Latest Additions in IRC Library

1

LATEST ADDITION IN IRC LIBRARY

S.NO. DESIGNATION NAME OF THE TITLE

1. Indian Technical Textile Association (ITTA)

Handbook on “Geosynthetics Case Studies of ITTA Members”, 2013

2. R.K. Srivastava Study of Rigid Pavement For Village Roads in Alluvial Regions: A Thesis

3. AASHTO Roadside Design Guide, 4th Revision, 2011

4. AASHTO Guide For Development of Rest Areas on Major Arterials and Freeways

5. AASHTO A Policy on Geometric Design of Highways & Streets

6. AASHTO R 36-12 : Standard Practice For Evaluating Faulting of Concrete Pavements

7. AASHTO M 249-12 : Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)

8. AASHTO T 283-07 : Standard Method Test for Resistance of Compacted Hot Mix Asphalt (HMA) to Moisture-Induced Damage, 2011

9. AASHTO T 246-97 : Standard Method of Test For Resistance to Plastic Flow of Bituminous Mixtures Using Marshal Apparatus

10. AASHTO M 325-8 : Standard Specification for Stone Matrix Asphalt (SMA)

11. Jean Deloche The Ancient Bridges of India

12. John Reas The UK National Annex to BS EN 1991-1-4

13. John Reas BS EN 1991-1-5

14. John Reas PD 6688-1-4

15. Hari Babu Kausal Sangah Rajbhasha (Hindi)

16. Manna Narayan Office Assistant (Hindi)

17. IS:4326-2013 Earthquake Resistant Design and Construction of Buildings – Code of Practice (3rd Revision)

18. IS:3812 (Pt.1)-2013 Pulverized Fuel Ash-Specification Part 1: For Use as Pozzolana in Cement

19. IS:3812 (Pt.2)-2013 Pulverized Fuel Ash Specification Part 2 For Use as Admixture in Cement Mortar & Concrete

20. MoRT&H AIS:125 : Constructional and Functional Requirements for Road Ambulances

21. Prof. DR. N.S. Srinivasan Taking the High Road Research in Transport in Developing Economies (1955-2013)

22. S.K. Khanna, CEG Justo & A. Veeraragavan

Highway Engineering, Rev. 10th, 2014

23. Transportation Research Record (TRB)

2270 – Environment 2012


2271 – Sustainable Practices, Performance Measures, and Management


2272 – Maintenance Services and Surface Weather 2012


2274 – Transit Vol.1 2012 Thomas B. Deen Distinguished Lecture


2275 – Transit 2012 Vol.2

2


2276 – Transit 2012 Vol.3


2277 – Transit 2012 Vol. 4


2278 – Freeway Operations; Regional Systems Management and Operations; Managed Lanes 2012


2285 – Travel Survey Methods, freight Data Systems, and Asset Management 2012


2286 – Highway Capacity and Quality of Service 2012


2287 – Energy and Global climate change 2012


2288 – Freight Systems 2012


2289 – Railway 2012


2290 – Concrete Materials 2012


2291 – Information Systems, Geographic Information Systems, and Advanced Computing 2012


2292 – Maintenance and Preservation 2012


2293 – Asphalt Materials and Mixtures 2012 Vol. 1


2294 – Asphalt Materials and Mixtures 2012 Vol.2






2298 – Traffic Control Devices, Visibility, and Highway-Rail Grade Crossings 2012


2299 – Pedestrians 2012


2301 – Operational Effects of Geometrics and Access Management 2012


2302 – Travel Demand Forecasting 2012 Vol.1


2303 – Travel Demand Forecasting 2012 Vol.2


2305 – Pavement Management 2012 Vol.2


2306 – Pavement Management 2012 Vol.3


2308 – Urban and Traffic Data Systems, 2012


2309 – Highway Design 2012

3

52. Tra53.nsportation Research Record (TRB)

2310 – Soil Mechanics 2012


2311 – Traffic Signal Systems 2012


2312 – Roundabouts and Emergency Evacuation 2012


2313 – Structures 2012


2314 – Bicyles 2012


2315 – Traffic Flow Theory and Characteristics 2012


2318 – Safety Management, Emergency Management Systems, Operator Education, School Transportation, and Older Drivers 2012


2319 – Demand Management and Carsharing 2012


2321 – Human Performance, User Information, and Simulation 2012


2322 – Travel Behavior 2012 Vol.1


2323 – Travel Behavior 2012 Vol.2


2326 – Marine environment, safety, and human factors, 2013


2327 – School Transportation; Operator education and regulation; and traffic law enforcement 2013


2328 – Research and education


2329 – Winter maintenance and preservation, 2013


2330 – Marine Transportation and Terminal Operations 2013


2331 – Structures 2013 Vol1


2332 – Vol. 2 - Structures 2013


2333 – Network Modeling 2013


2335 – Geomaterials 2013


2336 – Aviation 2013


2338 – Urban and Traffic Data Systems 2013 Vol.1


2340 – Air Quality 2013 Vol1


2342 – Concrete Materials 2013

4


2343 – Travel Demand Forecasting 2013


2345 – Vol.1 – Policy 2013: Finance, Economics, and equity considerations


2348 – Operational effects of geometrics and access management 2013


2350 – Transit, Vol.1, 2013


2353 – Vol. 4 - Transit 2013


2354 – Travel Surveys: Asset Management; and freight data 2013


2355 – Vol.1 – Traffic Signal Systems 2013


2361 – Vol.2 – Maintenance and Preservation 2013


2365 – Human Performance; User Information; and simulation 2013


2367 Vol.2 – Pavement Management


2377 – Roadside Safety Design, 2013


2378 – Freight Modeling and Logistics, 2013

88. NCHRP Report (TRB) 760 – Improving the quality of motorcycle travel data collection

89. NCHRP Report (TRB) 757 – Long-term performance of epoxy adhesive anchor systems

90. NCHRP Report (TRB) 756 – Highway safety research agenda: Infrastructure and Operations

91. NCHRP Report (TRB) 754 – Improving management of transportation information

92. NCHRP Report (TRB) 750 – Vol. 3 – Expediting future technologies for enhancing transportation system performance

93. NCHRP Report (TRB) 747 – Guide for conducting forensic investigations of highway pavements

94. NCHRP Report (TRB) 755 – Comprehensive costs of highway-rail grade crossing crashes

95. NCHRP Report (TRB) 753 – A pre-event recovery planning guide for transportation

96. NCHRP Report (TRB) 748 - Guidelines for the Use of Mobile LIDAR in Transportation Applications

97. NCHRP Report (TRB) 743 – Predicting the Initial Retroreflectivity of Pavement Markings from Glass Bead Quality

98. NCHRP Report (TRB) 742 – Communicating the Value of Preservation: A Playbook

99. NCHRP Report (TRB) 741 – Evaluation of Methodologies for Visual Impact Assessments

100. NCHRP Report (TRB) 738 – Evaluating pavement strategies and barriers for noise mitigation

101. NCHRP Report (TRB) 737 – Design Guidance for High-Speed to Low-Speed Transition Zones for Rural Highways

102. NCHRP Report (TRB) 736 – Resource Allocation Logic Framework to Meet Highway Asset Preservation

103. NCHRP Report (TRB) 735 – Long-Distance and Rural Travel Transferable Parameters for Statewide Travel Forecasting Models

104. NCHRP Report (TRB) 734 – Hydraulic Loss Coefficients for culverts

105. NCHRP Report (TRB) 733 – High-performance/High-Strenghth Lightweight Concrete for Bridge Girder and Decks

5

106. NCHRP Report (TRB) 732 – Methodologies to estimate the economic impacts of disruptions to the goods movement system

107. NCHRP Report (TRB) 730 – Design Guidance for freeway mainline ramp terminals

108. NCHRP Report (TRB) 727 – Effective Experiment Design and Data Analysis in Transportation Research

109. NCHRP Report (TRB) 726 – A guidebook for nighttime construction: Impacts on safety, quality and productivity

110. NCHRP Report (TRB) 725 – Guidelines for Analysis Methods and Construction Engineering of Curved and Skewed Steel Girder Bridges

111. NCHRP Report (TRB) 722 – Assessing Highway Tolling and Pricing Options and Impacts Vol.1 : Decision-Making Framework

112. NCHRP Report (TRB) 722- Assessing Highway Tolling and Pricing Options and Impacts Vol.2 : Travel demand forecasting tools

113. NCHRP Synthesis (TRB) 451 – Emergency Medical Services response to Motor Vehicle Crashes in Rural Areas

114. NCHRP Synthesis (TRB) 450 – Forecasting Highway Construction Staffing Requirements

115. NCHRP Synthesis (TRB) 449 – Strategies to mitigate the impacts of chloride roadway deicers on the natural environment

116. NCHRP Synthesis (TRB) 448 – State department of transportation small business programs

117. NCHRP Synthesis (TRB) 447 – Active traffic management for arterials

118. NCHRP Synthesis (TRB) 446 – Use of advanced geospatial data, tools, technologies, and information in department of transportation projects

119. NCHRP Synthesis (TRB) 445 – Practices for Unbound Aggregate Pavement Layers

120. NCHRP Synthesis (TRB) 438 – Expedited procurement procedure for emergency construction services

121. NCHRP Synthesis (TRB) 437 – Assessing the long-term performance of mechanically stabilized earth walls

122. NCHRP Synthesis (TRB) 436 – Local policies and practices that support safe pedestrian environments

123. NCHRP Synthesis (TRB) 434 – Use of the U.S. census bureau’s public use micro data sample (PUMS) by state departments of transportation and metropolitan planning organisations

124. NCHRP Synthesis (TRB) 432 – Recent roadway geometric design research for improved safety and operations

125. NCHRP Synthesis (TRB) 431 – Practices to manage traffic sign retro reflectivity

126. NCHRP Synthesis (TRB) 430 – Cost effective and sustainable road slope stabilization and erosion control

127. Special Report (TRB) 301 – Air traffic controller staffing in the en route domain : A review of the federal aviation administration’s task load model

128. Special Report (TRB) 303 – Equity of evolving transportation finance mechanisms

129. Special Report (TRB) 307 – Policy options for reducing energy use and greenhouse gas emissions from U.S. Transportation

130. Special Report (TRB) 309 – Evaluating the effectiveness of offshore safety and environmental management systems

131. Special Report (TRB) 310 – Worker Health and Safety on Offshore Wind Farms

6

NEW ADDITIONS TO IRC LIBRARY

S.NO. ACCESSION NUMBER

DESIGNATION NAME OF THE TITLE

1. 15246 MS-1 : Asphalt Institute Asphalt Pavements for Highways and Streets, 2011

2. 15247 MS-21 : Asphalt Institute For Asphalt Concrete and Other Hot-Mix Types, 6th Rev., 2011

3. 15248 MS-41 : Asphalt Institute The Asphalt Handbook, 7th Rev., 2011

4. 15249 MS-161 : Asphalt Institute

Asphalt in Pavement Preservation and Maintenance, 4th Rev., 2011


Asphalt Overlays for Highway and Street Rehabilitation, 4th Rev., 2011


Basic Asphalt Emulsion Manual, 4th Rev., 2011


HMA Construction (Hot Mix Asphalt Pavements), 2nd Rev., 2011


Asphalt Binder Testing, 2nd Rev., 2011

9. 15254 SP-11 : Asphalt Institute Superpave: Performance Graded Asphalt Binder Specification and Testing, 3rd Rev., 2001

10. 15255 SP-21 : Asphalt Institute Superpave Mix Design, 3rd Rev., 2001

11. 15258 AASHTO AASHTO Guide for Design of Pavement Structures, Part – II,1993

12. 15259 AASHTO Rigid Pavement Design & Rigid Pavement Joint Design, 1998

13. 15260 AASHTO A Guide for Achieving Flexibility in Highway Design, 2004

14. 15261 AASHTO Mechanistic-Empirical Pavement Design Guide : A Manual of Practice, 2008

15. 15262 AASHTO The Manual for Bridge Design, 2nd Revision, 2011

16. 15263 AASHTO AASHTO LRFD Bridge Design Specifications Part I, Section 1-5, 2010

17. 15264 AASHTO AASHTO LRFD Bridge Design Specifications Part II, Section 6-Index, 2010

18. 15265 AASHTO AASHTO LRFD Bridge Design Specifications Interim Rev. , 5th Rev., 2010

19. 15495 GOST R 52607-2006 Traffic Control Devices : Roadside Safety Barriers: General Technical Requirements

20. 15496 AASHTO M 249-11 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)

21. 15497 AASHTO M 325-08 Standard Specification for Stone Matrix Asphalt (SMA)

22. 15498 AASHTO R 46-08 Standard Practice for Designing Stone Matrix Asphalt (SMA)

23. 15499 AASHTO T 245-97 (2008) Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus

24. 15500 AASHTO T 283-07 Standard Method of Test for Resistance of Compacted Hot Mix Asphalt (HMA) to Moistur4e-Induced Damage

25. 15501 DIN 53504 Testing of rubber – Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test English translation of DIN 53504:2009-10

26. 15502 DIN 53508 Accelerated ageing of rubber

27. 15503 DIN 53512 Detgermining the rebound resilience of rubber using the Schob pendulum

28. 15504 DIN 53122-1 Determination of the water vapour transmission rate of plastic film,

7



rubber sheeting, paper, board and other sheet materials by gravimetry

29. 15505 DIN EN 1317-2 Road restraint systems- Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets English translation of DIN EN 1317-2: 2011-01

30. 15506 DIN EN 1317-3 Road restraint systems – Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions, English translation of DIN EN 1317-3:2011-01

31. 15507 DIN EN 1317-5 Road restraint systems – Part 5: Product requirements and evaluation of conformity for vehicle restraint systems (includes amendment A1:2008) English version of DIN EN 1317-5: 2008-10

32. 15508 DIN EN 10025-1 Hot rolled products of structural steels: Part 1: General technical delivery conditions English version of DIN EN 10025-1

33. 15509 DIN EN 10025-2 Hot Rolled Products of structural steels : Part 2: Technical delivery conditions for non-alloy structural steels English Version of DIN EN 10025-2

34. 15510 DIN EN 10250-1 Open die steel forgings for general engineering purposes Part 1: General requirements English Version of DIN EN 10250-1

35. 15511 DIN EN 10250-2 Open die steel forgings for general engineering purposes Part 2: Non-alloy quality and special steels English version of DIN EN 10250-2

36. 15512 DIN En 10222-1 Steel forgings for pressure purposes : Part 1: General requirements for open die forgings (includes Amendment A1: 2002) English Version of DIN EN 10222-1: 1998+A1: 2002

37. 15513 DIN ISO 34-1 Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces, 2004

38. 15514 DIN ISO 815-1 Rubber vulcanized or thermoplastic- Determination of compression set – Part 1 : At ambient or elevated temperatures (ISO 815-1:2008) English translation of DIN ISO 815-1:2010-09

39. 15515 DIN ISO 815-2 Rubber, vulcanized or thermoplastic – Determination of compression set – Part 2 : At low temperatures (ISO 815-2: 2008) English translation of DIN ISO 815-2:2010-09

40. 15516 DIN ISO 1431-1 Rubber, vulcanized or thermoplastic – Resistance to Ozone cracking – Part 1 : Static and dynamic strain testing (ISO 1431-1:2004 + Amd 1:2009) English translation of DIN ISO 1431-1:2011-05

41. 15517 DIN ISO 1431-3 Rubber, vulcanized or thermoplastic resistance to ozone cracking – Part 3: reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2000) English translation of DIN ISO 1431-3:2011-05

42. 15518 DIN ISO 1817 Rubber, vulcanized – Determination of the effect of liquids (ISO 1817:2005) English version of DIN ISO 1817:2008-08

43. 15519 DIN ISO 4649 Rubber, vulcanized or thermoplastic – Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2002) English version of DIN ISO 4649-2006-11

44. 15520 DIN EN ISO 12572 Hygrothermal performance of building materials and products Determination of water vapour transmission properties (ISO 12572:2001) English version of DIN EN ISO 12572

8



45. 15521 ASTM A36/A36M-08 Standard Specification for Carbon Structural Steel1

46. 15522 ASTM A588/A588M-10 Standard Specification for High Strength Low-Alloy Structural Steel, upto 50 ksi [345 MPa] minimum yield point, with Atmospheric Corrosion Resistance1

47. 15523 ASTM C309-11 Standard Specification for Liquid Membrane – Forming Compounds for Curing Concrete1

48. 15524 ASTM C1202-12 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration1

49. 15525 ASTM C1561 – 10 Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry1

50. 15526 ASTM D36/D36M-09 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)1

51. 15527 ASTM D276-12 Standard Test Methods for Identification of Fibers in Textiles1

52. 15528 ASTM D297-93 (Reapproved 2006)

Standard Test Methods for Rubber Products – Chemical Analysis1


Standard Test Methods for Rubber Property – Compression Set1

54. 15530 ASTM D412-06a2 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers – Tension1

55. 15531 ASTM D471-10 Standard Test Method for Rubber Property – Effect of Liquids1

56. 15532 ASTM D522-93a (Reapproved 2008)

Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings1

57. 15533 ASTM D573 – 04 (Reapproved 2010)

Standard Test Method for Rubber – Deterioration in an Air Oven1


Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermplastic Elastomers1

59. 15535 ASTM D711-10 Standard Test Method for No-Pick-Up Time of Traffic Paint1

60. 15536 ASTM D788-11 Standard Classification System for Poly (Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds1


Standard Test Method for Peel or Stripping Strength of Adhesive Bonds1


Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive1

63. 15539 ASTM D1043-10 Standard Test Method for Stiffness Properties of Plastics as a function of temperature by Means of a Torsion Test1

64. 15540 ASTM D1149 – 07 Standard Test Methods for Rubber Deterioration – Cracking in an Ozone Controlled Environment1

65. 15541 ASTM D1214 – 10 Standard Test Method for Sieve Analysis of Glass Spheres1


Standard Test Method for Density of Liquid Coatings, Inks, and Related products

67. 15543 ASTM D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique1


Standard Test Methods for Nonvolatile Content of Varnishes1

69. 15545 ASTM D1693-08 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics1

9



70. 15546 ASTM D2041/D2041M-11 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures1

71. 15547 ASTM D2172/D 2172M-11

Standard Test Methods for Quantitative Extraction of Bitumen from Bituminous Paving Mixtures1


Standard Guide for Selection of Tests for Traffic Paints1


Standard Test Method for Rubber Test Method for Rubber Property – Durometer hardness1


Standard Test Method for Permeability of Granular Soils (Constant Head)1


Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements1

76. 15552 ASTM D2990-09 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics1

77. 15553 D 3406-95 (Reapproved 2006)

Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements1

78. 15554 ASTM D3575-08 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers1

79. 15555 ASTM D3677-101 Standard Test Methods for Rubber-Identification by Infrared Spectrophotometry1

80. 15556 ASTM D3776/D3776M-09a2

Standard Test Methods for Mass Per Unit Area (Weight) of Fabric1

81. 15557 ASTM 3786/D3786M-09 Standard Test Method for Bursting Strength of Textile Fabrics – Diapharagm Bursting Strength Tester Method1

82. 15552a ASTM D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser1

83. 15553a ASTM D4280-08 Standard Specification for Extended Life type, Nonplowable, Raised Retroreflective Pavement Markers1

84. 15554a ASTM D4354-99 (Reapproved 2009)

Standard Practice for Sampling of Geosynthetics for Testing1

85. 15555a ASTM D4355-07 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and heat in a xenon Arc Type Apparatus1

86. 15556a ASTM D4491-99a (Reapproved 2009)

Standard Test Methods for Water Permeability of Geotextiles by Permittivity1

87. 15557a ASTM D4533-11 Standard Test Method for Trapezoid Tearing Strength of Geotextiles1

88. 15558 ASTM D4541-091 Standard Test Method for Pull-Off strength of Coatings Using Portable Adhesion Testers1


Standard Practice for handling an Acid Degreaser or Still1

90. 15560 ASTM D4716-08 Standard Test Method for Determining the (in-plane) floow rate per unit width and dydraulic transmissibity of a geosynthetic using a constant head1


Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique1

92. 15562 ASTM D4632 – 08 Standard Test Method for Grab Breaking Load and Elongation of

10



Geotextiles1

93. 15563 ASTM D 4751-04 Standard Test Method for Determining Apparent Opening Size of a Geotextile1

94. 15564 ASTM D4759-11 Standard Practice for Determining the Specification Conformance of Geosynthetics1

95. 15565 ASTM D4833-07 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products1


Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples1

97. 15567 ASTM D4956-11a Standard Specification for Retroreflective Sheeting for Traffic Control1

98. 15568 ASTM D5581-071 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Spec imen)1

99. 15569 ASTM D5199-12 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics1


Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil1

101. 15571 ASTM 6690-07 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements1

102. 15572 ASTM D6637-11 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method1

103. 15573 ASTM D6390-11 Standard Test Method for Determination of Draindown Characteristics in uncompacted Asphalt Mixtures1


Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-related Products Using a 50-mm probe1

105. 15575 ASTM E8/E8M-11 Standard Test Methods for Tension Testing of Metallic Materials1

106. 15576 ASTM E11-091 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves1

107. 15577 ASTM E41-92 (Reapproved 2010)

Standard Terminology Relating to Conditioning1

108. 15578 ASTM E809-08 Standard Practice for Measuring Photometric Characteristics of Retroreflectors1

109. 15579 ASTM E810 – 03 (Reapproved 2008)

Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry1

110. 15580 ASTM F 1553-11 Standard Guide for Specifying Chain Link Fence1

111. 15581 ASTM G154-06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials1

112. 15582 BS 410-1:2000 ISO 3310-1:2000

Test Sieves – Technical requirements and testing – Part 1 : Test sieves of metal wire cloth

113. 15583 BS 410-2:2000 ISO 3310-2:1999

Test Sieves – Technical Requirements and Testing – Part 2 : Test Sieves of Perforated metal Plate

114. 15584 BS 812-114: 1989 Testing aggregates Part 114: Method for determination of the polished-store value

115. 15585 BS 1377-1:1990 (Incorporating Amendment No.1)

Method Test for Soils for Civil Enginering Purposes – Part I : General Requirements and Sample Preparation

116. 15586 BS 1377-2: 1990 Methods of test for Soils for Civil Engineering purposes – Part 2 :

11



(Incorporating Amendment No.1)

Classification Tests

117. 15587 BS 1377-3: 1990 (Incorporating Amendment No.1)

Methods of Test for Soils for Civil Engineering Purposes – Part 3: Chemical and Electro-Chemical Tests

118. 15588 BS 1377-4: 1990 Incorporating Amendments Nos.1 and 2

Methods of Test for Soils for Civil Engineering Purposes – Part 4 : Compaction-related tests

119. 15589 BS 1377-5 : 1990 (Incorporating Amendment No.1)

Methods of Test for Soils for Civil Engineering Purposes – Part 5 : Compressibility, permeability and durability tests

120. 15590 BS 1377-6 : 1990 (Incorporating Amendement No.1)

Methods of Test for Soils for Civil Engineering Purposes – Part 6: Consolidation and permeability tests in hydraulic cells and with pore pressure measurement


Methods of Test for Soils for Civil Engineering Purposes – Part 7 : Shear Strength tests total stress)


Methods of Test for Soils for Civil Engineering Purposes – Part 8 : Shear Strength Tests (Effective Stress)

123. 15593 BS 1377-9 : 1990 (Incorporating Amendments Nos.1 and 2)

Methods of Test for Soils for Civil Engineering Purposes – Part 9 : In-situ tests

124. 15594 BS 1881-5 : 1970 (Incorporating Amendment Nos.1 and 2)

Methods of Testing Concrete – Part 5 : Methods of testing hardened concrete for other than strength

125. 15595 BS 5212-1 : 1990 Cold applied joint sealant systems for concrete pavements – Part I: Specification for Joint Sealants

126. 15596 BS 5212-2 : 1990 Cold Applied Joint Sealant Systems for Concrete Pavements – Part 2 : Code of Practice for the Application and Use of Joint Sealants

127. 15597 BS 5212-3 : 1990 Cold Applied Joint Sealant Systems for Concrete Pavements – Part 3 : Methods of Test

128. 15598 BS 6088:1981 (Reprinted, incorporating Amendments Nos.1 to 3 inclusive)

Specification for Solid glass beads for use with road marking compounds and for other industrial uses

129. 15599 BS 5400 Pt.10C Charts (A) (B) (C)

Charts for Classification of details for fatigue

130. 15600 BS 7542:1992 Method of Test for Curing Compounds for Concrete

131. 15601 BS EN 1090-2:2008 +A1:2011

Execution of Steel Structures and Aluminium Structures Part 2: Technical Requirements for Steel Structures

132. 15602 BS EN 1172:2011 Copper and Copper Alloys – Sheet and Strip for Building Purposes

133. 15603 BS EN 1337-2:2004 Structural Bearings – Part 2 : Sliding Elements

134. 15604 BS EN 1337-3:2005 Structural Bearings – Part 3 : Elastomeric Bearings

12



135. 15605 BS EN 1337-4:2004 (Incorporating corrigendum No.1)

Structural Bearings – Part 4 : Roller Bearings

136. 15606 BS EN 1337-5:2005 Structural Bearings – Part 5 : Pot Bearings

137. 15607 BS EN 1337-6:2004 Structural Bearings – Part 6 : Rocker Bearings

138. 15608 BS EN 1337-7:2004 Structural Bearings – Part 7 : Spherical and Cylindrical PTFE Bearings

139. 15609 BS EN 1337-8:2007 Structural Bearings – Part 8 : Guide Bearings and Restraint Bearings

140. 15610 BS EN 1464:2010 Adhesives – Determination of Peel Resistance of Adhesive Bonds – Floating Roller Method

141. 15611 BS EN 1652:1998 Incorporating Corrigendum No.1

Copper and Copper Alloys – Plate, Sheet, Strip and Circles for General Purposes

142. 15612 BS EN 1653 : 1998 Incorporating Corrigendum No.1 and Amendment No.1

Copper and Copper Alloys – Plate, Sheet and Circles for Boilers, Pressure Vessels and Hot Water Storage Units

143. 15613 BS EN 1654 : 1998 Incorporating Corrigenda Nos.1, 2 and 3

Copper and Copper Alloys – Strip for Springs and Connectors

144. 15614 BS EN 1990:2002 + A1:2005 Incorporating corrigenda December 2008 and April 2010

Eurocode – Basis of Structural Design

145. 15615 BS EN 1991-1-7:2006 Incorporating corrigendum February 2010

Eurocode 1 – Actions on Structures – Part 1-7: General Actions – Accidental Actions

146. 15616 BS EN 1993-1-5:2006 Incorporating Corrigendum April 2009

Eurodode 3 – Design of Steel Structures – Part 1-5 : Plated Structural Elements

147. 15617 BS EN 1994-2:2005 Incorporating Corrigendum July 2008

Eurocode 4 – Design of Composite Steel and Concrete Structures – Part 2: General Rules and Rules for Bridges

148. 15618 BS EN 1993-2:2006 Incorporating Corrigendum July 2009

Eurocode 3 – Design of Steel Structures – Part 2 : Steel Bridges

149. 15619 BS EN ISO 9445-1:2010 Continuously Cold – Rolled Stainless Steel – Tolerances on Dimensions and form Part 1: Narrow Strip and cut lengths (ISO 9445-1:2009)

150. 15620 BS EN ISO 9445-2:2010 Continuously Cold – Rolled Stainless Steel – Tolerances on Dimensions and Form Part 2 : Wide Strip and Plate/Sheet (ISO 9445-2:2009)

151. 15621 BS EN 10025-1:2004 Hot Rolled Products of Structural Steels – Part 1 : General Technical Delivery Conditions

152. 15622 BS EN 10025-2:2004 Hot Rolled Products of Structural Steels – Part 2: Technical Delivery Conditions for Non-Alloy Structural Steels

153. 15623 BS EN 10025-3:2004 Hot Rolled Products of Structural Steels – Part 3: Technical Delivery

13



Conditions for Normalized/normalized rolled Weldable Fine Grain Structural Steels

154. 15624 BS EN 10025-4:2004 Hot Rolled Products of Structural Steels – Part 4 : Technical Delivery Conditions for Thermomechanical Rolled Weldable Fine Grain Structural Steels

155. 15625 BS EN 10025-5:2004 Hot Rolled Products of Structural Steels – Part 5 : Technical Delivery conditions for structural steels with improved atmospheric corrosion resistance

156. 15626 BS EN 10025-6:2004 + A1:2009

Hot Rolled Products of Structural Steels – Part 6: Technical Delivery Conditions for Flat Products of high yield strength structural steels in the quenched and tempered condition

157. 15627 BS EN 10029:2010 Hot-Rolled Steel Plates 3 mm thick or above – Tolerances on Dimensions and Shape

158. 15628 BS EN 10048:1997 Incorporating Amendment No.1

Hot Rolled Narrow Steel Strip – Tolerances on Dimensions and Shape

159. 15629 BS EN 10051:2010 Continuously Hot Rolled Strip and Plate/Sheet Cut from Wide Strip of Non-Alloy and Alloy Steels – Tolerances on Dimensions and Shape

160. 15630 BS EN 10095:1999 Heat Resisting Steels and Nickel Alloys

161. 15631 BS EN ISO 10319:2008 Geosynthetics – Wide-width Tensile Test (ISO 10319:2008)

162. 15632 BS EN ISO 12236:2006 Geosynthetics Static Puncture Test (CBR Test)

163. 15633 BS EN 13422:2004+A1:2009

Vertical road signs – Portable deformable warning devices and delineators – Portable road traffic signs – cones and cylinders

164. 15634 BS EN 12620:2002 + A1:2008 Incorporating Corrigendum May 2004

Aggregates for Concrete

165. 15635 BS EN ISO 12958:2010 Geotextiles and Geotextiles related Products – Determination of Water Flow Capacity in Their Plane (ISO 12958:2010)

166. 15636 BS EN ISO 13000-1:2005 Plastics – Polytetra – Fluoroethylene (PTFE) Semi-finished Products – Part 1 : Requirements and Designation

167. 15637 BS EN ISO 13000-2:2005 Plastics – Polytetra – Fluoroethylene (PTFE) Semi-Finished Products – Part 2 : Preparation of Test Specimens and Determination of Properties

168. 15638 BS EN 13391:2004 Mechanical Tests for Post-Tensioning Systems

____________

Latest Additions in IRC Library

Documents

Transcript of Latest Additions in IRC Library