LINTEL GUIDE 2016 - Stressline · This extended steel lintel range perfectly compliments our other...
Transcript of LINTEL GUIDE 2016 - Stressline · This extended steel lintel range perfectly compliments our other...
LINTEL GUIDE 2016
w w w . s t r e s s l i n e . n e t
T H E S O L I D C H O I C E
COMPANY HISTORY
Stressline Limited manufactures a wide range of structural building products for domestic and commercial sectors. Stressline is the first choice for builders, contractors & specifiers across the UK because of its ability to deliver high quality products on time and at the right price, ensuring projects are not disrupted and work is completed on time.
Stressline also supply direct to site or through a supply chain of merchants across the country, making sure their products are always highly accessible. Stressline’s customers choose them over other structural product manufacturers because of the promise to always be competitive on price, the mixed order delivery capabilities and the high quality service.
Stressline’s in-house technical and manufacturing departments have worked hard to deliver an extended range of steel lintels. The new lintel guide clearly lays out the extended standard range of steel lintels, and for the first time the prestressed concrete lintel range, allowing the customer the utmost flexibility and choice to satisfy their lintel requirements.
This extended steel lintel range perfectly compliments our other structural building products.
We manufacture a complete range of prestressed concrete products in addition to the prestressed concrete lintels; including flooring beams (suitable for concrete or insulation infill), hollowcore flooring, and walling panels. Precast items available include padstones, stairflights and landing slabs, although our extensive design and manufacturing resource enables special projects to be produced cost effectively. Our non-structural range includes fencing, landscape, walling, and decorative cast stone products.
BUILD ON OUR STRENGTH
INTRODUCING OUR EXTENDED LINTEL RANGE
STRUCTURAL BUILDING PRODUCTS
2 © Stressline Limited 2016
BUIL
D O
N O
UR
STRE
NG
TH
CO
NTEN
TSCONTENTS
© Stressline Limited 2016
SERVICE DELIVERY 4
ROLLED STEEL SECTIONS LINTELS 33 - 35
240
213
CLOSED EAVES LINTELS 36 - 39
50 44 98
150
TIMBER FRAME LINTELS 40 - 41
98 47
‘h’ n
omin
al
SINGLE LEAF EXTERNAL SOLID WALL LINTELS 42 - 43
95
‘h’ n
omin
al
INTERNAL SOLID WALL LINTELS 44 - 46
200
‘h’ n
omin
al
EXTERNAL SOLID WALL LINTELS 47 - 48
200
‘h’ n
omin
al
PADSTONES 63
SPECIALS 59 - 62
CAST STONE 65
TECHNICAL 66
CAVITY WALL: STANDARD LEAF LINTELS 5 - 11
CAVITY WALL: WIDE INNER LEAF LINTELS 12 - 18
CAVITY WALL: WIDE OUTER LEAF LINTELS 19 - 25135 94 98
‘h’ n
omin
al
ARCH FORMERS 58
CAVITY WALL: SHORT OUTER LEAF LINTELS 26 - 32
PRESTRESSED CONCRETE: STANDARD LINTELS 49 - 51
100
215
PRESTRESSED CONCRETE: HIGH-STRENGTH LINTELS 52 - 54
100
110
PRESTRESSED CONCRETE: FAIR FACED LINTELS 55 - 57
100
140
OTHER STRESSLINE PRODUCTS 64
333
SERV
ICE
DEL
IVER
YSERVICE DELIVERY OUR COMMITMENT TO YOUSALES & SUPPORTOur area sales managers and sales technicians are able to assist you with your specification needs. Whether advice is needed for a single lintel, or a comprehensive take off and pricing schedule for a multi dwelling development, our team is here to help.
This brochure and website outline our ranges to assist your selection.
In addition, our unique ability to manufacture a range of structural building components offers the specifier and the buyer a complete solution for structural flooring (both beam and hollowcore), steel and concrete lintels and structural precast products, including padstones, staircases and landings.
Our flexible design and manufacturing facilities enable your “special” lintel requirements to be produced quickly and efficiently.
OUR PRODUCTSOur comprehensive range of standard steel and concrete lintels offers design capability for all circumstances, designed to the relevant BS EN standards and with the reassurance of 2009: BS EN ISO 9001:2008 management standard.
The cavity lintel range is supplied with captive insulation to ensure that it is not displaced. The fabricated ranges are manufactured with a proven non-welded method creating a secure connection that has not compromised the galvanised protection.
Our ranges of prestressed concrete lintels are manufactured using machinery and processes designed by our own engineers. This has enabled the maximum strength to section available, whilst producing high volumes of consistent quality products.
DELIVERYAll our products are delivered on flat bed articulated or rigid lorries, with the option of either self offload or crane offload. Depending on the customer’s requirements both steel and concrete lintels are packaged in stock packs or in consignment loads (with the option of house plots and locations marked on the product).
As we are located centrally we are able to supply all our standard products nationally, with delivery typically three to eight working days.
OUR PROMISEStressline understand the day-to-day challenges you face on a building site and the importance of working with a supplier you can trust. Our promise is simple – to deliver competitively priced products, on time, to the required specification.
ACCREDITATIONSStressline has an on-going commitment to improving both product and management systems; • 1989: BSI Quality Assurance Accreditation
to ISO 9001• 2003: BS EN ISO 9001:2000 • 2009: BS EN ISO 9001:2008
ENVIRONMENTAL AND SUSTAINABILITY We recognise our responsibilities to the environment. We are committed to developing, implementing and reviewing our management and operational policies and procedures to minimise our environmental impact. Our integrated management system includes all our compliance policies and achievement targets.
From our ongoing environmental and sustainability commitments we have continued to achieve significant reductions in our impact as manufacturers and distributors. One major environmental benefit shared with our existing customers is the ability to source our complete range of products and for them to be delivered as a mixed load on one vehicle, instead of separate deliveries which creates wasteful and unnecessary movements.
© Stressline Limited 20164
STAN
DA
RD LEA
F
APPLICATIONStandard and Heavy Duty (HD and HDX)Designed to support:• Masonry loads• Masonry loads and uniformly distributed timber
floor loads• Uniformly distributed roof loads (in most cases
HD lintel type is required)
Extra Heavy Duty (XHD) and Composite Extra Heavy Duty (CXHD) Designed to support:• Concrete floor loads• Attic truss loads• Point loads: compound trusses, steel beams, etc
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTES For general installation notes please refer to page 66.
Additional installation requirements for Composite Extra Heavy Duty (CXHD) lintels• Ensure that the inner leaf channel is filled with
well cured masonry before work proceeds over. Masonry needs to be built tightly against the vertical section of the channel and a mortar joint added to the top of masonry, so that the loads from units above are spread evenly over the inner flange of the lintel.
• Composite lintels should be adequately propped during construction, at maximum 1.2 metre centres. Props should not be removed until the mortar has cured.
ADVANTAGES• Easy to install and suitable for a variety of
applications• Galvanised coating ensures durability/longevity• Built-in plaster key: perforated base plate to
inner flange• Excellent thermal efficiency • Built-in continuous insulation• Can be manufactured with wide and short
leaf detail.
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable)RM – Resistance Moment (Serviceable)SWL – Safe Working Load
% If in doubt please contact our technical department on
01455 272457
CAVITY WALL STANDARD LEAF
© Stressline Limited 2016 5
© Stressline Limited 2016
CA
VIT
Y 5
0SL50
SL50 HD
SL50 CXHD 150
SL50 CXHD 225
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf50 - 65mm cavity100 -115mm inner leaf
100mm outer leaf50 - 65mm cavity100 -115mm inner leaf
100mm outer leaf50 - 65mm cavity100 -115mm inner leaf
100mm outer leaf50 - 65mm cavity100 -115mm inner leaf
SL50 HDX
SL50 XHD 225
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf50 - 65mm cavity100 -115mm inner leaf
100mm outer leaf50 - 65mm cavity100 -115mm inner leaf
6001200
95 113 134 140 153 190 190
6.2 6.8 7.4 7.6 8.0 9.2 13.8
16 17 22 23 24 28 28
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
12 13 17 18 19 22 22
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
2.2
6001800
236
19.0
89
75
21.5
2.9 4.5 5.6 6.8 10.0 13.3
13501500
236
19.0
71
60
21.5
19503000
16501800
6001800
156
15.3
72
61
12.6
156
15.3
62
52
12.6
19502100
156
15.3
53
45
12.6
22502400
156
15.3
41
34
12.6
25502700
236
19.0
55
46
21.5
31503900
19502100
236
19.0
42
40
20.5
40504500
236
19.0
37
35
20.5
46504800
236
19.0
32
30
20.5
49505100
22502400
6001200
140 153 190 190 225 225 225 225
7.6 8.0 9.2 13.8 15.5 15.5 15.5 17.8
42 40 41 41 41 35 33 33
33 31 32 32 32 27 26 26
5.6 6.8 10.0 13.3 15.5 15.5 15.5 16.2
13501500
16502100
22502700
28503150
33003600
37503900
40504200
25503000
31503900
225
15.5
28
22
16.2
40504200
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6002100
225
26.1
79
66
20.6
225
26.1
60
51
20.6
22502700
6001200
153
8.0
51
40
6.8
185
9.1
53
41
9.0
13501500
190
13.8
64
50
13.3
16501800
225
15.5
59
46
15.5
19502250
225
17.8
50
39
16.2
24002700
225
26.1
49
41
20.6
28503300
225
26.1
41
34
20.6
34503900
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
See additional installation requirements on page 5.
See additional installation requirements on page 5.
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
225
17.8
28
22
16.2
43504800
225
26.1
40
33
20.6
4050 4200
98 44 98
98 44 98
98 44 98
98 44 98
98 44 98
98 44 98
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
6
© Stressline Limited 2016
CA
VITY
70SL70
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
SL70 HD
SL70 CXHD 225
SL70 CXHD 150
100mm outer leaf70 - 85mm cavity100 -115mm inner leaf
100mm outer leaf70 - 85mm cavity100 -115mm inner leaf
100mm outer leaf70 - 85mm cavity100 -115mm inner leaf
100mm outer leaf70 - 85mm cavity100 -115mm inner leaf
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
SL70 XHD 225
SL70 HDX
100mm outer leaf70 - 85mm cavity100 -115mm inner leaf
100mm outer leaf70 - 85mm cavity100 -115mm inner leaf
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
236 236 236 236 236 236
19.8 19.8 19.8 19.8 19.8 19.8
89
75
21.5
71
60
21.5
55
46
21.5
42 37 32
40 35 30
20.5 20.5 20.5
6001800
19503000
31503900
40504500
46504800
49505100
156 156 156 156
16.1 16.1 16.1 16.1
72 62 53 41
61
12.6
52
12.6
45 34
12.6 12.6
6001800
19502100
22502400
25502700
225 225 225
27.0
66
27.0
51
27.0
41
79
20.6
60
20.6
49
20.6
6002100
22502700
28503300
225
27.0
34
41
20.6
34503900
153 185 190 225 225
8.2 9.2 14.1 15.7 18.6
51 53 64 59 50
40
6.8
41
9.0
50 46 39
13.3 15.5 16.2
6001200
13501500
16501800
19502250
24002700
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 19:1 (kN)
SWL 5:1 (kN)
RM (kNm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)See additional installation requirements on page 5.
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
See additional installation requirements on page 5.
6001200
95
6.4
16
12
2.2
113
6.9
17
13
2.9
13501500
134
7.6
22
17
4.5
16501800
140
7.8
23
18
5.6
19502100
153
8.2
24
19
6.8
22502400
190
9.4
28
22
10.0
25503000
190
14.1
28
22
13.3
31503900
225
15.7
28
22
16.2
40504200
225
18.6
28
22
16.2
43504800
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
6001200
140 153 190 190 225 225 225 225
7.8 8.2 9.4 14.1 15.7 15.7 15.7 18.6
42 40 41 41 41 35 33 33
33 31 32 32 32 27 26 26
5.6 6.8 10.0 13.3 15.5 15.5 15.5 16.2
13501500
16502100
22502700
28503150
33003600
37503900
40504200
225
27.0
33
40
20.6
4050 4200
98 64 98
98 64 98
98 64 98
98 64 98
98 64 98
98 64 98
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
7
CA
VIT
Y 9
0
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
RM (kNm)
SWL 19:1 (kN)
6001800
156 156 156 156
17.0 17.0 17.0 17.0
72 62 53 41
61
12.6
52
12.6
45 34
12.6 12.6
19502100
22502400
25502700
6001800
236 236 236 236 236 236
20.7 20.7 20.7 20.7 20.7 20.7
89
75
21.5
71
60
21.5
55
46
21.5
42 37 32
40 35 30
20.5 20.5 20.5
19503000
31503900
40504500
46504800
49505100
6001200
140 153 190 190 225 225 225 225
8.3 8.7 9.9 14.8 16.5 16.5 16.5 19.8
42 40 41 41 41 35 33 33
33 31 32 32 32 27 26 26
5.6 6.8 10.0 13.3 15.5 15.5 15.5 16.2
13501500
16502100
22502700
28503150
33003600
37503900
40504200
SL90
SL90 HD
SL90 CXHD 150
SL90 CXHD 225
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Not suitable to support precast concretefloors, attic trusses, heavy point loads.
Not suitable to support precast concretefloors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf90 -105mm cavity100 -115mm inner leaf
100mm outer leaf90 -105mm cavity100 -115mm inner leaf
100mm outer leaf90 -105mm cavity100 -115mm inner leaf
100mm outer leaf90 -105mm cavity100 -115mm inner leaf
6001200
153 185 190 225 225
8.7 9.7 14.8 16.5 19.8
51 53 64 59 50
40 41 50 46 39
6.8 9.0 13.3 15.5 16.2
13501500
16501800
19502250
24002700
6002100
225 225 225
27.8 27.8 27.8
79 60 49
66 51 41
20.6 20.6 20.6
22502700
28503300
225
27.8
41
34
20.6
34503900
SL90 HDX
SL90 XHD 225
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Not suitable to support precast concretefloors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf90 -105mm cavity100 -115mm inner leaf
100mm outer leaf90 -105mm cavity100 -115mm inner leaf
See additional installation requirements on page 5.
See additional installation requirements on page 5.
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
95
6.9
16
12
2.2
113
7.4
17
13
2.9
13501500
134
8.1
22
17
4.5
16501800
140
8.3
23
18
5.6
19502100
153
8.7
24
19
6.8
22502400
190
9.9
28
22
10.0
25503000
190
14.8
28
22
13.3
31503900
225
16.5
28
22
16.2
40504200
225
19.8
28
22
16.2
43504800Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
© Stressline Limited 2016
225
27.8
40
33
20.6
40504200
98 84 98
98 84 98
98 84 98
98 84 98
98 84 98
98 84 98
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
8
CA
VITY
110
100mm outer leaf110 - 125mm cavity100 -115mm inner leaf
100mm outer leaf110 - 125mm cavity100 -115mm inner leaf
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf110 - 125mm cavity100 -115mm inner leaf
SL110 HD
SL110 CXHD 225
SL110 CXHD 150
100mm outer leaf110 - 125mm cavity100 -115mm inner leaf
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf110 - 125mm cavity100 -115mm inner leaf
SL110 XHD 225
SL110 HDX
100mm outer leaf110 - 125mm cavity100 -115mm inner leaf
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
SL110
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Weights (kg/m)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
SWL 19:1 (kN)
RM (kNm)
236 236 236 236 236 236
21.6 21.6 21.6 21.6 21.6 21.6
89
75
21.5
71
60
21.5
55
46
21.5
42 37 32
40 35 30
20.5 20.5 20.5
6001800
19503000
31503900
4050 4500
46504800
49505100
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
156 156 156 156
17.9 17.9 17.9 17.9
72 62 53 41
61
12.6
52
12.6
45 34
12.6 12.6
6001800
19502100
22502400
2550 2700
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 19:1 (kN)
SWL 5:1 (kN)
RM (kNm)
225 225 225 225
28.7
66
28.7
51
28.7
41
28.7
34
79
20.6
60
20.6
49
20.6
41
20.6
6002100
22502700
28503300
34503900
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
153 185 190 225 225
9.0 10.0 15.2 16.9 20.6
51 53 64 59 50
40
6.8
41
9.0
50 46 39
13.3 15.5 16.2
6001200
13501500
16501800
19502250
24002700
See additional installation requirements on page 5.
See additional installation requirements on page 5.
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
95
7.1
16
12
2.2
113
7.7
17
13
2.9
13501500
134
8.3
22
17
4.5
16501800
140
8.5
23
18
5.6
19502100
153
9.0
24
19
6.8
22502400
190
10.1
28
22
10.0
25503000
190
15.2
28
22
13.3
31503900
225
16.9
28
22
16.2
40504200
225
20.6
28
22
16.2
43504800Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
6001200
140 153 190 190 225 225 225 225
8.5 9.0 10.1 15.2 16.9 16.9 16.9 20.6
42 40 41 41 41 35 33 33
33 31 32 32 32 27 26 26
5.6 6.8 10.0 13.3 15.5 15.5 15.5 16.2
13501500
16502100
22502700
28503150
33003600
37503900
40504200
© Stressline Limited 2016
225
28.7
33
40
20.6
4050 4200
98 104 98
98 104 98
98 104 98
98 104 98
98 104 98
98 104 98
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
9
© Stressline Limited 2016
CA
VIT
Y 1
30
SL130 HD
SL130 CXHD 150
SL130 CXHD 225
Not suitable to support precast concretefloors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
SL130
Not suitable to support precast concretefloors, attic trusses, heavy point loads.
100mm outer leaf130 - 145mm cavity100 -115mm inner leaf
100mm outer leaf130 - 145mm cavity100 -115mm inner leaf
100mm outer leaf130 - 145mm100 -115mm inner leaf
100mm outer leaf130 - 145mm100 -115mm inner leaf
SL130 HDX
SL130 XHD 225
Not suitable to support precast concretefloors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf130 - 145mm cavity100 -115mm inner leaf
100mm outer leaf130 - 145mm100 -115mm inner leaf
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
95
7.3
16
12
2.2
113
7.9
17
13
2.9
13501500
134
8.6
22
17
4.5
16501800
140
8.8
23
18
5.6
19502100
153
9.2
24
19
6.8
22502400
190
10.4
28
22
10.0
25503000
190
15.5
28
22
13.3
31503900
225
17.2
28
22
16.2
4050 4200
225
21.4
28
22
16.2
43504800Lintels are available in increments of 150mm
6001200
140 153 190 190 225 225 225 225
8.8 9.2 10.4 15.5 17.2 17.2 17.2 21.4
42 40 41 41 41 35 33 33
33 31 32 32 32 27 26 26
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm) 5.6 6.8 10.0 13.3 15.5 15.5 15.5 16.2
13501500
16502100
22502700
28503150
33003600
37503900
40504200Lintels are available in increments of 150mm
6001800
236 236 236 236 236 236
22.5 22.5 22.5 22.5 22.5 22.5
89 71 55 42 37 32
75 60 46 40 35 30
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm) 21.5 21.5 21.5 20.5 20.5 20.5
19503000
31503900
40504500
46504800
49505100Lintels are available in increments of 150mm
6001200
6001800
225
156
225
156
225
156
225
156
29.6
18.8
29.6
18.8
29.6
18.8
29.6
18.8
79
72
60
62
49
53
41
41
66
61
51
52
41
45
34
34
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Weights (kg/m)
Weights (kg/m)
SWL 5:1 (kN)
SWL 5:1 (kN)
SWL 19:1 (kN)
SWL 19:1 (kN)
RM (kNm)
RM (kNm)
20.6
12.6
20.6
12.6
20.6
12.6
20.6
12.6
22502700
19502100
28503300
22502400
34503900
25502700
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
6001200
153 185 190 225 225
9.2 10.2 15.5 17.2 21.4
51 53 64 59 50
40 41 50 46 39
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm) 6.8 9.0 13.3 15.5 16.2
13501500
16501800
19502250
24002700Lintels are available in increments of 150mm
225
29.6
40
33
20.6
4050 4200
98 124 98
‘h’ n
om
inal
98 124 98
‘h’ n
om
inal
98 124 98
‘h’ n
om
inal
98 124 98
225
98 124 98
150
98 124 98
230
See additional installation requirements on page 5.
See additional installation requirements on page 5.
10
© Stressline Limited 2016
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
95
7.6
16
12
2.2
113
8.2
17
13
2.9
13501500
134
8.8
22
17
4.5
16501800
140
9.0
23
18
5.6
19502100
153
9.4
24
19
6.8
22502400
190
10.6
28
22
10.0
25503000
190
15.9
28
22
13.3
31503900
225
17.6
28
22
16.2
40504200
225
22.3
28
22
16.2
43504800Lintels are available in increments of 150mm
CA
VITY
150
See additional installation requirements on page 5.
See additional installation requirements on page 5.
SL150 HD
SL150
SL150 CXHD 150
SL150 CXHD 225
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf150 - 165mm cavity100 -115mm inner leaf
100mm outer leaf150 - 165mm cavity100 -115mm inner leaf
100mm outer leaf150 - 165mm cavity100 -115mm inner leaf
100mm outer leaf150 - 165mm cavity100 -115mm inner leaf
SL150 HDX
SL150 XHD 225
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf150 - 165mm cavity100 -115mm inner leaf
100mm outer leaf150 - 165mm cavity100 -115mm inner leaf
6001200
140 153 190 190 225 225 225 225
9.0 9.4 10.6 15.9 17.6 17.6 17.6 22.3
42 40 41 41 41 35 33 33
33 31 32 32 32 27 26 26
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm) 5.6 6.8 10.0 13.3 15.5 15.5 15.5 16.2
13501500
16502100
22502700
28503150
33003600
37503900
40504200Lintels are available in increments of 150mm
6001800
236 236 236 236 236 236
23.4 23.4 23.4 23.4 23.4 23.4
89 71 55 42 37 32
75 60 46 40 35 30
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm) 21.5 21.5 21.5 20.5 20.5 20.5
19503000
31503900
40504500
46504800
49505100Lintels are available in increments of 150mm
6002100
6001800
225
156
225
156
225
156 156
30.5
19.7
30.5
19.7
30.5
19.7 19.7
79
72
60
62
49
53 41
66
61
51
52
41
45 34
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Weights (kg/m)
Weights (kg/m)
SWL 5:1 (kN)
SWL 5:1 (kN)
SWL 19:1 (kN)
SWL 19:1 (kN)
RM (kNm)
RM (kNm)
20.6
12.6
20.6
12.6
20.6
12.6 12.6
22502700
19502100
28503300
22502400
225
30.5
41
34
20.6
34503900
25502700
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
6001200
153 185 190 225 225
9.4 10.5 15.9 17.6 22.3
51 53 64 59 50
40 41 50 46 39
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm) 6.8 9.0 13.3 15.5 16.2
13501500
16501800
19502250
24002700Lintels are available in increments of 150mm
225
30.5
40
33
20.6
4050 4200
98 144 98
‘h’ n
om
inal
98 144 98
‘h’ n
om
inal
98 144 98
‘h’ n
om
inal
98 144 98
225
98 144 98
150
98 144 98
230
11
© Stressline Limited 2016
WID
E IN
NER
LEA
F (W
IL)
APPLICATIONThese lintels are suitable to support a 125-150mm inner leaf of blockwork.
Standard (WIL) and Heavy Duty (HD WIL & HDX WIL)Designed to support:• Masonry loads• Masonry loads and uniformly distributed timber
floor loads• Uniformly distributed roof loads (in most cases
HD lintel type is required)
Extra Heavy Duty (XHD WIL) and Composite Extra Heavy Duty (CXHD WIL)Designed to support:• Concrete floor loads• Attic truss loads• Point loads: compound trusses, steel beams,
etc
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTESFor general installation notes please refer to page 66.
Additional installation requirements for Composite Extra Heavy Duty (CXHD WIL) • Ensure that the inner leaf channel is
filled with well cured masonry before work proceeds over. Masonry needs to be built tightly against the vertical section of the channel and a mortar joint added to the top of masonry, so that the loads from units above are spread evenly over the inner flange of the lintel.
• Composite lintels should be adequately propped during construction, at maximum 1.2 metre centres. Props should not be removed until the mortar has cured.
ADVANTAGES:• Easy to install and suitable for a variety of
applications• Galvanised coating ensures durability/
longevity• Built-in plaster key – perforated base plate to
inner flange• Excellent thermal efficiency• Built-in continuous insulation• Can be manufactured with a short/reduced
outer toe (SOL) to suit a cant brick detail or feature stone head.
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable)RM – Resistance Moment (Serviceable)SWL – Safe Working Load
% If in doubt please contact our technical department on
01455 272457
CAVITY WALL WIDE INNER LEAF (WIL)
12
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001800
236 236 236 236 236 236
20.1 20.1 20.1 20.1 20.1 20.1
89
75
21.5
71
60
21.5
55
46
21.5
42 37 32
40 35 30
20.5 20.5 20.5
19503000
31503900
40504500
46504800
49505100Lintels are available in increments of 150mm
© Stressline Limited 2016
SL150
100mm outer leaf50 - 65mm cavity125 -150mm inner leaf
100mm outer leaf50 - 65mm cavity125 -150mm inner leaf
100mm outer leaf50 - 65mm cavity125 -150mm inner leaf
100mm outer leaf50 - 65mm cavity125 -150mm inner leaf
SL50 WIL
SL50 HD WIL
SL50 CXHD 150 WIL
SL50 CXHD 225 WIL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf50 - 65mm cavity125 -150mm inner leaf
100mm outer leaf50 - 65mm cavity125 -150mm inner leaf
SL50 HDX WIL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
SL50 XHD 225 WIL
See additional installation requirements on page 12.
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001800
156 156 156
16.3 16.3 16.3
72
61
62
52
53
45
12.6 12.6 12.6
19502100
22502400
See additional installation requirements on page 12.
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6002100
225 225 225
28.2 28.2 28.2
79 60 49
66 51 41
20.6 20.6 20.6
22502700
28503300
225
28.2
41
34
20.6
34503900Lintels are available in increments of 150mm
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm600
1200
140 153 190
12.3 13.0 14.7
58 52 41
46 41 32
7.7 8.8 13.3
13501500
16502700
225
16.4
33
26
15.5
28503900
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm600
1200
153 185 190
13.0 14.5 14.7
67 58 64
52 46 50
8.8 9.9 13.3
13501500
16501800
225
16.4
59
46
15.5
19502250
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
95
10.2
26
20
3.5
113
11.0
26
20
4.5
13501500
134
12.0
31
24
6.4
16501800
140
12.3
31
24
7.7
19502100
153
13.0
31
24
8.8
22502400
190
14.7
37
29
13.3
25503000
190
14.7
30
23
13.3
31503600
190
14.7
28
22
13.3
37503900
225
16.4
28
22
16.2
40504200Lintels are available in increments of 150mm
CA
VITY
50 WIL
225
18.7
28
22
16.2
4350 4800
225
18.7
33
26
16.2
4050 4200
225
18.7
50
39
16.2
2400 2700
225
28.2
40
33
20.6
4050 4200
156
16.3
41
34
12.6
2550 2700
98 44 135
98 44 135
98 44 135
98 44 140
98 44 135
98 44 135
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
13
CA
VIT
Y 7
0 W
IL
© Stressline Limited 2016
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001800
236 236 236 236 236 236
20.9 20.9 20.9 20.9 20.9 20.9
89
75
21.5
71
60
21.5
55
46
21.5
42 37 32
40 35 30
20.5 20.5 20.5
19503000
31503900
40504500
4650 4800
49505100Lintels are available in increments of 150mm
See additional installation requirements on page 12.
100mm outer leaf70 - 85mm cavity125-150mm inner leaf
100mm outer leaf70 - 85mm cavity125 -150mm inner leaf
100mm outer leaf70 - 85mm cavity125 - 150mm inner leaf
100mm outer leaf70 - 85mm cavity125 -150mm inner leaf
SL70 WIL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
SL70 HD WIL
SL70 CXHD 225 WIL
SL70 CXHD 150 WIL
100mm outer leaf70 - 85mm cavity125 -150mm inner leaf
100mm outer leaf70 - 85mm cavity125 -150mm inner leaf
Suitable to support precast concrete floors,attic trusses, and point loads.
SL70 XHD 225 WIL
SL70 HDX WIL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
95
10.4
26
20
3.5
113
11.3
26
20
4.5
13501500
134
12.3
31
24
6.4
16501800
140
12.6
31
24
7.7
19502100
153
13.2
31
24
8.8
22502400
190
15.0
37
29
13.3
25503000
190
15.0
30
23
13.3
31503600
190
15.0
28
22
13.3
37503900
225
16.6
28
22
16.2
40504200Lintels are available in increments of 150mm
225
19.4
28
22
16.2
4350 4800
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
6001200
140 153 190
12.6 13.2 15.0
58 52 41
46 41 32
7.7 8.8 13.3
13501500
16502700
225
16.6
33
26
15.5
28503900
225
19.4
33
26
16.2
4050 4200
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
153 185 190
13.5 15.0 15.3
67 58 64
52
8.8
46
9.9
50
13.3
6001200
13501500
16501800
225
16.9
59
46
15.5
19502250Lintels are available in increments of 150mm
225
19.4
50
39
16.2
2400 2700
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 19:1 (kN)
SWL 5:1 (kN)
RM (kNm)
225 225 225
29.1
66
29.1
51
29.1
41
79
20.6
60
20.6
49
20.6
6002100
22502700
28503300
225
29.1
34
41
20.6
34503900Lintels are available in increments of 150mm
225
29.1
33
40
20.6
4050 4200
See additional installation requirements on page 12.
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
156 156
17.2 17.2
72 62
61
12.6
52
12.6
6001800
19502100
156
17.2
53
45
12.6
22502400Lintels are available in increments of 150mm
156
17.2
41
34
12.6
2550 2700
98 64 135
98 64 135
98 64 135
98 64 140
98 64 135
98 64 135
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
14
© Stressline Limited 2016
CA
VITY
90 WIL
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
SWL 5:1 (kN)
SWL 19:1 (kN)
SWL 19:1 (kN)
RM (kNm)
RM (kNm)
SWL 19:1 (kN)
RM (kNm)
6001800
156 156 156
18.0 18.0 18.0
72 62 53
61
12.6
52
12.6
45
12.6
19502100
22502400
6001800
236 236 236 236 236 236
21.8 21.8 21.8 21.8 21.8 21.8
89
75
21.5
71
60
21.5
55
46
21.5
42 37 32
40 35 30
20.5 20.5 20.5
19503000
31503900
40504500
46504800
49505100
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Weights (kg/m)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
SWL 19:1 (kN)
SWL 19:1 (kN)
RM (kNm)
RM (kNm)
6001200
153 185 190 225
13.5 15.0 15.3 16.9
67 58 64 59
52 46 50 46
8.8 9.9 13.3 15.5
13501500
16501800
19502250
6002100
225 225 225 225
29.9 29.9 29.9 29.9
79 60 49 41
66 51 41 34
20.6 20.6 20.6 20.6
22502700
28503300
34503900
See additional installation requirements on page 12.
See additional installation requirements on page 12.
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
6001200
140 153 190 225
12.9 13.5 15.3 16.9
58 52 41 33
46 41 32 26
7.7 8.8 13.3 15.5
13501500
16502700
28503900
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
95
10.7
26
20
3.5
113
11.6
26
20
4.5
13501500
134
12.6
31
24
6.4
16501800
140
12.9
31
24
7.7
19502100
153
13.5
31
24
8.8
22502400
190
15.3
37
29
13.3
25503000
190
15.3
30
23
13.3
31503600
190
15.3
28
22
13.3
37503900
225
16.9
28
22
16.2
40504200Lintels are available in increments of 150mm
100mm outer leaf90 -105mm cavity125 -150mm inner leaf
100mm outer leaf90 -105mm cavity125 -150mm inner leaf
100mm outer leaf90 -105mm cavity125 -150mm inner leaf
100mm outer leaf90 -105mm cavity125 -150mm inner leaf
SL90 WIL
SL90 HD WIL
SL90 CXHD 150 WIL
SL90 CXHD 225 WIL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf90 -105mm cavity125 -150mm inner leaf
100mm outer leaf90 -105mm cavity125 -150mm inner leaf
SL90 HDX WIL
SL90 XHD 225 WIL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
225
20.2
28
22
16.2
4350 4800
225
20.2
33
26
16.2
4050 4200
225
20.2
50
39
16.2
2400 2700
225
29.9
40
33
20.6
4050 4200
156
18.0
41
34
12.6
2550 2700
98 84 135
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
98 84 135
98 84 135
98 84 140
98 84 135
98 84 135
15
© Stressline Limited 2016
CA
VIT
Y 1
10 W
IL
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Weights (kg/m)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 19:1 (kN)
SWL 5:1 (kN)
RM (kNm)
225 225 225
30.8
66
30.8
51
30.8
41
79
20.6
60
20.6
49
20.6
6002100
22502700
28503300
225
30.8
34
41
20.6
34503900
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
153 185 190
14.3 15.8 16.1
67 58 64
52
8.8
46
9.9
50
13.3
6001200
13501500
16501800
225
17.7
59
49
46
19502250
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
236 236 236 236 236 236
22.7 22.7 22.7 22.7 22.7 22.7
6001800
19503000
31503900
40504500
46504800
49505100
89
75
21.5
71
60
21.5
55
46
21.5
42 37 32
40 35 30
20.5 20.5 20.5
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
156 156
18.9 18.9
6001800
19502100
72 62
61
12.6
52
12.6
156
18.9
22502400
53
45
12.6See additional installation requirements on page 12.
See additional installation requirements on page 12.
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
6001200
140 153 190 225
13.7 14.3 16.1 17.7
58 52 41 33
46 41 32 26
7.7 8.8 13.3 15.5
13501500
16502700
28503900
6001200
95 113 134 140 153
11.5 12.4 13.4 13.7 14.3
26 26 31 31 31
20 20 24 24 24
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm) 3.5 4.5 6.4 7.7 8.8
13501500
16501800
19502100
22502400
190
16.1
37
29
13.3
25503000
190
16.1
30
23
13.3
31503600
190
16.1
28
22
13.3
37503900
225
17.7
28
22
16.2
40504200Lintels are available in increments of 150mm
100mm outer leaf110 - 125mm cavity125 -150mm inner leaf
100mm outer leaf110 - 125mm cavity125 -150mm inner leaf
100mm outer leaf110 - 125mm cavity125 -150mm inner leaf
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
SL110 HD WIL
SL110 CXHD 225 WIL
SL110 CXHD 150 WIL
100mm outer leaf110 - 125mm cavity125 -150mm inner leaf
SL110 WIL
100mm outer leaf110 - 125mm cavity125 -150mm inner leaf
100mm outer leaf110 - 125mm cavity125 -150mm inner leaf
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
SL110 XHD 225 WIL
SL110 HDX WIL
225
21.5
28
22
16.2
4350 4800
225
21.5
33
26
16.2
4050 4200
225
21.5
50
39
16.2
2400 2700
225
30.8
33
40
20.6
4050 4200
156
18.9
2550 2700
41
34
12.6
98 104 135
‘h’ n
om
inal
98 104 135
‘h’ n
om
inal
98 104 135
‘h’ n
om
inal
98 104 140
225
98 104 135
150
98 104 135
230
16
© Stressline Limited 2016
CA
VITY
130 WIL
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
SWL 5:1 (kN)
SWL 19:1 (kN)
SWL 19:1 (kN)
RM (kNm)
RM (kNm)
SWL 19:1 (kN)
RM (kNm)
6001800
156 156 156
19.8 19.8 19.8
72 62 53
61
12.6
52
12.6
45
12.6
19502100
22502400
6001800
236 236 236 236 236 236
23.6 23.6 23.6 23.6 23.6 23.6
89
75
21.5
71
60
21.5
55
46
21.5
42 37 32
40 35 30
20.5 20.5 20.5
19503000
31503900
40504500
46504800
49505100
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Weights (kg/m)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
SWL 19:1 (kN)
SWL 19:1 (kN)
RM (kNm)
RM (kNm)
6001200
153 185 190 225
14.6 16.2 16.4 18.1
67 58 64 59
52 46 50 46
8.8 9.9 13.3 15.5
13501500
16501800
19502250
6002100
225 225 225 225
31.7 31.7 31.7 31.7
79 60 49 41
66 51 41 34
20.6 20.6 20.6 20.6
22502700
28503300
34503900
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
6001200
140 153 190
14.0 14.6 16.4
58 52 41
46 41 32
7.7 8.8 13.3
13501500
16502700
225
18.1
33
26
15.5
28503900
6001200
95 113 134 140 153
11.9 12.7 13.7 14.0 14.6
26 26 31 31 31
20 20 24 24 24
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm) 3.5 4.5 6.4 7.7 8.8
13501500
16501800
19502100
22502400
190
16.4
37
29
13.3
25503000
190
16.4
30
23
13.3
31503600
190
16.4
28
22
13.3
37503900
225
18.1
28
22
16.2
40504200Lintels are available in increments of 150mm
SL130 HD WIL
SL130 CXHD 150 WIL
SL130 CXHD 225 WIL
Not suitable to support precast concretefloors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
SL130 WIL
Not suitable to support precast concretefloors, attic trusses, heavy point loads.
100mm outer leaf130 - 145mm cavity125 -150mm inner leaf
100mm outer leaf130 - 145mm cavity125 -150mm inner leaf
100mm outer leaf130 - 145mm cavity125 -150mm inner leaf
100mm outer leaf130 - 145mm cavity125 -150mm inner leaf
SL130 HDX WIL
SL130 XHD 225 WIL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf130 - 145mm cavity125 -150mm inner leaf
100mm outer leaf130 - 145mm cavity125 -150mm inner leaf
225
22.3
28
22
16.2
4350 4800
225
22.3
33
26
16.2
4050 4200
225
18.7
50
39
16.2
2400 2700
225
31.7
40
33
20.6
4050 4200
156
19.8
41
34
12.6
2550 2700
98 124 135
‘h’ n
om
inal
98 124 135
‘h’ n
om
inal
98 124 135
‘h’ n
om
inal
98 124 140
225
98 124 135
150
98 124 135
230
17
© Stressline Limited 2016
CA
VIT
Y 1
50 W
IL
100mm outer leaf150 - 165mm cavity125 -150mm inner leaf
100mm outer leaf150 - 165mm cavity125 -150mm inner leaf
100mm outer leaf150 - 165mm cavity125 -150mm inner leaf
SL150 WIL
SL150 HD WIL
SL150 CXHD 150 WIL
SL150 CXHD 225 WIL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
100mm outer leaf150 - 165mm cavity125 -150mm inner leaf
100mm outer leaf150 - 165mm cavity125 -150mm inner leaf
100mm outer leaf150 - 165mm cavity125 -150mm inner leaf
SL150 HDX WIL
SL150 XHD 225 WIL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
See additional installation requirements on page 12.
See additional installation requirements on page 12.
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Weights (kg/m)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 19:1 (kN)
SWL 5:1 (kN)
RM (kNm)
225 225 225
32.6
66
32.6
51
32.6
41
79
20.6
60
20.6
49
20.6
6002100
22502700
28503300
225
32.6
34
41
20.6
34503900
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
153 185 190
15.1 16.6 16.8
67 58 64
52
8.8
46
9.9
50
13.3
6001200
13501500
16501800
225
18.5
59
46
15.5
19502250
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
236 236 236 236 236 236
24.5 24.5 24.5 24.5 24.5 24.5
6001800
19503000
31503900
40504500
46504800
49505100
89
75
21.5
71
60
21.5
55
46
21.5
42 37 32
40 35 30
20.5 20.5 20.5
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
156 156 156
20.8 20.8 20.8
6001800
19502100
22502400
72 62 53
61
12.6
52
12.6
45
12.6
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
6001200
140 153 190
14.4 15.1 16.8
58 52 41
46 41 32
7.7 8.8 13.3
13501500
16502700
225
18.5
33
26
15.5
28503900
6001200
95 113 134 140 153
12.3 13.1 14.1 14.1 14.4
26 26 31 31 31
20 20 24 24 24
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm) 3.5 4.5 6.4 7.7 8.8
13501500
16501800
19502100
22502400
190
16.8
37
29
13.3
25503000
190
16.8
30
23
13.3
31503600
190
16.8
28
22
13.3
37503900
225
18.5
28
22
16.2
40504200Lintels are available in increments of 150mm
225
23.2
28
22
16.2
4350 4800
225
23.2
33
26
16.2
4050 4200
225
23.2
50
39
16.2
2400 2700
225
32.6
33
40
20.6
4050 4200
156
20.8
2550 2700
41
34
12.6
98 144 135
‘h’ n
om
inal
98 144 135
‘h’ n
om
inal
98 144 135
‘h’ n
om
inal
98 144 135
225
98 144 135
150
98 144 135
230
18
WID
E OU
TER LEAF (W
OL)
APPLICATIONThese lintels are suitable to support a 125-150mm outer leaf of blockwork or stonework.
Standard (WOL) and Heavy Duty (HD WOL & HDX WIL)Designed to support:• Masonry loads• Masonry loads and uniformly distributed timber
floor loads• Uniformly distributed roof loads (in most cases
HD lintel type is required)
Extra Heavy Duty (XHD WOL) and Composite Extra Heavy Duty (CXHD WOL)Designed to support:• Concrete floor loads• Attic truss loads• Point loads: compound trusses, steel beams,
etc
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTESFor general installation notes please refer to page 66.
Additional installation requirements for Composite Extra Heavy Duty (CXHD WOL) • Ensure that the inner leaf channel is filled
with well cured masonry before work proceeds over. Masonry needs to be built tightly against the vertical section of the channel and a mortar joint added to the top of masonry, so that the loads from units above are spread evenly over the inner flange of the lintel.
• Composite lintels should be adequately propped during construction, at maximum 1.2 metre centres. Props should not be removed until the mortar has cured.
ADVANTAGES• Easy to install and suitable for a variety of
applications• Galvanised coating ensures durability/longevity• Built-in plaster key – perforated base plate to
inner flange• Excellent thermal efficiency• Built-in continuous insulation
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable)RM – Resistance Moment (Serviceable)SWL – Safe Working Load
% If in doubt please contact our technical department on
01455 272457
CAVITY WALL WIDE OUTER LEAF (WOL)
© Stressline Limited 2016 19
225
18.7
33
26
16.2
4050 4200
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
© Stressline Limited 2016
125 -150mm outer leaf50 - 65mm cavity100mm inner leaf
125 -150mm outer leaf50 - 65mm cavity100mm inner leaf
125 -150mm outer leaf50 - 65mm cavity100mm inner leaf
CA
VIT
Y 5
0 W
OL
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001800
6001800
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
156
236
156
236
156
236 236 236
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
16.2
19.9
16.2
19.9
16.2
19.9 19.9 19.9
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
140
12.3
58
46
7.7
153
13.0
52
41
8.8
13501500
19502100
19503000
190
14.7
41
32
13.3
16502550
22502400
31503900
40504500
46504800
SL50 WOL
SL50 HD WOL
SL50 CXHD 150 WOL
SL50 CXHD 225 WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
125 -150mm outer leaf50 - 65mm cavity100mm inner leaf
SWL 5:1 (kN)
SWL 5:1 (kN)
72
89
75
21.5
62
71
60
21.5
53
55
46
21.5
42 37
40 35
20.5 20.5
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
45
12.6
SWL 19:1 (kN)
RM (kNm)
125 -150mm outer leaf50 - 65mm cavity100mm inner leaf
125 -150mm outer leaf50 - 65mm cavity100mm inner leaf
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001200
6002100
Nominal Height “h” (mm)
Nominal Height “h” (mm)
153
225
185
225
190 225
225
Weights (kg/m)
Weights (kg/m)
13.0
27.1
14.5
27.1
14.7 16.4
27.1
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
67
79
58
60
64 59
49
SWL 19:1 (kN)
SWL 19:1 (kN)
52
66
46
51
50 46
41
RM (kNm)
RM (kNm)
8.8
20.6
9.9
20.6
13.3 15.5
20.6
13501500
22502700
16501800
1950 2250
28503300
225
27.1
41
34
20.6
34503900
225
27.1
40
33
20.6
40504200
SL50 HDX WOL
SL50 XHD 225 WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
See additional installation requirements on page 19.
See additional installation requirements on page 19.
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
225
18.7
28
22
16.2
4350 4800
6001200
95
10.2
16
12
3.5
113
11.0
17
13
4.5
13501500
134
12.0
22
17
6.4
16501800
140
12.3
23
18
7.7
19502100
153
13.0
24
19
8.8
22502400
190
14.7
28
22
13.3
25503000
190
14.7
28
22
13.3
31503600
190
14.7
28
22
13.3
37503900
225
16.4
28
22
16.2
4050 4200
2700 3000
225
16.4
41
32
15.5
225
16.4
35
27
15.5
3150 3450
225
16.4
33
26
15.5
3600 3900
225
18.7
50
39
16.2
24002700
156
16.2
2550 2700
41
34
12.6
236
19.9
4950 5100
32
30
20.5
135 44 98
135 44 98
135 44 98
135 44 98
135 44 98
135 44 98
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
20
© Stressline Limited 2016
6001200
95
10.4
16
12
3.5
113
11.3
17
13
4.5
13501500
134
12.3
22
17
6.4
16501800
140
12.6
23
18
7.7
19502100
153
13.2
24
19
8.8
22502400
190
15.0
28
22
13.3
25503000
190
15.0
28
22
13.3
31503600
190
15.0
28
22
13.3
37503900
CA
VITY
70 WO
L125 - 150mm outer leaf70 - 85mm cavity100mm inner leaf
125 - 150mm outer leaf70 - 85mm cavity100mm inner leaf
125 - 150mm outer leaf70 - 85mm cavity100mm inner leaf
125 - 150mm outer leaf70 - 85mm cavity100mm inner leaf
SL70 WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm) 236 236 236 236 236
Weights (kg/m)
Weights (kg/m) 20.8 20.8 20.8 20.8 20.8
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
89
75
21.5
71
60
21.5
55
46
21.5
37 37
35 35
20.5 20.5
SWL 19:1 (kN)
RM (kNm)
6001200
140
12.6
58
46
7.7
153
13.2
52
41
8.8
13501500
6001800
190
15.0
41
32
13.3
16502550
19503000
31503900
40504500
46504800
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 156 156
Weights (kg/m) 17.0 17.0
SWL 5:1 (kN) 72 62
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
6001800
19502100
156
17.0
53
45
12.6
22502400
SL70 HD WOL
SL70 CXHD 225 WOL
SL70 CXHD 150 WOL
Suitable to support precast concrete floors,attic trusses, and point loads.
125 - 150mm outer leaf70 - 85mm cavity100mm inner leaf
125 - 150mm outer leaf70 - 85mm cavity100mm inner leaf
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 225 225 225 225
Weights (kg/m)
SWL 19:1 (kN)
27.9
66
27.9
51
27.9
41
27.9
34
SWL 5:1 (kN)
RM (kNm)
79
20.6
60
20.6
49
20.6
41
20.6
6002100
22502700
28503300
34503900
Suitable to support precast concrete floors,attic trusses, and point loads.
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 153 185 190 225
Weights (kg/m) 13.2 14.7 15.0 16.6
SWL 1:1/3:1 (kN) 67 58 64 59
SWL 19:1 (kN)
RM (kNm)
52
8.8
46
9.9
50 46
13.3 15.5
6001200
13501500
16501800
1950 2250
SL70 XHD 225 WOL
SL70 HDX WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
See additional installation requirements on page 19.
See additional installation requirements on page 19.
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
225
27.9
40
33
20.6
40504200
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
225
19.4
28
22
16.2
4350 4800
225
16.6
28
22
16.2
4050 4200
2700 3000
225
16.6
41
32
15.5
225
16.6
35
27
15.5
3150 3450
225
16.6
33
26
15.5
3600 3900
225
19.4
33
26
16.2
40504200
225
19.4
50
39
16.2
2400 2700
156
16.2
41
34
12.6
2550 2700
236
19.9
32
30
20.5
4950 5100
135 64 98
135 64 98
135 64 98
135 64 98
135 64 98
135 64 98
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
21
© Stressline Limited 2016
125 - 150mm outer leaf90 - 105mm cavity100mm inner leaf
125 - 150mm outer leaf90 - 105mm cavity100mm inner leaf
125 - 150mm outer leaf90 - 105mm cavity100mm inner leaf
CA
VIT
Y 9
0 W
OL
SL90 WOL
SL90 HD WOL
SL90 CXHD 150 WOL
SL90 CXHD 225 WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
125 - 150mm outer leaf90 - 105mm cavity100mm inner leaf
125 - 150mm outer leaf90 - 105mm cavity100mm inner leaf
125 - 150mm outer leaf90 - 105mm cavity100mm inner leaf
SL90 HDX WOL
SL90 XHD 225 WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001800
6001800
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
156
236
156
236
156
236 236 236
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
17.9
21.6
17.9
21.6
17.9
21.6 21.6 21.6
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
140
12.9
58
46
7.7
153
13.5
52
41
8.8
13501500
19502100
19503000
190
15.3
41
32
13.3
16502550
22502400
31503900
40504500
46504800
SWL 5:1 (kN)
SWL 5:1 (kN)
72
89
75
21.5
62
71
60
21.5
53
55
46
21.5
42 37
40 35
20.5 20.5
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
45
12.6
SWL 19:1 (kN)
RM (kNm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001200
6002100
Nominal Height “h” (mm)
Nominal Height “h” (mm)
153
225
185
225
190
225
Weights (kg/m)
Weights (kg/m)
13.5
28.7
15.0
28.7
15.3
28.7
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
67
79
58
60
64
49
SWL 19:1 (kN)
SWL 19:1 (kN)
52
66
46
51
50
41
RM (kNm)
RM (kNm)
8.8
20.6
9.9
20.6
13.3
20.6
13501500
22502700
16501800
225
16.9
59
46
15.5
19502250
28503300
225
28.7
41
34
20.6
34503900
225
28.7
40
33
20.6
40504200
See additional installation requirements on page 19.
See additional installation requirements on page 19.
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
6001200
95
10.7
16
12
3.5
113
11.6
17
13
4.5
13501500
134
12.6
22
17
6.4
16501800
140
12.9
23
18
7.7
19502100
153
13.5
24
19
8.8
22502400
190
15.3
28
22
13.3
25503000
190
15.3
28
22
13.3
31503600
190
15.3
28
22
13.3
37503900
225
16.9
28
22
16.2
4050 4200
225
20.2
28
22
16.2
4350 4800
2700 3000
225
16.9
41
32
15.5
225
16.9
35
27
15.5
3150 3450
225
16.9
33
26
15.5
3600 3900
225
20.2
33
26
16.2
4050 4200
225
20.2
50
39
16.2
2400 2700
156
16.2
2550 2700
41
34
12.6
236
19.9
4950 5100
32
30
20.5
135 84 98
‘h’ n
om
inal
135 84 98
‘h’ n
om
inal
135 84 98
‘h’ n
om
inal
135 84 98
225
135 84 98
150
135 84 98
230
22
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
© Stressline Limited 2016
125 - 150mm outer leaf110 - 125mm cavity100mm inner leaf
125 - 150mm outer leaf110 - 125mm cavity100mm inner leaf
125 - 150mm outer leaf110 - 125mm cavity100mm inner leaf
125 - 150mm outer leaf110 - 125mm cavity100mm inner leaf
125 - 150mm outer leaf110 - 125mm cavity100mm inner leaf
125 - 150mm outer leaf110 - 125mm cavity100mm inner leaf
CA
VITY
110 WO
LSL110 WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
SL110 HD WOL
SL110 CXHD 225 WOL
SL110 XHD 225 WOL
SL110 CXHD 150 WOL
SL110 HDX WOL
Suitable to support precast concrete floors,attic trusses, and point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm) 236 236 236 236
Weights (kg/m)
Weights (kg/m) 22.5 22.5 22.5 22.5
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
89
75
21.5
71
60
21.5
55
46
21.5
37
35
20.5
SWL 19:1 (kN)
RM (kNm)
6001200
140
13.7
58
46
7.7
153
14.3
52
41
8.8
13501500
6001800
190
16.1
41
32
13.3
16502550
19503000
31503900
40504500
236
19.9
32
30
20.5
4950 5100
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 156 156
Weights (kg/m) 18.8 18.8
SWL 5:1 (kN) 72 62
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
6001800
19502100
156
18.8
53
45
12.6
22502400
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 225 225 225 225
Weights (kg/m)
SWL 19:1 (kN)
29.7
66
29.7
51
29.7
41
29.7
34
SWL 5:1 (kN)
RM (kNm)
79
20.6
60
20.6
49
20.6
41
20.6
6002100
22502700
28503300
34503900
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 153 185
Weights (kg/m) 14.3 15.8
SWL 1:1/3:1 (kN) 67 58
SWL 19:1 (kN)
RM (kNm)
52
8.8
46
9.9
6001200
13501500
190
16.1
64
50
13.3
16501800
See additional installation requirements on page 19.
See additional installation requirements on page 19.
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
225
29.7
40
33
20.6
40504200
6001200
95
11.5
26
20
3.5
113
12.4
26
20
4.5
13501500
134
13.4
31
24
6.4
16501800
140
13.7
31
24
7.7
19502100
153
14.3
31
24
8.8
22502400
190
16.1
37
29
13.3
2550 3000
190
16.1
30
23
13.3
31503600
190
16.1
28
22
13.3
37503900
225
17.7
28
22
16.2
4050 4200
225
21.5
28
22
16.2
4350 4800
2700 3000
225
17.7
41
32
15.5
225
17.7
35
27
15.5
31503450
225
17.7
33
26
15.5
3600 3900
225
21.5
33
26
16.2
4050 4200
225
17.7
59
46
15.5
1950 2250
225
21.5
50
39
16.2
2400 2700
156
16.2
41
34
12.6
2550 2700
236
22.5
37
35
20.5
46504800
135 104 98
‘h’ n
om
inal
135 104 98
‘h’ n
om
inal
135 104 98
‘h’ n
om
inal
135 104 98
225
135 104 98
150
135 104 98
230
23
© Stressline Limited 2016
CA
VIT
Y 1
30 W
OL
125 - 150mm outer leaf130 - 145mm cavity100mm inner leaf
125 - 150mm outer leaf130 - 145mm cavity100mm inner leaf
125 - 150mm outer leaf130 - 145mm cavity100mm inner leaf
SL130 WOL
SL130 HD WOL
SL130 CXHD 150 WOL
SL130 CXHD 225 WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
125 - 150mm outer leaf130 - 145mm cavity100mm inner leaf
125 - 150mm outer leaf130 - 145mm cavity100mm inner leaf
125 - 150mm outer leaf130 - 145mm cavity100mm inner leaf
SL130 HDX WOL
SL130 XHD 225 WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001800
6001800
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
156
236
156
236 236 236
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
19.7
23.4
19.7
23.4 23.4 23.4
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
140
14.0
58
46
7.7
153
14.6
52
41
8.8
13501500
19502100
19503000
190
16.4
41
32
13.3
16502550
31503900
40504500
SWL 5:1 (kN)
SWL 5:1 (kN)
72
89
75
21.5
62
71
60
21.5
55
46
21.5
42
40
20.5
236
23.4
46504800
37
35
20.5
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
156
19.7
22502400
53
45
12.6
SWL 19:1 (kN)
RM (kNm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001200
6002100
Nominal Height “h” (mm)
Nominal Height “h” (mm)
153
225
185
225
190
225 225
Weights (kg/m)
Weights (kg/m)
14.6
30.6
16.2
30.6
16.4
30.6 30.6
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
67
79
58
60
64
49 41
SWL 19:1 (kN)
SWL 19:1 (kN)
52
66
46
51
50
41 34
RM (kNm)
RM (kNm)
8.8
20.6
9.9
20.6
13.3
20.6 20.6
13501500
22502700
16501800
225
18.1
63
49
15.5
19502250
28503300
34503900
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
225
30.6
40
33
20.6
40504200
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm600
1200
95
11.9
16
12
3.5
113
12.7
17
13
4.5
13501500
134
13.7
22
17
6.4
16501800
140
14.0
23
18
7.7
19502100
153
14.6
24
19
8.8
22502400
190
16.4
28
22
13.3
25503000
190
16.4
28
22
13.3
31503600
190
16.4
28
22
13.3
37503900
225
18.1
28
22
16.2
4050 4200
225
22.3
28
22
16.2
4350 4800
2700 3000
225
18.1
41
32
15.5
225
18.1
35
27
15.5
3150 3450
225
18.1
33
26
15.5
3600 3900
225
22.3
33
26
16.2
4050 4200
225
18.7
50
39
16.2
2400 2700
156
16.2
2550 2700
41
34
12.6
236
19.9
4950 5100
32
30
20.5
135 124 98
‘h’ n
om
inal
135 124 98
‘h’ n
om
inal
135 124 98
‘h’ n
om
inal
135 124 98
225
135 124 98
150
135 124 98
230
24
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
© Stressline Limited 2016
CA
VITY
150 WO
L
125 - 150mm outer leaf150 - 165mm cavity100mm inner leaf
125 - 150mm outer leaf150 - 165mm cavity100mm inner leaf
125 - 150mm outer leaf150 - 165mm cavity100mm inner leaf
SL150 WOL
SL150 HD WOL
SL150 CXHD 150 WOL
SL150 CXHD 225 WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
125 - 150mm outer leaf150 - 165mm cavity100mm inner leaf
125 - 150mm outer leaf150 - 165mm cavity100mm inner leaf
125 - 150mm outer leaf150 - 165mm cavity100mm inner leaf
SL150 HDX WOL
SL150 XHD 225 WOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
6001200
95
12.3
16
12
3.5
113
13.1
17
13
4.5
13501500
134
14.1
22
17
6.4
16501800
140
14.4
23
18
7.7
19502100
153
15.1
24
19
8.8
22502400
190
16.8
28
22
13.3
25503000
190
16.8
28
22
13.3
31503600
190
16.8
28
22
13.3
37503900
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm) 236 236 236 236
Weights (kg/m)
Weights (kg/m) 24.3 24.3 24.3 24.3
SWL 1:1/3:1 (kN)
SWL 5:1 (kN)
SWL 19:1 (kN)
RM (kNm)
89
75
21.5
71
60
21.5
55
46
21.5
42
40
20.5
SWL 19:1 (kN)
RM (kNm)
6001200
140
14.4
58
46
7.7
153
15.1
52
41
8.8
13501500
6001800
190
16.8
41
32
13.3
16502550
19503000
31503900
40504500
236
24.3
37
35
20.5
46504800
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 156 156
Weights (kg/m) 20.6 20.6
SWL 5:1 (kN) 72 62
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
6001800
19502100
156
20.6
53
45
12.6
22502400
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 225 225 225 225
Weights (kg/m)
SWL 19:1 (kN)
31.5
66
31.5
51
31.5
41
31.5
34
SWL 5:1 (kN)
RM (kNm)
79
20.6
60
20.6
49
20.6
41
20.6
6002100
22502700
28503300
34503900
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 153 185 190
Weights (kg/m) 15.1 16.6 18.5
SWL 1:1/3:1 (kN) 67 58 64
SWL 19:1 (kN)
RM (kNm)
52
8.8
46
9.9
50
13.3
6001200
13501500
16501800
225
18.5
59
46
15.5
1950 2250
See additional installation requirements on page 19.
See additional installation requirements on page 19.
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
225
31.5
40
33
20.6
40504200
225
18.5
28
22
16.2
4050 4200
225
23.2
28
22
16.2
4350 4800
27003000
225
18.5
41
32
15.5
225
18.5
35
27
15.5
31503450
225
18.5
33
26
15.5
36003900
225
23.2
33
26
16.2
40504200
225
23.2
50
39
16.2
2400 2700
156
16.2
41
34
12.6
2550 2700
236
19.9
32
30
20.5
4950 5100
135 144 98
‘h’ n
om
inal
135 144 98
‘h’ n
om
inal
135 144 98
‘h’ n
om
inal
135 144 98
225
135 144 98
150
135 144 98
230
25
SHO
RT O
UTE
R LE
AF
(SO
L)
APPLICATIONThese lintels are suitable to support a 75mm outer leaf of cant brick or 100mm wide decorative head detail. Lintels are available in all profiles for a variety of cavity wall constructions from 50mm to 150mm; please ask our sales office for availability and prices for specific applications.
Standard (SOL) and Heavy Duty (HD SOL & HDX SOL)These lintels are designed to support:• Masonry loads• Masonry loads and uniformly distributed timber
floor loads• Uniformly distributed roof loads (in most cases
HD lintel type is required)
Extra Heavy Duty (XHD SOL) and Composite Extra Heavy Duty (CXHD SOL)These lintels are designed to support:• Concrete floor loads• Attic truss loads• Point loads: compound trusses, steel beams,
etc.
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTESFor general installation notes please refer to page 66.
Additional installation requirements for Composite Extra Heavy Duty (CXHD SOL) • Ensure that the inner leaf channel
is filled with well cured masonry before work proceeds over. Masonry needs to be built tightly against the vertical section of the channel and a mortar joint added to the top of masonry, so that the loads from units above are spread evenly over the inner flange of the lintel.
• Composite lintels should be adequately propped during construction, at maximum 1.2 metre centres. Props should not be removed until the mortar has cured.
ADVANTAGES:• Easy to install • Galvanised coating ensures durability/longevity• Built-in plaster key – perforated base plate to
inner flange• Excellent thermal efficiency• Built-in continuous insulation
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable)RM – Resistance Moment (Serviceable)SWL – Safe Working Load
% If in doubt please contact our technical department on
01455 272457
CAVITY WALL SHORT OUTER LEAF (SOL)
© Stressline Limited 2016 26
© Stressline Limited 2016
CA
VITY
50 SOL
75 - 100mm outer leaf50 - 65mm cavity 100mm inner leaf
75 - 100mm outer leaf50 - 65mm cavity 100mm inner leaf
75 - 100mm outer leaf50 - 65mm cavity 100mm inner leaf
SL50 SOL
SL50 HD SOL
SL50 CXHD 150 SOL
SL50 CXHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
75 - 100mm outer leaf50 - 65mm cavity 100mm inner leaf
75 - 100mm outer leaf50 - 65mm cavity 100mm inner leaf
75 - 100mm outer leaf50 - 65mm cavity 100mm inner leaf
SL50 HDX SOL
SL50 XHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 236 236 236 236 236
Weights (kg/m) 28.1 28.1 28.1 28.1 28.1
SWL 5:1 (kN) 89 71 55 42 37
SWL 19:1 (kN) 75 60 46 40 35
RM (kNm) 21.5 21.5 21.5 20.5 20.5
19503000
31503900
40504500
46504800Lintels are available in increments of 150mm
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
140
10.9
42
33
7.7
153
11.5
40
31
8.8
13501500
190
13.3
41
32
13.3
16502100
190
13.3
41
32
15.5
2250 2700Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 153 185 190
Weights (kg/m) 11.5 13.0 13.3
SWL 1:1/3:1 (kN) 51 53 64
SWL 19:1 (kN) 40 41 50
RM (kNm) 6.8 9.0 13.3
13501500
16501800
225
15.0
59
46
15.5
1950 2250Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6002100
Nominal Height “h” (mm) 225 225 225 225
Weights (kg/m) 25.2 25.2 25.2 25.2
SWL 5:1 (kN) 79 60 49 41
SWL 19:1 (kN) 66 51 41 34
RM (kNm) 20.6 20.6 20.6 20.6
22502700
28503300
34503900Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 156 156 156
Weights (kg/m) 14.3 14.3 14.3
19502100
22502400
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
45
12.6
SWL 5:1 (kN) 72 62 53
Lintels are available in increments of 150mm
2850 3150
225
15.0
41
32
7.7
225
15.0
35
27
8.8
3300 3600
225
15.0
33
26
13.3
3750 3900
225
17.3
33
26
15.5
4050 4200
225
17.3
50
39
16.2
2400 2700
225
25.2
40
33
20.6
4050 4200
156
14.3
2550 2700
34
12.6
41
236
18.1
32
30
20.5
4950 5100
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm6001200
95
8.8
16
12
3.5
113
9.6
17
13
4.5
13501500
134
10.6
22
17
6.4
16501800
140
10.9
23
18
7.7
19502100
153
11.5
24
19
8.8
22502400
190
13.3
28
22
13.3
25503000
190
13.3
28
22
13.3
31503600
190
13.3
28
22
13.3
37503900
225
15.0
28
22
13.3
4050 4200
225
17.3
28
22
13.3
4350 4800
78 44 98
78 44 98
78 44 98
78 44 98
78 44 98
78 44 98
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
27
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
© Stressline Limited 2016
CA
VIT
Y 7
0 SO
L
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 236 236 236 236
Weights (kg/m) 18.9 18.9 18.9 18.9
SWL 5:1 (kN) 89 71 55 42
SWL 19:1 (kN) 75 60 46 40
RM (kNm) 21.5 21.5 21.5 20.5
19503000
31503900
40504500
236
18.9
37
35
20.5
46504800Lintels are available in increments of 150mm
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
140
11.1
42
33
5.6
153
11.8
40
31
6.8
13501500
190
13.5
41
32
10.0
16502100
190
13.5
41
32
13.3
2250 2700Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 153 185 190
Weights (kg/m) 11.8 13.3 13.5
SWL 1:1/3:1 (kN) 51 53 64
SWL 19:1 (kN) 40 41 50
RM (kNm) 6.8 9.0 13.3
13501500
16501800
225
15.2
59
46
15.5
19502250Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6002100
Nominal Height “h” (mm) 225 225 225 225
Weights (kg/m) 26.0 26.0 26.0 26.0
SWL 5:1 (kN) 79 60 49 41
SWL 19:1 (kN) 66 51 41 34
RM (kNm) 20.6 20.6 20.6 20.6
22502700
28503300
34503900Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 156 156 156
Weights (kg/m) 15.2 15.2 15.2
19502100
22502400
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
45
12.6
SWL 5:1 (kN) 72 62 53
Lintels are available in increments of 150mm
6001200
95
9.3
16
12
3.5
113
10.2
17
13
4.5
13501500
134
11.2
22
17
6.4
16501800
140
11.5
23
18
7.7
19502100
153
12.1
24
19
8.8
22502400
190
13.8
28
22
13.3
2550 3000
190
13.8
28
22
13.3
31503600
190
13.8
28
22
13.3
37503900
75 - 100mm outer leaf70 - 85mm cavity 100mm inner leaf
75 - 100mm outer leaf70 - 85mm cavity 100mm inner leaf
75 - 100mm outer leaf70 - 85mm cavity 100mm inner leaf
SL70 SOL
SL70 HD SOL
SL70 CXHD 150 SOL
SL70 CXHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
75 - 100mm outer leaf70 - 85mm cavity 100mm inner leaf
75 - 100mm outer leaf70 - 85mm cavity 100mm inner leaf
75 - 100mm outer leaf70 - 85mm cavity 100mm inner leaf
SL70 HDX SOL
SL70 XHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
225
15.2
28
22
13.3
4050 4200
225
18.0
28
22
13.3
4350 4800
2850 3150
225
15.2
41
32
15.5
225
15.2
35
27
15.5
3300 3600
225
15.2
33
26
15.5
3750 3900
225
18.0
33
26
16.2
4050 4200
225
18.0
50
39
16.2
2400 2700
225
25.2
40
33
20.6
4050 4200
156
14.3
2550 2700
34
12.6
41
236
18.1
32
30
20.5
4950 5100
78 64 98
78 64 98
78 64 98
78 64 98
78 64 98
78 64 98
‘h’ n
om
inal
‘h’ n
om
inal
‘h’ n
om
inal
225
150
230
28
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
© Stressline Limited 2016
CA
VITY
90 SOL
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 156 156
Weights (kg/m) 16.0 16.0
19502100
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
SWL 5:1 (kN) 72 62
156
16.0
22502400
45
12.6
53
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 236 236 236 236 236
Weights (kg/m) 19.8 19.8 19.8 19.8 19.8
SWL 5:1 (kN) 89 71 55 42 37
SWL 19:1 (kN) 75 60 46 40 35
RM (kNm) 21.5 21.5 21.5 20.5 20.5
19503000
31503900
40504500
46504800Lintels are available in increments of 150mm
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
140
11.9
42
33
5.6
153
12.1
40
31
6.8
13501500
190
13.8
41
32
10.0
16502100
190
13.8
41
32
13.3
22502700Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 153 185 190
Weights (kg/m) 12.5 14.0 14.3
SWL 1:1/3:1 (kN) 51 53 64
SWL 19:1 (kN) 40 41 50
RM (kNm) 6.8 9.0 13.3
13501500
16501800
225
15.5
59
46
15.5
19502250Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6002100
Nominal Height “h” (mm) 225 225 225
Weights (kg/m) 26.9 26.9 26.9
SWL 5:1 (kN) 79 60 49
SWL 19:1 (kN) 66 51 41
RM (kNm) 20.6 20.6 20.6
22502700
28503300
225
26.9
41
34
20.6
34503900Lintels are available in increments of 150mm
6001200
95
9.7
16
12
3.5
113
10.6
17
13
4.5
13501500
134
11.6
22
17
6.4
16501800
140
11.9
23
18
7.7
19502100
153
12.5
24
19
8.8
22502400
190
14.3
28
22
13.3
25503000
190
14.3
28
22
13.3
31503600
190
14.3
28
22
13.3
37503900
75 - 100mm outer leaf90 - 105mm cavity 100mm inner leaf
75 - 100mm outer leaf90 - 105mm cavity 100mm inner leaf
75 - 100mm outer leaf90 - 105mm cavity 100mm inner leaf
SL90 SOL
SL90 HD SOL
SL90 CXHD 150 SOL
SL90 CXHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
75 - 100mm outer leaf90 - 105mm cavity 100mm inner leaf
75 - 100mm outer leaf90 - 105mm cavity 100mm inner leaf
75 - 100mm outer leaf90 - 105mm cavity 100mm inner leaf
SL90 HDX SOL
SL90 XHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
225
15.5
28
22
13.3
4050 4200
225
18.8
28
22
13.3
4350 4800
2850 3150
225
15.5
41
32
15.5
225
15.5
35
27
15.5
3300 3600
225
15.5
33
26
15.5
3750 3900
225
18.8
33
26
16.2
4050 4200
225
18.8
50
39
16.2
2400 2700
225
25.2
40
33
20.6
4050 4200
156
14.3
2550 2700
34
12.6
41
236
18.1
32
30
20.5
4950 5100
78 84 98
‘h’ n
om
inal
78 84 98
‘h’ n
om
inal
78 84 98
‘h’ n
om
inal
78 84 98
225
78 84 98
150
78 84 98
230
29
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
© Stressline Limited 2016
CA
VIT
Y 1
10 S
OL
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 236 236 236 236 236
Weights (kg/m) 20.7 20.7 20.7 20.7 20.7
SWL 5:1 (kN) 89 71 55 42 37
SWL 19:1 (kN) 75 60 46 40 35
RM (kNm) 21.5 21.5 21.5 20.5 20.5
19503000
31503900
40504500
46504800Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6002100
Nominal Height “h” (mm) 225 225 225
Weights (kg/m) 27.8 27.8 27.8
SWL 5:1 (kN) 79 60 49
SWL 19:1 (kN) 66 51 41
RM (kNm) 20.6 20.6 20.6
22502700
28503300
225
27.8
41
34
20.6
34503900Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 156 156
Weights (kg/m) 16.9 16.9
19502100
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
SWL 5:1 (kN) 72 62
156
14.3
2550 2700
34
12.6
41
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
140
12.3
42
33
5.6
153
12.9
40
31
6.8
13501500
190
14.6
41
32
10.0
16502100
190
14.6
41
32
13.3
2250 2700Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 153 185 190 225
Weights (kg/m) 12.9 14.4 14.6 16.3
SWL 1:1/3:1 (kN) 51 53 64 59
SWL 19:1 (kN) 40 41 50 46
RM (kNm) 6.8 9.0 13.3 15.5
13501500
16501800
19502250Lintels are available in increments of 150mm
6001200
95
10.1
16
12
3.5
113
11.0
17
13
4.5
13501500
134
12.0
22
17
6.4
16501800
140
12.3
23
18
7.7
19502100
153
12.9
24
19
8.8
22502400
190
14.6
28
22
13.3
25503000
190
14.6
28
22
13.3
31503600
190
14.6
28
22
13.3
37503900
75 - 100mm outer leaf110 - 125mm cavity 100mm inner leaf
75 - 100mm outer leaf110 - 125mm cavity 100mm inner leaf
75 - 100mm outer leaf110 - 125mm cavity 100mm inner leaf
SL110 SOL
SL110 HD SOL
SL110 CXHD 150 SOL
SL110 CXHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
75 - 100mm outer leaf110 - 125mm cavity 100mm inner leaf
75 - 100mm outer leaf110 - 125mm cavity 100mm inner leaf
75 - 100mm outer leaf110 - 125mm cavity 100mm inner leaf
SL110 HDX SOL
SL110 XHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
225
16.3
28
22
13.3
4050 4200
225
20.1
28
22
13.3
4350 4800
2850 3150
225
16.3
41
32
15.5
225
16.3
35
27
15.5
3300 3600
225
16.3
33
26
15.5
3750 3900
225
20.1
33
26
16.2
4050 4200
225
20.1
50
39
16.2
2400 2700
225
25.2
40
33
20.6
4050 4200
156
16.9
22502400
45
12.6
53
236
18.1
32
30
20.5
4950 5100
78 104 98
‘h’ n
om
inal
78 104 98
‘h’ n
om
inal
78 104 98
‘h’ n
om
inal
78 104 98
225
150
78 104 98
230
78 104 98
30
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
© Stressline Limited 2016
CA
VITY
130 SOL
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 236 236 236 236
Weights (kg/m) 21.6 21.6 21.6 21.6
SWL 5:1 (kN) 89 71 55 42
SWL 19:1 (kN) 75 60 46 40
RM (kNm) 21.5 21.5 21.5 20.5
19503000
31503900
40504500
236
21.6
37
35
20.5
46504800Lintels are available in increments of 150mm
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6002100
140
12.6
42
33
5.6
153
13.2
40
31
6.8
13501500
190
15.0
41
32
10.0
1650 2100
190
15.0
41
32
13.3
2250 2700Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 153 185 190
Weights (kg/m) 13.2 14.7 15.0
SWL 1:1/3:1 (kN) 51 53 64
SWL 19:1 (kN) 40 41 50
RM (kNm) 6.8 9.0 13.3
13501500
16501800
225
16.7
59
46
15.5
1950 2250Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6002100
Nominal Height “h” (mm) 225 225 225
Weights (kg/m) 28.7 28.7 28.7
SWL 5:1 (kN) 79 60 49
SWL 19:1 (kN) 66 51 41
RM (kNm) 20.6 20.6 20.6
22502700
28503300
225
28.7
41
34
20.6
34503900Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 156 156
Weights (kg/m) 17.8 17.8
19502100
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
SWL 5:1 (kN) 72 62
156
17.8
22502400
45
12.6
53
Lintels are available in increments of 150mm
6001200
95
10.4
16
12
3.5
113
11.3
17
13
4.5
13501500
134
12.3
22
17
6.4
16501800
140
12.6
23
18
7.7
19502100
153
13.2
24
19
8.8
22502400
190
15.0
28
22
13.3
2550 3000
190
15.0
28
22
13.3
31503600
190
15.0
28
22
13.3
37503900
75 - 100mm outer leaf130 - 145mm cavity100mm inner leaf
75 - 100mm outer leaf130 - 145mm cavity100mm inner leaf
75 - 100mm outer leaf130 - 145mm cavity100mm inner leaf
SL130 SOL
SL130 HD SOL
SL130 CXHD 150 SOL
SL130 CXHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
75 - 100mm outer leaf130 - 145mm cavity100mm inner leaf
75 - 100mm outer leaf130 - 145mm cavity100mm inner leaf
75 - 100mm outer leaf130 - 145mm cavity100mm inner leaf
SL130 HDX SOL
SL130 XHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
225
16.7
28
22
13.3
4050 4200
225
20.9
28
22
13.3
4350 4800
2850 3150
225
16.7
41
32
15.5
225
16.7
35
27
15.5
3300 3600
225
16.7
33
26
15.5
3750 3900
225
20.9
33
26
16.2
4050 4200
225
20.9
50
39
16.2
2400 2700
225
25.2
40
33
20.6
4050 4200
156
14.3
2550 2700
34
12.6
41
236
18.1
32
30
20.5
4950 5100
78 124 98
‘h’ n
om
inal
78 124 98
‘h’ n
om
inal
78 124 98
‘h’ n
om
inal
78 124 98
225
78 124 98
150
78 124 98
230
31
© Stressline Limited 2016
CA
VIT
Y 1
50 S
OL
See additional installation requirements on page 26.
See additional installation requirements on page 26.
75 - 100mm outer leaf150 - 165mm cavity100mm inner leaf
75 - 100mm outer leaf150 - 165mm cavity100mm inner leaf
75 - 100mm outer leaf150 - 165mm cavity100mm inner leaf
SL150 SOL
SL150 HD SOL
SL150 CXHD 150 SOL
SL150 CXHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
75 - 100mm outer leaf150 - 165mm cavity100mm inner leaf
75 - 100mm outer leaf150 - 165mm cavity100mm inner leaf
75 - 100mm outer leaf150 - 165mm cavity100mm inner leaf
SL150 HDX SOL
SL150 XHD 225 SOL
Not suitable to support precast concrete floors, attic trusses, heavy point loads.
Suitable to support precast concrete floors,attic trusses, and point loads.
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 236 236 236 236 236
Weights (kg/m) 22.5 22.5 22.5 22.5 22.5
SWL 5:1 (kN) 89 71 55 42 37
SWL 19:1 (kN) 75 60 46 40 35
RM (kNm) 21.5 21.5 21.5 20.5 20.5
19503000
31503900
40504500
46504800Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6002100
Nominal Height “h” (mm) 225 225 225
Weights (kg/m) 29.6 29.6 29.6
SWL 5:1 (kN) 79 60 49
SWL 19:1 (kN) 66 51 41
RM (kNm) 20.6 20.6 20.6
22502700
28503300
225
29.6
41
34
20.6
34503900Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 156 156
Weights (kg/m) 18.8 18.8
19502100
SWL 19:1 (kN)
RM (kNm)
61
12.6
52
12.6
SWL 5:1 (kN) 72 62
156
14.3
2550 2700
34
12.6
41
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Weights (kg/m)
SWL 1:1/3:1 (kN)
SWL 19:1 (kN)
RM (kNm)
6001200
140
13.0
42
33
5.6
153
13.6
40
31
6.8
13501500
190
15.4
41
32
10.0
16502100
190
15.4
41
32
13.3
2250 2700Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 153 185 190 225
Weights (kg/m) 13.6 15.1 15.4 17.1
SWL 1:1/3:1 (kN) 51 53 64 59
SWL 19:1 (kN) 40 41 50 46
RM (kNm) 6.8 9.0 13.3 15.5
13501500
16501800
19502250Lintels are available in increments of 150mm
6001200
95
10.9
16
12
3.5
113
11.7
17
13
4.5
13501500
134
12.7
22
17
6.4
16501800
140
13.0
23
18
7.7
19502100
153
13.6
24
19
8.8
22502400
190
15.1
28
22
13.3
25503000
190
15.4
28
22
13.3
31503600
190
15.4
28
22
13.3
37503900
225
17.1
28
22
13.3
4050 4200
225
21.8
28
22
13.3
4350 4800
2850 3150
225
17.1
41
32
15.5
225
17.1
35
27
15.5
3300 3600
225
17.1
33
26
15.5
3750 3900
225
21.8
33
26
16.2
4050 4200
225
21.8
50
39
16.2
2400 2700
225
25.2
40
33
20.6
4050 4200
156
18.8
22502400
45
12.6
53
236
18.1
32
30
20.5
4950 5100
78 144 98
‘h’ n
om
inal
78 144 98
‘h’ n
om
inal
78 144 98
‘h’ n
om
inal
78 144 98
225
78 144 98
150
78 144 98
230
32
ROLLED
STEEL SECTIO
NS
APPLICATION Rolled Steel (RS) and Rolled Steel Channel (RSC) fabricated lintels are designed for extreme loading conditions:• Masonry loads• Concrete floor loads• Attic truss loads• Point loads: compound trusses, steel beams, etc
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTES For general installation notes please refer to page 66.
Additional installation requirements for RS and RSC type lintels • Lintels must be laterally restrained and
adequately propped during construction at maximum 1.2 metre centres. Props should not be removed until the mortar has cured.
• Minimum of 200mm bearing is required• RSC type lintels - channel MUST be filled with
masonry before the work proceeds over and needs to be built tightly against the vertical section of the channel using good quality, well bonded mortar joints.
MATERIAL Lintels are manufactured using 203x133x30kg/m UB or 230x90x32.2kg/m RSC with a 6mm welded bottom plate to BS EN 10025 – 2: 2004 of steel grade S275.
FINISHINGLintels are coated as standard in a red-oxide paint. However, they can be supplied, at extra cost, with a galvanised finish.
ADVANTAGES• Available in 50mm increments with a maximum
length of 6600mm• Can suit a variety of cavity wall constructions
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable)RM – Resistance Moment (Serviceable)SWL – Safe Working Load
ROLLED STEEL SECTIONS
% If in doubt please contact our technical department on
01455 272457
© Stressline Limited 2016 33
© Stressline Limited 2016
STANDARD LENGTHS (mm) 9004800
Nominal Height “h” (mm) 213 213 213 213 213 213 213
Weights (kg/m) 41.3 41.3 41.3 41.3 41.3 41.3 41.3
SWL 5:1/19:1 (kN) 82 77 72 67 64 60 58
RM (kNm) 50.0 50.0 50.0 50.0 50.0 50.0 50.0
5100 5400 5700 6000 6300 6600Lintels are available in increments of 50mm
STANDARD LENGTHS (mm) 9004800
Nominal Height “h” (mm) 213 213 213 213 213 213 213
Weights (kg/m) 42.2 42.2 42.2 42.2 42.2 42.2 42.2
SWL 5:1/19:1 (kN) 82 77 72 67 64 60 58
RM (kNm) 50.0 50.0 50.0 50.0 50.0 50.0 50.0
5100 5400 5700 6000 6300 6600Lintels are available in increments of 50mm
STANDARD LENGTHS (mm) 9004800
Nominal Height “h” (mm) 213 213 213 213 213 213 213
Weights (kg/m) 43.2 43.2 43.2 43.2 43.2 43.2 43.2
SWL 5:1/19:1 (kN) 82 77 72 67 64 60 58
RM (kNm) 50.0 50.0 50.0 50.0 50.0 50.0 50.0
5100 5400 5700 6000 6300 6600Lintels are available in increments of 50mm
STANDARD LENGTHS (mm) 9004800
Nominal Height “h” (mm) 213 213 213 213 213 213 213
Weights (kg/m) 44.1 44.1 44.1 44.1 44.1 44.1 44.1
SWL 5:1/19:1 (kN) 82 77 72 67 64 60 58
RM (kNm) 50.0 50.0 50.0 50.0 50.0 50.0 50.0
5100 5400 5700 6000 6300 6600Lintels are available in increments of 50mm
See additional installation requirements on page 33.
See additional installation requirements on page 33.
See additional installation requirements on page 33.
See additional installation requirements on page 33.
ROLL
ED S
TEEL
SEC
TIO
NS
100mm outer leaf70 - 85mm cavity100 -115mm inner leaf
100mm outer leaf90 - 100mm cavity100 -115mm inner leaf
100mm outer leaf110 - 125mm cavity100 -115mm inner leaf
100mm outer leaf50 - 65mm cavity100 -115mm inner leaf
SL50/RS
SL70/RS
SL90/RS
SL110/RS
240
213
265
213
290
213
310
213
See additional installation requirements on page 33.
STANDARD LENGTHS (mm) 9004800
Nominal Height “h” (mm) 213 213 213 213 213 213 213
Weights (kg/m) 45.1 45.1 45.1 45.1 45.1 45.1 45.1
SWL 5:1/19:1 (kN) 82 77 72 67 64 60 58
RM (kNm) 50.0 50.0 50.0 50.0 50.0 50.0 50.0
5100 5400 5700 6000 6300 6600
100mm outer leaf130 - 145mm cavity100 -115mm inner leaf
SL130/RS
330
213
Lintels are available in increments of 50mm
See additional installation requirements on page 33.
STANDARD LENGTHS (mm) 9004800
Nominal Height “h” (mm) 213 213 213 213 213 213 213
Weights (kg/m) 46.0 46.0 46.0 46.0 46.0 46.0 46.0
SWL 5:1/19:1 (kN) 82 77 72 67 64 60 58
RM (kNm) 50.0 50.0 50.0 50.0 50.0 50.0 50.0
5100 5400 5700 6000 6300 6600
100mm outer leaf150 - 165mm cavity100 -115mm inner leaf
SL150/RS
350
213
Lintels are available in increments of 50mm
34
© Stressline Limited 2016
ROLLED
STEEL SECTIO
NS
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
9004800
9004800
9004800
9004800
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
44.0
44.9
45.9
46.8
44.0
44.9
45.9
46.8
44.0
44.9
45.9
46.8
44.0
44.9
45.9
46.8
44.0
44.9
45.9
46.8
44.0
44.9
45.9
46.8
44.0
44.9
45.9
46.8
SWL 5:1/19:1 (kN)
SWL 5:1/19:1 (kN)
SWL 5:1/19:1 (kN)
SWL 5:1/19:1 (kN)
95
95
95
95
90
90
90
90
85
85
85
85
80
80
80
80
76
76
76
76
72
72
72
72
69
69
69
69
RM (kNm)
RM (kNm)
RM (kNm)
RM (kNm)
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
55.7
5100
5100
5100
5100
5400
5400
5400
5400
5700
5700
5700
5700
6000
6000
6000
6000
6300
6300
6300
6300
6600
6600
6600
6600
SL50/RSC
SL70/RSC
SL90/RSC
SL110/RSC
240
230
265
230
285
230
30523
0
See additional installation requirements on page 33.
See additional installation requirements on page 33.
See additional installation requirements on page 33.
See additional installation requirements on page 33.
100mm outer leaf70 - 85mm cavity100 -115mm inner leaf
100mm outer leaf90 - 100mm cavity100 -115mm inner leaf
100mm outer leaf110 - 125mm cavity100 -115mm inner leaf
100mm outer leaf50 - 65mm cavity100 -115mm inner leaf
Lintels are available in increments of 50mm
Lintels are available in increments of 50mm
Lintels are available in increments of 50mm
Lintels are available in increments of 50mm
STANDARD LENGTHS (mm) 9004800
Nominal Height “h” (mm) 236 236 236 236 236 236 236
Weights (kg/m) 47.8 47.8 47.8 47.8 47.8 47.8 47.8
SWL 5:1/19:1 (kN) 95 90 85 80 76 72 69
RM (kNm) 55.7 55.7 55.7 55.7 55.7 55.7 55.7
5100 5400 5700 6000 6300 6600 SL130/RSC
325
230
See additional installation requirements on page 33. 100mm outer leaf130 - 145mm cavity100 -115mm inner leaf
Lintels are available in increments of 50mm
STANDARD LENGTHS (mm) 9004800
Nominal Height “h” (mm) 236 236 236 236 236 236 236
Weights (kg/m) 48.7 48.7 48.7 48.7 48.7 48.7 48.7
SWL 5:1/19:1 (kN) 95 90 85 80 76 72 69
RM (kNm) 55.7 55.7 55.7 55.7 55.7 55.7 55.7
5100 5400 5700 6000 6300 6600 SL150/RSC
345
230
See additional installation requirements on page 33. 100mm outer leaf150 - 165mm cavity100 -115mm inner leaf
Lintels are available in increments of 50mm
35
© Stressline Limited 2016
CLO
SED
EA
VES
APPLICATION Open Back Lintel (E)Designed to support:• Standard truss roof loads
Heavy Duty Box Section Lintel (E HD and E XHD)Designed to support:• Attic trusses• Compound trusses
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTESFor general installation notes please refer to page 66.
Open Back Eaves Lintels must be built in with a course of blockwork positioned tightly against the up-stand of the lintel and a continuous timber wall plate as shown in the illustration.
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable)RM – Resistance Moment (Serviceable)SWL – Safe Working Load
ADVANTAGES• Available in 150mm increments• The curtain brackets on Open Back Eaves
Lintels can be easily fixed without the need of timber battens
• Loads on eaves HD and HDX type lintels can be applied directly to the box section, without the aid of another course of blockwork
• Can suit a variety of cavity wall constructions• Built-in plaster key – perforated base plate to
inner flange• Excellent thermal efficiency provided by the
continuous insulation
CLOSED EAVES
% If in doubt please contact our technical department on
01455 272457
36
© Stressline Limited 2016
CLO
SED EA
VES 50
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001500
6001500
Nominal Height “h” (mm)
Nominal Height “h” (mm)
150
150
150
150
150
150
150
150
150
150
Weights (kg/m)
Weights (kg/m)
9.9
10.7
9.9
10.7
9.9
10.7
9.9
10.7
9.9
10.7
SWL 19:1 kN
SWL 19:1 kN
46
46
38
38
32
32
28
28
24
24
RM (kNm)
RM (kNm)
7.8
7.8
7.8
7.8
7.8
7.8
7.8
7.8
7.8
7.8
16501800
16501800
19502100
19502100
22502400
22502400
25502700
25502700
SL50/E HD
SL50/E WIL
SL50/E HD WIL
SL50/E XHD WIL
SL50/E XHD
SL50/E
50 44 98
153
104 96
150
104 96
150
50 44 13515
3
104 125
150
104 125
150
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001500
Nominal Height “h” (mm) 150 150 150 150 150 150
Weights (kg/m) 14.8 14.8 14.8 14.8 14.8 14.8
SWL 19:1 kN 54 45 38 33 29 26
RM (kNm) 9.2 9.2 9.2 9.2 9.2 9.2
16501800
19502100
22502400
25502700
28503000Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 153 153 153 153 153 153
Weights (kg/m) 7.8 11.6 11.6 11.6 11.6 11.6
SWL 19:1 kN 27 25 18 20 17 15
RM (kNm) 3.6 4.8 4.8 4.8 4.8 4.8
13501500
16501800
19502100
22502400
25502700Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001500
Nominal Height “h” (mm) 150 150 150 150 150 150
Weights (kg/m) 16.2 16.2 16.2 16.2 16.2 16.2
SWL 19:1 kN 54 45 38 33 29 26
RM (kNm) 9.2 9.2 9.2 9.2 9.2 9.2
16501800
19502100
22502400
25502700
28503000Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 153 153
Weights (kg/m) 7.2 10.7
SWL 19:1 kN 27 25
RM (kNm) 3.6 4.8
13501650
153 153 153
10.7 10.7 10.7
20 17 15
4.8 4.8 4.8
18002100
22502400
25502700Lintels are available in increments of 150mm
50 - 80mm cavity100 -115mm inner leaf
50 - 80mm cavity100 -115mm inner leaf
50 - 80mm cavity100 -115mm inner leaf
50 - 80mm cavity125 -150 inner leaf
50 - 80mm cavity125 -150 inner leaf
50 - 80mm cavity125 -150 inner leaf
37
© Stressline Limited 2016
CLO
SED
EA
VES
90
STANDARD LENGTHS (mm) 6001500
Nominal Height “h” (mm) 150 150 150 150 150 150
Weights (kg/m) 15.6 15.6 15.6 15.6 15.6 15.6
SWL (kN) 54 45 38 33 29 26
RM (kNm) 9.2 9.2 9.2 9.2 9.2 9.2
16501800
19502100
22502400
25502700
28503000
STANDARD LENGTHS (mm) 6001500
Nominal Height “h” (mm) 150 150 150 150 150 150
Weights (kg/m) 17.0 17.0 17.0 17.0 17.0 17.0
SWL (kN) 54 45 38 33 29 26
RM (kNm) 9.2 9.2 9.2 9.2 9.2 9.2
16501800
19502100
22502400
25502700
28503000
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001500
6001200
6001500
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
150
153
150
150
153
150
150
153
150
150
153
150
150
153 153
150
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
10.5
8.1
11.3
10.5
12.0
11.3
10.5
12.0
11.3
10.5
12.0
11.3
10.5
12.0 12.0
11.3
SWL (kN)
SWL (kN)
SWL (kN)
46
27
46
38
25
38
32
18
32
28
20
28
24
17 15
24
RM (kNm)
RM (kNm)
RM (kNm)
7.8
3.6
7.8
7.8
4.8
7.8
7.8
4.8
7.8
7.8
4.8
7.8
7.8
4.8 4.8
7.8
16501800
13501500
16501800
19502100
16501800
19502100
22502400
19502100
22502400
25502700
22502400
25502700
25502700
SL90/E HD
SL90/E WIL
SL90/E HD WIL
SL90/E XHD
SL90/E XHD WIL
138 96
150
50 84 135
153
138 125
150
138 96
150
138 125
150
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
SL90/E
50 84 98
153
90 - 120mm cavity100 -115mm inner leaf
90 - 120mm cavity100 -115mm inner leaf
90 - 120mm cavity100 -115mm inner leaf
90 - 120mm cavity125 -150 inner leaf
90 - 120mm cavity125 -150 inner leaf
90 - 120mm cavity125 -150 inner leaf
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 153 153
Weights (kg/m) 7.5 11.1
SWL (kN) 27 25
RM (kNm) 3.6 4.8
13501650
153 153 153
11.1 11.1 11.1
20 17 15
4.8 4.8 4.8
18002100
22502400
25502700Lintels are available in increments of 150mm
38
© Stressline Limited 2016
CLO
SED EA
VES 130
STANDARD LENGTHS (mm) 6001500
Nominal Height “h” (mm) 150 150 150 150 150 150
Weights (kg/m) 18.1 18.1 18.1 18.1 18.1 18.1
SWL (kN) 54 45 38 33 29 26
RM (kNm) 9.2 9.2 9.2 9.2 9.2 9.2
16501800
19502100
22502400
25502700
28503000
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001500
6001500
6001500
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
11.4
8.1
12.2
11.4
12.0
12.2
11.4
12.0
12.2
11.4
12.0
12.2
11.4
12.0
12.2
SWL (kN)
SWL (kN)
SWL (kN)
46
27
46
38
25
38
32
20
32
28
17
28
24
15
24
RM (kNm)
RM (kNm)
RM (kNm)
7.8
3.6
7.8
7.8
4.8
7.8
7.8
4.8
7.8
7.8
4.8
7.8
7.8
4.8
7.8
16501800
16501800
16501800
19502100
19502100
19502100
22502400
22502400
22502400
25502700
25502700
25502700
SL130/E
SL130/E HD
SL130/E WIL
SL130/E HD WIL
SL130/E XHD
SL130/E XHD WIL
80 84 98
153
168 96
150
80 84 135
153
168 125
150
168 96
150
168 125
150
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001500
Nominal Height “h” (mm) 150 150 150 150 150 150
Weights (kg/m) 16.9 16.9 16.9 16.9 16.9 16.9
SWL (kN) 54 45 38 33 29 26
RM (kNm) 9.2 9.2 9.2 9.2 9.2 9.2
16501800
19502100
22502400
25502700
28503000Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 153 153
Weights (kg/m) 8.0 11.9
SWL (kN) 27 25
RM (kNm) 3.6 3.6
13501650
153
11.9
20
4.8
18002100
153
11.9
17
4.8
22502400
153
11.9
15
4.8
25502700Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
130 – 150mm cavity100 -115mm inner leaf
130 – 150mm cavity100 -115mm inner leaf
130 – 150mm cavity100 -115mm inner leaf
130 – 150mm cavity125 -150 inner leaf
130 – 150mm cavity125 -150 inner leaf
130 – 150mm cavity125 -150 inner leaf
39
TIM
BER
FRA
ME
APPLICATIONTimber Frame Lintels (TF) are designed for use in timber frame construction and are intended to support the outer leaf of masonry only, generally brickwork.
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTESFor general installation notes please refer to page 66.
Additional installation requirements for (TF) type lintels• To avoid excessive deflection and possible
twisting, lintels should be secured laterally with restraining clips and should be adequately propped during construction at maximum 1.2 meter centres. Props can be removed after the mortar has cured.
• A tight fitting timber batten (supplied by others) should be placed at mid span to help prevent any lateral deflection.
• Restraining clips to be spaced at maximum 500mm centres, starting from mid span. Clips must be nailed to the timber frame.
ADVANTAGES• Easy to install and suitable for a variety of
cavity walls• Can be manufactured to suit Wide Outer Leaf
(WOL) or Short Outer Leaf (SOL)• Galvanised coating ensures durability/
longevity• Supplied with appropriate number of
restraining clips
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable)RM – Resistance Moment (Serviceable)SWL – Safe Working Load
% If in doubt please contact our technical department on
01455 272457
TIMBER FRAME
© Stressline Limited 201640
© Stressline Limited 2016
TIMBER FRA
ME
98 47
‘h’ n
omin
al
SL50 TF
50 - 65mm cavity102mm outer leaf
SL50 TF HD
50 - 65mm cavity102mm outer leaf
98 67
‘h’ n
omin
al
SL70 TF
70 - 85mm cavity102mm outer leaf
SL70 TF HD
70 - 85mm cavity102mm outer leaf
98 87
‘h’ n
omin
al
SL90 TF
80 - 105mm cavity102mm outer leaf
SL90 TF HD
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 146 157 174 174 220 245
Weights (kg/m) 4.2 6.6 7.0 7.0 8.1 8.7
SWL (kN) 9
2.2
9
2.2
9
2.2
10
2.8
11
3.9
12
6.9RM (kNm)
13501800
19502100
22502400
25503000
31504800
See additional installation requirements on page 40.
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 174 220 245 280
Weights (kg/m) 7.0 8.1 8.7 9.5
SWL (kN) 12
2.4
15
5.3
15
5.3
20
11.6RM (kNm)
19502250
24003000
31504800
See additional installation requirements on page 40.
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 146 157 174 174 220 245
Weights (kg/m) 4.5 7.0 7.4 7.4 8.5 9.1
SWL (kN) 9
2.2
9
2.2
9
2.2
10
2.8
11
3.9
12
6.9RM (kNm)
13501800
19502100
22502400
25503000
31504800
See additional installation requirements on page 40.
Lintels are available in increments of 150mm
See additional installation requirements on page 40.
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 174 220 245 280
Weights (kg/m) 7.0 8.5 9.0 9.9
SWL (kN) 12
2.4
15
5.3
15
5.3
20
11.6RM (kNm)
19502250
24003000
31504800Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6001800
Nominal Height “h” (mm) 174 220 245 280
Weights (kg/m) 7.9 9.0 9.7 10.5
SWL (kN) 12
2.4
15
5.3
15
5.3
20
11.6RM (kNm)
19502250
24003000
31504800Lintels are available in increments of 150mm
See additional installation requirements on page 40.
STANDARD LENGTHS (mm) 6001200
Nominal Height “h” (mm) 146 157 174 174 220 245
Weights (kg/m) 4.8 7.5 7.9 7.9 9.0 9.7
SWL (kN) 9
2.2
9
2.2
9
2.2
10
2.8
11
3.9
12
6.9RM (kNm)
13501800
19502100
22502400
25503000
31504800Lintels are available in increments of 150mm
See additional installation requirements on page 40. 80 - 105mm cavity102mm outer leaf
98 47
‘h’ n
omin
al98 67
‘h’ n
omin
al
98 87
‘h’ n
omin
al
41
SIN
GLE
LEA
F EX
TERN
AL
SOLI
D W
ALL
APPLICATIONMeter Box (MB), Tray (TR) and Channel (CH)Designed to support:• 100mm external leaf solid blockwork• 102mm external leaf brickwork
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTES For general installation notes please refer to page 66.
Additional installation requirements for (MB), (TR) and (CH) type lintels• To avoid excessive deflection and possible
twisting, lintels should be adequately propped during construction at maximum 1.2 metre centres. Props can be removed after the mortar has cured.
• To achieve stated loading figures, Channel Lintels (CH) MUST be filled with well cured masonry before work proceeds over.
ADVANTAGES• Easy to install• Suitable for faced brick/block walls• Can be manufactured with a short/reduced
outer toe (SOL) to suit a cant brick detail or feature stone head.
• Can be manufactured to suit a wide outer leaf (WOL), e.g. 125-150mm blockwork or stonework.
• Galvanised coating ensures durability/longevity
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable)RM – Resistance Moment (Serviceable)SWL – Safe Working Load
% If in doubt please contact our technical department on
01455 272457
SINGLE LEAF EXTERNAL SOLID WALL
© Stressline Limited 201642
SING
LE LEAF EX
TERNA
L SOLID
WA
LL
SL100 CH 150
SL100 TR
SL100 MB
SL100 CH 225
95
‘h’ n
omin
al
95
‘h’ n
omin
al
100
156
100
231
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
115
75
231
115
85
231
165
231
156
225
231
156
225
231 231
156
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
3.3
2.6
8.8
5.0
4.2
8.8
6.2
8.8
7.0
7.6
8.8
7.0
7.6
8.8 8.8
7.0
SWL (kN)
SWL (kN)
SWL (kN)
SWL (kN)
8
4
57
12
5
47
12
34
29
17
30
23
15
20 17
20
RM (kNm)
RM (kNm)
RM (kNm)
1.4
9.8
1.4
9.8
3.6
9.8
4.9
5.8
9.8
4.9
5.8
9.8 9.8
4.9
6001500
6001350
6001500
16501800
15002100
16501800
19502400
19502400
6001500
25503000
25503000
16501800
31503900
31504050
42004800
19502100
See additional installation requirements on page 42.
See additional installation requirements on page 42.
See additional installation requirements on page 42.
See additional installation requirements on page 42.
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
© Stressline Limited 2016 43
INTE
RNA
L SO
LID
WA
LL
APPLICATION Galvanised steel box lintels are designed for use in internal 75mm, 100mm wide or 140-150mm wide, non-load bearing and load bearing walls.Designed to support:• Concrete floor loads• Masonry loads, timber floor joists and/or roof
trusses• Attic truss loads• Point loads: compound trusses, steel beams,
etc
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTESFor general installation notes please refer to page 66.
ADVANTAGES• Easy to install• Suitable for 75mm, 100mm wide or 140-150mm
wide walls• Can be supplied insulated for use at eaves
level at additional cost• Galvanised coating ensures durability/
longevity• Built-in plaster key – perforated plate to base
and two sides• Suitable for use under various loading
conditions
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable)RM – Resistance Moment (Serviceable)SWL – Safe Working Load
% If in doubt please contact our technical department on
01455 272457
INTERNAL SOLID WALL
© Stressline Limited 201644
© Stressline Limited 2016
INTERN
AL SO
LID W
ALL
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001500
6001200
6002700
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
80
150
225
80
150 225
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
5.3
8.3
19.9
5.3
15.9 15.9
SWL (kN)
SWL (kN)
SWL (kN)
16
51
70
2.7
7.8
23.3
11
46
2.7
15.5
55
15.5
RM (kNm)
RM (kNm)
RM (kNm)
16501800
13501500
16502400
225
15.9
49
15.5
25502700
225
19.9
40
23.3
3750 4800
SL100 BOX
SL75 BOX
SL100 BOX HD
SL100 BOX XHD
Heavy Duty
Extra Heavy Duty
Standard Duty
Light Duty
100 ‘h’ n
omin
al
75
80
100
‘h’ n
omin
al
STANDARD LENGTHS (mm) 6001500
Nominal Height “h” (mm) 108 150 150 150 225 225 225 225
Weights (kg/m) 6.9 8.3 8.3 8.3 15.9 15.9 15.9 15.9
SWL (kN) 24
4.1
30
7.8
28
7.8
24
7.8
35
15.5
30 29 27
15.5 15.5 15.5RM (kNm)
16502100
22502400
25502700
28503600
37504200
43504800
49005100Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
225
19.9
55
23.3
2850 3600
for longer lengths100
‘h’ n
omin
al
100
225
45
INTE
RNA
L SO
LID
WA
LLSL140 BOX
SL140 BOX HD
SL140 BOX XHD
140
‘h’ n
omin
al
140
‘h’ n
omin
alStandard Duty
Heavy Duty
Extra Heavy Duty
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001500
6001500
6002700
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
150
150
225
150
225
150 150 225 225
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
9.7
14.5
22.0
9.7
18.0
9.7 9.7 18.0 18.0
SWL (kN)
SWL (kN)
SWL (kN)
50
60
75
8.6
10.1
25.0
35
60
8.6
17.2
30
8.6
26
8.6
46
17.2
42
17.2RM (kNm)
RM (kNm)
RM (kNm)
16502100
1650 1800
22502400
225
18.0
54
17.2
1950 2700
225
22.0
55
25.0
28503600
225
22.0
43
25.0
37504800
25502700
28504200
43505100Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
140
‘h’ n
omin
al
140
‘h’ n
omin
al
SL100 INT
Light Duty
100
28
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 28 28 28
Weights (kg/m) 1.2 1.2 1.2
SWL (kN) with 150mm coursing 5
7
5
7
5
7SWL (kN) with 225mm coursing
900 1050 1200Lintels are available in increments of 150mm
SL75 INT
Light Duty
75
28
STANDARD LENGTHS (mm)
Nominal Height “h” (mm) 28 28 28
Weights (kg/m) 1.1 1.1 1.1
SWL (kN) with 225mm coursing 5 7 7
900 1050 1200
NOTE: SL100 INT and SL75 INT loadings are achieved with the composite action of one course of blockwork built on top.The mortar MUST be allowed to harden for at least 24 hours before applying any additional loads.
Lintels are available in increments of 150mm
© Stressline Limited 2016
140
‘h’ n
omin
al
for longer lengths
140
225
46
© Stressline Limited 2016
EXTERN
AL SO
LID W
ALL
APPLICATIONGalvanised steel box lintels are designed for use in 200-215mm solid walls and are available in three different designs: box with a lip/toe (SL200 BOX), inverted ‘T’ section (SL200 T) or back to back channel (SL200 CH).Designed to support:• Concrete floor loads• Tile hanging• Masonry loads• Timber floor joists• Attic truss loads and/or roof trusses• Point loads: compound trusses, steel beams,
etc• SL200 BOX is designed to support 19:1 load
ratio• SL200 CH and SL200 ‘T’ are designed to
support 1:1 load ratio
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTESFor general installation notes please refer to page 66.
Additional installation requirements for SL200 CH and SL200 ‘T’ type lintels:• To avoid excessive deflection and possible
twisting, lintels should be adequately propped during construction at maximum 1.2 metre centres. Props should only be removed after the mortar has cured.
• To achieve stated loading figures, SL200 CH lintels MUST be filled with well cured masonry before work proceeds over.
ADVANTAGES• Easy to install• Inverted ‘T’ and back to back channel
sections can be used to carry fair facing brick walls on both sides
• Can be used in tile-hanging external walls• Galvanised coating ensures durability/
longevity• Suitable for use under various loading
conditions
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable)RM – Resistance Moment (Serviceable)SWL – Safe Working Load
% If in doubt please contact our technical department on
01455 272457
EXTERNAL SOLID WALL
© Stressline Limited 2016 47
EXTE
RNA
L SO
LID
WA
LLSL200 BOX
SL200 BOX HD
SL200 ‘T’
SL200 CH
Standard Duty
Standard Duty
Heavy Duty
Heavy Duty
200
‘h’ n
omin
al
200
‘h’ n
omin
al
200
‘h’ n
omin
al
200
225
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
STANDARD LENGTHS (mm)
6001500
Nominal Height “h” (mm)
Nominal Height “h” (mm)
Nominal Height “h” (mm)
150 225 225
231 231
75
231
95
231
175 175
231 231
Weights (kg/m)
Weights (kg/m)
Weights (kg/m)
14.8 18.4 18.4
17.6 17.6
7.7
17.6
8.7
17.6
12.5 12.5
17.6 17.6
SWL 19:1(kN)
SWL 1:1(kN)
SWL 1:1(kN)
55
9.2
65
18.5
58
90
18.5
19.0
80
19.0
12
67
1.9
19.0
12
53
24 22
50 35
2.5
19.0
4.2 4.2
19.0 19.0
RM (kNm)
RM (kNm)
RM (kNm)
16501800
19502700
6001500
16501800
6001350
19502400
15001800
25503000
19502700
28503000
31504050
42005100
See additional installation requirements on page 47.
See additional installation requirements on page 47.
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
Lintels are available in increments of 150mm
STANDARD LENGTHS (mm) 6002100
Nominal Height “h” (mm) 150 150 225 225 225 225 225 225
Weights (kg/m) 9.9 14.8 18.4 18.4 18.4 18.4 18.4 18.4
SWL 19:1 (kN) 37
6.4
29
9.2
52
18.5
47
18.5
40
18.5
35 32 29
18.5 18.5 18.5RM (kNm)
22502700
28503000
31503300
34503900
40504350
45004800
49505100Lintels are available in increments of 150mm
© Stressline Limited 201648
STAN
DA
RD
APPLICATIONDesigned to support:• Masonry loads• Uniformly distributed timber floor loads• Uniformly distributed roof loads • Concrete floor loads• Attic truss loads• Point loads: compound trusses, steel beams,
etc
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTESFor general installation notes please refer to page 67.
Additional installation requirements for lintels supporting concrete floor units• Check that the correct lintel has been
installed.• Minimum recommended lintel depth is
140mm in order to absorb the shock loading of concrete floor. Precast flooring units should be laid on a mortar bed across the whole wall width and should not be dragged over supports.
ADVANTAGES• A cost effective range of lintels, most of which
are reversible• Easy to install and suitable for a variety of
applications: internal partitions, external cavity walls, garages, over services.
• We offer a wide range of lintels from 100 x 65 through to 215 x 140.
• If required, Stressline can schedule and deliver in house plots.
IMPORTANT NOTES• The loading figures published in the load-
span tables represent the Uniform Distributed Serviceable Load (UDL) in kN/m which can be supported by the lintel without the provision of structural brickwork/blockwork over. This is known as Independent Design.
• Lintel lengths shown greyed out within the load-span table are available in longer lengths than the maximum clear span would normally allow. These longer lengths lintels should be used over a series of openings (with intermediate supports) NOT exceeding the maximum clear span and NOT simply supported at each end (i.e. all 65mm deep lintels must not clear span more than 1800mm).
ABBREVIATIONS:UDL – Uniform Distributed Load (Serviceable) RM – Resistance Moment (Serviceable)
% If in doubt please contact our technical department on
01455 272457
PRESTRESSED CONCRETE STANDARD
© Stressline Limited 2016 49
© Stressline Limited 2016
PRES
TRES
SED
CO
NC
RETE
STA
ND
ARD
65 x 100
6 5
100
100 x 65
65
100
R15A 100 x 140100
140
R15 140 x 100
100
140
R22A 100 x 215
100
215
*UDL is restricted by shearMinimum manufactured length is 450mm Maximum manufactured length is 3000mm
STANDARD 600 750 900 1050 1200 1350 1500 1650 1800 2100 2400 2700 3000 LENGTHS (mm)
Clear Span (mm) 300 450 600 750 900 1050 1200 1350 1500 1800
Weight (kg/m) 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3
UDL (kN/m) 23.9* 23.9* 18.8* 12.4 8.7 6.5 5.0 3.9 3.2 2.2
RM (kNm) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
*UDL is restricted by shearMinimum manufactured length is 450mm Maximum manufactured length is 3000mm
STANDARD 600 750 900 1050 1200 1350 1500 1650 1800 2100 2400 2700 3000 LENGTHS (mm)
Clear Span (mm) 300 450 600 750 900 1050 1200 1350 1500 1800
Weight (kg/m) 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.3
UDL (kN/m) 23.9* 23.9* 13.8* 8.9 6.5 5.3 4.1 3.2 2.6 1.8
RM (kNm) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
*UDL is restricted by shearMinimum manufactured length is 600mm Maximum manufactured length is 4200mm
*UDL is restricted by shearMinimum manufactured length is 600mm Maximum manufactured length is 4200mm
STANDARD 1050 1200 1350 1500 1650 1800 2100 2400 2700 3000 3300 3600 4050 4200LENGTHS (mm)
Clear Span (mm) 750 900 1050 1200 1350 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (kg/m) 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0
UDL (kN/m) 40.2* 28.2 21.8 17.0 13.6 11.1 7.8 5.7 4.4 3.4 2.7 2.2 1.8 1.5
RM (kNm) 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7
STANDARD 1050 1200 1350 1500 1650 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 750 900 1050 1200 1350 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (kg/m) 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0
UDL (kN/m) 35.9* 26.3 19.3 14.8 11.8 9.5 6.6 4.8 3.6 2.8 2.2 1.8 1.5 1.2
RM (kNm) 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
*UDL is restricted by shearMinimum manufactured length is 600mm Maximum manufactured length is 4200mm
STANDARD 600 900 1200 1350 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200LENGTHS (mm)
Clear Span (mm) 300 600 900 1050 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (kg/m) 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7
UDL (kN/m) 67.6* 67.6* 51.4 44.5 35.3 23.7 17.0 12.7 9.8 7.8 6.5 5.2 4.3 3.6
RM (kNm) 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7
*UDL is restricted by shearMinimum manufactured length is 600mm Maximum manufactured length is 4200mm
STANDARD 600 900 1200 1350 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200LENGTHS (mm)
Clear Span (mm) 300 600 900 1050 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (kg/m) 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7
UDL (kN/m) 49.0* 49.0* 26.0 19.3 14.8 9.4 6.5 4.7 3.5 2.7 2.1 1.6 1.3 1.0
RM (kNm) 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
R22 215 x 100
100
215
50
© Stressline Limited 2016
PRESTRESSED C
ON
CRETE STA
ND
ARD
*UDL is restricted by shearMinimum manufactured length is 600mm Maximum manufactured length is 3000mm
STANDARD 600 900 1050 1200 1350 1500 1800 2100 2400 2700 3000LENGTHS (mm)
Clear Span (mm) 300 600 750 900 1050 1200 1500 1800
Weight (kg/m) 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2
UDL (kN/m) 33.0* 18.8* 12.3 8.6 6.3 4.8 3.1 2.1
RM (kNm) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
*UDL is restricted by shearMinimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 1200 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200LENGTHS (mm)
Clear Span (mm) 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (kg/m) 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0
UDL (kN/m) 24.2* 13.9 9.0 6.2 4.5 3.3 2.6 2.0 1.6 1.3 1.0
RM (kNm) 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
*UDL is restricted by shearMinimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 1200 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200LENGTHS (mm)
Clear Span (mm) 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (kg/m) 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7
UDL (kN/m) 61.6* 37.6* 25.1 17.9 13.3 10.3 8.1 6.5 5.3 4.4 3.7
RM (kNm) 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2
*UDL is restricted by shearMinimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 1200 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200LENGTHS (mm)
Clear Span (mm) 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (kg/m) 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7
UDL (kN/m) 43.5* 25.1 16.2 11.2 8.1 6.1 4.7 3.7 2.9 2.4 1.9
RM (kNm) 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2
*UDL is restricted by shearMinimum manufactured length is 600mm Maximum manufactured length is 3000mm
STANDARD 600 900 1050 1200 1500 1800 2100 2400 2700 3000LENGTHS (mm)
Clear Span (mm) 300 600 750 900 1200 1500 1800
Weight (kg/m) 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0
UDL (kN/m) 36.4* 36.4* 23.7 17.0 9.6 6.1 4.2
RM (kNm) 1.9 1.9 1.9 1.9 1.9 1.9 1.9
140 x 65
140
65
140 x 140
RW22A 140 x 215
RW22 215 x 140
140
215
140
140
140
215
215 x 65
215
65
51
© Stressline Limited 2016
HIG
H-S
TREN
GTH
APPLICATIONDesigned to support:• Masonry loads• Uniformly distributed timber floor loads• Uniformly distributed roof loads • Concrete floor loads• Attic truss loads• Point loads: compound trusses, steel beams,
etc
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTESFor general installation notes please refer to page 67.
Additional installation requirements for lintels supporting concrete floor units• Check that the correct lintel has been
installed.• Minimum recommended lintel depth is
140mm in order to absorb the shock loading of concrete floor. Precast flooring units should be laid on a mortar bed across the whole wall width and should not be dragged over supports.
ADVANTAGES• A cost effective, high performance range of
lintels• Easy to install and suitable for a variety of
applications: internal partitions, external cavity walls, garages, over services.
• We offer a wide range of lintels from 100 x 70 through to 215 x 215.
• If required, Stressline can schedule and deliver in house plots.
IMPORTANT NOTES• The loading figures published in the load-
span tables represent the Uniform Distributed Serviceable Load (UDL) in kN/m which can be supported by the lintel without the provision of structural brickwork/blockwork over. This is known as Independent Design.
• Lintel lengths shown greyed out within the load-span table are available in longer lengths than the maximum clear span would normally allow. These longer lengths lintels should be used over a series of openings (with intermediate supports) NOT exceeding the maximum clear span and NOT simply supported at each end (i.e. all 70mm deep lintels must not clear span more than 1800mm).
• Lintels are marked TOP and must be used in the correct orientation
ABBREVIATIONS:UDL – Uniform Distributed Load (Serviceable) RM – Resistance Moment (Serviceable)
% If in doubt please contact our technical department on
01455 272457
PRESTRESSED CONCRETE HIGH-STRENGTH
52
© Stressline Limited 2016
PRESTRESSED C
ON
CRETE H
IGH
-STRENG
THSTANDARD 900 1200 1350 1500 1800 2100 2400 LENGTHS (mm)
Clear Span (mm) 600 900 1050 1200 1500 1800
Weight (Kg/m) 17.1 17.1 17.1 17.1 17.1 17.1 17.1
UDL (kN/m) 23.9* 11.0 8.2 6.3 4.0 2.8
RM (kNm) 1.2 1.2 1.2 1.2 1.2 1.2
*UDL is restricted by shear Minimum manufactured length is 900mm Maximum manufactured length is 2400mm
STANDARD 900 1200 1350 1500 1650 1800 2100 2400 2700 3000 LENGTHS (mm)
Clear Span (mm) 600 900 1050 1200 1350 1500 1800 2100 2400 2700
Weight (Kg/m) 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9
UDL (kN/m) 41.5* 24.7 18.6 14.3 11.5 9.3 6.5 4.8 3.6 2.8
RM (kNm) 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
*UDL is restricted by shear Minimum manufactured length is 900mm Maximum manufactured length is 3000mm
STANDARD 900 1200 1350 1500 1650 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1050 1200 1350 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0
UDL (kN/m) 68.7* 40.6 35.0 27.0 21.9 17.7 12.5 9.2 7.1 5.6 4.5 3.7 3.1 2.6
RM (kNm) 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8
*UDL is restricted by shear Minimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 900 1200 1350 1500 1650 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1050 1200 1350 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 53.9 53.9 53.9 53.9 53.9 53.9 53.9 53.9 53.9 53.9 53.9 53.9 53.9 53.9
UDL (kN/m) 78.5* 63.2 57.4 49.2 43.1 36.9 27.2 21.5 16.7 13.3 10.8 9.0 7.5 6.4
RM (kNm) 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4
*UDL is restricted by shear Minimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 900 1200 1350 1500 1800 2100 2400 LENGTHS (mm)
Clear Span (mm) 600 900 1050 1200 1500 1800
Weight (Kg/m) 24.0 24.0 24.0 24.0 24.0 24.0 24.0
UDL (kN/m) 25.2* 11.6 8.5 6.5 4.2 2.8
RM (kNm) 1.3 1.3 1.3 1.3 1.3 1.3
*UDL is restricted by shearMinimum manufactured length is 900mm Maximum manufactured length is 2400mm
STANDARD 900 1200 1350 1500 1650 1800 2100 2400 2700 3000 LENGTHS (mm)
Clear Span (mm) 600 900 1050 1200 1350 1500 1800 2100 2400 2700
Weight (Kg/m) 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3
UDL (kN/m) 54.1* 35.0 26.2 20.3 16.1 13.1 9.2 6.7 5.1 4.3
RM (kNm) 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2
*UDL is restricted by shear Minimum manufactured length is 900mm Maximum manufactured length is 3000mm
100 x 70 HIGH-STRENGTH
100
70
100 x 110 HIGH-STRENGTH
100
110
100 x 140 HIGH-STRENGTH
100
140
100 x 215 HIGH-STRENGTH
100
215
140 x 70 HIGH-STRENGTH
140
70
140 x 100 HIGH-STRENGTH
140
100
53
© Stressline Limited 2016
PRES
TRES
SED
CO
NC
RETE
HIG
H-S
TREN
GTH
STANDARD 900 1200 1350 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1050 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0
UDL (kN/m) 67.5* 57.9 52.1 39.2 26.5 18.6 13.8 10.6 8.4 6.7 5.6 4.6 3.8
RM (kNm) 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8
*UDL is restricted by shear Minimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 900 1200 1350 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1050 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4
UDL (kN/m) 101.2* 81.2 73.5 63.2 46.3 33.2 24.9 19.4 15.4 12.5 10.3 8.6 7.3
RM (kNm) 16.8 16.8 16.8 16.8 16.8 16.8 16.8 16.8 16.8 16.8 16.8 16.8 16.8
*UDL is restricted by shear Minimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 900 1200 1500 1800 2100 2400 LENGTHS (mm)
Clear Span (mm) 600 900 1200 1500 1800
Weight (Kg/m) 38.6 38.6 38.6 38.6 38.6 38.6
UDL (kN/m) 44.0* 20.2 11.5 7.3 5.0
RM (kNm) 2.3 2.3 2.3 2.3 2.3
*UDL is restricted by shear Minimum manufactured length is 900mm Maximum manufactured length is 2400mm
STANDARD 900 1200 1350 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1050 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4 75.4
UDL (kN/m) 93.2* 64.3 50.8 45.9 30.1 21.2 15.6 12.0 9.4 7.5 6.2 5.1 4.2
RM (kNm) 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0
*UDL is restricted by shear Minimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 113.2 113.2 113.2 113.2 113.2 113.2 113.2 113.2 113.2 113.2 113.2 113.2
UDL (kN/m) 143.0* 112.4* 77.8 51.6 36.5 27.1 20.9 16.5 13.3 10.9 9.0 7.6
RM (kNm) 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7
*UDL is restricted by shear Minimum manufactured length is 900mm Maximum manufactured length is 4200mm
140 x 140 HIGH-STRENGTH
140
140
140 x 215 HIGH-STRENGTH
215 x 70 HIGH-STRENGTH
215
70
215 x 140 HIGH-STRENGTH
215
140
215 x 215 HIGH-STRENGTH
215
215
215
140
54
© Stressline Limited 2016
FAIR FA
CED
APPLICATIONThis type of lintel is specifically used in fair faced block/brick walls. It can be painted if required. Designed to support:• Masonry loads• Uniformly distributed timber floor loads• Uniformly distributed roof loads • Concrete floor loads• Attic truss loads• Point loads: compound trusses, steel beams,
etc
ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTESFor general installation notes please refer to page 67.
Additional installation requirements for lintels supporting concrete floor units• Check that the correct lintel has been
installed.• Minimum recommended lintel depth is
140mm in order to absorb the shock loading of concrete floor. Precast flooring units should be laid on a mortar bed across the whole wall width and should not be dragged over supports.
ADVANTAGES• A cost effective, high performance range of
lintels with a smooth fair faced finish• We offer a wide range of lintels from
100 x 110 through to 215 x 215 with further sections available in the near future.
• If required, Stressline can schedule and deliver in house plots.
IMPORTANT NOTES• The loading figures published in the load-
span tables represent the Uniform Distributed Serviceable Load (UDL) in kN/m which can be supported by the lintel without the provision of structural brickwork/blockwork over. This is known as Independent Design.
• Lintels are marked TOP and must be used in the correct orientation
ABBREVIATIONSUDL – Uniform Distributed Load (Serviceable) RM – Resistance Moment (Serviceable)
% If in doubt please contact our technical department on
01455 272457
PRESTRESSED CONCRETE FAIR FACED LINTELS
55
© Stressline Limited 2016
PRES
TRES
SED
CO
NC
RETE
FA
IR F
AC
EDSTANDARD 900 1200 1500 1800 2100 2400 2700 3000 LENGTHS (mm)
Clear Span (mm) 600 900 1200 1500 1800 2100 2400 2700
Weight (Kg/m) 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9
UDL (kN/m) 43.5* 24.1 14.0 9.1 6.3 4.7 3.5 2.8
RM (kNm) 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
*UDL is restricted by shearMinimum manufactured length is 900mm Maximum manufactured length is 3000mm
STANDARD 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3
UDL (kN/m) 56.2* 40.9 26.4 17.3 12.1 9.0 6.8 5.4 4.3 3.5 2.9 2.2
RM (kNm) 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6
*UDL is restricted by shearMinimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 52.6 52.6 52.6 52.6 52.6 52.6 52.6 52.6 52.6 52.6 52.6 52.6
UDL (kN/m) 81.5* 62.9 49.1 36.6 26.0 19.4 15.0 11.9 9.6 7.9 6.6 5.6
RM (kNm) 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5
*UDL is restricted by shearMinimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 900 1200 1500 1800 2100 2400 2700 3000 LENGTHS (mm)
Clear Span (mm) 600 900 1200 1500 1800 2100 2400 2700
Weight (Kg/m) 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3
UDL (kN/m) 54.7* 33.2 19.2 12.5 8.7 6.4 4.8 3.8
RM (kNm) 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
*UDL is restricted by shearMinimum manufactured length is 900mm Maximum manufactured length is 3000mm
STANDARD 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0
UDL (kN/m) 71.9* 52.8 34.6 22.7 16.0 11.8 9.1 7.1 5.7 4.7 3.9 3.3
RM (kNm) 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
*UDL is restricted by shearMinimum manufactured length is 900mm Maximum manufactured length is 4200mm
STANDARD 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7 73.7
UDL (kN/m) 104.2* 81.7 63.1 43.6 30.9 23.0 17.8 14.1 11.4 9.5 7.8 7.3
RM (kNm) 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9
100 x 110 Fair Faced
100
110
100 x 140 Fair Faced
100
140
100 x 215 Fair Faced100
215
140 x 100 Fair Faced
140
100
140 x 140 Fair Faced
140
140
140 x 215 Fair Faced140
215
56
© Stressline Limited 2016
PRESTRESSED C
ON
CRETE FA
IR FAC
EDSTANDARD 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 4050 4200 LENGTHS (mm)
Clear Span (mm) 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900
Weight (Kg/m) 113.2 113.2 113.2 113.2 113.2 113.2 113.2 113.2 113.2 113.2 113.2 113.2
UDL (kN/m) 143.0* 112.4* 77.8 51.6 36.5 27.1 20.9 16.5 13.3 10.9 9.0 7.6
RM (kNm) 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7
*UDL is restricted by shearMinimum manufactured length is 900mm Maximum manufactured length is 4200mm
215 x 215 Fair Faced215
215
57
APPLICATIONWhite Arch Formers are used over openings in external walls and provide a low cost solution to help form low rise (75mm and 150mm) brick arches. The facia is formed from UV stable polymer.
Arch reference Arch rise (mm) Arch Length (mm) Clear span (mm)
SL75 White Arch Former 75 475 450-500
SL75 White Arch Former 75 625 600-650
SL75 White Arch Former 75 680 655-705
SL75 White Arch Former 75 825 800-850
SL75 White Arch Former 75 925 900-950
SL75 White Arch Former 75 1050 1025-1075
SL75 White Arch Former 75 1135 1115-1165
SL75 White Arch Former 75 1225 1200-1250
SL75 White Arch Former 75 1350 1300-1350
SL75 White Arch Former 75 1485 1460-1510
SL75 White Arch Former 75 1525 1500-1550
SL75 White Arch Former 75 1625 1600-1650
SL75 White Arch Former 75 1675 1650-1700
SL75 White Arch Former 75 1700 1675-1725
SL75 White Arch Former 75 1790 1760-1810
SL150 White Arch Former 150 1950 1925-1975
SL150 White Arch Former 150 1975 1950-2000
SL150 White Arch Former 150 2125 2100-2150
SL150 White Arch Former 150 2250 2225-2275
SL150 White Arch Former 150 2325 2300-2350
SL150 White Arch Former 150 2425 2400-2450
ARCH FORMERSA
RCH
FO
RMER
S
© Stressline Limited 2016 58
SPECIA
LS
© Stressline Limited 2016
APPLICATIONStressline Special Lintels are designed and manufactured to suit the most innovative of window designs and styles including: • Semi-circular arch• Segmental arch• Parabolic arch• Gothic arch• Venetian arch • Apex lintel• Corner lintel • Splayed bay lintel • Square bay lintels
INSTALLATION NOTES For general installation notes please refer to page 66.
ADVANTAGES• Easy to install and suitable for a variety of
applications• Galvanised coating ensures durability/
longevity• Built-in plaster key – perforated base plate to
inner flange• Excellent thermal efficiency• Available for solid wall construction• Corner lintels and bay lintels can be supplied
with corner posts
INFORMATION REQUIREMENTSTo enable us to provide a quick and cost effective service, please provide our Technical Office with all the relevant information regarding: wall construction (inner leaf, cavity width, outer leaf), structural opening (clear span), arch rise or radius, loadings supported by the lintel (i.e. masonry loads, floor/roof loads).
Please refer to forms overleaf.
% If in doubt please contact our technical department on
01455 272457
SPECIALS
59
SPEC
IALS
A
R
BB
PARABOLIC ARCH LINTEL
A
H
B B
SEGMENTAL ARCH LINTEL
A
H
BB
Full Name Company Name
TelephoneFax
Email address
Job reference/Site address
Address
Postcode
Postcode
CUSTOMER DETAILS
Inside only
Both sides
None
PLASTER KEY REQUIREMENTS
please tick
Inside only
Both sides
None
PLASTER KEY REQUIREMENTS
please tick
Inside only
Both sides
None
PLASTER KEY REQUIREMENTS
please tick
Clear span (A)
Radius (R)
End bearing (B)
LINTEL DIMENSIONS
mm
mm
mm
Clear span (A)
Height of rise (H)
End bearing (B)
LINTEL DIMENSIONS
mm
mm
mm
Clear span (A)
Height of rise (H)
End bearing (B)
LINTEL DIMENSIONS
mm
mm
mm
Outer leaf
Cavity width
Inner leaf
WALL CONSTRUCTION
mm
mm
mm
Outer leaf
Cavity width
Inner leaf
WALL CONSTRUCTION
mm
mm
mm
Outer leaf
Cavity width
Inner leaf
WALL CONSTRUCTION
mm
mm
mm
Enquiries for Special lintels should be faxed to 01455 274564 © Stressline Limited 2016
SEMI-CIRCULAR ARCH LINTEL
60
SPECIA
LSInside only
Both sides
None
PLASTER KEY REQUIREMENTS
please tick
Inside only
Both sides
None
PLASTER KEY REQUIREMENTS
please tick
Inside only
Both sides
None
PLASTER KEY REQUIREMENTS
please tick
Clear span (A)
Height of rise (H)
End bearing (B)
LINTEL DIMENSIONS
mm
mm
mm
Overall Clear span (A1)
Arch Span (A2)
Radius (R)
End Bearing (B)
LINTEL DIMENSIONS
mm
mm
mm
mm
Clear span (A)
Height of rise (H)
End Bearing (B)
LINTEL DIMENSIONS
mm
mm
mm
Outer leaf
Cavity width
Inner leaf
WALL CONSTRUCTION
mm
mm
mm
Outer leaf
Cavity width
Inner leaf
WALL CONSTRUCTION
mm
mm
mm
Outer leaf
Cavity width
Inner leaf
WALL CONSTRUCTION
mm
mm
mm
GOTHIC ARCH LINTEL
APEX LINTEL
VENETIAN ARCH LINTEL
A
H
B B
R
B Overall Clear Span A1
Arch Span A2
B
A
H
B B
Enquiries for Special lintels should be faxed to 01455 274564
Full Name Company Name
TelephoneFax
Email address
Job reference/Site address
Address
Postcode
Postcode
CUSTOMER DETAILS
© Stressline Limited 2016 61
© Stressline Limited 2016
SPEC
IALS
Inside only
Both sides
None
PLASTER KEY REQUIREMENTS
please tick
Inside only
Both sides
None
PLASTER KEY REQUIREMENTS
please tick
Inside only
Both sides
None
PLASTER KEY REQUIREMENTS
please tick
Span (A)
Span (B)
LINTEL DIMENSIONS
mm
mm
Span (A)
Span (B)
Span (C)
LINTEL DIMENSIONS
mm
mm
mm
Outer leaf
Cavity width
Inner leaf
WALL CONSTRUCTION
mm
mm
mm
Outer leaf
Cavity width
Inner leaf
WALL CONSTRUCTION
mm
mm
mm
Outer leaf
Cavity width
Inner leaf
WALL CONSTRUCTION
mm
mm
mm
Do not allow for bearing. This will be added at design stage
Do not allow for bearing. This will be added at design stage
CORNER LINTEL
SPLAYED BAY LINTEL
B
CA
X°
SQUARE BAY LINTEL
B
CA
90 °
A
90°
B
Full Name Company Name
TelephoneFax
Email address
Job reference/Site address
Address
Postcode
Postcode
CUSTOMER DETAILS
See additional installation notes on page 67.
Span (A)
Span (B)
Span (C)
Angle (X)
LINTEL DIMENSIONS
mm
mm
mm
º
62
PAD
STON
ES
© Stressline Limited 2016
APPLICATIONPadstones are generally specified by engineers and architects to help spread heavy point loads across the block or brick walls.
COMPRESSIVE STRENGTHStressline padstones are manufactured in a variety of sections and lengths with a standard concrete strength of 50 N/mm². Other concrete strengths can be achieved on application. All rectangular padstones may be used in any orientation.
FINISHESStressline padstones are made from wet cast concrete in steel pan moulds providing a smooth finish.
Length (mm) Height (mm) Width (mm) Weight (kg)
300 140 102 10
215 140 215 16
215 215 102 11
440 140 102 14
440 140 215 32
440 215 102 23
215 140 102 7
300 215 102 16
440 215 190 42
440 215 215 48
600 215 102 33
L Shaped 440/440 102 215 42
PADSTONES
63
OTH
ER S
TRES
SLIN
E PR
OD
UC
TS
BEAM & BLOCK FLOORING• Prestressed Flooring• ‘I’ Beam Design• Various Sections• End Slips• Thermal flooring option available
150 and 225 mm deep beam options available
PRECAST SECTIONS• Stair Flights• Landings• Balconies
Design and installation service option available
HOLLOWCORE FLOORING• Prestressed Concrete• Spans in excess of 9m• 150mm & 200mm
Design and installation service option available
CONCRETE FENCING AND WALLING PRODUCTS• Slotted Posts• Gravel Boards• Support Posts• Morticed and Recessed Posts• Chain Link & Cranked Top Posts• Screed Rails and Bollards• Pier Caps• Copings
Wet cast and light weight variants available
OTHER STRESSLINE PRODUCTS
© Stressline Limited 2016 64
© Stressline Limited 2016
CA
ST STON
E
Complementing our wide range of structural building products, Stressline has now introduced our high quality Stanton Cast Stone range, creating both off-the-shelf and bespoke orders at our manufacturing site in Leicestershire.
VAPOUR-CUREDOne of only a handful of cast stone suppliers to manufacture vapour-cured products, our advanced production process enables us to provide a faster turnaround on your orders with improved product service life and durability. And, of course, ordering all of your structural building products from a single, trusted supplier will help you save time and money too.
From standard cast stone features to one-of-a-kind architectural statements, our in-house cast stone manufacturing capabilities are backed by skilled craftsmen and a knowledgeable technical team, ensuring that we fulfil your specifications quickly, accurately and to the highest quality standards.
DELIVERING QUALITYDeliveries of our Stanton Cast Stone products can be co-ordinated with our other structural building products arriving straight to site on the same vehicle. Trust Stressline for fuss-free procurement, simpler site management and a high quality, distinctive end result.
STANTON CAST STONE RANGE
For more information on our Stanton Cast Stone
range please contact Stressline on
01455 272457 or email [email protected]
65
MATERIAL SPECIFICATIONStressline standard galvanised steel lintels are manufactured from DX51D grade steel to BS EN 10346:2006, with a zinc coating type Z600, giving a minimum zinc coating of 600g/m² per two sides. All cut edges are treated with corrosion resistant paint. RS and RSC lintels are manufactured from structural steel plate of grade S275 to BS EN 10025-2: 2004.
INSULATIONLintels used in external walls are fully insulated with expanded polystyrene, which has an Ozone Depletion Potential (ODP) and Global Warming Potential (GWP) of zero.
QUALITYStressline products are manufactured to the highest quality, under strict control, and comply with
all relevant British Standards. We are continually assessed by the BSI to ensure our quality assurance systems comply with BS EN ISO 9001: 2008.
COSHHProducts are considered non-hazardous to health under normal use. Material data sheets are available from our technical department upon request.
STRUCTURAL PERFORMANCEThe loadings published in the load-span tables were achieved in accordance with BS EN 845-2: 2003 and tested in accordance with BS EN 846-9: 2000. Stated figures represent the Total Serviceable Uniform Distributed Load (UDL) in kN.
‘CXHD’ and ‘CH’ type lintels have been tested compositely in accordance with BS EN 846-9: 2000 with the surrounding masonry built in accordance with BS 5628. The structural performance of our lintels is supported by continuous in-house testing.
Load Ratios are always expressed as inner leaf to outer leaf: 1:1 – lintels supporting masonry only 3:1 – lintels supporting masonry and timber floors 5:1 – lintels supporting concrete floors 19:1 – lintels for eaves applications
RECOMMENDATIONS FOR INSTALLATION • Minimum recommended bearing length is
150mm. The lintel should be bedded on mortar and levelled both along the lintel and across its width. Full bricks, blocks or padstones should be used as bearing areas. Do not bear lintels onto cut blocks!
• Prior to installation, the lintel should be examined carefully for any defects or signs of damage.
• All external wall lintels MUST be installed with a flexible damp proof course (DPC) or cavity tray. In the case of cavity walls the cavity tray should extend not less than 50mm beyond the cavity return.
• Inner and outer leaves supported by the lintels should be raised together to avoid excessive eccentricity of loading.
• Masonry must not overhang any flange by more than 25mm.
• Masonry above the lintel should be allowed to cure before applying floor or roof loads.
• Composite lintels (i.e. ‘CXHD’, ‘CH’ and ‘RSC’) should be adequately propped during construction, at maximum centres of 1.2 metres. The props should not be removed until the mortar has cured. Ensure that the composite part of the lintel (channel) is fully filled with well-jointed masonry and allowed to cure.
Additional recommendations for lintels supporting concrete floor units• Check that the correct lintel has been installed.• Avoid shock loading of lintels during the
installation of concrete floor units and any sideways loading while being fitted into position. Precast flooring units should be laid on a mortar bed across the whole wall width and should not be dragged over supports.
If you are in doubt as to the structural performance or suitability of a lintel then please contact our Technical department before ordering/installation.
% If in doubt please contact our technical department on
01455 272457 or email [email protected]
The Stressline technical support desk offers free technical advice to stockists, engineers, architects, builders and private individuals from 8.00 a.m. to 5.00 p.m. Monday to Friday.
We offer a free scheduling service providing clear and concise schedules based on your working drawings (plans, elevations, sections, floor/roof layout, etc.). Structural calculations for local authority can be provided upon request to support our specification.
We can design and manufacture ‘special’ lintels to suit a variety of innovative opening shapes and cavity wall constructions. State of the art production facilities and design expertise enable us to take an architectural idea and turn it into a functioning product.
TECHNICAL – STEEL LINTELS
FM01867
© Stressline Limited 2016
TEC
HN
ICA
L –
STEE
L
66
TECH
NIC
AL – C
ON
CRETE
© Stressline Limited 2016
STRUCTURAL PERFORMANCEStressline prestressed concrete lintels are designed with a concrete strength of 50 N/mm² and utilizing strands to BS 5896:2012. Lintels are manufactured to BS EN 845-2:2003, tested to BS EN 846-9:2000, and loadings assessed as per BS 5977-1:1981. Materials used in the making of Stressline prestressed concrete lintels comply with BS EN 206-1:2000 and BS 8500.
Lintels offer a minimum of ½ hour fire resistance, which can be increased by additional protection (e.g. plasterboard).
The structural performance of our lintels is supported by continuous in-house testing.
IMPORTANT NOTESApart from 140 x 65 and 215 x 65 lintel sections all the other STANDARD lintels are reversible, which means that they can be turned either way around to suit the wall construction. Always check loadings against our load span tables.
In accordance with good practice, HIGH-STRENGTH and FAIR FACED lintels are marked TOP and this surface must be kept at uppermost all times.
QUALITYStressline products are manufactured under strict quality control and comply with all relevant
British Standards. We are continually assessed by the BSI to ensure our quality assurance systems comply with BS EN ISO 9001: 2008.
COSHHProducts are considered non-hazardous to health under normal use. Material data sheets are available from our technical department upon request.
RECOMMENDATIONS FOR INSTALLATION• The lintel should be bedded on mortar and
levelled both along the lintel and across its width. Full bricks, blocks or padstones should be used as bearing areas. Do NOT bear lintels onto cut blocks!
• Recommended minimum bearings are:- 100mm both ends in structural openings up to
1000mm long- 150mm both ends in structural openings over
1000mm longThis does not discharge the installer’s responsibility to ensure that the bearing pressures of the masonry are not exceeded. To overcome this, longer bearings may be required or additional padstones and spreaders could be provided under the bearings of the lintel.
• Prior to installation, the lintel should be examined carefully for any defects or signs of damage.
• All external wall lintels MUST be installed with a flexible damp proof course (DPC).
• Masonry must not overhang the lintel by more than 25mm.
LIFTING AND STACKING• When using mechanical plant, only 1 layer of
units should be lifted at a time and supported at or near ends.
• Units should be handled carefully as they will not withstand heavy blows, dropping or reverse bending.
• Lifting should be carried out with regard to weather conditions, particularly wind, adequate lifting capacity and lengths of chains.
• No lifting should be carried out over work areas.• Load weight should be checked prior to lifting.• Stacking should be the right way up on suitable
firm, level ground.• The bearers should be near to the ends and
vertically over each other.
Additional recommendations for lintels supporting concrete floor units• Check that the correct lintel has been installed.• Recommended minimum lintel depth is 140mm• Avoid shock loading of lintels during the
installation of concrete floor units and any sideways loading while being fitted into position. Precast flooring units should be laid on a mortar bed across the whole wall width and should not be dragged over supports.
If you are in doubt as to the structural performance or suitability of a lintel then please contact our Technical department before ordering/installation.
% If in doubt please contact our technical department on
01455 272457 or email [email protected]
Stressline Technical support desk offers free technical advice to stockists, engineers, architects, builders and private individuals from 8.00 a.m. to 5.00 p.m Monday to Friday.
We offer free, clear and concise scheduling service based on your working drawings (plans, elevations, sections, floor/roof layout, etc.). If required, we can schedule and deliver lintels in house plots with an easy referencing system to ensure that the correct lintel is used in the chosen location. Structural calculations for local authority can be provided upon request to support our specification.
TECHNICAL – CONCRETE LINTELS
FM01867
67
NO
TES
© Stressline Limited 201668
© Stressline Limited 2016
NO
TES
69
CO
NTA
CT
© Stressline Limited 2016 71
For more information on our Lintel range contact our sales team now:
01455 272457
email: [email protected] [email protected]@stressline.net
CONTACT US
facebook.com/StresslineLtd
twitter.com/StresslineLtd
Stressline LimitedFoxbank Industrial EstateStoney StantonLeicestershireLE9 4LX
T: 01455 272457F: 01455 274564 E: [email protected]: stressline.net
The information contained in this brochure was accurate at the date of publication. We reserve the right to introduce, at any time, modifications and changes of details that may be deemed necessary. June 2016.
FM01867