Kaolin Clay for Paints and Coatings

VALUE FROM THE GROUND UP

KaMin LLC kaolin clays are backed by superior customer, sales and technical service.

Value from the ground up.

Kaolin extenders are designed to meet the requirements for each application.

KaMin LLC is a manufacturer of high quality

hydrous and calcined kaolin and its high

quality reserves and proprietary processing

technologies produce kaolins for a variety

of applications.

Coatings ExpertiseArchitectural

OEM/Industrial

Powder

Specialty

Water-WashedCoarse

Delaminated

Fine

Ultra-fine

Treated

CalcinedStandard

Fine

With a state-of-the-art paints and coatings

laboratory in Macon, GA, and supported by

customer care in the same location, KaMin LLC

backs up its technology commitment to

its customer.

To further support its drive for technological

excellence, direct sales personnel and a

dedicated network of global chemical

distributors work tirelessly to tackle tough

formulation challenges.

Your choice in kaolin is easy.

KaMin LLC mines kaolin clay deposits which have very low levels of crystalline silica. Levels are further reduced during processing.

For more information, please visit www.kaminllc.com and select the product finder to download MSDS and technical data sheets.

Product Physical Form

Average Stokes Equivalent Particle Size (µm) pH

Oil Adsorption g/100g Brightness*

extending gloss and semi-gloss coatings Maintain high gloss and lower formulation costs with these ultrafine, platy kaolin clays

Polygloss® 90 ultrafine powder 0.2 7 42 91 Ultrafine, highly pulverized, premium brightness kaolin clay for extending high gloss solvent and water-borne coatings

Lithosperse® 7005CS ultrafine powder 0.4 n/a 40 84 Treated kaolin developed for inks, disperses easily in solvent-based systems without grinding

KaMin™ HG90 spray dried bead 0.2 7 42 91 High brightness, ultrafine kaolin extender for water-borne glossy paints and coatings, bright whites to deeptone colors

KaMin™ TEK 2001 spray dried bead 0.25 7 34 92 High brightness, ultrafine kaolin extender for glossy water-borne coatings, bluer undertone vs. KaMin HG-90

extending flat and low-sheen coatingsCalcined clays are structured pigments imparting opacity and scrub resistance

KaMin™ 2000C powder 0.6 6 80 93 Highest brightness, smallest particle size, calcined kaolin clay, more cost-effective TiO2 extender than KaMin 70C

KaMin™ 70C powder 1.3 6 54 91 High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content

extension - water washed kaolinWater-washed kaolin clays offer good reinforcement, neutral pH, and extremely low crystalline silica and salt content.

KaMin™ 35 powder 4 7 27 83 Coarsest, lowest oil absorption kaolin for both water-borne and solvent-based frost-free exterior and interior/exterior primer/sealer applications.

KaMin™ 35B spray dried bead 4 7 27 83 Coarsest, lowest oil absorption kaolin for water-borne frost-free exterior and interior/exterior primer/sealer applications.

KaMin™ 80 powder 0.5 7 42 87 Cost effective, kaolin clay extender for both water-borne and solvent-based adhesives, inks and coatings

KaMin™ 80B spray dried bead 0.5 7 42 87 Cost effective, kaolin clay extender for water-borne adhesives, inks and coatings

KaMin™ 90 powder 0.4 7 43 88 Fine particle size kaolin clay for both water-borne and solvent-based EIFS, inks and coatings

KaMin™ 90B spray dried bead 0.4 7 43 88 Fine particle size kaolin clay for water-borne EIFS, inks and coatings

KaMin™ HG spray dried bead 0.2 7 33 88 Fine particle size kaolin clay for water-borne EIFS, inks and coatings

delaminated kaolin clays for primers and barrier coatings

Polyplate® P01 powder 0.75 7 42 88 Large, platy delaminated clay ideal for both water-borne and solvent-based primers to reduce vapor transmission rate

Polyplate® P spray dried bead 1 7 45 88 Large, platy delaminated clay ideal for water-borne primers to reduce vapor transmission rate

Polyplate® HMT spray dried bead 1.2 7 42 88 Largest, platy delaminated clay, with a higher aspect ratio than Polyplate P, for water-borne paints and coatings

KaMin™ 611 spray dried bead 0.4 7 40 91 Naturally delaminated clay for use in water-borne paints and coatings

* These are typical properties - not specifications

What can KaMin LLC do for you?

Kaolin clays by KaMin LLC enhance the performance, cost and appeal of paints and coatings. Whether it’s an architectural, industrial, powder, or specialty coating, KaMin LLC products are formulated to provide the desired benefit for each type of coating. These benefits include:

Cost Effective Resin and TiO – 2 Extension

Gloss and Sheen Control –

Rheology Control and Suspension –

Environmentally Friendly –

Durability, Weathering and Barrier –Enhancement

Washability and Scrub Resistance –

Opacity and Tinting Strength – KaMin LLC(478) 750-5484askus@kaminllc.com www.kaminllc.com

THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Refer to KaMin LLC’s Standard Conditions of Sale for the only express warranties applicable to the KaMin LLC products. Products incorporating KaMin products are not warranted by KaMin LLC. In no event is KaMin LLC liable for consequential damages. © 2008 KaMin LLC

KaMin™ is a registered trademark of KaMin LLC for kaolin clay.Lithosperse® is a registered trademark of KaMin LLC for kaolin clay.Polygloss® is a registered trademark of KaMin LLC for kaolin clay.

IND / NA / P & C / Rev II / Oct 08