Limbach Offsite Brochure
-
Upload
limbach-facility-services -
Category
Documents
-
view
224 -
download
1
description
Transcript of Limbach Offsite Brochure
LIMBACH OFFSITEDESIGNED • MANUFACTURED • INSTALLED
Benefits
• Safer projects – reduced work at height, less congestion and improved logistics on site
• Higher Productivity – tasks normally performed in a construction site environment are executed in a fabrication shop with stationary equipment and less material handling
• Enhanced quality control – work is performed in a controlled environment where inspection and testing practices are incorporated in standard work practices
• Schedule – compressed overall project schedules through manufacturing of mechanical system in parallel with site built elements
• Better fit and sequencing – access to the work is made easier by assembling components from all sides without the interference of building structure
• Minimization of waste – both material, through re-use of cut lengths, and time, through the elimination of the typical tool and material “searches” that occur on a congested project site
Offsite mechanical systems offer the following benefits to the overall project:
www.limbachinc.com
To learn more about Limbach Offsite, visit our website at:www.Limbachinc.com
LIMBACH OFFSITEDESIGNED • MANUFACTURED • INSTALLED
www.limbachinc.com
Offsite Distribution Racks
DESIGNED
The latest technology of BIM and 3D coordination allows Limbach to configure ceiling spaces and utility risers into offsite assemblies.
MANUFACTURED
With the help of our technology partner, MEP Solutions, Limbach has the capability to manufacture within our shops or in temporary project specific factories.
INSTALLED
Just in time delivery and careful planning is required to gain all of the scheduling advantages of offsite construction. Limbach and MEP Solutions have the experience to maximize the benefits of offsite construction.
Multi-service distribution racks are manufactured in a controlled environment. Work typically done at height is performed by workers at floor level, eliminating hours of exposure to risk of falls. Distribution racks can either be horizontal as in the case of corridor racks or vertical as in the case of riser distribution systems.
o configure ceililiing spaces a dnd utitililitty riisers
Modular Plants
DESIGNED
Engineers at Limbach are utilized to move complete mechanical equipment rooms offsite.
MANUFACTURED
Limbach expands on the equipment assembly manufacturing capabilities to achieve complete modular equipment plants within the fabrication shop.
INSTALLED
The experiences and professional project management of Limbach are focused on timely coordination of delivery followed by connection to onsite utilities, start-up and commissioning.
Fully customizable modular plant rooms are engineered to the specific application. They can be fully clad, such as the boiler plants seen here, or installed as a modular sub-section of a building. Plants are fully complete with equipment, services, wiring and controls for a “plug and play” functionality.
cal equipment rooms offsite.
er
a,
LIMBACH OFFSITEDESIGNED • MANUFACTURED • INSTALLED
www.limbachinc.com
Modular Plants
DESIGNED
Engineers at Limbach are utilized to move complete mechanical equipment rooms offsite.
MANUFACTURED
Limbach expands on the equipment assembly manufacturing capabilities to achieve complete modular equipment plants within the fabrication shop.
INSTALLED
The experiences and professional project management of Limbach are focused on timely coordination of delivery followed by connection to onsite utilities, start-up and commissioning.
Fully customizable modular plant rooms are engineered to the specific application. They can be fully clad, such as the boiler plants seen here, or installed as a modular sub-section of a building. Plants are fully complete with equipment, services, wiring and controls for a “plug and play” functionality.
cal equipment rooms offsite.
er
a,
LIMBACH OFFSITEDESIGNED • MANUFACTURED • INSTALLED
www.limbachinc.com
LIMBACH OFFSITEDESIGNED • MANUFACTURED • INSTALLED
www.limbachinc.com
Offsite Distribution Racks
DESIGNED
The latest technology of BIM and 3D coordination allows Limbach to configure ceiling spaces and utility risers into offsite assemblies.
MANUFACTURED
With the help of our technology partner, MEP Solutions, Limbach has the capability to manufacture within our shops or in temporary project specific factories.
INSTALLED
Just in time delivery and careful planning is required to gain all of the scheduling advantages of offsite construction. Limbach and MEP Solutions have the experience to maximize the benefits of offsite construction.
Multi-service distribution racks are manufactured in a controlled environment. Work typically done at height is performed by workers at floor level, eliminating hours of exposure to risk of falls. Distribution racks can either be horizontal as in the case of corridor racks or vertical as in the case of riser distribution systems.
o configure ceililiing spaces a dnd utitililitty riisers
LIMBACH OFFSITEDESIGNED • MANUFACTURED • INSTALLED
www.limbachinc.comEquipment Assemblies
DESIGNED
Using Building Information Modeling (BIM), Limbach creates manufacturing documents for accurate point to point assemblies.
MANUFACTURED
Modern Fabrication shops at Limbach allow for productive, efficient, and quality manufacturing.
INSTALLED
Field installation of equipment assemblies is coordinated with the construction to optimize time.
Skid mounted equipment assemblies allow for offsite fabrication of typically congested mechanical equipment rooms. Skids can be mounted complete with inertia bases, controls and devices.
h
LIMBACH OFFSITEDESIGNED • MANUFACTURED • INSTALLED
www.limbachinc.comEquipment Assemblies
DESIGNED
Using Building Information Modeling (BIM), Limbach creates manufacturing documents for accurate point to point assemblies.
MANUFACTURED
Modern Fabrication shops at Limbach allow for productive, efficient, and quality manufacturing.
INSTALLED
Field installation of equipment assemblies is coordinated with the construction to optimize time.
Skid mounted equipment assemblies allow for offsite fabrication of typically congested mechanical equipment rooms. Skids can be mounted complete with inertia bases, controls and devices.
h
LIMBACH OFFSITEDESIGNED • MANUFACTURED • INSTALLED
Benefits
• Safer projects – reduced work at height, less congestion and improved logistics on site
• Higher Productivity – tasks normally performed in a construction site environment are executed in a fabrication shop with stationary equipment and less material handling
• Enhanced quality control – work is performed in a controlled environment where inspection and testing practices are incorporated in standard work practices
• Schedule – compressed overall project schedules through manufacturing of mechanical system in parallel with site built elements
• Better fit and sequencing – access to the work is made easier by assembling components from all sides without the interference of building structure
• Minimization of waste – both material, through re-use of cut lengths, and time, through the elimination of the typical tool and material “searches” that occur on a congested project site
Offsite mechanical systems offer the following benefits to the overall project:
www.limbachinc.com
To learn more about Limbach Offsite, visit our website at:www.Limbachinc.com