Kamal ahmed cv
Click here to load reader
-
Upload
kamal-ahmad -
Category
Documents
-
view
88 -
download
0
Transcript of Kamal ahmed cv
Kamal Ahmed Tel:- +966 502 519 961 [email protected]
Objective
I’m a qualified Mechanical Engineer who is adaptable and innovative with experience creating cost efficient
designs. I’m looking to develop my expertise in new concept development, simulation and validation within a
forward thinking company.
Certificates Mechanical Engineering and Mechatronics, HVAC, Fire Fighting and Plumbing.
Education BSc Mechanical Engineering and Mechatronics, Jordan University for Science and Technology
Aspect College Diploma IN English Language.
Work Experience
Saudi Ruwad Civil Construction (Saudi RCC) Mechanical Engineer May 2015 – Dec 2015 Burj Al Khair, Jeddah Responsible for the work of High Rise Tower Mechanical works costing over 26.5 Million.
Scope:
Fire Fighting(Sprinkler and FM-200)
Pressurized fan for stair case
Chilled Water System (1100 Tons)
Ducting And Ventilation
Plumbing
Elevator(7 Units)
Cleaning Device
Irrigation System
Key Achievements:
Handled the work schedule, inspections and approvals for a work force of around 60 mechanical personnel at
Coordinated for all the technical and site work for the project.
Handled Procurement and Final Stages took over the complete work due to the termination of major
subcontractors with a team of 40 personnel.
Tuhama Contracting Company Mechanical Engineer March 2015-May 2015
Tughri Compounds
70Villas and Infrastructure consisting of 1 under and 2 upper Level .
Handled the work schedule, inspections and approvals for a work force of around 30 mechanical personnel,
Coordinated for all the technical and site work for the project.
Achievements:
Installation all plumping work s inside villas.
Installation split A/C’s for villas and it’s drainage.
Installation Underground sewage and rainwater piping using UPVC pipes.
Mechanical infrastructure Engineer Sept 2012-March 2015
Al Jouf University
Infrastructure Development of Al Jouf University covering area of over 9.5 Sq.Km.
Handled the work schedule, inspections and approvals for a work force of around 40 mechanical personnel,
Coordinated for all the technical and site work for the project.
Achievements:
Installation Potable/firefighting and Irrigation Networks using UPVC pipes class 5.
Installation Sewage and rainwater Networks using UPVC class 4 and RC pipes .
Installation Sewage Treatment plant(STP) east capacity 10000m3/day.
Installation Sewage Treatment Plant (STP) west capacity10000m3/day.
Installation Potable & Fire pump station each pump(Q=125L/S & H=80M),152kw(4set.)
Installation (11) lift stations for sewage water each pump (Q=55L/S & H=20M),20.55kw (3set).
Installation irrigation pump station every pump (Q=170L/S & H=60M) 152kw east, west(2set).
Installation deep well diameter 14" casing with mechanical perforate depth=70m(13deep well).
.
Certifications Trainee Sela-pass Automation and Safety systems
Jordon University of Science and Technology, Energy Centre
o Heating, Ventilation and Air Conditioning
Cambridge Training Institute
o Heating, Ventilation and Air Conditioning
o Fire fighting Design and installation
o Plumbing Design and Installation
Technical Skills MS Office, AutoCAD, Revit MEP, HAP, C++ and ProEngineer.
Personal Details Nationality: Yemeni
D.O.B.:- 29th May, 1987
Marital Status: Married
Saudi residence (Transferable iqama)
Valid driving licence