LISHININTERNATIONALENTERPRISECORP. APPROVAL SHEET · 2005-11-11 · APPROVAL SHEET CUSTOMER ú ILLO...

LI SHIN INTERNATIONALENTERPRISE CORP.

APPROVAL SHEET

CUSTOMER ILLOMODEL NO 0226B24160

CUSTOMER NO

PART NO/SPEC

ISSUE DATA 20-SEP-2003

RESPONSIBILTY UNIT DC EXT.1860 R/D EXT.1818 SAFETY EXT.1814 QC EXT.1870 Mechanism Dept. Tel (02)8227-3301-8 EXT.151 Prepare By Lisa Feng

Approved By Design Engineer Safety unit

Customer Approved By

LI SHIN INTERNATIONAL ENTERPRISE CORP7,Lane 3,San Ho Rd, San-Shin Village Ta-Yuan Hsiang, Taoyuan Hsien, Taiwan,R.O.C. TEL (03)3831513 FAX (03)3835738

FORDGOOD ELECTRONIC LIMITEDNO.1 Kowloon Road,Song Ling Town,Wu Jiang City,Jiang Su,P.R ChinaTEL (512)63461928 FAX (512)63460989 Cable ”FORDGOOD”

11-1 ~ 1-5

22-1

33-1 ~ 3-3

44-1 ~ 4-6

55-1 ~ 5-11

66-1 ~ 6-3

77-1

CONTENTS

Electrical Specification

Circuit Diagram

Mechanical Drawing

PCB Layout Diagram

Bill Of Materials

Test Report

Safety License

Issued Date : Rev. 0.1

Model : 0226B24160

Description : 24V 6.67A 160W Output Adapter

Customer Part No. :

LSE Part No:

Customer Approval No.

Tel : ( 03 ) 38311513 ( Rep.) Fax : ( 03 ) 3835738 * Please return one copy to us after approved.

LI SHIN INTERNATIONAL ENTERPRISE CORP.

7 Lane 3, San Ho Rd, San-Shin Village, Ta-Yuan Hsing, Taoyuan Hsien, Taiwan, R.O.C.


ILLO

1.0 Description .This product is a AC to DC power transfer device, it has build in active power factor correction circuit and capable to deliver 160W dc output with constant voltage source.

2.0 Electrical .

2.1 Input Voltage ( AC ~ ).a. From 100-240 Vac Nominal.b. From 100-264 Vac Maximum.

2.2 Input Frequency.From 47-63Hz.

2.3 Input Current.a. 3.0A max at 90Vac.b. 1.5A max at 265 Vac.

2.4 Inrush Current.a. 100A max at cold-start and 25 , dc output full-loading and 115Vac input.b. 200A max at cold-start and 25 , dc output full-loading and 230Vac input.

2.5 Hold-Up time.5 msec minimum at dc output full loading and 110Vac 50/60Hz input.

2.6 Harmonic standard & PF .PSU shall comply with IEC 61000-3-2 Class D Harmonic standard & PF shall >= 0.9 at 240Vac, PF shall >= 0.95 at 100Vac for both 50/60Hz and dc output with full loaded.

2.7 Efficiency.83% minimum at dc output full loading and 115/230 Vac input voltage range.( this factor was not included cable voltage drop loss ).

2.8 Safety Test.a. Leakage current less then 0.5mA at 254Vac, 50/60Hz.b. Hi-pot test:1800 Vac, 10mA, 2 Sec between Primary to Secondary Ground.c. Insulation : 500Vdc, 2Sec between Primary to Secondary circuit, IR shall 20M .d. Grounding : AC 30A , 2Sec between input safety ground and SELV output GND, GR 0.1

2.9 Output Voltage and Current ( DC ).

Vout IoutRange Peak

0.1Model : 0226B24160 Page : 1 of 4 Revision

Document Title : 24V 160W AC to DC Adapter Specification.

24.00V 0-6.67A23.0-25.0V

2.10 Ripple and Noise.Low frequency ripple ( < 100KHz ) <= 350mVpp, and Total composite Ripple and NoiseLess than 350mVp-p, tested by dc loading side parallel with a 47uF/EC and 0.1uF/Ceramiccapacitors and Measured Band-Width with DC-20MHz.

2.11 Over-Shoot and under-shoot.Less than 10% of nominal Voltage value.

2.12 Protection.a. SCP : For short circuited protection and with auto-recovery function.b. OVP : Over-voltage protection, auto-recovery function, Vo range : 30Vdc max.c. OCP : 10A max at 115/230 Vac and with auto-recovery function.d. OTP : No damage with power unit or any safety issue occur.

2.13 LED Indication.Green light for Norminal operation. Blank for SCP & OCP mode.

2.14 Start Up.The output voltage shall rise from 0 volt and settle within regulation in less then 3sec,from apply of 110Vac and output full load condition.

2.15 Rise time.The output voltage shall rise from 0 volt and settle within regulation in less then 100msec,from apply of 110/230Vac and output full load condition.

2.16 Output Transient Response ( Dynamic load )

dc output I1( A ) I2 ( A ) dVmax (V) Tset-max24.0 0.00 3.33 +/- 1.5V 10 msec24.0 3.33 6.67 +/- 1.5V 10 msec

3.0 Environment .

3.1 Temperature.a. Operation : 0 to 40 for nominal input 100-240Vac condition.b. Storage : -25 to 70

3.2 Humidity.a. Operation : 5-90% for nominal input 100-240Vac condition.b. Storage : 5-95%.

3.3 Altitude.From sea level to 10,000 Ft ( operation ) and 40,000Ft ( Non operation ).

0.1

dI/dt>= 50mA / usec>= 50mA / usec

Model : 0226B24160 Page : 2 of 4 Revision


4.0 Safety & EMI requirement.

4.1 Safety.UL, C-UL

PSETUV/GS

CBCE

NordicCCC

AustraliaENEC

4.2 EMS.ESD Contact 8KVESD Air 15KVRS Fr: 26MHz-1.0GHz, Field Strength : 3V/M

EFT 2KV on AC power line.SURGE 1KV on differential mode.

CS 3V/M

RS Fr: 26MHz-1.0GHz, Field Strength : 3V/M

DIPS 0% 250Cy, 40% 5Cy, 70% 0.5Cycle

4.3 EMI for both Conduction & Radiation.

5.0 Reliability.

5.1 MTBF.50,000 Power On Hours at 25

5.2 Temperature Rise.Less then 45 at nominal 100-240Vac input / DC output full loading and environmenttemperature 25+/- 1 on Top of plastic case.

5.3 Burn-In.100% Burn-In with 80-100% loading & 30-40 Environment temperature.

0.1Model : 0226B24160 Page : 3 of 4 Revision

VCCI class BBSMI Meet

C-TICK MeetFCC Part 15, class B.

Refering Standards Spec / CertifiedCISPR EN55022 Pub 22, class B.

61000-4-561000-4-661000-4-3

61000-4-11

61000-4-261000-4-261000-4-361000-4-4

Test Item Test Specification. IEC standards

MEETMEET

MEETMEET

IEC 950/ EN 60951 MEETEMC/LVD MEET

J60950 MEETIEC 950/ EN 60950 MEET


Safety refering Standards File Records1950 MEET

5.4 Vibration Test.a. Non operation vibration with shipping container shall be 2G'S peak, 7-250Hz, 4G'S peak 50-500Hz, after 30 minute test no abnormally to be found.b. Operation vibration shall be 0.5G'S peak, 5-250Hz, 3 planes, after 30 minute test no abnormally to be noted.

5.5 Drop-TestTest height 70 cm, after drop test no function abnormally to be noted.

6.0 Mechanical.

6.1 Plastic Case with UL PC material, color Black.

6.2 Physical Size <= 180mm ( L ) X 85mm ( W ) X 42.50mm ( H ).

6.3 Output cable with UL1571, 14 AWG , 4 pin DIN plug type.

6.4 Weight about 850g.

0.1

Gary Shyi2003/2/12

Model : 0226B24160 Page : 4 of 4 Revision


Approve By Check By Prepared By

11-1 ~ 1-5

22-1

33-1 ~ 3-3

44-1 ~ 4-6

55-1 ~ 5-11

66-1 ~ 6-3

77-1

CONTENTS


Circuit Diagram

Mechanical Drawing

PCB Layout Diagram

Bill Of Materials

Test Report

Safety License

LI SHIN INTERNATIONAL ENTERPRISE CORPORATION DESCRIPTION: PART NO.: USED ON

0226B24160

DO NOT SCALE Material: SHEET 1 OF 1 3D FILE

THIRD ANGLE

PROJECTION UNITS: mm A3 SIZE DATE SEP-22-2003 Treatment: DWG NO. REV. REV. DESCRIPTION DATE APP

4321

4321

A

B

C

A

B

C

D

E

D

E

5 6 7 8

5 6 7 8

ELAINE

SAFETY

ME

SPEC. LABEL

LABEL SIZE:

144(L) x 51.5(W),

R3(3X), C3.3

** 表製造廠商

5.0mm Min

A.0

MODEL: 0226B24160

INPUT: 100-240V~,50-60Hz 2.5A

OUTPUT: 24V 6.0A

LI SHIN INTERNATIONAL ENTERPRISE CORP.AC ADAPTER

0226B24160AC100-240V,50-60Hz 2.5ADC24V ,6.0ASuzhou FordgoodElectronic Co., Ltd. / China

A/S (02)522-1665/1666

KETI HU09235-3001B

V+ V-

V-V+

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

For Indoor Use Only

LINES SHALL BE BLACK (PANTONE BLACK C), BASE TO BE SILVER (PANTONE 877C).

8. LETTERING SHOULD BE CLEAR-CUT, SURFACE TO BE FREE OF DEFECT.

3. THE LINES ARE 0.5 mm WIDE.

THE CSA LIST (CM, CM-1,...).

GRAND TOTAL THK. 0.142 10%

4 K.K. #9 ADHESIVE 0.024 3 POLYESTER(#75) 0.075 2 ACRYLIC ADHESIVE 0.018 1 OPP FILM(MAT) 0.025

MATERIAL THICKNESS AS FOLLOWS:2. THE ARRANGEMENT OF LAMINATE WITH TOLERANCES TO BE 0.25 mm.

7. SAFETY STANDARD ORGANIZATION IN

CATION MARK AS SPECIFIED IN WITH THE CSA VENDOR IDENTIFI-6. THE LABEL SHALL BE MARKED

RECOGNIZED AND CSA CERTIFIED.5. APPROVED VENDOR MUST BE UL

1. ALL DIMENSIONS ARE IN mm.

NOTES: UNLESS OTHERWISE SPECIFIED.

SYMBOLS ARE 7.62MM TO 5.0MM HIGH.

4. COLOR: CHARACTERS, LOGOS AND

0226B24160-SPLB-03

11-1 ~ 1-5

22-1

33-1 ~ 3-3

44-1 ~ 4-6

55-1 ~ 5-11

66-1 ~ 6-3

77-1

CONTENTS


Circuit Diagram

Mechanical Drawing

PCB Layout Diagram

Bill Of Materials

Test Report

Safety License

11-1 ~ 1-5

22-1

33-1 ~ 3-3

44-1 ~ 4-6

55-1 ~ 5-11

66-1~ 6-3

77-1

CONTENTS


Circuit Diagram

Mechanical Drawing

PCB Layout Diagram

Bill Of Materials

Test Report

Safety License

Li Shin International Enterprise Corp.R/D Bill Material Model : 0226B24160 Issued Date : 2003/9/19 Rev: 0.1

Item Location Description & Specification Q,ty Manufacturer Vendor Type P/N1 C5 Chip capacitor SMD 1 TDK S2331-105K-30

105/16V X7R 0805 Murata

Walsin

Phycomp

2 C19 Chip capacitor SMD 1 TDK S2331-474K-30

474/16V X7R 0805 Murata

Walsin

Phycomp

3 C6 Chip capacitor SMD 1 Walsin S2331-103K-00

103/50V 0805 X7R Murata

Phycomp

Pan Overseas

TDK

4 C13,20 Chip capacitor SMD 2 Walsin S2331-222K-10

222/200V 0805 X7R Murata

Phycomp

Pan Overseas

TDK

5 C12,18,22,21, Chip capacitor SMD 6 Walsin S2331-104K-00

C30,32 104/50V 0805 X7R Murata

Phycomp

Pan Overseas

TDK

6 IC1 PFC Controller 1 ST L6561 S0001-0008-01

IC SO-8 SMD

7 R1,2,8,10,46, Chip resistor SMD 6 RALEC S1041-1004-00

R48 1M 1206 5% TA-I

YAGEO

TY-OHM

8 R3 Chip resistor SMD 1 RALEC S1141-1072-00

10.7K 1206 1% TA-I

YAGEO

TY-OHM

9 R4,5,15,16,17 Chip resistor SMD 6 RALEC S1141-4993-00

R18 499K 1206 1% TA-I

SMDILLO 24V 6.67A 160W Adapter

Li Shin International Enterprise Corp.YAGEO

TY-OHM


8.2K, 1206, 5% TA-I

YAGEO

TY-OHM

11 J11,J12,R6,35 Chip resistor SMD 6 RALEC S1041-0000-00

R27,28 0 1206 5% TA-I

YAGEO

TY-OHM


22K 1206 5% TA-I

YAGEO

TY-OHM

13 R12,24,25 Chip resistor SMD 3 RALEC S1041-0220-00

22 1206 5% TA-I

YAGEO

TY-OHM


68K 1206 5% TA-I

YAGEO

TY-OHM


150K 1206 5% TA-I

YAGEO

TY-OHM


10 1206 5% TA-I

YAGEO

TY-OHM

17 R37,40 Chip resistor SMD 2 RALEC S1041-5101-00

5.1K 1206 5% TA-I

YAGEO

TY-OHM


15.0K 0805 1% TA-I

YAGEO

TY-OHM

Li Shin International Enterprise Corp.19 R47 Chip resistor SMD 1 RALEC S1031-6803-00

680K 0805 5% TA-I

YAGEO

TY-OHM


2.49K 1206 1% TA-I

YAGEO

TY-OHM


2.7K 0805 5% TA-I

YAGEO

TY-OHM


220 1206 5% TA-I

YAGEO

TY-OHM


1K 1206 5% TA-I

YAGEO

TY-OHM


240K 0805 5% TA-I

YAGEO

TY-OHM


8.66K 0805 1% TA-I

YAGEO

TY-OHM


1K 0805 1% TA-I

YAGEO

TY-OHM


3.3K 1206 5% TA-I

YAGEO

TY-OHM


1K 1206 5% TA-I

YAGEO

Li Shin International Enterprise Corp.TY-OHM

29 R42 Chip resistor SMD 1 RALEC S1131-2612-0026.1K 0805 1% TA-I

YAGEO

TY-OHM

30 J12 Chip resistor SMD 1 RALEC S1041-0000-000 1206 5% TA-I

YAGEO

TY-OHM

31 Q1 Bi-polar TransistorSMD 1 Philips PMBT2907A S0101-0018-01

-60V -600mA PNP SOT-23 ROHM 2907

Fairchild KST2907 S0101-0016-01

ON P2T2907AT1 S0111-0001-0A

32 Q2,4,6 J-FET Transistor SMD 3 Philips 2N7002 S0101-0019-01

60V 300mA N-channel SOT-23 Infineon SN7002

Fairchild 2N7002MTF S0101-0019-05

33 D6 SMD 75V 300mA 1 VISHAY LL4148 S0211-0013-01

ROHM RLS4148N S0211-0013-02

34 Z2 Zener diode SMD SOD-80C 1 Philips BZV55C16 S0231-0014-31Z.D 1/2W 16V VISHAY TZMC16 S0231-0014-1N

ROHM RLZ16B S0231-0031-11

35 J10 Zener diode SMD SOD-80C 1 Philips BZV55C3V9 S0231-0033-11

Z.D 1/2W 3.7~4.1V TEMIC TZMC03V9 S0231-0060-1I

ROHM RLZ3.9

36 Z3 Zener diode SMD SOD-80C 1 Philips BZV55C27 S0231-0042-11

Z.D 1/2W, 27V 5% TEMIC TZMC27 S0231-0042-1I

ROHM RLZ27


Z.D 1/2W 18.8~21.2V TEMIC TZMC20 S0231-0016-3I

ROHM RLZ20


Z.D 1/2W 22V TEMIC TZMC22

ROHM RLZ22

39 IC3 PWM IC 1 SG SG6841S S0011-0012-0L

SG6841S SMD

Li Shin International Enterprise Corp.

Item Location Description & Specification Q,ty Manufacturer Vendor Type40 BC2,3,4 Bead core for D3,D10,C11 pin 3 Kingcore K5B S5052-0006-00

RH 3.5×3×1.6mm CHILSIN S5052-0013-00

HORNG YIH

41 BD1 Bridge rectifier 1 Shindengen U8KBA80R S0242-0020-06

8A/800V Pitch=5mm Shindengen D8KBA80R

42 BS1 Plastic for LED1 1 S6210-0015-00

4 × 17mm Kang Yang

43 C1 AC Across line capactior 1 ISKRA KNB1560 S2022-3342-07

334/275V X2 PITCH=15mm ±10% OKAYA LE S2022-3342-01

PILKOR PCX2 337 S2022-3342-02

Matsushita ECQUL S2022-3342-03

44 C10,15 Filter E-capacitor 5x12(MAX) 2 NICHICON PW/HE S2442-1005-18

10uF/50V 105 Low ESR Panasonic HFA S2442-1005-12

NCC KY/LXZ S2442-1005-17/19

Rubycon YXG S2442-1005-14

45 C4 Filter E-capacitor 6.3x12(MAX) 1 NICHICON PW S2442-4705-28

47uF/50V 105 Low ESR Rubycon YXG S2442-4705-22

Panasonic HFA S2442-4705-23

NCC LXZ/KY S2442-4705-21/25

46 C7 Filter E-capacitor 1 NICHICON GN S2422-151B-88

150uF/450V 105 22x40mm(MAX) Rubycon MXG S2422-151B-85

47 C9 Ceramic capacitor 1 Pan Overseas EM8472ZP16 S2202-472Z-2A

472/1KV CER Pitch=7.5mm +80/-20% JYA-NAY S2202-472Z-28

UNIVERSE S2202-472Z-25

TDK

48 C29 Ceramic capacitor 1 Pan Overseas

103/1KV CER Pitch=7.5mm +80/-20% JYA-NAY S2202-103Z-2F

UNIVERSE

TDK CK45-E3AD103ZYAN S2202-103Z-28

49 C11 AC by-pass capacitor 1 TDK CD S2032-2221-13

222/250V Y1 Pitch=10mm ±20% Murata KX S2032-2221-11

Matsushita NS-A S2032-2221-12

BC DP S2032-2221-14

50 C33 AC-by-pass capacitor 1 TDK CD S2032-1021-11

102/250V Y1 Pitch=10mm ±20% Murata KX S2032-1021-12

Li Shin International Enterprise Corp.Matsushita NS-A S2032-1021-15

BC DP S2032-1021-13

51 C34 Ceramic capacitor 1 Pan Overseas S2202-101K-22

101/1KV CER Pitch=5mm X7R OR NPO JYA-NAY S2202-101K-23

UNIVERSE S2202-101K-21

52 C16 Filter E-capacitor 1 NICHICON PW/HE S2442-4714-48

470uF/35V 105 10×20mm(MAX) Panasonic ECA1EFA471 S2442-4714-46

Low ESR NCC KY/LXZ S2442-4714-47/41

Rubycon YXG S2442-4714-43

53 C17 Filter E-capacitor 1 NICHICON PW S2442-2214-38

220uF/35V 105 8×16mm(MAX) Rubycon YXG S2442-2214-33

Low ESR NCC LXZ S2442-2214-32

54 C2 Filter E-capacitor 1 NITSUKO 2W105MDST S2122-1058-1C

1uF/450V ±10% P=15mm NISSEI MMX S2122-1058-1D

55 C3 Filter E-capacitor 1 NITSUKO MDST22W474K S2122-4746-81

0.47uF/450V ±10% P=15mm NISSEI MMX S2122-4748-1D

56 CN1 Power inlet connector PCB TYPE. 1 Supercom SC-8R S3012-0025-02

250V/10A Large 3Pin ST-01 S3012-0025-01

INALWAYS 0711-5-P7L15 S3012-0025-03

57 (V+,V-) DC CABLE 1 JH

DIN 4 PIN L=1500mm CAROL 92041502 S3500-0277-00

JVE

58 D2 Diode isolated package 1 NI FSF10A60 S0272-0001-01

10A/600V ultra fast diode ST STTH12R06

59 D3 Fast-recovery diode 1 GS S0212-0008-04

1A/1000V 75ns FAGOR S0212-0008-01

Philips S0212-0008-08

60 D5,9 Schottky diode isolated package 2 shindengen SF30NC15 S0222-0023-06

30A/150V TO-220 NI FCH30A15 S0222-0023-01

61 D4 Schottky diode isolated package 1 shindengen SF30JC10 S0222-0021-01

30A/100V TO-220 NI FCH30A10 S0222-0021-0H

62 D10 Fast-recovery diode 1 GS UF4003 S0212-0003-02

1A/200V 50ns FAGOR UF4003 S0212-0003-01

PHILIPS BYV26A S0212-0003-05

63 F1 ROUND FUSE 1 SAVE S34CB-3152-08

Li Shin International Enterprise Corp.F3.15A/250V S34CB-3152-09

WICKMANN S34CB-3152-05

64 CA1 0226A Top + bottom case PC 1 S4220-0052-00/10

65 HS1 HEAT SINK for BD1 1 S4000-0186-10

56x13x28.5x3 AL

66 HS2 HEAT SINK for Q3,D2,Q5 1 S4000-0185-00

145x28.5x3 AL

67 HS3 HEAT SINK L-bracket for D4,5,9 1 S4000-0189-10

171x63x34x1.5 AL

68 HS4 HEAT SINK for T1,C7,T2,T3 1 S4000-0187-00

AL cover145x56.7x3 AL

69 HS5 HEAT SINK 0.3 AL cover 2 S4000-0188-10

168x60.35x35.75x0.3 AL

70 IC2 Photo-coupler 1 SHARP PC-817C S0002-0004-01

4P 200-400CTR 5KV NEC PS2561-1-V S0002-0005-01

SHARP PC123 S0062-0005-03

LITEON LTV817MC S0002-0004-03

71 IC5 SHUNT regulator 1% TO-92 1 Fairchild KA431AZ-MTA S0002-0003-06

UTC TL431 S0002-0003-0P

72 L2,3,4 Bead core+wire 3 Kingcore K5B S5052-0005-00

3.5×3×0.8-T52CHILISIN

73 J5,7,8,R21 Bead core+wire 4 Kingcore K5B S5052-0009-00

3.5×8×0.8-T52CHILISIN

74 J9 Jump-wire 1 SYNTON-TECH JW S3610-8000-00

Li Shin International Enterprise Corp.0.8 ×10mm YAGEO JW

TAI LIN

TY-OHM


0.8 ×12.5mm YAGEO JWTAI LIN

TY-OHM


0.6 ×10mm YAGEO JWTAI LIN

TY-OHM

77 LF2 Jump-wire 2 SYNTON-TECH JW S3610-8000-00

0.8 ×10.5mm YAGEO JWTAI LIN

TY-OHM

78 R63 Jump-wire 2 SYNTON-TECH JW S3610-8000-00

0.8 × 5mm YAGEO JWTAI LIN

TY-OHM

79 TVS1 TVS 1.5KE27A 1 FAGOR 1.5KE27A S0232-0075-BL

27V 5% 1500W LITEON 1.5KE27AON 1.5KE27A

80 LED1 LED lamp 1 S0512-0002-00

3 GREEN Huey Jann HB3b-143

81 L1 CHOKE 1 LSE SP03C-015 S5042-0055-00

T68-26A L 200uH

82 LABEL Lable for ratings( ) 1 CM-2 S73C1-0048-42

0.304mm thick 0226B24160 TY

PC QK

83 LF1 AC line filter +BASE 1 LI SHIN LS-SP03F-009 S5042-0054-0A

T16x10x8 L > 10mH

84 LF3 AC line filter+ +BASE 1 LI SHIN LS-SP03F-008 S5042-0043-0A

T16x12x8mm L> 4mH

85 CHOKE CHOKE for J13 N N' 1 LI SHIN LS-SP03C-023 S5042-0057-00

14*8*3-C A07*SM100 680uH

86 MY1 Mylar color : Black 1 S6130-0044-00

Li Shin International Enterprise Corp.ISL-SHEET PP

87 PCB 1 PCB Main 0226A RA.8 1 S0802-2601-A80

1.6mm 2oz CEM-1

88 Q3 MOSFET 1 IR IRFP460 S0142-0011-0B

20~21A/500V TO-3P Rds < 0.26 ohm FUJI 2SK3523-01

FUJI 2SK3522-01

89 Q5 COOL- MOSFET 1 Infinion SPA11N80C3 S0152-0006-09

11A 800V

90 R34 Current sense resistor 1 S15A3-022B-000.22 2WS 5% NKNP

91 R26 Current sense resistor 1 S15A3-024B-00

R.NRW 0.24 2WS 5% J

92 RB1 Rubber for foot 4 S6160-0001-00

7mm thick 2.0mm Kang Yang RF7.0-2.0

93 RB2 Rubber for PCB & MY1 1 S6160-0001-00

7mm thick 2.0mm Kang Yang RF7.0-2.0

94 SC1 screw for bottom cover 4 S4350-0005-00

2.6×16

95 SC2 screw for D2,Q5 2 S432C-0003-00

M3*10L

96 SC3 screw M3*12L 3 S432C-0004-00

for Q3*1, *2

97 SC4 SCREW M3*6 FOR HS3-PCB 3 S4321-0002-00

ASSEMBLY

Li Shin International Enterprise Corp.98 SC5 SCREW+M #2 M3x6L 100° 3 S432C-0001-00

TF NI for HS4*3

99 SC6 SCREW+M M3x6L TF ZC 1 S4325-0001-00

for BD1*1

100 NUT+KW M3 FORQ3,5,D2 3 S4329-0001-00

101 T1 PFC Choke 1 LI SHIN SP03C-017 S5012-0034-00

RM-12 320uH

102 T3 CHOCK 1 LSE SP03C-018 S5012-0035-00

RM-12 50uH

103 T2 Power transformer 1 LSE SP03P-020 S5102-2624-11

DS3324 8mH

104 TR2 100K, 3mm, 3% NTC 1 Thinking TTC3A104H4192E S1812-0019-01

105 GND choke 1007, 18awg, yellow/green wire 1 S5042-0052-00

series 7T ring core

106 FU-DA 1 for T1,C7 2 S6150-0030-00

25×15×2.0mm

107 FU-DA 2 for C7 1 S6150-0004-00

25x12.5x1.5mm GRAY

108 FU-DA 3 for D4,5,9 1 S6150-0028-00ISL-SHEET 44.3x29.1x0.15 RB

109 FU-DA 4 for T3 1 S6150-0031-00

25×15×2.5mm

110 CONNECT for C7 1 JWT A2541WV2-Q1x6P-R S3122-0039-03

6 pin , PICH=2.54mm E&T

111 TRS-CLIP for D4,5,9 1 S4167-0001-00

35x9x1 SECC

112 for Q3 1 S6110-0009-00

25*19, T=0.15

Li Shin International Enterprise Corp.

113 Tape UL yellow tape on inside of HS2 1 S640Y-0005-10

50mm( ) t=0.025mm 2 layer

114 Tape UL yellow tape on inside of HS4 1 S640Y-0039-40

58mm( )x72mm( )

115 Tape UL yellow tape for HS2 1 S640Y-0009-40

25mm( )x25mm( )

116 Tape UL yellow tape for HS5 2 S640Y-0002-10

15mm( )x45

117 for T2 1 Toshiba 3941 S8108-0001-01

Toshiba 3941

118 Q3,Q5,D2,D4,D5,D9,BD1 7 S8105-0001-00

119 SCREW GLUE BB-2100 3 S8101-0001-01

BB-2100

120 SILICON GLUE 3 TOSHIBA TSE-3854D-G S8109-0001-03

WACKER RTV 9132.513 S8109-0001-01

DOW CORNING 3165 S8109-0001-02

121 1 BUBBLE BAG 1 S7130-0010-00

250x150

122 2 TRAY 2/15 S7000-0002-01

430X360x4

123 3 PARTITION 1/15 S7010-0059-00

436x366x206x5

124 4 OUT-CTN 1/15 S7030-0022-00

436x366x213x7

Checked PreparedApproved

2003/9/20

11-1 ~ 1-5

22-1

33-1 ~ 3-3

44-1 ~ 4-6

55-1 ~ 5-11

66-1 ~ 6-3

77-1

CONTENTS


Circuit Diagram

Mechanical Drawing

PCB Layout Diagram

Bill Of Materials

Test Report

Safety License

6 - 1

1.UL/CUL E228710 UL6500 6 - 2

CERTIFICATE NO. STANDARDS

K60065HU09235-3001B2. KOREA 6 - 3

REV

SHEET

DATE

LI SHIN INTERNATIONAL ENTERPRISE CORP.L.S.E S.P.S

SAFETY ITEM

0.1

92/9/20

SHEET

DESCRIPTION : SAFETY AUTHORIZATION LIST

DOC TITLE : 60W AC ADAPTER

MODEL : 0226B24160

APPROVED BY CHECKED BY PREPARE BY

6-1

2003/9/22

11-1 ~ 1-5

22-1

33-1 ~ 3-3

44-1 ~ 4-6

55-1 ~ 5-11

66-1 ~ 6-3

77-1

CONTENTS


Circuit Diagram

Mechanical Drawing

PCB Layout Diagram

Bill Of Materials

Test Report

Safety License

Temperature Function Test : Model : LSE0226B24160

Test Item Specification Input , load Unit NO1 NO2 NO1 NO2 NO1 NO2

at 90V , 2.5A max. 90VAC/60Hz,6.67A A 2.09 2.08 2.08 2.07 2.06

at 265V , 1.25A max. 264VAC/50Hz,6.67A A 0.70 0.69 0.69 0.68 0.67

at 115V 100A max. 115VAC/60Hz,6.67A A N/A N/A 44.4 47.6 N/A N/A

at 230V 200A max. 230VAC/50Hz,6.67A A N/A N/A 57.8 61.2 N/A N/A

Hold-up time(FL) 8 msec min.at 100V 100VAC/60Hz,6.67A msec 18.4 21.9 20.0 23.5 22.7 25.3

100 msecs max at 110V 110VAC/60Hz,6.67A msec 2.4 2.9 2.6 3.2 2.9 3.4

100 msecs max at 230V 230VAC/50Hz,6.67A msec 2.6 3.1 2.9 3.3 3.3 3.6

1W max. at 240V 100VAC/60Hz, 0A W 0.6 0.6 0.5 0.5 0.4 0.4

1W max. at 240V 240VAC/50Hz, 0A W 0.8 0.8 0.7 0.7 0.6 0.6

115VAC , 83% Min 115VAC/60Hz,6.67A % 87.9% 88.3% 88.2% 88.9% 88.6% 89.4%

230VAC , 83% Min 230VAC/50Hz,6.67A % 88.3% 88.7% 88.7% 89.3% 89.2% 89.7%

90VAC/60Hz,6.67A/0A VDC 23.75/24.02 23.85/24.10 23.66/23.98 23.76/24.06 23.49/23.92 23.60/24.01

115VAC/60Hz,6.67A/0A VDC 23.75/24.02 23.85/24.10 23.66/23.98 23.76/24.06 23.49/23.92 23.60/24.01

230VAC/50Hz,6.67A/0A VDC 23.75/24.02 23.85/24.10 23.66/23.98 23.76/24.06 23.49/23.92 23.60/24.01

264VAC/50Hz,6.67A/0A VDC 23.75/24.02 23.85/24.10 23.66/23.98 23.76/24.06 23.49/23.92 23.60/24.01

90VAC/60Hz,6.67A mvp_p 86 83 64 61 48 44

115VAC/60Hz,6.67A mvp_p 92 87 66 63 51 46

230VAC/50Hz,6.67A mvp_p 105 102 85 81 67 62

264VAC/50Hz,6.67A mvp_p 113 108 90 85 70 66Overshoot(FL) 10% max. at input 100VAC 100VAC/60Hz,6.67A % 2.8% 2.9% 2.5% 2.7% 2.2% 2.4%Undershoot(FL) 10% max. at input 240VAC 240VAC/50Hz,6.67A % 3.7% 3.8% 3.3% 3.6% 3.0% 3.2%

0.95 min. at input 100VAC 100VAC/60Hz,6.67A -- 0.99 0.99 0.99 0.99 0.99 0.99

0.9 min. at input 240VAC 240VAC/50Hz,6.67A -- 0.97 0.97 0.97 0.97 0.97 0.97

Auto-recovery,No damage 90VAC/60Hz,6.67A -- OK OK OK OK OK OK

Auto-recovery,No damage 264VAC/50Hz,6.67A -- OK OK OK OK OK OK

12A max at 115V,auto-recovery 115VAC/60Hz, 6.67A ADC 6.68 6.68 6.68 6.68 6.68 6.68

12A max at 230V,auto-recovery 230VAC/50Hz, 6.67A ADC 6.68 6.68 6.68 6.68 6.68 6.68

30V max,Auto-recovery 90VAC/60Hz, 6.67A VDC N/A N/A 25.9 26.1 N/A N/A

30V max,Auto-recovery 264VAC/50Hz, 6.67A VDC N/A N/A 26.1 26.2 N/A N/A

dV +/- 1.5V 90VAC/60Hz,1A~3.3A V 0.13 0.14 0.41 0.42 0.10 0.12

dV +/- 1.5V 264VAC/50Hz,1A~3.3A V 0.14 0.15 0.41 0.42 0.11 0.13

dV +/- 1.5V 90VAC/60Hz,3.3A~6.67A V 0.32 0.31 0.31 0.30 0.30 0.29

dV +/- 1.5V 264VAC/50Hz,3.3A~6.67A V 0.32 0.31 0.31 0.30 0.30 0.29

Test result : PASS

Storage Scope : Tektronic TDS-3012,Current Probe : Tektronix AM502AREMARK: 1. RIPPLE & NOISE TEST : Tested by DC loading side parallel with a 47uF/EC and 0.1uF/cc capacitorsand Measured Band-Width with DC-20MHz.

REMARK: 2. STATIC O/P TEST : Tested on the O/P plug with matched socket (contact not too loose) and short

cable connected to DC load. The real output voltage shall be measured on the PCB output port V+ and V- .

Page 1

Output Transient

LI SHIN INTERNATIONAL ENTERPRISE CO. DESIGN QUALIFICATION TEST REPORT

OVP(FL)

Inrush current(FL)(cold start)

Power saving (NL)

SCP (FL)

Power factor (FL)

OCP(FL)

40 / 90%RH

350mVpp max.Ripple & Noise(FL)

Static O/P (FL)/(NL) 23V ~ 25V

Effiency % (FL)

Rise time(FL)

25 / 60%RH

I/P current(FL)

LISHININTERNATIONALENTERPRISECORP. APPROVAL SHEET · 2005-11-11 · APPROVAL SHEET CUSTOMER ú ILLO...

Documents

Transcript of LISHININTERNATIONALENTERPRISECORP. APPROVAL SHEET · 2005-11-11 · APPROVAL SHEET CUSTOMER ú ILLO...