Kinematics Dynamics
-
Upload
zhuang-sheng-tam -
Category
Documents
-
view
113 -
download
4
description
Transcript of Kinematics Dynamics
![Page 1: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/1.jpg)
Basic Kinematics and Dynamics
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
Fluid Mechanics: Fundamentals and Applications2nd EDITION IN SI UNITS
Yunus A. Cengel, John M. CimbalaMcGraw-Hill, 2010
![Page 2: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/2.jpg)
2
The fundamental differential equations of fluid motion are derived in this chapter, and we show how to solve them analytically for some simple flows. More complicated flows, such as the air flow induced by a tornado shown here, cannot be solved exactly.
![Page 3: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/3.jpg)
3
Objectives• Understand how the differential equation of
conservation of mass and the differential linear momentum equation are derived and applied
• Calculate the stream function and pressure field, and plot streamlines for a known velocity field
• Obtain analytical solutions of the equations of motion for simple flow fields
![Page 4: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/4.jpg)
4
1 ■ INTRODUCTION
(a) In control volume analysis, the interior of the control volume is treated like a black box, but (b) in differential analysis, all the details of
the flow are solved at every pointwithin the flow domain.
The control volume technique is useful when we are interested in the overall features of a flow, such as mass flow rate into and out of the control volume or net forces applied to bodies.
Differential analysis, on the other hand, involves application of differential equations of fluid motion to any and every point in the flow field over a region called the flow domain.
Boundary conditions for the variables must be specified at all boundaries of the flow domain, including inlets, outlets, and walls.
If the flow is unsteady, we must march our solution along in time as the flow field changes.
![Page 5: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/5.jpg)
5
2 ■ CONSERVATION OF MASS—THE CONTINUITY EQUATION
To derive a differential conservation equation, we imagine shrinking a control
volume to infinitesimal size.
The net rate of change of mass within the control volume is equal to the rate at which mass flows into the control volume minus the rate at which mass flows out of the control volume. Continuity equation is the differential equation form of conservation of mass.
EQ 1
EQ 2
![Page 6: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/6.jpg)
6
Derivation Using the Divergence Theorem
The quickest and most straightforward way to derive the differential form of conservation of mass is to apply the divergence theorem (Gauss’s theorem).
This equation is the compressible form of the continuity equation since we have not assumed incompressible flow. It is valid at any point in the flow domain.
Let G = ρ V, Substitute div theorem in to EQ 1,
EQ 3
![Page 7: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/7.jpg)
7
Derivation Using an Infinitesimal Control Volume
A small box-shaped control volume centered at point P is used for derivation of the differential equation for conservation of mass in Cartesian coordinates; the pink dots indicate the center of each face.
At locations away from the center of the box, we use a Taylor series expansion about the center of the box.
![Page 8: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/8.jpg)
8
The mass flow rate through a surface is equal to VnA.
The inflow or outflow of mass through each face of the differential
control volume; the pink dots indicate the center of each face.
EQ 4
EQ 5
![Page 9: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/9.jpg)
9
By using the divergence operation on the EQ 7, EQ 3 can be obtained.
EQ 6Replacing Eqs 4, 5 and 6 into Eq 2, produces:
EQ 7
![Page 10: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/10.jpg)
10
Fuel and air being compressed by a piston in a cylinder of an internal combustion engine.
![Page 11: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/11.jpg)
11
Nondimensional density as a function of nondimensional time for Example 9–1.
![Page 12: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/12.jpg)
12
Alternative Form of the Continuity Equation
As a material element moves through a flow field, its density
changes according to EQ 8.
EQ 8
![Page 13: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/13.jpg)
13
Continuity Equation in Cylindrical Coordinates
Velocity components and unit vectors in cylindrical coordinates: (a) two-dimensional flow in the xy- or r-plane, (b) three-dimensional flow.
EQ 9
![Page 14: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/14.jpg)
14
Special Cases of the Continuity Equation
Special Case 1: Steady Compressible Flow
![Page 15: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/15.jpg)
15
Special Case 2: Incompressible Flow
The disturbance from an explosion is not felt until the shock wave reaches the observer.
![Page 16: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/16.jpg)
16
Converging duct, designed for a high-speed wind tunnel (not to scale).
![Page 17: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/17.jpg)
17
![Page 18: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/18.jpg)
18
Streamlines for the converging duct of
Example 9–2.
![Page 19: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/19.jpg)
19
![Page 20: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/20.jpg)
20
The continuity equation can be used to find a missing velocity component.
![Page 21: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/21.jpg)
21
![Page 22: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/22.jpg)
22Streamlines and velocity profiles for (a) a line vortex flow and (b) a spiraling line vortex/sink flow.
![Page 23: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/23.jpg)
23
![Page 24: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/24.jpg)
24
(a) In an incompressible flow field, fluid elements may translate, distort, and rotate, but they do not grow or shrink in volume; (b) in a compressible flow field, fluid elements may grow or shrink in volume as they translate, distort, and rotate.
Discussion The final result is general—not limited to Cartesian coordinates. It applies to unsteady as well as steady flows.
![Page 25: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/25.jpg)
25
![Page 26: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/26.jpg)
26
3 ■ THE STREAM FUNCTION
The Stream Function in Cartesian Coordinates
Incompressible, two-dimensional stream function in Cartesian coordinates:
stream function
There are several definitions of the stream function, depending on the type of flow under
consideration as well as the coordinate system being used.
Incompressible 2-D ContinuityEquation
Putting in the partial differential of u and vIn terms of into incompressible continuity equation, results as below:
![Page 27: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/27.jpg)
27
Curves of constant stream function represent streamlines of the flow.
Curves of constant are streamlines of the flow.
![Page 28: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/28.jpg)
28
![Page 29: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/29.jpg)
29
Streamlines for the velocity field of Example 9–8; the value of constant is indicated for each streamline, and velocity vectors are shown at four locations.
![Page 30: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/30.jpg)
30
![Page 31: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/31.jpg)
31
![Page 32: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/32.jpg)
32
Streamlines for the velocity field of Example 9–9; the value of constant is indicated for each streamline.
![Page 33: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/33.jpg)
33
The difference in the value of from one streamline to another is equal to the volume flow rate per unit width between the two streamlines.
(a) Control volume bounded by streamlines 1 and 2 and slices A and B in the xy-plane; (b) magnified view of the region around infinitesimal length ds.
![Page 34: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/34.jpg)
n = dy/ds i – dx/ds j
Volume flow rate through segment ds:
dV = V . n dA = (ui + vj) . (dy/ds i– dx/ds j) ds
Where dA = ds x 1
dV = u dy –v dx = d
VB = 2 - 1
.
![Page 35: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/35.jpg)
35
The value of increases to the left of the direction of flow in the xy-plane.
Illustration of the “left-side convention.” In the xy-plane, the value of the stream function always increases to the left of the flow direction.
In the figure, the stream function increases to the left of the flow direction, regardless of how much the flow twists and turns.
When the streamlines are far apart (lower right of figure), the magnitude of velocity (the fluid speed) in that vicinity is small relative to the speed in locations where the streamlines are close together (middle region).
This is because as the streamlines converge, the cross-sectional area between them decreases, and the velocity must increase to maintain the flow rate between the streamlines.
![Page 36: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/36.jpg)
36
![Page 37: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/37.jpg)
37
Streaklines produced by Hele–Shaw flow over an inclined plate. The streaklines model streamlines of potential flow (Chap. 10) over a two-dimensional inclined plate of the same cross-sectional shape.
![Page 38: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/38.jpg)
38
Streamlines for free-stream flow along a wall with a narrow suction slot; streamline values are shown in units of m2/s; the thick streamline is the dividing streamline. The direction of the velocity vector at point A is determined by the left-side convention.
![Page 39: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/39.jpg)
39
![Page 40: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/40.jpg)
40
The Stream Function in Cylindrical Coordinates
Flow over an axisymmetric body in cylindrical coordinates with rotational symmetry about the z-axis; neither the geometry nor the velocity field depend on , and u = 0.
![Page 41: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/41.jpg)
41
Streamlines for the velocity field of Example 9–12, with K = 10 m2/s and C = 0; the value of constant is indicated for several streamlines.
![Page 42: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/42.jpg)
42-
![Page 43: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/43.jpg)
43
4- Motion and Deformation of Fluid Element
![Page 44: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/44.jpg)
Velocity and Acceleration Field
![Page 45: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/45.jpg)
![Page 46: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/46.jpg)
Example.
The velocity of a flow field is given by:
V = xi + x2zj + yzk
Find expression for three components of acceleration.
![Page 47: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/47.jpg)
![Page 48: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/48.jpg)
48
Angular Motion and Deformation
The angular velocity of OA can be described as :
![Page 49: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/49.jpg)
49
For positive dv/dx, ωOA is counterclockwise. The angular velocity of OB is:
![Page 50: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/50.jpg)
50
![Page 51: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/51.jpg)
51
The fluid element will rotate about the z axis undeformed only when:
Otherwise, rotation will cause angular deformation. The rotation around z axis is zero when ωOA = ωOB . When the following condition is achieved,
the rotation and vorticity is zero, and the flow field is called irrotational
![Page 52: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/52.jpg)
52
Example : determine if the flow is irrotational
![Page 53: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/53.jpg)
![Page 54: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/54.jpg)
54
5 ■ THE DIFFERENTIAL LINEAR MOMENTUM EQUATION—CAUCHY’S EQUATION
General expression for linear momentum equation on a control volume is:
For a special case of flow with well defined outlets and inlets, the equation above can be simplified as follows:
Β is the momentum flux correction factor and V is the average velocity at inlet or outlet.
EQ 10
EQ 11
![Page 55: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/55.jpg)
55
Positive direction of the stress is the positive coordinate direction on the surfaces for which the outward normal is in the positive direction. Positive normal stress are tensile stress, they tend to stretch the material.
Positive components of the stress tensor in Cartesian coordinates on the positive (right, top, and front) faces of an infinitesimal rectangular control volume. The pink dots indicate the center of each face. Positive components on the negative (left, bottom, and back) faces are in the opposite direction of those shown here.
![Page 56: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/56.jpg)
56
Derivation Using the Divergence Theorem
An extended form of the divergence theorem is useful not only for vectors, but also for tensors. In the equation, Gij is a second-order tensor, V is a volume, and A is the surface area that encloses and defines the volume.
Cauchy’s equation is a differential form of the linear momentum equation. It applies to any type of fluid.
Applying Extended Divergence Theorem to Eq 10 above, to the last term and second term on left hand side produces the following two equations:
Putting the two equations into Eq10, and rearranging produces:
Equating the integrand to zero producesCauchy’s Equation below.
![Page 57: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/57.jpg)
57
Derivation Using an Infinitesimal Control Volume
Inflow and outflow of the x-component of linear momentum through each face of an infinitesimal control volume using first order Taylor series approximation. The pink dots indicate the center of each face.
EQ 12
![Page 58: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/58.jpg)
58
The gravity vector is not necessarily aligned with any particular axis, in general, and there are three components of the body force acting on an infinitesimal fluid element.
By summing up the outflows and subtracting inflows, we get the approximation of the last two terms of Eq 11 as follows:
The gravity force is the only body force, and the gravity vector can be written as:
Body force in x direction can be written as:
EQ 13
EQ 14
![Page 59: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/59.jpg)
59
Sketch illustrating the surface forces acting in the x-direction due to the appropriate stress tensor component on each face of the differential control volume; the pink dots indicate the center of each face.
EQ 15
Replacing Eqs 12, 13, 14 and 15 into Eq 11 and rearranging, results in:
![Page 60: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/60.jpg)
60
![Page 61: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/61.jpg)
61
Alternative Form of Cauchy’s Equation
Expanding the first term in Cauchy’s Eq :
The second term can be written as :
Replacing these two terms and rearranging:
The terms in square bracket is zero from continuity equation, so the above can be rearranged as follows:
![Page 62: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/62.jpg)
62
Derivation Using Newton’s Second Law
If the differential fluid element is a material
element, it moves with the flow and Newton’s second
law applies directly.
Replacing the expressions for body andSurface forces Eq 14 and Eq 15, into theabove results in:
![Page 63: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/63.jpg)
63
6 ■ THE NAVIER–STOKES EQUATION
Introduction
For fluids at rest, the only stress on a fluid element is the hydrostatic pressure, which always acts inward and normal to any surface.
ij, called the viscous stress tensor or the deviatoric stress tensor
For incompressible flow, P in eq. above is Mechanical pressure which is the mean normal stress acting inwardly on a fluid element.
![Page 64: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/64.jpg)
64
Newtonian versus Non-Newtonian Fluids
Rheological behavior of fluids—shear stress as a function of shear strain rate.
Rheology: The study of the deformation of flowing fluids.
Newtonian fluids: Fluids for which the shear stress is linearly proportional to the shear strain rate.
Non-Newtonian fluids: Fluids for which the shear stress is not linearly related to the shear strain rate.
Viscoelastic: A fluid that returns (either fully or partially) to its original shape after the applied stress is released.
Some non-Newtonian fluids are called shear thinning fluids or pseudoplastic fluids, because the more the fluid is sheared, the less viscous it becomes.
Plastic fluids are those in which the shear thinning effect is extreme.
In some fluids a finite stress called the yield stress is required before the fluid begins to flow at all; such fluids are called Bingham plastic fluids.
![Page 65: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/65.jpg)
65
Shear thickening fluids or dilatant fluids: The more the fluid is sheared, the more viscous it becomes.
When an engineer falls into quicksand (a dilatant fluid), the faster he tries to move, the more viscous the fluid becomes.
![Page 66: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/66.jpg)
66
Derivation of the Navier–Stokes Equation for Incompressible, Isothermal Flow
The incompressible flow approximation implies constant density, and the isothermal approximation implies constantviscosity.
![Page 67: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/67.jpg)
67
The Laplacian operator, shown here in both Cartesian and cylindrical coordinates, appears in the viscous term of the incompressible Navier–Stokes equation.
Substituting this tensor into x component of Cauchy equation produces equation below.
![Page 68: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/68.jpg)
68
The Navier–Stokes equation is an unsteady, nonlinear, secondorder, partial differential equation.
Equation 9–60 has four unknowns (three velocity components and pressure), yet it represents only three equations (three components since it is a vector equation).
The incompressible continuity equation (Eq. 9–16) is needed to solve this problem.
The term in parentheses is zero, and using the Laplacian operator, the equation above can be written as follows:
![Page 69: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/69.jpg)
69
Continuity and Navier–Stokes Equations in Cartesian Coordinates
![Page 70: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/70.jpg)
70
Continuity and Navier–Stokes Equations in Cylindrical Coordinates
![Page 71: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/71.jpg)
71
An alternative form for the first two viscous terms in the r- and -components of the Navier–Stokes equation.
The viscous stress tensorIn cylindrical coordinate
![Page 72: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/72.jpg)
72
7■ DIFFERENTIAL ANALYSIS OF FLUID FLOW PROBLEMSThere are two types of problems for which the differential equations (continuity and Navier–Stokes) are useful:
• Calculating the pressure field for a known velocity field
• Calculating both the velocity and pressure fields for a flow of known geometry and known boundary conditions
A general three-dimensional but incompressible flow field with constant properties requires four equations to solve for four unknowns.
![Page 73: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/73.jpg)
73
Calculation of the Pressure Field for a Known Velocity Field
The first set of examples involves calculation of the pressure field for a known velocity field.
Since pressure does not appear in the continuity equation, we can theoretically generate a velocity field based solely on conservation of mass.
However, since velocity appears in both the continuity equation and the Navier–Stokes equation, these two equations are coupled.
In addition, pressure appears in all three components of the Navier–Stokes equation, and thus the velocity and pressure fields are also coupled.
This intimate coupling between velocity and pressure enables us to calculate the pressure field for a known velocity field.
![Page 74: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/74.jpg)
74
![Page 75: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/75.jpg)
75
![Page 76: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/76.jpg)
76
For a two-dimensional flow field in the xy-plane, cross-differentiation reveals whether pressure P is a smooth function.
![Page 77: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/77.jpg)
77
![Page 78: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/78.jpg)
78
The velocity field in an incompressible flow is not affected by the absolute magnitude of pressure, but only by pressure differences.
Since pressure appears only as a gradient in the incompressible Navier–Stokes equation, the absolute magnitude of pressure is not relevant—only pressure differences matter.
Filled pressure contour plot, velocity vector plot, and streamlines for downward flow of air through a channel with blockage: (a) case 1;
(b) case 2—identical to case 1, except P is everywhere increased by 500 Pa. On the
gray-scale contour plots, dark is low pressure and light is high pressure.
![Page 79: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/79.jpg)
79
![Page 80: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/80.jpg)
80
Streamlines and velocity profiles for
a line vortex.
![Page 81: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/81.jpg)
81
![Page 82: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/82.jpg)
82
For a two-dimensional flow field in the r-plane, cross-differentiation reveals whether pressure P is a smooth function.
![Page 83: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/83.jpg)
83
![Page 84: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/84.jpg)
84
The two-dimensional line vortex is a simple approximation of a tornado; the lowest pressure is at the center of the vortex.
![Page 85: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/85.jpg)
85
Exact Solutions of the Continuity and Navier–Stokes Equations
Procedure for solving the incompressible continuity and Navier–Stokes equations.
Boundary Conditions
A piston moving at speed VP in a cylinder. A thin film of oil is sheared between the piston and the cylinder; a magnified view of the oil film is shown. The no-slip boundary condition requires that the velocity of fluid adjacent to a wall equal that of the wall.
![Page 86: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/86.jpg)
86
At an interface between two fluids, the velocity of the two fluids must be equal. In addition, the shear stress parallel to the interface must be the same in both fluids.
Along a horizontal free surface of water and air, the water and air velocities must be equal and the shear stresses must match. However, since air << water, a good approximation is that the shear stress at the water surface is negligibly small.
![Page 87: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/87.jpg)
87
Boundary conditions along a plane of symmetry are defined so as to ensure that the flow field on one side of the symmetry plane is a mirror image of that on the other side, as shown here for a horizontal symmetry plane.
Other boundary conditions arise depending on the problem setup.
For example, we often need to define inlet boundary conditions at a boundary of a flow domain where fluid enters the domain.
Likewise, we define outlet boundary conditions at an outflow.
Symmetry boundary conditions are useful along an axis or plane of symmetry.
For unsteady flow problems we also need to define initial conditions (at the starting time, usually t = 0).
![Page 88: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/88.jpg)
88
Geometry of Example 9–15: viscous flow between two infinite plates; upper plate moving and lower plate stationary.
![Page 89: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/89.jpg)
89
A fully developed region of a flow field is a region where the velocity profile does not change with downstream distance. Fully developed flows are encountered in long, straight channels and pipes. Fully developed Couette flow is shown here—the velocity profile at x2 is identical to that at x1.
![Page 90: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/90.jpg)
90
![Page 91: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/91.jpg)
91
![Page 92: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/92.jpg)
92
For incompressible flow fields without free surfaces, hydrostatic pressure does not contribute to the dynamics of the flow field.
![Page 93: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/93.jpg)
93
The linear velocity profile of Example 9–15: Couette flow between parallel plates.
![Page 94: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/94.jpg)
94
Stresses acting on a differential two-dimensional rectangular fluid element whose bottom face is in contact with the bottom plate of Example 9–15.
![Page 95: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/95.jpg)
95
A rotational viscometer; the inner cylinder rotates at angular velocity , and a torque Tapplied is applied, from which the viscosity of the fluid is calculated.
![Page 96: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/96.jpg)
96
![Page 97: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/97.jpg)
97
![Page 98: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/98.jpg)
98
![Page 99: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/99.jpg)
99
![Page 100: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/100.jpg)
100
![Page 101: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/101.jpg)
101
![Page 102: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/102.jpg)
102
![Page 103: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/103.jpg)
103
![Page 104: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/104.jpg)
104
![Page 105: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/105.jpg)
105
![Page 106: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/106.jpg)
106
![Page 107: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/107.jpg)
107
![Page 108: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/108.jpg)
108
![Page 109: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/109.jpg)
109
![Page 110: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/110.jpg)
110
![Page 111: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/111.jpg)
111
![Page 112: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/112.jpg)
112
![Page 113: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/113.jpg)
113
![Page 114: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/114.jpg)
114
![Page 115: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/115.jpg)
115
Summary• Introduction• Conservation of mass-The continuity equation
Derivation Using the Divergence Theorem Derivation Using an Infinitesimal Control Volume Alternative Form of the Continuity Equation Continuity Equation in Cylindrical Coordinates Special Cases of the Continuity Equation
• The stream function The Stream Function in Cartesian Coordinates The Stream Function in Cylindrical Coordinates The Compressible Stream Function
• The differential linear momentum equation-Cauchy’s equation Derivation Using the Divergence Theorem Derivation Using an Infinitesimal Control Volume Alternative Form of Cauchy’s Equation Derivation Using Newton’s Second Law
![Page 116: Kinematics Dynamics](https://reader035.fdocuments.us/reader035/viewer/2022082206/55cf990a550346d0339b336b/html5/thumbnails/116.jpg)
116
• The Navier-Stokes equation Introduction Newtonian versus Non-Newtonian Fluids
Derivation of the Navier–Stokes Equation for Incompressible, Isothermal Flow
Continuity and Navier–Stokes Equations in Cartesian Coordinates
Continuity and Navier–Stokes Equations in Cylindrical Coordinates
• Differential analysis of fluid flow problems Calculation of the Pressure Field for a Known
Velocity Field
Exact Solutions of the Continuity and Navier–Stokes Equations