laboratory & sterilization technology...• Optional adaptors for 500/800 μl, 200 μl PCR,...

laboratory & sterilization technology

• Chamber Volume: 160 liters• Temperature range: Ambient Temperature +7°C to 50°C • Temperature variation / fluctuation: ± 0,3°C / ± 0,1°C at 37°C• Programmable temperature alarm range: ± 0,5°C to 5°C • Air jacketed heating system • RaPIDcellTM fast temperature recovery without overshoot • CO2 Range: 0 to 20 % CO2 • CO2 Variation / Fluctuation: ± 0,3 % / ± 0,1% • Programmable CO2 alarm range: ± 0,5 % to 5 % • Infra-Red CO2 level control permitting frequent access • N-SmartTM control system to optimize parameters• LifeCellTM control software to optimize parameters• Equipped with Wi-Fi connection for N-mobileTM

• Password protected control system• RS232 port for PC or AlerTextTM • Maximum information with highly visible 4,3’’ colourful LCD

display• Simultaneous display of set and actual values • Seamless stainless steel chamber with rounded corners • Clean chamber without any sensor inside • NuveDisTM 90°C wet disinfection system • Massive data storage with NuveTrackTM which stores the records

up to ten years with one hour intervals as digitally and graphically• Equipped with NuveComTM communication unit• Ethernet port for remote access through internet• Possibility of sending e-mails in case of any failure• Optional NuveCloserTM software to access the operating

parameters, failure history, memory and other technical parameters

• Auto Zero for permanent accurate control • 0,22 μm sterile filtration of CO2 , sampled gases and Auto-Zero

reference air • Typical 95 % RH to protect cultures against dehydration • Audible and visual (text) alarms, remote alarm relay • Remote alarm outlet • Optional AlerTextTM SMS alarm system for ultimate security • Optional NuveWarnTM remote alarm system • Optional NuveRayTM UV light sterilization kit• Optional NuveCleanTM decontamination kit for humidity tray• Built-in 2nd stage gas regulator

EC 160 CO2 INCUBATORPOWERED BY N-SmartTM

CO2 IN

CUBA

TOR

• DF Series: -86°C / FR Series : -41°C • Three different sizes: 261, 461, 560 liters• DirectFREEZETM: Faster and homogenous freezing through the

coils located inside the shelves• Powerful and reliable N-SmartTM microprocessor control system• Maximum information with highly visible 4,3’’ colourful LCD

display • Massive data storage with internal memory that stores the

records up to ten years with one hour intervals as digitally and graphically

• Ethernet port for remote access through internet• Possibility of sending e-mails in case of any failure• Optional NuveCloserTM software to access the operating


• Four independent compartments with insulated doors for decreasing air entry

• Minimized air exchange on opening reduces ice build-up and protects samples

• Compartment dimensions match commonly used cryoboxes • Washable air filter for simple maintenance and top performance • Perfect air tightness with soft gasket • Heated contact surface of gasket to virtually eliminate icing-up • Chamber made of stainless steel for longer life and shelves made

of aluminum for faster heat transfer • Equipped with NuveCom™ communication unit• Equipped with Wi-Fi connection for N-Mobile™

DF 290/490/590 ULTRA LOW

TEMPERATURE FREEZERSFR 290/490/590 DEEP FREEZERS

POWERED BY N-SmartTM

DEE

P FR

EEZE

RS

• Epoxy-polyester powder coated stainless steel outer body

• Foamed-in-place high density polyurethane insulation

• Door handle with key lock • Key operated mains power switch to protect your

samples • Audible and visual alarm system • Alarm system fed by a permanently recharged

battery • Display of actual temperature even at power

failure • Standard remote and central alarm ports • Optional battery-operated 7- day chart recorder • Optional AlerText™ SMS alarm system for

ultimate security • Optional NuveWarn™ remote alarm system • Optional CO2 back-up system to extend

protection in case of failure (DF only)

INCU

BATO

RS

• Two different sizes: 55 and 120 liters• Temperature range: Ambient Temperature +5°C / 99,9°C• Excellent incubation conditions for the applications in

biology and microbiology laboratories such as medical and veterinary fields; research and quality control examinations in pharmaceutical, food and cosmetics industries and biotechnology

• N-PrimeTM programmable PID microprocessor control system• User friendly control panel including large bright LED displays for

temperature and time• Easy programming with one button, just turn and push• Password protected menu to secure the operation• Programmable alarm limits • Data recording on memory stick by means of USB port up to 125 days• Delayed start timer• Stainless steel interior for easy cleaning and decontamination• Air jacketed heating system and triple insulation for highly

precise and constant temperatures • Very homogeneous temperature distribution by natural air

convection: Minimum turbulence and no cross contamination• Frameless inner glass door for the observation of samples

without any temperature drop• Safety thermostat as standard• Optional N-SmartTM control system• Optional Wi-Fi connection for N-Mobile™

• Three different sizes: 22, 44 and 120 liters• Temperature range: Ambient Temperature +5°C / 80°C• Excellent incubation conditions for the applications in

biology and microbiology laboratories such as medical and veterinary fields; research and quality control examinations in pharmaceutical, food and cosmetics industries and biotechnology

• N-PrimeTM programmable PID microprocessor control system• User friendly control panel including large bright LED displays for

temperature and time• Easy programming with one button, just turn and push• Password protected menu to secure the operation• Programmable alarm limits • Data recording on memory stick by means of USB port up to 125 days• Delayed start timer• Anodic-oxidized aluminum chamber • Very homogeneous temperature distribution obtained by natural

air convection• Frameless inner glass door for the observation of samples

without any temperature drop• Safety thermostat as standard• Optional Wi-Fi connection for N-Mobile™

EN 055/120 INCUBATORSPOWERED BY N-PrimeTM

EN 300/400/500 INCUBATORSPOWERED BY N-PrimeTM

• Two different sizes: 120 and 252 liters• Temperature range: -10°C / 60°C• Ideal design for freezing, incubation, drying, different types of

tests and long storage in the fields of biology, zoology, botany and the quality control and R&D laboratories in industry such as pharmaceuticals, food and cosmetics

• Powerful and reliable N-SmartTM microprocessor control system• Maximum information with highly visible 4,3’’ colourful

LCD display• Massive data storage with internal memory that stores the


• Programmable microprocessor control system• 20 program memories with 20 steps • Possibility of repeating each program up to 99 times• Stainless steel chamber • High density injected polyurethane insulation • Powerful air circulation system for excellent temperature

uniformity and stability even at low temperatures • Automatic defrost system• Large window on the door consisting of triple glass for perfect

insulation• Interior lighting • Optional NuveComTM communication unit which includes 2 pcs.

USB port for data storage and PC, Ethernet port for remote access through internet and RS 232 outlet

• Optional NuveCloserTM software to access the operating parameters, failure history, memory and other technical parameters

• Optional Wi-Fi connection for N-MobileTM

ES 120/252 COOLED INCUBATORS


COO

LED

INCU

BATO

RS

DRY

HEA

T ST

ERIL

IZER

S / O

VEN

S

• Two different sizes: 55 and 120 liters • Temperature range: 70°C to 250°C • Designed for sterilization, drying and heating purposes • N-PrimeTM programmable PID microprocessor control system• User friendly control panel including large bright LED displays for

temperature and time• Easy programming with one button, just turn and push• Password protected menu to secure the operation• Programmable alarm limits • Data recording on memory stick by means of USB port up to 125 days• Delayed start timer• Stainless steel interior for easy cleaning and high resistance to

most chemicals • Excellent uniformity and stability of temperature by triple

insulation and air jacketed heating system• Natural air convection for homogeneous temperature distribution • Minimal temperature loss by means of the door pressing firmly

and tightly on the chamber gasket• Outlet port for vapor exhaustion • Safety thermostat as standard• Optional N-SmartTM control system• Optional Wi-Fi connection for N-Mobile™

• Two different sizes: 44 and 120 liters• Temperature range: Ambient Temperature +70°C / 250°C• Designed for sterilization, drying and heating purposes • N-PrimeTM programmable PID microprocessor control system• User friendly control panel including large bright LED displays for

temperature and time• Easy programming with one button, just turn and push• Password protected menu to secure the operation• Programmable alarm limits • Data recording on memory stick by means of USB port up to 125 days• Delayed start timer • Excellent uniformity and stability of temperature by high grade of

insulation and microprocessor control system• Anodic-oxidized aluminum chamber• Very homogeneous temperature distribution obtained by natural

air convection• Minimal temperature loss by means of the door pressing firmly

and tightly against the chamber gasket • Outlet port for vapour exhaustion • Safety thermostat as standard• Optional Wi-Fi connection for N-Mobile™

FN 055/120 DRY HEAT STERILIZERS / OVENSPOWERED BY N-PrimeTM

FN 400/500 DRY HEAT STERILIZERS / OVENS POWERED BY N-PrimeTM

• Two different sizes: 193, 375 liters • Temperature range: 70°C / 250°C • High volume for drying and heating purposes• N-PrimeTM programmable PID microprocessor control system • User friendly control panel including large bright LED displays for

temperature and time• Easy programming with one button, just turn and push• Password protected menu to secure the operation• Programmable alarm limits • Data recording on memory stick by means of USB port up to 125 days• Delayed start timer• Excellent uniformity and stability of temperature by high grade of

insulation and microprocessor control system• Stainless steel chamber • Very homogeneous temperature distribution obtained by forced

air ventilation• Extraction fan • Minimal temperature loss by means of the door pressing firmly and

tightly against the chamber gasket • Outlet port for vapour exhaustion • Safety thermostat as standard• Optional Wi-Fi connection for N-Mobile™

• Two different sizes: 42 and 110 liters• Temperature range: Ambient Temperature +70°C / 250°C• Designed for sterilization, drying and heating purposes• N-Prime™ programmable PID microprocessor control system• User friendly control panel including large bright LED displays for

temperature and time• Easy programming with one button, just turn and push• Password protected menu to secure the operation• Programmable alarm limits• Data recording on memory stick by means of USB port up to 125

days• Delayed start timer• Excellent uniformity and stability of temperature by high grade of

insulation and microprocessor control system• Stainless steel chamber• Very homogeneous temperature distribution obtained by forced

air ventilation• Minimal temperature loss by means of the door pressing firmly

and tightly against the chamber gasket• Outlet port for vapor exhaustion• Safety thermostat as standard• Optional Wi-Fi connection for N-Mobile™

KD 200/400OVENS

POWERED BY N-PrimeTM

OVE

NS

FN 400P/500POVENS

POWERED BY N-Prime™

CEN

TRIF

UG

ES

• Maximum capacity: 12x15 ml • Maximum speed: 5.000 rpm • Maximum RCF: 2.822xg • N-PrimeTM programmable microprocessor control system • Easy programming with one button, just turn and push• Highly visible dual bright LED display for time and speed / RCF(xg) • 1 - 99 minutes timer with hold position • Epoxy-polyester powder coated steel chamber • Pulse key • Quiet, direct drive, brushless induction motor • Motor over heating protection • Ventilation system for minimum temperature increase in the chamber • Lid lock • Delivered with 12x15 ml Angle rotor made of polypropylene • Optional adaptors for 1,5/2 ml, 5 ml and 7 ml tubes

NF 200 BENCHTOP CENTRIFUGE POWERED BY N-PrimeTM

• N-PrimeTM programmable microprocessor control system

• Easy programming with one button, just turn and push• Highly visible dual bright LED display for time and speed / RCF(xg) • 1 - 99 minutes timer with hold position • Epoxy-polyester powder coated steel chamber • Pulse key • Quiet, direct drive, brushless induction motor • Motor over heating protection • Ventilation system for minimum temperature increase in the

chamber • Lid lock • Choice of 24x1,5/2 ml Angle Rotor and 24x capillary tube

haematocrit rotor• Optional adaptors for 500/800 μl, 200 μl PCR, 250/400/700 μl

NF 048 MICROLITRE AND HAEMATOCRIT CENTRIFUGEPOWERED BY N-PrimeTM

NF 048 Haematocrit Rotor Angle Rotor

Maximum capacity: 24xCapillary tubes 24x1,5/2 ml

Maximum speed: 12.000 rpm 14.000 rpm

Maximum RCF: 14.811xg 18.188xg

CEN

TRIF

UG

ES

• N-PrimeTM programmable microprocessor control system• Easy programming with one button, just turn and push• 10 program memories• Highly visible bright LED displays for programmable parameters • LED display for temperature for NF 400R • Programmable relative centrifugal force (RCF) • Electronic imbalance detection system • Stainless steel chamber • 1 - 99 minutes timer with hold position • 10 acceleration / 10 braking rates • Lid lock • Powerful, quiet and maintenance-free induction motor • Minimum temperature increase in the chamber by means of

ventilation system for NF 400 • Temperature control between -9°C / +40°C for NF 400R • Motor overheating protection • Wide range of accessories to accommodate most manufacturers’

tubes and microtitre plates • Totally CFC free refrigerant fluid and insulation material for NF 400R

NF 400 – NF 400R Swing-out Rotors Angle Rotors

Maximum capacity: 4x100ml 2xM.Plate 30x15 ml

Maximum speed: 4.100 rpm 4.100 rpm 4.100 rpm

Maximum RCF: 2.819xg 2.011xg 2.142xg

NF 400 - NF 400R MEDIUM CAPACITY

BENCHTOP CENTRIFUGES POWERED BY N-PrimeTM

NF 800 – NF 800R NF 1200 – NF 1200R MULTI PURPOSE BENCHTOP CENTRIFUGES POWERED BY N-PrimeTM

• N-PrimeTM programmable microprocessor control system • Easy programming with one button, just turn and push• Programmable parameters: Program no, speed / RCF, time, acceleration and

breaking rates and temperature for NF 800R and NF 1200R • Four large bright LED displays for programmable parameters • 1-99 minutes with hold position • 10 program memories • 10 acceleration / 10 braking rates • Stainless steel chamber • Electronic imbalance detection system• Wide range of accessories to accommodate most manufacturers’ tubes and

microtitre plates• Powerful, quite, maintenance-free induction motor • Rotor overspeed protection• Motor overheating protection• Minimum temperature increase in the chamber by means of ventilation system

for NF 800 and NF 1200 • Temperature control between -9°C / +40°C for NF 800R and NF 1200R • Totally CFC free refrigerant fluid and insulation material for NF 800R and NF 1200R

CEN

TRIF

UG

ES

NF 800 – NF 800R Swing-out Rotors Angle Rotors

Maximum capacity: 4x200 ml 2x3 M.Plate 6x50 ml 30x15 ml 24x1,5/2 ml

Maximum speed: 4.100 rpm 4.100 rpm 9.000 rpm 4.100 rpm 14.000 rpm

Maximum RCF: 3.045xg 2.349xg 9.418xg 3.007xg 18.407xg

NF 1200-NF 1200R Swing-out Rotors Angle Rotors

Maximum capacity: 4x280 ml 2x3M.Plate 6x100 ml 10x10 ml 30x1,5/2 ml 24x1,5/2 ml

Maximum speed: 4.100 rpm 4.100 rpm 9.000 rpm 12.000 rpm 13.200 rpm 14.000 rpm

Maximum RCF: 3.082xg 2.349xg 8.965xg 14.167xg 19.400xg 18.407xg

WAT

ER B

ATH

S

• Three different useful volumes : 4, 7 and 15 liters • Temperature range: Ambient temperature + 5°C / 99,9°C • Designed for many general and special applications in microbiology, research and industrial laboratories• Excellent temperature control of liquid by N-PrimeTM programmable PID

microprocessor control system • User friendly control panel including large bright LED displays for temperature and time• Easy programming with one button, just turn and push• Password protected menu to secure the operation• Programmable alarm limits • Data recording on memory stick by means of USB port up to 125 days• Delayed start timer • Seamless stainless steel tank for easy cleaning• Safety thermostat to prevent running without water• Excellent temperature uniformity and stability by triple insulation • Footprint almost equal to the working area to save bench space• Optional Wi-Fi connection for N-Mobile™

• Tank volume: 30 litres • Useful volume: 17 litres• Temperature range: Ambient Temperature +5°C / 99,9°C• Designed for many general and special applications in

microbiology, research and industrial laboratories• Excellent temperature control of liquid for uniform and stable

temperatures • Powerful internal circulation pump not occupying the tank space• N-PrimeTM programmable PID microprocessor control system • User friendly control panel including large bright LED displays for

temperature and time• Easy programming with one button, just turn and push• Password protected menu to secure the operation• Programmable alarm limits • Data recording on memory stick by means of USB port up to 125 days• Delayed start timer• Seamless stainless steel tank for easy cleaning• Excellent temperature uniformity and stability by triple insulation • Safety thermostat to prevent running without water• Various types of racks and shelves for tubes and flasks• Optional Wi-Fi connection for N-Mobile™

NB 5/9/20 UNSTIRRED WATER BATHS


BM 30 CIRCULATED WATER BATH


• Tank volume: 30 litres• Useful volume: 17 litres• Temperature range 0°C / 80°C• Designed for bacteria and cell culture, coagulation tests,

determination of coliforms, enzyme reactions and for many other applications in research and industrial laboratories

• Powerful and reliable N-SmartTM microprocessor control system• Maximum information with highly visible 4,3’’ colourful LCD

display• Massive data storage with internal memory that stores the


• 20 program memories with 20 steps• Possibility of repeating each program up to 99 times• Excellent temperature control of liquid for uniform and stable

temperatures• Powerful internal circulation pump• Delayed start timer• Seamless stainless steel tank for easy cleaning• Optional NuveComTM communication unit which includes 2

pcs. USB port for data storage and PC. Ethernet port for remote access through internet and RS 232 outlet

• Optional NuveCloserTM software to access the operating parameters, failure history, memory and other technical parameters

• Optional Wi-Fi connection for N-Mobile™

• Tank volume: 30 liters • Temperature range: Ambient temperature +5°C / 99,9°C • Shaking speed between 20 - 250 rpm • N-PrimeTM programmable microprocessor control system for

shaking speed, temperature and time• User friendly control panel including large bright LED displays for

temperature and time• Easy programming with one button, just turn and push• Password protected menu to secure the operation• Programmable alarm limits • Data recording on memory stick by means of USB port up to 125 days• Delayed start timer• Excellent temperature control of liquid for uniform and stable

temperatures • Seamless and stainless steel tank • Heater placed outside of the tank • Triple insulation for homogeneous and stable temperature • Safety thermostat to prevent running without water• Possibility to use different types of tubes, flasks or erlenmeyers

with wide range of accessories• Optional Wi-Fi connection for N-Mobile™

BS 30 REFRIGERATED WATER BATH POWERED BY N-SmartTM

ST 30 SHAKING WATER BATH POWERED BY N-PrimeTM

WAT

ER B

ATH

S

• Capacity: ND 4: 4 lt/hr, ND 8: 8 lt/hr, ND 12: 12 lt/hr • Distilled water storage tank capacity: ND 4: 8 liters, ND 8: 16 liters, ND 12: 24 liters • New design with distilled water storage tank • Fully automatic system with microprocessor control system • Stainless steel boiler and condenser • Stainless steel heaters • Energy saving design by the distillation of heated cooling water • Heaters protected against running without water• Warning leds for: High water level, insufficient water, heater failure,

half full storage tank, full storage tank • Siliphos cartridge filter to decrease calcification on the heaters • Suitable for benchtop use and wall mounting

• Distilled water capacity: 3,5 lt/hr • Stainless steel heater • All surfaces in contact with water and steam made of stainless

material • Manometer for inlet water pressure • Protection against empty boiling tank and water shortage • High efficiency even at low inlet water pressure • Wall mounted type, saving space in the laboratories • Easy and simple operation

ND 4/8/12 WATER DISTILLERS

NS 103 ECONOMICAL

WATER DISTILLER

WAT

ER D

ISTI

LLER

S

MED

ICA

L RE

FRIG

ERAT

ORS

• Advanced technology to store drugs, vaccines, pharmaceutical and medical products

• Powerful and reliable N-SmartTM microprocessor control system• Maximum information with highly visible 4,3’’ colourful LC

display• Massive data storage with internal memory that stores the


• 2 pcs. USB port for data storage and PC• Ethernet port for remote access through internet• Possibility of sending e-mails in case of any failure• Optional NuveCloserTM software to access the operating


• Stainless steel chamber• High density injected polyurethane insulation• Door window with triple glass for perfect insulation• Magnetic gasket on four sides of the door and door key lock• Chamber illumination with switch control• Powerful air circulation system to maintain temperature

uniformity and stability and for quick recovery time• Fully automatic defrost system to maintain cooling coil efficiency• Mains power switch key with lock• Temperature range: 0°C / +10°C• Temperature display resolution: 0,1°C• Alarm system for high and low temperature, power failure,

temperature sensor failure and open door• Rechargeable battery to feed alarm system• Remote and central alarm outlet as standard• Optional Wi-Fi connection for N-Mobile™• Optional battery operated 7-day chart recorder with high

resolution• Optional AlerTextTM SMS alarm system for ultimate security• Optional NuveWarnTM remote alarm system

MD 72/120 /294MEDICAL REFRIGERATORS POWERED BY N-SmartTM

Capacity:MD 72: 200 litersMD 120: 306 litresMD 294: 630 liters

BLO

OD

BA

NK

REFR

IGER

ATO

RS

• Temperature range: 0°C / +10°C• Advanced technology to store blood and blood components• Powerful and reliable N-SmartTM microprocessor control system• Maximum information with highly visible 4,3’’ colourful LCD display• Massive data storage with internal memory that stores the records

up to ten years with one hour intervals as digitally and graphically• 2 pcs. USB port for data storage and PC• Ethernet port for remote access through internet• Possibility of sending e-mails in case of any failure• Optional NuveCloserTM software to access the operating parameters,

failure history, memory and other technical parameters• Stainless steel chamber• High density injected polyurethane insulation• Door window with triple glass for perfect insulation • Magnetic gasket on four sides of the door and door key lock • Chamber illumination with switch control • Easily drawn stainless steel drawers with plexiglass cover on the

front • Separators inside the drawers to hold the blood bags in an angled

position for easy label reading • Powerful air circulation system to maintain temperature uniformity

and stability and for quick recovery time • Fully automatic defrost system to maintain cooling coil efficiency • Mains power switch key with lock • Alarm system for high and low temperature, power failure,

temperature sensor failure and open door • Rechargeable battery to feed alarm system • Remote and central alarm outlets as standard • Equipped with Wi-Fi connection for N-Mobile™• Temperature measurement from a liquid which has similar thermal

specifications with blood • Optional battery operated 7-day chart recorder with high resolution • Optional AlerText™ SMS alarm system for ultimate security • Optional NuveWarn™ remote alarm system

KN 72/120/294BLOOD BANK

REFRIGERATORSPOWERED BY N-SmartTM

Capacity: KN 72: 200 liters, 72 blood bags

KN 120: 306 liters, 120 blood bags KN 294: 630 liters, 294 blood bags

PLAT

ELET

INCU

BATO

R

PN 150PLATELET INCUBATOR POWERED BY N-SmartTM

• PN 150 : Chamber Volume : 150 liters / includes 1 pc. PS 54 Platelet Agitator

• Temperature range: +20°C / +35°C• Powerful and reliable N-SmartTM microprocessor control system• Maximum information with highly visible 4,3’’ colourful LCD display• Massive data storage with internal memory that stores the records

up to ten years with one hour intervals as digitally and graphically• 2 pcs. USB port for data storage and PC• Ethernet port for remote access through internet• Possibility of sending e-mails in case of any failure• Optional NuveCloserTM software to access the operating parameters,

failure history, memory and other technical parameters• Stainless steel chamber• Convenient observation of platelet bags with interior illumination

and large window • High density injected polyurethane insulation • Perfectly insulated triple glass window and stainless steel frame • Antifogging inner glass for avoiding condensation and outer glass

blocking UV light • Prevention of air leakage from the chamber and ambient ingress

with magnetic gasket • Protection against inadvertent and unauthorized access by using

a key lock • Excellent temperature uniformity and stability with powerful air

circulation system • Platelet protection by quick recovery time after door openings • Standard remote and central alarm ports• Power switch with key lock to prevent the platelet incubators from

unauthorized use• Audible and visual alarm system• Alarm system fed by automatically re-chargeable battery• Display of actual temperature even at power failure• Remote and central alarm outlet as standard • Equipped with Wi-Fi connection for N-Mobile™• Optional battery operated 7-day chart recorder with high resolution• Optional AlerText™ SMS alarm system for ultimate security • Optional NuveWarn™ remote alarm system

• Capacity: 54 pcs platelet bags • Number of shelves: 9 • Shaking speed: 60 strokes / min • Specially designed for platelet bags • Low noise operation • Shelves made of stainless steel • Maximum temperature homogeneity with mesh type shelves

for air circulation • Easy access to platelet bags on pull-out shelves • Ergonomic shelf design • Audible alarm if motion is not detected

PS 54 PLATELET AGITATOR

MIC

ROBI

OLO

GIC

AL

SAFE

TY C

ABI

NET

S

• Two models with different working table widths: MN 090: 89 cm / MN 120: 119 cm• First class protection for operator, environment and product• Microprocessor control system with digital display for air

flow speed • Two HEPA filters with 99,995 % efficiency for particles ≥ 0,3 μm. • Automatic speed compensation system against clogged filter • Recirculated HEPA filtered air to prolong the lifetime of HEPA

filters• Mains power switch with key lock• Alarms for: Power failure, control system failure, open window,

low and high air flow speed, clogged filters • Perfect air tightness of window seal by means of gas spring

assisted window • Comfort of usage with very quiet blower and high light intensity • Smooth chamber walls and rounded corners without soldering

for easy cleaning and decontamination • Stainless steel and removable 3 pcs. work table • DOP test inlet, elapsed time counter and 2 pcs. of power socket as

standard• EN 12469 Certificate for MN 120 (TÜV GS Certified)

MN 090/120CLASS II

MICROBIOLOGICAL SAFETY CABINETS

LAM

INA

R A

IR F

LOW

CA

BIN

ETS

• Two models with different working table widths: LN 090: 89 cm LN 120: 119 cm• Designed for the applications with non-hazardous materials in

particle free environment for complete product protection• Single piece working table made of stainless steel for easy

cleaning and decontamination• Pre-filter with 85 % efficiency for particles ≥ 0,5 μm ; HEPA filter

with 99,995 % efficiency for particles ≥ 0,3 μm• Microprocessor control system with digital display for air

flow speed• Automatic speed compensation system against clogged filter • Audible and visible alarm for lower or higher airflow speed• Recirculated HEPA filtered air to prolong the lifetime of pre and

HEPA filters• High light intensity and low noise level• Elapsed time counter and 2 pcs. of power socket as standard • DOP test inlet

LN 090/120LAMINAR AIR FLOW CABINETS

STEA

M S

TERI

LIZE

RS

• Conforms to the requirements of EN 13060 standard• Type of Sterilization Loads: B Model: All wrapped, un-wrapped, solid, hollow load products

Type A* and porous products S Models: Non-wrapped solid products, porous products, small

porous items, hollow load products Type B*, single wrapped products, multiple-layer wrapped products

• Sterilization programs: B Model: 5 preset programs Universal, quick unwrapped material, sensitive material, prion, flash S Models: 5 preset programs Quick, universal, prion, sensitive, wrapped• 2 free programs and 1 drying program• Test Programs: B Model: Bowie & Dick / Helix Test and Vacuum Test S Models: Bowie & Dick and Vacuum Test • Powerful and reliable N-SmartTM microprocessor control system• Operating parameters can be tracked graphically against time• Massive data storage with internal memory which stores the

records of last 500 cycles in detail and 29.500 cycles as summary• Memory for the last 100 failures• USB port to record the operated cycles in the memory to a

memory stick• Ethernet port for remote access through internet by means of

optional NuveCloser™ software• Equipped with Wi-Fi connection for N-Mobile™• Optional panel type printer to keep the records of the

sterilization cycle• Password protected control system, service and calibration menu • Lid safety system • Colour of the display changes to red in case of any alarm condition

along with an audible alarm• Reminder for gasket and filter replacement• Remote failure diagnostics by means of NuveCloser™ software• Sending e-mails up to five e-mail addresses with the details of

failure• Optional AlerText™ SMS alarm system for ultimate security• Safety valve against over pressure• Microbiological filter at air intake line• Chamber manufactured according to 2014/68/EU• Fractionated pre-vacuum system• Process evaluation system• Comprehensive self-diagnostic system

* As defined in EN 13060

NC 23B NC 23S/32S

B & S CLASS BENCH TOP STEAM STERILIZERS


Chamber Capacity:NC 23B, NC 23S: 23 liters

NC 32S: 32 liters

• Chamber volume: NC 40M: 40 liters, NC 90M: 90 liters • Maximum capacity: NC 40M: 2x5 liters, NC 90M: 3x8 liters • Especially developed for the steam sterilization of liquid and

culture media• Sterilization temperature range: 105°C - 135°C • Five pre-set programs which guarantee safe sterilization of the

treated material• Two free programs for liquid and solid and a special program for

melting• Flexible temperature sensor to measure the exact liquid

temperature • Cooling by forced air ventilation over chamber • Fractionated exhaust system for sensitive materials such as glass • Chamber made of 316L stainless steel • Manometer for chamber pressure • Validation port • Safety precautions for lid opening depending on the type of the

sterilized material• Powerful and reliable N-SmartTM microprocessor control system• Operating parameters can be tracked graphically against time• Massive data storage with internal memory which stores the

records of last 500 cycles in detail and 29.500 cycles as summary• Memory for the last 100 failures• Programmable delayed start function • USB port to record the operated cycles in the memory to a


optional NuveCloser™ software• Equipped with Wi-Fi connection for N-Mobile™• Optional panel type printer to keep the records of the

sterilization cycle• Password protected control system, service and calibration menu • Lid safety system • Colour of the display changes to red in case of any alarm

condition along with an audible alarm• Reminder for gasket replacement• Remote failure diagnostic by means of NuveCloser™ software• Sending e-mails up to five e-mail addresses with the details of

failure• Optional AlerText™ SMS alarm system for ultimate security• Safety valve against over pressure• Chamber manufactured according to 2014/68/EU• Comprehensive self-diagnostic system

NC 40M/90M LABORATORY STEAM STERILIZERSPOWERED BY N-SmartTM

STEA

M S

TERI

LIZE

RS

• Chamber volume: 100 liters • Sterilization temparature range: 105°C - 136°C• Advanced technology for the sterilization of textile, wrapped or

packed materials, glass and liquid • Integrated steam generator for fast production of steam • Maintenance-free diaphram type powerful vacuum pump • Fractionated pre-vacuum to eliminate all air bubbles and achieve

successful steam penetration • Fractionated post-vacuum for efficient drying of the samples • Sterilization quality matching the needs of EN 285 European

Standard for Large Steam Sterilizers • Pre-heated chamber to eliminate condensation on the chamber

walls and speed up heating of the samples • 5 preset programs: Universal, Solid rubber material, Prion, Quick

unwrapped, Sensitive material• 10 free programs and two special programs for liquid sterilization

and drying• Vacuum leakage and Bowie & Dick test programs• Powerful and reliable N-SmartTM microprocessor control system• Operating parameters can be tracked graphically against time• Massive data storage with internal memory which stores the

records of last 500 cycles in detail and 29.500 cycles as summary• Memory for the last 100 failures• USB port to record the operated cycles in the memory to a memory

stick• Ethernet port for remote access through internet by means of

optional NuveCloser™ software• Equipped with Wi-Fi connection for N-Mobile™• Optional panel type printer to keep the records of the sterilization

cycle• Password protected control system, service and calibration menu • Colour of the display changes to red in case of any alarm condition

along with an audible alarm• Reminder for gasket and filter replacement• Remote failure diagnostics by means of NuveCloser™ software•Sending e-mails up to five e-mail addresses with the details of

failure• Optional AlerText™ SMS alarm system for ultimate security• Safety valve against over pressure• Microbiological filter at air intake line• Chamber manufactured according to 2014/68/EU• Process evaluation system • Comprehensive self - diagnostic system for possible failures

NC 100 VERTICAL

STEAM STERILIZER POWERED BY N-SmartTM

STEA

M S

TERI

LIZE

RS

• Chamber volume: NC 150: 170 liters / NC 150D: 150 liters• Sterilization temparatures: 121°C, 125°C, 134°C, 136°C• With its double doors, NC 150D is the ideal solution for the small

sterilization centers which are divided as clean and dirty areas• Advanced technology for the sterilization of textile, wrapped or

packed materials, glass and liquid• Integrated steam generator for fast production of steam• Maintenance-free diaphram type powerful vacuum pump • Fractionated pre-vacuum to eliminate all air bubbles and achieve

successful steam penetration• Fractionated post-vacuum for efficient drying of the samples• Air driven gasket by with internal compressor• Pressure measurement of gasket• Delivered with shelf carrier and shelves• Sterilization quality matching the needs of EN 285 European

Standard for Large Steam Sterilizers• Pre-heated chamber to eliminate condensation on the chamber

walls and speed up the heating of the samples • 7 preset programs: Resistant textile, Wrapped porous, Prion,

Quick, Unwrapped, Resistant rubber, Sensitive material, Gravity• 10 free programs and two special programs for liquid sterilization

and drying• Vacuum leakage and Bowie & Dick test programs• Powerful and reliable N-SmartTM microprocessor control system• Operating parameters can be tracked graphically against time• Massive data storage with internal memory which stores the

records of last 500 cycles in detail and 29.500 cycles as summary• Memory for the last 100 failures• USB port to record the operated cycles in the memory to a


optional NuveCloser™ software• Panel type printer to keep the records of the sterilization cycle• Password protected control system, service and calibration menu • Colour of the display changes to red in case of any alarm

condition along with an audible alarm• Reminder for gasket and filter replacement• Remote failure diagnostics by means of NuveCloser™ software• Equipped with Wi-Fi connection for N-Mobile™• Sending e-mails up to five e-mail addresses with the details of

failure• Optional AlerText™ SMS alarm system for ultimate security• Safety valve against over pressure• Microbiological filter at air intake line• Certified chamber according to 2014/68/EU• Process evaluation system • Comprehensive self - diagnostic system for possible failures

NC 150/150D HORIZONTAL STEAM STERILIZERS POWERED BY N-SmartTM

STEA

M S

TERI

LIZE

RS

NC 300/430/570/710NC 430D/570D/710D

STEAM STERILIZERSPOWERED BY N-WiseTM

• Conforms to the requirement of EN 285 European Standard for Large Steam Sterilizers

• Chamber and STU capacity: NC 300: 300 liters, 4 pcs. STU NC 430/430D: 430 liters, 6 pcs. STU NC 570/570D: 570 liters, 8 pcs. STU NC 710/710D: 710 liters, 10 pcs. STU• Ideal design for the steam sterilization of packed or

unpacked surgical and dental instruments, operation linen, glass, plastic, rubber and silicon materials, infusion liquids, microbiological cultures and medical waste

• Chamber, steam jacket, door and steam generator made of 316L stainless steel and conform to 2014/68/EU Pressure Equipment Directive

• Pneumatically controlled door opening with safety system• Steam driven one piece chamber gasket made of silicon• High capacity, low noise water ring vacuum pump for

efficient vacuum • High quality valves, sensors and transmitters for a problem

free and safe operation • Pneumatic valves in the steam lines• Innovative AIR – COOLING system for low water and energy

consumption • N-Wise™ microprocessor control system with 800x480 pixels

7’’ colourful touch screen• Wide screen allows monitoring all related information

regarding sterilization cycle• 7 preset programs, 50 custom made programs • Two test programs: Bowie & Dick and vacuum leakage• Memory for last 1.000 cycles• Independent control system besides the main control

system to record the data related to every cycle • Comprehensive self–diagnostic system for possible system

malfunctions• Service menu to detect the problem in case of a failure• Thermal printer offered as standard• Standard NuveComTM communication unit• Sending e-mails up to five e-mail addresses with the details

of failure• USB port to store data on memory stick• World-wide access via Ethernet port with NuveCloserTM

• Equipped with Wi-Fi connection for N-Mobile™• Optional AlerTextTM GSM alarm module• Password protected menu access• Standard RS 485 connection for PC• Double door versions with 4,7” display on the clean side:

NC 430D, NC 570D and NC 710D

STEA

M S

TERI

LIZE

RS

TEST

CA

BIN

ETS

TK 120/252/600TEST CABINETS

• Three different sizes: 120, 252, 600 liters • Economical solution to simulate real environmental conditions by

controlling temperature, humidity and day & night cycles • Excellent design for different purposes in different sectors such as: Electric and electronic industry, automobile industry, automobile supply

industry, chemical industry, plastic industry, textile industry, pharmaceutical industry, food industry, packaging industry, plant growth, seed germination, incubation and rearing of insects • Wide range of temperature control: -10°C/ +60°C (lights off), 0°C/ +60°C

(lights on) • Programmable humidity range: 20 % - 95 % Rh (between +10°C / +60°C) • Programmable alarm range for temparature and humidity• Powerful illumination by means of the lights located inside the door• Max lighting level: TK 120: 6000 lux, TK 252 / 600: 12000 lux • Programmable lighting timer: 0 - 24 hours • Easy to use programmable microprocessor control system • 10 program memories • 9 program steps for temperature and humidity • User friendly control panel with 128 x 64 pixel LC display • 32 Kb standard, 256 Kb optional memory • Chamber made of stainless steel • Ø25 mm access port • Internal glass door • Humidity produced by the humidity generator • Self-diagnostic system for possible failures • Adjustable safety thermostat for heating • Outlet for printer connection for printing current or stored programs • Optional NuveGrowth™ software for programming and controlling via PC

ID 301 CLIMATIC TEST CABINET

POWERED BY N-Wise™

• Ideal design for the tests at different climatic conditions and stability, artificial aging and storage tests in industries such as electronic, automobile, automobile supply industry, aircraft and aviation, chemical, plastic, textile, pharmaceutical, construction material, food, packaging and military equipment

• Chamber volume: 290 liters • Wide range of temperature control: - 40°C / +150°C • Humidity range: 15 % - 98 % Rh (Between 10°C / 90°C) • Stainless steel chamber resisting sudden temperature

changes • Outer body including the door made of epoxy-polyester

coated stainless steel to resist high humidity levels • Triple insulation consisting of high density injected

polyurethane, glass wool and aluminium layer • Double door seals with heated surface • Door window consists of quintuple glass for perfect

insulation• Heated window against condensation• Interior lighting for easy follow up of the samples• Ø80 mm. access port as standard• Humidity produced by the reliable humidity generator• Accurate humidity measurement even at high

temperatures by sensitive humidity sensor • PID controlled heating and proportional controlled

cooling and humidification • Powerful air circulation system maintaining temperature

and humidity uniformity and stability even at low temperatures

• N-Wise™ control system for continuous optimization of climatic conditions

• Full information with 7’’ colourful touch screen mounted on the door

• Twenty program memories for frequently operated applications

• Programmable 20 steps for each program• Program repetition up to 1-99 times• Programmable ramp function for heating and cooling as

°C/minute or time period • Comprehensive self-diagnostic system to provide the

information regarding any malfunction • Massive data storage with 2 GB internal memory• Adjustable electronic safety thermostat

• External temperature probe connections for four pieces of PT 100 temperature probes that ensure measured temperatures to be displayed on the screen

• Operating parameters can be tracked graphically against time

• Data tracking on PC via N-Wise Closer™ software• USB port to record the data in the memory to an

external memory with selectable time intervals between 1 and 60 minutes

• Ethernet port for remote access through internet by means of optional N-Wise Closer™ software

• Sending e-mails up to five e-mail addresses with the details of failure

• Audible alarms and on-screen messages in plain language, no codes

• For ultimate security optional AlerText™ sends a text message to mobile phones

CLI

MAT

IC T

EST

CABI

NET

• Advanced technology for tests at different climatic and lighting conditions such as plant growth, seed germination, acclimation of plants, culture of plant cells and tissues, genetic manipulations of plants, cultivation of protoplasm and cells, incubation and rearing of insects

• Chamber volume: 316 liters • Wide range of temperature control: -10°C / +60°C (lights off), 0°C/+60°C (lights on) • Programmable humidity range: 20 % / 90 % Rh (between +10°C and +60°C)• Chamber made of stainless steel and glass window in the two

sides• Double layer LOW-E type glass for perfect light transmittance and

insulation• High density injected polyurethane insulation for back and top

sides of the chamber• Powerful lighting from three sides: Left, right and front• Ideal light density by the mixture of daylight and Grolux

fluorescents• Programmable lighting as real time or time period of program

step• Independent programming of lighting for each side with rate

control• Optional LED lighting by the over shelf• Humidity produced by the reliable humidity generator• Accurate humidity measurement even at high temperatures by

sensitive humidity sensor • PID controlled heating and proportional controlled cooling and

drying • Powerful air circulation system maintaining temperature and

humidity uniformity and stability even at low temperatures • N-Wise™ control system for continuous optimization of climatic

conditions • Full information with 7’’ colourful touch screen mounted on the

door• Twenty program memories for frequently operated applications• Programmable 20 steps for each program• Program repetition up to 999 times• Massive data storage with 2 GB internal memory• Operating parameters can be tracked graphically against time• Data tracking and storage on PC via N-Wise Closer™ software• Equipped with Wi-Fi connection for N-Mobile™• USB port to record the data in the memory to an external memory

with selectable time intervals between 1 and 60 minutes• Ethernet port for remote access through internet by means of

optional N-Wise Closer™ software• Sending e-mails up to five e-mail addresses with the details of

failure• Audible alarms and on-screen messages in plain language, no

codes• For ultimate security optional AlerText™ sends a text message to

mobile phones

GC 401GROWTH CHAMBER POWERED BY N-Wise™

GRO

WTH

CH

AM

BER

The Right Choice for the Right Results

Nüve, which was founded in 1968, is one of the leading and outstanding manufacturers ofTurkey in the field of laboratory and sterilization technology.

Since its foundation, Nüve had contributed to the advancement of its products and production processes by means of technical innovations and investments made for research and development.

With a network of 30 distributors in Turkey, Nüve holds the major part of the Turkish market. Strong international focusing; formulated, fast, economic solutions combined with continually evolving quality awareness and customer oriented services form a significant part of Nüve’s business concept. Because of these special features, Nüve has become a fast growing company among its competitors. Having ISO 9001:2015 and ISO 13485:2012 certificates, Nüve is exporting to more than 100 countries by the contribution of its professional work force and very competitive quality and price.

The manufacturing plant is 30 km away from Ankara, the capital city of Turkey and consists of 6000 m2 closed area. High technology machine tools and sheet metal working machines are used for standard production. The quality of the raw materials and parts supplied plays an important role in obtaining a stable production of high quality products.

The product range of Nüve is expanding every year proportional with its continuous research studies. Subject to ever-changing customer perceptions and worldwide technological improvements, also the development of products never ends at Nüve.

The equipment that Nüve manufacture are mostly used in all kinds of medical laboratories, biotechnology, research and quality control laboratories of agriculture, botany and veterinary as well as in the quality control laboratories of various industries such as food, beverage, dairy, chemicals and pharmaceuticals.

With its flexible mass production technology, fast delivery process, well established network ofnational and international distributors, quick and efficient after sales services and unlimited spare part supply, Nüve is ready to meet the needs and demands of its customers all times and just in time.

NÜVE SANAYİ MALZEMELERİ İMALAT VE TİCARET A.Ş.

nuve.com.tr [email protected]

Saracalar Mah. Saracalar Kümeevleri No: 4/2 Akyurt 06750 ANKARA / TURKEY t. +90 312 399 28 30 f. +90 312 399 21 97 08

.201

9/Z1

5.K

34 0

02

laboratory & sterilization technology...• Optional adaptors for 500/800 μl, 200 μl PCR,...

Documents

Transcript of laboratory & sterilization technology...• Optional adaptors for 500/800 μl, 200 μl PCR,...