LED WALL WASHER - g2glighting.com · INSTRUCTION OF LED WALL WASHER LED WALL WASHER This product is...

4
LWW-5-36P INSTRUCTION OF LED WALL WASHER LED WALL WASHER This product is mainly used for decorating and highlighting in building frame, garden, etc. It can work in independent mode and DMX mode, which can generate various color changing effects, such as flashing, fading, steady ,seven color jumping synchronously etc. DMX256 class gray degree dimmer, DMX programable(thousands of effects. available if many lights being connected together); A. Specificatione r u t c u r t S : . 1 - A Material of Shell: Aluminum alloy/6063 Rotary angle: 140° Input Voltage: 90~305V AC Operating Voltage: 24V DC Protection Rating: IP65 Operating Temperature: -20-40A-2.Model Configuration Table B. Working Mode: B-1.Independent Mode:Choose the build-in programs via the buttons on the end cover. B-2.DMX Mode:International standard DMX512 signal(IP68 connector). B-3.Master/Slave Mode:Auto online and synchro working. C. Function & Setup C-1. DMX Addressing B-2. Mode DMX: signal de norme internationale DMX512( connecteur Ip68). B-3. Mode maître / esclave: Auto en ligne et travail synchro. When the digital LED is not flashing, press A, digital LED begin to flash, press A once, active digital LEDs moves backward, you can start to edit the second digital LED;Press B, the corresponding flash digital LED increase one bit(the values between 1 to 9); 0 1 5 ~ 1 0 0 : s s e r d d A X M D d i l a V * * * B-1.Mode indépendant: Choisissez les programmes de construction en passant par les boutons sur la couverture de fin Lorsque le voyant numérique ne clignote pas, appuyez sur A, numérique LED commence à clignoter, appuyez une fois, actifs LED numériques se déplace vers l'arrière, vous pouvez commencer à éditer le second LED numérique; Appuyez sur B, le numérique flash LED correspondant augmenter un bit (les valeurs entre 1 à 9). G2GLWW-5 Series ITEM NO.: Model No. LED Quantity Power Consumption Beam Angle Size Weight G2GLWW-5-18P 18 20 WATTS o o o 10 /30 /45 L580xW(147/78)xH(70/118)mm 2.80kg±5% G2GLWW-5-36P 36 40 WATTS o o o 10 /30 /45 L1240xW(147/78)xH(70/118)mm 5.5kg±5% R/G/B/CW/NW/WW/RGB R/G/B/CW/NW/WW/RGB Color

Transcript of LED WALL WASHER - g2glighting.com · INSTRUCTION OF LED WALL WASHER LED WALL WASHER This product is...

Page 1: LED WALL WASHER - g2glighting.com · INSTRUCTION OF LED WALL WASHER LED WALL WASHER This product is mainly used for decorating and highlighting in building frame, garden, etc. It

LWW-5-36P

INSTRUCTION OF LED WALL WASHER

LED WALL WASHER

This product is mainly used for decorating and highlighting in building frame, garden, etc. It can work in independent mode and DMX mode, which can generate various color changing effects, such as flashing, fading, steady ,seven color jumping synchronously etc. DMX256 class gray degree dimmer, DMX programable(thousands of effects. available if many lights being connected together);

A. Specification:erutcurtS :.1-A

Material of Shell: Aluminum alloy/6063Rotary angle: 140°Input Voltage: 90~305V ACOperating Voltage: 24V DCProtection Rating: IP65Operating Temperature: -20℃-40℃

A-2.Model Configuration Table

B. Working Mode:B-1.Independent Mode:Choose the build-in programs via the buttons on the end cover.B-2.DMX Mode:International standard DMX512 signal(IP68 connector).B-3.Master/Slave Mode:Auto online and synchro working.

C. Function & SetupC-1. DMX Addressing

B-2. Mode DMX: signal de norme internationale DMX512( connecteur Ip68).B-3. Mode maître / esclave: Auto en ligne et travail synchro.

When the digital LED is not flashing, press A, digital LED begin to flash, press A once, active digital LEDs moves backward, you can start to edit the second digital LED;Press B, the corresponding flash digital LED increase one bit(the values between 1 to 9);

015~100:sserddA XMD dilaV ** *

B-1.Mode indépendant: Choisissez les programmes de construction en passant par les boutons sur la couverture de fin

Lorsque le voyant numérique ne clignote pas, appuyez sur A, numérique LED commence à clignoter, appuyez une fois, actifs LED numériques se déplace vers l'arrière, vous pouvez commencer à éditer le second LED numérique; Appuyez sur B, le numérique flash LED correspondant augmenter un bit (les valeurs entre 1 à 9).

G2GLWW-5 SeriesITEM NO.:

Model No. LED

QuantityPower

ConsumptionBeamAngle Size Weight

G2GLWW-5-18P 18 20 WATTS o o o10 /30 /45 L580xW(147/78)xH(70/118)mm 2.80kg±5%

G2GLWW-5-36P 36 40 WATTS o o o10 /30 /45 L1240xW(147/78)xH(70/118)mm 5.5kg±5%

R/G/B/CW/NW/WW/RGB

R/G/B/CW/NW/WW/RGB

Color

Page 2: LED WALL WASHER - g2glighting.com · INSTRUCTION OF LED WALL WASHER LED WALL WASHER This product is mainly used for decorating and highlighting in building frame, garden, etc. It

G2GLWW-5 SeriesITEM NO.:

C-3.Master/Slave ModeChoose any one light as the master for attaining auto online function,the operations are as below:firstly,set the address of master as 001,others are set as slave(address can be any one except 001); Change function

ylsuonorhcnys krow lliw sthgil lla neht,thgil )100(retsam eht f ;o

C-4.When pressing button,please wait for about 10 sec,then you can exit the mode of adjustment function,the digital LED stop flashing and data recorded.

D.Photometric ParametersD-1. Cadela Distribution

LWW-5-36P

X refer to functions(the value between 1 to C),Y refer to value of speed and gray degree for the functions(the value between 1 to 9).

Function and parameter sheet:

1-9 class gray degree1-9 class speed1-9 class speed1-9 class speed1-9 class speed1-9 times circle

B-multicolor flashingC-autorun

A-multicolor fading9-single fading8-multicolor changing7-static white

X value Y value1-9 class gray degree1-9 class gray degree1-9 class gray degree1-9 class gray degree1-9 class gray degree1-9 class gray degree6-static cyan

5-static purple4-static blue3-static yellow2-static green1-static red

Y valueX value

X référence à des fonctions (la valeur entre 1 et C), Y se référer à la valeur de la vitesse et le degré de gris pour les fonctions (valeur entre 1 et 9).

Choisissez une quelconque lumière en tant que maître pour atteindre la fonction automatique de ligne,les opérations sont les suivantes:premièrement, définir la adresse du maître comme 001,d'autres sont définies comme esclave (adresse peut être l'un quelconque sauf 001); la fonction de changement de la maître (001) de lumière, puis toutes les lumières ne fonctionnent de manière synchrone;

Lorsque appuyant sur le bouton, s'il vous plaît patienter pendant environ 10 secondes, puis vous pouvezquitter le mode de la fonction de réglage, le numérique LED cesse de clignoter et les données enregistrées.

LED WALL WASHER C-2.Independent ModeAfter pressing A four times(the first three times is the setup on DMX address)or B directly,light enter into independent mode;the digital LEDs shows PXY,press A once,active digital LEDs moves backward,you can choose function via X and parameter via Y;Press B, the corresponding flash digital LED increase one bit(range: 1~9)Après avoir appuyé sur A quatre reprises (les trois premières fois est la configuration de l'adresse DMX) ou B directement,lumière entrer dans le mode indépendant;les voyants numériques montrent PXY,appuyez une fois,les LED numériques actifs se déplacent vers l'arrière,vous pouvez choisir la fonction via le X et le paramètre parY;augmentations Appuyez sur B,le numérique de flash LED correspondante un peu (de 1 à 9).

0

30

60

90-90

-60

-30

Unit :cdV 0.0 Deg plan ,21.3H 0.0 Deg plan ,22.4

Average beam angle

0

1200

2400

3600

4800

6000

RGB

0

30

60

90-90

-60

-30

Unit :cdV 0.0 Deg plan,18.7H 0.0 Deg plan,20.2

Average beam angle

0

400

800

1200

1600

2000

Red

(50%):21.8deg (50%):19.4deg

Page 3: LED WALL WASHER - g2glighting.com · INSTRUCTION OF LED WALL WASHER LED WALL WASHER This product is mainly used for decorating and highlighting in building frame, garden, etc. It

G2GLWW-5 SeriesITEM NO.:

1m3.281ft

15.97cm0.5239ft

1512,2142lx140.5,199.0fc

2m6.562ft

31.94cm1.048ft

378.0,535.6lx35.11,49.76fc

3m9.843ft

47.91cm1.572ft

168.0,238.0lx15.61,22.11fc

4m13.12ft

63.88cm2.096ft

94.49,133.9lx8.779,12.44fc

5m16.4ft

79.85cm2.62ft

60.48,85.69lx5.618,7.961fc

Height Eavg,Emax DiameterAngle:9.13deg

Flux out:36.36 lm

.

Note:The curve is illuminance area under different projection distance and the average illuminance inthe area.

Blue

E.Dimension Drawing

1m3.281ft

18.52cm0.6076ft

18006,24824lx1673,2306fc

2m6.562ft

37.04cm1.215ft

4501,6206lx418.2,576.6fc

3m9.843ft

55.56cm1.823ft

2001,2758lx185.9,256.2fc

4m13.12ft

74.08cm2.43ft

1125,1552lx104.5,144.1fc

5m16.4ft

92.60cm3.038ft

720.2,993.0lx66.91,92.25fc

Angle:10.58deg

Flux out:524.5 lm

Note:The curve is illuminance area under different projection distance and the average illuminance inthe area.

D-2.Illuminance At A Distance

1m3.281ft

11.18cm0.3668ft

6799,9476lx631.6,880.4fc

2m6.562ft

22.36cm0.7337ft

1700,2369lx157.9,220.1fc

3m9.843ft

33.54cm1.101ft

755.4,1053lx70.18,97.82fc

4m13.12ft

44.73cm1.467ft

424.9,592.3lx39.48,55.02fc

5m16.4ft

55.91cm1.834ft

271.9,379.0lx25.26,35.21fc

Height Eavg,Emax DiameterAngle:6.40deg

Flux out:79.90 lm:

.

1m3.281ft

13.69cm0.4491ft

15775,21425lx

1466,1990fc

2m6.562ft

27.37cm0.8981ft

3944,5356lx366.4,497.6fc

3m9.843ft

41.06cm1.347ft

1753,2381lx162.8,221.2fc

4m13.12ft

54.75cm1.796ft

985.9,1339lx

91.59,124.4fc

5m16.4ft

68.44cm2.245ft

631.0,857.0lx58.62,79.62fc

Height Eavg,Emax DiameterAngle:7.83deg

Flux out:242.3 lm

.Note:The curve is illuminance area under different projection distance and the average illuminance inthe area.

Note:The curve is illuminance area under different projection distance and the average illuminance inthe area.

1m3.281ft

15.72cm0.5159ft

7743,10366lx719.4,963.0fc

2m6.562ft

31.45cm1.032ft

1936,2592lx179.8,240.8fc

3m9.843ft

47.17cm1.548ft

860.3,1152lx79.93,107.0fc

4m13.12ft

62.89cm2.063ft

483.9,647.9lx44.96,60.19fc

5m16.4ft

78.62cm2.579ft

309.7,414.6lx28.77,38.52fc

Height Eavg,Emax DiameterAngle:8.99deg

Flux out:150.7 lm

Note:The curve is illuminance area under different projection distance and the average illuminance inthe area.

RGB Red Green

LED WALL WASHER

LWW-5-36P

White

78

140

142

70Side Mounting

Bottom Mounting

305/575/610/1115/1220

305/575/610/1115/1220

0

30

60

90-90

-60

-30

Unit :cdV 0.0 Deg plan ,22.9H 0.0 Deg plan ,23.6

Average beam angle(50%):23.2deg

0

700

1400

2100

2800

3500

Green

0

30

60

90-90

-60

-30

Unit :cdV 0.0 Deg plan ,22.0H 0.0 Deg plan ,22.9

Average beam angle(50%):22.5deg

0

110

220

330

440

550

Blue

Page 4: LED WALL WASHER - g2glighting.com · INSTRUCTION OF LED WALL WASHER LED WALL WASHER This product is mainly used for decorating and highlighting in building frame, garden, etc. It

G2GLWW-5 SeriesITEM NO.:

Note: The above instruction are subject to update or improved without notice.Pls turn to our staff for further details ! Thanks for your long term support !

1.Do not plug them into power when the product is still in package;2.Don't use anything to cover the fixture during application;3.Don't use this product in close environment;4.If this product appears to be damaged, do not attempt

any repair, please contact your dealer.

* Neglect on action of the above treatment will lead to failure of waterproof and properworking of the lights!!!

* Make sure the ground connection well avoid electric shock, due to metal housing.

1. Ne pas les brancher au pouvoir lorsque le produit est toujours en emballage;

2. Ne pas utiliser quoi que ce soit pour couvrir l'appareil lors de l'application;

3. Ne pas utiliser ce produit en étroite environnement;4. Si ce produit semble endommagé,n'essayez pas

toute réparation,s'il vous plaît contactez votre revendeur.

* Négligence sur l'action du traitement ci-dessus conduira à l'échec de imperméable et bon travail des lumières!

* Assurez-vous que la connexion à la terre et éviter choc électrique,grâce à un boîtier métallique.

Caution:

Caution:

F. Installation Drawing: Fix the brackets via M4 tapping screw,mounting size as below:Fixer les supports via M4 Vis Parker, la taille de montage ci-dessous:

LED WALL WASHER

Bottom&Side Mounting

R3.25

35 41

50

20

68 46

8.2

Bottom Mounting