ABB Kabeldon Cable Joints Terminations Separable Connectors LV HV
Kabeldon Parallel Connector CSEP-A for Cables With Cu Tape Screen English 2012[1]
Transcript of Kabeldon Parallel Connector CSEP-A for Cables With Cu Tape Screen English 2012[1]
![Page 1: Kabeldon Parallel Connector CSEP-A for Cables With Cu Tape Screen English 2012[1]](https://reader031.fdocuments.us/reader031/viewer/2022020417/55cf9a4c550346d033a1264a/html5/thumbnails/1.jpg)
Screened separable parallel connector for cables with Cu-tape screen, 630 A CSEP-A 12–36 kV
Product information , Kabeldon cable accessories, April 2012
Application areaCSEP-A is a screened separable parallel connector designed to be connected to a screened separable connector type CSE-A 630.
− Fits systems for 12–36 kV. − Rated current: 630 A − Provides a compact installation.
Standard − Fulfills the requirements of CENELEC HD 629.1 S2.
DesignCSEP-A has a premolded body, manufactured in rubber with three layers; a conductive inner layer, an insulation layer and a conductive outer layer that are vulcanized together for the best possible interface between the layers.
The connector contains both a capacitive test point with a protective cap and an integrated earthing wire for the rubber body.
Delivered in 3-phase kits complete with cable lugs, bolt connections and stress grading adapters.
Conductor cross section Designation ID number Rated current Insulation diameter Weight
mm² A mm kg/kit
Parallel connector for 12 kV, 3 x 1-core cables
25–70 CSEP-A 12630-01 R 2GPJ 62341294 630 13–20 5.7
95–300 CSEP-A 12630-02 S 2GPJ 62341295 630 18.5–30.5 6.1
400 CSEP-A 12630-03 T 2GPJ 62341296 630 30.5–45 8.6
Parallel connector for 12 kV, 3-core cables
25–70 CSEP-A 12630-01 RA 2GPJ 62341303 630 13–20 5.7
95–185 CSEP-A 12630-02 SB 2GPJ 62341304 630 18.5–30.5 6.1
240–300 CSEP-A 12630-02 TB 2GPJ 62341305 630 18.5–30.5 6,1
400 CSEP-A 12630-03 TB 2GPJ 62341306 630 30.5–45 8.6
Parallel connector for 24 kV, 3 x 1-core cables
35–70 CSEP-A 24630-01 S 2GPJ 62341297 630 17–24 5.7
95–300 CSEP-A 24630-02 T 2GPJ 62341298 630 22.5–35 6.1
400 CSEP-A 24630-03 T 2GPJ 62341299 630 30.5–45 8.6
Parallel connector for 24 kV, 3-core cables
35–70 CSEP-A 24630-01 SB 2GPJ 62341307 630 17–24 5.7
95–300 CSEP-A 24630-02 TB 2GPJ 62341308 630 22.5–35 6.1
400 CSEP-A 24630-03 TB 2GPJ 62341309 630 30.5–45 8.6
Parallel connector for 36 kV, 3 x 1-core cables
50–70 CSEP-A 36630-01 S 2GPJ 62341300 630 24.5–34 6.7
95–300 CSEP-A 36630-02 T 2GPJ 62341301 630 27.5–42 7.1
400 CSEP-A 36630-03 U 2GPJ 62341302 630 38–55 9.8
Parallel connector for 36 kV, 3-core cables
50–70 CSEP-A 36630-01 SB 2GPJ 62341310 630 24.5–34 6.7
95–300 CSEP-A 36630-02 TB 2GPJ 62341311 630 27.5–42 7.1
Note: − For 3-core cables with common Cu-tape screen a screen
separation kit must be used.
![Page 2: Kabeldon Parallel Connector CSEP-A for Cables With Cu Tape Screen English 2012[1]](https://reader031.fdocuments.us/reader031/viewer/2022020417/55cf9a4c550346d033a1264a/html5/thumbnails/2.jpg)
Doc
umen
t ID
: 7A
BA
1022
43
For additional information please contact:
ABB ABKabeldonBox 531SE-441 15, Alingsås, SwedenTel: +46 322 770 00Fax:+46 322 770 01e-mail: [email protected]
www.abb.com/cableaccessories© Copyright 2012 ABB. All rights reserved.
Designation Fig
No.
Dimensions
A B H Ø C-C
mm
CSEP-A 12630-01 1 100 72 256 81 min 85
CSEP-A 12630-02 1 100 72 256 81 min 85
CSEP-A 12630-03 2 114 90 314 85 min 90
CSEP-A 24630-01 1 100 72 256 81 min 85
CSEP-A 24630-02 1 100 72 256 81 min 85
CSEP-A 24630-03 2 114 90 314 85 min 90
CSEP-A 36630-01 1 122 74 283 81 min 85
CSEP-A 36630-02 1 122 74 283 81 min 85
CSEP-A 36630-03 2 136 90 314 85 min 90
Fig 1 Fig 2
ØØ C-CC-C ØØ C-CC-CAA
H
B
9 mm9 mm AA
B
HH
9 mm9 mm
CSE-A screened separable cable connector installed with CSEP-A parallel connector. This combination fulfills the requirements of CENELEC HD 629.1 S2.All Kabeldon CSEP-A when connected to CSE-A has a total depth of less than 350 mm. CSE-A CSEP-A