LA-2007-0385-E (Part 3 of 5) - TÜV SÜD PSB Pte Ltd No. : LA-2007-0385-E Issue No. : 16 (Part 3 of...

TÜV SÜD PSB Pte Ltd Certificate No. : LA-2007-0385-E Testing Services (Part 3 of 5)

Electrical & Electronics Centre (EEC)

(Lighting & Components) Issue No. : 16

1 Science Park Drive

Singapore 118221 Date : 2 February 2018

Page : 1 of 39

FIELD OF TESTING: Electrical Testing

PRODUCTS TESTED TESTS/PROPERTIES STANDARD METHODS

A. Lighting

1. Luminaires Full Test IEC 60598-1: 1999, 2003 + A1: 2006, 2008, 2014 + A1: 2017

IEC 62722-1: 2014

IEC/PAS 62722-1: 2011

EN 13032-1: 2004 + A1:2012

EN 60598-1: 1989, 2004 + A1: 2006, 1997, 2000, 2008 + A11: 2009, 2015

BS 5225 Pt 1: 1975

BS 5225 Pt 3: 1982

BS EN 60598-1: 1997, 2000, 2004, 2008, 2015

CIBSE LG3: 1996

CIE 70: 1987

CIE 84: 1989

CIE 117: 1995

CIE 121: 1996

CNS 14335: 1999

SASO 1318: 1997

SS 263 Part 1: 2000, 2005 + A1: 2007, 2010

SS IEC 60598-1: 2016

SS IEC 62722-1: 2015

TM5: 1980

TR 28-1: 2011

UL 1598: 2008 + revision 2011

Certificate No. : LA-2007-0385-E Issue No. : 16 (Part 3 of 5) Date : 2 February 2018 Page : 2 of 39


AUSTRALIA & NEW ZEALAND

AS/NZS 60598-1: 1998, 2001, 2003, 2013 AS/NZS 60598.1: 2017

AS 1680.3: 1991

ASEAN EE MRA

CS 0034: 2003 [IEC 60598-1: 2003]

MS IEC 60598-1: 1997 [IEC 60598-1:1996, 1999] MS IEC 60598-1: 2003 [IEC 60598-1] MS IEC 60598-1: 2006

PNS 1328: 1996 [IEC 60598-1: 1992]

JAPAN EE MRA

J60598-1 [IEC 60598-1 Ed 4 + A1]

KOREA EE MRA

K 60598-1 [IEC 60598-1: 1999]

2. Electronic Ballasts Full Test IEC 60924: 1990 + A1:1993

IEC 60925: 1989 + A1:1996 + A2:2001, 2001

IEC 60928: 1999

IEC 60929: 1990 + A1:1994 + A2:1996 IEC 60929: 2003, 2006, 2011 + A1:2015

IEC 61347-2-3: 2000 + A1: 2004 + A2:2006 IEC 61347-2-3: 2011 + A1:2016

IEC 61347-2-7: 2000, 2006, 2011

IEC 61347-2-10: 2009

IEC 61347-2-12:2005 + A1:2010, 2010

EN 60925:1991 + Amd 1:1996 + Amd 2:2001

EN 60929: 1992, 2004, 2006, 2011

EN 61347-2-3: 2001 + A1: 2004 + A2: 2006 EN 61347-2-3: 2011

EN 61347-2-7: 2001, 2006, 2012

EN 61347-2-10: 2001 + A1: 2009

EN 61347-2-12: 2005 + A1: 2010

BS EN 60929: 2006 Amd 1:1995, Amd 2: 1996

CNS 13755: 2006



MS IEC 61347-2-3: 2003

SASO 1488: 1999

SASO 1489: 1999

SS 380 Part 1: 1996 Amd 1: 1999 SS 380 Part 2: 1996

SS 490 Part 2: 3: 2002


AS 3134: 1992

AS/NZS 60925:2005

AS/NZS 60928: 2000

AS/NZS 60929: 2000, 2005

AS/NZS 61347.2.3: 2004, 2016

AS/NZS 61347.2.10: 2004

ASEAN EE MRA

MS IEC 60928: 1995 [IEC 60928: 1995]

MS IEC 60929: 1995 [IEC 60929: 1990]

MS IEC 60929: 2008

MS IEC 61347-2-3: 2014

PNS 135-1: 1997 [IEC 60928: 1995-02]

PNS 135-2: 1993 + A1 & A2: 1997 [IEC 60929: 1990 + A1: 1994 + A2: 1996]

PNS IEC 60929:2006

PNS IEC 61347-2-3:2002, Amd 1:2006, 2003

JAPAN EE MRA

J60928 [IEC 60928 Ed 2]

J61347-2-3 [IEC 61347-2-3 Ed 1]

KOREA EE MRA

K 60929 [IEC 60929: 1990]

K 61347-2-3 [IEC 61347-2-3: 2004 + A1: 2006]



3. Ballast Full Test IEC 60920:1990 + A1: 1993 + A2: 1995

IEC 60921: 1988, 2004, 2006 +Amd 1: 1990 + Amd 2: 1994

IEC 62442-1 Ed1, 2011-10

EN 60921: 1991 + A1: 1992 + A2: 1995

EN 60921: 2004 + A1: 2006

EN 61347-2-8: 2001 + A1: 2006

EN 62442-1:2011

MS 1778-1: 2005

MS 1778-2: 2005

MS IEC 60921: 2006

MS IEC 61347-2-8: 2003, 2014

SASO 507: 1988, 2002

SASO 508: 1987, 2002

SS 24: 1987


AS/NZS 60921: 2002

AS/NZS 61347.2.8: 2003

NZHB 4782.2: 2001

NZHB 4783.2: 2001 + A1: 2001

ASEAN EE MRA

MS 141: Part 1: 1992, 1993

MS 141: Part 2: 1992, 1993

MS IEC 60921:2013

PNS IEC 60921:2006

TCVN 8248:2009

JAPAN EE MRA

J60920 [IEC 60920 Ed 1 + A1 & A2]

J61347-2-8: 2002 [IEC 61347-2-8 Ed 1]



4. Emergency and Exit Lights

IEC 60598-2-22: 1990 IEC 60598-2-22: 1997 + A1:2002 + A2: 2008 IEC 60598-2-22: 2014

EN 60598-2-22: 1998 + Amd 1:2003 + Amd 2:2008 EN 60598-2-22: 2014

ISO 3864-1: 2002, 2011

BS 5266-1: 2005, 2011, 2016

BS 5266-7: 1999

BS 5499-1: 2002

BS 5499-3:1990

BS 5499-4: 2000, 2013

BS 5499-7: 1999

BS 5499-10: 2006, 2014

BS 5499-11: 2002

BS EN 1838 1999, 2013

BS EN 60598-2-22: 1990 & 1999, A1: 2002 BS EN 60598-2-22: 1998 + A2: 2008, 2014

Full Test CP 19: 1991 Amd 1 & 2: 1994, 2000, Amd 1: 2003, Amd 2: 2005

SASO 1688: 1999, 2000

SS 263: Part 2: 1996 SS 263: Part 2: 1998, Amd 1: 2003, Amd 2: 2008

SS 508 Part 1: 2004, 2013

SS 508 Part 3: 2004, 2013

SS 508 Part 4: 2013

SS 508 Part 5: 2013

For Clause 10 & 11 SS 563 Part 1: 2010

For Clause 5.2, 5.4, 5.5, 6, 7, 8, 9, 10.6 & 10.7.

SS 563 Part 2: 2010 + A1: 2013

SS IEC 60598-2-22: 2016


AS/NZS 60598.2.22: 2005

AS/NZS 2293.1: 1998, 2005 + A1: 2008 + A2: 2014

AS/NZS 2293.3: 1995 + A1: 1998, 2005 + A1: 2010 + A2: 2012



JAPAN EE MRA

J60598-2-22 [IEC 60598-2-22 Ed 3]

5. Fluorescent Lamps Full Test IEC 60081 Ed 5:1997 + A1:2000 + A2:2003 + A3: 2005 + A4: 2010 + A5: 2013

EN 60081:1998 Amd 1:2002, Amd 2:2003, Amd 3: 2005, Amd 4:1010, Amd 5:2013

EN 61195: 1999

SASO 138: 1979

SASO 139: 1979


AS/NZS 4782.1: 2004, Amd 1: 2006

AS/NZS 4782.2: 2004, Amd 1: 2006

ASEAN EE MRA

CS 008: 2003 [IEC 60081: 2002]

PNS IEC 60081:2001 [IEC 60081:1997], 2006 + Amd 2:2006 + Amd 3:2006

Safety Requirements TIS 956-2533 (1990)

KOREA EE MRA

K 60081 [IEC 60081: 1997]

6. Lamps and Starter Holders

Full Test IEC 60400:1999, 2004, A1:2002, A2:2004 IEC 60400: 2008 + A1: 2011

IEC 60838: 2004 + A1: 2008 + A2: 2011

IEC 60838-1:1997 + A1: 1999 + A2: 2002 IEC 60838-1:2016 + A1: 2017

IEC 60838-2-1:1994 + A1: 1998 + A2:2004

IEC 60838-2-2: 2006

EN 60400: 1996 + A1: 1997 + A2: 1998, 2000, A1: 2002, A2: 2004, 2008 + A1: 2011

MS IEC 60061-2: 2005

MS IEC 60838-1: 2008

MS IEC 60838-2-2: 2008




AS/NZS 4782.1: 2004

AS/NZS 4782.2: 2004

ASEAN EE MRA

CS 0031: 2003 [IEC 60400: 1999]

MS IEC 60400: 1999 [IEC 60400: 1991]

PNS 42: 1997 [IEC 60400: 1996]

JAPAN EE MRA

J60400 [IEC 60400]

J60838-1 [IEC 60838-1 Ed 2]

J60838-2-1 [IEC 60838-2-1 Ed 1]

KOREA EE MRA

K 60400 [IEC 60400: 1999]

7. Glow Starters Full Test IEC 60155: 1993 + A1: 1995 + A2: 2006

EN 60155: 1995 + A1: 1995 + A2: 2007

SASO 146: 1979

SASO 147: 1979


AS/NZS 60155: 2000, Amd 1: 2000, Amd 2:2000

ASEAN EE MRA

MS IEC 60155: 1996 [IEC 60155: 1993]

PNS 45: 1997 + A1: 1997 [IEC 60155: 1993 + A1: 1995]

TIS 183-2547 (2004) [IEC 60155: 1993 + A1: 1995]

JAPAN EE MRA

J60155 [IEC 60155 Ed 4 + Amd 1]

KOREA EE MRA

K 60155 [IEC 60155: 1993]


PRODUCTS TESTED

TESTS/PROPERTIES STANDARD METHODS

8. Tungsten Filament Lamps

Full Test IEC 60064 Ed 6:1993 + A1:2000 + A2:2002 + A3:2005 + A4:2007 + A5:2009, Ed 6.3:2005

EN 60064: 1995, Amd 2: 2003, Amd 3: 2006, Amd 4: 2007, Amd 11: 2007, Amd 5: 2009

SASO 33: 1998

SASO 34: 1998


AS 2325: 1993

ASEAN EE MRA

CS 006: 2003 [IEC 60064: 1993]

PNS 38-2: 1995 [IEC 60064: 1993]

SNI 04-3560-1994 [IEC 60064]

INDIA EE MRA

IS 418: 1978 [IEC 60064: 1973]

KOREA EE MRA

K 60064 [IEC 60064: 1993]

9. Fixed General Purpose Luminaires

Full Test IEC 60598-2-1: 1979 + A1: 1987

EN 60598-2-1: 1989

SASO 1674: 1999

SS 263: Part 3: 1989, A1: 1989 & A2: 1996


AS/NZS 60598.2.1: 1998, 2014 + A1: 2016



ASEAN EE MRA

MS IEC 60598-2-1: 1997 [IEC 60598-2-1: 1979]

JAPAN EE MRA

J60598-2-1 [IEC 60598-2-1 Ed 1 + A1]

KOREA EE MRA

K 60598-2-1 [IEC 60598-2-1: 1979]

10. Recessed Luminaires IEC 60598-2-2: 1997, Amd 1: 1997, 2011

EN 60598-2-2: 1996, Amd 1: 1997, 2012

BS EN 60598-2-2: 1997, 2012

SASO 1675: 1999

Full Test SS 263: Part 4: 2000


AS/NZS 60598.2.2: 2001, 2016

ASEAN EE MRA

MS IEC 60598-2-2: 1998 [IEC 60598-2-2]

JAPAN EE MRA

J60598-2-2 [IEC 60598-2-2 Ed 2 + A1]

KOREA EE MRA

K 60598-2-2 [IEC 60598-2-2: 1997]

11. Luminaires for road and street lighting

Full Test IEC 60598-2-3: 2001, 2002, Amd 1: 2011

EN 60598-2-3: 1994, 2003, Amd 1: 2011

BS EN 60598-2-3: 1994, 2003, Amd 1:2011

AS/NZS 1158.6: 2010 AS/NZS 60598.2.3: 2015

SASO 1676: 1999

SS 263: Part 5: 2000, Amd 1: 2001



JAPAN EE MRA

J60598-2-3 [IEC 60598-2-3 Ed 2 + A1]

12. Luminaires with built-in transformers for filament lamps

IEC 60598-2-6: 1994 + A1: 1996

EN 60598-2-6: 1995

EN 60598-2-6: 1994, A1: 1997

BS EN 60598-2-6: 1995

SASO 1679: 1999

Full Test SS 263: Part 7: 1996, Amd 1: 1998


AS/NZS 60598.2.6: 1998

JAPAN EE MRA

J60598-2-6 [IEC 60598-2-6 Ed 2 + A1]

KOREA EE MRA

K 60598-2-6 [IEC 60598-2-6: 1994]

13. Lighting Chains IEC 60598-2-20:1996, 2002 + A1:1998, A2:2002, 2010 IEC 60598-2-20:2014

EN 60598-2-20: 1997 + A1:1998 + A2:2004, 2010, 2015

BS EN 60598-2-20: 1998, 2010, 2015

SASO 1687: 1999

Full Test SS 263: Part 10: 2000


AS/NZS 60598.2.20: 1998, 2002 + A1:1999

ASEAN EE MRA

CS 0041: 2003 [IEC 60598-2-20: 2001]

MS IEC 60598-2-20:1998 [IEC 60598-2-20:1996]

MS IEC 60598-2-20: 2005

PNS 189: 2000



JAPAN EE MRA J60598-2-20 [IEC 60598-2-20 Ed 1 + A1] 14. Ignitors Full Test IEC 60926: 1995, 2000 IEC 60927: 1996, 2000, 2004, Amd 1: 1999, Amd

2: 2004 IEC 60927:2007 + A1:2013 EN 60927: 1996, Amd 1: 1999, Amd 2: 2004, 2007 SASO 1493: 1999 AUSTRALIA & NEW ZEALAND AS/NZS 60927: 2005 KOREA EE MRA K 60927 [IEC 60927: 2000] 15. AC Capacitors Full Test IEC 61048:1991, 1999 + A1:1995 + A2:1999 IEC 61049: 1991 EN 61048:1993 + A1:1996 + A2:1999 EN 61049:1993 AUSTRALIA & NEW ZEALAND AS/NZS 61048: 2002 AS/NZS 61049: 2002 ASEAN EE MRA MS IEC 61048: 1999 [IEC 61048: 1991] MS IEC 61049: 1999 [IEC 61049: 1991] PNS 1574: 1997 [IEC 61048: 1991] KOREA EE MRA K 61048 [IEC 61048: 1999] 16. Isolating

Transformers Full Test IEC 60742: 1983 + A1: 1992

IEC 61558-1: 1997, 1998 + Amd 1:1998, 2005 + A1:2009, 2009

IEC 61558-2-1: 1997, 2007 IEC 61558-2-2: 1997, 2007 IEC 61558-2-4: 1997, 2009 IEC 61558-2-5: 1997, 2010 IEC 61558-2-6: 1997, 2009 EN 61558-1:1997 + A1:1998, 2005 + A1:2009 EN 61558-2-1: 1997, 2007



EN 61558-2-2: 1998, 2007

EN 61558-2-4: 1997, 2009

EN 61558-2-6: 1997, 2009

BS EN 61558-1: 1998, 2005 + A1: 2009

BS EN 61558-2-1: 1998, 2007

BS EN 61558-2-2: 1998, 2007

BS EN 61558-2-4: 1998, 2009

BS EN 61558-2-5: 1998, 2010

BS EN 61558-2-6: 1998, 2009

MS IEC 61558-1: 2005

MS IEC 61558-2-5: 2006

MS IEC 61558-2-6: 2006

MS IEC 61558-2-17: 2007


AS/NZS 3108:1994

AS/NZS 3108:1994, Amd 1:1995, Amd 2: 1995, Amd 3:1996, Amd 4:1996, Amd 5:1997, Amd 6:1997 & Amd 7:2001

AS/NZS 61558.1 & Amd 2: 2004

AS/NZS 61558.1:2000, Amd 1:2001, Amd 2: 2004, Amd 3:2004, Amd 4:2005, Amd 5:2006, Amd 6:2007, Amd 7:2011

AS/NZS 61558.1:2008 + Amd 1:2009 + Amd 2:2015

AS/NZS 61558.2.4: 2001, 2009 + Amdt 1:2012

AS/NZS 61558.2.6:2001 + Amd 1:2006

AS/NZS 61558.2.6:2009 + Amd 1:2012

ASEAN EE MRA

CS 0046: 2003 [IEC 61558-2-6: 1997]

MS 1700: 1998

PNS IEC 61558-1: 2002

JAPAN EE MRA

J61558-1 [IEC 61558-1 Ed 1]

J61558-2-1 [IEC 61558-2-1:1997]



J61558-2-2 [IEC 61558-2-2:1997]

J61558-2-4 [IEC 61558-2-4 Ed 1]

J61558-2-5 [IEC 61558-2-5 Ed 1]

J61558-2-6 [IEC 61558-2-6 Ed 1]

J61558-2-7 [IEC 61558-2-7 Ed 1]

KOREA EE MRA

K 61558-1 [IEC 61558-1: 1998]

17. Portable general purpose luminaires

Full Test IEC 60598-2-4: 1997 , 2017

EN 60598-2-4: 1997, 1998

BS EN 60598-2-4: 1998

SASO 1677: 1999

SS 263: Part 6: 1998


AS/NZS 3128: 1998 + A1: 1998 + A2: 2002

AS/NZS 60598.2.4: 1998, 2005 + A1: 2007

ASEAN EE MRA

CS 0034: 2003 [IEC 60598-2-4: 1997]

MS IEC 60598-2-4: 2003 [IEC 60598-2-4: 1997]

JAPAN EE MRA

J60598-2-4 [IEC 60598-2-4 Ed 2]

KOREA EE MRA

K 60598-2-4 [IEC 60598-2-4: 2001]

18. DC or AC supplied electronic step-down convertors for filament lamps

Full Test IEC 61046: 1993 + A1: 1995

EN 61047:1992 + A1:1996 + A2:2001, 2004

IEC 61347-2-2: 2000, 2006 + A1: 2005 + A2: 2006, 2011 EN 61347-2-2: 2001 + A1: 2006 + A2: 2006; 2012




AS/NZS 61046: 2001

AS/NZS 61047: 2001

AS/NZS 61347.2.2: 2004, 2007

19. Approval & test specification – Luminaires(lighting fittings)

Full Test AUSTRALIA & NEW ZEALAN

AS 3137: 1992 + Amd 1: 1992 + Amd 2: 1995

20. Approval & test specification – Fluorescent lamp ballasts

Full Test AUSTRALIA & NEW ZEALAND

AS 3168: 1991 + Amd 1: 1991

ASEAN MRA

TIS 23-2521 (1978)

21. Electric Shaver supply units

Full Test EN 61558-2-5:1998, 2010

BS EN 61558-2-5:1998, 2010


AS/NZS 61588.2.5:2003, 2011 + A1:2012

22. Bayonet Lampholder Full Test IEC 61184: 1997, Amd 1:2000, Amd 2: 2004

EN 61184: 1997, Amd 1: 2001, Amd 2: 2004

BS EN 61184: 1995

SS 125: 2001


AS 3117: 1994

AS 3119: 1994

JAPAN EE MRA

J61184 [IEC 61184 Ed 1 + Amd 1]



23. Lamp Controlgear Full Test IEC 61347-1:2000, 2003 + Amd 1:2003, 2007 + A1:2010 + A2:2012, 2015

EN 61347-1:2001 + A1:2007, 2008 + A1:2011 + A2:2013, 2015

SS 490 Part 1: 2001


AS/NZS 61347.1: 2002, 2016

ASEAN EE MRA

MS 769: 1982

MS IEC 61347-1:2003, 2012

PNS IEC 61347-1:2002 + A1:2006

JAPAN EE MRA

J61347-1 [IEC 61347-1 Ed 1]

KOREA EE MRA

K 61347-1 [IEC 61347-1: 2000]

K 61347-1 [IEC 61347-1: 2003 + A1: 2003]

24. Magnetic Ballast Full Test IEC 61347-2-8: 2000, 2006

EN 61347-2-8: 2001, A1: 2006

K 61347-2-8 [IEC 61347-2-8: 2006]

SS 490 Part 2: 8: 2001

SS 491: 2001

ASEAN EE MRA

PNS 12-3: 2000

PNS 2050-4:2007

PNS IEC 61347-2-8:2002

25. Magnetic Ballast for Discharge Lamps

Full Test IEC 60922:1997, 1989 + A1:1990 + A2:1992

SASO 691: 1994

SASO 692: 1992, 1994

SASO 1491: 1999




AS/NZS 60922: 1998

JAPAN EE MRA

J60922 [IEC 60922 Ed 1 + A1 & 2]

26. Ballasts for Discharge Lamps

Full Test IEC 61347-2-9:2000 + A1:2003 + A2:2006, 2012

EN 61347-2-9:2001 + A1:2003 + A2:2006, 2013


AS/NZS 61347.2.9:2004

ASEAN EE MRA

MS IEC 61347-2-9:2003

PNS 105: 1986

JAPAN EE MRA

J61347-2-9 [IEC 61347-2-9 Ed 1]

KOREA EE MRA

K 61347-2-9 [IEC 61347-2-9:2000]

27. Self-ballasted Lamps Full Test IEC 60968:1999, 2012, 2015

IEC 60969:1988 + A1:1991 + A2:2000, 2016

EN 60968:1990 + A1:1993 + A2:1999, 2013, 2015

EN 60969:1993 + A1:1993 + A2:2000


AS/NZS 4847.1: 2010

AS/NZS 4847.2: 2010

AS/NZS 60968: 2001

AS/NZS 60969: 2001



ASEAN EE MRA

CS 0027: 2003 [IEC 60968: 1988]

MS IEC 60968:2006 (CONFIRMED:2011)


PNS 603-1: 1993 + A1: 2001 [IEC 60968:1988 + A1:1991 + A2:1999]

PNS 603-2: 1993 + A1: 2001 [IEC 60969: 1988]

PNS 2050-2:2007

PNS IEC 968:2006

PNS IEC 969:2006

SNI 04-6504-2001 [IEC 60968]

INDIA EE MRA

IS 15111 Part 1: 2002 [IEC 60968: 1988]

IS 15111 Part 2: 2002 [IEC 60969: 1988]

JAPAN EE MRA

J60968 [IEC 60968 Ed 1 + A1 & A2]

KOREA EE MRA

K 60968 [IEC 60968: 1999]

K 60969 [IEC 60969: 2001]

K 61347-1 [IEC 61347-1: 2003 + A1: 2003]

28. Electronic Transformer

Full Test IEC 61047:2001, 2004

IEC 61047:1991 + A1:1996 + A2:2001

EN 61047:1992 + A1:1996 + A2:2001, 2004

AS/NZS 61047: 2001

29. Single-Capped Lamp Full Test IEC 60901 Ed 2: 1996 + A1: 1997 + A2: 2000 + A3: 2004 + A4: 2007 + A5: 2011 + A6:2014

IEC 60901 Ed 2.2: 2001

EN 60901: 1996, Amd 1: 1997, Amd 2: 2000, Amd 3: 2004, Amd 4: 2008




AS/NZS 60901: 2002 & 2003

ASEAN EE MRA


PNS 1261: 1995 [IEC 60901: 1992]

PNS 2050-1-2:2006

PNS IEC 901:2001 + Amd 1:2006 + Amd 2:2006 + Amd 3:2006

TCVN 7896:2008

KOREA EE MRA

K 60901 [IEC 60901: 2001]

30. Handlamps Full Test IEC 60598-2-8:1996 + A1:2000 + A2:2007, 2013

EN 60598-2-8:1997 + A1:2000 + A2:2008, 2013

BS EN 60598-2-8:1997 + A2:2008, 2013

SASO 1681: 1999

SS 263 Part 13: 1997 + A1: 2000


AS/NZS 60598.2.8: 1998 & 2002, 2015

ASEAN EE MRA

CS 0036: 2003 [IEC 60598-2-8: 1996]

MS IEC 60598-2-8: 1998 [IEC 60598-2-8: 1991]

MS IEC 60598-2-8: 2006

JAPAN EE MRA

J60598-2-8 [IEC 60598-2-8 Ed 2]

31. Double-Capped Fluorescent Lamps

Full Test IEC 61195: 1999 + A1:2012 + A2:2014, 2012, 2014

EN 61195: 1999 + A1:2012 + A2:2015, 2013, 2015



ASEAN EE MRA

PNS 2050-1-1:2007 + Amd 1:2013

PNS IEC 61195:2006

TCVN 8249:2009

JAPAN EE MRA

J61195 [IEC 61195 Ed 2]

KOREA EE MRA

K 61195 [IEC 61195: 1999]

32. Starting Devices for Discharge Lamps

Full Test IEC 61347-2-1:2000, 2006 + Amd 1:2005 + Amd 2:2013, 2013

EN 61347-2-1:2001 + A1:2006


AS/NZS 61347.2.1: 2002

33. Portable Child Appealing Luminaires

Full Test IEC 60598-2-10: 1987 +A1: 1990 & A2: 1995, 2003

EN 60598-2-10: 2003

BS EN 60598-2-10: 1989, 2003

SASO 1683: 1999


AS/NZS 60598.2.10: 1998, 2015

34. Extra Low Voltage Lighting Systems for filament Lamps

Full Test IEC 60598-2-23: 2001

EN 60598-2-23: 1996 + A1: 2000

BS EN 60598-2-23: 1997

SASO 1689: 1999


AS/NZS 60598-2-23: 2002



35. Transformers for Toys

Full Test IEC 61558-2-7: 1997, 2007

EN 61558-2-7: 1997, 2007

BS EN 61558-2-7: 1998, 2007

MS IEC 61558-2-7: 2007


AS/NZS 61558.2.7: 2001, 2008, Amd 1:2012

36. Electrical Equipment Full Test AUSTRALIA & NEW ZEALAND

AS/NZS 3100:1997 & 2002, Amd 1:2003, Amd 2:2004, Amd 3:2005

AS/NZS 3100:2009 + A1:2010 + A2:2012 + A3: 2014 + A4: 2015

37. IP Test Full Test IEC 62262: 2002

IEC 60529: 2001, Amd 2: 2013

EN 60529: 1991 + A1: 2000 + A2: 2013

EN 62262: 2002

BS EN 60529: 1992 + A2: 2013

BS EN 62262: 2002

AS 60529: 2004

ISO 20653:2013

SS IEC 60529: 1989

USCG 162.060-30 (clause a7)

Method 506.4 Procedure I and III (Rain)

Method 512.4 Procedure I (Immersion)

MIL-STD-810F: 2000

Method 506.5 Procedure I Note: For sample size up to 200mm x 200mm.

Method 506.5 Procedure III (Rain)

Method 512.5 Procedure I (Immersion)

MIL-STD-810G: 2008




AS 60529: 2004

JAPAN EE MRA

J60529 [IEC 60529 Ed 2]

38. Approval and Test Specification – Starters for Fluorescent Lamps

Full Test AUSTRALIA & NEW ZEALAND

AS 3138: 1993 + A1: 1994

ASEAN MRA

TIS 183-2528: 1985

39. Luminaries – Particular requirements for luminaires for swimming pools and similar applications

Full Test IEC 60598-2-18: 1993 + A1: 2011

EN 60598-2-18: 1994 + A1: 2012

BS EN 60598-2-18: 1994, Amd 1:2012

SASO 1685: 1999

SS 263 Part 11: 1997


AS/NZS 60598.2.18: 1998

40. Luminaries – Particular requirements for air- handling luminaires

Full Test IEC 60598-2-19: 1981 + A1: 1987 + A2: 1997

EN 60598-2-19: 1989, Amd 2: 1998

SASO 1686: 1999

SS 263 Part 12: 1997


AS/NZS 60598.2.19: 2001

41. Luminaires – Particular requirements for floodlights

Full Test IEC 60598-2-5: 1998, 2015

EN 60598-2-5: 1989 & 1998, 2015

BS EN 60598-2-5: 1998, 2015

SASO 1678: 1999

SS 263 Part 8: 1998




AS/NZS 60598.2.5: 2002

42. Luminaires – Particular requirements for portable luminaires for garden use

Full Test IEC 60598-2-7:1982 + A1:1987 + A2:1994

EN 60598-2-7:1989, Amd 2:1996, Amd 3:1997

BS EN 60598-2-7:1997

SASO 1680/1999

SS 263 Part 9:1990 + A1:1990 + A2:1996


AS/NZS 60598.2.7:2005

43. Edison screw Lampholders Full Test IEC 60238: 2002

ASEAN EE MRA

PNS 80: 1997 [IEC 60238: 1996]

KOREA EE MRA

K 60238 [IEC 60238: 2000]

44. Single-capped fluorescent lamps -safety specifications

Full Test IEC 61199: 1999, 2011 + A1:2012 + A2:2014, 2012, 2014

EN 61199: 1999, 2011 + A1:2013 + A2:2015

KOREA EE MRA

K 61199 [IEC 61199: 1999]

ASEAN EE MRA

PNS IEC 61199:2006

45. Auxiliaries for lamps – Ballasts for discharge lamps (excluding tubular fluorescent lamps) – Performance requirements

Full Test IEC 60923: 1995, 2001, 2005 + A1: 2006

EN 60923: 1996, 2005, Amd 1: 2006




AS/NZS 60923: 1998

46. Safety of small power transformers, power supply units and similar – Particular requirements for bell and chime transformers

Full Test IEC 61558-2-8: 1998 IEC 61558-2-8: 2010

EN 61558-2-8: 1998 EN 61558-2-8: 2010

BS EN 61558-2-8: 1999 BS EN 61558-2-8: 2010


AS/NZS 61558.2.8: 2001, 2011 + Amdt 1:2012

47. Safety of power transformers, power supply units and similar products – Particular Requirements for transformers class III handlamps for tungsten filament lamps

Full Test IEC 61558-2-9: 2002, 2010

EN 61558-2-9: 2003, 2011

BS EN 61558-2-9: 2003, 2011

BS EN 61558-2-17: 1998


AS/NZS 61558.2.9: 2003, 2011 + Amdt 1:2012

AS/NZS 61588.2.17: 2001

48. Safety of power transformers, power supply units and similar– Particular requirements for transformers for switch mode power supplies

Full Test IEC 61558-2-17: 1997

EN 61558-2-17: 1997

JAPAN EE MRA

J61558-2-17 [IEC 61558-2-17 Ed 1]

49. Incandescent Lamps – Safety specifications tungsten filament lamps for domestic and similar general lighting purposes

Full Test except clause 2.9 of IEC 60432-1.

IEC 60432-1: 1999

IEC 60432-2: 1999

SASO 33: 1998



ASEAN EE MRA

CS 025: 2003 [IEC 60432-1: 1999]

PNS 38-1: 1995 [IEC 60432-1:1993+ A1:1995]

TIS 4 Part 1-2529: 1986

KOREA EE MRA K 60432-1 [IEC 60432-1: 1999]

50. Electrical supply track systems for luminaries

Full Test IEC 60570: 2003 + A1:2017

EN 60570: 2003

BS EN 60570: 2003

SASO 1672: 1999

SASO 1673: 1999

KOREA EE MRA

K 60570 [IEC 60570: 2003]

51. Measurement method of total input power of ballast-lamp circuits

Full Test IEC 62442-1: 2011

EN 50294: 1998 + A1: 2001 + A2: 2003

EN 62442-1: 2011

52. Performance of electrical lighting equipment – Ballasts for fluorescent lamps – Method of measurement to determine energy consumption and performance of ballasts lamp circuits

Full Test AUSTRALIA & NEW ZEALAND AS/NZS 4783.1: 2001 (R2013)

53. Performance of electrical lighting equipment – Ballasts for fluorescent lamps – Energy performance standards labelling and minimum energy requirements

Full Test AUSTRALIA & NEW ZEALAND AS/NZS 4783.2: 2002 (R2013)



54. Automatic electrical controls for household and similar use

Full Test IEC 60730-1:2003 + A1:2003 + A2:2007

EN 60730-1:2000 + Amd 1:2004, Amd 2:2008, Amd 11:2002, Amd 12:2003, Amd 13:2004, Amd 14:2005, Amd 15:2007, Amd 16:2007

BS EN 60730-1:1995, 2001

JAPAN EE MRA

J60730-1 [IEC 60730-1 Ed 2 + A1]

55. Aquarium Luminaries Full Test IEC 60598-2-11:2005, 2013

EN 60598-2-11:2005, 2013

BS EN 60598-2-11:2005, 2013

56. D.C. or A.C. supplied electronic controlgear for LED modules

Full Test IEC 61347-2-13:2006, 2014 + A1:2016

IEC 62384:2011

IEC 62442-3:2014

EN 61347-2-13: 2006, 2014

EN 62384: 2006 + A1: 2009

EN 62442-3:2014

J61347-2-13 [IEC 61347-2-13: 2006]


AS/NZS IEC 61347.2.13: 2013

ASEAN EE MRA

MS IEC 61347-2-13:2012

MS IEC 62384:2011, 2012

57. Miscellaneous electronic circuits used with luminaries

Full Test IEC 61347-2-11: 2001 + A1:2017

EN 61347-2-11: 2001


AS/NZS 61347.2.11: 2003



58. Mains socket-outlet mounted nightlights

Full Test IEC 60598-2-12: 2006, 2013

EN 60598-2-12: 2006, 2013

BS EN 60598-2-12: 2006, 2013


AS/NZS 60598-2-12: 2013, 2015

59. Ground recessed luminaries

Full Test IEC 60598-2-13: 2006 + A1: 2011 + A2: 2016

EN 60598-2-13: 2006 + A1: 2012 + A2: 2016

BS EN 60598-2-13: 2006, Amd 1:2012 + A2: 2016

60. Power Supplies Full Test AUSTRALIA & NEW ZEALAND

AS/NZS 4665.1: 2005 + A1: 2009

AS/NZS 4665.2: 2006 + A1: 2009

61. LED modules for general lighting – Safety specifications

Full Test IEC 62031:2008 + A1:2012, 2012 + A2:2014

EN 62031: 2008 + A1:2012, 2012 + A2:2015

SASO IEC 62031: 2009

62. Electrical and Photometric Measurements of Solid-State Lighting Products

Full Test IES LM-79-08

63. Measuring Lumen Maintenance of LED Light Sources

Full test except ageing process

IES LM-80-08

64. Adaptors Full test K 61558-1 [IEC 61558-1: 2005]

K 61558-2-5 [IEC 61558-2-5: 1997]

K 61558-2-6 [IEC 61558-2-6: 1997]

65. Safety of power transformers, power supplies, reactors and similar products - Part 1: General

requirements and tests

Full test IEC 61558-1: 2005 + A1: 2009 AS/NZS 61558.1: 2008 + A1: 2009



66. Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V

- Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers

Full test IEC 61558-2-4: 2009 EN 61558-2-4: 2009


- Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers

Full test IEC 61558-2-6: 2009


- Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers

Full test IEC 61558-2-13: 1999, 2009 EN 61558-2-13: 2000, 2009

69. Safety of power transformers, power supply units and similar

- Particular requirements for transformers and power supplies for Toys

Full test AS/NZS 61558.2.7: 2008 + A1:2012



70. Switch mode power supplies

Full test IEC 61558-2-16:2009 + A1:2013, 2013

EN 61558-2-16: 2009 + A1:2013, 2013

AS/NZS 61558.2.16: 2010 + A1: 2010 + A2: 2012 + A3:2014

71. Household electrical appliances – Measurement of standby power

Full test IEC 62301:2005, 2011

EN 62301:2005, 2011

AS/NZS 62031:2014

72. Energy Star Program Criteria – Requirements for Solid State Lighting Luminaires Eligibility Version 1.1 Version 1.2 Version 1.3

Luminaire Efficacy (Light Output, Input Power), Colour Rendering Index (CRI), Chromaticity Correlated and Colour Temperature (CCT)

ANSI C78.377-2008

ANSI C82.2-2002

CIE 13.3-1995

CIE 15: 2004

IESNA LM-16

IESNA LM-58-94

IESNA LM-79-08 sections 9 and 12

Power Factor ANSI C82.77-2002

Zonal Lumen Density IESNA LM-79-08 section 10

Lumen Maintenance (L70) IESNA LM-80-08

Color Spatial Uniformity and Color Maintenance

CIE 15: 2004

IESNA LM-16

IESNA LM-58-94

IESNA LM-79-08 section 12

Maximum Measured Power Supply Case or Manufacturer Designated Temperature Measurement Point (TMPPS) Temperature

ANSI/UL 153 UL 1598

Temperature Measurement Point (TMPLED)

UL1598-2008



Electromagnetic and Radio Frequency Interference

FCC 47 CFR Part 15/18

Transient Protection IEEE C62.41-1991

Output Operating Frequency, Noise

Per ENERGY STAR Solid State Lighting Luminaires Version 1.1

73. Requirements for Integral LED Lamps Eligibility Criteria – Version 1.1 Version 1.2 Version 1.3 (Omnidirectional / Directional & Decorative) Version 1.4

Correlated Colour Temperature (CCT) and DUV, Colour Rendering Index (CRI), Colour Maintenance, Power Factor, Minimum Luminous Efficacy, Minimum Light Output, Colour Spatial Uniformity (for directional lamps), Minimum Light Output (for BR, ER, K and R lamps)

ANSI C78-377-2008

CIE 13.3-1995

IESNA LM-79-08 sections 9 and 12

Luminous Intensity Distribution, Minimum Centre Intensity (for PAR and MR16 lamps)


Lumen Maintenance

Elevated Temperature Test per ENERGY STAR CFL Version 4.0


IESNA LM-80-08

Rapid Cycle Stress Test IESNA LM-65-01


LM-79-08

Electromagnetic and Radio Frequency Interference

FCC 47 CFR Part 15

Transient Protection C62.41-1991



In Situ Temperature Measurement Test (ISTMT)

Per ENERGY STAR Integral LED Lamps Version 1.2

UL1993-2009

Minimum Operating Temperature, LED Operating Frequency, Audible noise

Per ENERGY STAR Integral LED Lamps Version 1.2

74. Energy Star Program Requirements for CFLs Eligibility Criteria – Version 4.0, 4.1, 4.2 (Bare, covered and globe CFLs only)

a) Lamp Power (Watts) & Configuration

IESNA LM-9-1999

b) Correlated Colour Temperature

IESNA LM-66-00 (for single-ended CFLs)

c) Colour Rendering Index (CRI)

CIE 13.3-1995

d) Power Factor IESNA LM-9-1999


e) Rapid Cycle Stress Test ANSI C78.5-2003


f) Lumen Maintenance ANSI C78.5-2003

IESNA LM-40-01

IESNA LM-65-01

IESNA LM-66-00

g) Lamp Life ANSI C78.5-2003

IESNA LM-40-01

IESNA LM-65-01

h) Run-up Time, Starting Time

ANSI C78.5-2003

i) Electromagnetic Interference

FCC 47 CFR Part 2 and Part 18



j) Transient Protection IEEE C62.41-1991

k) Operating Frequency Per ENERGY STAR CFLs Version 4

75. Energy Star

Program Requirements for Decorative Light Strings Eligibility Criteria – Version 1.4: March 2008

Inspection

Per ENERGY STAR Decorative Light Strings Version 1.4, and

a. Number of Lamps per String. b. Replaceable Lamps. c. Rated for indoor or

indoor/outdoor applications. d. Warranty

ASTM G154-05

Electrical Requirements CIE 84-1989

e. Input Power f. Over-Voltage

CIE 127-1997

IESNA TM-16-05

Lifetime Requirements

g. Maintained Light Output h. Failed Lamps

Weathering Requirements

i. Maintained Light Output j. Failed Lamps

Product Packaging for Consumer Awareness Requirements

k. Product Suitability l. Product Description m. Correlated Colour Temperature

for White-light Strings

76. Energy Star

Program Requirements for Luminaires (Light Fixtures) (Solid State Lighting) Eligibility Criteria – Version 1.1

Efficacy, output, zonal lumen distribution, colour angular uniformity, luminaire photometry.


Colour angular uniformity IESNA LM-58-94 IESNA LM-58-11




Colour Rendering Index (CRI) CIE 13.3-1995

Correlated Colour Temperature (CCT)

CIE 15-2004

Efficacy, output, Lumen Maintenance, CCT, CRI, Colour maintenance

IESNA LM-79-08

Light Source Life, Lumen Maintenance, Colour maintenance

IESNA LM-80-08

77. Photo-biological Safety of Lamps and Lamp Systems

Full test IEC 62471: 2006

IEC/TR 62471-2: 2009

IEC/TR 62778:2012, 2014

EN 62471: 2008

AS/NZS 62471:2011

AS/NZS 62471.2:2012

78. Self-ballasted LED-lamps for general lighting services

Full test IEC 62560:2011 + A1:2015

IEC 62612:2013 + A1: 2015

IEC/PAS 62612:2009

EN 62560:2012 + A1:2015

EN 62612:2013

AS/NZS IEC 62560:2014, 2017

CNS 15436:2012

CNS 15630:2012

MS IEC 62560:2012

MS 62612:2012 (P)

PNS IEC 62560:2012

PNS IEC 62612:2014

SS 609 : Part 1 : 2015

SS 609 : Part 2 : 2015



79. LED modules for general lighting – Performance requirements

Full test IEC/PAS 62717: 2011

IEC 62717: 2014 + A1:2015

ISS IEC 62717:2015

MS IEC 62717:2012

TR 27: 2011

80. Projecting long term lumen maintenance of LED light source

Full Test IES TM-21-11

81. Phosphorescent pigments and Products – Measurement and Marking at the Producer

Full Test ASTM E2072 - 04 ASTM E2072 - 14

ASTM E2073 – 10

DIN 67510-1: 2009

ISO 16069:2004

82. Luminaire performance – Particular requirements for LED Luminaires

Full Test

IEC 62722-2-1: 2014

IEC/PAS 62722-2-1: 2011

EN 62722-2-1:2016

MS 62722-2-1: 2012

SS IEC 62722-2-1:2015

TR 28-2-1: 2011

83. Maritime navigation and radio-communication equipment systems

a) IP Test b) Clauses 8.8 and 12.1

(low voltage equipment only)

IEC 60945: 2002

EN 60945: 2002

84. Central Power Supply Full Test EN 50171:2001

BS EN 50171: 2001

85. Safety Requirement for Secondary Batteries and Battery Installations. Part 2: Stationary Batteries

Full Test EN 50272-2:2001

BS EN 50272-2: 2001



86. Signage Full Test ISO 3864-4:2011

SS 508 Part 4:2013

87. Double-capped LED lamps designed to retrofit linear fluorescent lamps

Full Test IEC 62776: 2014

EN 62776: 2015

SS IEC 62776:2015

88. Test Method for LED lamps, LED luminaires and LED Modules

Full Test EN 13032-4: 2015

CIE S 025/E: 2015

89. Safety tests for isolating transformers for the supply of medical locations

Full Test IEC 61558-2-15: 2011

EN 61558-2-15: 2012

AS/NZS 61558.2.15: 2012

90. Light Emitting Diode (LED) Equipment for use in Lighting Applications

Full Test CAN/CSA-C22.2 No. 250.13

UL 8750:2015



B. Components

1. Fixed Resistors for use

a) Fixed low-power non-wirewound resistors

All clauses IEC 60115-2: Part 2: 1982

b) Fixed power resistors All clauses IEC 60115-4: Part 4: 1982 + A1:1993

c) Fixed precision resistors All clauses IEC 60115-5: Part 5: 1982

d) Fixed resistor networks with individually measurable resistor

All clauses IEC 60115-6: Part 6: 1983 + A1:1987

e) Fixed resistor networks in which not all resistors are individually measureable


f) Fixed chip resistors All clauses IEC 60115-8: Part 8: 1989

2. Fixed Capacitors for use in Electronic Equipment

a) Generic Specification All clauses except 4.28 IEC 60384-1: Part 1: 1999

b) Fixed metallized polyethylene-terephthalate film dielectric D.C. capacitors

All clauses except 4.28 IEC 60384-2: Part 2: 1982 + A1:1987 + A2:1992

c) Fixed tantalum chip capacitors All clauses IEC 60384-3: Part 3: 1989

d) Aluminium electrolytic capacitors with solid or non-solid electrolyte

All clauses IEC 60384-4: Part 4: 1998 A1:1992

e) Fixed metallized polycarbonate film dielectric D.C. capacitors

All clauses IEC 60384-6: Part 6: 1987 + A2:1992

f) Fixed capacitors of ceramic dielectric, Class 1

All clauses IEC 60384-8: Part 8: 1988 A1:1993



g) Fixed capacitors of ceramic dielectric, Class 2


h) Fixed multilayer ceramic chip capacitors

All clauses IEC 60384-10: Part 10: 1989: A1:1993

i) Fixed polyethylene Terephthalate film dielectric D.C capacitors


j) Fixed polycarbonate film dielectric metal foil D.C capacitors


k) Fixed polypropylene film dielectric metal foil D.C. capacitors


l) Fixed tantalum capacitors with non-solid or solid electrolyte

All clauses IEC 60384-15: Part 15: 1982 + A1:1987 + A2:1992

m) Fixed metallized polypropylene film dielectric D.C. capacitors

All clauses IEC 60384-16: Part 16: 1982 + A1:1987 + A2:1992

n) Fixed metallized polypropylene film dielectric A.C and pulse capacitors


3. Piezoelectric Ceramic Filter

a) Generic specification in the IEC quality assessment system for electronic components

Qualification Approval All clauses

IEC 61261: Part 1: 1994

4. Piezoelectric Ceramic Resonators

a) Generic specification in the IEC quality assessment system for electronic components

Qualification Approval All clauses

IEC 61253: Part 1: 1993



5. Semiconductor Devices Discrete Devices and Integrated Circuits

a) Sectional specification for discrete devices

All clauses IEC 60747-11:1985 + A1:1991 + A2:1996

b) Rectifier diodes All clauses IEC 60747-2:1983 + A1:1992 + A2:1993

c) Signal (including switching) and regulator diodes

All clauses IEC 60747-3:1985 + A1:1991 + A2:1993

d) Thyristors All clauses IEC 60747-6:1983 + A1:1991 + A2:1994

e) Bipolar transistors All clauses IEC 60747-7: 1988 + A1:1991 + A2:1994

f) Field-effect transistors All clauses IEC 60747-8: 1984 + A1:1991



C. Photovoltaic Balance of System – PV Inverter

1. Safety of power converters for use in photovoltaic power systems – Part 1: General requirements.

Full test IEC 62109-1: 2010;

EN 62109-1: 2010;

BS EN 62109-1: 2010

2. Safety of power converters for use in photovoltaic power systems – Part 2: Particular requirements for inverters.

Full test IEC 62109-2: 2011;

EN 62109-2: 2011;

BS EN 62109-2: 2011

3. Overall efficiency of grid connected photovoltaic inverters.

Full test EN 50530: 2010 + A1: 2013

BS EN 50530: 2010

4. Photovoltaic (PV) systems – Characteristics of the utility interface.

Full test IEC 61727: 2004;

5. Test Procedure of islanding prevention measures for utility-interconnected photovoltaic inverters.

Full Test IEC 62116: 2008;

EN 62116: 2011;

BS EN 62116: 2011

6. 0 Photovoltaic systems – Power conditioners – Procedure for measuring efficiency.

Full Test IEC 61683: 1999;

EN 61683: 2000;

BS EN 61683: 2000

7. Requirements for the connection of micro- generators in parallel with public low-voltage distribution networks.

Full Test EN 50438: 2007;

BS EN 50438: 2007


Approved Signatories

Tan Lee Heng - All tests in Section B.

Tan Heng Khoon - All tests in Section A except A90.

Derrick Sim - All tests in Section A except A90 and all tests in Section C.

Ong Ching Yen (Ms) - For A1, A2, A4, A9-13, A17, A19, A23, A30, A33-34, A36, A39-42, A55-56 and A58-59.

Adrian Kwok - For A1, A4, A9-13, A17, A19, A30, A33-34, A36, A37, A39-42, A55, A58-59, A62, A84 and A85.

Yeo Eng Teong - For A61 and A90.

Chua Su Chen (Ms) - For A90.

Ng Chin Heng - For A90.

Ng Chee Huat - For A90.

Note: This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025. A laboratory's fulfilment of the requirements of ISO/IEC 17025 means the laboratory meets both the technical competence requirements and management system requirements that are necessary for it to consistently deliver technically valid test results. The management system requirements in ISO/IEC 17025 are written in language relevant to laboratory operations and operate generally in accordance with the principles of ISO 9001.

LA-2007-0385-E (Part 3 of 5) - TÜV SÜD PSB Pte Ltd No. : LA-2007-0385-E Issue No. : 16 (Part 3 of...

Documents

Transcript of LA-2007-0385-E (Part 3 of 5) - TÜV SÜD PSB Pte Ltd No. : LA-2007-0385-E Issue No. : 16 (Part 3 of...