New technology in combination with new materials and a focus on design gives Movex PR many new and important advantages:

- Unique ease of maneuverability.- High positional stability.- Hood designed for maximum capture

efficiency and extraction.

PR's design is based on Movex's basic principles: - External arm support.- Hose dimensions according to require-

ment: Ø 4, 5, 6 or 8 inches.- Hose quality according to application.- Supplied partially assembled for ease of

installation.

PR can be equipped with LED lighting and/or switch to control fan/damper. Movex PR is available in the lengths 5, 7, 10, 13, 16, 23, 30 and 36 feet.

The ideal extractor for industrial environments.

The Movex range also includes fans, accessories, automatic control gear and filters for local extraction

L O C A L E X T R A C T O R SPure advantage

Movex PR

Always choose low pressure dropLow pressure drop always saves energy. In addition, low pressure drop produces a lower sound level, reducing the risk of disruptive ventilation noise and can more easily be combined with other extractors in the same system.

External arm supports deliver numerous advantages

An externally positioned arm support has many advantages compared with extractors that have the supporting part internally in the extraction duct.

- Making the necessary adjustment to the friction joints is very simple.

- Option of selecting the correct hose dimension, Movex PR is available in the dimensions 4, 5, 6 and 8 inches.

- Light-weight construction with its own weight balanced by two gas springs

- In addition always has the lowest possible pressure drop.

The external link joints enable hose dimensions of 4, 5, 6 and 8 inches, and also make adjustment of the joints simple and relatively clean.

Compared with extractors with internal link systems, the PR arm has approx. 50% lower pressure drop.

Extractors with link joints internally in the suction duct have limitations and disadvantagesTheir size restricts the link joint's hose dimensions to 6” as the smallest possible selection, moreover, the location makes the necessary adjustment of the joints both difficult and often dirty.

There is up to double the pressure drop compared with Movex PR.

Internal arm support

Movex PR with external arm supports and joints delivers flexibility and advantages.

Ø 4

Ø 5

Ø 6

Ø 8

PR 11000PR 9000PR 7000PR 5000

PR 4000PR 3000PR 2000PR 1500

Ø 8

Ø 6

Ø 5

Ø 4

2”

4”

6”

2”

4”

6”

Stati

c pr

essu

re d

rop

(in/w

g)

Air flow (cfm)

PR RFWhite brackets in powder coated steel.Arm supports in anodized aluminum and joints in white PA & PP.White hood with anthracite grey handle in injection molded PP, stainless hood plate and screws. Attachments in contact with the evacuated air made from corrosion-resistant material. Hose of white PE-coated polyamide fabric.Used for evacuating corrosive gases.

PR WHITE White brackets in powder coated steel.Arm supports in anodized aluminum and joints in white PA & PP.White dome with anthracite grey handle, injection molded in PP with dome plate in anodized aluminum.Hose in white PVC.

PR STANDARDBrackets in powder coated steel. Arm supports in anodized aluminum and joints in anthracite grey PA & PP.Hood designed in accordance with EU standard. Injection molded in anthracite grey PP with hood plate in anodized aluminum.Hose of dark-blue PE-coated polyamide fabric.

A range of designs for different needs

The PR arm is also available in an ATEX version, see separate product sheet.

Air flow (cfm)

Optimally designed hoodThe hood is designed for maximum cap-ture efficiency.

It is ideal for capture of welding fumes and other hot contaminants. Capture efficiency for isothermal (non-hot) contaminants can be further improved by using the Coanda effect, which means that the air stream follows a level, solid surface, e.g. a table or a bench, rather than flowing freely through the room.

Flow & Pressure Drop DiagramThe black line indicates the pressure drop for the arm in the same position as in the sketch. Recommended transport velocity for welding fumes is 3543 ft/m. (See blue lines for each dimension.)

Stati

c pr

essu

re d

rop

(in/w

g)

300 500 700100 900 1100 1300300 500 700100 900 1100 1300

310

B

A

B

B

4 5/16

6 13

/16

758 7 1/164Ø 1/2 (4X)

Ø

Ø

Ø

PR 4000

PR 1500, 2000 & 3000

PR 5000

57

57

39

39

40

80

120

12 feet13 feet

15 feet17 feet

5 7/8

9 1/4

12 1/4

5 1/2

1/2 (3X)

1/2 (3X)

6 5 /1

6

6 5 /1

6

5 1/2

3 15/16

3 15/16

7 7/8

8 35 1/2 3 1/8

12 1/4

12 1/4

13

10 5 /8

8 3 1/8

7 7/8 A B Working radius*

Max. radius

(inch) (inch) (inch) (inch)

PR 1500 16 1/2 19 36* 60

PR 2000 37 1/2 19 57** 80

PR 3000 57 39 106*** 120

* At a mounting height of 6 feet, and a working height of 2 feet, 6 inches.** At a mounting height of 7 feet, and a working height of 2 feet, 6 inches.

Working radiusMax. radius

Working radiusMax. radius

Working radiusMax. radius

All models in Ø 4, 5, 6 & 8

***At a mounting height of 8 feet 3 inches, and a working height of 2 feet, 6 inches.

**At a mounting height of 7 feet, and a working height of 2 feet, 6 inches.

4 5/16

116 7 7/8

35 1/2

3 1/8

6 5/16

7 7/8 3 1/8

3 1/8

4

4

PR 7000

PR 9000

PR 11000

Ø

57

57

57

3939

39

Ø

Ø

59165

233 79

4

21 feet23 feet

27 feet29 feet

34 feet36 feet

12 1/412 1/4

12 1/4

Ø 1/2 (4X)

Ø 1/2 (6X)

Ø 1/2 (6X)

6 13

/16

5 7/8

5 5 /1

6

6 5/16

5 5 /1

6

13 3 /1

6

7 7/8

13 3 /1

6

7 7/8

7 7/8

9 1/4

Working radius*Max. radius

Working radius*

Max. radius

Working radius*

Max. radiusNon-working area

Non-working area

All models in Ø 4, 5, 6 & 8

*At a mounting height of 8 feet 3 inches, and a working height of 2 feet, 6 inches.

*At a mounting height of 8 feet 3 inches, and a working height of 2 feet, 6 inches.

*At a mounting height of 8 feet 3 inches, and a working height of 2 feet, 6 inches.

Ø

Ø

Ø

Ø

*

Ø

*

Ø

*

1/2 (x4)1/2 (x4)

1/2 (x4)

12 (x4)

5 9/165

6 1/2

5 7/8

7 1/16

8 1/8

15 9/1620 - 60

5/16

20 - 80

5 7/8

7 1/16

4 1/4 15 3/4

3 1/43 1/4

3 3/4

5/16

5 7/87 1/16

4 1/4

5 7/8

7 1/16

5/16

9 1/2

20 -

80

3 3/4

86

20 -

8086

20 -

8010

8

9 1/298

7’ 2”

7’ 2”

20 - 8020 - 80

PTS Length Ø Weight

Article (inch) (lb)

PTS 500-125 20” Ø5 15

PTS 1000-125 40” Ø5 18

PTS 1500-125 60” Ø5 21

PTS 500-160 20” Ø6 17

PTS 1000-160 40” Ø6 21

PTS 1500-160 60” Ø6 26

Ceiling bracket for extractor type Movex PR in lengths 5, 7 and 10 feet. Rotatable 360°, Ø5 and Ø6 inches.

Brackets for ceiling-, floor- and column mounting.Movex PR is supplied as standard including wall bracket. The following brackets are available for ceiling- and floor mounting.

Accessories

PTX Length Weight

Article (lb)

PTX 500 20” 11

PTX 1000 40” 17

PTX 1500 60” 22

PTX 2000 80” 28

PTX 2200* 86” 31

PTZ Length Weight

Article (lb)

PTZ 500 20” 17

PTZ 1000 40” 26

PTZ 1500 60” 37

PTZ 2000 80” 47

PTZ 2500* 108” 57

*Floor bracket

Ceiling- and floor bracket for extractor type Movex PR in lengths 16 and 23 feet. Rotatable 180°.

PTX 180 Length Weight

Article (lb)

PTX 180 500 20” 15

PTX 180 1000 40” 21

PTX 180 1500 60” 26

PTX 180 2000 80” 32

PTX 180 2200* 86” 34

*Floor bracket

*Floor bracket

PTX

Ceiling- and floor bracket for extractor type Movex PR in lengths 5, 7, 10 & 13 feet. Rotatable 180°.

Ceiling- and floor bracket for extractor type Movex PR in lengths 5, 7, 10 & 13 feet. Rotatable 360°.

PTX 180

PTZ PTS

12 feet

+-

13

10 5 /8

PR LED LED work lighting including cabling, transformer and push button.

A friction brake can be mounted on the longer arms 17, 23, 30 and 36 feet. The brake is mounted under the wall bracket's joint, giving the arm optimum manoeuvrability and ensuring that the arm stays in the position selected.The friction brake is included as standard in PR 9000 and PR 11000 and can be ordered as an accessory for PR 5000 and PR 7000.

Work lighting and fan control.Movex PR can be supplied with work lighting and a push button for fan and damper control.

With magnetic nozzle and quick connection adapted to the PR arm.

Output ...........................5 W at 350 mAIlluminance ................................ 2000 lxColour temperature ...................6500 K

Extension hose

Technical data - lighting

Accessories

Hose, PVC coated polyamide fabric with fully embedded spring steel coil,Temperature range ................... 14°F to 190°FPlastic components .................. PA, PA 30% Aluminum components ............ AnodizedSteel components ..................... Black oxidized, chromed or powder coated

Friction brake

Article Description Length (inch) Weight (lb)

PR 100-6340 Friction brake 8 0.6

PR TPush button for control of fan or damper.

PR LED/TLED work lighting including cabling and transformer with push button and an additional push button for control of fan/damper.

Article Description Ø Length (ft) Weight (lb)

PFS -125/4 Extension hose Ø5 13 9

PFS -125/8 Extension hose Ø5 26 12

PFS -160/4 Extension hose Ø6 13 9

PFS -160/8 Extension hose Ø6 26 12

20180315

Technical data hoseProperties ....................... Non-inflammable, suitable for welding fumes and flue gases. Temperature range ........4°F to +190° F.

Technical data other standardsPlastic components ......... PA, PA30%.Aluminium components ... Anodized.Steel components............. Black oxidized, chromed or powder

coated. Weight .............................. PR 1500: 20 lb PR 2000: 22 lb PR 3000: 26 lb PR 4000: 33 lb PR 5000: 51 lb PR 7000: 82 lb PR 9000: 115 lb PR 11000: 140 lb

Hose standardPVC coated polyamide fabric with fully embedded spring steel coil.

Hose in quality that cope with aggressive chemicals and other hoses with special requirements can be supplied on request, contact Movex.

Delivery configurationThe arms are supplied partially assembled, including wall bracket, for ease of installation.

The PR arm is also available in an ATEX version, see separate product sheet.

104 Commerce Drive, Suite CNorthampton, PA 18067, USA | Phone: 610 440-0478 | Fax: 610 440-0480 | www.movexinc.com | info@movexinc.com