Latest Additions in IRC Library.pdf

8/20/2019 Latest Additions in IRC Library.pdf

http://slidepdf.com/reader/full/latest-additions-in-irc-librarypdf 1/13

1

LATEST ADDITION IN IRC LIBRARY

S.NO. DESIGNATION NAME OF THE TITLE

1. Indian Technical Textile

Association (ITTA)

Handbook on “Geosynthetics Case Studies of ITTA Members”, 2013

2. R.K. Srivastava Study of Rigid Pavement For Village Roads in Alluvial Regions: A Thesis

3. AASHTO Roadside Design Guide, 4th Revision, 2011

4. AASHTO Guide For Development of Rest Areas on Major Arterials and

Freeways

5. AASHTO A Policy on Geometric Design of Highways & Streets

6. AASHTO R 36-12 : Standard Practice For Evaluating Faulting of Concrete

Pavements

7. AASHTO M 249-12 : Standard Specification for White and Yellow Reflective

Thermoplastic Striping Material (Solid Form)

8. AASHTO T 283-07 : Standard Method Test for Resistance of Compacted Hot

Mix Asphalt (HMA) to Moisture-Induced Damage, 2011

9. AASHTO T 246-97 : Standard Method of Test For Resistance to Plastic Flow of

Bituminous Mixtures Using Marshal Apparatus

10. AASHTO M 325-8 : Standard Specification for Stone Matrix Asphalt (SMA)

11. Jean Deloche The Ancient Bridges of India

12. John Reas The UK National Annex to BS EN 1991-1-4

13. John Reas BS EN 1991-1-5

14. John Reas PD 6688-1-4

15. Hari Babu Kausal Sangah Rajbhasha (Hindi)

16. Manna Narayan Office Assistant (Hindi)

17. IS:4326-2013 Earthquake Resistant Design and Construction of Buildings – Code of

Practice (3rd

Revision)

18. IS:3812 (Pt.1)-2013 Pulverized Fuel Ash-Specification Part 1: For Use as Pozzolana in

Cement

19. IS:3812 (Pt.2)-2013 Pulverized Fuel Ash Specification Part 2 For Use as Admixture in

Cement Mortar & Concrete

20. MoRT&H AIS:125 : Constructional and Functional Requirements for Road

Ambulances

21. Prof. DR. N.S. Srinivasan Taking the High Road Research in Transport in Developing Economies

(1955-2013)

22. S.K. Khanna, CEG Justo &

A. Veeraragavan

Highway Engineering, Rev. 10th

, 2014

23. Transportation Research

Record (TRB)

2270 – Environment 2012

24. Transportation ResearchRecord (TRB)

2271 – Sustainable Practices, Performance Measures, andManagement


Record (TRB)

2272 – Maintenance Services and Surface Weather 2012


Record (TRB)

2274 – Transit Vol.1 2012 Thomas B. Deen Distinguished Lecture


Record (TRB)

2275 – Transit 2012 Vol.2



2


Record (TRB)

2276 – Transit 2012 Vol.3


Record (TRB)

2277 – Transit 2012 Vol. 4


Record (TRB)

2278 – Freeway Operations; Regional Systems Management andOperations; Managed Lanes 2012


2285 – Travel Survey Methods, freight Data Systems, and AssetManagement 2012


Record (TRB)

2286 – Highway Capacity and Quality of Service 2012


Record (TRB)

2287 – Energy and Global climate change 2012


Record (TRB)

2288 – Freight Systems 2012


Record (TRB)

2289 – Railway 2012


Record (TRB)

2290 – Concrete Materials 2012


Record (TRB)

2291 – Information Systems, Geographic Information Systems, and Advanced Computing 2012


Record (TRB)

2292 – Maintenance and Preservation 2012


Record (TRB)

2293 – Asphalt Materials and Mixtures 2012 Vol. 1


Record (TRB)

2294 – Asphalt Materials and Mixtures 2012 Vol.2


Record (TRB)





Record (TRB)

2298 – Traffic Control Devices, Visibility, and Highway-Rail GradeCrossings 2012


Record (TRB)

2299 – Pedestrians 2012


Record (TRB)

2301 – Operational Effects of Geometrics and Access Management2012


Record (TRB)

2302 – Travel Demand Forecasting 2012 Vol.1


Record (TRB)

2303 – Travel Demand Forecasting 2012 Vol.2


Record (TRB)

2305 – Pavement Management 2012 Vol.2


Record (TRB)

2306 – Pavement Management 2012 Vol.3


Record (TRB)

2308 – Urban and Traffic Data Systems, 2012


Record (TRB)

2309 – Highway Design 2012



3

52. Tra53.nsportation

Research Record (TRB)

2310 – Soil Mechanics 2012


Record (TRB)

2311 – Traffic Signal Systems 2012


Record (TRB)

2312 – Roundabouts and Emergency Evacuation 2012


2313 – Structures 2012


Record (TRB)

2314 – Bicyles 2012


Record (TRB)

2315 – Traffic Flow Theory and Characteristics 2012


Record (TRB)

2318 – Safety Management, Emergency Management Systems,Operator Education, School Transportation, and Older Drivers 2012


Record (TRB)

2319 – Demand Management and Carsharing 2012


Record (TRB)

2321 – Human Performance, User Information, and Simulation 2012


Record (TRB)

2322 – Travel Behavior 2012 Vol.1


Record (TRB)

2323 – Travel Behavior 2012 Vol.2


Record (TRB)

2326 – Marine environment, safety, and human factors, 2013


Record (TRB)

2327 – School Transportation; Operator education and regulation; andtraffic law enforcement 2013


Record (TRB)

2328 – Research and education


2329 – Winter maintenance and preservation, 2013


Record (TRB)

2330 – Marine Transportation and Terminal Operations 2013


Record (TRB)

2331 – Structures 2013 Vol1


Record (TRB)

2332 – Vol. 2 - Structures 2013


Record (TRB)

2333 – Network Modeling 2013


Record (TRB)

2335 – Geomaterials 2013


Record (TRB)

2336 – Aviation 2013


Record (TRB)

2338 – Urban and Traffic Data Systems 2013 Vol.1


Record (TRB)

2340 – Air Quality 2013 Vol1


Record (TRB)

2342 – Concrete Materials 2013



4


Record (TRB)

2343 – Travel Demand Forecasting 2013


Record (TRB)

2345 – Vol.1 – Policy 2013: Finance, Economics, and equityconsiderations


Record (TRB)

2348 – Operational effects of geometrics and access management2013


2350 – Transit, Vol.1, 2013


Record (TRB)

2353 – Vol. 4 - Transit 2013


Record (TRB)

2354 – Travel Surveys: Asset Management; and freight data 2013


Record (TRB)

2355 – Vol.1 – Traffic Signal Systems 2013


Record (TRB)

2361 – Vol.2 – Maintenance and Preservation 2013


Record (TRB)

2365 – Human Performance; User Information; and simulation 2013


Record (TRB)

2367 Vol.2 – Pavement Management


Record (TRB)

2377 – Roadside Safety Design, 2013


Record (TRB)

2378 – Freight Modeling and Logistics, 2013

88. NCHRP Report (TRB) 760 – Improving the quality of motorcycle travel data collection

89. NCHRP Report (TRB) 757 – Long-term performance of epoxy adhesive anchor systems

90. NCHRP Report (TRB) 756 – Highway safety research agenda: Infrastructure and Operations

91. NCHRP Report (TRB) 754 – Improving management of transportation information

92. NCHRP Report (TRB) 750 – Vol. 3 – Expediting future technologies for enhancingtransportation system performance

93. NCHRP Report (TRB) 747 – Guide for conducting forensic investigations of highwaypavements

94. NCHRP Report (TRB) 755 – Comprehensive costs of highway-rail grade crossing crashes

95. NCHRP Report (TRB) 753 – A pre-event recovery planning guide for transportation

96. NCHRP Report (TRB) 748 - Guidelines for the Use of Mobile LIDAR in Transportation Applications

97. NCHRP Report (TRB) 743 – Predicting the Initial Retroreflectivity of Pavement Markings fromGlass Bead Quality

98. NCHRP Report (TRB) 742 – Communicating the Value of Preservation: A Playbook

99. NCHRP Report (TRB) 741 – Evaluation of Methodologies for Visual Impact Assessments

100. NCHRP Report (TRB) 738 – Evaluating pavement strategies and barriers for noise mitigation

101. NCHRP Report (TRB) 737 – Design Guidance for High-Speed to Low-Speed TransitionZones for Rural Highways

102. NCHRP Report (TRB) 736 – Resource Allocation Logic Framework to Meet Highway AssetPreservation

103. NCHRP Report (TRB) 735 – Long-Distance and Rural Travel Transferable Parameters forStatewide Travel Forecasting Models

104. NCHRP Report (TRB) 734 – Hydraulic Loss Coefficients for culverts

105. NCHRP Report (TRB) 733 – High-performance/High-Strenghth Lightweight Concrete forBridge Girder and Decks



5

106. NCHRP Report (TRB) 732 – Methodologies to estimate the economic impacts of disruptionsto the goods movement system

107. NCHRP Report (TRB) 730 – Design Guidance for freeway mainline ramp terminals

108. NCHRP Report (TRB) 727 – Effective Experiment Design and Data Analysis inTransportation Research

109. NCHRP Report (TRB) 726 – A guidebook for nighttime construction: Impacts on safety,quality and productivity

110. NCHRP Report (TRB) 725 – Guidelines for Analysis Methods and Construction Engineeringof Curved and Skewed Steel Girder Bridges

111. NCHRP Report (TRB) 722 – Assessing Highway Tolling and Pricing Options and ImpactsVol.1 : Decision-Making Framework

112. NCHRP Report (TRB) 722- Assessing Highway Tolling and Pricing Options and ImpactsVol.2 : Travel demand forecasting tools

113. NCHRP Synthesis (TRB) 451 – Emergency Medical Services response to Motor VehicleCrashes in Rural Areas

114. NCHRP Synthesis (TRB) 450 – Forecasting Highway Construction Staffing Requirements

115. NCHRP Synthesis (TRB) 449 – Strategies to mitigate the impacts of chloride roadway deicers onthe natural environment

116. NCHRP Synthesis (TRB) 448 – State department of transportation small business programs

117. NCHRP Synthesis (TRB) 447 – Active traffic management for arterials

118. NCHRP Synthesis (TRB) 446 – Use of advanced geospatial data, tools, technologies, andinformation in department of transportation projects

119. NCHRP Synthesis (TRB) 445 – Practices for Unbound Aggregate Pavement Layers

120. NCHRP Synthesis (TRB) 438 – Expedited procurement procedure for emergency constructionservices

121. NCHRP Synthesis (TRB) 437 – Assessing the long-term performance of mechanically stabilizedearth walls

122. NCHRP Synthesis (TRB) 436 – Local policies and practices that support safe pedestrianenvironments

123. NCHRP Synthesis (TRB) 434 – Use of the U.S. census bureau’s public use micro data sample(PUMS) by state departments of transportation and metropolitanplanning organisations

124. NCHRP Synthesis (TRB) 432 – Recent roadway geometric design research for improved safetyand operations

125. NCHRP Synthesis (TRB) 431 – Practices to manage traffic sign retro reflectivity

126. NCHRP Synthesis (TRB) 430 – Cost effective and sustainable road slope stabilization anderosion control

127. Special Report (TRB) 301 – Air traffic controller staffing in the en route domain : A review ofthe federal aviation administration’s task load model

128. Special Report (TRB) 303 – Equity of evolving transportation finance mechanisms

129. Special Report (TRB) 307 – Policy options for reducing energy use and greenhouse gasemissions from U.S. Transportation

130. Special Report (TRB) 309 – Evaluating the effectiveness of offshore safety andenvironmental management systems

131. Special Report (TRB) 310 – Worker Health and Safety on Offshore Wind Farms



6

NEW ADDITIONS TO IRC LIBRARY

S.NO. ACCESSION

NUMBER

DESIGNATION NAME OF THE TITLE

1. 15246 MS-1 : Asphalt Institute Asphalt Pavements for Highways and Streets, 2011

2. 15247 MS-21 : Asphalt Institute For Asphalt Concrete and Other Hot-Mix Types, 6th

Rev., 2011

3. 15248 MS-41 : Asphalt Institute The Asphalt Handbook, 7th Rev., 2011

4. 15249 MS-161 : Asphalt

Institute

Asphalt in Pavement Preservation and Maintenance, 4th

Rev., 2011

5. 15250 MS-171 : Asphalt

Institute

Asphalt Overlays for Highway and Street Rehabilitation, 4th Rev., 2011

6. 15251 MS-191 : Asphalt

Institute

Basic Asphalt Emulsion Manual, 4th Rev., 2011

7. 15252 MS-221 : Asphalt

Institute

HMA Construction (Hot Mix Asphalt Pavements), 2nd

Rev., 2011

8. 15253 MS-251 : Asphalt

Institute

Asphalt Binder Testing, 2nd

Rev., 2011

9. 15254 SP-11 : Asphalt Institute Superpave: Performance Graded Asphalt Binder Specification andTesting, 3rd Rev., 2001

10. 15255 SP-21 : Asphalt Institute Superpave Mix Design, 3rd

Rev., 2001

11. 15258 AASHTO AASHTO Guide for Design of Pavement Structures, Part – II,1993

12. 15259 AASHTO Rigid Pavement Design & Rigid Pavement Joint Design, 1998

13. 15260 AASHTO A Guide for Achieving Flexibility in Highway Design, 2004

14. 15261 AASHTO Mechanistic-Empirical Pavement Design Guide : A Manual of Practice,

2008

15. 15262 AASHTO The Manual for Bridge Design, 2nd

Revision, 2011

16. 15263 AASHTO AASHTO LRFD Bridge Design Specifications Part I, Section 1-5, 2010

17. 15264 AASHTO AASHTO LRFD Bridge Design Specifications Part II, Section 6-Index,

201018. 15265 AASHTO AASHTO LRFD Bridge Design Specifications Interim Rev. , 5

th Rev.,

2010

19. 15495 GOST R 52607-2006 Traffic Control Devices : Roadside Safety Barriers: General Technical

Requirements

20. 15496 AASHTO M 249-11 Standard Specification for White and Yellow Reflective Thermoplastic

Striping Material (Solid Form)

21. 15497 AASHTO M 325-08 Standard Specification for Stone Matrix Asphalt (SMA)

22. 15498 AASHTO R 46-08 Standard Practice for Designing Stone Matrix Asphalt (SMA)

23. 15499 AASHTO T 245-97 (2008) Standard Method of Test for Resistance to Plastic Flow of Bituminous

Mixtures Using Marshall Apparatus

24. 15500 AASHTO T 283-07 Standard Method of Test for Resistance of Compacted Hot MixAsphalt (HMA) to Moistur4e-Induced Damage

25. 15501 DIN 53504 Testing of rubber – Determination of tensile strength at break, tensile

stress at yield, elongation at break and stress values in a tensile test

English translation of DIN 53504:2009-10

26. 15502 DIN 53508 Accelerated ageing of rubber

27. 15503 DIN 53512 Detgermining the rebound resilience of rubber using the Schob

pendulum

28. 15504 DIN 53122-1 Determination of the water vapour transmission rate of plastic film,



7

S.NO. ACCESSION

NUMBER


rubber sheeting, paper, board and other sheet materials by

gravimetry

29. 15505 DIN EN 1317-2 Road restraint systems- Part 2: Performance classes, impact test

acceptance criteria and test methods for safety barriers including

vehicle parapets English translation of DIN EN 1317-2: 2011-0130. 15506 DIN EN 1317-3 Road restraint systems – Part 3: Performance classes, impact test

acceptance criteria and test methods for crash cushions, English

translation of DIN EN 1317-3:2011-01

31. 15507 DIN EN 1317-5 Road restraint systems – Part 5: Product requirements and evaluation

of conformity for vehicle restraint systems (includes amendment

A1:2008) English version of DIN EN 1317-5: 2008-10

32. 15508 DIN EN 10025-1 Hot rolled products of structural steels: Part 1: General technical

delivery conditions English version of DIN EN 10025-1

33. 15509 DIN EN 10025-2 Hot Rolled Products of structural steels : Part 2: Technical delivery

conditions for non-alloy structural steels English Version of DIN EN

10025-234. 15510 DIN EN 10250-1 Open die steel forgings for general engineering purposes Part 1:

General requirements English Version of DIN EN 10250-1

35. 15511 DIN EN 10250-2 Open die steel forgings for general engineering purposes Part 2: Non-

alloy quality and special steels English version of DIN EN 10250-2

36. 15512 DIN En 10222-1 Steel forgings for pressure purposes : Part 1: General requirements

for open die forgings (includes Amendment A1: 2002) English Version

of DIN EN 10222-1: 1998+A1: 2002

37. 15513 DIN ISO 34-1 Rubber, vulcanized or thermoplastic Determination of tear strength

Part 1: Trouser, angle and crescent test pieces, 2004

38. 15514 DIN ISO 815-1 Rubber vulcanized or thermoplastic- Determination of compression

set – Part 1 : At ambient or elevated temperatures (ISO 815-1:2008)

English translation of DIN ISO 815-1:2010-09

39. 15515 DIN ISO 815-2 Rubber, vulcanized or thermoplastic – Determination of compression

set – Part 2 : At low temperatures (ISO 815-2: 2008) English

translation of DIN ISO 815-2:2010-09

40. 15516 DIN ISO 1431-1 Rubber, vulcanized or thermoplastic – Resistance to Ozone cracking –

Part 1 : Static and dynamic strain testing (ISO 1431-1:2004 + Amd

1:2009) English translation of DIN ISO 1431-1:2011-05

41. 15517 DIN ISO 1431-3 Rubber, vulcanized or thermoplastic resistance to ozone cracking –

Part 3: reference and alternative methods for determining the ozone

concentration in laboratory test chambers (ISO 1431-3:2000) English

translation of DIN ISO 1431-3:2011-05

42. 15518 DIN ISO 1817 Rubber, vulcanized – Determination of the effect of liquids (ISO

1817:2005) English version of DIN ISO 1817:2008-08

43. 15519 DIN ISO 4649 Rubber, vulcanized or thermoplastic – Determination of abrasion

resistance using a rotating cylindrical drum device (ISO 4649:2002)

English version of DIN ISO 4649-2006-11

44. 15520 DIN EN ISO 12572 Hygrothermal performance of building materials and products

Determination of water vapour transmission properties (ISO

12572:2001) English version of DIN EN ISO 12572



10

S.NO. ACCESSION

NUMBER


Geotextiles1

93. 15563 ASTM D 4751-04 Standard Test Method for Determining Apparent Opening Size of a

Geotextile1

94. 15564 ASTM D4759-11 Standard Practice for Determining the Specification Conformance of

Geosynthetics1

95. 15565 ASTM D4833-07 Standard Test Method for Index Puncture Resistance of

Geomembranes and Related Products1

96. 15566 ASTM D4873-02

(Reapproved 2009)

Standard Guide for Identification, Storage, and Handling of

Geosynthetic Rolls and Samples1

97. 15567 ASTM D4956-11a Standard Specification for Retroreflective Sheeting for Traffic Control1

98. 15568 ASTM D5581-071 Standard Test Method for Resistance to Plastic Flow of Bituminous

Mixtures Using Marshall Apparatus (6 inch-Diameter Spec imen)1

99. 15569 ASTM D5199-12 Standard Test Method for Measuring the Nominal Thickness of

Geosynthetics1

100. 15570 ASTM D6706-01

(Reapproved 2007)

Standard Test Method for Measuring Geosynthetic Pullout Resistance

in Soil1

101. 15571 ASTM 6690-07 Standard Specification for Joint and Crack Sealants, Hot Applied, for

Concrete and Asphalt Pavements1

102. 15572 ASTM D6637-11 Standard Test Method for Determining Tensile Properties of Geogrids

by the Single or Multi-Rib Tensile Method1

103. 15573 ASTM D6390-11 Standard Test Method for Determination of Draindown

Characteristics in uncompacted Asphalt Mixtures1

104. 15574 ASTM D6241-04

(Reapproved 2009)

Standard Test Method for the Static Puncture Strength of Geotextiles

and Geotextile-related Products Using a 50-mm probe1

105. 15575 ASTM E8/E8M-11 Standard Test Methods for Tension Testing of Metallic Materials1

106. 15576 ASTM E11-091

Standard Specification for Woven Wire Test Sieve Cloth and Test

Sieves

1

107. 15577 ASTM E41-92

(Reapproved 2010)

Standard Terminology Relating to Conditioning1

108. 15578 ASTM E809-08 Standard Practice for Measuring Photometric Characteristics of

Retroreflectors1

109. 15579 ASTM E810 – 03

(Reapproved 2008)

Standard Test Method for Coefficient of Retroreflection of

Retroreflective Sheeting Utilizing the Coplanar Geometry1

110. 15580 ASTM F 1553-11 Standard Guide for Specifying Chain Link Fence1

111. 15581 ASTM G154-06 Standard Practice for Operating Fluorescent Light Apparatus for UV

Exposure of Nonmetallic Materials1

112. 15582 BS 410-1:2000

ISO 3310-1:2000

Test Sieves – Technical requirements and testing – Part 1 : Test sieves

of metal wire cloth

113. 15583 BS 410-2:2000

ISO 3310-2:1999

Test Sieves – Technical Requirements and Testing – Part 2 : Test

Sieves of Perforated metal Plate

114. 15584 BS 812-114: 1989 Testing aggregates Part 114: Method for determination of the

polished-store value

115. 15585 BS 1377-1:1990

(Incorporating

Amendment No.1)

Method Test for Soils for Civil Enginering Purposes – Part I : General

Requirements and Sample Preparation

116. 15586 BS 1377-2: 1990 Methods of test for Soils for Civil Engineering purposes – Part 2 :



11

S.NO. ACCESSION

NUMBER


(Incorporating

Amendment No.1)

Classification Tests

117. 15587 BS 1377-3: 1990

(Incorporating

Amendment No.1)

Methods of Test for Soils for Civil Engineering Purposes – Part 3:

Chemical and Electro-Chemical Tests

118. 15588 BS 1377-4: 1990

Incorporating

Amendments Nos.1 and

2

Methods of Test for Soils for Civil Engineering Purposes – Part 4 :

Compaction-related tests

119. 15589 BS 1377-5 : 1990

(Incorporating

Amendment No.1)


Compressibility, permeability and durability tests

120. 15590 BS 1377-6 : 1990

(Incorporating

Amendement No.1)

Methods of Test for Soils for Civil Engineering Purposes – Part 6:

Consolidation and permeability tests in hydraulic cells and with pore

pressure measurement

121. 15591 BS 1377-7 : 1990(Incorporating

Amendment No.1)

Methods of Test for Soils for Civil Engineering Purposes – Part 7 :Shear Strength tests total stress)

122. 15592 BS 1377-8 : 1990

(Incorporating

Amendment No.1)


Shear Strength Tests (Effective Stress)

123. 15593 BS 1377-9 : 1990

(Incorporating

Amendments Nos.1 and

2)

Methods of Test for Soils for Civil Engineering Purposes – Part 9 : In-

situ tests

124. 15594 BS 1881-5 : 1970

(Incorporating

Amendment Nos.1 and 2)

Methods of Testing Concrete – Part 5 : Methods of testing hardened

concrete for other than strength

125. 15595 BS 5212-1 : 1990 Cold applied joint sealant systems for concrete pavements – Part I:

Specification for Joint Sealants

126. 15596 BS 5212-2 : 1990 Cold Applied Joint Sealant Systems for Concrete Pavements – Part 2 :

Code of Practice for the Application and Use of Joint Sealants

127. 15597 BS 5212-3 : 1990 Cold Applied Joint Sealant Systems for Concrete Pavements – Part 3 :

Methods of Test

128. 15598 BS 6088:1981

(Reprinted, incorporating

Amendments Nos.1 to 3

inclusive)

Specification for Solid glass beads for use with road marking

compounds and for other industrial uses

129. 15599 BS 5400 Pt.10C Charts (A)(B) (C)

Charts for Classification of details for fatigue

130. 15600 BS 7542:1992 Method of Test for Curing Compounds for Concrete

131. 15601 BS EN 1090-2:2008

+A1:2011

Execution of Steel Structures and Aluminium Structures Part 2:

Technical Requirements for Steel Structures

132. 15602 BS EN 1172:2011 Copper and Copper Alloys – Sheet and Strip for Building Purposes

133. 15603 BS EN 1337-2:2004 Structural Bearings – Part 2 : Sliding Elements

134. 15604 BS EN 1337-3:2005 Structural Bearings – Part 3 : Elastomeric Bearings



12

S.NO. ACCESSION

NUMBER


135. 15605 BS EN 1337-4:2004

(Incorporating

corrigendum No.1)

Structural Bearings – Part 4 : Roller Bearings

136. 15606 BS EN 1337-5:2005 Structural Bearings – Part 5 : Pot Bearings

137. 15607 BS EN 1337-6:2004 Structural Bearings – Part 6 : Rocker Bearings138. 15608 BS EN 1337-7:2004 Structural Bearings – Part 7 : Spherical and Cylindrical PTFE Bearings

139. 15609 BS EN 1337-8:2007 Structural Bearings – Part 8 : Guide Bearings and Restraint Bearings

140. 15610 BS EN 1464:2010 Adhesives – Determination of Peel Resistance of Adhesive Bonds –

Floating Roller Method

141. 15611 BS EN 1652:1998

Incorporating

Corrigendum No.1

Copper and Copper Alloys – Plate, Sheet, Strip and Circles for General

Purposes

142. 15612 BS EN 1653 : 1998

Incorporating

Corrigendum No.1 and

Amendment No.1

Copper and Copper Alloys – Plate, Sheet and Circles for Boilers,

Pressure Vessels and Hot Water Storage Units

143. 15613 BS EN 1654 : 1998

Incorporating Corrigenda

Nos.1, 2 and 3

Copper and Copper Alloys – Strip for Springs and Connectors

144. 15614 BS EN 1990:2002 +

A1:2005

Incorporating corrigenda

December 2008 and April

2010

Eurocode – Basis of Structural Design

145. 15615 BS EN 1991-1-7:2006

Incorporating

corrigendum February

2010

Eurocode 1 – Actions on Structures – Part 1-7: General Actions –

Accidental Actions

146. 15616 BS EN 1993-1-5:2006

Incorporating

Corrigendum April 2009

Eurodode 3 – Design of Steel Structures – Part 1-5 : Plated Structural

Elements

147. 15617 BS EN 1994-2:2005

Incorporating

Corrigendum July 2008

Eurocode 4 – Design of Composite Steel and Concrete Structures –

Part 2: General Rules and Rules for Bridges

148. 15618 BS EN 1993-2:2006

Incorporating

Corrigendum July 2009

Eurocode 3 – Design of Steel Structures – Part 2 : Steel Bridges

149. 15619 BS EN ISO 9445-1:2010 Continuously Cold – Rolled Stainless Steel – Tolerances on Dimensions

and form Part 1: Narrow Strip and cut lengths (ISO 9445-1:2009)

150. 15620 BS EN ISO 9445-2:2010 Continuously Cold – Rolled Stainless Steel – Tolerances on Dimensions

and Form Part 2 : Wide Strip and Plate/Sheet (ISO 9445-2:2009)

151. 15621 BS EN 10025-1:2004 Hot Rolled Products of Structural Steels – Part 1 : General Technical

Delivery Conditions

152. 15622 BS EN 10025-2:2004 Hot Rolled Products of Structural Steels – Part 2: Technical Delivery

Conditions for Non-Alloy Structural Steels

153. 15623 BS EN 10025-3:2004 Hot Rolled Products of Structural Steels – Part 3: Technical Delivery



13

S.NO. ACCESSION

NUMBER


Conditions for Normalized/normalized rolled Weldable Fine Grain

Structural Steels

154. 15624 BS EN 10025-4:2004 Hot Rolled Products of Structural Steels – Part 4 : Technical Delivery

Conditions for Thermomechanical Rolled Weldable Fine Grain

Structural Steels155. 15625 BS EN 10025-5:2004 Hot Rolled Products of Structural Steels – Part 5 : Technical Delivery

conditions for structural steels with improved atmospheric corrosion

resistance

156. 15626 BS EN 10025-6:2004 +

A1:2009

Hot Rolled Products of Structural Steels – Part 6: Technical Delivery

Conditions for Flat Products of high yield strength structural steels in

the quenched and tempered condition

157. 15627 BS EN 10029:2010 Hot-Rolled Steel Plates 3 mm thick or above – Tolerances on

Dimensions and Shape

158. 15628 BS EN 10048:1997

Incorporating

Amendment No.1

Hot Rolled Narrow Steel Strip – Tolerances on Dimensions and Shape

159. 15629 BS EN 10051:2010 Continuously Hot Rolled Strip and Plate/Sheet Cut from Wide Strip of

Non-Alloy and Alloy Steels – Tolerances on Dimensions and Shape

160. 15630 BS EN 10095:1999 Heat Resisting Steels and Nickel Alloys

161. 15631 BS EN ISO 10319:2008 Geosynthetics – Wide-width Tensile Test (ISO 10319:2008)

162. 15632 BS EN ISO 12236:2006 Geosynthetics Static Puncture Test (CBR Test)

163. 15633 BS EN

13422:2004+A1:2009

Vertical road signs – Portable deformable warning devices and

delineators – Portable road traffic signs – cones and cylinders

164. 15634 BS EN 12620:2002 +

A1:2008

Incorporating

Corrigendum May 2004

Aggregates for Concrete

165. 15635 BS EN ISO 12958:2010 Geotextiles and Geotextiles related Products – Determination of

Water Flow Capacity in Their Plane (ISO 12958:2010)

166. 15636 BS EN ISO 13000-1:2005 Plastics – Polytetra – Fluoroethylene (PTFE) Semi-finished Products –

Part 1 : Requirements and Designation

167. 15637 BS EN ISO 13000-2:2005 Plastics – Polytetra – Fluoroethylene (PTFE) Semi-Finished Products –

Part 2 : Preparation of Test Specimens and Determination of

Properties

168. 15638 BS EN 13391:2004 Mechanical Tests for Post-Tensioning Systems

____________

Latest Additions in IRC Library.pdf

Documents

Transcript of Latest Additions in IRC Library.pdf