LISTA CompACT · 2000 600 5 600 1000 300 1200 70.346.000 70.347.000 2200 500 5 500 1000 300 1200...
Transcript of LISTA CompACT · 2000 600 5 600 1000 300 1200 70.346.000 70.347.000 2200 500 5 500 1000 300 1200...
LISTA CompACT Workspace and storage furnishings
152
Shelving systems in classical unit widths of 1000 or 1300 mm are suitable for every inventory type
and for every kind of storage organisation. The simple slot-together assembly – from shelving units to fully
equipped storage facilities – ensures that a wide range of requirements are met and that even hard-to-reach inventory
is always accessible.
Shelving systems I shelving systems
153
Utmost stabilitythrough sturdy shelf supports with a load capacity of up to 2800 kg per shelving unit
High load capacities100 kg to 400 kg per shelf, 50 kg per drawer
Optimum use of spacecan also be installed as a double-stack set-up
Fast and easy assemblybecause of the non-screwed, slot-together design of all basic components
Benefits of LISTA shelving systemssee p. 146
www.lista.com © 2015154
Double-stack shelving systems in 1000 and 1300 unit widths make optimum use of the room height. This gives you twice as much storage capacity as with a single-stack layout.
The non-screwed, slot-together assembly of all the basic components enables simple and fast installation, even for a double-stack set-up. An extension unit is fitted to the lower shelf supports, extending them upwards. The dimensions of the shelving system are determined by the dimensions of the shelving units given.
We can carry out the planning and installation for you on request. Please contact us.
Shelf supports and horizontal bracesn sturdy side frames, shelf supports
and horizontal bracesn pair of shelf supports with a
load capacity of up to 2800 kgn six edge turns for maximum stability
Drawersn fully extendable drawers ideal for
storing small itemsn available for units with dimensions
1000 x 500 mm (W x D)
Shelves and partitionsn shelves with load capacities of
100 kg to 400 kgn available with rows of slots for
subdividing with partitions
Utmost stability and flexibility
Optimum use of space through double-stack set-up
Other equipment optionssuch as shelf front cover strips, drip trays, perforated rear panels, rear gratings, etc. can be found in the LISTA Compendium 2
Shelving systems I shelving systems
155© 2015 www.lista.com
!
2000 500 5 500 1000 300 1200 70.340.000 70.341.000
2000 600 5 600 1000 300 1200 70.346.000 70.347.000
2200 500 5 500 1000 300 1200 70.342.000 70.343.000
2200 600 5 600 1000 300 1200 70.348.000 70.349.000
2500 500 6 500 1000 300 1500 70.344.000 70.345.000
2500 600 6 600 1000 300 1500 70.350.000 70.351.000
1000 mm
Shelving systems 300, disassembled5 or 6 shelves in slot-together system. Easy to assemble and to equip with partitions and shelf dividers, rear panels, drawers and shelf front cover strips. Shelves, galvanised and slotted. Basic unit including 1 diagonal brace, 2 pairs of shelf supports and 4 horizontal braces, add-on unit including 1 pair of shelf supports and 2 horizontal braces. Specification: steel sheet, galvanised.
Note: from the third add-on unit, an additional diagonal brace is required (see p. 156).
Diagonal brace arrangement: the load capacities only apply when, for 6 shelf units or more, 2 shelf units or at least every fifth shelf unit is fitted with rear panels or 1 diagonal brace per 3 units.
Safety instructionsUnits with a depth to height ratio greater than 1:5 (1:4 for units with hinged doors and for single units with drawers) must be anchored. Floor anchoring see page 156.
Shelves Usable depth Usable width Shelf load
Unit load
Basic unit Art. no.
Add-on unit Art. no.
D
I Complete shelving systems, extendable
H
W
156 www.lista.com © 2015
!
!
!
!
! x 1000 x 500 1000 x 600 1000 x 800 1300 x 500 1300 x 600 1300 x 800
55.120.000 55.122.000 55.194.000 55.124.000 55.126.000 55.214.000
100 100 100 100 100 100
55.186.000 55.190.000 55.196.000 55.206.000 55.210.000 55.216.000
300 300 250 250 225 200
55.188.000 55.192.000 55.198.000 55.208.000 55.212.000 55.218.000
400 400 400 300 300 300
75 60 55.172.XXX - - - - -
100 83 55.173.XXX - - - - -
150 133 55.174.XXX - - - - -
918 x 459 (54 x 27 E)
2000 55.282.000
2200 55.284.000
2500 55.286.000
500 55.278.000
600 55.279.000
800 55.280.000
1000 1300
55.328.000 55.330.000
500 600 800
150 55.146.000 55.147.000 55.354.000
250* 55.340.000 55.344.000 55.348.000
300* 55.341.000 55.345.000 55.349.000
350* 55.342.000 55.346.000 55.350.000
400* 55.343.000 55.347.000 55.351.000
488 588 788
54 x 27 E
Shelving systems I individual shelving system parts
Pair of shelf supportsA pair of shelf supports consists of 2 shelf supports and 2 base plates (without horizontal braces). Slots 25 mm apart for attaching shelf supports at any height. The parts (supports, base plates) are supplied loose. Including screw fittings. Specification: Shelf supports 40 x 40 mm made from C profile cold-rolled, 6 edge turns for high stability, galvanised. Base plate, galvanised. Max. load capacity 2800 kg
Horizontal bracesCombined with 2 shelf supports each, the horizontal braces form the side frame. Specification: steel sheet, galvanised.
Diagonal braceUsed instead of rear panels to stabilise units lengthwise. Including screw fasteners. Specification: Steel, galvanised. Number of diagonal braces see planning notes p. 155.
Dividers for shelvesFor subdividing slotted shelves. Specification: steel sheet. Colour: pigeon grey, NCS S 4502-B.
Shelves, slottedWith rows of slots at the front and rear, distance between slots 25 mm. The shelves are folded 4 x 90° on the long sides and 2 x 90° on the short sides: For reasons of stability and to prevent injuries. Shelf height 38 mm. Including 2 shelf supports per shelf. Specification: steel sheet, galvanised.
Shelf dividersFor subdividing slotted shelves. The height of the shelf dividers, slotted in at the top and the bottom, depends on the distance between the shelves. Specification: steel sheet. Colour: pigeon grey, NCS S 4502-B. Top edge of shelf to top edge = height of the partitions.
In order to comply with regulations and for reasons of safety, shelving units must consist of at least the following elements
D
H
H
Pair of shelf supportsArt. no.
Horizontal brace
H
Shelving/ unit width mm
Diagonal braceArt. no. Art. no.
for all shelving system heights
D
Installed dimensions mm
PartitionsArt. no. Art. no. Art. no.
150
Shelf dividers
250*
300*
350*
400*
Dimensions (D) mm
* Height top edge to top edge
D
DrawersCan be installed in the shelving units at any time. Drawer load capacity 50 kg with an evenly distributed load. Including preassembled, fully extendable pull-outs and screw fittings. Specification: solid-walled steel construction. Colour: as per colour chart.
Caution: single units to be fitted with drawers must be anchored according to the assembly instructions.
Partition material 54 x 27 E and labelling system see p. 166
Shelf units mm
Shelves Art. no. Art. no. Art. no. Art. no. Art. no. Art. no.
slotted
Load capacity (kg)
slotted
Load capacity (kg)
slotted
Load capacity (kg)
DrawersFront height/usable height mm
Usable surface area (W x D) mm 918 x 459 (54 x 27 E)
W
W
157© 2015 www.lista.com
x 1000 x 500 1000 x 600 1000 x 800 1300 x 500 1300 x 600 1300 x 800
55.120.000 55.122.000 55.194.000 55.124.000 55.126.000 55.214.000
100 100 100 100 100 100
55.186.000 55.190.000 55.196.000 55.206.000 55.210.000 55.216.000
300 300 250 250 225 200
55.188.000 55.192.000 55.198.000 55.208.000 55.212.000 55.218.000
400 400 400 300 300 300
75 60 55.172.XXX - - - - -
100 83 55.173.XXX - - - - -
150 133 55.174.XXX - - - - -
918 x 459 (54 x 27 E)
!
55.226.000
55.175.000
55.176.000
55.177.000
50 x 80
500 600 800
150 55.146.000 55.147.000 55.354.000
250* 55.340.000 55.344.000 55.348.000
300* 55.341.000 55.345.000 55.349.000
350* 55.342.000 55.346.000 55.350.000
400* 55.343.000 55.347.000 55.351.000
488 588 788
Installed dimensions mm
PartitionsArt. no. Art. no. Art. no.
150
Shelf dividers
250*
300*
350*
400*
Dimensions (D) mm
* Height top edge to top edge
For colour information see fold-out page. When ordering, please use the desired three-digit colour code (instead of XXX).
Shelf units mm
Shelves Art. no. Art. no. Art. no. Art. no. Art. no. Art. no.
slotted
Load capacity (kg)
slotted
Load capacity (kg)
slotted
Load capacity (kg)
DrawersFront height/usable height mm
Usable surface area (W x D) mm 918 x 459 (54 x 27 E)
Levelling platesTo compensate for height. Enable units to be aligned with precision on uneven floors. Specification: PVC. Colour: grey.
Floor anchoringUnits with a depth to height ratio greater than 1:5 (1:4 for units with hinged doors) and single units with drawers must be anchored. Number of anchors: for single units: 2 per pair of shelf supports. For double units: 2 per pair of double shelf supports (only for outer shelf supports).
Floor anchor
M10 x 90, each
Levelling plates
Thickness 1 mm
Thickness 2 mm
Thickness 4 mm
Dimensions (W x D mm)
Shelf dividersPartitions can be inserted to fit exactly between the slotted shelves.
www.lista.com