LiBAL Fast Charge Interface™ - lithiumbalance.com · Data Logging SD card, ... Suitable for...
2
LiBAL Fast Charge Interface™ INTRODUCTION The LiBAL Fast Charge Interface™ is designed as an accessory to the Lithium Balance BMS product line, allowing fast, safe and simple addion of DC fast charging capabilies to any vehicle powered by a Lithium Balance BMS. This modular approach offers the capability to deploy DC fast charging simply and flexibly in a vehicle. The funconality of the LiBAL Fast Charge Interface™ can be fully configured using Lithium Balance PC configuraon tool via CAN Bus. Automove Industrial EV’s Marine Material handling BENEFITS OF FAST CHARGING Reducon in baery size (kWh) & weight Reducon on Baery cost Increased upme of electric vehicles / applicaons Eliminaon of baery swap operaons Improved total cost of ownership Switching controls Baery pack CAN CAN BMS Vehicle side LiBAL Fast Charge Interface™ Increased and improved duty cycle me with Fast Charging in the following applicaons Vehicle side interface to GB/T Fast Charger BENEFITS OF LiBAL FAST CHARGE INTERFACE™ Cost efficient and easy implementaon of GB/T fast charging Compact & installaon friendly design Safety rated (ASIL D) microcontroller Real me operang system (oponal ASIL D) The LiBAL Fast Charge Interface™ by Lithium Balance A/S enables vehicle side implementaon to interface with GB/T based fast charging system. The product has been designed to enable fast adaptaon and integraon to any baery pack. The LiBAL Fast Charge Interface™ fully implements the physical and protocol level of the GBT standard. This includes all CAN frames required for the GBT fast charging as well as I/O ports for controlling high voltage contactors in full compliance with the GBT standard for DC fast charging. The LiBAL Fast Charge Interface™ communicates with the on board Baery Management System (BMS) using a separate isolated CAN bus interface in order to conduct the DC fast charging in full compliance with the operaonal limits set by the BMS. FUNCTIONALITY GBT control logic Configurable relay drivers Configurable IOs Data logging 100617 GBT Chargeplug not included Vehicle side interface to GBT Fast Charger GBT Fastcharger
Transcript of LiBAL Fast Charge Interface™ - lithiumbalance.com · Data Logging SD card, ... Suitable for...
LiBAL Fast Charge Interface™
INTRODUCTION
The LiBAL Fast Charge Interface™ is designed as an accessory to the Lithium Balance BMS product line, allowing fast, safe and simple addition of DC fast charging capabilities to any vehicle powered by a Lithium Balance BMS. This modular approach offers the capability to deploy DC fast charging simply and flexibly in a vehicle.
The functionality of the LiBAL Fast Charge Interface™ can befully configured using Lithium Balance PC configuration toolvia CAN Bus.
AutomotiveIndustrial EV’s Marine Material handling
BENEFITS OF FAST CHARGINGReduction in battery size (kWh) & weightReduction on Battery costIncreased uptime of electric vehicles / applicationsElimination of battery swap operationsImproved total cost of ownership
Switchingcontrols
Baery pack
CAN
CAN
BMS
Vehicle side
LiBAL FastCharge Interface™
Increased and improved duty cycle time with Fast Charging in the following applications
Vehicle side interface toGB/T Fast Charger
BENEFITS OF LiBAL FAST CHARGE INTERFACE™Cost efficient and easy implementation of GB/T fast chargingCompact & installation friendly designSafety rated (ASIL D) microcontrollerReal time operating system (optional ASIL D)
The LiBAL Fast Charge Interface™ by Lithium Balance A/S enables vehicle side implementation to interface with GB/T based fast charging system. The product has been designed to enable fast adaptation and integration to any battery pack.
The LiBAL Fast Charge Interface™ fully implements the physical and protocol level of the GBT standard. This includes all CAN frames required for the GBT fast charging as well as I/O ports for controlling high voltage contactors in full compliance with the GBT standard for DC fast charging. The LiBAL Fast Charge Interface™ communicates with the on board Battery Management System (BMS) using a separate isolated CAN bus interface in order to conduct the DC fast charging in full compliance with the operational limits set by the BMS.
FUNCTIONALITYGBT control logicConfigurable relay driversConfigurable IOsData logging
100617 GBT
Chargeplug not included
Vehicle side interface toGBT Fast Charger
GBTFastcharger
PARAMETERS SPECIFICATIONSMechanicalDimensions 103.5 mm X 101.6 mm X 42.3 mmIP rating IP67Operating Temperatures -40 Deg C to + 85 Deg CWeight 300 gInstallation 2 X M6 Bolts
ElectricalSupply 6VDC to 16VDC ( 12V optimal ) Consumption 80 – 100 mA @ 12VDC
HardwareController Automotive grade ASIL DController Speed 80 MHzCAN 1 CAN2.0 A/B - Galvanic Isolation - 125Kbps to 1MbpsCAN 2 CAN2.0 A/B - Galvanic Isolation - 125Kbps to 1MbpsIOs ChadeMO standard compliant 2 X Relay DriversRTC YesData Logging SD card, high-end industrial grade; Suitable for automotive use
PC SoftwareInterface - USB DongleOS : Windows Vista , 7 , 8Pro Version - Calibration Development capabilityService Version - Field Service & troubleshootingVia CAN BUS
102
130 42 130
76133
42
LIBAL FAST CHARGE INTERFACE™
[email protected]: +45 5851 5104
LiTHIUM BALANCE A/SBaldershøj 26C 2635 Ishøj, Denmark
Litt
. no.
100
902
LiBAL Fast Charge Interface™100616 CHAdeMO
Fast Charging Standard GBT standard EMC Immunity Tested as per EN61000-4-3 (80MHz – 3000MHz) at 200 V/m, EN61000-4-4 (4kV)Temperature Specifications Operational -40° to 85°CVibration Tolerance Tested as per EN60068-2-6 random vibration (10 – 1000Hz)Certifications CE marking
![Autdev Interface [Autorship + Webdevelopment + Interface]](https://static.fdocuments.us/doc/165x107/568bd8ee1a28ab2034a52641/autdev-interface-autorship-webdevelopment-interface.jpg)
