KORVAL Catalogue(11년 5월)
Transcript of KORVAL Catalogue(11년 5월)
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
KORVAL / www.korval.co.kr
Greeting / Contents
Laboratory- Function
- Hydrostatic
- Cryogenic
- Flow Rate
- Leakage
- Visual and Dimension
- Set pressure
We will make it for customer impressed not customer satisfaction KO
RVAL / www.korval.co.kr
Greeting / Contents
History of Company ………………………………… 4
Certinficate …………………………………………… 5
High Pressure Control Valve ……………………… 6
Cryogenic Control Valve …………………………… 7
Cryogenic Safety Relief Valve ……………………… 8
Safety Relief Valve …………………………………… 9
Pneumatic Control Valve ………………………… 10
3Way Pneumatic Control Valve ………………… 11
Electric Motorized Valve ………………………… 12
3Way Electric Motorized Valve ………………… 13
3Way Rotary Valve ……………………………… 14
3Way Rotary Valve ……………………………… 15
Temperature Regulating Valve ………………… 16
3Way Temperature Regulating Valve …………… 17
Temperature Sensor ……………………………… 18
Pressure Reducing Valve ………………………… 19
Pressure Reducing Valve ………………………… 20
SRS (Strainer&Reducing&Safety) Valve ………… 21
Greeting
Contents
Since establishment in 1993, we, KORVAL Co.,LTD, has led the Industry marine business in high quality, The quickest responsiveness, and product’s innovation. With patented and proven precise KORVAL control valves, and custommade engineering with special application capabilities, KORVAL is a leading source supplier for the full variety and unique of Control valves for Industrial and Marine business, especially, Off-shore business and power plant
Based on worldwide, KORVAL employs a highly skilled expert and diverse work force.Certified ISO9001/ C.E the company prides itself on theKNOWHOW of its employees,the technologies and manufacturing talent of itsengineers, and the cost saving innovations of management. According to customer’s needs, we, KORVAL Control valves, are built to keep your job performing smoothly.
Exacting quality control management and on-time delivery systems make it easier to coordinate the many different delivery needs and aspects of large Small-scale construction projects.
Our on-staff expert engineering manufacturing systems result in lower operating costs, reducing pricing, and Custom-made capabilities that rival any in the industrial marine business.
We promise that we would be the best valve manufacturing company in worldwide through satisfying our customer’s needs and increasing our competitiveness. We always appreciate your thoughtful consideration and support, and look forward to your continuous encouragement and support.
Thank you
Primary Pressure Regulating Valve …………… 22
Shut Off Valve …………………………………… 23
Shut Off Valve …………………………………… 24
Change Over Valve ……………………………… 25
Hydraulic Rotary Actuator ……………………… 26
Hydraulic Transmitter ………………………………… 27
3Way Transfer Valve/Backflow Preventer Valve 28
Auto Air Vent & Trap/Steam Injector …………… 29
Thermostatic Element/Vacuum Breaker ……… 30
Solenoid Valve/Shut Off Flap …………………… 31
Y-Strainer ………………………………………… 32
Steam Trap ………………………………………… 33
Backflow Preventer Valve ……………………… 34
Solenoid Valve …………………………………… 35
E/P Controller (E&P-01, 02) …………………… 36
Accessories ……………………………………… 37
Business Partners ………………………………… 40
Global Network …………………………………… 42
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
KORVAL / www.korval.co.kr
History of Company
History of Company
12_05_04_01_
09_07_03_
11_03_ 01_
08_ 07_06_ 01_
06_ 05_ 04_
09_
05_ 01_ 09_01_
12_
12_02_
11_05_02_
04_
Super High Pressure Control Valve Development (2500 lbs-6”), Off-Shore Installing Flow Capacity Test Equipment & Design And 3D Simulation Analy Sistem Set UpCryogenic Safey Relief Valve Development And SupplyAssignment For The Most Supplier Of Control Valve To Shipward And Engine Maker In
R&D Center Establised / Maker Listing In 30 Shipward In KoreaAwarding Small And Medium Enterprise Best PrizeEstablished The aluminizing manufacture line on 3th factory.
Established 3th Factory on Dadae Mujigae Industrial Complex. Prize-winning (Ulsan and Busan district) that is superior medium and small corporation. Removed and Expanded to Dadae Mujigae Industrial Complex.
Supplied the products to 18 Domestic Shipyard, China Shipyard and Other country’s Shipyard. Developed E&P Controller. LNG Vessel CR Cryogenic Safety Relief valve Development start. Supplied to develop Ball valve with Rotary Actuator. (ENGINE PART)
Registration of patent for Temperature Control valve (Korean Intellectual Property Office). Supplied to develop Automatic Shut-off valve for LNG Carrier(SHI) & DSME. Obtained Community Europe(CE) Approval by BVQI.
Developed Pneumatic Level Regulator (Small and Medium Business Administration).
Supplied Power Plant Components & Engine Valve for Marine Engine. Moved and Expanded to Dadae Mujigae industrial Complex. Designated as The Valve Manufacture for Gas Safety Valve.Succeeded to Develop Temperature Regulating Valve.
12 Applied Enterprise Resource Planning(ERP) System to the Company’s System.
Changed Company’s name from Halla to KORVAL(Korean valve)Co., Ltd.Exported Control valve (China/Japan).
Acquired ISO 9001:1994 Approved By SPEC.Supplied Control valve to Domestic Shipyard.Produced Automatic and Control valve.
Established Halla. Co.,
2009.
2010.
2008.
2007.
2005.
2003.
2002.
2001.
2000.
1999.
1996.
1993.
We will make it for customer impressed not customer satisfaction KO
RVAL / www.korval.co.kr
Certificate
Certificate
Nuclear plant, Gas / Oil Plant, Chemical Plant, Power Plant, Marine Industry, etc.
FIELD OF BUSINESS
PATENT CERTIFICATES
QUALTITY SYSTEM CERTIFICATES
CLASSIFICATION CERTIFICATES
ACCREDITATIONS
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
6
KORVAL / www.korval.co.kr
High Pressure Control Valve
High Pressure Control ValveAccording to high velocities, depending on the type of fl uid fl ow and caused corrosion, erosion. Valve suitable for use in harsh environmental conditions, and fl ow caused by cavitation, noise and high performance valve that is preventing.
● FEATURE 1. Higher pressure can be precisely controlled. 2. Is uniquely effective in the control. 3. Manual’s emergency operation is possible handle. 4. The purpose of the system to change the structure of TRIM can increase the
effi ciency of the system. 5. The exact test is reliable products. 6. QUICK CHANGE TRIM replacement parts is easy to apply.
Specification
Model K2C-HPCYType Pneumatic Diaphragm, Pneumatic Cylinder
Applicable Fluids Water, Sea Watrer, Steam, Gas
Applicable Press./Temp. Max. 350 Bar / Max. 550℃
MaterialBody A216 WCB
Trim Stainless Steel
Flow characteristics Equal Percentage, Linear
Rangeability 30:1, 50:1
Size ANSI 2500LBS - 15~300mm, RTJ FLANGE, BUTTERWELDING
Accessories (Option) ● Controller(E/P, P/P) ● Positioner(E/P, P/P) ● Lock Up Valve ● Sensor(Press, Temp) ●Air Set
Dimensions (mm)Size
mm(inch) d K C D f t n-h H H1 H2 H3 A
15(1/2”) 15 35.1 88.9 133 6.4 30.2 4-22
Temperature, pressure, fluid is applied differently depending
on the conditions
20(3/4”) 20 42.9 95.3 140 6.4 31.8 4-22
25(1”) 25 50.8 108 159 6.4 35.1 4-26
40(1.1/2”) 40 73.2 146.1 203 6.4 44.5 4-32
50(2”) 50 91.9 171.5 235 6.4 50.8 8-29
65(2.1/2”) 65 104.6 196.9 267 6.4 57.2 8-32
80(3”) 80 127 228.6 305 6.4 66.5 8-35
100(4”) 100 157.2 273.1 356 6.4 76.2 8-42
150(6”) 150 215.9 368.3 48. 6.4 108 8-54
200(8”) 200 269.7 483.3 552 6.4 127 12-54
250(10”) 250 323.9 539.8 673 6.4 165.1 12-67
300(12”) 300 381 619.3 762 6.4 184.2 12-74
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights (Stainless Cast Steel)are approximate and applied ANSI 2500LBS. 3. The fl anges shall conform to nominal pressure ANSI B16.5.
K2C-HPCY
We will make it for customer impressed not customer satisfaction
7
KORVAL / www.korval.co.kr
Cryogenic Control Valve
High Pressure Control Valve
Specification
Model KCC-DDType Pneumatic Diaphragm
Applicable Fluids Liquid Gas(NG, C2H4, O2, N2, CO2)
Applicable Press./Temp. Max. 70 Bar / -196~100℃
MaterialBody A351 CF8M
Trim Stainless Steel
Flow characteristics Equal Percentage, Linear
Rangeability 30:1, 50:1
Size ANSI 900LBS - 15~300mm
Operating pressure 0.4~1.0 kgf/㎠ / 0.4~2.0 kgf/㎠
Accessories (Option) ● Controller(E/P, P/P) ● Positioner(E/P, P/P) ● Sensor(Press, Temp) ● Air Set
Dimensions (mm)
Liquid Gas(NG, C2H4, O2, N2, CO2)
Cryogenic Control ValvePNEUMATIC DIAPHRAGM TYPE valve operation to add liquid nitrogen cryogenic fl uids, such as pressure and fl ow control valves, etc. are capable of precision control.
● FEATURE 1. Precise control of fl uid is possible. 2. Manual’s emergency operation is possible handle. 3. The product is reliable and accurate TEST reliability. 4. The purpose of the system according to the optimal design of TRIM
increase the effi ciency of the system is functioning correctly.
Sizemm(inch) d K C D f t n-h D L D1 D2 H1
15(1/2”) 15 35.1 82.6 121 6.4 22.4 4-22
Temperature, pressure, fluid
is applied differently depending
on the conditions
20(3/4”) 20 42.9 88.9 130 6.4 25.4 4-22
25(1”) 25 50.8 101.6 149 6.4 28.4 4-25
40(1.1/2”) 40 73.2 124 178 6.4 31.8 4-29
50(2”) 50 91.9 165.1 216 6.4 38.1 8-25
65(2.1/2”) 65 104.6 190.5 244 6.4 41.1 8-29
80(3”) 80 127 190.5 241 6.4 38.1 8-25
100(4”) 100 157.2 235 292 6.4 44.5 8-32
150(6”) 150 215.9 314.5 381 6.4 55.6 12-31
200(8”) 200 269.7 393.7 470 6.4 63.5 12-39
250(10”) 250 323.9 469.9 546 6.4 69.9 16-39
300(12”) 300 381 533.4 610 6.4 79.2 20-39
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights (Stainless Cast Steel)are approximate and applied ANSI 900LBS. 3. The fl anges shall conform to nominal pressure ANSI B16.5.
KCC-DD
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
8
KORVAL / www.korval.co.kr
Cryogenic Safety Relief ValveA safety relief valve is a pressure relief valve characterized by rapid opening pop action or by opening generally proportional to the increase in pressure over the opening pressure. When the pressure increase in the line, this valve protect the system to discharge the pressure more than Over pressure Our, KORVAL, CRYOGENIC SAFETY RELIEF VALVE has many strong point (especially it has a durability for change and/or transformation) because it use special low material at type And it’s designed and manufactured by all sorts of rule.
KPR-DL, DMThe large power to small power display one’s ability for pilot type. It is product with correct operation, compact size, vacuum breaker, no leakage. The product have performance of maximum at low pressure. It has many strong point and it is the one to use on the ‘CRYOGENIC TANK’.
KPR-SHIThe is product of ”CONVENTIONAL TYPE”. It is the one to design specially on the disc and a seat (the trim part) for high pressure, no leakage, Minimum back pressure. So the valve can stand on high durability against impacts and corrosion.
Cryogenic Safety Relief Valve
Model KSC-DL, DM KSC-SHType Pilot Operated Conventional
Applicable Fluids Liquified Gas, LNG, LPG, LEG, Equivalent Vapor
Applicable Pressure (Bar) 0.01~0.2, 0.2~2.5 1~33
Applicable Temperature(℃) -196~100 -196~100
MaterialBody A351 CF8M / A352 A351 CF8M
Trim Stainless Steel / A6061 Stainless Steel
Diaphragm TEFLON -
Flange Rating/Size ANSI 150 LBS, RF / 2”x3”~12”x16” ANSI 150(300_ LBS, RF 1/2”x1”~4”x6”
Applicable Rule IGC, ANSI, API, ASME, Classifacation
Seat Leakage Allowable API 527
Specification
Dimensions (mm)
Model Sizemm(inch) d L H1 Weight
Abt(Kg)
KPR-DL -DM
2”x 3” 150 105 570 57
3” x4” 180 115 607 68
4”x 6” 200 140 683 98
6”x6” 315 140 799 107
6”x8” 315 175 799 155
8”x10” 400 200 880 225
10”x12” 500 230 960 330
12”x16” 560 250 1049 578
KPR-SH
1/2”x1 120 105 223 18
1”x2” 120 105 223 18
1.1/2”x2” 133 127 321 23
1.1/2”x2.1/2” 134 127 321 26
1.1/2”x3” 138 132 330 28
2”x3” 144 137 353 31
3”x4” 181 170 353 69
4”x6” 216 195 590 69
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
KSC-DL, DM
KSC-SH
KSC-DL,DM KSC-SH
We will make it for customer impressed not customer satisfaction
9
KORVAL / www.korval.co.kr
Cryogenic Safety Relief Valve
Safety Relief Valve
Safety Relief ValveA safety relief valve is pressure relief characterized by rapid opening action or by opening generally proportional to the increase in pressure over the opening pressure. When the pressure increase in the line, this valve protect the system to discharge the pressure more than Over pressure. It can use on either compressible or incompressible fluids, depending on design, adjustment or application. The valve have variety of cap according to airtight of emergency handle lever part.
KSR seriesIt designed to operate under high pressure/temperature. It is full bore type, so it has large capacity. The valve has a disc and a seat stellite and high durability against impacts and corrosion. It has variety of cap according to airtight of emergency handle lever part for sealing the leakage when it open.
KSA-CCIt designed to operate under low pressure/temperature. It is, LOW LIFT type, and it use on often open the valve in a line. Small size & right and easy handling.
Specification
Model KSR-OL, CL, CC KSA- CCType Full Bore Low Lift
Applicable Fluids Air, Water, Liquid, Steam
Applicable Press. / Temp. 40 kgf/㎠ / 220℃ 20 kgf/㎠ / 220℃ 15 kgf/㎠ / 150℃
MaterialBody Ductile Cast Iron, Bronze, Cast Steel
Trim Stainless Steel
Size 15~40 mm 15~200 mm 15~25 mm
Dimensions (mm)
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Model Sizemm(inch) d1 d2 L G H Weight
Abt(Kg)
KSR-CC -CL -OL
15x25 (1/2”x1”) 15 25 90 85 202 88
20x25 (3/4”x1”) 20 25 90 85 202 15
25x40 (1”x1.1/2”) 25 40 116 105 223 16
25x50 (1”x2”) 25 50 116 105 223 22
40x65 (1.1/2”x2.1/2”) 40 65 130 127 321 27
50x80 (2”x3”) 50 80 138 137 353 45
65x100 (2.1/2”x4”) 65 100 162 156 490 65
80x125 (3”x5”) 80 125 175 170 535 93
100x150 (4”x6”) 100 150 212 195 590 155
125x200 (5”x8”) 125 200 230 227 725 235
150x200 (6”x8”) 150 200 230 227 725 1
KSA-CC15(1/2”) PT 3/4” 1/2” 40 51 145 1.2
20(3/4”) PT 1” 3/4” 40 54 145 1.5
25(1”) PT 1~3/4”
1” 45 60 145 495
Cap Type
KSA-CC
KSR-OL KSA-CC
KSA-OL KSA-CL KSR-CC
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
10
KORVAL / www.korval.co.kr
Pneumatic Control ValveIt is designed to use to convert flow rate fluids and/or keep available temperature and/or control the capacity of fluid in system. Also the trim is part designed proportion control case type. So it is proportion control valve. The actuator part use “Pneumatic Diaphragm type” so the actuator is great in ability of control the valve.
● FEATURE 1. Precision control is possible 2. Emergency operating is possible with emergency handle devices. 3. It is not influenced by change of differential pressure because it is balance type. 4. It can manufacture and/or supply the trim part as the specific of control. 5. The stellite processing on the Trim part makes a valve strongly.
SpecificationModel K2C-DP
Type Pneumatic Diaphragm
Applicable Fluids Steam, Water, Oil
Applicable Press./Temp. 20 kgf/㎠ / 220℃
Material Body Ductile Cast Iron, Bronze, Cast Steel
Trim Stainless Steel
Flow characteristics Equal Percentage, Linear, Quick opening
Rangeability 30 : 1 / 50 : 1
Size 15 ~ 350 mm
Operating pressure 0.2 ~ 1.0 kgf/㎠ / 0.4~2.0 kgf/㎠
Accessories (Option) ● Controller(E/P, P/P) ● Positioner(E/P, P/P) ● Sensor(Pr., Temp.) ● Air set
Dimensions (mm)Size
mm(inch) d L D1 D2 H1 H2 G WeightAbt(Kg)
15(1/2”) 15 136 271 160 372 172 58 17
20(3/4”) 20 140 271 160 372 172 58 19
25(1”) 25 150 271 160 384 172 63 21
32(1.1/4”) 32 190 271 160 417 172 79 27
40(1.1/2”) 40 190 271 160 417 172 79 39
50(2”) 50 222 355 200 512 195 106 48
65(2.1/2”) 65 290 355 200 514 195 123 65
80(3”) 80 310 355 200 546 195 141 78
100(4”) 100 350 465 200 676 195 162 110
125(5”) 125 390 465 200 683 195 176 150
150(6”) 150 451 465 200 731 195 213 185
200(8”) 200 543 520 280 895 303 253 232
250(10”) 250 688 520 280 925 303 270 270
300(12”) 300 737 520 280 960 303 290 350
350(14”) 350 889 520 315 1050 345 320 410
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Pneumatic Control Valve
K2C-DP
We will make it for customer impressed not customer satisfaction
11
KORVAL / www.korval.co.kr
3Way Pneumatic Control Valve
3Way Pneumatic Control ValveThis valve’s function is the operating of change the direction of flow and/or keep a Available temperature in a system. The Dividing and mixing type is available by a Installation condition. The operation actuator part operated by “Pneumatic diaphragm type” So it can control the flow and/or temperature accuracy and we can division the way to establishment. It is best to control a temperature.
● FEATURE 1. Precision control is possible 2. It is not influenced by change of differential pressure because it is balance type. 3. Emergency operating is possible by the emergency handle devices. 4. This valve has two different function (different ability) . 5. Superior to durability and semi-permanent.
Specification
Model K3C-DPType Pneumatic Diaphragm
Applicable Fluids Water, Oil
Applicable Press./Temp. 16 kgf/㎠ / 180℃
Differential Press. 3.0 kgf/㎠
OperationDividing Air less (A→B) / Air supply (A→C)
Mixing Air less (B→A) / Air supply (C→A)
Flw characteristics Linear, On-Off
Rangeavility 30 : 1
Sixe 15~200 mm
Air supply press. 0.2 ~ 1.0 kgf/㎠ / 0.4~2.0 kgf/㎠
MaterialBody Ductile Cast Iron, Bronze, Cast Steel
Trim Stainless Steel
Accessories(Option) ● Controller(E/P, P/P) ● Positioner(E/P, P/P) ● Sensor(Pr., Temp.) ● Air set
Dimensions (mm)
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Sizemm(inch) d L D1 D2 H1 H2 G Weight
Abt(Kg)15(1/2”) 25 142 271 160 384 172 128 21
32(3/4”) 32 185 271 160 417 172 163 27
40(1.1/2”) 40 185 271 160 417 172 163 30
50(2”) 50 196 355 200 512 195 173 45
65(2.1/2”) 65 282 355 200 540 200 200 57
80(3”) 80 302 355 200 550 200 209 62
100(4”) 100 346 465 200 680 202 232 88
125(5”) 125 382 465 200 690 202 256 175
150(6”) 150 443 465 200 740 202 298 220
200(8”) 200 539 520 280 895 303 340 245
150(6”) 150 451 465 200 731 195 213 185
200(8”) 200 543 520 280 895 303 253 232
K3C-DP
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
12
KORVAL / www.korval.co.kr
Electric Motorized ValveIt is designed to use to convert flow rate fluids and/or keep available temperature and/orcontrol the capacity of fluid in system. The actuator of operation part used Electric Motortype. So the installation is easy. The trim part is designed proportion control case type.Also it is balance type. So it is proportion control type valve.That’s why it can control accuracy.
● FEATURE 1. Installation is easy at operation only electric supply is required. 2. Size is small because of balance construction of trim parts. 3. The capacity is large 4. Emergency operating is possible to use emergency handle devices. 5. Precision control is possible because it is proportion control type.
SpecificationModel K2C-MT
Type Electric Motor
Applicable Fluids Steam, Water, Oil
Applicable Press. / Temp. 16 kgf/㎠ / 220℃
Power supply / Input Signal 220V, 110V / 4~20mA
Material Body Ductile Cast Iron, Bronze, Cast Steel
Trim Stainless Steel
Flow characteristics Equal Percentage, Linear, Quick opening
Rangeability 30 : 1 / 50 : 1
Size 15~300 mm
Accessories (Option) ● Controller(P.I.D) ● Sensor(Press., Temp.) ● Control Box
Dimensions (mm)Size
mm(inch) d L H G WeightAbt(Kg)
1/2”) 15 136 450 58 18
20(3/4”) 20 140 450 58 20
25(1”) 25 150 460 63 23
32(1.1/4”) 32 190 470 69 25
40(1.1/2”) 40 190 470 69 26
50(2”) 50 200 475 82 29
65(2.1/2”) 65 230 485 92 46
80(3”) 80 262 505 125 53
100(4”) 100 350 1050 350 75
125(5”) 125 390 1050 350 102
150(6”) 150 451 1200 400 125
200(8”) 200 543 1450 550 158
250(10”) 250 661 1450 550 185
300(12”) 300 737 1450 550 240
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights( Cast Steel) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Electric Motorized Valve
K2C-MT
We will make it for customer impressed not customer satisfaction
13
KORVAL / www.korval.co.kr
3Way Electric Motorized Valve
3Way Electric Motorized Valve3way motor control valve distinguish dividing and mixing type. It is used to convert flow rate fluids or keep available temperature in system. Operation Part of actuator operated detail acting to valve with electric-motor so it can control accuracy. It can divide to way to establishment.
● FEATURE 1. Installation is easy only electric supply. 2. Actuator size is small and it is balance type of trim parts. 3. Emergency operating is possible with emergency handle devices. 4. Precision is high by proportion control.
Specification
Model K3C-MTType Electric Motor
Applicable Fluids Water, Oil
Applicable Press. / Temp. 10 kgf/㎠ / 150℃
Power Supply / Input Signal 110V, 220 V / 4~20mA
Differential Press. 2.0 kgf/㎠
OperationDividing Signal Less (A→B) / Signal Supply (A→C)
Mixing Signal Less (B→A) / Signal Supply (C→A)
MaterialBody Ductile Cast Iron, Cast Steel
Trim Stainless Steel
Rangeablilty 30 : 1
Flow characteristics Linear, On-Off
Size 25~200 mm
Accessories (Option) ● Controller(P.I.D) ● Sensor(Pr., Temp.) ● Control Box
Dimensions (mm)
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Sizemm(inch) d L D H G Weight
Abt(Kg)25(1”) 25 152 140 385 115 27
32(1.1/4”) 32 182 160 450 150 28
40(1.1/2”) 40 182 160 470 150 29
50(2”) 50 216 160 490 158 32
65(2.1/2”) 65 282 160 520 200 50
80(3”) 80 301 160 520 209 57
100(4”) 100 346 160 572 232 76
125(5”) 125 382 180 809 256 142
150(6”) 150 443 180 857 292 195
200(8”) 200 539 180 900 340 250
150(6”) 150 451 465 200 731 185
200(8”) 200 543 520 280 895 232
K3C-MT
Electric Motorized Valve
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
14
KORVAL / www.korval.co.kr
Model K3R-CNType Pneumatic Cylinder Positioner
Applicable Fluids Water, Oil
Applicable Press. / Temp. Max. 10 kgf/㎠ / 80℃
OperationDividing (A) Inlet / (B) By-Pass / (C) Cooler
Mixing (A) Outlet / (B) By-Pass / (C) Cooler
MaterialBody Ductile Cast Iron, Bronze
Trim Bronze
Air supply press. 1.4 kgf/㎠
Rangeability 30 : 1
Flow characteristics Linear, On-Off
Size 80 ~ 600mm
Accessories ● Controller(E/P, P/P) ● Positioner(E/P, P/P) ● Sensor(Temp.) ● Air Set
3Way Rotary ValveIt is available use to temperature control for freezing and heating system.Operation part’s actuator operated detail acting to valve with pneumaticElectric cylinder operating. So it can control accuracy. And it is economical.It can divide to way to establishment.
● FEATURE 1. Large capacity has compared with equal size. 2. Size small and easy Installation. 3. Emergency operating is possible with emergency handle devices. 4. Correctness temperature maintenance.
Specification
Dimensions (mm)Size
mm(inch) d L H H1 H2 G WeightAbt(Kg)
80(3”) 80 292 146 418 140 330 70
100(4”) 100 296 148 418 145 340 75
125(5”) 125 332 166 418 170 365 105
150(6”) 150 362 181 418 180 395 121
200(8”) 200 450 225 522 190 485 155
250(10”) 250 516 258 547 205 510 252
300(12”) 300 660 330 590 300 545 384
350(14”) 350 706 353 625 310 560 432
400(16”) 400 820 410 647 388 635 495
450(18”) 450 960 480 647 425 670 650
500(20”) 500 1024 512 722 435 685 695
550(22”) 550 1090 545 866 540 840 1100
600(24”) 600 1200 600 1021 650 1010 1250
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
3Way Rotary Valve
K3R-CN
We will make it for customer impressed not customer satisfaction
15
KORVAL / www.korval.co.kr
3Way Rotary Valve
3Way Rotary ValveIt is available to use to temperature control for freezing and heating system.Operation part’s actuator operated detail acting to valve with electric motortype so it can controlled accuracy. It can divide to way to establishment.
● FEATURE 1. Large capacity have compared with equal size.
2. Size small and easy Installation.
3. Emergency operating is possible with emergency handle devices.
4. Correctness temperature maintenance.
5. Installation is easy at operation only electric supply.
Specification
Model K3R-MOType Electric Motor
Applicable Fluids Water, Oil
Applicable Press. / Temp. Max.10 kgf/cm2 / 80
Power Supply / Input Signal 110V, 220 V / 4~20mA
OperationDividing (A) Inlet / (B) By-Pass / (C) Cooler
Mixing (A) Outlet / (B) By-Pass / (C) Cooler
MaterialBody Ductile Cast Iron, Bronze
Trim Bronze
Rangeability 30 : 1
Flow characteristics Linear
Size 80 ~ 600mm
Accessories E/P Controller(P.I , P.I.D) Sensor(Temp.)
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
K3R-MO
Dimensions (mm)Size
mm(inch) d L G H1 H2 WeightAbt(Kg)
80(3”) 80 292 146 470 145 50
100(4”) 100 296 148 483 145 58
125(5”) 125 332 166 483 170 84
150(6”) 150 362 181 497 180 108
200(8”) 200 450 225 530 220 148
250(10”) 250 516 258 550 260 204
300(12”) 300 660 330 571 272 292
350(14”) 350 706 353 600 285 358
400(16”) 400 820 410 710 388 495
450(18”) 450 960 480 760 388 615
500(20”) 500 1024 512 800 470 730
550(22”) 550 1090 545 1000 590 1150
600(24”) 600 1200 600 1250 690 1310
3Way Rotary Valve
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
16
KORVAL / www.korval.co.kr
Temperature Regulating ValveThese models are consist of valve and sensor, It is proportion control valve and it is operated by set temperature for the fluid temperature regulating.This valve will install with our company’s “Heat sensor (AHS series)”. This valves are for heating purpose and used on hot water tanks, heat exchangers and heavy oil heating on vessels.
● FEATURE 1. The installation is very simple. 2. Simply construction and semi-permanent with less malfunction. 3. Being self-control type, so an auxiliary power is not required. 4. Operating can be used under the condition of high / differential pressure. 5. Pilot type has considerably large capacity. (KTR-PL) 6. The temperature variation is small, so it can be controlled precision. 7. This is proportion control type valve by temperature change. 8. The manual handle which is used for both Emergency handle and bypass
is provided.
Specification
Model KTR-DT KTR-BL KTR- PLType Direct Balance Pilot
Applicable Fluids Steam, Hot Water, Thermal Oil
Applicable Press./Temp. 10 kgf/㎠ / 220℃ 16 kgf/㎠ / 220℃
MaterialBody Ductile Cast Iron, Bronze, Cast steel
Trim Stainless Steel
Size 15~25mm 32~50mm 65~125mm
Accessories ● Heat sensor ● By-Pass Handle(Option)
Dimensions (mm)
Model Sizemm(inch) d L H1 H2 Weight
Abt(Kg)
KTR-DT15(1/2”) 15 136 140 58 8
20(3/4”) 20 140 140 58 10
25(1”) 25 150 152 63 13
KTR-BL32(1.1/4”) 32 190 185 79 17
40(1.1/2”) 40 190 185 79 19
50(2”) 50 200 200 82 23
KTR-PL
65(2.1/2”) 65 230 280 92 26
80(3”) 80 310 235 150 43
100(4”) 100 350 268 171 53
125(5”) 125 390 273 183 65
KTR-DT, BL
KTR-PL
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Temperature Regulating Valve
KTR-DT
We will make it for customer impressed not customer satisfaction
17
KORVAL / www.korval.co.kr
Temperature Regulating Valve 3Way Temperature Regulating ValveK3T-DTThese models are consist of 3way valve and sensor. Adjust flow of fluid by sensortemperature at set, it will keep the temperature at set.The heat sensor is “AHS series”. This valve use mixing/dividing type by valveinstall status, it normally use on cooling System.
● FEATURE 1. Being self-control type, So an auxiliary power is not required. 2. Installation is very simple and this one is economical. 3. It is the proportion control type valve by temperature change. 4. Heating /cooling is possible by one valve.
K3T-WAIt is consist of valve and sensor. This is “internal” sensor type and it keep settingTemperature with change of temperature control to regulating flow rate.This valve use mixing/dividing type by valve install status and It usually used on cooling system.
● FEATURE 1. Being self-control type, no auxiliary power is required. 2. The installation is very easy because it is internal sensor type. 3. No malfunction and economical. 4. The heating/cooler is possible with both of mixing/dividing type by install change. 5. This is proportion control type valve by temperature change.
SpecificationModel K3T-DT K3T-WA
Type Direct Wax
Applicable Fluids Water, Oil, Liquid
Applicable Press./Temp. 7 kgf/㎠ / 110℃
Differential Press. 1.0 kgf/㎠ 3.0 kgf/㎠
Operation Dividing Normal (A→B) / High Temp. (A→C)
Mixing Normal (B→A) / High Temp. (C→A)
Size 15~50 mm 40~150 mm
Material Body Ductile Cast Iron, Bronze, Cast Steel
Trim Stainless Steel
Accessories ● Heat sensor ● By-Pass Handle(Option) Manual(Option)
Dimensions (mm)
Model Sizemm(inch) d L H1 H2 Weight
Abt(Kg)
K3T-DT
15(1/2”) 15 154 155 115 10
20(3/4”) 20 158 155 115 12
25(1”) 25 160 155 115 15
32(1.1/4”) 32 190 160 150 20
40(1.1/2”) 40 190 160 150 23
50(2”) 50 220 165 160 26
K3T-WA
40(1.1/2”) 32 178 165 160 21
50(2”) 40 225 171 160 27
65(2.1/2”) 65 246 161 160 21
80(3”) 80 259 167 160 27
100(4”) 100 395 213 170 35
125(5”) 125 481 237 190 44
150(6”) 150 481 250 190 51
K3T-DT
K3T-DT
K3T-WA
K3T-WA
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
3Way Temperature Regulating Valve
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
18
KORVAL / www.korval.co.kr
Temperature SensorThis sensor is temperature proportion type. The sensor part sense the temperature, and the liquid will expands or contracts by the temperature change. It can operate the main shaft stem in the sensor pocket and It’ll make a valve open/close by this working. This item usually used to Temperature Regulating valve by Korval.
● FEATURE AHS-BT : This type is that the temperature control part is on the sensor part and only use liquid. Standard type. AHS-BV : It is possible to set the temperature on the valve and it can free to use based on location of sensing
system establishment. It is liquid only. AHS-CT : It is possible to set the temperature on the valve and it react sensitive , only use air. AHS-CV : It is possible to set the temperature on the valve, it can do accuracy set temperature because of dual
sensor therefore it can cover the temperature change, only use air. Usually it used on place of wide temperature change.
Specification
Model AHS-BT AHS-BV AHS-CT AHS-CV AHS-WAHeated Fluids Water, Oil Air, Gas Water, Oil
Adjust Temp. Range(℃) 0~60, 50~110, 80~140 -20~60, 20~80 20 ~ 96
Capillary Tube Length(m) 3, 5, 7, 8 ~ 15(Option) 5(P)+7(S), 7(P)+10(S) Internal Sensor
Accessories ● Sensor Pocket -
Temperature Sensor
AHS-BT
AHS-CT
AHS-BV
AHS-CV
We will make it for customer impressed not customer satisfaction
19
KORVAL / www.korval.co.kr
Pressure Reducing Valve
Model KPR-PL KPR-HPType Pilot Cylinder
Applicable Fluids Steam, Air Air
Applicable Press. / Temp. 20 kgf/㎠ / 220℃ 40 kgf/㎠ / 80℃
Max. Reducing Ratio 10 : 1 10 : 1
MaterialBody Ductile Cast Iron, Bronze, Cast Steel Cast Steel
Trim Stainless Steel
Size 15~150mm 15~50 mm
Pressure Reducing ValveThe product designed in consideration of stable operation displays its superior performance under the severe condition of fluid change. It severe pressure reducing from inlet’s high pressure to outlet’s low pressure. And it is self-acting type valve.
KPR-PLIt usually use in steam and/or gas. The operating is pilot type so the capacity of valve is large. And the outlet pressure change with inlet Pressure change is small.
KPR-HPIt’s Air only. Designed to use under high pressure by pilot control Type operating. So the off-set is small and Simply construction and semi-permanent with ess malfunction.
Specification
Dimensions (mm)
Model Sizemm(inch) d L H1 H2 Weight
Abt(Kg)
KPR-PL
15(1/2”) 15 165 270 68 8
20(3/4”) 20 169 270 68 9
25(1”) 25 170 270 68 12
32(1.1/4”) 32 192 285 90 17
40(1.1/2”) 40 192 285 90 18
50(2”) 50 210 290 95 22
65(2.1/2”) 65 290 330 136 30
80(3”) 80 310 360 150 41
100(4”) 100 350 370 170 71
125(5”) 125 390 480 185 86
150(6”) 150 451 590 222 108
KPR-HP
15(1/2”) 15 145 360 75 12
20(3/4”) 20 145 360 75 13
25(1”) 25 150 370 78 14
32(1.1/4”) 32 182 400 96 15
40(1.1/2”) 40 182 400 96 17
50(2”) 50 210 410 110 18
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
KPR-PL
KPR-HP
KPR-PL
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
20
KORVAL / www.korval.co.kr
This valve reduce from inlet high pressure to outlet low set pressure. So it can keep the system’s required pressure. The valve is self-acting type.
KPR-CYIt is available on both fluid & gas. It is external sensor type. It is an optimum of valve type to use under liquid of high viscosity the maximum reducing rate is large and Simply construction and semi-permanent.
KPR-TUfluid(liquid) only. The operating is pilot type so the capacity of valve is large. It can use under high temp / press. The operating part is small as used piping line size.
Specification
Model KPR-CY KPR-TUType Cylinder Throttle Unit (Pilot)
Applicable Fluids Air, Water, Oil
Applicable Press. / Temp. 20 kgf/㎠ / 150℃
Max. Reducing Ratio 10 : 1
MaterialBody Ductile Cast Iron, Bronze, Cast Steel
Trim Stainless Steel
Size 15~80mm 100~200 mm
Dimensions (mm)
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Pressure Reducing Valve
Model Sizemm(inch) d L H1 H2 Weight
Abt(Kg)
KPR-CY
15(1/2”) 15 136 220 60 7
20(3/4”) 20 140 220 60 8
25(1”) 25 150 255 65 14
32(1.1/4”) 32 190 285 79 19
40(1.1/2”) 40 190 285 79 21
50(2”) 50 200 303 86 23
65(2.1/2”) 65 230 410 92 38
80(3”) 80 262 415 125 49
KPR-HP
100(4”) 100 350 390 170 71
125(5”) 125 390 400 185 86
150(6”) 150 456 430 222 108
200(8”) 200 543 445 242 135
KPR-CY
Pressure Reducing Valve
KPR-HP
KPR-CY
We will make it for customer impressed not customer satisfaction
21
KORVAL / www.korval.co.kr
SRS (Strainer&Reducing&Safety) Valve
Pressure Reducing Valve
Model KPR-SRType Diaphragm Type
Applicable Fluids COMPRESSOR AIR
Applicable Press. / Temp. 40 kgf/㎠ / 80℃
Max. Reducing Ratio 10:1
MaterialBody CAST STEEL
Trim STAINLESS STEEL
Size 15~50mm
SRS (Strainer&Reducing&Safety) ValveSRS valve means multi-function valve.It`s including Safety & Reducing & StrainerAlso lt has pressure gauge on the valve. So this is an unit valve.
● FEATURE 1. It has multi-function valve. So it`s instead of Safety & Reducing & Strainer. 2. Economical type. 3. Reduce the weight when it`s installed in the unit. 4. Make the pipe line shortly.
Specification
Dimensions (mm)Size
mm(inch) Rate L G H A WeightAbt(Kg)
15(1/2”) 30K 17882 150 1/2” 8
40K 182
20(3/4”) 30K 17882 150 1/2” 9
40K 182
25(1”) 30K 18282 150 1/2” 13
40K 186
32(1.1/4”) 30K 22596 185 3/4” 19
40K 229
40(1.1/2”) 30K 22596 185 3/4” 20
40K 229
50(2”) 30K 246115 205 3/4” 34
40K 254
Notes :1. Also available in JIS, DIN and ANSI. For all other standards please consult factory.
2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The fl anges shall conform by JIS B2220.
RS valve KPS-SR
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
22
KORVAL / www.korval.co.kr
When the over press occurred in the line by load change. This valve operate to keep the pressure in the line and/or protect the piping line from the damage and/or operate By-pass function to keep the primary pressure in the main line. It is external type, and an auxiliary power is not required and it can operate under high temperature / pressure an/or liquid of high viscosity.
KPP-CYThe operate part is balance type. So the influence of back pressure is small and it can control precision by sensitive acting.
KPP-PLThis is cylinder pilot type. So it can operate by small power. That’s why the size of alve is smaller than other type. It can use in this case.
Specification
Model KPP-CY KPP-PLType Cylinder Pilot
Applicable Fluids Water, Liquid, Oil
Applicable Press. / Temp. 16 kgf/㎠ / 150℃ 20 kgf/㎠ / 150℃
MaterialBody Ductile Cast Iron, Bronze, Cast Steel
Trim Stainless Steel
Size 15~100mm 125~200 mm
Accessories (Option) ● Glycerin port ● Pressure gauge unit
Dimensions (mm)
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory.
2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Primary Pressure Regulating Valve
Model Sizemm(inch) d L H1 H2 Weight
Abt(Kg)
KPP-CY
15(1/2”) 15 136 220 60 7
20(3/4”) 20 140 220 60 8
25(1”) 25 150 255 65 14
32(1.1/4”) 32 190 285 79 19
40(1.1/2”) 40 190 285 79 21
50(2”) 50 200 303 86 23
65(2.1/2”) 65 230 410 92 38
80(3”) 80 262 415 125 49
100(4”) 100 350 538 163 73
KPP-PL125(5”) 125 390 395 185 86
150(6”) 150 456 405 216 129
200(8”) 200 543 445 242 135
KPP-CY
KPP-PL
KPP-CY
Primary Pressure Regulating Valve
We will make it for customer impressed not customer satisfaction
23
KORVAL / www.korval.co.kr
Shut Off Valve
Primary Pressure Regulating Valve
Model KSF-VS K3B-VSType (Spring Return) Butterfly Ball (“T”)
Applicable Fluid Water, Oil
Applicable Press. / Temp. 7 kgf/㎠ / 80℃ 7 kgf/㎠ / 80℃
Air supply Pressure 2.5~4 kgf/㎠ 5~7 kgf/㎠
OperationAir Fail Closed / Opened A→B
Air Supply Opened / Closed A→C
MaterialBody Ductile Cast Iron, Bronze, Cast Steel
Trim SCS / EPDM SCS / TEFLON
Size 50~125mm 65~80mm
Accessories (Option) ● Solenoid valve ● Air set
Shut Off ValveDividing type and mixing type by flow direction of fluid in a system. Valve is operation by air pressure existence and nonexistence at actuator and as this acting, the main valve is operated open/close. It’s spring return Type and Various function is possible with accessories. No leakage and strongly.Emergency operating is possible with emergency handle devices. The actuator part is compact size and it’s available to use various fluid to move the actuator.
KSF-VSIt’s for Butterfly type liquid only. Installation & assembly is easy. and it is economical. Big capacity & minimum pressure drop.
K3B-VS3way ball(“T”) type valve. Dividing type and mixing type by flow direction of fluid of ystem. Valve is operation by air pressure existence an nonexistence and type is division by valve installed direction.
Specification
Dimensions (KSF-VS)
Dimensions (K3B-VS)
(mm)
(mm)
Sizemm(inch) d L D D1 D2 H1 H2 Weight
Abt(Kg)50(2”) 50 43 155 163 140 77 138 14
65(2.1/2”) 65 46 155 163 140 77 138 14
80(3”) 80 46 180 225 180 85 185 15
100(4”) 100 55 200 225 180 103 188 18
125(5”) 125 58 235 225 180 120 214 21
Sizemm(inch) d L G D H1 H2 Weight
Abt(Kg)65(2.1/2”) 65 262 131 210 236 133 38
80(3”) 80 262 131 210 236 133 55
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory.
2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
KSF-VS
K3B-VS
K3B-VS KSF-VS
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
24
KORVAL / www.korval.co.kr
Shut Off ValveThe valve is emergency check/supply to flow of fluid in the system.Main valve is open/close as the air pressure supply/check at actuator.It’s spring return type and it has various function with accessories.
● FEATURE 1. Simply construction and easy Installation. 2. No leakage and strongly. 3. Emergency operating is possible with emergency handle devices. 4. Valve has large capacity.
Specification
Model KCY-HA KCY-YKType Cylinder
Applicable Fluids Water, Steam, Oil
Applicable Press. / Temp. 5 kgf/㎠ / 160℃ 10 kgf/㎠ / 220℃
Air supply Pressure 5~7 kgf/㎠
Operation (Air fail) Closed Closed/Open
MaterialBody Ductile Cast Iron, Bronze
Trim Stainless Steel
Size 15~50mm 65~200 mm
Accessories (Option) ● Solenoid valve ● Limit switch ● Air set
Dimensions (mm)
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Shut Off Valve
Model Sizemm(inch) d L G H Weight
Abt(Kg)
KCY-HA
15(1/2”) 15 154 60 295 18
20(3/4”) 20 158 83 295 22
25(1”) 25 160 64 295 25
32(1.1/4”) 32 190 83 295 29
40(1.1/2”) 40 190 83 295 32
50(2”) 50 220 85 295 43
KCY-YK
65(2.1/2”) 65 290 158 830 47
80(3”) 80 310 190 862 62
100(4”) 100 350 218 960 70
125(5”) 125 390 224 994 86
150(6”) 150 451 273 1043 115
200(8”) 200 543 273 1043 135 KCY-HA KCY-YK
KCY-HA
We will make it for customer impressed not customer satisfaction
25
KORVAL / www.korval.co.kr
Shut Off Valve
Change Over Valve
Model KC3-ST, EB KC3-YKType (Spring Return) Cylinder (Straight, Elbow) Cylinder (Straight)
Applicable Fluid Water, Steam, Oil
Applicable Press. / Temp. 5 kgf/㎠ / 160℃ 10 kgf/㎠ / 220℃
Air supply Pressure 5~7 kgf/㎠
Operation Dividing Air supply (B→C) / Air less (B→A)
Mixing Air supply (C→B) / Air less (A→B)
MaterialBody Ductile Cast Iron, Bronze, Cast Steel
Trim Stainless Steel
Size 15~50mm 65~200 mm
Accessories (Option) ● Solenoid valve ● Limit switch ● Air set
Dimensions (mm)
Model Sizemm(inch) d L G1 G2 H Weight
Abt(Kg)
KC3-ST -EB
15(1/2”) 15 154 110 135 295 18
20(3/4”) 20 158 110 135 295 22
25(1”) 25 160 115 140 295 25
32(1.1/4”) 32 190 150 160 295 29
40(1.1/2”) 40 190 150 160 295 32
50(2”) 50 220 158 178 295 43
KC3-YK
65(2.1/2”) 65 290 202 - 830 47
80(3”) 80 310 213 - 862 62
100(4”) 100 350 234 - 960 70
125(5”) 125 390 260 - 994 86
150(6”) 150 451 296 - 1043 115
200(8”) 200 543 296 - 1043 135KC3-ST, EB KC3-YK
Change Over ValveDividing type and mixing type by flow direction of fluid in a system. Valve Which is spring return type is operation by air pressure existence ornonexistence at actuator. As this operating, The main valve will be operated“OPEN/CLOSE” and type is division by valve installed direction.
● FEATURE 1. Emergency operating is possible with emergency handle devices. 2. No leakage and strongly. 3. One valve has Two kind of ability. 4. Various function is possible with accessories Hydraulic.
Specification
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
KC3-ST
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
26
KORVAL / www.korval.co.kr
Hydraulic Rotary ActuatorThis is occurrence to fan shape movement of piston by external pressure it back into rotation movement of a multitude gear to high torque. It can use on ball, butterfly, plug valve. The size of actuator is small and “DOUBLE ACTING TYPE”.
● FEATURE 1. Compact and easy Installation. 2. It is no Damage of gear with internal balance type. 3. Having high torque. 4. Can be installed in both horizontal and vertical position. 5. Simply construction and strongly, it can keep sealing. 6. Emergency operating is possible with emergency handle devices.
Specification
Model KHRP75VD KHRPA0VD KHRPA4VD KHRPB0VD KHRPB5VD KHRPB8VDMax, torque at 210 Bar N.m 547 1319 6517 13805 33600 51625
Torque at 120 Bar N.m 313 754 3724 7889 19200 29500
Max. operation pressure Bar 120
Operating Pr. open/close Bar 90 / 80
Angle of rotation 90±5
Ambient temperature range ℃ -20 to +80
Approx. weight(without oil) kg 8 10 20 35 67 98
Viscosity of hydraulic oil Mineral oil, ISO VG 22~32
Accessories(Option) ● Check & By-pass valve ● Manual Override ● Limit switch
Dimensions (mm)
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory.
2. Weights (Cast Steel) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220. 4. All kind of type are available up on request.
Hydraulic Rotary Actuator
Sizemm(inch) d L D1 H1 H2 H3 M Oil Volume
(cc)Torque(90bar)(N.m)
WeightAbt(Kg)
15(1/2”) 143 100 105 260 95 203 250 135 235 45
20(3/4”) 190 100 140 300 95 241 250 320 568 65
25(1”) 242 110 140 300 95 273 250 320 568 80
32(1.1/4”) 290 110 187 330 110 300 250 1250 2802 107
40(1.1/2”) 329 120 187 330 110 320 250 1250 2802 136
50(2”) 382 130 187 330 110 353 250 1250 2802 159
65(2.1/2”) 471 160 187 330 140 415 290 1250 2802 245
80(3”) 570 170 280 442 162 485 375 2000 5920 365
100(4”) 676 180 280 442 180 545 380 2000 5920 485
125(5”) 768 200 280 442 180 615 380 2000 5920 643
150(6”) 865 230 335 532 270 691 400 3900 14390 955
200(8”) 962 250 335 532 270 744 400 3900 14390 1109
KHRP75VD
We will make it for customer impressed not customer satisfaction
27
KORVAL / www.korval.co.kr
Hydraulic Rotary Actuator
Hydraulic Transmitter
Butterfly Type Angle Type Globe Type
Hydraulic TransmitterThe pump of transmitter internal is operated with press at specify part on hydraulic force when handle right and lift operation. Korval valve is suitability at actuator operation and hydraulic transmitter remote control
● FEATURE 1. Installation simple and no auxiliary power is required 2. Handling is easy for occur of large capacity. 3. Suitability at difficult of access of people. 4. Leakage is no with check valve of high faculty. 5. This one has safety function by itself. So it can protect by itself.
SpecificationModel AHT-T1 AHT-T2 AHT-T3 AHT-T4
Discharge (cc/rev.) 13 26 42 64
Max. Operation pressure 120kgf/㎠
Open / Close pressure 90 / 80 kgf/㎠
Applicable Temperature -20~80℃
Viscosity to Hydraulic Oil Mineral Oil, ISO VG22~ 32
Oil Fill Capacity 1200 250 1350 1400
Approx. Weight(without oil) 32 35 45 50
Dimension
ΦD 315 355 355 450H 700H1 300LM 210eam 180
Accessories ● Self seal coupling ● Lamp Box ● Manifold
AHT-T1
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
28
KORVAL / www.korval.co.kr
3Way Transfer ValveDisc structure is at on angle 90degrees for fluid direction turn type.Flow of fluid is free to turnby handle lever. One valve do two kind of function.● FEATURE 1. Maintenance is easy for main trans 2. No leakage and pressure drop 3. No damage by fluid supply instrument for open/close proportion type 4. It’s balance type. So easy to transfer the direction. 5. Just one valve used on small space. 6. No leakage.
SpecificationModel KT3-RU
Type Rotary
Applicable Fluids Water, Oil
Applicable Press./Temp. 18 kgf/㎠ / 80℃
MaterialBody Ductile Cast Iron, Cast Steel
Trim Stainless Steel
Size 100~200 mm
3Way Transfer Valve /Backflow Preventer Valve
Dimensions (mm)Size
mm(inch) d L M H H1 H2 WeightAbt(Kg)
100(4”) 100 312 156 410 120 290 54
125(5”) 125 348 174 410 120 290 80
150(6”) 150 378 189 483 180 340 104
200(8”) 200 460 230 546 220 340 150
250(10”) 250 534 267 610 260 350 220
300(12”) 300 680 340 674 300 374 290
KT3-RU
Backflow Preventer ValveFUNCTIONThis valve is designed at no leakage type by valve operation for back flow prevent of system. Used on compressor equipment and no leakage. Soft seat used on.
Specification
Model KBP-GL KBP-ANType Globe Angle
Applicable Fluids Compressed Air
Applicable Press./Temp. 30 kgf/㎠ / 80℃
MaterialBody Cast Steel
Trim Stainless Steel
Rating(kgf/㎠ ) / Size(mm) JIS 30K / 40~50
Dimensions (mm)Size
mm(inch) d L H WeightAbt(Kg)
40(1.1/2”) 40 240 135 19
50(2”) 50 260 140 23
KBP-GL
We will make it for customer impressed not customer satisfaction
29
KORVAL / www.korval.co.kr
3Way Transfer Valve
Auto Air Vent & Trap / Steam Injector
Specification
Model KAV-FL KAT-FLType Ball Float
Applicable Fluids Water, Oil Compressed Air
Applicable Press./Temp. 16 kgf/㎠ / 150℃ 30 kgf/㎠ / 150℃
MaterialBody Ductile Cast Iron, Cast Steel Cast Steel
Trim Stainless Steel
Size 15~25 mm
Dimensions (mm)
Auto Air Vent & TrapKAV-FLBall float type for liquids automatically discharges the air accumulated in the pipes or pressure vessels to smooth the flow of liquid service.● FEATURE 1. No chattering and water-hammer 2. No leakage and precise operation 3. Small size of course high capacity discharge. 4. Suitability at high temperature and pressure. 5. Stability performance for float type
KAV-FLBall float type for liquids automatically discharges the condensation water in the gas system.● FEATURE 1. Stability performance for float type 2. No trim damage by pressure balance type 3. Suitability at high temperature and pressure. easy
installed .
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Model Sizemm(inch) D H G PT Weight
Abt(Kg)
KAV-FL15(1/2”) 15 128 128 125 13
20(3/4”) 20 130 130 125 15
25(1”) 25 130 130 125 18
KAF-FL15(1/2”) 15 226 125 120 13
20(3/4”) 20 230 125 120 14
25(1”) 25 230 125 120 15
KAV-FL KAT-FL
Steam InjectorSteam injector constantly heat whole temperature that it spout mixed low temperature liquid and steam.
● FEATURE 1. Heating coil and heating exchange is no needed. 2. Direct heating type and heat loss of small quantity. 3. Type of no corrosion and low noise
Dimensions (mm)SpecificationModel PSJ-BW(Fg/Sc)
Type Butter Welding(Flange/Screw)
Applicable Fluids Steam
Applicable Press./Temp. 16 kgf/㎠ / 220℃
Material Body Stainless Steel
Trim Stainless Steel
Size 15~50 mm
Sizemm(inch) d L H d2 Weight
Abt(Kg)15(1/2”) 15 220 140 21.7 2
20(3/4”) 20 220 140 27.2 3
25(1”) 25 340 130 34 4
32(1.1/4”) 32 315 180 42.7 5
40(1.1/2”) 40 315 180 48.6 7
50(2”) 50 355 213 60.5 8
PSJ-BW
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
30
KORVAL / www.korval.co.kr
Thermostatic Element / Vacuum Breaker
Dimensions (mm)Size
mm(inch) d1 d2 H H1 A B WeightAbt(Kg)
ALL 58.5 73 140 60.9 9.4 4 0.65
Thermostatic ElementIt is used for maintaining the proper temperature of the system, the system is installed on the internal temperature sensor that is working.
● FEATURE 1. Use a wide range of different temperatures. 2. Easy to install inside the sensor type and are made of. 3. Built-in relief did not break. 4. There is no corrosion.
SpecificationModel KTM-WA
Type Wax
Applicable Fluids Water, Lubricate Oil
Applicable Press./Temp. Max. 5 Bar /32~98℃
MaterialBody Stainless Cast Steel
Trim Stainless Steel
Size Φ58.5 x Φ73 x 140L
KTM-WA
Vacuum BreakerUse on due to vacuum occur of gas, liquid in system for damage of instrument, malfunction prevention, smoothly drain etc.
KVB-FG : Easy to control the pressure of vacuum and used soft disc for leakage zero.
PVB-SC : It can stand under water hammer, high pressure/temp because of ball type disc.
SpecificationModel KVB-FG PVB-SC
Type Spring Loading Ball
Applicable Fluids Air, Sea Water, Oil Air, Steam, Sea Water, Oil
Applicable Press./Temp. 10 kgf/㎠ / 150℃ 20 kgf/㎠ / 220℃
MaterialBody Stainless Steel, Brass
Trim Stainless Steel
Size 15~25 mm PT 1/2”
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Dimensions (mm)
Model Sizemm(inch) D H G PT Weight
Abt(Kg)
KVB-FG15(1/2”) 15 184 - - 3
20(3/4”) 20 184 - - 3
25(1”) 25 184 - - 4
PVB-SC 15(1/2”) - 56 24 1/2” 1
KVB-FG
PVB-SC
We will make it for customer impressed not customer satisfaction
31
KORVAL / www.korval.co.kr
Solenoid Valve /Shut Off Flap
Thermostatic Element
Dimensions (mm)Size
mm(inch) d L H H1 H2 W WeightAbt(Kg)
279.4(11”) 279.4 512 696 505 191 76.2 33
Model KSF-FPType Normal Open
Applicable Fluids Air, Gas
Applicable Press./Temp. Max. 4 Bar / Max. 232℃
MaterialBody Aluminum Alloy Casting
Trim Carbon Steel / Teflon
Leakage Ansi Class IV
Size 11 Iich(Φ279.4mm)
Control Air Pressure Min. 2.5 BAR
Control Air Connection M10 x P1.0, DP15mm
Accessories(Option) Limit Switch
Solenoid ValvePressure of the air supply is used for removing the residual pressure, the supply of electricity is only controlling the operation of the valve, mainly marine engine operation and emergency stop devices are used as auxiliary, and emergency stop for the purpose of the operation are identifi ed.
● FEATURE 1. Electricity supply is only capable of functioning. 2. The simple structure is easy to install. 3. Suitable for high pressure. 4. Small size and light weight.
Specification
Specification
Model KSD-3SType Starting, Emergency Stop
Applicable Fluids Compressar Air
Applicable Press./Temp. Min. 6~ Max. 40 Bar / -20~80℃
MaterialBody Aluminum
Trim Stainless steel / Aluminun
SupplyVoltage DV24V(±10%)
Protected Grade IP65
Size / End Connection 25A/ PF 1”SCREWED
Cable Gland PG9
Dimensions (mm)Size
mm(inch) L1 L2 L3 H H1 H2 H3 WeightAbt(Kg)
25(1”) 134.5 144.5 95 260 49 40 190 5
Shut Off FlapMainly in the exhaust line is installed, the system of sensors to detect harmful gases in the event of receiving a signal from the ability to block the fl ow of emergency is the only valve.● FEATURE 1. Work faster and less noise. 2. Passive devices have an emergency operation is possible. 3. Work only in an emergency air supply is possible. 4. It is easy to install in a confi ned space.
KSF-FP
marine engine operation and emergency stop devices are used as auxiliary,
Starting Emergency
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
32
KORVAL / www.korval.co.kr
Y-StrainerIt is prevent break down and a rase durability, cost reduction because it is filtering the foreign matter within screen inter valve. Generally used to high price valve, high price pump and important equipment.
● FEATURE 1. Pressure drop has little more than at fluid through area wild. 2. Suitability at high temperature and pressure. 3. Compact and easy installed. 4. Easy maintenance
Specification
Dimensions (mm)
Y-Strainer
KYS-YT(15~50)
KYS-YT(65~300)
KYS-HP
Model KYS-YT KYS-HPType “Y”
Applicable Fluids Air, Steam, Liquid
Applicable Press./Temp. 20 kgf/㎠ / 220℃ 40 kgf/㎠ / 220℃
Material Body Ductile Cast Iron, Bronze, Cast Steel Cast Steel
Trim Stainless Steel
Mesh(Screen) 20, 40, 60, 80, 100
Size 15~300 mm 15~50 mm
Model Sizemm(inch) d H G PTA Weight
Abt(Kg)
KYS-YT
15(1 15 126 90 - 2
20(3/4”) 20 130 90 - 3
25(1”) 25 150 105 - 4
32(1.1/4”) 32 165 105 - 5
40(1.1/2”) 40 180 120 - 7
50(2”) 50 200 145 - 8
65(2.1/2”) 65 260 185 PT 3/8” 11
80(3”) 80 290 215 PT 3/8” 10
100(4”) 100 350 270 PT 1/2” 25
125(5”) 125 410 325 PT 1/2” 37
150(6”) 150 460 350 PT 1/2” 54
200(8”) 200 542 420 PT 3/4” 75
250(10”) 250 680 525 PT 3/4” 130
300(12”) 300 848 792 PT 1” 220
KYS-HP
15(1/2”) 15 220 140 PT 3/8” 8
20(3/4”) 20 220 140 PT 3/8” 9
25(1”) 25 240 170 PT 3/8” 11
32(1.1/4”) 32 315 180 PT 3/8” 15
40(1.1/2”) 40 315 180 PT 3/8” 16
50(2”) 50 355 213 PT 3/8” 18
KYS-YT
We will make it for customer impressed not customer satisfaction
33
KORVAL / www.korval.co.kr
Y-Strainer
PST-FG
PST-BP
PST-SC
PST-FGPST-BP PST-SC
Steam TrapISteam Trap is thermodynamics operating type that it operated intermittently difference temperature between steam andcondensation water.
● FEATURE 1. Construction simple and malfunction less. 4. Installed is continuously for both bypass valve. (PST-BP) 2. Suitability at water hammer. 5. Suitability at high temperature and pressure. 3. These models are suitably for stream racing. (PST-SC)
SpecificationModel PST-FG PST-BP PST-SC
Type Disc By-Pass Disc
Applicable Fluids Sat. Steam
Applicable Press./Temp. Max. 16 kgf/㎠ / 220℃ Max. 30 kgf/㎠ / 400℃
Material Body Ductile Cast iron, Bronze, Cast Steel SUS410
Trim Stainless Steel
Size 15~40 mm 15~25 mm 8~10 mm
Dimensions (mm)
Model Sizemm(inch) d L G H1 H2 PTA Weight
Abt(Kg)
PST-FG
15(1/2”) 15 136 63 - - - 3
20(3/4”) 20 140 63 - - - 6
25(1”) 25 150 65 - - - 4
32(1.1/4”) 32 190 75 - - - 6
40(1.1/2”) 40 190 75 - - - 8
PST-BP15(1/2”) 15 136 - 130 150 - 4
20(3/4”) 20 140 - 130 150 - 6
25(1”) 25 150 - 130 150 - 8
PST-SC 8(1/4”) - 50 - 24 40 PT 1/4” 0.5
10(3/8”) - 50 - 24 40 PT 1/4” 0.5
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights(Ductile Cast Iron) are approximate and applied JIS 10K. 3. The flanges shall conform by JIS B2220.
Steam Trap
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
34
KORVAL / www.korval.co.kr
Backflow Preventr Valve
Backflow Preventer ValveFlow of the fluid flow in the system at block prevents the backflow of fluid, RELIEF Built-in constant pressure differential valve with is the ability to attract survives.● FEATURE 1. It is structurally stable and smooth operation. 2. Changes in differential pressure is balanced structure. 3. 2 DISC structure of the backflow of fluid leaks and is
completely blocked. 4. DIAPHRAGM SENSING is sensitive to.
Specification
Model KBP-CKType Double Check
Applicable Fluids Water, Liquid
Applicable Press./Temp. Max. 10 Bar / -20~80℃
MaterialBody Cast Steel, Ductile Cast Iron, Bronze, Stainless Steel
Trim Stainless Steel
Pressure Drop 0.35 Bar
Size 15~50A
Dimensions (mm)Size
mm(inch) A L D H H1 H2 G WeightAbt(Kg)
15(1/2”) 15 166 126 78 145 82 305 15
20(3/4”) 20 170 130 78 145 82 305 18
25(1”) 25 170 150 78 145 120 343 23
32(1.1/4”) 32 192 166 92 154 120 366 30
40(1.1/2”) 40 192 180 92 154 140 366 35
50(2”) 50 210 200 98 162 140 380 42
Notes : 1. Also available in JIS, DIN and ANSI. For all other standards please consult factory. 2. Weights (Cast Steel)are approximate and applied JIS 10K. 3. The flanges shall conform to nominal pressure 10K of JIS B2220.
KBP-CK
Test
We will make it for customer impressed not customer satisfaction
35
KORVAL / www.korval.co.kr
Solenoid Valve
Solenoid ValveKSD-22Blocking the fl ow of fl uids and supplies, as only the valve according to the presence of electrical signals supplied to the fl uid supply system and is blocked.
● FEATURE 1. Electricity supply is only capable of functioning. 2. A simple structure and easy installation. 3. Screwed to assemble and light weight. 4. Suitable for high pressure and is high.
KSD-32And blocking the fl ow direction and a valve to supply an electrical signal depending on the supply of a fl uid or residual pressure within the system survives removal is a function with the valve.
● FEATURE 1. Electricity supply is only capable of functioning. 2. The simple structure is easy to install. 3. Suitable for high pressure.
Specification
Model KSD-22 KSD-32Type 2/2WAY, NORMAL CLOSED 3/2WAY, NORMAL CLOSED
Applicable Fluids Compressor Air
Applicable Press. / Temp. Max. 40 Bar / -20~80℃
MaterialBody Bronze
Trim Stainless Steel
Nominal Voltage DV24V(+5~10%)
Protected Grade IP65 IP43
Size / End Connection 25A / PF 1-1/2” SCREWED 3/8” / PT 3/8” SCREWED
Operating Power Less(Closed), PowerSupply(Poned) Power Less(1→2), PowerSupply(2→3)
Cable Gland PG9
Dimensions (KSD-32) (mm)Size
mm(inch) d L G D H1 H2 WeightAbt(Kg)
65(2.1/2”) 65 262 131 210 236 133 6.5
Dimensions (KSD-22) (mm)Size
mm(inch) d L L1 L2 L3 D WeightAbt(Kg)
25(1”) 25 241 26 91 90 70 8
KSD-22
KSD-22
KSD-32
KSD-32
Backflow Preventer Valve
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
36
KORVAL / www.korval.co.kr
E/P CONTROLLER (E&P-01, 02)
E/P Controller (E&P-01, 02)E&P-02 Controller, digital type electro-pneumatic controller is designed to control Process variables such as pressure, temperature, liquid level and so on.It provides All the latest digital electronic control functions with reliability & precision of a pneumatic Controller.Controller is composed of several major parts including Digital Signal Processor, flash ROM for program/datastorage, analog-digital signal filter, WatchDog circuits, RS232/485 Communication interface & a pair of solenoidvalves and etc..The algorithm for PID control & auto-tuning was adopted as control software.Electro-Pneumatic Controller operates that It accepts the signals standard 4~20mA and/or Pt100 from a sensor(transmitter), and CPU forward output signal,To be calculated by PID. It’ll provide Pneumatic output to operate diaphragm or piston actuated control valves.Because this feature E&P-02 doesn’t use I/P transducer and/or valve Positioner, it operates actuator directlythus reducing the costs.
● FEATURE ● Micom controller that apply the newest technology. ● It is FND Display type which is easy to check and good for temperature character. ● P, PI, PID, Auto-Turing faculty. ● Supply to insert direct current 24voltage for Transmitter. ● Display process Progress Value(PV), Setting Value(SV), Deviation Value(DEV), Min /Max, Unit etc. ● Built in remote monitoring faculty. ● Simple design and economic. ● Various input to RTC, Transmitter, Thermocouple. ● Quality guaranteed to achieved CE_EMC
Specification
Model E&P-01 E&P-02Supply Voltage 110/220VAC,50/60Hz,24V DC 110/220VAC,50/60Hz,24V DC
Operating Voltage Range 90~110% of Rated Voltage 90~110% of Rated Voltage
Power Consumption 10W(MAX.) 6W(Steady State) 10W(MAX.) 6W(Steady State)
Input Signal 4~20mA,PT100ohm,K,(1~5V) 4~20mA,PT100ohm,K,(1~5V)
Output Signal DC4~20mA AIR1.4~2.4K
Control Action DIRECT or REVERSE DIRECT or REVERSE
Accuracy +/-0.3% of Full Span +/-0.3% of Full Span
Control Functions PID Control Functions, Auto-Tuning PID Control Functions, Auto-Tuning
Alarm Output Relay Contact Output(A) Relay Contact Output(A)
Error LED Lamp Error LED Lamp
Local Set Point Adjustment UP/DOWN Push Button UP/DOWN Push Button
Display LED,FND Display LED,FND Display
Adjustable Parameters SV,PV,PID,Unit SV,PV,PID,Unit
Self-Diagnostic Watch-Dog Circuit Watch-Dog Circuit
Communication(Optional) RS232 or RS485(Option) RS232 or RS485(Option)
E&P-01 E&P-02
We will make it for customer impressed not customer satisfaction
37
KORVAL / www.korval.co.kr
Accessories
Accessories
CONTROLLER
Level controller
Nominal Pressure Max. 25bar up to 250℃
Operating Temperature 1 to 220℃
Ambient Temperature 1 to 80℃
Density of Liquid Min 0.7kg/d㎥
Control Connections G1/8”(BSPP) inside thread
Supply Pressure 1.4 bar
Output Signal 0.2 to 1.0 bar
Linearity ±5%(of full scale output)
Protection grade IP54
Control Action P (proportional)
SLC-DT
SPC-KMC83P
STC-KMC83R11
Pressure controller
Supply pressure 1.4 ~ 4.0
Output pressure □0.2~1.0 □0.4~2.0
Measuring pressure □0~10 □0~16 □0~20
Protection grade IP54
Control action □P.I □P.I.D
kgf/㎠
kgf/㎠
kgf/㎠
Level controller
Supply pressure 1.4 ~ 4.0
Output pressure □0.2~1.0 □0.4~2.0
Temperature range □0~100 □0~150
Capillary tube length □5m □7m □10m
Protection grade IP54
Connection(sensor pocket) □PT 1/2 □PT 3/4”
Control action □P.I □P.I.D
kgf/㎠
kgf/㎠
℃
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
38
KORVAL / www.korval.co.kr
Accessories
Pneumatic-Pneumatic Positioner
Pneumatic-Pneumatic Positioner
Electro-Pneumatic Positioner
Electro-Pneumatic Positioner
Operation type Linear
Input signal 0.2~1.0 / 0.4~2.0
Supply pressure 1.4~7.0 kgf/㎠
Air connection PT 1/4”
Protection grade IP66
Ambient temp. -30℃~85℃
Material Aluminum diecasting
Model No. SPN-YT1200L
Operation type Linear/Rotary, S/Hart
Input signal 0.2~1.0 / 0.4~2.0
Supply pressure 1.4~7.0 kgf/㎠
Air connection PT 1/4”
Protection grade IP66
Ambient temp. -30℃~85℃
Material Aluminum diecasting
Model No. SPN-YT3300L/R
Operation type Linear
Input signal 4~20mA
Supply pressure 1.4~7.0 kgf/㎠
Air connection PT 1/4”
Protection grade IP66
Ambient temp. -30℃~85℃
Material Aluminum diecasting
Model No. SPN-YT1000L
Operation type Rotary
Input signal 4~20mA
Supply pressure 1.4~7.0 kgf/㎠
Air connection PT 1/4”
Protection grade IP66
Ambient temp. -30℃~85℃
Material Aluminum diecasting
Model No. SPN-YT1000R
Accessories
POSITIONER
kgf/㎠
kgf/㎠
We will make it for customer impressed not customer satisfaction
39
KORVAL / www.korval.co.kr
Accessories
SRT-PT100SD
Accessories
Air filter regulator
P/I(pressure to current) transducer
P/I(pressure to current) transducer
Temperature sensor
Applicable fluid Air
Max. supply pressure 15
Max. output pressure □4.2 □8.4
Air connection PT 1/4”
Material Aluminum diecasting
Input signal 4~20mA
Output signal 0.2~1.0kgf/㎠
Air consumption 0.05㎥/hr
Supply pressure 7kgf/㎠
Temperature limits -30℃ ~ 65℃
Cable gland 22GA. 3 wire leads
Connection 1/4-20 NPT
Protection grade IP65
Supply voltage DC24V(12~32V)
Signal pressure 0.2~1.0kgf/㎠
Output signal 4~20mA
Operating temperature range -40℃ ~ 125℃
Cable gland PG11.5(cable:Φ6.8~11.5)
Connection PT 1/4”
Protection grade IP65
Temperature range -60~200℃
Protection grade IP 54
Cable gland □15a □20a
Connection PT 1/2”
ThermowellMax. working temperature 220℃
Max. working pressure 70kgf/㎠
Connection □PT 1/2 □PT 3/4”
SAF-YT200A
SRT-PT100SD
SRT-PT100SD
kgf/㎠
kgf/㎠
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
40
KORVAL / www.korval.co.kr
Business Partners
Business Partners
Domestic Market HYUNDAE HEAVY INDUSTRY
HYUNDAE SAMHO HEAVY INDUSTRY
SAMSUNG HEAVY INDUSTRY
DOOSAN HEAVEY INDUSTRY
HANJIN HEAVY INDUSTRY
DAEWOO SHIPBUILDING & MARINE ENGINEERING (DSME)
HYUNDAE MIPO SHIPBUILDING
STX MARINE & SHIPBUILDING
SLS SHIPBUILDING
SPP MARINE & SHIPBUILDING
SUNGDONG SHIPBUILDING & MARINE
SAMHO SHIPBUILDING
DAEHAN SHIPBUILDING
SEGWANG HEAVY INDUSTRY
STX ENPACO
STX ENGINE
DOOSAN ENGINE
HYUNDAE ENGINE
S-Oil
SAMSUNG TECHWIN
GS E&C
We will make it for customer impressed not customer satisfaction
41
KORVAL / www.korval.co.kr
Business Partners
Overseas Market SHANGHAI WAIGAOQIAO SHIPYARD
ZHOUSHAN SHIPYARD
SHANHIGUAN SHIPYARD
JLZLING SHIPYARD
PT PAL SHIPYARD
MITSUBISHI KAKOKI KAISHA LTD
BOHAI SHIPBUILDING HEAVY INDUSTRY
CHENGXI SHIPYARD
WHENCHEONG SHIPYARD
ZHEJIANG SHIPBUILDING
HUDONG-ZHONGHUA SHIPBUILDING
SAINTY SHIPYARD
YANGFAN SHIPYARD
SHANGHAI SHIPYARD
CHINA SHIPPING INDUSTRY
GUANGZHOU SHIPYARD
GUANGZHOU WENCHONG SHIPYARD
GIANGSU RONGSHENG SHIPYARD
STX DALIAN SHIPBUILDING
SAMJIN SHIPBUILDING INDUSTRIES(SSI)
MITSUBISHI HEAVY INDUSTRY
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
KORVAL / www.korval.co.kr
We will make it for customer impressed not customer satisfaction Automatic & Control Valve
KORVAL / www.korval.co.kr
Global Network
Global Network
HeadquarterKorea - Busan TEL : +82-51-790-9700 FAX : +82-51-790-9799
Network for Global ServiceSingapore - Singapore TEL : +65-6225-6797 FAX : +65-6225-2294
China - Shanghai TEL : +86-21-5818-6628 FAX : +86-21-5818-6633 Shanghai TEL : +86-21-6818-3183 FAX : +86-21-6818-3115 Shanghai TEL : +86-411-8282-0885 FAX : +86-411-8265-6979 GuangZhou TEL : +86-20-3766-0380 FAX : +86-20-3766-0379 Dalian TEL : +86-411-8282-0885 FAX : +86-411-8265-6979 Weihai TEL : +86-22-6868-6949 FAX : +86-22-6868-6945
Hong Kong - Hong Kong TEL : +86-21-5818-6628 FAX : +86-21-5818-6633
Japan - Kobe TEL : +81-78-392-3115 FAX : +81-78-392-3160
Indonesia - Jakarta TEL : +62-0-21-6408091 FAX : +62-0-21-6401150
Vietnam - Vung Tau TEL : +84-64-3-616272 FAX : +84-64-3-616270 India - Mumbai TEL : +91-22-6-6755888 FAX : +91-22-6-6755890 Mumbai TEL : +91-22-6630-3909 FAX : +91-22-6630-3911
We will make it for customer impressed not customer satisfaction KO
RVAL / www.korval.co.kr
Global Network
Network for Global ServiceU.A.E - Dubai TEL : +971-4-3977231 FAX : +971-4-3961588Saudi Arabia - Jeddah TEL : +966-2-290-7205 FAX : +966-2-288-0483 Bahrain - Hidd TEL : +973-1-767-2135 FAX : +973-1-746-6145 Netherlands - Rotterdam TEL : +31-180-597-033 FAX : +31-180-466-780Germany - Hamburg TEL : +49-(0)40-8195-2898 FAX : +49-(0)40-8195-2967U.K. - Greenock TEL : +44-0-1475-744655 FAX : +44-0-1475-744666 Greece - Piraeus TEL : +30-0-210-4082080 FAX : +30-0-210-4082084 Norway - Oslo TEL : +47-0-22-883930 FAX : +47-0-22-883931 Turkey - Istanbul TEL : +90-216-49425-48 FAX : +90-216-494-2533 Belgium - Antwerp TEL : +32-(0)485-51-07-30USA - New York TEL : +1-718-855-7200 FAX : +1-718-802-1147 - Houston TEL : +1-281-441-4642 FAX : +1-281-441-7687HoBrazil - Santos, SP TEL : +55-13-3226-4686 FAX : +55-13-3226-4680 Malaysia - Selangor TEL : +6(03) 58804790 FAX : +6(03) 58804695