Lamett - maintenance instruction- Imperial

After installation: maintenance with Liquid Wax CleanerOsmo Liquid Wax Cleaner is specially designed for ini-tial cleaning and the regular refreshing of your � oor.

Shake the container carefully. The � oor must befree from dust before treatment.

Apply with a cloth a thin layer of Liquid Wax Cleaner on the dry clean � oor. Use 2 teaspoons per 1m². One can is enough for 80-100m².

Remove excess maintenance wax with a cloth, if there was too much wax applied, this will form a greasy layer.

Leave the � oor to dry after application of the product.

Regular maintenance with Osmo Wash & Care Osmo Wash & Care is specially designed for the maintenance of wooden surfaces treated with Osmo Hardwax Oil.

The � oor must be free from dust before treatment. Shake the container carefully.

Add 1 cap of Wash & Care per liter water.

Treat with a light wrung � oor cloth or moplengthwise of the � oor. Osmo Wash & Care doesn’t form a � lm on the surface and can be used as often as necessary without leaving residues.

If necessary clean with a dry cloth to prevent water penetrating into joints our � oor boards. Leave the � oor to dry before use.

Annual maintenance with Liquid Wax CleanerUse the Osmo Liquid Wax cleaner for annual mainte-nance of your � oor. Follow the instructions as described on top of the page.

1

4

3

2

1

43

2

The � oor must be free from dust before treatment. Shake the container carefully. 1

water penetrating into joints our � oor boards. 4

Treat with a light wrung � oor cloth or mop

doesn’t form a � lm on the surface and can be

3

Add 1 cap of Wash & Care per liter water.2

Lamett © • www.lamett.eu1l Wash & Care | 1l Liquid Wax Cleaner

1

43

2