ 1,538
• One Tray and One Box Drawer
• Square Edge
WITH CUSHION
model w d h wt cu ft
3-1620MPC2 15.63 20 20.94 110 6
• One Tray Drawer
• Seat Cushion on Top of Unit
yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3
1 n/a 1,668 1,684 1,703 1,727 1,760 1,807 1,854 1,901 1,948 1,995 2,042 2,089 2,136 2,183 2,230 1,891 1,938 1,985
OPTIONS
Finish Pull Key Fabric/Grade (3-1620MPC2 only)
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
Grade, Vendor, Pattern, Color
HOW TO ORDER SPECIFY: Finish | pull | key | textile pattern and color (if applicable). See page 879 for a full list of finishes and of graded-in fabric options.
MODEL NUMBER
3-1620MP2
Finish Pull Key Fabric/Grade (3-1620MPC2 only)
MGO B7P NM Grade 3, Momentum, Hue, Smoke
904ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CONFIGURATIONS - RIGHT U
• To build a U, select a single pedestal desk with a bridge and a single pedestal credenza. Right U's require a left pedestal desk with right pedestal credenza (bridge in between). Left U's require a right pedestal desk with a left pedestal credenza (bridge in between).
w d h list
Total Unit Dimensions 72 108 30 $ 5,173
CONSISTS OF:
model w d h wt cu ft list
3-7238LPD2 LEFT 72 38 30 301 57 $ 2,534
• Straight Front Modesty Panel
• Two Box Drawers
• One File Drawer (Letter or Legal)
• Locking Pedestal
• 11"D Overhang
• Adjustable Levelers
• Optional Center Drawer (see page 934)
model w d h wt cu ft list
3-2248BR2 22 48 30 99 7 $ 613
• Adjustable Levelers
model w d h wt cu ft list
3-7222CRR2 RIGHT 72 22 30 218 34 $ 2,026
• Two File Drawers (Letter or Legal)
• Locking Pedestal
• Unfinished Back
• Adjustable Levelers
DESK
BRIDGE
CREDENZA
OPTIONS
Finish EdgePull (not available on 3-2248BR2)
Desk Modesty Veneer (3-7238LPD2 only) Back (3-7222CRR2 only) Grommet
Key (not available on 3-2248BR2)
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-2248BR2 $313-7222CRR2 $101
FB 2" Knife (5% upcharge)
(Approach Side of Desks)
3-7238LPD2 $127
EF Square
H1Y 2" Flat Knife
(Approach Side of Desks)
(3-7238LPD2 only)
H1X 1" Flat Knife
(User Side of Worksurfaces)
(3-7222CRR2 only)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
GN Straight Grain -
StandardGP Half Diamond $274
LW Unfinished - StandardLX Finished $203
3-7238LPD2
G1 No Grommet -
StandardG2 Right $65G4 Left $65G5 Right and Left $130
3-2248BR2 and
3-7222CRR2
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and
Center $130
NM Locking - Standard
Key (#345)
H2X Locking - Key
Specific
NOTE: Lock Core Order
Form on page K must
be included when
ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | desk modesty veneer (if applicable) | back (if applicable) | grommet | key (if applicable). See page 879 for the designator finish name.
MODEL NUMBER
3-7238LPD2
Finish EdgePull (not available on 3-2248BR2)
Desk Modesty Veneer (3-7238LPD2 only) Back (3-7222CR2 only) Grommet
Key (not available on 3-2248BR2)
MGO FB B7P GN LW G1 NM
905ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CONFIGURATIONS - RIGHT L
• To build an L, select a single pedestal desk and a return. Right L's require a left pedestal desk with right pedestal return. Left L's require a right pedestal desk with left pedestal return.
w d h list
Total Unit Dimensions 72 86 30 $ 4,305
CONSISTS OF:
model w d h wt cu ft list
3-7238LPD2 LEFT 72 38 30 301 57 $ 2,534
• Straight Front Modesty Panel
• Two Box Drawers
• One File Drawer (Letter or Legal)
• Locking Pedestal
• 11"D Overhang
• Adjustable Levelers
• Optional Center Drawer (see page 934)
model w d h wt cu ft list
3-2248RPR2 RIGHT 22 48 30 158 24 $ 1,771
• Two File Drawers (Letter or Legal)
• Locking Pedestal
• Adjustable Levelers
DESK
RETURN
OPTIONS
Finish Edge PullDesk Modesty Veneer (3-7238LPD2 only) Grommet Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-2248RPR2 $89
FB 2" Knife (5% upcharge)
(Approach Side of Desks)
3-7238LPD2 $127
EF Square
H1Y 2" Flat Knife
(Approach Side of Desks)
(3-7238LPD2 only)
H1X 1" Flat Knife
(User Side of Worksurfaces)
(3-2248RPR2 only)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
GN Straight Grain - StandardGP Half Diamond $274
3-7238LPD2
G1 No Grommet - StandardG2 Right $65G4 Left $65G5 Right and Left $130
3-2248RPR2
G1 No Grommet
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and Center $130
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | desk modesty veneer (if applicable) | grommet | key. See page 879 for the designator finish name.
MODEL NUMBER
3-7238LPD2
Finish Edge PullDesk Modesty Veneer (3-7238LPD2 only) Grommet Key
MGO FB B7P GN G1 NM
906ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
FULL SINGLE PEDESTAL DESK STANDARD FEATURES
• Straight Front Modesty Panel
• Two Box Drawers
• One File Drawer (Letter or Legal)
• Locking Pedestal
• Adjustable Levelers
• Optional Center Drawer (see page 934)
RECTANGULAR TOP
model w d h wt cu ft list
3-6632LPD2 LEFT 66 32 30 261 44 $ 2,387
3-6632RPD2 RIGHT 66 32 30 261 44 $ 2,387
• 5"D Overhang
RECTANGULAR TOP
model w d h wt cu ft list
3-7232LPD2 LEFT 72 32 30 285 48 $ 2,461
• 5"D Overhang
3-7238LPD2 LEFT 72 38 30 301 57 $ 2,534
• 11"D Overhang
3-7232RPD2 RIGHT 72 32 30 285 48 $ 2,461
• 5"D Overhang
3-7238RPD2 RIGHT 72 38 30 301 57 $ 2,534
• 11"D Overhang
BOW SHAPED TOP
model w d h wt cu ft list
3-7238LPDB2 LEFT 72 38 30 349 57 $ 2,861
3-7242LPDB2 LEFT 72 42 30 355 62 $ 3,146
3-7238RPDB2 RIGHT 72 38 30 349 57 $ 2,861
3-7242RPDB2 RIGHT 72 42 30 355 62 $ 3,146
• Bow shaped Top
• 11"D Overhang
OPTIONS
Finish Edge Pull Desk Modesty Veneer Grommet Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FB 2" Knife (5% upcharge)
(Approach Side of Desks)
3-6632LPD2 and
3-6632RPD2 $1193-7232LPD2 and
3-7232RPD2 $1233-7238LPD2 and
3-7238RPD2 $1273-7238LPDB2 and
3-7238RPDB2 $1433-7242LPDB2 and
3-7242RPDB2 $157
EF Square
H1Y 2" Flat Knife
(Approach Side of Desks)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
GN Straight Grain - StandardGP Half Diamond $274
G1 No Grommet - StandardG2 Right $65G4 Left $65G5 Right and Left $130
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | desk modesty veneer | grommet | key. See page 879 for the designator finish name.
MODEL NUMBER
3-7238LPDB2
Finish Edge Pull Desk Modesty Veneer Grommet Key
MGO FB B7P GN G1 NM
907ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CORNER UNIT STANDARD FEATURES
• Grommet in Top
• Grain Runs from Front to Back - Perpendicular to User Side
• User Side and Connecting Ends of Top are Profiled
• Approach Sides of Top (Backs) are Flat
• Shaped Edges Connect to Modular Return Tops, (see page 929), Standard Returns or Standard Bridges (see pages 908-909)
• Cannot be Used with Modular Tops (MCT's), Workwall Knife Tables, Cockpit Desks or Cockpit Bullets
• 10"W Storage Shelf
• Adjustable Levelers
model w d h wt cu ft list
3-3636CU2 36 36 30 130 28 $ 1,800
3-4242CU2 42 42 30 159 37 $ 1,839
OPTIONS
Finish Edge Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-3636CU2 $903-4242CU2 $92
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
LJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-3636CU2
Finish Edge Grommet Color
MGO FA LJ
908ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
FULL SINGLE PEDESTAL RETURN STANDARD FEATURES
• Two File Drawers (Letter or Legal)
• Locking Pedestal
• Reverse Shape Connecting Edge
• Cannot be Used with Workwall Knife Tables, Cockpit Desks or Cockpit Bullets
• Adjustable Levelers
model w d h wt cu ft list
3-2242LPR2 LEFT 22 42 30 147 21 $ 1,688
3-2248LPR2 LEFT 22 48 30 158 24 $ 1,771
3-2242RPR2 RIGHT 22 42 30 147 21 $ 1,688
3-2248RPR2 RIGHT 22 48 30 158 24 $ 1,771
OPTIONS
Finish Edge Pull Grommet Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-2242LPR2 and 3-2242RPR2 $843-2248LPR2 and 3-2248RPR2 $89
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and Center $130
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | grommet | key. See page 879 for the designator finish name.
MODEL NUMBER
3-2242LPR2
Finish Edge Pull Grommet Key
MGO FA B7P G1 NM
909ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
BRIDGE STANDARD FEATURES
• Reverse Shape Connecting Edges • Cannot be Used with Workwall Knife Tables Cockpit Desks or Cockpit Bullets
model w d h wt cu ft list
3-2242BR2 22 42 30 88 6 $ 561
3-2248BR2 22 48 30 99 7 $ 613
• Adjustable Levelers
CURVED
model w d h wt cu ft list
3-2242BRC2 22 42 30 84 6 $ 672
3-2248BRC2 22 48 30 93 7 $ 733
• Top Curved on User Side
• Adjustable Levelers
TOP
model w d h wt cu ft list
3-2242BRT2 22 42 1.19 40 2 $ 455
3-2248BRT2 22 48 1.19 48 3 $ 518
CURVED TOP
model w d h wt cu ft list
3-2242BRCT2 22 42 1.19 38 2 $ 578
3-2248BRCT2 22 48 1.19 45 3 $ 634
• Top Curved on User Side
OPTIONS
Finish Edge Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-2242BR2 $283-2248BR2 $313-2242BRC2 $343-2248BRC2 $373-2242BRT2 $233-2248BRT2 $263-2242BRCT2 $293-2248BRCT2 $32
EF Square
H1X 1" Flat Knife
User Side of Worksurfaces)
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and Center $130
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-2242BR2
Finish Edge Grommet Grommet Color
MGO FA G1 G1
910ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
FULL SINGLE PEDESTAL CREDENZA STANDARD FEATURES
• Unfinished Back • Adjustable Levelers
model w d h wt cu ft list
3-6622CRL2 LEFT 66 22 30 208 32 $ 1,850
3-7222CRL2 LEFT 72 22 30 218 34 $ 2,026
3-6622CRR2 RIGHT 66 22 30 208 32 $ 1,850
3-7222CRR2 RIGHT 72 22 30 218 34 $ 2,026
• Two File Drawers (Letter or Legal)
• Locking Pedestal
LATERAL FILE
model w d h wt cu ft list
3-7222CRLL2 LEFT 72 22 30 228 34 $ 2,279
3-7222CRRL2 RIGHT 72 22 30 228 34 $ 2,279
• Two Lateral File Drawers (Letter or Legal)
• Locking Pedestal
MULTI-FILE LATERAL
model w d h wt cu ft list
3-7222CRLM2 LEFT 72 22 30 228 34 $ 2,646
3-7222CRRM2 RIGHT 72 22 30 228 34 $ 2,646
• Two Box Drawers
• One File Drawer (Letter or Legal)
• One Lateral File Drawer (Letter or Legal)
• Locking File and Lateral File Drawers
OPTIONS
Finish Edge Pull Back Grommet Key
Veneer
QuartereQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-6622CRL2 and
3-6622CRR2 $933-7222CRL2 and
3-7222CRR2 $1013-7222CRLL2 and
3-7222CRRL2 $1143-7222CRLM2 and
3-7222CRRM2 $132
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
LW Unfinished - Standard
LX Finished
3-6622CRL2 and
3-6622CRR2 $1853-7222CRL2 and
3-7222CRR2 $2033-7222CRLL2 and
3-7222CRRL2 $2283-7222CRLM2 and
3-7222CRRM2 $265
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and Center $130
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | back | grommet | key. See page 879 for the designator finish name.
MODEL NUMBER
3-6622CRL2
Finish Edge Pull Back Grommet Key
MGO FA B7P LW G1 NM
911ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CONFIGURATIONS - WORKWALL RIGHT WALL UNIT
w d h list
Total Unit Dimensions 72 142 72.5 $ 11,061
CONSISTS OF:
model w d h wt cu ft list
3-7234EWKL2 72 34 30 163 14 $ 2,481
• See page 912
model w d h wt cu ft list
3-7222MCT2 72 22 1.19 72 4 $ 732
• See page 927
model w d h wt cu ft list
3-2972MCB 72 .75 28.81 34 5 $ 600
• See page 931
model w d h wt cu ft list
3-3620MFC2 36 20 28.81 143 16 $ 1,478
• See page 934
model w d h wt cu ft list
3-7236SCL2 36 24 72.5 247 44 $ 4,598
• See page 899
model w d h wt cu ft list
3-3619HDW 36 15 18.5 130 9 $ 1,172
• See page 894
WORKWALL KNIFE TABLE
MODULAR CABINET TOP
MODULAR CABINET BACK
MODULAR LATERAL FILE PEDESTAL
STORAGE CABINET WITH LATERAL FILE
TWO WALLMOUNT ORGANIZERS (TWO REQUIRED)
HOW TO ORDER See pages referenced under description of individual items for ordering information.
MODEL NUMBER
3-7234EWKL2
912ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CONFIGURATIONS - WORKWALL RIGHT U UNIT
w d h list
Total Unit Dimensions 72 104 30 $ 5,120
CONSISTS OF:
model w d h wt cu ft list
3-7234EWKL2 72 34 30 163 14 $ 2,481
• Knife-Shaped Top
• Profiled on Curved End, Square Edge all other Edges
• One End Panel
• Cannot be Used as a Freestanding Unit
• Adjustable Levelers
• Optional Center Drawer (see page 934)
• Ships KD
model w d h wt cu ft list
3-2248RBRW RIGHT 22 48 30 93 7 $ 613
• Reverse Shaped on Right
• Flat Connecting Edge on Left
• Adjustable Levelers
model w d h wt cu ft list
3-7222CRR2 RIGHT 72 22 30 218 34 $ 2,026
• Two File Drawers (Letter or Legal)
• Locking Pedestal
• Unfinished Back
• Adjustable Levelers
WORKWALL KNIFE TABLE
WORKWALL KNIFE TABLE BRIDGE
CREDENZA
OPTIONS
Finish Edge
Modesty (3-7234EWKL2 only)
Base (3-7234EWKL2 only)
Pull (3-7222CRR2 only)
Back (3-7222CRR2 only) Grommet Grommet Color
Key (3-7222CRR2 only)
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife
(5% upcharge)
(User Side of
Worksurfaces)
3-2248RBRW $313-7222CRR2 $101
FB 2" Knife
(5% upcharge)
(User Side of
Worksurfaces)
3-7234EWKL2 $124
EF Square
H1Y 2" Flat Knife
(User Side of
Worksurfaces)
(3-7234EWKL2
only)
H1X 1" Flat Knife
(User Side of
Worksurfaces)
(3-2248RBRW and
3-7222CRR2 only)
FR No Modesty -
StandardGR Wood Veneer
$152GS White Finish
$414GT Silver-Framed
Frosted Acrylic
Insert $405
Silver Microlinear
Acrylic Insert
GU Wood Framed
$517GV White Finish
Frame $585
Cylinder
MV 3.5" Satin
Nickel - StandardMP 4" Black $70MQ 4" Satin Nickel
$70MR 4" White $70MS 4" Veneer $441
B7P Lithe Matte
Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical
Application only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
LW Unfinished -
StandardLX Finished
$203
3-7234EWKL2
G1 No Grommet -
StandardKP Grommet $65
3-2248RBRW and
3-7222CRR2
G1 No Grommet
G2 Right $65G3 Center -
StandardG4 Left $65G5 Right and Left
$130G6 Right and
Center $65G7 Left and
Center $65G8 Right, Left
and Center $130
3-7234EWKL2
and 3-2248RBRW
G1 No Grommet -
StandardLJ Black
LK Satin Nickel
NM Locking -
Standard Key
(#345)
H2X Locking - Key
Specific
NOTE: Lock Core
Order Form on
page K must be
included when
ordering H2X
option
HOW TO ORDER SPECIFY: Finish | edge | modesty (if applicable) | base (if applicable) | pull (if applicable) | back (if applicable) | grommet | grommet color key (if applicable). See page 879 for the designator finish
name.
MODEL NUMBER
3-7234EWKL2
Finish Edge
Modesty (3-7234EWKL2 only)
Base (3-7234EWKL2 only)
Pull (3-7222CRR2 only)
Back (3-7222CRR2 only) Grommet Grommet Color
Key (3-7222CRR2 only)
MGO FB FR MV B7P LW G1 G1 NM
913ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CONFIGURATIONS - WORKWALL RIGHT L UNIT
w d h list
Total Unit Dimensions 72 82 30 $ 4,252
CONSISTS OF:
model w d h wt cu ft list
3-7234EWKL2 72 34 30 163 14 $ 2,481
• Knife-Shaped Top
• Profiled on Curved End, Square Edge all other Edges
• One End Panel
• Cannot be Used as a Freestanding Unit
• Adjustable Levelers
• Optional Center Drawer (see page 934)
• Ships KD
model w d h wt cu ft list
3-2248RPRW RIGHT 22 48 30 159 24 $ 1,771
• Two File Drawers (Letter or Legal)
• Locking Pedestal
• Flat Connecting Edge on Left
• Adjustable Levelers
WORKWALL KNIFE TABLE
WORKWALL/COCKPIT RETURN
OPTIONS
Finish EdgeModesty (3-7234EWKL2 only)
Base (3-7234EWKL2 only)
Pull (3-2248RPRW only) Grommet
Grommet Color (3-7234EWKL2 only)
Key (3-2248RPRW only)
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife
(5% upcharge)
(User Side of
Worksurfaces)
3-2248RPRW $89
FB 2" Knife
(5% upcharge)
(User Side of
Worksurfaces)
3-7234EWKL2 $124
EF Square
H1Y 2" Flat Knife
(User Side of
Worksurfaces)
(3-7234EWKL2 only)
H1X 1" Flat Knife
(User Side of
Worksurfaces)
(3-2248RPRW only)
FR No Modesty -
StandardGR Wood Veneer
$152GS White Finish $414GT Silver-Framed
Frosted Acrylic Insert
$405
Silver Microlinear
Acrylic Insert
GU Wood Framed
$517GV White Finish
Frame $585
Cylinder
MV 3.5" Satin Nickel
- StandardMP 4" Black $70MQ 4" Satin Nickel
$70MR 4" White $70MS 4" Veneer $441
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical
Application only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
3-7234EWKL2
G1 No Grommet -
StandardKP Grommet $65
3-2248RPRW
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center
$65G7 Left and Center $65G8 Right, Left and
Center $130
G1 No Grommet -
StandardLJ Black
LK Satin Nickel
NM Locking -
Standard Key
(#345)
H2X Locking - Key
Specific
NOTE: Lock Core
Order Form on
page K must be
included when
ordering H2X
option
HOW TO ORDER SPECIFY: Finish | edge | modesty (if applicable) | base (if applicable) | pull (if applicable) | grommet | grommet color. (if applicable) | key (if applicable). See page 879 for the designator finish name.
MODEL NUMBER
3-7234EWKL2
Finish EdgeModesty (3-7234EWKL2 only)
Base (3-7234EWKL2 only)
Pull (3-2248RPRW only) Grommet
Grommet Color (3-7234EWKL2 only)
Key (3-2248RPRW only)
MGO FB FR MV B7P G1 G1 NM
914ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CONFIGURATIONS - COCKPIT RIGHT U
w d h list
Total Unit Dimensions 96 102 30 $ 6,762
CONSISTS OF:
model w d h wt cu ft list
3-7250LPDC2 LEFT 72 50 30 367 73 $ 2,980
• Straight Front Modesty Panel
• Two Box Drawers
• One File Drawer (Letter or Legal)
• Locking Pedestal
• 11"D Overhang
• Adjustable Levelers
model w d h wt cu ft list
3-4852RCU2 RIGHT 48 52 30 180 49 $ 2,011
• Grommet in Top
• 10"W Storage Shelf
• Adjustable Levelers
model w d h wt cu ft list
3-4822RPRC2 RIGHT 48 22 30 159 24 $ 1,771
• Two File Drawers (Letter or Legal)
• Locking Pedestal
• Adjustable Levelers
COCKPIT DESK
COCKPIT CORNER UNIT
COCKPIT RETURN
OPTIONS
Finish EdgePull (not available on 3-4852RCU2)
Desk Modesty Veneer (3-7250LPDC2 only)
Grommet (not available on 3-4852RCU2)
Grommet Color (3-4852RCU2 only)
Key (not available on 3-4852RCU2)
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife
(5% upcharge)
(User Side of
Worksurfaces)
3-4852RCU2 $1013-4822RPRC2 $89
FB 2" Knife
(5% upcharge)
(User Side of
Worksurfaces)
3-7250LPDC2 $149
EF Square
H1Y 2" Flat Knife
(User Side of
Worksurfaces)
(3-7250LPDC2 only)
H1X 1" Flat Knife
(User Side of
Worksurfaces)
(3-4852RCU2 and
3-4822RPRC2 only)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
GN Straight Grain -
StandardGP Half Diamond $274
3-7250LPDC2
G1 No Grommet -
StandardG2 Right $65G4 Left $65G5 Right and Left $130
3-4822RPRC2
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and Center
$130
LJ Black
LK Nickel
NM Locking - Standard
Key (#345)
H2X Locking - Key
Specific
NOTE: Lock Core Order
Form on page K must be
included when ordering
H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull (if applicable) | desk modesty veneer (if applicable) | grommet (if applicable) | grommet color (if applicable) | key (if applicable). See page 879 for the designator finish
name.
MODEL NUMBER
3-7250LPDC2
Finish EdgePull (not available on 3-4852RCU2)
Desk Modesty Veneer (37250LPDC2 only)
Grommet (not available on 3-4852RCU2)
Grommet Color (3-4852RCU2 only)
Key (not available on 3-4852RCU2)
MGO FB B7P GN G1 LJ NM
915ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CONFIGURATIONS - COCKPIT RIGHT L
w d h list
Total Unit Dimensions 72 98 30 $ 4,751
CONSISTS OF:
model w d h wt cu ft list
3-7250LPDC2 LEFT 72 50 30 367 73 $ 2,980
• Straight Front Modesty Panel
• Two Box Drawers
• One File Drawer (Letter or Legal)
• Locking Pedestal
• 11"D Overhang
• Adjustable Levelers
model w d h wt cu ft list
3-2248RPRW RIGHT 22 48 30 159 24 $ 1,771
• Two File Drawers (Letter or Legal)
• Locking Pedestal
• Flat Connecting Edge on Left
• Adjustable Levelers
COCKPIT DESK
WORKWALL/COCKPIT RETURN
OPTIONS
Finish Edge PullDesk Modesty Veneer (3-7250LPDC2 only) Grommet Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife
(5% upcharge)
(User Side of Worksurfaces)
3-2248RPRW $89
FB 2" Knife
(5% upcharge)
(User Side of Worksurfaces)
3-7250LPDC2 $149
EF Square
H1Y 2" Flat Knife
(User Side of Worksurfaces)
(3-7250LPDC2 only)
H1X 1" Flat Knife
(User Side of Worksurfaces)
(3-2248RPRW only)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
GN Straight Grain - StandardGP Half Diamond $274
3-7250LPDC2
G1 No Grommet - StandardG2 Right $65G4 Left $65G5 Right and Left $130
3-2248RPRW
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and Center $130
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | desk modesty veneer (if applicable) | grommet | key. See page 879 for the designator finish name.
MODEL NUMBER
3-7250LPDC2
Finish Edge PullDesk Modesty Veneer (3-7250LPDC2 only) Grommet Key
MGO FB B7P GN G1 NM
916ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
WORKWALL KNIFE TABLE STANDARD FEATURES
• Knife-Shaped Top
• Profiled on Curved End, Square Edge all other Edges
• One End Panel
• Cannot be Used as a Freestanding Unit
• Adjustable Levelers
• Optional Center Drawer (see page 934)
• Ships KD
• NOTE: Flat Connecting Edge Allows Workwall Knife Table to be Used: For L Unit, with Workwall/Cockpit Return (see page 919)
• Can Also Use a Modular Cabinet Top with Flat Ends as a Return Top (see pages 928-929) For U Unit, with Workwall Knife Table Bridge (see page 920) and Standard or Modular Credenza
• Can Also Use a Modular Return Top (see page 929) with One Flat End and One Shaped End as a Bridge Top; Flat End Connects to Workwall Knife Table and Shaped End to Credenza
• Cannot be Used with Standard Returns and Bridges
model w d h wt cu ft list
3-7234EWKL2 LEFT 72 34 30 163 14 $ 2,481
3-8434EWKL2 LEFT 84 34 30 186 17 $ 2,928
• End Panel on Right
3-7234EWKR2 RIGHT 72 34 30 163 14 $ 2,481
3-8434EWKR2 RIGHT 84 34 30 186 17 $ 2,928
• End Panel on Left
OPTIONS
Finish Edge Modesty Base Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FB 2" Knife (5% upcharge)
(User Side of Worksurfaces)
3-7234EWKL2 and
3-7234EWKR2 $1243-8434EWKL2 and
3-8434EWKR2 $146
EF Square
H1Y 2" Flat Knife
(User Side of Worksurfaces)
FR No Modesty - StandardGR Wood Veneer $152GS White Finish $414GT Silver-Framed Frosted
Acrylic Insert $405
Silver Microlinear Acrylic Insert
GU Wood Framed $517GV White Finish Frame $585
Cylinder
MV 3.5" Satin Nickel -
StandardMP 4" Black $70MQ 4" Satin Nickel $70MR 4" White $70MS 4" Veneer $441
G1 No Grommet - StandardKP Grommet $65
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | modesty | base | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-7234EWKL2
Finish Edge Modesty Base Grommet Grommet Color
MGO FB FR MV G1 G1
917ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
COCKPIT SINGLE PEDESTAL DESK STANDARD FEATURES
• Straight Front Modesty Panel
• Two Box Drawers
• One File Drawer (Letter or Legal)
• Locking Pedestal
• 11"D Overhang
• Flat Connecting Edge
• Adjustable Levelers
• NOTE: Flat Connecting Edge Allows Cockpit Desk to be Used: For U Unit, with Cockpit Corner Unit and Cockpit Return (see pages 921-922) For L Unit, with Workwall/Cockpit Return (see page 919)
• Can Also Use a Modular Cabinet Top with Flat Ends as a Return Top (see pages 927-928)
• Cannot be Used with Standard Returns and Bridges
RECTANGULAR TOP
model w d h wt cu ft list
3-7250LPDC2 LEFT 72 50 30 367 73 $ 2,980
3-7250RPDC2 RIGHT 72 50 30 367 73 $ 2,980
BOW SHAPED TOP
model w d h wt cu ft list
3-7250LPDCB2 LEFT 72 50 30 367 73 $ 3,079
3-7250RPDCB2 RIGHT 72 50 30 367 73 $ 3,079
• Bow Shaped Top
OPTIONS
Finish Edge Pull Desk Modesty Veneer Grommet Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FB 2" Knife (5% upcharge)
(User Side of Worksurfaces)
3-7250LPDCB2 and
3-7250RPDCB2 $1543-7250LPDC2 and
3-7250RPDC2 $149
EF Square
H1Y 2" Flat Knife
(User Side of Worksurfaces)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
GN Straight Grain - StandardGP Half Diamond $274
G1 No Grommet - StandardG2 Right $65G4 Left $65G5 Right and Left $130
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | desk modesty veneer | grommet | key. See page 879 for the designator finish name.
MODEL NUMBER
3-7250LPDCB2
Finish Edge Pull Desk Modesty Veneer Grommet Key
MGO FB B7P GN G1 NM
918ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
COCKPIT BULLET TABLE STANDARD FEATURES
• Bullet Shaped Top
• Profiled on Rim, 50"W Side has Square Edge
• Flat Connecting Edge
• One End Panel
• Cannot be Used as a Freestanding Unit
• Adjustable Levelers
• Optional Center Drawer (see page 934)
• NOTE: Flat Connecting Edge Allows Cockpit Bullet Desk to be Used: For U Unit, with Cockpit Corner Unit and Cockpit Return (see pages 921-922) For L Unit, with Workwall/Cockpit Return (see page 919)
• Can Also Use a Modular Cabinet Top with Flat Ends as a Return Top (see pages 927-928)
• Cannot be Used with Standard Returns and Bridges
• Ships KD
model w d h wt cu ft list
3-7250LBTF2 LEFT 72 50 30 206 21 $ 2,559
3-7250RBTF2 RIGHT 72 50 30 206 21 $ 2,559
OPTIONS
Finish Edge Modesty Base Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife $128(5% upcharge)
(User Side of Worksurfaces)
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
FR No Modesty - StandardGR Wood Veneer $152GS White Finish $414GT Silver-Framed Frosted
Acrylic Insert $405
Silver Microlinear Acrylic Insert
GU Wood Framed $517GV White Finish Frame $585
Cylinder
MV 3.5" Satin Nickel -
StandardMP 4" Black $70MQ 4" Satin Nickel $70MR 4" White $70MS 4" Veneer $441
G1 No Grommet - StandardKP Grommet $65
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | modesty | base | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-7250LBTF2
Finish Edge Modesty Base Grommet Grommet Color
MGO FA FR MV G1 G1
919ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
WORKWALL/COCKPIT RETURN STANDARD FEATURES
• Two File Drawers (Letter or Legal)
• Locking Pedestal
• Flat Connecting Edge
• Adjustable Levelers
• Use with Workwall Knife Table, Cockpit Desk and Cockpit Bullet Table
model w d h wt cu ft list
3-2242LPRW LEFT 22 42 30 148 21 $ 1,688
3-2248LPRW LEFT 22 48 30 159 24 $ 1,771
• Flat Connecting Right Edge
3-2242RPRW RIGHT 22 42 30 148 21 $ 1,688
3-2248RPRW RIGHT 22 48 30 159 24 $ 1,771
• Flat Connecting Left Edge
OPTIONS
Finish Edge Pull Grommet Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-2242LPRW and
3-2242RPRW $843-2248LPRW and
3-2248RPRW $89
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and Center $130
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | grommet | key. See page 879 for the designator finish name.
MODEL NUMBER
3-2242LPRW
Finish Edge Pull Grommet Key
MGO FA B7P G1 NM
920ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
WORKWALL KNIFE TABLE BRIDGE STANDARD FEATURES
• Adjustable Levelers • Use with Workwall Knife Table Only
model w d h wt cu ft list
3-2242LBRW LEFT 22 42 30 84 6 $ 561
3-2248LBRW LEFT 22 48 30 93 7 $ 613
• Reversed Shaped on Left
• Flat Connecting Right Edge
3-2242RBRW RIGHT 22 42 30 84 6 $ 561
3-2248RBRW RIGHT 22 48 30 93 7 $ 613
• Reversed Shaped on Right
• Flat Connecting Left Edge
OPTIONS
Finish Edge Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-2242LBRW and
3-2242RBRW $283-2248LBRW and
3-2248RBRW $31
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and Center $130
G1 No Grommet
LJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-f
Finish Edge Grommet Grommet Color
MGO FA G1 G1
921ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
COCKPIT CORNER UNIT STANDARD FEATURES
• Grommet in Top
• Flat Connecting and Approach Edges
• Grain runs Parallel to 48"W Side
• Profiled on User Side Only
• 10"W Storage Shelf
• Adjustable Levelers
• Use with Cockpit Desks or Cockpit Bullet Tables
model w d h wt cu ft list
3-4852LCU2 LEFT 48 52 30 180 49 $ 2,011
• Use with Right Pedestal Cockpit Desk or Cockpit Bullet Table and Left Cockpit Return or Modular Cabinet Top
3-4852RCU2 RIGHT 48 52 30 180 49 $ 2,011
• Use with Left Pedestal Cockpit Desk or Cockpit Bullet Table and Right Cockpit Return or Modular Cabinet Top
OPTIONS
Finish Edge Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife $101(5% upcharge)
(User Side of Worksurfaces)
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
LJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-4852LCU2
Finish Edge Grommet Color
MGO FA LJ
922ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
COCKPIT RETURN STANDARD FEATURES
• Two File Drawers (Letter or Legal)
• Locking Pedestal
• Flat Connecting Edge
• Adjustable Levelers
• Use with Cockpit Corner Units Only
model w d h wt cu ft list
3-4222LPRC2 LEFT 42 22 30 148 21 $ 1,688
3-4822LPRC2 LEFT 48 22 30 159 24 $ 1,771
3-4222RPRC2 RIGHT 42 22 30 148 21 $ 1,688
3-4822RPRC2 RIGHT 48 22 30 159 24 $ 1,771
OPTIONS
Finish Edge Pull Grommet Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-4222LPRC2 and
3-4222RPRC2 $843-4822LPRC2 and
3-4822RPRC2 $89
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
G1 No Grommet
G2 Right $65G3 Center - StandardG4 Left $65G5 Right and Left $130G6 Right and Center $65G7 Left and Center $65G8 Right, Left and Center $130
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | edge | pull | grommet | key. See page 879 for the designator finish name.
MODEL NUMBER
3-4222LPRC2
Finish Edge Pull Grommet Key
MGO FA B7P G1 NM
923ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
MODULAR DESK TOP STANDARD FEATURES
• Use as Desk Top • Profiled Approach and User Sides
model w d h wt cu ft list
3-6632MCT 66 32 1.19 91 5 $ 988
3-7232MCT 72 32 1.19 101 6 $ 1,072
3-7832MCT 78 32 1.19 114 6 $ 1,122
3-8432MCT 84 32 1.19 121 7 $ 1,205
OPTIONS
Finish Edge Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FB 2" Knife (5% upcharge)
(User Side of Worksurfaces)
3-6632MCT $493-7232MCT $543-7832MCT $563-8432MCT $60
EF Square
H1Y 2" Flat Knife
(User Side of Worksurfaces)
G1 No Grommet - StandardG2 Right $65G4 Left $65G5 Right and Left $130
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-6632MCT
Finish Edge Grommet Grommet Color
MGO FB G1 G1
924ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
END PANEL STANDARD FEATURES
• For 32"D worksurfaces • Must be Used with Back Panel • Adjustable Levelers
model w d h wt cu ft list
3-2925MEP 25.25 .75 28.81 20 3 $ 411
OPTIONS
Finish
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HOW TO ORDER SPECIFY: Finish. See page 879 for the designator finish name.
MODEL NUMBER
3-2925MEP
Finish
MGO
925ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
DESK SHELL STANDARD FEATURES
• Shell Only
• 5"H Recessed Modesty
• Adjustable Levelers
• Optional Pedestals (see page 926)
• Optional Center Drawer (see page 934)
model w d h wt cu ft list
3-7232SHEL 72 32 30 195 48 $ 2,017
OPTIONS
Finish Edge Desk Modesty Veneer Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FB 2" Knife $101(5% upcharge)
(User Side of Worksurfaces)
EF Square
H1Y 2" Flat Knife
(User Side of Worksurfaces)
GN Straight Grain - StandardGP Half Diamond $274
G1 No Grommet - StandardG2 Right $65G4 Left $65G5 Right and Left $130
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | desk modesty veneer | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-7232SHEL
Finish Edge Desk Modesty Veneer Grommet Grommet Color
MGO FA GN G1 G1
926ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
MODULAR PEDESTAL STANDARD FEATURES
• Use with 32"D Modular Desk
• Locking Pedestal
• Adjustable Levelers
• Cannot be Used as a Freestanding Unit
BOX/BOX/FILE
model w d h wt cu ft list
3-1625MBFC 15.63 25 28.81 100 11 $ 1,145
• Two Box Drawers
• One File Drawer (Letter or Legal)
FILE/FILE
model w d h wt cu ft list
3-1625MFFC 15.63 25 28.81 100 11 $ 1,145
• Two File Drawers (Letter or Legal)
OPTIONS
Finish Pull Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application
only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | pull | key. See page 879 for the designator finish name.
MODEL NUMBER
3-1625MBFC
Finish Pull Key
MGO B7P NM
927ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
MODULAR CABINET TOP STANDARD FEATURES
• Profiled User Side
• Flat Ends
• Long Grain Direction • NOTE: Woodgrain Laminate Tops Over 59.5" Long available in Long Grain Pattern Only
model w d h wt cu ft list
3-3022MCT2 30 22 1.19 30 2 $ 373
3-3622MCT2 36 22 1.19 36 2 $ 402
3-4222MCT2 42 22 1.19 40 2 $ 441
3-4822MCT2 48 22 1.19 48 3 $ 509
3-5422MCT2 54 22 1.19 51 3 $ 605
3-6022MCT2 60 22 1.19 54 4 $ 674
3-6622MCT2 66 22 1.19 66 4 $ 691
3-7222MCT2 72 22 1.19 72 4 $ 732
3-7822MCT2 78 22 1.19 77 4 $ 766
3-8422MCT2 84 22 1.19 82 4 $ 829
3-9022MCT2 90 22 1.19 87 5 $ 896
3-9622MCT2 96 22 1.19 93 5 $ 998
OPTIONS
Finish Edge Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-3022MCT2 $193-3622MCT2 $203-4222MCT2 $223-4822MCT2 $253-5422MCT2 $303-6022MCT2 $343-6622MCT2 $353-7222MCT2 $373-7822MCT2 $383-8422MCT2 $413-9022MCT2 $453-9622MCT2 $50
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
G1 No Grommet - StandardG2 Right $65G3 Center $65G4 Left $65G5 Right and Left $130G6 Right and Center $130G7 Left and Center $130G8 Right, Left and Center $195
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-3022MCT2
Finish Edge Grommet Grommet Color
MGO FA G1 G1
928ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
MODULAR CABINET TOP STANDARD FEATURES
• Profiled User Side
• Flat Ends
• Short Grain Direction • NOTE: Woodgrain Laminate Tops Over 59.5" Long available in Long Grain Pattern Only
model w d h wt cu ft list
3-2230MCT2 30 22 1.19 30 2 $ 373
3-2236MCT2 36 22 1.19 36 2 $ 402
3-2242MCT2 42 22 1.19 40 2 $ 441
3-2248MCT2 48 22 1.19 48 3 $ 509
3-2254MCT2 54 22 1.19 51 3 $ 605
3-2260MCT2 60 22 1.19 54 4 $ 674
3-2266MCT2 66 22 1.19 66 4 $ 691
3-2272MCT2 72 22 1.19 72 4 $ 732
3-2278MCT2 78 22 1.19 77 4 $ 766
3-2284MCT2 84 22 1.19 82 4 $ 829
3-2290MCT2 90 22 1.19 87 5 $ 896
3-2296MCT2 96 22 1.19 93 5 $ 998
OPTIONS
Finish Edge Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-2230MCT2 $193-2236MCT2 $203-2242MCT2 $223-2248MCT2 $253-2254MCT2 $303-2260MCT2 $343-2266MCT2 $353-2272MCT2 $373-2278MCT2 $383-2284MCT2 $413-2290MCT2 $453-2296MCT2 $50
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
G1 No Grommet - StandardG2 Right $65G3 Center $65G4 Left $65G5 Right and Left $130G6 Right and Center $130G7 Left and Center $130G8 Right, Left and Center $195
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-2230MCT2
Finish Edge Grommet Grommet Color
MGO FA G1 G1
929ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
MODULAR RETURN TOP STANDARD FEATURES
• Profiled User Side
• Veneer Grain Runs Front to Back
• For L Unit, with Standard Desks, Bullet Tables, P-Tables and Corner Units (see pages 906-907)
• For U Unit, with Workwall Knife Table as a Bridge Top; Flat End Connects to Workwall Knife Table and Shaped End to Standard Credenza or Modular
NOTES:
• Dimensions of Modular Return Tops Reflect Actual Worksurface Areas. For Actual Length of Unit, add 1" Due to the Reverse Shaped End.
• Woodgrain Laminate Tops over 59.5" Long available in Long Grain Pattern Only
model w d h wt cu ft list
3-2241MRTL2 LEFT 22 41 1.19 40 2 $ 441
3-2247MRTL2 LEFT 22 47 1.19 48 3 $ 509
3-2253MRTL2 LEFT 22 53 1.19 51 3 $ 605
3-2259MRTL2 LEFT 22 59 1.19 54 4 $ 674
3-2265MRTL2 LEFT 22 65 1.19 66 4 $ 691
3-2271MRTL2 LEFT 22 71 1.19 72 4 $ 732
• Reverse Shape Right Edge
• Flat Left Edge
NOTE:
• Reverse Shape Edge on Right, Flat on Left, Allows Modular Return Tops to be Used
3-2241MRTR2 RIGHT 22 41 1.19 40 2 $ 441
3-2247MRTR2 RIGHT 22 47 1.19 48 3 $ 509
3-2253MRTR2 RIGHT 22 53 1.19 51 3 $ 605
3-2259MRTR2 RIGHT 22 59 1.19 54 4 $ 674
3-2265MRTR2 RIGHT 22 65 1.19 66 4 $ 691
3-2271MRTR2 RIGHT 22 71 1.19 72 4 $ 732
• Reverse Shape Left Edge
• Flat Right Edge
NOTE:
• Reverse Shape Edge on Left, Flat on Right, Allows Modular Return Tops to be Used
OPTIONS
Finish Edge Grommet Grommet Color
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FA 1" Knife (5% upcharge)
(User Side of Worksurfaces)
3-2241MRTL2 and
3-2241MRTR2 $223-2247MRTL2 and
3-2247MRTR2 $253-2253MRTL2 and
3-2253MRTR2 $303-2259MRTL2 and
3-2259MRTR2 $343-2265MRTL2 and
3-2265MRTR2 $353-2271MRTL2 and
3-2271MRTR2 $37
EF Square
H1X 1" Flat Knife
(User Side of Worksurfaces)
G1 No Grommet- StandardG2 Right $65G3 Center $65G4 Left $65G5 Right and Left $130G6 Right and Center $130G7 Left and Center $130G8 Right, Left and Center $195
G1 No Grommet - StandardLJ Black
LK Satin Nickel
HOW TO ORDER SPECIFY: Finish | edge | grommet | grommet color. See page 879 for the designator finish name.
MODEL NUMBER
3-2241MRTL2
Finish Edge Grommet Grommet Color
MGO FA G1 G1
930ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
PANEL AND SUPPORT BASE STANDARD FEATURES
• Adjustable Levelers
MODULAR END PANEL
model w d h wt cu ft list
3-2921MEP 20.25 0.75 28.81 17 2 $ 345
• Use with 22"D Worksurfaces
• Must be Used with Back Panel or 3-2812SP Support Panel
SUPPORT BASE
model w d h wt cu ft list
3-1212SB 12 12 28.81 12 4 $ 474
• Supports 48"W or Longer Worksurfaces
• For Support when no Back Panel is Used
SUPPORT PANEL
model w d h wt cu ft list
3-2812SP 0.75 12 28.81 8 1 $ 279
• Supports Worksurfaces 22"D or 78"W or Longer
• Use at Worksurface Junctions when Using Full Back Panels
OPTIONS
Finish
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HOW TO ORDER SPECIFY: Finish. See page 879 for the designator finish name.
MODEL NUMBER
3-2921MEP
Finish
MGO
931ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
MODULAR CABINET BACK STANDARD FEATURES
• Unfinished Back • Adjustable Levelers
model w d h wt cu ft list
3-2930MCB 30 .75 28.81 15 3 $ 325
• Use as a 30"W Back Panel
3-2936MCB 36 .75 28.81 18 3 $ 343
• Use as a 36"W Back Panel
3-2942MCB 42 .75 28.81 21 3 $ 368
• Use as a 42"W Back Panel
3-2948MCB 48 .75 28.81 26 4 $ 427
• Use as a 48"W Back Panel
3-2954MCB 54 .75 28.81 27 5 $ 430
• Use as a 54"W Back Panel
3-2960MCB 60 .75 28.81 28 5 $ 432
• Use as a 60"W Back Panel
3-2966MCB 66 .75 28.81 32 5 $ 526
• Use as a 66"W Back Panel
3-2972MCB 72 .75 28.81 34 5 $ 600
• Use as a 72"W Back Panel
3-2978MCB 78 .75 28.81 38 5 $ 625
• Use as a 78"W Back Panel
3-2984MCB 84 .75 28.81 42 5 $ 647
• Use as an 84"W Back Panel
3-2990MCB 90 .75 28.81 44 6 $ 694
• Use as a 90"W Back Panel
3-2996MCB 96 .75 28.81 46 6 $ 736
• Use as a 96"W Back Panel
OPTIONS
Finish Back Wire Access Slot
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
LW Unfinished - Standard
LX Finished
3-2930MCB $333-2936MCB $343-2942MCB $373-2948MCB $433-2954MCB and
3-2960MCB $433-2966MCB $533-2972MCB $603-2978MCB $633-2984MCB $653-2990MCB $693-2996MCB $74
V7 No Wire Access Slot
V8 Wire Access Slot
1.25" H opening
Inset 6" from Either End
3-2930MCB $973-2936MCB $1153-2942MCB $1353-2948MCB $1553-2954MCB $1733-2960MCB $1933-2966MCB $2123-2972MCB $232 3-2978MCB $2513-2984MCB $2693-2990MCB $2903-2996MCB $309
HOW TO ORDER SPECIFY: Finish | back | wire access slot. See page 879 for the designator finish name.
MODEL NUMBER
3-2930MCB
Finish Back Wire Access Slot
MGO LW V7
932ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
MODULAR FILLER PANEL STANDARD FEATURES
MODULAR FILLER PANEL
model w d h wt cu ft list
3-2904MFP 0.75 4 28.81 4 1 $ 289
• Fills Overhang Gap Behind Pedestals
MODULAR CPU PEDESTAL
model w d h wt cu ft list
3-3020MCPU 30 19.25 28.81 145 15 $ 1,128
• Cannot be Used as a Freestanding Unit
LEFT SIDE:
• CPU Storage
• Open Back
RIGHT SIDE:
• One Adjustable Shelf
• Full Back
OPTIONS
Finish
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HOW TO ORDER SPECIFY: Finish. See page 879 for the designator finish name.
MODEL NUMBER
3-2904MFP
Finish
MGO
933ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
MODULAR PEDESTAL STANDARD FEATURES
• Cannot be Used as a Freestanding Unit • Adjustable Levelers
BOX/BOX/FILE
model w d h wt cu ft list
3-1620MBFC2 15.63 20 28.81 93 8 $ 1,082
• Two Box Drawers
• One File Drawer (Letter or Legal)
• Locking Pedestal
FILE/FILE
model w d h wt cu ft list
3-1620MFFC2 15.63 20 28.81 93 8 $ 1,082
• Two File Drawers (Letter or Legal)
• Locking Pedestal
LATERAL FILE
model w d h wt cu ft list
3-3020MFC2 30 20 28.81 130 13 $ 1,295
3-3620MFC2 36 20 28.81 143 16 $ 1,478
• Two Lateral File Drawers (Letter or Legal)
• Anti-Tilt Central Locking
MULTI FILE
model w d h wt cu ft list
3-3020MMFL2 LEFT 30 20 28.81 137 13 $ 1,447
• File Drawer on the Left, Box/Box Drawers on the Right
3-3020MMFR2 RIGHT 30 20 28.81 137 13 $ 1,447
• File Drawer on the Right, Box/Box Drawers on the Left
DOOR CABINET
model w d h wt cu ft list
3-3020MDC2 30 20 28.81 112 13 $ 1,143
3-3620MDC2 36 20 28.81 127 16 $ 1,420
• One Stationary Shelf
• One Adjustable Shelf
• Locking Doors
• Two Box Drawers
• One File Drawer (Letter or Legal)
• One Lateral File Drawer (Letter or Legal)
• Locking File and Lateral File Drawers
OPTIONS
Finish Pull Key
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
B7P Lithe Matte Silver
Oval
VA Black
VB Satin Nickel
Ice
VC Black
VD Satin Nickel
NOTE: Vertical Application only
Duet
VE Black
VF Satin Nickel
Forte
VG Black
VH Satin Nickel
Era
VJ Black
VK Satin Nickel
NM Locking - Standard Key
(#345)
H2X Locking - Key Specific
NOTE: Lock Core Order Form
on page K must be included
when ordering H2X option
HOW TO ORDER SPECIFY: Finish | pull | key. See page 879 for the designator finish name.
MODEL NUMBER
3-1620MBFC2
Finish Pull Key
MGO B7P NM
934ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
STANDARD FEATURES
CENTER DRAWER
model w d h wt cu ft list
OCD1 23 13 3 11 2 $ 382
• Use with Bullet Tables and Workwall Knife Tables
OCD 23 16.63 3 13 2 $ 382
• Use with Double and Single Pedestal Desks and P-Tables
• Center Drawer with Pencil Tray
• 25.25"W with Mounting Brackets
OPTIONS
Grain Pattern Finish
B4Z Quartered Veneer
QECDSTMNW
MGWMROOSL
PCOMGO
B5A Flat Cut Veneer
MMC MLCBUW
EBYMVW
MBMMHM
HOW TO ORDER SPECIFY: Grain pattern | finish. See page 879 for the designator finish name.
MODEL NUMBER
OCD1
Grain Pattern Finish
B4Z MGO
935ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CONFERENCE TOP STANDARD FEATURES
ROUND
model w d h wt cu ft list
3-36RT2 36 36 1.19 55 4 $ 1,197
• SeatsThreetoFour
3-42RT2 42 42 1.19 60 5 $ 1,309
• SeatsFour
3-48RT2 48 48 1.19 75 7 $ 1,546
• SeatsFourtoFive
• OneBaseRequired
• NOTE: AllRoundConferenceTopsRequireAdditionalWeightintheBasewhenUsingCylinderBasestoPreventtheTablefromTippingOver.OFSProvidesInstructionSheetsandClear6MLBagswithBase.CustomerMustProvideDrySandfortheAdditionalWeight.
OPTIONS
Finish Edge Power Cutout
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPLWoodGrainLaminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FB 2"Knife(5%upcharge)
(UserSideofWorksurfaces)
3-36RT2$603-42RT2$653-48RT2$773-7236RT2$1033-9642RT2$1253-12048RT2$1803-14448RT2$242
EF Square
H1Y 2"FlatKnife
(UserSideofWorksurfaces)
QR NoPowerCutout
NOTE:Optionsareforcutout
openingonly.Grommets
andPowerSuppliesmustbe
orderedseparately(seepage
1164).ToorderPowerCutout,
selectlocation(seepage1163).
HOW TO ORDER SPECIFY:Finish|edge|powercutout.Seepage879forthedesignatorfinishname.
MODEL NUMBER
3-36RT2
Finish Edge Power Cutout
MGO FB QR
936ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CONFERENCE TOP STANDARD FEATURES
RECTANGULAR
model w d h wt cu ft list
3-7236RT2 72 36 1.19 114 9 $ 2,052
• OnePieceTop
• TwoBasesRequired
• SeatsSix
3-9642RT2 96 42 1.19 157 13 $ 2,509
• OnePieceTop
• TwoBasesRequired
• SeatsEight
3-12048RT2 120 48 1.19 234 20 $ 3,595
• TwoPieceTop
• ThreeBasesRequired
• Seats10
3-14448RT2 144 48 1.19 294 24 $ 4,847
• TwoPieceTop
• ThreeBasesRequired
• Seats12
OPTIONS
Finish Edge Power Cutout
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPLWoodGrainLaminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FB 2"Knife(5%upcharge)
(UserSideofWorksurfaces)
3-36RT2$603-42RT2$653-48RT2$773-7236RT2$1033-9642RT2$1253-12048RT2$1803-14448RT2$242
EF Square
H1Y 2"FlatKnife
(UserSideofWorksurfaces)
QR NoPowerCutout
NOTE:Optionsareforcutout
openingonly.Grommets
andPowerSuppliesmustbe
orderedseparately(seepage
1164).ToorderPowerCutout,
selectlocation(seepage1163).
HOW TO ORDER SPECIFY:Finish|edge|powercutout.Seepage879forthedesignatorfinishname.
MODEL NUMBER
3-7236RT2
Finish Edge Power Cutout
MGO FB QR
937ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CONFERENCE TOP STANDARD FEATURES
BOAT SHAPE
model w d h wt cu ft list
3-9642BT2 96 42 1.19 154 13 $ 2,708
• OnePieceTop
• TwoBasesRequired
• SeatsEight
3-12048BT2 120 48 1.19 228 20 $ 4,279
• TwoPieceTop
• ThreeBasesRequired
• Seats10
3-14448BT2 144 48 1.19 278 24 $ 5,020
• TwoPieceTop
• ThreeBasesRequired
• Seats12
RACETRACK
model w d h wt cu ft list
3-7236AT2 72 36 1.19 105 9 $ 1,766
• OnePieceTop
• TwoBasesRequired
• SeatsSix
3-9642AT2 96 42 1.19 152 13 $ 2,634
• OnePieceTop
• TwoBasesRequired
• SeatsEight
3-12048AT2 120 48 1.19 224 20 $ 4,253
• TwoPieceTop
• ThreeBasesRequired
• Seats10
3-14448AT2 144 48 1.19 274 24 $ 4,994
• TwoPieceTop
• ThreeBasesRequired
• Seats12
OPTIONS
Finish Edge Power Cutout
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPLWoodGrainLaminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
FB 2"Knife(5%upcharge)
(UserSideofWorksurfaces)
3-9642BT2$1353-12048BT2$2143-14448BT2$2513-7236AT2$883-9642AT2$1323-12048AT2$2133-14448AT2$250
EF Square
H1Y 2"FlatKnife
(UserSideofWorksurfaces)
QR NoPowerCutout
NOTE:Optionsareforcutout
openingonly.Grommets
andPowerSuppliesmustbe
orderedseparately(seepage
1164).ToorderPowerCutout,
selectlocation(seepage1163).
HOW TO ORDER SPECIFY:Finish|edge|powercutout.Seepage879forthedesignatorfinishname.
MODEL NUMBER
3-9642BT2
Finish Edge Power Cutout
MGO FB QR
938ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
CYLINDER BASE STANDARD FEATURES
• AdjustableLevelers
• ArmClearance28.75"H
• NOTE:AllRoundConferenceTopsRequireAdditionalWeightintheBasewhenUsingCylinderBasestoPreventtheTablefromTippingOver.OFSProvidesInstructionSheetsandClear6MLBagswithBase.CustomerMustProvideDrySandfortheAdditionalWeight.
model w d h wt cu ft list
CB-18 18 18 28.75 38 10 $ 1,187
• SmallCylinderBase
• OverallHeight29.9375"H
• UseOneBasewith36"RoundTops
model w d h wt cu ft list
CB-20 20 20 28.75 80 15 $ 1,293
• BlackRevealatBottom
• 8"Wx8"DWireAccessDoor
• OverallHeightwithTop29.9375"H
• UseOneBasewith42"and48"RoundTops
• UseTwoBasesandOneCompatibleBasewith12'Tops
OPTIONS
Finish
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPLWoodGrainLaminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
HOW TO ORDER SPECIFY:Finish.Seepage879forthedesignatorfinishname.
MODEL NUMBER
CB-18
Finish
MGO
939ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
PANEL BASE STANDARD FEATURES
• Adjustable Levelers
model w d h wt cu ft list
PB-21 21 2.06 28.75 37 5 $ 389
• Use Two Bases with 6' Tops
PB-24 24 2.06 28.75 42 5 $ 389
• Use Two Bases with 8' Tops
• Use Three Bases with 10' and 12' Tops
PANEL BASE WITH ALUMINUM END CAPS
model w d h wt cu ft list
PBT-W24 24 5 28.75 42 5 $ 957
• Use Two Bases with 8' Tops
• Use Three Bases with 10' and 12' Tops
CONTEMPORARY PANEL BASE
model w d h wt cu ft list
PBW-21 21 2.13 28.75 22 4 $ 1,024
• Use Two Bases with 6' Tops
PBW-24 23.88 2.13 28.75 26 5 $ 1,024
• Use Two Bases with 8' Tops
• Use Three Bases with 10' and 12' Tops
• Overall Height with Top 29.9375"H
• Arm Clearance 28.75"H
• Overall Height with Top 29.9375"H
• Arm Clearance 1.1875" Top - 28.75"H 3.75" Top - 26.25"H
• Removable Access Panel for Wire Access
• Wire Pass-Thru from Top to Bottom
• Overall Height 29.9375"H
• Arm Clearance 28.75"H
OPTIONS
Finish
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HPL Wood Grain Laminate
QuarteredQEPNWP
MEPCOP
PCPSTP
Flat CutCMPCHP
BUPVMP
BEPHNP
HOW TO ORDER SPECIFY: Finish. See page 879 for the designator finish name.
MODEL NUMBER
PB-21
Finish
MGO
940ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
BASE STANDARD FEATURES
• Adjustable Levelers • Arm Clearance 28.75"H
V-BASE
model w d h wt cu ft list
VB-22 22.25 10.38 28.75 52 7 $ 1,385
• Curved Base
• Wire Pass-Thru from Top to Bottom
• Overall Height 29.9375"H
• Use Two Bases with 42" and 48" Round Tops
• Use Two Bases with 6' and 8' Tops
• Use Two Bases and One Compatible Base with 10' and 12' Tops
ELLIPSE
model w d h wt cu ft list
EB-24 24 6 28.75 50 5 $ 1,728
• Use with 8', 10' and 12' Tops
• Overall Height with Top 29.9375"H
• Use Two Bases with 8' Tops
• Use Three Bases with 10' and 12' Tops
OPTIONS
Finish
Veneer
QuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMC MLCBUW
EBYMVW
MBMMHM
HOW TO ORDER SPECIFY: Finish. See page 879 for the designator finish name.
MODEL NUMBER
VB-22
Finish
MGO
941ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
X BASE - STATIC STANDARD FEATURES
model w d h wt cu ft list
TSX32 32 32 27.75 17 11 $ 549
• Use One Base with 36" and 42" Round Tops
TSX38 38 38 27.75 23 15 $ 641
• Use One Base with 48" Round Tops
OPTIONS
Finish Glide/Caster
BWT Bone White
MSL Luster Grey
H1P Oiled Bronze
BKO Onyx
POLR Polar
H1F Warm Grey
A4F Glides - StandardA6C Black Dual Wheel Casters $77
HOW TO ORDER SPECIFY: Finish | glide/caster. See page 879 for the designator finish name.
MODEL NUMBER
TSX32
Finish Glide/Caster
BKO A4F
942ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
METAL BASE STANDARD FEATURES
• Adjustable Levelers • Arm Clearance 27.75"H
X BASE
model w d h wt cu ft list
MXB-32 32 32 27.75 32 4 $ 255
• Use One Base with 36" and 42" Round Tops
T BASE
model w d h wt cu ft list
MTB2 34 2 27.75 26 1 $ 245
• Use Two Bases with 6' and 8' Tops that are 36"-48"D
• Use Three Bases with 10' and 12' Tops that 36"-48"D
X4 BASE
model w d h wt cu ft list
MX4-30 30 30 27.75 53 4 $ 742
• Use One Base with 36" and 42" Round Tops
X4 BASE
model w d h wt cu ft list
MX4-38 38 38 27.75 58 4 $ 933
• Use One Base with 48" Round Top
OPTIONS
Finish
RC Black
RD Pewter
HOW TO ORDER SPECIFY: Finish. See page 879 for the designator finish name.
MODEL NUMBER
MXB-32
Finish
RC
943ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
METAL CIRCULAR BASE STANDARD FEATURES
• Adjustable Levelers • Arm Clearance 28.25"H • 4" Diameter Post
model w d h wt cu ft list
MCB-23 23 23 28.25 46 2 $ 754
• Use One Base with 36" and 42" Round Tops
• Use Two Bases with 6' and 8' Tops
MCB-28 28 28 28.25 88 4 $ 919
• Use One Base with 48" Round Tops
• Use Three Bases with 10' and 12' Tops
MCB-23
MCB-28
OPTIONS
Finish
BWT Bone White
MSL Luster Grey
H1P Oiled Bronze
BKO Onyx
POLR Polar
H1F Warm Grey
HOW TO ORDER SPECIFY: Finish. See page 879 for the designator finish name.
MODEL NUMBER
MCB-23
Finish
BKO
944ofs.com imagine a place® 800.521.5381 2018 Pricing
Vegas Casegoods
WORKSURFACE STRAIGHTENER STANDARD FEATURES
• Black Metal Finish NOTES:
• Used when Span of Unsupported Worksurface is Greater than 48"W
• One per 22"D Worksurface
• Two per 30" or 36"D Worksurface
model w d h wt cu ft list
SPTR48 47.5 1.6875 0.75 6 0.04 $ 40
• Use where Unsupported Worksurface Width is 48"-54"
SPTR54 54 1.6875 0.75 6 0.05 $ 45
• Use where Unsupported Worksurface Width is 55"-60"
SPTR60 60 1.6875 0.75 7 0.05 $ 54
• Use where Unsupported Worksurface Width is 61"-66"
SPTR66 66 1.6875 0.75 8 0.06 $ 57
• Use where Unsupported Worksurface Width is 67"-78"
HOW TO ORDER
MODEL NUMBER
SPTR48
1145ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesDrawer Assemblies
CENTER DRAWER STANDARD FEATURES
• Pencil Tray • 25.25"W with Bracket Tabs
model w d h wt cu ft list
OCD 23 16.63 3 13 2 $ 382
• Use with Double and Single Pedestal Desks
• Use with Modular Peninsula Tops if no Modesty Panel is Specified
model w d h wt cu ft list
OCD1 23 13 3 11 2 $ 382
• Use with Built Up Peninsula Tables with Modesty Panels and with Modular Peninsula Tops if an Optional Modesty Panel is Specified
model w d h wt cu ft list
PD-1 12.88 19.25 2.13 4 1 $ 125
• Pencil Drawer
• Black Molded Plastic
• Field Installed
• Flush Mount only
model w d h wt cu ft list
WK/S 21.75 11 3.75 8 1 $ 443
• Wood Keyboard Tray with Extendable Suspension
• Clearance Adjustable from 1.25" to 2.5" in Quarter Inch Increments
• 22.75"W with Slides
• Specify Finish
model w d h wt cu ft list
DA16-1 12.88 5.63 1.13 2 0.2 $ 34
DA19-1 15.88 5.63 1.13 2 0.3 $ 34
• Black Plastic Pencil Tray
• Cannot be used with Multi File Pedestal
OPTIONS
Grain Pattern (OCD, OCD1 and WK/S Only) Finish (OCD, OCD1 and WK/S Only)
B4Z Quartered Veneer
QECDSTMNW
MGWMROOSL
PCOMGO
B5A Flat Cut Veneer
MMCMLCBUW
EBYMVWMBM
MHM
HOW TO ORDER SPECIFY: Grain pattern | finish. See page H for the designator finish name.
MODEL NUMBER
OCD
Grain Pattern (OCD, OCD1 and WK/S Only) Finish (OCD, OCD1 and WK/S Only)
B4Z MGO
1146ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesKeyboard Assemblies
STANDARD FEATURES
model w d h wt cu ft list
KBA-1 8.3 17 2.7 9 1 $ 188
• Keyboard Assembly
• Lever Free, One Touch Spring Assist Adjustable Mechanism with 17" Track
• Height and Tilt Adjustment with an Integral Visual Gauge
• All Metal Finish Black Powder Coat with Molded Soft Touch Knob
• ANSI/HFES 100 and Bifma G1 Compliant
• Use with Wood Keyboard Platform WKT
model w d h wt cu ft list
WKT 21.75 11 1 5 0.6 $ 261
• Wood Keyboard Platform
• Use with KBA-1
• Specify Finish
model w d h wt cu ft list
KBA-2 9.5 17 7.4 8 1 $ 123
• Keyboard Assembly
• Lever Free, One Touch Spring Assist Adjustable Mechanism with 17" Track
• Height and Tilt Adjustment with an Integral Visual Gauge
• All Metal Finish Black Powder Coat with Molded Soft Touch Knob
• ANSI/HFES 100 and Bifma G1 Compliant
model w d h wt cu ft list
KBA-3 28.3 19 2.7 15 1 $ 309
• Keyboard Assembly
• Lever Free, One Touch Spring Assist Adjustable Mechanism with 17" Track
• Height and Tilt Adjustment with an Integral Visual Gauge
• All Metal Finish Black Powder Coat with Molded Soft Touch Knob
• Keyboard Tray with Gel-Free Foam Palm Rest and Swivel Mouse Surface
• Keyboard and Mouse Surface are RecycledHDPE
• ANSI/HFES 100 and Bifma G1 Compliant
model w d h wt cu ft list
SSW-1B BLACK 35.4 24 6.2-20 40 5 $ 625
SSW-1W WHITE 35.4 24 6.2-20 40 5 $ 625
• Sit/Stand Workstation
• 13.8" Height Adjustment
• 20 Degree Keyboard Tilt Range
• Space for Two Monitors
• 35 lbs. Total Weight Capacity
• Ships Fully Assembled
OPTIONS
Finish (WKT Only)
VeneerQuarteredQECDSTMNW
MGWMROOSL
PCOMGO
Flat CutMMCMLCBUW
EBYMVWMBM
MHM
HOW TO ORDER SPECIFY: Finish (if applicable). See page H for the designator finish name.
MODEL NUMBER
WKT
Finish (WKT Only)
MFC
1147ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesMonitor Arms and CPU Holder
STANDARD FEATURES
model w d h wt cu ft list
MA-1 n/a n/a n/a 10 1 $ 530
• Monitor Arm
• Angled Mini Arm
• Satin Chrome
• Acommodates 5-15 Lb. Monitors
• 250N Gas Cylinder
• Through Desk Mount; to pass Cables through Grommet Cutout, Cutout cannot be Smaller than 1.875". If Cables are run through another Access Point, a 0.375" Cutout is required for the Mount Bolt.
model w d h wt cu ft list
MA-1D n/a n/a n/a 10 1 $ 1,005
• Angled Mini Arm
• Satin Chrome
• Accommodates 5-15 lb. Monitors Each Arm
• 250N Gas Cylinder
• Through Desk Mount; to pass Cables through Grommet Cutout, Cutout cannot be Smaller than 1.875". If Cables are run through another Access Point, a 0.375" Cutout is required for the Mount Bolt.
SIT/STAND MONITOR-KEYBOARD ARMmodel w d h wt cu ft list
MKA-1SB STAIN BLACK 28 24 19.875 20 5 $ 821
MKA-1SS SILVER 28 24 19.875 20 5 $ 821
• Single Monitor Arm
• 18.5" Height Adjustment
• 28" x 18" Worksurface Platform
• Integrated Cable Management
• 6.3" Monitor Height Adjustment
• 180 Degree Independent Monitor Swivel
• Monitor Tilts, Rotates and Pans
• Grommet and Clamp Mount Provided
• 6.5-24.5 lbs. Total Weight Capacity
SIT/STAND MONITOR-KEYBOARD ARMmodel w d h wt cu ft list
MKA-1DB STAIN BLACK 28 24 19.875 25 5 $ 942
MKA-1DS SILVER 28 24 19.875 25 5 $ 942
• Dual Monitor Arm
• 18.5" Height Adjustment
• 28" x 18" Worksurface Platform
• Integrated Cable Management
• 6.3" Monitor Height Adjustment
• 180 Degree Independent Monitor Swivel
• Monitor Tilts, Rotates and Pans
• Grommet and Clamp Mount Provided
• 1.5-19.5 lbs. Total Weight Capacity
model w d h wt cu ft list
CPUH-1 8.3 17 18 10 1 $ 168
• CPU Holder
• Fixed or 360° Swivel
• 17" Glide Track
• Soft Touch Adjustment Knob
• Stores CPU Vertically below Worksurface
• Height Adjustable from 14.5" to 22.5"
• Width Adjustable from 3.5" to 9.3"
• All Metal Finish Black Powder Coat
HOW TO ORDER
MODEL NUMBER
MA-1
1148ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesTask Lights
STANDARD FEATURES
model w d h wt cu ft list
TL-1 Cannot be used with 30" or 36"W Wallmount Organizers
35.04 4.38 1.3 9 0.5 $ 284
TL-2 23.23 4.38 1.3 8 0.3 $ 284
• Energy Efficient T5 3500K Fluorescent Lamp
• Normal Power Factor (NPF) Electronic Ballast
• 9' Black Southwest Rotation Cord with 90˚ Plug
• Center Cord Exit
• On/Off Switch in Center of Fixture
• Prismatic Lens
• UV Stable Silver Reflector
• Screw Mounting
• UL, CUL, Listed
model w d h wt cu ft list
TL-6 Cannot be used with 60"W Units or Less
58.66 4.38 1.3 10 0.7 $ 481
• Energy Efficient T5 3500k Fluorescent Lamp
• Normal Power Factor (NPF) Electronic Ballast
• 9' Black Southwest Rotation Cord with 90˚ Plug
• Center Cord Exit
• On/Off Switch in Center of Fixture
• Prismatic Lens
• UV Stable Silver Reflector
• Screw Mounting
• UL, CUL, Listed
model w d h wt cu ft list
TL-9 6 Watt Warm White LED Lamp
17.52 1.75 1.13 4 0.1 $ 225
TL-10 14 Watt Warm White LED Lamp
34.45 1.75 1.13 6 0.2 $ 258
• Black LED Task Light
• On/Off Switch
• 10' Black Power Cord
• Screw Mounting
• UL, CUL, Listed
model w d h wt cu ft list
TL-14 24 2.94 1 4 0.2 $ 252
TL-15 36 2.94 1 6 0.3 $ 354
TL-16 48 2.94 1 8 0.4 $ 419
• Energy Efficient LED 5200K Bulbs
• Frosted Diffuser
• Silver Frame
• 10' Power Cord
• Aluminum Construction
• Screw Mounting
• UL Listed
model w d h wt cu ft list
TL-27 20 1.25 0.375 3 0.2 $ 158
TL-28 24 1.25 0.375 3 0.3 $ 170
TL-29 32 1.25 0.375 4 0.4 $ 215
TL-30 40 1.25 0.375 4 0.5 $ 243
• Energy Efficient LED 3000K Warm White Bulbs
• Black Solid Aluminum Alloy Base
• Touch and Hold Dimming
• 0-90° Light Angle Adjustment
• 10' Power Cord
• Screw Mounting
• UL Listed
model w d h wt cu ft list
TL-20 7.7 6 15 2 1 $ 551
• Energy Efficient LED 3500K Bulbs
• Silver Frame
• 6' Power Cord
• On/Off Touch Switch with Continuous Dimming
• Clamps to Rim of Worksurface - Cannot be used on Units with Back Panel
• UL Listed
HOW TO ORDER
MODEL NUMBER
TL-1
HOW TO ORDER
MODEL NUMBER
TL-1
1149ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPreview Light
STANDARD FEATURES
• UL Listed
model w d h wt cu ft list
TL-S26B 6 18 15 3 2 Single $ 371
TL-26B 6 18 15 4 2 Set of 2 $ 703
• Available in Five Colors
• Desk Top with Free Standing Base
• 18 Fractional Watt Leds at 3500 K Color Temperature
• Feather Touch; ADA-Compliant Power and Light Level Control Switch
• Touch and Hold Dimming
• Auto Shut Off After Nine Hours of Continuous Use
• 9' Power Cord
model w d h wt cu ft list
TL-S26C 2 18.13 17.5 3 2 Single $ 376
TL-26C 2 18.13 17.5 4 2 Set of 2 $ 713
• Available in Five Colors
• Clamps to Rim of Worksurface
• 18 Fractional Watt Leds at 3500 K Color Temperature
• Feather Touch; ADA-Compliant Power and Light Level Control Switch
• Touch and Hold Dimming
• Auto Shut Off After Nine Hours of Continuous Use
• 9' Power Cord
model w d h wt cu ft list
TL-S26F 10 22.63 40 - 50 8 5 $ 703
• Floor Unit with Free Standing Base
• Available in Five Colors
• Height Adjustment from 40" - 50" from floor
• 18 Fractional Watt Leds at 3500 K Color Temperature
• Feather Touch; ADA-Compliant Power and Light Level Control Switch
• Touch and Hold Dimming
• Auto Shut Off After Nine Hours of Continuous Use
• 9' Power Cord
OPTIONS
Finish
C8G Black
C8K Dark Slate
C8H Silver
C8J White
H4F Red
MODEL NUMBER
TL-S26B
Finish
C8G
1150ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Supplies
STANDARD FEATURES
• UL Listed
model w d h wt cu ft list
PSH-16PP SILVER POWDER COAT 5.25 4.25 1.88 3 0.25 $ 287
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• Two Electric Outlets
• 6' Hardwire Power Cord
model w d h wt cu ft list
PS-55 BLACK 5.44 3.38 2.13 1 0.5 $ 176
PS-55W WHITE 5.44 3.38 2.13 1 0.5 $ 176
• Mounts below Worksurface
• Mounting Bracket Included
• Two 12 Amp Power Outlets (Front)
• One Power Outlet (Back)
• Two 2.1 Amp USB Charging Ports
• 10' Power Cord
model w d h wt cu ft list
PS-60W 3.88 3.88 2 2 0.25 $ 305
• White Power Supply
• Mobile Table Top Unit
• Two 15 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• 6' Cord
• NOTE: Includes Interchangeable Green Top Cap
model w d h wt cu ft list
PS-61W 3.88 3.88 4.31 2 0.25 $ 321
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• White Power Supply
• Two 15 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• One Open Data Port
• 6’ Cord
• NOTE: Use with RJ-11 or RJ-45 Data Jacks
model w d h wt cu ft list
RJ-11 0.1 $ 36
• Black Voice Hard Wire Jack
RJ-45 0.1 $ 35
• Black Voice and Data Hard Wire Jack
• Black Only
HOW TO ORDER
MODEL NUMBER
PSH-16PP
1151ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Supplies
STANDARD FEATURES
model w d h wt cu ft list
PS-62W 5.5 3.25 6.5 3 0.25 $ 312
• White Power Supply
• Clamps to Rim of Worksurface
• Two 15 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• 6' Power Cord
model w d h wt cu ft list
PS-63W 8 4 6.88 4 0.25 $ 373
• White Power Supply
• Clamps to Rim of Worksurface
• Three 15 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• One Open Data Port
• 6' Long Cord
model w d h wt cu ft list
PS-64W 6.5 3 1.88 2 0.25 $ 285
• White Power Supply
• Mounts below Worksurface
• Two 15 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• 6' Long Cord
model w d h wt cu ft list
PS-65W 8 4 1.88 3 0.25 $ 349
• White Power Supply
• Mounts below Worksurface
• Three 15 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• One Open Data Port
• 6' Long Cord
POWER SUPPLY INSERTSmodel list
DGBV15F VGA Gender Charger $ 31
HDFF HDMI Gender Charger $ 44
TDG1026A-8C RJ45 Panel Mount Coupler $ 26
• Use with PS-63W and PS-65W
model w d h wt cu ft list
PS-66B BLACK 5.1 4.4 3.25 2 0.25 $ 181
PS-66S SILVER 5.1 4.4 3.25 2 0.25 $ 181
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• One 12 Amp Outlet
• One RJ-45 Data Jack
• Anodized Aluminum Finish
• 9' Cord
• UL Listed
model w d h wt cu ft list
PS-67B BLACK 5.1 4.4 3.25 2 0.25 $ 181
PS-67S SILVER 5.1 4.4 3.25 2 0.25 $ 181
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• Two 12 Amp Outlets
• Anodized Aluminum Finish
• 9' Cord
• UL Listed
model w d h wt cu ft list
PS-68B BLACK 5.1 4.4 3.25 2 0.25 $ 233
PS-68S SILVER 5.1 4.4 3.25 2 0.25 $ 233
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• One 12 Amp Outlet
• Two 2.1 Amp USB Charging Ports
• Anodized Aluminum Finish
• 9' Cord
• UL Listed
HOW TO ORDER
MODEL NUMBER
PS-62W
1152ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Supplies
POWER SUPPLY STANDARD FEATURES
• Requires Cutout to be Machined at a Factory - Contact your Customer Serivce Representative for Ordering Information
• UL Listed
model w d h wt cu ft list
PS-69B BLACK 6 4.4 3.25 3 0.25 $ 261
PS-69S SILVER 6 4.4 3.25 3 0.25 $ 261
• Two 12 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• 9' Power Cord
• Anodized Aluminum Finish
model w d h wt cu ft list
PS-70B BLACK 8.1 4.4 3.25 4 0.25 $ 319
PS-70S SILVER 8.1 4.4 3.25 4 0.25 $ 319
• Two 12 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• One RJ-45 Data Jack
• 9' Power Cord
• Anodized Aluminum Finish
model w d h wt cu ft list
PS-71B BLACK 8.13 8.21 2.75 7 0.5 $ 763
PS-71S SILVER 8.13 8.21 2.75 7 0.5 $ 763
SIDE 1:
• Two 12 Amp Outlets
• One 4.2 Amp USB Module with Two Ports
• One VGA Coupler
• 10' Power Cord
SIDE 2:
• Two 12 Amp Outlets
• One 4.2 Amp USB Module with Two Ports
• One HDMI Coupler
• 10' Power Cord
model w d h wt cu ft list
PS-72 3.5 3.5 10.14 2 0.25 $ 135
• Two 12 Amp Outlets
• Black Pop-Up Power Supply
• Two 2.1 Amp USB Charging Ports
• 10' Power Cord
model w d h wt cu ft list
PS-73 3.5 3.5 10.14 2 0.25 $ 89
• Two 12 Amp Outlets
• Black Pop-Up Power Supply
• One RJ-45 Data Jack
• 10' Power Cord
model w d h wt cu ft list
PS-74 BLACK 3.5 3.5 2.6 1 0.25 $ 114
• Two 15 Amp Outlets
• 10' Power Cord
model w d h wt cu ft list
PS-75 BLACK 3.5 3.5 2.6 1 0.25 $ 156
• One 15 Amp Outlet
• One 4.2 Amp USB Module with Two Ports
• 10' Power Cord
HOW TO ORDER
MODEL NUMBER
PS-69B
1153ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Supplies
POWER SUPPLY STANDARD FEATURES
• UL Listed
model w d h wt cu ft list
PS-77 BLACK 12.5 2.25 1.75 3 0.25 $ 152
• Mounts below Worksurface
• Six 12 Amp Outlets
• Overload Switch
• Surge Protection
• Aluminum Housing
• 10' Power Cord
model w d h wt cu ft list
PS-78 8.25 5.25 3.75 5 0.4 $ 504
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• Anodized Aluminum Finish
• Hinged Lid with Cord Management when Closed
• Pass Thru Wire Management Area
• Two 15 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• One Open Data Port
• 6' Power Cord
model w d h wt cu ft list
PS-79B BLACK 15.88 4.38 4.38 8 0.6 $ 1,258
PS-79S SILVER 15.88 4.38 4.38 8 0.6 $ 1,258
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• Anodized Aluminum Finish
• One Touch Open and Close
• Safety Photo Electronic Eye Prevents Rotation when Unit is being used
• Three 15 Amp Outlets
• One CAT6 Data Module
• One HDMI Port
• One 3.5mm Audio Module
• One Two Port USB Charging Port
• One VGA Port
• 12' Cord
model w d h wt cu ft list
PS-80B BLACK 11.75 4.38 4.38 6 0.4 $ 1,121
PS-80S SILVER 11.75 4.38 4.38 6 0.4 $ 1,121
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• Anodized Aluminum Finish
• One Touch Open and Close
• Safety Photo Electronic Eye Prevents Rotation when Unit is being used
• Two 15 Amp Outlets
• One HDMI Port
• One 2.1 Port USB Charging Port
• 12' Cord
HOW TO ORDER
MODEL NUMBER
PS-77
1154ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Supplies
STANDARD FEATURES
• UL Listed
model w d h wt cu ft list
PS-83WA WHITE 7.3125 2.75 4.125 4 0.25 $ 367
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• Brushed Aluminum Top Cap Finish
• Three Power Outlets
• One Duplex USB Charging Port
• 10' Power Cord
• NOTE: Includes Interchangeable White Top Cap
model w d h wt cu ft list
PS-87W White 8 3.25 3.75 4 0.5 $ 672
PS-87B Black 8 3.25 3.75 4 0.5 $ 672
• Mobile Table Top Unit
• One Power Outlet
• One USB Charging Port
• Bluetooth Speaker
• 10' Power Cord
model w d h wt cu ft list
PS-88W White 8 3 2.5 3 0.5 $ 672
PS-88B Black 8 3 2.5 3 0.5 $ 672
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• One Power Outlet
• One USB Charging Port
• Bluetooth Speaker
• 10' Power Cord
model w d h wt cu ft list
PS-89W White 4 4 3.25 3 0.5 $ 246
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• One Power Outlet
• Two USB Charging Port
• 6' Power Cord
HOW TO ORDER
MODEL NUMBER
PS-83WA
1155ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Supplies
POWER SUPPLY STANDARD FEATURES
model w d h wt cu ft list
PS-60W-BC 3.88 3.88 2 2 0.25 $ 388
• White Power Supply
• Mobile Table Top Unit
• Two 15 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• 6' Power Cord
• NOTE: Includes Interchangeable Green Top Cap
model w d h wt cu ft list
PS-61W-BC WHITE 3.88 3.88 4.31 2 0.25 $ 384
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• Two 15 Amp Outlets
• Two 2.1 Amp USB Charging Ports
• One Open Data Port
• 6' Braided Power Cord
• UL Listed
• NOTE: Use with RJ-11 or RJ-45 Data Jacks
model w d h wt cu ft list
PS-83WA-BC WHITE 7.3125 2.75 4.125 4 0.25 $ 528
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• Brushed Aluminum Top Cap Finish
• Three Power Outlets
• One Duplex USB Charging Port
• 10' Braided Power Cord
• UL Listed
• NOTE: Includes Interchangeable White Top Cap
model w d h wt cu ft list
PS-87W-BC WHITE 8 3.25 3.75 4 0.5 $ 884
PS-87B-BC BLACK 8 3.25 3.75 4 0.5 $ 884
• Mobile Table Top Unit
• One Power Outlet
• One USB Charging Port
• Bluetooth Speaker
• 10' Braided Power Cord
• UL Listed
model w d h wt cu ft list
PS-88W-BC White 8 3 2.5 3 0.5 $ 884
PS-88B-BC Black 8 3 2.5 3 0.5 $ 884
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• One Power Outlet
• One USB Charging Port
• Bluetooth Speaker
• 10' Braided Power Cord
• UL Listed
model w d h wt cu ft list
PS-89W-BC WHITE 4 4 3.25 3 0.5 $ 325
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• One Power Outlet
• Two USB Charging Port
• 6' Braided Power Cord
• UL Listed
OPTIONS
Cord
BC1 Dusk
BC4 Brass
BC5 Peacock
BC15 Zig Zag Fog/Storm
BC17 Zig Zag Berry/Poppy
BC18 Chevron Black/White
HOW TO ORDER SPECIFY: Cord
MODEL NUMBER
PS-60W-BC
Cord
BC1
1156ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Supplies
POWER SUPPLY STANDARD FEATURES
• UL Listed
model w d h wt cu ft list
PS-37 BLACK 15 9 4.75 12 2 $ 2,155
PS-38 SILVER 15 9 4.75 12 2 $ 2,169
• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information
• Six 12 Amp Power Outlets
• Two RJ-45 Cat6 Data Jacks
• One HDMI Port
• One VGA Port
• One Mini Stereo
• 10' Power Cord
model w d h wt cu ft list
PS-81B Black 15.5 9.5 6.75 8 1 $ 1,602
PS-81S Silver 15.5 9.5 6.75 8 1 $ 1,602
• Six 12 Amp Power Outlets
• Two 2 Port 4.2 Amp USB Charging Ports
• One HDMI Port
• One VGA Port
• RJ-11 Voice Jack
• RJ-45 Cat6 Data Jack
• 10' Power Cord
HOW TO ORDER
MODEL NUMBER
PS-37
1157ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Supplies
POWER SUPPLY STANDARD FEATURES
model w d h wt cu ft list
PS-12-X Black 10.75 6.5 3.5 8 1 $ 1,197
PS-12-N Satin Nickel 10.75 6.5 3.5 8 1 $ 1,948
• Standard Four 110 Volt Outlets
• Four Cat 5e Data Jacks (Two Modules)
• Four Blank insert Modules
• Dual Covers meet in Center, slide down out of the way
• Fits into 10.4375"W x 6.1875"D Slot
• 9' Cord
• Flush Mount
model w d h wt cu ft list
PSH-12-X Black 10.75 6.5 3.5 8 1 $ 1,353
PSH-12-N Satin Nickel 10.75 6.5 3.5 8 1 $ 2,334
• Standard Four 110 Volt Outlets
• Four Cat 5e Data Jacks (Two Modules)
• Four Blank insert Modules
• Dual Covers meet in Center, slide down out of the way
• Fits into 10.4375"W x 6.1875"D Slot
• 9' Hardwire Cord
• Flush MountPOWER SUPPLY INSERTS FOR PS-12
model list
145C5EU-BK Black Single Cat 5e Universal Module $ 45
U2KEY345-BK Black Dual Cat 3 RJ-45 Module $ 80
U2KEY311-BK Black Dual Cat 3 RJ-11 Module $ 80
U1KEY345-BK Black Single Cat 3 RJ-45 Module $ 47
U1KEY311-BK Black Single Cat 3 RJ-11 Module $ 47
2RCA-BK Black Dual RCA Audio Insert Module $ 80
1RCA-BK Black Single RCA Audio Insert Module $ 48
15PIN-BK Black Single 15 Pin Female to Female VGA Module $ 95
1TEL3MM-BK Black Single 3mm (.125") Audio Connector Module $ 48
2TEL3MM-BK Black Dual 3mm (.125") Audio Connector Module $ 80
BL-BK Black Blank Module $ 22
245C5EU-BK Black Dual Cat 5e Universal Module $ 75
U2KEY645-BK Black Dual Cat 6 Universal Module $ 137
1SVHS-BK Black Single Super VHS Module $ 105
2F-BK Black Dual F Connector (Coax) Module $ 70
1F-BK Black Single F Connector (Coax) Module $ 55
U1-USB/A-BK Single Keystone USB Type A, F/F (*Adapter only - does not include power source) $ 135
U1-USB/B-BK Single Keystone USB Type B, F/F (*Adapter only - does not include power source) $ 134
U2-USB/A-BK Dual Keystone USB Type A, F/F (*Adapter only - does not include power source) $ 258
U2-USB/B-BK Dual Keystone USB Type B, F/F (*Adapter only - does not include power source) $ 258
U2-USB/AB-BK Dual Keystone 1 each USB Type A and Type B (*Adapter only - does not include power source)
$ 258
HDMI-BK Black Single HDMI Female to Female Module $ 251
• Note: *These modules are only adapters and will require post installation connection by an installer or A/V professional to be fully functional.
HOW TO ORDER
MODEL NUMBER
PS-12-X
1158ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Supplies
POWER SUPPLY (VESTA) STANDARD FEATURES
model body finish w d h wt cu ft list
PS-90B BLACK 12 12 28.25 14 4 $ 1,200
PS-90F FOG 12 12 28.25 14 4 $ 1,200
PS-90S STORM 12 12 28.25 14 4 $ 1,200
PS-90W WHITE 12 12 28.25 14 4 $ 1,200
• UL Listed
OPTIONS
Power Accent Finish Cord
When PS-90B is specified:
H8P Black X9 No Cord (H7S only)H7U Standard Black Cord No Braid
BC8 Black Braid $56BC14 Pinstripe Black-White Braid $56
BC18 Chevron Black-White Braid $56
H8N Fog X9 No Cord (H7S only)H7U Standard Black Cord No Braid
BC8 Black Braid $56BC6 Fog Braid $56
H8Q Storm X9 No Cord (H7S only)H7U Standard Black Cord No Braid
BC8 Black Braid $56BC4 Brass Braid $56
BC18 Chevron Black-White Braid $56
When PS-90F is specified:
H8R Berry X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC4 Brass Braid $56BC6 Fog Braid $56
BC7 Berry Braid $56
H8P Black X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC6 Fog Braid $56BC14 Pinstripe Black-White Braid $56
BC15 Zig Zag Fog-Storm Braid $56BC18 Chevron Black-White Braid $56
H8X Honey X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC4 Brass Braid $56BC6 Fog Braid $56
BC2 Poppy Braid $56
H8W Peacock X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC6 Fog Braid $56BC5 Peacock Braid $56
BC18 Chevron Black-White Braid $56
H8U Poppy X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC6 Fog Braid $56BC10 Storm Braid $56
BC19 Chevron Poppy-Fog Braid $56
H8Q Storm X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC1 Dusk Braid $56BC10 Storm Braid $56
BC15 Zig Zag Fog-Storm Braid $56
H8V White X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC5 Peacock Braid $56BC14 Pinstripe Black-White Braid $56
BC19 Chevron Poppy-Fog Braid $56
When PS-90S is specified:
H8P Black X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC8 Black Braid $56BC10 Storm Braid $56
BC18 Chevron Black-White Braid $56
H8N Fog X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC6 Fog Braid $56BC10 Storm Braid $56
BC15 Zig Zag Fog-Storm Braid $56
When PS-90W is specified:
H8R Berry X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC7 Berry Braid $56BC4 Brass Braid $56
BC2 Poppy Braid $56
H8S Dusk X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC4 Brass Braid $56BC1 Dusk Braid $56
BC10 Storm Braid $56
H8N Fog X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC7 Berry Braid $56BC6 Fog Braid $56
BC15 Zig Zag Fog-Storm Braid $56
H8T Navy X9 No Cord (H7S only)BC4 Brass Braid $56
BC3 Navy Braid $56 BC2 Poppy Braid $56
H8Q Storm X9 No Cord (H7S only)H7T Standard White Cord No Braid
BC1 Dusk Braid $56BC10 Storm Braid $56
BC18 Chevron Black-White Braid $56
HOW TO ORDER SPECIFY: Power | accent finish | cord.
MODEL NUMBER
PS-90B
Power Accent Finish Cord
X9 H8P H7U
X9 No Lower Power Outlet - Standard
10' Cord
Top:
One 15 Amp Outlet
Two 2.1 Amp USB Charging Ports
One 18 WATT USB-C Charging Port
H7Q Two Lower Power Outlets $13 10' Cord
Top:
One 15 Amp Outlet
Two 2.1 Amp USB Charging Ports
One 18 WATT USB-C Charging Port
H7R Three Lower Power Outlets $38 10' Cord
Top:
One 15 Amp Outlet
Two 2.1 Amp USB Charging Ports
One 18 WATT USB-C Charging Port
H7S Battery Operated $1,021 Removable Charging Cord
Top:
Three 2.1 Amp USB Charging Ports
One 18 WATT USB-C Charging Port
Body Finish Shown in Shaded Area
Accent Finish Shown in Shaded Area
1159ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesGrommets and Wire Management
STANDARD FEATURES
model w dia h wt cu ft list
CGB-1 BLACK n/a 2.13 n/a n/a 0.1 $ 39
CGN-1 SATIN NICKEL n/a 2.13 n/a n/a 0.1 $ 39
CBB-1 ANTIQUE BRASS n/a 2.13 n/a n/a 0.1 $ 39
• Grommet
• Field Installable - For Cutout to be Machined at a Factory, Contact your Customer Serivce Representative for Ordering Information
• Inside Dimensions with Inserts .5625" Diameter
• Inside Dimensions without Inserts 1.8125" Diameter
model w d h wt cu ft list
RGB-1 BLACK 3.38 2 n/a n/a 0.1 $ 65
RGN-1 NICKEL 3.38 2 n/a n/a 0.1 $ 65
RGS-1 ANTIQUE BRASS 3.38 2 n/a n/a 0.1 $ 65
• Grommet
• Reuires Cutout to be Machined at a Factory, Contact your Customer Serivce Representative for Ordering Information
• Rectangular Grommet
• Inside Dimensions with Inserts 1.5" x .75"
• Inside Dimensions without Inserts 2.9375" x 1.5
model w d h wt cu ft list
WM-12 12 2.5 1.13 n/a 0.1 $ 41
WM-24 24 2.5 1.13 n/a 0.1 $ 52
WM-36 36 2.5 1.13 n/a 0.2 $ 62
WM-48 47.5 2.5 1.13 n/a 0.2 $ 69
WM-60 59.5 2.5 1.13 n/a 0.3 $ 75
WM-72 71.5 2.5 1.13 n/a 0.3 $ 84
model w d h wt cu ft list
WM-V4 4 1 n/a n/a 0.1 $ 34
• Velcro Wire Manager
• Set of Four
model h wt cu ft list
WM-HA6 48 1 0.1 $ 82
• Fabric Wire Manager Closed by Velcro
• Easily Cut to Different Lengths if Needed
• Can Access Wires Anywhere in the Length
• Use when Power Infeed is Routed Outside of Legs
model w d h wt cu ft list
WC-2 BLACK 4.5 4.5 1.375 0.1 0.5 $ 347
• Field Installed Wireless Charging Unit
• Must be Routed in from Bottom Side of Top 1/4" from Face
• 15 WATT Charging Speed
• Cover Cap is Exposed 5/8" Below Surface
• Location Decal Provided for Face of Top
• 5' Cord
OPTIONS
Finish (WM-HA6 Only)
BLK8 Black
GRY8 Grey
WHT8 White
HOW TO ORDER SPECIFY: Finish.
MODEL NUMBER
WM-HA6
Finish (WM-HA6 Only)
BLK8
1160ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPind
PEG BOARDS/PEGS STANDARD FEATURES
• Painted Birch Plywood • Hang Rails Included • 1" Dia. Peg Opening
PEG BOARD model w d h wt cu ft list
PND-3232PB 32 1.25 32 20 3 $ 589
PND-3636PB 36 1.25 36 20 4 $ 601
PEG BOARD model w d h wt cu ft list
PND-4832PB (shown) 48 1.25 32 29 4 $ 658
PND-6032PB 60 1.25 32 29 5 $ 773
• NOTE: Can be Hung Horizontal or Vertical
PEG BOARD
model w d h wt cu ft list
PND-7232PB (shown) 72 1.25 32 38 7 $ 888
PND-8432PB 84 1.25 32 42 8 $ 998
OPTIONS
Finish
BLK Black
IRN Iron
WHT White
Studio Paints (10% upcharge)
BLUS Blush
CIDR Cider
DIJO Dijon
FALO Fallow
FERN Fern
MDNT Midnight
PINE Pine
TUND Tundra
HOW TO ORDER SPECIFY: Finish.
MODEL NUMBER
PND-3232PB
Finish
BLK
1161ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPind
PEG BOARD SHELF KIT STANDARD FEATURES
• Solid White Oak • Two 1" Dia. Pegs
PEG BOARD SHELF KITmodel w d h wt cu ft list
PND-1405PBSK 14 5 0.75 4 0.25 $ 242
PND-1805PBSK (shown) 18 5 0.75 5 0.25 $ 258
• One Shelf
• Grooved on both sides (One Centered, One 1.375" from Edge)
PEGSmodel w d h wt cu ft list
PND-PBP 5 1 1 1 0.125 $ 71
• Lock in Place with a Twist
Top Side
Reverse Side
OPTIONS
Shelf Finish (not available on PND-PBP) Peg Finish
MMCQECMLCBUW DSTEBY MVW MNWMGWMBMMHM PCOMGOCLE Clear
BLK Black
IRN Iron
WHT White
Studio Paints (10% upcharge)
BLUS Blush
CIDR Cider
DIJO Dijon
FALO Fallow
FERN Fern
MDNT Midnight
PINE Pine
TUND Tundra
HOW TO ORDER SPECIFY: Shelf finish (if applicable) | peg finish. See page H for the designator finish name.
MODEL NUMBER
PND-1405PBSK
Shelf Finish (not available on PND-PBP) Peg Finish
MMC BLK
1162ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPlanter Box
STANDARD FEATURES
PLANTER BOXmodel w d h wt cu ft list
CC-W4834PB 48 14 34 99 17 $ 2,371
CC-W12034PB 120 14 34 226 41 $ 5,288
CC-W14434PB 144 14 34 271 48 $ 5,595
OPTIONS
Grain Pattern Finish
B4Z Quartered - Standard VeneerMMC
QEC
MLC
BUW
DST
EBY
MVW
MNW
MGW
MBM
MHM
MRO
OSL
PCO
MGO
Studio Veneer (10% upcharge)C2Q SVC C2P
B5A Flat Cut VeneerMMC MLC BUW EBY MVW MBM MHM
HOW TO ORDER
SPECIFY: Grain pattern | finish. See page H for the designator finish name.
MODEL NUMBER
CC-W4834PB
Grain Pattern Finish
B4Z BUW
1163ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Cutout Location
POWER CUTOUT LOCATIONS
To order, add location code(s) to model number.
Example: 4-48RT | LC2 | EW | QV
Model Number Finish Edge Power Cutout
NO CUTOUT
QR No cutout
POWER CUTOUTS BETWEEN BASES
QS Between 1st base and 2nd base QT Between 2nd base and 3rd base
POWER CUTOUTS OVER BASES
QV Over 1st base QW Over 2nd base QX Over 3rd base
QS
QS
QS QT
QV
QV
QV
QV QW
QW
QV QW
QV QX
QV QXQW
1164ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesPower Supplies / Bases
POWER SUPPLIES / CONFERENCE BASES
When centering a power supply over a base, please refer to the following:
Y = Can use standard base
M = Base must be a modification
X = Not Applicable - PS will not work over base
* Power supplies will not be concealed by base but may be located in center of base (in the V) ** PS-12, PSH-12, PS-78, PS-79B, PS-79S, PS-80B and PS-80S will fit over these bases if the Power Supply is rotated. The base and corresponding top will need to be modified.
DESCRIPTION MODEL NO.PS-12
PSH-12PSH-16PP PS-61W
PS-66BPS-66S
PS-67BPS-67S
PS-68BPS-68S
PS-69BPS-69S
PS-70BPS-70S PS-71
PS-72PS-73
PS-74PS-75 PS-78
PS-79BPS-79S
PS-80BPS-80S
PS-37PS-38PS-81BPS-81S
CGB-1RGB-1RGN-1RGS-1
Cylinder 4-20CB M Y Y Y Y Y M M M Y Y M M M M Y
Panel 4-21PB X X X X X X X X X X X X X X X X
Panel 4-21PBW X X X X X X X X X X X X X X X X
V-Base* 4-22VB X Y* Y* Y* Y* Y* M* M* X Y* Y* M* X X X Y*
Ellipse 4-24EB X X Y X X X X X X Y Y X X X X Y
Panel 4-24PB X X X X X X X X X X X X X X X X
Panel 4-24PBW X X X X X X X X X X X X X X X X
Cylinder 11-M20CB M Y Y Y Y Y M M M Y Y M M M M Y
Panel 11-M21PB X X X X X X X X X X X X X X X X
Panel 11-M21PBW X X X X X X X X X X X X X X X X
V-Base* 11-M22VB X Y* Y* Y* Y* Y* M* M* X Y* Y* M* X X X Y*
Ellipse 11-M24EB X X Y X X X X X X Y Y* X X X X Y*
Panel 11-M24PB X X X X X X X X X X X X X X X X
Panel 11-M24PBW X X X X X X X X X X X X X X X X
Queen Anne 23-WQB36 X X X X X X X X X X X X X X X X
Square 23-WSB16 M Y Y Y Y Y M M M Y Y M X M X Y
Square 23-WSB20 M Y Y Y Y Y M M M Y Y M M M M Y
Panel 23-M21PB X X X X X X X X X X X X X X X X
Panel 23-M24PB X X X X X X X X X X X X X X X X
Queen Anne 23-MQB36 X X X X X X X X X X X X X X X X
Square 23-MSB16 M Y Y Y Y Y M M M Y Y M X M X Y
Square 23-MSB20 M Y Y Y Y Y M M M Y Y M M M M Y
Cylinder CB-18 M Y Y Y Y Y M M M Y Y M X M X Y
Cylinder CB-20 M Y Y Y Y Y M M M Y Y M M M M Y
Ellipse EB-24 X X Y X X X X X X Y Y X X X X Y
Half Cylinder HC-18 X Y Y Y Y Y M M X Y Y M X X X Y
Half Cylinder HC-24 X** Y Y Y Y Y M M X** Y Y M X** X** X Y
Panel PB-21 X X X X X X X X X X X X X X X X
Panel PBW-21 X X X X X X X X X X X X X X X X
Panel PB-24 X X X X X X X X X X X X X X X X
Panel PBW-24 X X X X X X X X X X X X X X X X
Queen Anne QB-36 X X X X X X X X X X X X X X X X
Square SB-16 M Y Y Y Y Y M M M Y Y M X M X Y
Square SB-20 M Y Y Y Y Y M M M Y Y M M M M Y
V-Base* VB-22 X Y* Y* Y* Y* Y* M* M* X Y* Y* M* X X X Y
Panel PBT-M24 X X Y X X X X X X Y X X X X X Y
Panel PBT-W24 X X Y X X X X X X Y X X X X X Y
1165ofs.com imagine a place® 800.521.5381 2018 Pricing
AccessoriesFiling Configurations
FILING CONFIGURATIONS
OFS offers a multitude of filing options for storage flexibility. All filing configurations meet standard file tab clearance of 1.25" above the file
frame as recommended by our file frame suppliers.
Pedestals
Lateral Files
Lateral Files: Legal and Letter Front-to-Back
Pulse Quest - Veneer Vegas Cambria Cambria Quest - Laminate - Veneer - Laminate
4-7236SCL4-3656LF44-3622LF24-3621MFC
11-7222CLF11-3858LF411-3822LF211-7222CRLL211-7222CRRL211-6622CRLL211-6622CRRL211-M3658LF411-M3622LF211-M7222CRLL211-M7222CRRL211-M6622CRLL211-M6622CRRL2
3-7236SCL23-3656LF43-3622LF23-3620MFC2
23-W3620LFC23-W3654LFC23-W7220CRLL23-W7220CRRL
23-M3620LFC23-M3654LFC23-M7220CRLL23-M7220CRRL
LetterSide-to-Side
DesksCredenzasReturns
LetterFront-to-Back
DesksCredenzasReturns
LegalSide-to-Side
DesksCredenzasReturns
LetterDouble Front-to-Back
Letter Side-to-Side
LegalSide-to-Side
Legal and Letter Front-to-Back