Linear Pendant Indirect/Direct AE106 Linear Pendant Indirect/Direct AE106 LED / SAE 0 Quick Find...
Transcript of Linear Pendant Indirect/Direct AE106 Linear Pendant Indirect/Direct AE106 LED / SAE 0 Quick Find...
Page 1/6 Rev. 04/20/18
© 2018 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com
106Linear Pendant Indirect/Direct SAE106
LED / SAE 106
Quick Find litecontrol.com SAE 106
XXXXXXECO-XXXXX/XX/XXXX
4 3 2 1
AAA
B
4 3 2 1
A
B
REV DATE RECORD DESN CHCK
FileProps-Project Tab-Doc Num -
File Props-Summary Tab-Titlejadams 01/08/18
XXX 05/19/05
Project Tab-Proj Name
XXX 05/19/05
NTSDRAWING NO.SIZE
BSCALECATALOG NO.
ENGINEERING:
CHECKED BY:
DO NOT SCALE PRINTDIMENSIONS ARE FOR
REFERENCE ONLY
DRAWN:
REV.
This document contains confidential and proprietary information of AleraLighting, a division of Hubbell Lighting, Inc. (HLI). Receipt or possession ofthis document does not convey any rights to reproduce or disclose itscontents, or to make, use , or sell anything it may disclose. Reproduction,disclosure, or use of the document or its contents, without the specific writtenauthorization of HLI, may violate the intellectual property rights of HLI.
SHT 11 SHTS
9.5"
2.5"
7.0"
2.0"
SAE105 & SAE106 SAE104
Ordering Guide
Fixture Type:
Project Name:
Feature Code Options Description
Program SAE SAE Program
Series 106 106
Mounting P Pendant
Uplight Distribution LPA Low Peak Angle**Not applicable for 10D distribution
Row Length (in feet) ___' Enter in foot increments.Note fixture lengths below.
Max Length in row 04 4', 1219mm
08 8', 2438mm
Downlight Diffuser SOF Soft Diffuse
Finish/Color C1 Matte White (Default)
CC Custom Color
Color Temperature 30K 3000K
35K 3500K
40K 4000K
Output/ft(choose one output)
080 800 Lumens
105 1050 Lumens
130 1300 Lumens
155 1550 Lumens
187 1875 Lumens
Distribution 2D 80% Up, 20% Down
4D 60% Up, 40% Down
6D 40% Up, 60% Down
8D 20% Up, 80% Down
10D 0% Up, 100% Down
Driver NDM Non Dimming
D01 1% Dimming, 0-10V
Circuiting 1C 1 Circuit
2C 2 Circuit- Uplight/Downlight**Not available with 2D or 10D distribution
Voltage UNV Universal Voltage
120 120 Volt
240 240 Volt
277 277 Volt
347 347 Volt**Excludes Emergency Battery Option
*Add suffix /V to replace all 2" non-feed canopycovers with 5" canopy covers. FA1/V = 51"suspension kit w/5" canopies; Stems (where applicable), canopies and feed cord are supplied in white regardless of fixture color unless otherwise specified
Performance*
Nomenclature Lumens/ft W/ft Efficacy080 800 6.75 119105 1050 9.25 114130 1300 11 118155 1550 13.5 115187 1875 16 117
*Values are averages of all distributions at 3500K. For each option, see IES files for most accurate performance measures.
Key Features:• Up to 133 lumens/watt efficacy
• Output range from 800 to 1875 lumens/ft
• SpectraSync™ Color Tuning Technology
• Five downlight distribution options available
• 3 SDCM color variation
• 103 degree peak angle
• DesignLights Consortium (DLC) qualified with configurations DLC Premium qualified, see www.designlights.org for specific product offerings.
9.5"
2.5"
Page 2/6 Rev. 04/20/18
© 2018 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com
106Linear Pendant Indirect/Direct SAE106
LED / SAE 106
Quick Find litecontrol.com SAE 106
Suspension Kit FA1 Suspension Kit, 51"
FA2 Suspension Kit, 87"
FA3 Suspension Kit, 219"
FA4 Suspension Kit, 363"
Optional Features Code Options Description
Nightlight _NL Nightlight Circuit Required. Enter quantity.2NL= 2 nightlight circuits/row
Emergency _BLP1 Bodine BSL310P*Indicate how many in the row. Example: 2BLP1= 2 Emergency batteries/row*Not available with 347V
Patterns PTRN Contact Factory for pattern configurations.Approval drawings required.
Thru-wiring W2 Provide Normal and Emergency Thru Wiring*
W3 Provide Normal Thru Wiring Only*Only applicable when specified with emergency
Dust Cover L1 Clear Acrylic Dust Cover Lens
End cap-shelf style ECSS End Cap, Shelf Style, 5"
T-Bar Clips CB1 T-bar clip - 15/16"
Ordering Guide (continued)
Control Options Code Options Description
NX* NXE NX Enabled, Dual SmartPorts
NXWE NX Wireless Enabled
NXES NX Enabled, Dual SmartPorts, PIR Occupancy Sensor, Dimming Daylight Harvesting
NXS NX Enabled, PIR Occupancy Sensor, Dimming Daylight Harvesting(standalone)
NXSW NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting*Not available for row mounting; Only available with D01 Driver option; Contact factory for Length restrictions
Sensors _SD1 Daylight Sensor Required. Enter quantity.2SD1= 2 daylight sensors/row
_SO4 Occupancy Sensor Required. Enter quantity.2SO1= 2 occupancy sensors/row
Page 3/6 Rev. 04/20/18
© 2018 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com
106Linear Pendant Indirect/Direct SAE106
LED / SAE 106
Quick Find litecontrol.com SAE 106
DetailsConstruction: 20 gauge formed steel housingLens- extruded acrylic
Distribution: 80/20 indirect/direct distribution with downlight tray.60/40, 40/60, 20/80 and 0/100 distributions provided with downlight tray.When selected uplight is low peak angle (LPA) by default.
Downlight Diffuser: SOF- Softglow acrylic lens (ships installed)
Finish/Color:Visit www.litecontrol/resources/finishes for details.
Color Temperature: 30K- 3000K output multiplier .9935K- 3500K output multiplier 1.0040K- 4000K output multiplier 1.02
Sensors: SD1: Daylight sensor (Wattstopper part #FD301). Installs on luminaire housing.SO4: Occupancy sensor (Wattstopper part #FS205). Installs on luminaire housing.NX: NX Sensors installs between diffusers. See separate Control Options Guide for additional details.
Nightlight: See separate LC-Nightlight spec sheet for additional details.
Emergency: Integral-Bodine BS310LP Inverter-Compatible. Provided by others.
Thru-Wiring: See separate LC- Thru Wire spec sheet for additional details.
Canopy Covers: Non-feed- 2" diameter (unless 5" non-feed is specified)Feed- 5" diameter
Dust Cover: Available. Clear acrylic.
Row Joining: 10-32 machine screws and nuts(provided) are accessible without removal of any components.
End caps: 5/16" Die-cast flat aluminum end caps, standard.ECSS- 5" Shelf style end caps available.
Feed Cord: 3-wire, 7 amps max; 4-wire, 7 amps max; 5-wire, 5 amps max.
Field accessibility: LED boards and drivers can be accessed and removed from installed fixture. LED Boards can be replaced either individually or as part of a module.
Fixture Weight: 3 lbs/ft.
Ratings: CSA listed for damp locations.
Warranty:LED boards- 5 yearsLED drivers (standard)- 5 years
Rated Life: Tested in accordance with the LM79-2008 and derived from EPA TM-21 calculator L70: 257,000 (calculated per TM-21 extrapolated curve)L70: >60,000 (reported per TM-21/LM80 6x's limitation)L90: 55,000 (calculated per TM-21 extrapolated curve)
Color Variation: 3 step MacAdam ellipse
Output: Select outputs allow for consistent specification. Fixture will be programmed and labeled to specification. Outputs in lumens/ft within the below range:
Output/ft Lumens/Ft 080 800 105 1050 130 1300 155 1550 187 1875
Driver:NDM: Non-dimming. Fixture will be wired for fixed light output.D01: 100%-1% dimming range. Fixture will be wired for low voltage
0-10V dimming control.
Circuiting: 1C (1 Circuit) Uplight and downlight switched/dimmed together.2C (2 Circuit) Uplight and downlight switched/dimmed separately.
Suspension Kit: 1/16" diameter field-adjustable aircraft cables. Suspension required at every row joint. Suspension kit ships separately.
Hardware Kit: All fixture mounting hardware prepackaged and kitted per row. Hardware kits ships separately.
NX Distributed Intelligence:Supports indoor and outdoor applications, wired, wireless and hybridnetworked NX lighting control deployments and enables emergingapplications such as Hubbell Lighting’s SpectraSync™ color tuningtechnology.See separate NX™ Application Guide for additional details.See Hubbell Controls Solution NX Brochure.
Y
.35
.40
.43
X
.35 .40 .45 .50
ANSI 4000K
ANSI 3500K
ANSI 3000K
™
Page 4/6 Rev. 04/20/18
© 2018 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com
106Linear Pendant Indirect/Direct SAE106
LED / SAE 106
Quick Find litecontrol.com SAE 106
Details (continued)Planning for Installation: Suspension Mounting LocationsPendant locations at ends of rows (or individual fixtures) are 3/8" from fixture ends. Pendant attachment allows for horizontal adjustment to "finetune" side-to-side leveling.
Individual Mounting:
Row Mounting:
XX XX/XX/XX ECO-XXXX XXX XXX
D
C
B
A
128 7 6 5 4 3 2
D
C
B
A
128 7 6 5 4 3
This document contains confidential and proprietary information of AleraLighting, a division of Hubbell Lighting, Inc. (HLI). Receipt or possession ofthis document does not convey any rights to reproduce or disclose itscontents, or to make, use , or sell anything it may disclose. Reproduction,disclosure, or use of the document or its contents, without the specific writtenauthorization of HLI, may violate the intellectual property rights of HLI.
UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.005FRACTIONS=u1/64 ANGULAR TOLERANCE=u2v
CRITICAL DIMENSIONS
PART NO:
REV.
FINISH:MATERIAL:
THIRD ANGLE PROJECTION
DRAWN BY:
DO NOT SCALE PRINT
CONFORMS TO ASME Y14.5M
DIMENSIONS IN [ ] IN MMDIMENSIONS IN INCHES
CHECKED BY:
ENGINEERING:
CATALOG NO: SCALE
DSIZE DRAWING NO.
CHCKDESNRECORDDATEREV
SHT 13 SHTS
File Props Custom File Props Custom
SAE106 SPEC INSTALL
File Props Custom
-
SAE106 SPEC INSTALLjadams 12/18/17
XXX 05/19/05
Project Tab-Proj Name
XXX 05/19/05
PV:1
FIXTURE LENGTH
1 1/8"
2 11/16"
3/8"
9 1/2"
5/8" KO 1/2" KO5/16"
XX XX/XX/XX ECO-XXXX XXX XXX
D
C
B
A
128 7 6 5 4 3 2
D
C
B
A
128 7 6 5 4 3
This document contains confidential and proprietary information of AleraLighting, a division of Hubbell Lighting, Inc. (HLI). Receipt or possession ofthis document does not convey any rights to reproduce or disclose itscontents, or to make, use , or sell anything it may disclose. Reproduction,disclosure, or use of the document or its contents, without the specific writtenauthorization of HLI, may violate the intellectual property rights of HLI.
UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.005FRACTIONS=u1/64 ANGULAR TOLERANCE=u2v
CRITICAL DIMENSIONS
PART NO:
REV.
FINISH:MATERIAL:
THIRD ANGLE PROJECTION
DRAWN BY:
DO NOT SCALE PRINT
CONFORMS TO ASME Y14.5M
DIMENSIONS IN [ ] IN MMDIMENSIONS IN INCHES
CHECKED BY:
ENGINEERING:
CATALOG NO: SCALE
DSIZE DRAWING NO.
CHCKDESNRECORDDATEREV
SHT 23 SHTS
File Props Custom File Props Custom
SAE106 SPEC INSTALL
File Props Custom
-
SAE106 SPEC INSTALLjadams 12/18/17
XXX 05/19/05
Project Tab-Proj Name
XXX 05/19/05
PV:1
FAI/ACC/F FAI/ACC
3/8"3/8"SIDE VIEW - INDIVIDUAL MOUNTED
PENDANT MOUNTED FIXTURE
END CAP
48", 96"
XX XX/XX/XX ECO-XXXX XXX XXX
D
C
B
A
128 7 6 5 4 3 2
D
C
B
A
128 7 6 5 4 3
This document contains confidential and proprietary information of AleraLighting, a division of Hubbell Lighting, Inc. (HLI). Receipt or possession ofthis document does not convey any rights to reproduce or disclose itscontents, or to make, use , or sell anything it may disclose. Reproduction,disclosure, or use of the document or its contents, without the specific writtenauthorization of HLI, may violate the intellectual property rights of HLI.
UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.005FRACTIONS=u1/64 ANGULAR TOLERANCE=u2v
CRITICAL DIMENSIONS
PART NO:
REV.
FINISH:MATERIAL:
THIRD ANGLE PROJECTION
DRAWN BY:
DO NOT SCALE PRINT
CONFORMS TO ASME Y14.5M
DIMENSIONS IN [ ] IN MMDIMENSIONS IN INCHES
CHECKED BY:
ENGINEERING:
CATALOG NO: SCALE
DSIZE DRAWING NO.
CHCKDESNRECORDDATEREV
SHT 33 SHTS
File Props Custom File Props Custom
SAE106 SPEC INSTALL
File Props Custom
-
SAE106 SPEC INSTALLjadams 12/18/17
XXX 05/19/05
Project Tab-Proj Name
XXX 05/19/05
PV:1
3/8" FIXTURE LENGTHMINUS 3/4"
FIXTURE LENGTH FIXTURE LENGTH FIXTURE LENGTH
FAI/ACC/F FAI/ACC
END CAP SIDE VIEW - ROW MOUNTEDPENDANT MOUNTED FIXTURES
FIXTURE AT END OF ROW FIXTURE AT END OF ROWINT FIXTURE INT FIXTURE
Page 5/6 Rev. 04/20/18
© 2018 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com
106Linear Pendant Indirect/Direct SAE106
LED / SAE 106
Quick Find litecontrol.com SAE 106
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Rela
tive
Pow
er
Wavelength (nm)
SPECTRAL POWER DISTRIBUTION COMPARISON
Color Characteristics:
Color Vector Graphic:30K:
35K:
40K:
Spectral Distribution:
Color Gamut/Fidelity Plot
CRI:80 minimum
ValueOrdering Code
30K 35K 40K
Rf 83 82 81
Rg 98 97 93
CCT (K) 3029 3447 3940
Duv 0 -0.0003 0.0012
x 0.4349 0.408 0.3840
y 0.4033 0.3914 0.3815
CIE Ra 83 83 84
Details (continued)
30K35K40K
Rela
tive
Pow
er
30K35K40K
Wavelength (nm)
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
SPECTRAL POWER DISTRIBUTION COMPARISON
60
70
80
90
100
110
120
130
140
50 60 70 80 90 100
Gam
ut In
dex,
Rg
Fidelity Index, Rf
1 2 1
2
Approx. limits for sources on the Planckian locus.
Approx. limits for practical light sources.
Rf-Rg Plot
30K35K40K
CCT CRI R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14
30K 83 81 90 96 82 81 86 85 63 14 76 80 67 83 98
35K 83 81 89 95 81 81 85 86 64 12 74 80 63 83 97
40K 84 82 91 96 81 82 87 86 66 16 78 79 58 85 98
Page 6/6 Rev. 04/20/18
© 2018 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com
106Linear Pendant Indirect/Direct SAE106
LED / SAE 106
Quick Find litecontrol.com SAE 106
PhotometryFixture: SAE106-P-LPA-4-04-SOF-C1-35K-130-2D-D01-1C-UNVCCT: 3500KOutput: 130Nominal lumens: 5383 lumensEfficacy: 131.3 lm/WTest report: P16.02759
Zonal Lumen SummaryZone Lumens Lamp%0-40 401 7.70%0-60 762 14.60%0-90 1003 19.20%90-180 4207 80.80%0-180 5210 100.00%
701 Millennium BlvdGreenville, SC 29607www.hubbelllighting.com
THIS REPORT IS BASED ON PUBLISHED INDUSTRY PROCEDURES. FIELD PERFORMANCE MAY DIFFER FROM LABORATORY PERFORMANCE.
REPORT NUMBER: 16.02759 PAGE: 3 OF 9 ISSUE DATE: 10/24/16 PREPARED FOR: ALERA LIGHTING CATALOG NUMBER: LCVR-L-35ML-20 LUMINAIRE: 9.5 X 48, LED CURV WITH LINEAR FROSTED OPAL LENS LAMP CAT. NO.: 93072009-2103 LAMP: 240- 3500K Nichia LEDs BALLAST CAT. NO.: XI040C110V054BST1= 1060mA BALLAST: 1- Philips REFLECTOR: #93056146 White Paint Steel,Postpainted MOUNTING: Pendant REFRACTOR: #93038709 Virgin, Frosted Acrylic NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED.
CANDELA DISTRIBUTION FLUX0.0 22.5 45.0 67.5 90.0
0 285 285 285 285 2855 290 285 286 284 283 27
15 284 280 288 290 291 81 25 269 270 284 295 299 131 35 246 250 273 290 297 170 45 215 220 245 267 276 188 55 172 179 200 224 232 179 65 121 127 145 162 169 143 75 68 73 85 96 101 90 85 21 25 34 43 46 38 90 1 9 17 24 28 95 35 394 438 210 133 357 105 115 503 874 1074 1144 813 115 204 558 910 1137 1211 819 125 287 585 899 1099 1162 741 135 358 585 860 1040 1095 621 145 413 559 788 937 990 469 155 453 525 681 796 836 307 165 477 498 562 624 646 161 175 488 487 491 495 497 48 180 483 483 483 483 483
ZONAL LUMEN SUMMARY ZONE LUMENS %FIXT
0- 30 239 4.40- 40 409 7.60- 60 777 14.40- 90 1048 19.590-120 1988 36.9
90-130 2729 50.7 90-150 3819 71.0 90-180 4335 80.5
0-180 5383 100.0
TOTAL INPUT WATTS = 41.0 EFFICACY = 131.3 Lm/W CIE TYPE - SEMI-INDIRECT
PLANE : 0-DEG 90-DEG SPACING CRITERIA : 1.3 1.6
LEGEND: 0-deg: 45-deg: 90-deg:
550
1100
550
1100
0˚ 15˚ 30˚ 45˚
60˚
75˚
90˚
180˚ 165˚ 150˚ 135˚
120˚
105˚
90˚
1100
550
1100
550
180° 165° 150° 135°
120°
105°
75°
60°
45°30°15°0°
90°