CONTACT GRILLINGTo engage contact grilling mode, the top and bottom grill plates must be securely attached.

Start by aligning the notches of the grill plates with the corresponding slots near the grill’s hinge.

Apply firm pressure until you hear the grill plate notch and top tabs click into place.

Now you can plug in the grill and turn it on using the switch on the side. The red light will turn on to indicate contact grilling mode.

LET’SGRILL &BROIL

BROILINGFor broiling mode, remove the top grill plate to expose the broiler heating element.

Push the quick-release button on each side of the top plate, then slide it out to remove.

The grill is in broiling mode when the blue broil light turns on.

Broiler Safety SwitchThe grill and broil contains a safeguard to prevent the broiler heating element from turning on if the grill is open. This switch is not visible.

This Broiler Safety Switch makes a slight noise when opening and closing the grill. It may sound like a marble is rolling back and forth when you lift the lid or move the grill around.

PREHEATED(for contact grill mode)Illuniates when grill is at

desired tempature.

BROIL POWER ON(for broil mode)

POWER ON(for contact grill mode)

Quick-ReleaseButton

Align Notch

Power Button

If both grill plates are attached but the blue broil light is lit up, make sure the plates are secured at all four of the connection points. The plates must be firmly attached for contact grilling mode to engage.