M36 My White LED Direct [L36-TW] selux · LED Direct Light Engine ... LED Optimized white lens MI...

of 10 (Rev. 04/2016)

M36MYWHITE_LED Direct_v1.04In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Project:

Type: Qty:

Date: Customer:

M36 My WhiteLED Direct

Custom colors are available, please consult Factory

Order Code: - - - - - - - -

Dimming Options

DMD eldoLED DALI (Logarithmic)

DMX eldoLED DMX(Linear)

DL3 Damp Location Rated

FS3 In-line Fuse

Fixture Options

-

Individual fixtures and runs are supplied in nominal lengths to ensure full, even, illumination. See pages 2 thru 6 for additional details.

3See page 8 for full details and restrictionsSS3 Separate Switching

Emergency Options

4See page 8 for full details and restrictionsEC4 Emergency Circuit Wiring

Series L36 M36 LED Direct

Light Engine 1A321 695 lm/9.95W per foot

CCT

Shielding LW LED Optimized white lens

MI Clear Lensw/microprism

NB LMO Symmetric

A2 LMO Asymmetric 20° Wall Washer

BW LMO Batwing

Mounting FF2 Surface Mount (w/Flex Whip)

C Cable

S Swivel Stem

RS Rigid Stem

W Wall Mount

Nominal Fixture Length

02 2 ft.

04 4 ft.

03 3 ft.

05 5 ft.

06 6 ft.

08 8 ft.

07 7 ft.

XX Runs (over 12’), round up to the nearest foot and replace the “xx” with the # (i.e. 13=13’ nominal)

Finish WH White

BK Black

SV Silver

SP Specify Premium Color

Voltage 120120 Volt

277277 Volt

L36

1A32

LED WARRANTY

5YEAR ARRA

CompliantADA

Compliant

L36 1A32

TW Tunable White - 2700K thru 6500K

F22 Surface Mount (w/ 2x4 J-Box cover)

F42 Surface Mount (w/4x4 J-Box cover)

2 Over 8’ supplied with 2 or more housings that are joined in the field.

09 9 ft.

11 11 ft.

10 10 ft.

12 12 ft.

UNV120 thru 277 50/60hz capable

A5 LMO Asymmetric 5° Wall Grazer

TW

TW

1 Values calculated from a 4’ fixture with CLL using LW Shielding and DMD driver. For additional information please see page 2.

ApprovalsProduct Modifications Please list modification requirements for review by factory:

Date:

of 10 (Rev. 04/2016)

M36MYWHITE_LED Direct_v1.04

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.


Construction:

Housing - Continuous, low copper 6063-T6 extruded aluminum profile with aluminum end-caps, available as Individual fixtures (up to 12’) or Runs.

Geartray - Low copper 6063-T6 extruded alu-minum profile.

Shielding - Extruded, impact resistant acrylic lens:- LED optimized white lens (LW)- Clear lens with microprism inlay (MI)- “LMO” symmetric lens (NB)- “LMO” Asymmetric 5° wall grazer (A5)- “LMO” Asymmetric 20° wall washer (A2)- “LMO” Batwing (BW)As a result of the color mixing LEDs, LW lens is recommended for the most uniform illumina-tion, other lenses may allow the separation of colors to be visible

Mounting(s) - 1/16” Aircraft Cable, Ø1/2” Swivel or Rigid Steel Stem, Wall Bracket, Surface mounting (see pages 3 thru 6 for details).** Cable, Stem and Wall mountings may not be symmetrical for Runs and Configurations due to the use of modular housing lengths. If sym-metrical suspensions are required please consult the factory.

Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. Runs are available in approximately 1’ increments starting at the nominal 12’ fixture length. ** Individual luminaires are not joinable in the field.

Exact length luminaires - Individual lumi-naires and runs are available in exact lengths to meet your project needs. Please consult factory with your requirements. ** Lens luminance may soften at the very ends of the straight sections for exact length lumi-naires.

M36 Joiner(s) - Runs are supplied with multiple housings that are joined together in the field using the supplied M36 Joiner System. This allows ease of installation and ensures a uniform appearance (see page 8 for detail).

Electrical/Performance:

Constant Lumen Level (CLL) Curve – Selux recommends utilizing the Constant Lumen Level (CLL) curve for the MyWhite product. This is achieved using an algorithm programmed into the controls for driving the two channels of the driver simultaneously so that while adjusting the CCT, the lumen output remains the same. For recommended controls for CLL, please consult Selux.

Max Output – An alternate way to control the output is by having each channel of the driver controlled individually while changing the CCT. Controlling the channels individually can result in a higher lumen level (see chart on Photom-etry page).

LED Light Engine – Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 94% at 25,000 hours and 86% at 60,000 hours per TM-21 report (based on CLL); 86% at 25,000 hours and 73% at 50,000 hours (based on max output).

LED Life – Calculated L70 greater than 140,000 hours and Reported L70 greater than 60,000 hours at 25°C per TM-21 (for CLL); Reported L70 of 58,000 hours at 25°C per TM-21 (for max output).

Delivered Lumens - Due to LED manufacturer’s tolerances the listed output has a ±5% toler-ance. For outputs based on different shielding please see photometry section at the end.

CCT - Tunable CCT from 2700K thru 6500K, tolerance within a 3-step MacAdam ellipse.

CRI - Min. 80

Driver - High efficiency, constant current, soft start, Electronic Class 2 with a PFC>0.90. For more detailed information on the available driv-ers please see page 7.

Wall Controller - Optional wall controller can be ordered for use with DMX fixtures. See DMX controller spec sheet for more details.

Thermal Performance:

Ambient Operating Temperature - Luminaires suitable for Max. ambient temperature of 35° C (95° F). Min. ambient temperature of -20° C (-4° F).

Luminaire Finish:

Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI.

All products undergo a five stage intensive pre-treatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and hu-midity resistance as well as ultraviolet resistance for color retention.

Standard interior colors are White (WH), Black (BK), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.

Warranty:

5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M36 MyWhite LED luminaire shall be free from defects in mate-rial and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see “Selux Terms and Condition of Sale.”

Certifications and Compliance: NRTL - For Dry and Damp location (I.E. cULus; cCSAus)ADA CompliantARRA CompliantRoHS Compliant


2 13/16” (72mm)

1 5/16” (34mm)

1 7/16” (37mm)

of 10 (Rev. 04/2016)




“E”

Cable Mounting (C)


Outlet box for feed only (by others)

L36 Cable (C) Suspension Detail (Feed location(s) only)

L36 Cable (C) Suspension Detail (Non-Feed location(s) only)

Cross bar with 1/4-20 rod and ground screw

1/4” x 5” diameter canopy (white)

2x White cable stay

Cord strain relief bushing

Chrome gripper

1/4”- 20 Threaded Rod (supplied & installed in the field by others)

1. Ø 1/16” Aircraft Cable with chrome gripper for easy adjustment (48” max. from ceiling to luminaire).

2x Outlet box screws (by others)

1/4-20 Slip ring coupler

Feed cord (white)

1/16” Aircraft cable

Luminaire



Chrome gripper

Luminaire

1/4” x 2” diameter Canopy (white)

Cable Mounting (C) - Dimensions

Nominal Length

“A” Housing Length

* “B” (Ref.) End Suspensions

“C” Mid. Suspension

“D” Power Feed Location

“E” DMX In/Out

Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM

02 (2 ft.) 2' - 1/4" 616 0' - 2 1/8" 54 1'- 8 1/16" 509 0' - 1 1/8" 29 0' - 1 1/8" 29

03 (3 ft.) 3' - 5/16" 923 0' - 3 1/8" 79 2'- 6 1/16" 764 0' - 2 1/8" 54 0' - 2 1/8" 54

04 (4 ft.) 4' - 1/4" 1225 0' - 3 1/8" 79 3'- 6" 1067 0' - 2 1/8" 54 0' - 2 1/8" 54

05 (5 ft.) 4' - 10 11/16" 1491 0' - 3 1/8" 79 4'- 4 7/16" 1332 0' - 2 1/8" 54 0' - 2 1/8" 54

06 (6 ft.) 5' - 10 5/8" 1794 0' - 3 1/8" 79 5'- 4 7/16" 1636 0' - 2 1/8" 54 0' - 2 1/8" 54

07 (7 ft.) 7' - 1/4" 2140 0' - 3 1/8" 79 6'- 6" 1981 0' - 2 1/8" 54 0' - 2 1/8" 54

08 (8 ft.) 8' - 1/4" 2444 0' - 3 1/8" 79 7'- 6" 2286 0' - 2 1/8" 54 0' - 2 1/8" 54

09 (9 ft.) 8' - 10 5/8" 2709 0' - 3 1/8" 79 8'- 4 7/16" 2551 0' - 2 1/8" 54 0' - 2 1/8" 54

10 (10 ft.) 9' - 10 5/8" 3013 0' - 3 1/8" 79 9'- 4 3/8" 2854 0' - 2 1/8" 54 0' - 2 1/8" 54

11 (11 ft.) 11' - 3/16" 3358 0' - 3 1/8" 79 10 - 6" 3200 0' - 2 1/8" 54 0' - 2 1/8" 54

12 (12 ft.) 12' - 3/16" 3662 0' - 3 1/8" 79 11'- 5 15/16" 3503 0' - 2 1/8" 54 0' - 2 1/8" 54

*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.

Cable Mounting (C)

Outlet box for feed only (by others)

Cross bar with 1/4-20 rod and ground screw


2x White cable stay

Cable Grommet

Chrome gripper

2x Outlet box screws (by others)



Outlet box for feed only.(By Others)Cross bar w/ 1/4-20rod and ground screw

1/4" x 5" dia. canopy.(White)Cable Grommet1/4-20 Slipring couplerDMX Cables (White)1/16" Aircraft cable2x White cable stayChrome gripperLuminaire

2x Outlet box screws(by others)

Cable Grommet

DMX cables (white)

Cable Grommet

Luminaire

L60 Cable (C) Suspension Detail (DMX Feed location(s) only)

Min. 5/8” to Max. 3/4”

of 10 (Rev. 04/2016)





“E”

Stem Mounting (S & RS)

Outlet box (supplied & installed by others)

L36 Swivel Stem (S) Suspension Detail (feed wires through stem supplied by Selux)

L36 Rigid Stem (RS) Suspension Detail (feed wires through stem supplied by Selux)

Hemispherical assembly

Swivel crossbar with ground screw


1. Ø 1/2” Swivel Stem provides 45° swivel and can be cut in field (48” max. from ceiling to luminaire).

2. Ø 1/2” Rigid Stem is fixed and is not able to be cut/adjusted in field (48” max. from ceiling to luminaire). If the project requires different lengths than above, please consult the factory.

Cotter pin

1/4 IP steel swivel stem (white)

3/8 Male x 1/4 Male hex bushing

Luminaire Luminaire

Outlet box (supplied & installed by others)

1/4 IP Crossbar with ground screw

1/4 IP Hex nut


Canopy securing screw (white)

1/4 IP Steel rigid stem (white)

3/8 Male x 1/4 Male hex bushing

Swivel (S) & Rigid Stem (RS) Mountings - Dimensions

Nominal Length





“E” DMX In/Out


02 (2 ft.) 2'- 1/4" 616 0' - 2 1/8" 54 1'- 8 1/16" 509 0' - 2 1/8" 54 0' - 2 1/8" 54

03 (3 ft.) 3'- 5/16" 923 0' - 3 1/8" 79 2'- 6 1/16" 764 0' - 3 1/8" 79 0' - 3 1/8" 79

04 (4 ft.) 4'- 1/4" 1225 0' - 3 1/8" 79 3'- 6" 1067 0' - 3 1/8" 79 0' - 3 1/8" 79

05 (5 ft.) 4'- 10 11/16" 1491 0' - 3 1/8" 79 4'- 4 7/16" 1332 0' - 3 1/8" 79 0' - 3 1/8" 79

06 (6 ft.) 5'- 10 5/8" 1794 0' - 3 1/8" 79 5'- 4 7/16" 1636 0' - 3 1/8" 79 0' - 3 1/8" 79

07 (7 ft.) 7’- 1/4" 2140 0' - 3 1/8" 79 6'- 6" 1981 0' - 3 1/8" 79 0' - 3 1/8" 79

08 (8 ft.) 8'- 1/4" 2444 0' - 3 1/8" 79 7'- 6" 2286 0' - 3 1/8" 79 0' - 3 1/8" 79

09 (9 ft.) 8'- 10 5/8" 2709 0' - 3 1/8" 79 8'- 4 7/16" 2551 0' - 3 1/8" 79 0' - 3 1/8" 79

10 (10 ft.) 9'- 10 5/8" 3013 0' - 3 1/8" 79 9'- 4 3/8" 2854 0' - 3 1/8" 79 0' - 3 1/8" 79

11 (11 ft.) 11'- 3/16" 3358 0' - 3 1/8" 79 10 - 6" 3200 0' - 3 1/8" 79 0' - 3 1/8" 79

12 (12 ft.) 12'-3/16" 3662 0' - 3 1/8" 79 11'- 5 15/16" 3503 0' - 3 1/8" 79 0' - 3 1/8" 79


Stem Mounting (S & RS)

of 10 (Rev. 04/2016)





“E”

Wall Mounting (W)

1. Aluminum wall bracket (by Selux)2. 2” x 4” J-Box at feed location (supplied and installed by others).3. 1/4-20 Threaded rod, 1/4-20 lock washer and 1/4-20 nut required to

anchor the wall bracket. Mounting hardware supplied and installed to code by others.

Wall Mount (W) (Covers a 2x4 J-Box only)

Wall (W) Mount - Dimensions

Nominal Length





“E” DMX In/Out


02 (2 ft.) 2' - 1/4" 616 0' - 3 1/8" 79 1' - 6 1/16" 458 0' - 3 1/8" 79 0' - 3 1/8" 79

03 (3 ft.) 3' - 5/16" 923 0' - 6 1/8" 156 2' - 1/8" 612 0' - 6 1/8" 156 0' - 6 1/8" 156

04 (4 ft.) 4' - 1/4" 1225 0' - 6 1/8" 156 3' - 0" 914 0' - 6 1/8" 156 0' - 6 1/8" 156

05 (5 ft.) 4' - 10 11/16" 1491 0' - 6 1/8" 156 3' - 10 7/16" 1180 0' - 6 1/8" 156 0' - 6 1/8" 156

06 (6 ft.) 5' - 10 5/8" 1794 0' - 6 1/8" 156 4' - 10 7/16" 1484 0' - 6 1/8" 156 0' - 6 1/8" 156

07 (7 ft.) 7' - 1/4" 2140 0' - 6 1/8" 156 6' - 0" 1829 0' - 6 1/8" 156 0' - 6 1/8" 156

08 (8 ft.) 8' - 1/4" 2444 0' - 6 1/8" 156 7' - 0" 2133 0' - 6 1/8" 156 0' - 6 1/8" 156

09 (9 ft.) 8' - 10 5/8" 2709 0' - 6 1/8" 156 7' - 10 7/16" 2398 0' - 6 1/8" 156 0' - 6 1/8" 156

10 (10 ft.) 9' - 10 5/8" 3013 0' - 6 1/8" 156 8' - 10 3/8" 2702 0' - 6 1/8" 156 0' - 6 1/8" 156

11 (11 ft.) 11' - 3/16" 3358 0' - 6 1/8" 156 9' - 11 15/16" 3047 0' - 6 1/8" 156 0' - 6 1/8" 156

12 (12 ft.) 12' - 3/16" 3662 0' - 6 1/8" 156 10' - 11 7/8" 3350 0' - 6 1/8" 156 0' - 6 1/8" 156


2 3/4” (70mm)

4” (102mm)

1” (25mm)

2 7/16” (62mm)

of 10 (Rev. 04/2016)





2

“E” “E”

Surface Mounting (FF, F2 & F4) - 2’ to 8’

1. 6’ Flex Whip2. Ø 5/16” Mounting hole drilled at the factory(mounting hardware to code by others).3. 2”x 4” J-Box at feed location (supplied and installed by others).4. 2”x 4” J-Box cover (by Selux).5. 4”x 4” J-Box at feed location (supplied and installed by others).6. 4”x 4” J-Box cover (by Selux).

Surface Mount (FF)* (with Flex Whip)

Surface Mounting (FF, F2 & F4) - Over 9’

Surface Mount (F2) (with 2x4 J-Box cover)

Surface Mount (F4) (with 4x4 J-Box cover)

* Please note: Fixture does not cover a J-Box.

Surface Mount (FF, F2, & F4) - Dimensions

Nominal Length



* “B1” End Suspensions


“C1” Mid. Suspension

“C2” Mid. Suspension


“E” DMX In/Out

Feet/Inch

MM Feet/Inch

MM Feet/Inch

MM Feet/Inch

MM Feet/Inch

MM Feet/Inch

MM Feet/Inch MM Feet/Inch MM

02 (2 ft.) 2' - 1/4" 616 0' - 1 5/8" 41 N/A 1' - 9" 534 N/A N/A 0' - 4 1/8" 105 0' - 4 1/8" 105

03 (3 ft.) 3' - 5/16" 923 0' - 6 1/8" 156 N/A 2' - 1/8" 612 N/A N/A 0' - 2 1/8" 54 0' - 2 1/8" 54

04 (4 ft.) 4' - 1/4" 1225 0' - 6 1/8" 156 N/A 2’ 914 N/A N/A 0' - 2 1/8" 54 0' - 2 1/8" 54

05 (5 ft.) 4' - 10 11/16"

14910' - 6 1/8" 156 N/A

3' - 10 7/16"

1180 N/A N/A 0' - 2 1/8" 54 0' - 2 1/8" 54

06 (6 ft.) 5' - 10 5/8"

17940' - 6 1/8" 156 N/A 3' 914

1' - 10 3/8"

569 N/A 0' - 2 1/8" 54 0' - 2 1/8" 54

07 (7 ft.) 7' - 1/4" 2140 0' - 6 1/8" 156 N/A 3' 914 3' 914 N/A 0' - 2 1/8" 54 0' - 2 1/8" 54

08 (8 ft.) 8' - 1/4" 2444 0' - 6 1/8" 156 N/A 3' 914 4' 1219 N/A 0' - 2 1/8" 54 0' - 2 1/8" 54

09 (9 ft.) 8' - 10 5/8"

27090' - 6 1/8" 156 6” 153

3' - 10 7/16"

1180 N/A 3' 914 0' - 2 1/8" 54 0' - 2 1/8" 54

10 (10 ft.) 9' - 10 5/8"

30130' - 6 1/8" 156 6” 153 3' 914

1' - 10 3/8"

569 3' 914 0' - 2 1/8" 54 0' - 2 1/8" 54

11 (11 ft.) 11' - 3/16" 3358 0' - 6 1/8" 156 6” 153 3' 914 3' 914 3' 914 0' - 2 1/8" 54 0' - 2 1/8" 54

12 (12 ft.) 12' - 3/16"

36620' - 6 1/8" 156 6” 153 3' 914 4' 1219 3' 914 0' - 2 1/8" 54 0' - 2 1/8" 54


of 10 (Rev. 04/2016)





eldoLED Dimming Driver:

eldoLED DALI dimming (DMD) Luminaires supplied with DUALdrive DALI dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory. Max. inrush current per driver 30mA²s. *For control recommendation for eldoLED drivers, please contact eldoLED.

Wiring Diagrams

Driver Quantity

2 ft. 3 ft. 4 ft. 5 ft. 6 ft. 7 ft. 8 ft. 9 ft. 10 ft. 11 ft. 12 ft. RUN

DMD or DMX driver 1 1 1 2 2 2 2 3 3 3 3 Approximately 1 drivers per 4 ft.

eldo DMX dimming (DMX) Luminaires supplied with POWERdrive DMX dimming driver for linear dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory. Max. inrush current per driver 30mA(squared)s. Selux recommends a maximum of 31 drivers in a DMX universe. DMX fixtures can be daisy chained together (remove the terminating resistor at the end of the fixture and connect the DMX cable from the next fixture).

DALI Logarithmic (DMD)

DMD

of 10 (Rev. 04/2016)




Wiring DiagramsDMX dimming (DMX)

DMX CABLE

TERMINATION RESISTOR

HOUSING, MIDHOUSING, END

HOUSING, INDIVIDUAL/START

DMX FEED1

2POWER FEED

BLACK

WHITE

GREEN

TERMINATION RESISTOR

DMX FEEDPOWER FEED

WHEN DAISY CHANING FIXTURES, REMOVE TERMINATION RESISTOR AND CONNECT DMX

OUT CABLE

4BLACK

WHITE

GREEN

When Daisy Chaning fixtures, remove termination resistor and connect DMX out cable

BARE - SHIELD

BLACK - DMX NEGATIVE

WHITE - DMX POSITIVE

BLACK

WHITE

BARE

3 POSITION MALE CONNECTOR 28-12 GA 300V 10A

BARE

WHITE

BLACK

3 POSITION FEMALE CONNECTOR 28-12 GA 300V 10A

BLACK WHITE BARE

4 POSITION MALE CONNECTOR 24-14GA 300V 10A

BARE WHITE BLACK

4 POSITION FEMALE CONNECTOR 24-14GA 300V 10A

21

3

43

2 1 12

4

4

3

3

34

21


of 10 (Rev. 04/2016)





Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the hot wire for each feed. (supplied with an 8A slow burn fuse).

Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings. All solder points on LED boards are conformal coated. The phosphor layer of the LEDs is free of coating to avoid hazing.

90° Elbow on top of the housing (7/8" feed hole)

3/8" flexible metal conduit (6' long)

6" leads

Straight fitting

Flex Whip - standard for FF mounting

Joiner System - standard for Runs

Fixture extrusion

Joiner extrusion

Recommended #2 Phillips drive

Fixture extrusion

Additionalview

Separate Switching (SS) - Luminaires available with separately switched 4’ (nominal) sections starting at 7’ and up. Luminaire is intended to be wired to the same panel/breaker (not intended for Emergency use).

- To specify this option, the number of separately switched sections and locations of these sections must be provided at time of order.

*If the project requires different separate switching than outlined above please consult the factory.

Emergency Circuit (EC) - Luminaires with EC option compliant to UL 924 listed emergency luminaire. EC luminaires are intended to be wired to separate panels/breakers for emergency use.

- For 1’ to 6’ nominal luminaires, the entire fixture is wired for operation on emergency circuit.

- For 7’ and up nominal luminaires, the first 4’ nominal length is wired for operation by a separate EM circuit by default to meet the required “Life Safety Code” (NFPA 101).

**If a different configuration is needed please consult the factory.

of 10 (Rev. 04/2016)





Photometry

262

523

785

1046

1

2

Maximum Candela = 1046.347 Located At Horizontal Angle = 0, Vertical Angle = 1# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)

LW Optics / 32W LED / CLO

Catalog #: L36-1A32-TW-LW-X-04-WH-120 Report #: 1171435-40CLL Delievered Lumens: 2776 Input Watts: 38.86WEfficacy: 70 Power Factor: 0.977 Total Harmonic Distortion: 5.11% CCT: 2700-6500KCRI: 84.2Max Candela: 1046.347 @ 1° from VerticalSpacing Criterion (0-180): 1.26 Spacing Criterion (90-270): 1.22 Spacing Criterion (Diagonal): 1.34

Link to photometry (IES & PDF files)

This photometry can be used for all CCTs when utilizing the constant lumen level (CLL) curve for My White. For other outputs, please consult the factory.

My White and the Circadian Rhythm – Humans have an internal clock that affects everything from sleep patterns to productivity to health. This clock is called the circadian rhythm. As humans evolved in the days before electric lighting, they had natural exposure to various levels (both color temperature and intensity) from the sun. By adjusting electric lighting to mimic the natural hue and intensity of the sun, it can help restore the body to a natural state. Various studies have shown that this can help with alertness, behavioral issues, and productivity. The Selux proprietary My White technology allows you to adjust both the amount and color of your light, creating a comfortable environment for offices, educational facilities, hospitality, or any other installation where varying light could benefit the occupants. Set up the My White luminaires to a whole building solution, and you could create an automatic adjustment to the light to mimic daylight.

2700K 6500KCCT

CONSTANT LUMEN LEVEL

LUMEN OUTPUT BASED ON CONTROL SETTINGS

MAX OUTPUT LEVEL

RECOMMENDED AREA OF OPERATION (CONSTANT LUMEN LEVEL [CLL] SETTINGS)

ADDITIONAL LUMEN ADJUSTABILITY USING MAX OUTPUT CURVEResults may fluctuate when fixture is used outside of the Constant Lumen Level curve.

Driver may limit output above this line

M36 My White LED Direct [L36-TW] selux · LED Direct Light Engine ... LED Optimized white lens MI...

Documents

Transcript of M36 My White LED Direct [L36-TW] selux · LED Direct Light Engine ... LED Optimized white lens MI...