PAINTSQUARE.COM JOURNAL OF PROTECTIVE ... Issues That Do Not Meet the Eye: Design Considerations for...
Transcript of PAINTSQUARE.COM JOURNAL OF PROTECTIVE ... Issues That Do Not Meet the Eye: Design Considerations for...
WASTEWATER TREATMENTPLANT COATING SYSTEMS: SELECTING AND SOURCING
A JPCL eResource
jpclP A I N T S Q U A R E . C O M J O U R N A L O F P R O T E C T I V E C O A T I N G S & L I N I N G S
i
Wastewater TreatmentPlant Coating Systems: Selecting and Sourcing
A JPCL eBook
Copyright 2013 byTechnology Publishing Company2100 Wharton Street, Suite 310
Pittsburgh, PA 15203
All Rights Reserved
This eBook may not be copied or redistributed without the written permission of the publisher.
Introduction
Issues That Do Not Meet the Eye: Design Considerationsfor Lining Concrete Tanks in Wastewater Treatment Plantsby Randy Nixon, Corrosion Probe, Inc.
Coating System Guide for Wastewater Treatment Plants
Coating Company Profiles
Contents
ii
SPONSORED BY
iv
1
10
23
Contents
Pub/Issue Journal of Protective Coatings and Linings_August 2013 Size B: 8 3/8” x 11 1/8” T: 8 1/8” x 10 7/8” L: 7” x 10”
File Name PPG_I&I_Jour_Protect_Coat_Linings
Client PPG Industries
THINK TANK
PAINTS - COATINGS - OPTICAL PRODUCTS - SILICAS - GLASS - FIBER GLASS
Bringing innovation to the surface.™
Brilliant coating technology supported by an expert supply network. For maximum asset protection, water infrastructure facilities across North America rely on PPG Protective Coatings for the exterior and interior of potable water tanks and other facility structures. Our full line of patented PSX® topcoats offers superior color and gloss retention with the corrosion resistance of an epoxy. And, we’ve added nearly 100 new service centers and several hundred new supply points. So no matter where you are in North America, you have ready access to PPG’s water infrastructure coating expertise and coating systems that last longer, look better, and make maintenance easier.
Visit www.bringinginnovation.com/industrial.aspx to learn how PPG innovation helps our industrial and infrastructure partners meet their performance, color, and cost-saving goals.
PSX and the PPG Logo are registered trademarks and Bringing Innovation to the Surface is a trademark of PPG Industries Ohio, Inc. © 2013 PPG Industries, Inc. www.ppg.com
iv
Introduction
Introduction
This eBook consists of a feature published in the Journal ofProtective Coatings & Linings (JPCL) on lining concrete tanksin wastewater plants, as well as JPCL Buying Guide material onselecting and specifying coatings for wastewater applications invarious exposure environments. Author and company information is based on the date the materials were first published in JPCL.
The Buying Guide is organized by various exposure types,such as “Interior Exposure Environment” for concrete. Then,coating manufacturers are listed in alphabetical order, witheach company’s preferred system named in both proprietaryand generic terms. Finally, contact details are given for all thecompanies.
This collection is designed to provide general guidance on selecting and specifying coatings for wastewater plants, andthen to give sources for acquiring the appropriate systems.
iStockphoto
1
Editor’s Note: This article appearedin JPCL in March 2012.
By Randy Nixon,Corrosion Probe, Inc.
T his article focuses on several condition assessment and design
considerations associated with protective linings for corro-
sion protection in concrete sludge storage and mixing tanks
that have been shown to substantially affect performance. Issues include
evaluation methods, substrate conditions, surface preparation decisions,
tank geometry vis-à-vis reflective cracking of organic linings, and high
external ground water conditions around sludge tanks. The lessons
discussed result from knowledge gained through failure analyses
performed by the author over the past 15 years. The reference projects
used to demonstrate the above key points involved existing sludge tanks
in municipal wastewater treatment plants.
I S S U E S T H A T D O N O T M E E T T H E E Y EDesign Considerations for Lining Concrete Tanks in Wastewater Treatment Palnts
©iStockphoto/j_markow
2
Sludge tanks in wastewater treatment plants
are used for various purposes including, among
others, storing primary sludge before thicken-
ing and sludge digestion, storing waste-acti-
vated sludge before sludge treatment, mixing
plant sludge with imported sludge to be incin-
erated, and storing digested sludge to be con-
veyed later to dewatering. Many years ago
some treatment plants used to mix and jointly
thicken primary sludge and waste-activated
sludge, but this created significant odor and
corrosion problems. The waste-activated
sludge provided ample microbes while the pri-
mary sludge gave the “bugs” lots of food. This
promoted enhanced microbiological activity
and hence higher corrosion rates and odor
complaints. The practice was therefore discon-
tinued. Depending on the type of sludge stored
and the residence time for sludge, sludge stor-
age tanks can have very corrosive headspaces.
In addition, because sludge storage tank levels
often fluctuate substantially, corrosion can
occur at varying headspace elevations. Fur-
thermore, due to rare redundancy in plants,
sludge tanks seldom come out of service for in-
spection and maintenance. Accordingly, dam-
age can frequently be severe before corrective
action is taken. In general, undigested sludge
can be very corrosive because of the liberation
of sewer gases including methane (CH4), car-
bon dioxide (CO2), and hydrogen sulfide (H2S).
In the headspace of these tanks, these acidic
gases and oxygen establish perfect conditions
for aggressive biogenic sulfide corrosion. The
most cost-effective solutions to this degrada-
tion mechanism are properly selected and in-
stalled lining systems based on industry
experience. Several important design consid-
erations when using protective linings to pro-
tect sludge tanks are not necessarily obvious
without the requisite experience. This article
attempts to shorten the learning curve for
those who lack the same experience to which
this author has been exposed.
CONDITION ASSESSMENT ANDDESIGN CONSIDERATIONSTHAT DON’T MEET THE EYEPart 1 – Evaluation Methods and Substrate ConditionsWhen biogenic sulfide-corrosion occurs in the
headspace of sludge tanks, sulfuric acid attack
of the highly alkaline Portland cement in the
concrete is accompanied by sulfate attack of the
cement paste below the reaction zone in the
concrete. The acid-base reaction causes dissolu-
tion of the cement paste and the formation of
calcium sulfate or gypsum from the reaction
shown in Fig. 1.
Calcium sulfate further reacts with the tri-
calcium aluminate in the Portland cement to
form calcium sulfoaluminate compounds, much
larger compounds than the original calcium hy-
droxide and calcium silicate hydrates (Fig. 2).1
This reaction promotes expansive deteriora-
tion of the concrete manifested by microcrack-
ing and disintegration of the paste and
aggregate matrix.
Because acidic attack and sulfate reactions as-
sociated with biogenic sulfuric acid attack occur
in sludge tank concrete, removing contaminated
concrete before installing concrete repair mate-
rials or linings is crucial to prevent ongoing con-
crete degradation beneath lining systems. When
removal is not adequately performed, prema-
ture lining delamination failures can occur.
In 2008, a failure analysis of a trowel-ap-
plied epoxy lining system in several sludge
storage tanks showed widespread delamina-
tion from the concrete (Figs. 3 and 4). The lin-
ings had been installed 11⁄2 years earlier in
seven sludge tanks in two New York State
H2SO4 + Ca(OH)2 CaSO4 + 3H2Osulfuric Acid + calcium hydroxide calcium sulfate + water
(25% of hydrated (or Gypsum)Portland Cement)
Fig. 1: The acid-base reaction causes dissolution of the cement paste and formation of calciumsulfate or gypsum.
3
wastewater treatment plants.
The delaminated lining samples showed no
evidence of chemical attack, pinholes, or im-
proper cure. A relatively thin layer of concrete
was attached to the back of all delaminated
samples (Fig. 5). The thickness of concrete var-
ied between 1⁄8 in. and 1⁄2 in. The concrete layer
was weak and easily crumbled by hand. On
this degraded concrete, pH measurements
showed values between 5.0 and 6.0. Further
examination of the degraded concrete showed
the cement paste to exhibit yellowish discol-
oration. The concrete under the disbonded lin-
ing was chipped back for pH gradient
measurements (Table 1).
The pH measurements clearly showed that
the concrete had continued to degrade under-
neath the epoxy lining. The following facts
about cement paste pH depression from acidic
reactions are especially relevant.
•Newly hydrated concrete—cement paste pH
= 12.5 plus
•pH reduction to less than 12.0—loss of potas-
sium and sodium hydroxides
•pH reduction below 10.0—loss of calcium hy-
droxide
•pH reduction below 8.0—loss of calcium sili-
cate hydrates and possible ongoing acidic re-
actions in paste
Based on the author’s previous work on sul-
furic acid attack of concrete in acid manufac-
turing plants, he decided that ongoing sulfate
reactions were also likely involved in this
sludge tank lining failure. Accordingly, sulfate
concentration analyses were performed on sev-
eral samples taken from the degraded concrete
and on what appeared to be sound concrete at
varying depths into the substrate. The testing,
done according to ASTM C114, was performed
on drilled concrete powder samples (Table 2, p.
26). Sulfate concentrations are typically low in
concrete because the main source of sulfate is
the minute percentage of gypsum added to ce-
ment for set control. For Portland cement Types
3CaSO4.2H2O + 3CaO.Al2O3 + 26H2O -> 3CaO.Al2O3.3CaSO4.32H2O
calcium sulfate di-hydrate + tri-calcium aluminate calcium aluminate tri-sulfate hydrate(ettringite)
Fig. 2: Calcium sulfate reacts with tri-calcium aluminate in Portland cement to form calciumsulfoaluminate compounds.
Fig. 3: Large area of lining delamination on ceiling.Photos and drawings courtesy of the author unless otherwise noted
Fig. 4: Typical mapped-out areas of lining delamination in one of the tanks.
SAMPLE #4 location
Determination areas
Roof hatch
Tank No. 2 – North PlantScale 1/8” = 1’0”
Delamination areas
SAMPLE #3 location
SAMPLE #5A &SAMPLE #5Blocations
Roof hatch
Delamination area
Agitator shaftpenetration
Roof hatch
Staining
Delamination area
Rust bleeds
North Plant Sludge Tank #2Condition Analysis
REFLECTED CEILING PLAN
4
I and II, the mean concentration for sulfate as
SO3 is between 2.7 and 3 percent by weight of
cement respectively.
The ranges of sulfate concentration in differ-
ent types of Portland cement are published in
ACI 225R in Table 3.2.2
Assuming the concrete weighs 140.7 lbs. per
cubic foot (CF), the weight per cubic yard (CY)
would be 3,800 lbs. Assuming a cement content
of 6 bags per CY @ 94 lbs. per bag, the total ce-
ment content would be 564 lbs. per CY. Given
a 3% by weight of cement maximum sulfate
content as SO3 for Type I Portland cement, the
maximum expected sulfate content for the con-
crete (assuming no outside source) could be cal-
culated as follows.
3,800 lbs. ÷ 564 lbs. = 6.7
3% ÷ 6.7 = 0.45% by weight of sample for
sulfate (as SO3) maximum for the original
concrete.
The test data clearly showed that sulfate reac-
tions were likely to be continuing within the
concrete substrate at depths between 1⁄2 in. and
1 in. below the exposed substrate. This infor-
mation was used to select the average depth of
concrete removal for the subsequent relining
work. Before and during surface preparation,
pH measurements and sulfate content testing
were performed to ensure adequate depth of
concrete removal before resurfacing and relin-
ing work. A concrete surface pH range of 8.0
to 10.0 has been shown to avert unseen sub-
strate degradation. Sulfate content of 0.45%
(percent weight of concrete sample) or less for
the concrete has also avoided ongoing sub-
strate breakdown.
Part 2—Substrate Integrity and Concrete Repair MortarsIn two failure analyses projects on linings in
sludge storage tanks, one in Florida and one in
New Jersey, the failure mechanism was cohe-
sive failure of weak cementitious repair mor-
tars: the epoxy and polyurethane lining
systems delaminated because the repair mortar
was weak. These failures were investigated in
2005 and 2000 respectively. Both linings were
installed within 2 to 3 years of the failure analy-
ses. In both cases, the normal lateral curing
stresses associated with an epoxy lining and a
flexible polyurethane lining exerted sufficient
forces to cause the weak cementitious repair
mortars beneath the linings to fail cohesively. In
both cases, weak cement mortar was found on
Fig. 5: Back/cementitious side
Fig. 6: Flexible polyurethane lining—cohesive failure within cementitious mortar—New Jersey
5
the backside of lining chips from the delami-
nated linings (e.g., Fig. 6).
The first lesson learned here was always test
the cured repair mortar, whether cementitious,
polymer-modified cementitious, or purely resin-
based, for substrate adhesion and integrity
(ASTM C1583) before applying the lining.3
Baseline testing of the parent concrete using
that same standard is prudent after surface
preparation and before applying the repair
mortar. A good rule of thumb is 350 to 400 psi
for parent concrete substrate pull strengths.
Also conduct hammer sounding of the sub-
strate and the repair mortar to identify any
areas of concern between adhesion test loca-
tions. Listen for the ringing sound or the thud.
If parent concrete pull test values are below
300 psi, evaluate substrate integrity more care-
fully. In addition, calibrate your design expec-
tations for repair mortar adhesion by your
parent concrete test results. Similarly, specified
lining adhesion values in accordance with
ASTM D72344 should be based on the repair
mortar test results per the ASTM C15835 test
findings. Good lining system adhesion should
generally be around 400 psi or higher.
Many manufacturers of cementitious repair
mortars (based on calcium aluminate and/or
Portland cement) for concrete do not require
further preparation of these products before
application of organic lining systems. Instead,
they permit broom finishing of the mortars to
create a surface profile (Fig. 7). This author’s ex-
perience has shown that broom-finished ce-
mentitious mortars create a weak, laitance-rich
layer conducive to cohesive adhesion failures.
Both lining failures in the Florida and New Jer-
sey tanks fell into this category.
An additional lesson was that floated and
troweled finishes of repair mortars provide
more uniform surface profiles when properly
blast cleaned (Fig. 8). Broom-finished mortars
cause more shrinkage cracking and variation in
surface profile than necessary (Fig. 9). Uniform
concrete surface profiles make lining applica-
tion more uniform as well.
The relining of two sludge storage tanks in
Connecticut added to the lessons learned about
repair mortars and linings. A cementitious shot-
crete mortar was used for substrate restoration
followed by blast cleaning and installation of a
125-mil-thick troweled epoxy lining with sub-
sequently spray-applied epoxy glaze coat. Ad-
hesion testing was performed during the project
with the following average results.
• Parent concrete substrate after surface prepa-
ration in accordance with ASTM C1583: 400 to
425 psi with failure 100% within concrete
• Repair mortar before abrasive blast cleaning
in accordance with ASTM C1583: 150 to 185
psi with failure mostly within upper 1⁄8 in. of re-
pair mortar
• Repair mortar after surface preparation to
CSP 5 in accordance with ASTM C1583: 400
psi with failure mostly within concrete (90%).
• Epoxy lining in accordance with ASTM
D7234: 400 to 450 psi with failure mostly
within the repair mortar
After two years in service, the tanks are in
excellent condition.
The main lesson learned here is that after
proper cure, cementitious repair mortars should
be blast cleaned. A secondary, related lesson is
that the adhesion of organic linings to polymer-
modified (waterborne or resin-based) mortars or
filler/surfacers is far better than to cementi-
Depth Below Exposed Substrate pH Measurements1/8 6.0 to 7.0
1/4 to 1/2 9.0 to 10.0
Fig. 7: Typical broom finish on cementitious repair mortar.
Fig. 9: Blast cleaned repair mortarthat was broom finished.
Fig. 8: Blast cleaned floated mortarrepair.
Table 1: pH Gradient Measurements of Concrete Beneath Disbonded Lining
tious resurfacing materials when not blast
cleaned. However, the cost of surface restora-
tion rises dramatically for polymer-modified ce-
mentitious or pure polymer-based mortars as
restoration depth requirements increase.
Therefore, design decisions need to be based
on material and labor costs relative to the depth
of restoration required. This ties Parts 1 and 2
of this paper together. Once you can define the
depth of concrete removal, you can decide how
best to approach restoration and lining material
selection. In the author’s experience, combined
restoration and concrete profile depths of about1⁄2 to 3⁄4 inches or less lend themselves best to the
use of polymer-modified cementitious (water-
borne or polymer resin-based) or pure polymer
mortars for restoration. The lower labor costs
realized through no additional surface prepara-
tion offset the higher mortar material costs.
When combined restoration and surface profile
depths exceed 3⁄4 inch, the use of shotcrete-ap-
plied cementitious repair mortars are prefer-
able, provided they are blast cleaned following
proper cure.
Part 3—Sludge Tank Geometry and Reflective Cracking of LiningsThe decision to specify polyurethane, polyurea,
PVC, or other flexible linings instead of non-
flexible epoxy linings mostly rests on the con-
cern over thermally induced movement at
existing cracks in the concrete structure. Load-
related movement is considered rare in sludge
tanks because of the gradual filling and draw
down of contents. Flexible lining technologies
have provided excellent corrosion resistance
and low permeability properties for good sludge
tank performance.
However, active structural movement mani-
fested at through-section shrinkage, settlement,
or load-related stress cracks in concrete tanks
can result in reflective cracking of rigid-cured,
brittle resin systems such as epoxy linings. Re-
flective cracking of linings in sludge tank head-
spaces exposes the substrate to sulfuric acid at-
tack over time, undermining lining system
adhesion (Fig. 10). Flexible linings often can
bridge reflective cracking. However, these tech-
nologies are far more sensitive to moisture and
temperature and more complicated to apply
than most epoxy linings.
In the author’s experience, active movement
manifested at concrete substrate cracks is more
frequent and likely in the walls of rectangular
tanks than in round tank walls. The inspection
of round tank walls typically has indicated that
fewer vertical, through-wall, restrained drying
shrinkage cracks occur compared to the longer
expanses of straight rectangular tank walls, a
phenomenon associated with the length of the
walls during concrete shrinkage. Much more
rigid than straight concrete walls, shell struc-
tures such as round tank walls, and domes are
much more resistant to movement, whether in-
duced by thermal change or hydraulic loading.
This geometry difference appears to account for
fewer reflective cracking problems when lining
round sludge tank walls. Empirically, this ap-
pears to be true regardless of similar thermal
exposure conditions for square or round tanks.
In contrast to tank walls, reflective cracking
in sludge tank covers or roof slabs depends on
geometry and thermal exposure. Again, mainly
because of the less flexible nature of the struc-
tural geometry, domed concrete roofs tend to
exhibit less active movement at cracks in the
concrete than flat roofs. However, for rectan-
gular and round tanks, the greater the dispar-
ity is between internal and external
temperatures across the roof section during op-
eration, the greater the likelihood of reflective
cracking. For sludge tanks, more original
shrinkage cracks are typically found in flat rec-
tangular roofs than in domed roofs. This in large
measure explains the higher frequency of re-
flective cracking of linings in rectangular tanks.
However, the inspection of the domed roof
6
Fig. 10: Typical reflective cracking ofan epoxy lining taken in sludge tankin Virginia in 1997. The lining wasinstalled in 1992.
slabs of several sludge tanks exposed to varied
outdoor temperatures showed a greater
propensity for reflective cracking of rigid,
cured linings compared to the walls in the same
tanks. This is partly caused by the greater like-
lihood of through-section shrinkage cracks in
roof slabs and the differential temperatures to
which roof slabs are often exposed. The inter-
nal sludge temperatures remain quite constant,
but the outdoor temperatures can vary widely.
This differential temperature exposure causes
expansion and contraction in the structure con-
ducive to reflective cracking of the tank’s lining.
The above notwithstanding, the thermal ex-
posure can affect reflective cracking at tank
walls. Sludge tank walls exposed to varied an-
nual outdoor temperatures, whether the tank is
round or rectangular, are more likely to experi-
ence reflective cracking of linings. Conversely,
sludge tanks housed in buildings or insulated ex-
hibit a much lower tendency for active move-
ment at cracks despite the geometry. And sludge
tanks built below grade have a much lower like-
lihood for active movement at cracks because
ground temperatures are more constant.
The lessons here are mainly two-fold. First,
the selection of flexible linings versus non-flex-
ible epoxy linings for sludge tanks should be
founded on a sound understanding of the pres-
ence and frequency of existing through-section
cracks. Second, the propensity for active move-
ment at those cracks should be carefully as-
sessed. Some of the lessons above may be
helpful in this assessment. Epoxy linings are eas-
Sample Description Sulfate Content as SO3 by PercentWt. of Sample of Concrete
Degraded concrete on back of lining samples .97
¼” to ½” into substrate below failure .82
½” to 1” into substrate below failure .64
7
Fig. 11: Typical lining detail at concrete cracks (N.T.S.).
125 mils troweledepoxy lining w/15-20 mils epoxyglaze topcoat
4” wide scrim cloth
Epoxy base coatand saturant
Chip out & notch 1/4”x1/4”@ crack. Fill notch andcoat concrete surface w/epoxy surfacer
3-6 mil primer4”
Table 2: Typical Results for the Powder Samples Tested from the New York State Sludge Tanks
ier to apply than polyurethane linings and ex-
hibit fewer adhesion concerns related to rapid
set times, lack of wetting properties, and mois-
ture sensitivity. However, flexible polyurethane
and polyurea linings can be successfully in-
stalled if the propensity for reflective cracking is
known or estimated to be significant.
Additionally, it is important to recognize that
if a small amount of active movement at sub-
strate cracks is expected especially in a roof
slab, epoxy and other rigid cured linings can
also be reinforced or treated at crack locations
in a number of ways to avert localized reflec-
tive cracking (Fig. 11).
Part 4—Sludge Tank Lining Performance, External Waterproofing, and GroundWater Considerations.Six years after its application, a fully adhered
PVC sheet lining system blistered and disbonded
from the lower concrete walls of a sludge tank in
New England (Fig. 12). The tank was built with
the lower 30% of its walls below grade in a soil
condition exposed periodically to a high water
table. The tank was originally constructed with
one-way relief valves in its sloped concrete floor
to deal with the potential for ground water re-
lated uplift. The PVC sheet lining was termi-
nated at the bottom of the straight wall, leaving
the sloped concrete floor (with relief valves) un-
lined because it is always submerged in sludge
unless the tank is emptied. No external concrete
waterproofing was installed because of high
ground water at the time of construction.
When the lining was installed, moisture test-
ing showed no problem. However, the lining
was installed during very dry summer condi-
tions. Two years after installation, the lining
was re-inspected and no problems were identi-
fied. Four years later, the lining exhibited nu-
merous blisters and a few bladder-like,
water-filled disbonded areas at the lower wall
elevations. The water in the disbonded areas
was clear and had a measured pH of about 10.0.
Close examination revealed that the source of
the water was ground water passing through
joints between the tank walls and floor. The pH
of the ground water was found to be between
6.0 to 7.0. The rise in pH in the blister liquid re-
sulted from passage through the alkaline con-
crete. Additionally, the carbon steel relief
valves within the sloped tanks floor were al-
most all frozen in the shut position because
they were corroded and plugged with sludge.
The tank had been empty for about a year.
There was no internal liquid pressure to offset
the ground water pressure.
In short, high ground water conditions re-
turned when the tank was empty, but the asso-
ciated pressure was not relieved by the
non-functional relief valves on the tank floor.
In contrast, at the upper tank wall elevations
not affected by the ground water, the lining was
well adhered after six years of service (Fig. 13).
Four lessons were learned in this applica-
tion. One, if an existing tank was designed with
ground water relief valves, address the proper
operation of those relief valves during dewa-
tered timeframes when the tank is lined. Sec-
ond, ensure that the tank’s operating level is
maintained above the tank’s exterior grade el-
evation during normal operation. Third, before
making lining decisions, carefully assess any
tank’s location relative to above and below
grade conditions and annual ground water el-
evations. Review available geotechnical re-
ports or ground water monitoring well data to
determine if ground water pressure can be
problematic for lining performance. Fourth,
when making lining design decisions, review
original tank as-built or design drawings to de-
termine if external waterproofing was applied
over the concrete.
The large water-filled blisters and disbonded
areas in this tank’s lining were repaired. The re-
lief valves were repaired, and the tank’s oper-
ating level has been maintained at the exterior
8
(top) Fig. 12: Blistering and disbondment of lining on lower partof concrete wall of sludge tank withwalls built 30% below grade.(bottom) Fig. 13: Lining still adheredwell in upper part of sludge tankwalls after six years of service.
tank grade elevation since the lining failure. No
recurrence of the lining problem has been ob-
served four years after the lining was repaired.
CONCLUSIONSCorrosion mechanisms, concrete chemical eval-
uation methods, substrate integrity testing, re-
pair mortar selection and surface preparation
specifications, sludge tank geometry and ther-
mal exposure condition assessments, and
ground water and external waterproofing is-
sues substantially affect successful design and
the ultimate performance of sludge tank linings.
This paper has attempted to demonstrate and
share with the coatings and wastewater indus-
tries the importance of many of these consider-
ations based on lessons learned from several
years of experience.
NOTES1. ACI 201.2R – 2001, Guide to Durable Con-
crete, Paragraph 2.2.2 American Concrete In-
stitute, Manual of Practice, Part 1.
2. ACI 225R-99, Guide to the Selection and Use
of Hydraulic Cements. Table 3.2 American Con-
crete Institute, Manual of Practice, Part 2.
3. ASTM C1583-04, Standard Test Method for
Tensile Strength of Concrete Surfaces and
the Bond Strength or Tensile Strength of
Concrete Repair and Overlay Materials by Di-
rect Tension (Pull-Off Method)
4.ASTM D7234-05, Standard Test Method for
Pull-Off Adhesion Strength of Coatings on
Concrete Using Portable Pull-Off Adhesion
Testers
5. ASTM C1583 - 04, Standard Test Method for
Tensile Strength of Concrete Surfaces and the
Bond Strength or Tensile Strength of Concrete
Repair and Overlay Materials by Direct Ten-
sion (Pull-Off Method)
About the authorRandy Nixon is presi-dent and founder of Cor-rosion Probe, Inc., aconsulting engineeringfirm that has been inbusiness for over 27years. Mr. Nixon beganhis career with GeorgiaPacific Corp. in 1976 in water/wastewater engi-neering, construction and utilities management.Between 1979 and 1983, he served in manage-ment of specialty contracting services and coat-ings engineering business for two other firms. Mr. Nixon has published over 30 technical pa-
pers and articles through SSPC, NACE, TAPPI,AWWA, WEF and NEWEA. He is widely recog-nized in the water/wastewater industry for hisexpertise and extensive experience in piping cor-rosion, concrete degradation evaluation, and coat-ings/linings for concrete substrates. He receivedone of JPCL’s Top Thinker awards in 2012.
9
10
ABRI IndustriesIronBond 111Inorganic Zinc/Epoxy/Urethane
Arma CoatingsArma 901 Polyurea & Polyaspartic 6000Polyurea Pure (1, 2, or 3 Coats)
Atlas Minerals & Chemicals, Inc.RezkladEpoxy 100% Solids (1 or 2 Coats)
Avilion Inc.PPGEpoxy (1-2 Coats)/Urethane
Blome International/Part of the HEMPEL GroupVersi-LineEpoxy 100% Solids (1 or 2 Coats)
Bowers IndustrialGulf Coast PaintEpoxy (1-2 Coats)/Urethane
CANUSA-CPSWrapid BondTape Wraps
Carboline CompanyCarboxaneOrganic Zinc/Siloxane
CIM IndustriesCIMUrethane Elastomeric (1 Coat)
Cloverdale Paint Inc.ArmourshieldEpoxy (1-2 Coats)/Urethane
Copolymer Protection SystemsChemProof PolymersEpoxy 100% Solids (1 or 2 Coats)
Corotech High Performance CoatingsCorotechOrganic Zinc/Epoxy/Urethane
Corrocoat USA Inc.CorroglassVinyl Ester (3 Coats)
CSL Silicones Inc.Si-Coat 580Siloxane/Siloxane
Denso North AmericaDensoTape Wraps
Devoe HPC (International Paint LLC)Devoe High Performance CoatingsEpoxy (1-2 Coats)/Urethane
Diamond Vogel Paint CompanyIron Prime 600/Finium DTM-ATAlkyd/Acrylic/Acrylic
Duromar, Inc.HPL-1110/HPL-1110Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy/Epoxy 100% Solids
Euclid Chemical CompanyEucothaneUrethane/Urethane
FSC Coatings Inc.Rustop/Silicone Poly PlusEpoxy (1-2 Coats)/Urethane
Gemite Products Inc.Gem-Cote EP 100Epoxy 100% Solids (1 or 2 Coats)
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Goodwest Linings and CoatingsCarboline, Devoe, Sherwin-WilliamsOrganic Zinc/Epoxy/Urethane
Gulf Coast Paint Mfg., Inc.GCPEpoxy (1-2 Coats)/Urethane
Heresite Protective Coatings, LLCCSE-6200/UC-5500Epoxy (1-2 Coats)/Urethane
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.Indurethane 6600 PlusEpoxy (1-2 Coats)/Urethane
Industrial Coatings & SealantsPolycoatPolyurea Hybrid (1, 2, or 3 Coats)
Industrial Nanotech Inc.Nansulate PTThermal Spray
International Paint LLCInternationalEpoxy/Epoxy/Siloxane
Isolatek InternationalFendolite M-IIThermal Spray
ITW DevconWear Guard High ImpactEpoxy/Epoxy 100% Solids
ITW Polymers Coatings North AmericaAS-250Epoxy/Epoxy/Epoxy
Jotun Paints Inc.Resist 86 AV/Penguard Express/Hardtop Optima Inorganic Zinc/Epoxy/Siloxane
Kaufman Products, Inc.SurePoxy HiBildEpoxy 100% Solids (1 or 2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus UR-5Urethane/Urethane
Micor Company, Inc.Micorthane 6-23Urethane/Urethane
Northern Industries Inc.Hydro-Seal 75Epoxy Novolac (1 or 2 Coats)
Oak Ridge Chemical and EquipmentOak RidgePolyurea Pure (1, 2, or 3 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 5502/7502Polyurea Pure (1, 2, or 3 Coats)
Exterior Weathering, UV,and Mild ChemicalSteel
SPONSORED BY
Listings are alphabetized by company name.
Coating System Guide for Wastewater Plants, Municipal
iStockphoto
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmerCoatEpoxy (1-2 Coats)/Urethane
Premier Coating Systems Inc.PCS-#1100/PCS-#4300Other
Protective Floor and Linings Div. Milamar Ctgs.FiberCoat 1410CSEpoxy (1-2 Coats)/Urethane
Protecto Wrap CompanyProtecto Liner 1350Urethane/Urethane
Randolph ProductsRandogrip 75Other
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
Rhino Linings CorporationRhino SolarMaxUrethane/Urethane
Rodda Paint Co./Cloverdale PaintClovamastic/Armourshield XPEpoxy (1-2 Coats)/Urethane
Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenEpoxy 100% Solids (1 or 2 Coats)
Seacoat TechnologyFluoro - SlikEpoxy/Epoxy/Siloxane
Sherwin-WilliamsMacropoxy 646/Hi-Solids PolyurethaneEpoxy (1-2 Coats)/Urethane
Simpson Strong-TieSS-T FX-501 Elastomeric Other
Specialty Products, Inc. (SPI)Polyshield HT, Polyshield HT-100F UB, CAP 100Polyurea Pure (1, 2, or 3 Coats)
Stirling Lloyd Group Plc.IntegritankMethyl Methacrylate (2 Coats)
Stirling Lloyd Products Inc.IntegritankMethyl Methacrylate (2 Coats)
Termarust TechnologiesTermarust TR2000 HR CSA SeriesCalcium Sulphonate
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Urethane
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Dur 568Epoxy 100% Solids (1 or 2 Coats)
The Thortex GroupCorro-TechOther
3M Electrical Markets DivisionScotchkoteEpoxy (1-2 Coats)/Urethane
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
Tnemec Company, Inc.Hi-Build Epoxoline II/Endura-ShieldEpoxy (1-2 Coats)/Urethane
U.S. Coatings, LLCEpoxyGrip/UreGripEpoxy (1-2 Coats)/Urethane
VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU Zinc Rich/MCU/MCU
Watson Coatings, Inc.Aqua-ShieldAlkyd/Acrylic/Acrylic
Wilko Paint, Inc.WilkoOrganic Zinc/Epoxy/Urethane
ZRC WorldwideZRC-221 Cold Galvanizing CompoundZinc-Rich, Organic
Exterior Weathering, UVand Mild ChemicalConcrete
ABRI IndustriesMicroBond 87Inorganic Zinc/Epoxy/Urethane
AcryliCon Flooring SolutionsAcryliCon DecorOther
Advanced Chemical Technologies, Inc.Sil-ActSiloxane/Siloxane
Amercoat Canada/Nukote CanadaNukotePolyurea Pure (1, 2, or 3 Coats)
Andek CorporationEncapsall SuperUrethane/Urethane
Arizona Polymer Flooring Inc.Poly 100 VOCEpoxy (1-2 Coats)/Urethane
Arma CoatingsArma 6000 PolyureaPolyurea Pure (1, 2, or 3 Coats)
Atlas Minerals & Chemicals, Inc.RezkladEpoxy/Epoxy/Epoxy
Avilion Inc.PPGEpoxy (1-2 Coats)/Urethane
Blome International/Part of the HEMPEL GroupVersi-LineEpoxy 100% Solids (1 or 2 Coats)
Bowers IndustrialDuromarEpoxy/Epoxy 100% Solids
Carboline CompanyCarboguardEpoxy/Epoxy/Epoxy
ChemMasters, Inc.Duraguard 400 Series Methyl Methacrylate (2 Coats)
CIM IndustriesCIMUrethane Elastomeric (1 Coat)
Concrete Solutions Products by Rhino LiningsConcrete Solutions Epoxy 200Epoxy/Epoxy 100% Solids
Copolymer Protection SystemsChemProof PolymersEpoxy/Epoxy 100% Solids
Copps Industries, Inc.Armorgard 700UVEpoxy/Epoxy 100% Solids
Corotech High Performance CoatingsCorotechEpoxy (1-2 Coats)/Urethane
Corrocoat USA Inc.Polyglass ZipcoatUrethane/Urethane
Crossfield Products Corp.Dex-O-TexEpoxy (1-2 Coats)/Urethane
CSL Silicones Inc.Si-Coat 580Siloxane/Siloxane
Denso North AmericaDensoTape Wraps
Devoe HPC (International Paint LLC)Devoe High Performance CoatingsEpoxy (1-2 Coats)/Urethane
Diamond Vogel Paint CompanyVers-Acryl 200/Vers-Acryl 222Other
Duromar, Inc.HPL-1110/HPL-1110Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy/Epoxy 100% Solids
Euclid Chemical CompanyTammscoatAlkyd/Acrylic/Acrylic
FSC Coatings Inc.Bio-Safe Prime & Seal/MaxLifeAlkyd/Acrylic/Acrylic
Gemite Products Inc.Cem-Kote STOther
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.GCPEpoxy (1-2 Coats)/Urethane
Heresite Protective Coatings, LLCCSE-6200/UC-5500Epoxy (1-2 Coats)/Urethane
Wastewater Plants SPONSORED BY11
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.Indurethane 6600 PlusEpoxy (1-2 Coats)/Urethane
Industrial Coatings & SealantsPolycoatPolyurea Hybrid (1, 2, or 3 Coats)
Industrial Nanotech Inc.Nansulate GPThermal Spray
International CoatingsICO Guard CoatingEpoxy (1-2 Coats)/Urethane
International Paint LLCInternationalEpoxy (1-2 Coats)/Urethane
ITW DevconWear Guard High ImpactEpoxy/Epoxy 100% Solids
ITW Polymers Coatings North AmericaAS-250Epoxy/Epoxy/Epoxy
Jotun Paints Inc.Pen-O-Prep/Penguard Express/Hardtop II HSEpoxy (1-2 Coats)/Urethane
Kaufman Products, Inc.SurePoxy HIBildEpoxy 100% Solids (1 or 2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus UR-5Urethane/Urethane
Key Resin CompanyPlasti-ChemieMethyl Methacrylate (2 Coats)
Kryton International Inc.Krystol T1, Krystol T2Other
Micor Company, Inc.Micorthane 6-23Urethane/Urethane
National Polymers Inc.Private LabelEpoxy (1-2 Coats)/Urethane
Northern Industries Inc.NI-21Epoxy/Epoxy/Epoxy
Oak Ridge Chemical and EquipmentOak RidgePolyurea Pure (1, 2, or 3 Coats)
Peerless Industrial SystemsEpigenEpoxy/Epoxy 100% Solids
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 5502/7502Polyurea Pure (1, 2, or 3 Coats)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmerCoatEpoxy (1-2 Coats)/Urethane
Premier Coating Systems Inc.PCS-#1100/PCS-#4300Other
Protective Floor and Linings Div. Milamar Ctgs. PF&L 3300FSEpoxy/Epoxy/Epoxy
Protecto Wrap CompanyProtecto Liner 1350Urethane/Urethane
Randolph ProductsRandogrip 75Other
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
Rhino Linings CorporationRhino SolarMaxUrethane/Urethane
Rock-Tred CorporationChem-Thane P-100Polyurea Hybrid (1, 2, or 3 Coats)
Rodda Paint Co./Cloverdale PaintClovaMastic/Armourshield XPEpoxy (1-2 Coats)/Urethane
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenEpoxy 100% Solids (1 or 2 Coats)
Seacoat TechnologyFluoro - SlikEpoxy/Epoxy/Siloxane
Sherwin-WilliamsMacropoxy 646/Hi-Solids PolyurethaneEpoxy (1-2 Coats)/Urethane
Simpson Strong-TieSS-T FX-70-9 EpoxyEpoxy 100% Solids (1 or 2 Coats)
Soprema, Inc.Soprema Alsan TrafikUrethane/Urethane
Specialty Products, Inc. (SPI)Aquaseal Hi-Rise X3, Polyshield HT, AMP 100Polyurea Pure (1, 2, or 3 Coats)
Stirling Lloyd Group Plc.IntegritankMethyl Methacrylate (2 Coats)
Stirling Lloyd Products Inc.IntegritankMethyl Methacrylate (2 Coats)
Termarust TechnologiesTermaflex TX4000 SeriesOther
Thin Film Technology, Inc.Bio-Gard 288/561Epoxy (1-2 Coats)/Acrylic (1-2 Coats)
The Thortex GroupChemi-TechEpoxy 100% Solids (1 or 2 Coats)
3M Electrical Markets DivisionScotchkoteEpoxy (1-2 Coats)/Urethane
Tnemec Company, Inc.Hi-Build Epoxoline II/Endura-ShieldEpoxy (1-2 Coats)/Urethane
U.S. Coatings, LLCEpoxyGrip/UreGripEpoxy (1-2 Coats)/Urethane
VersaFlex IncorporatedFSS 45 DC-FPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU/MCU/MCU
Watson Coatings, Inc.ArmorexEpoxy (1-2 Coats)/Urethane
Wilko Paint, Inc.WilkoEpoxy (1-2 Coats)/Urethane
Interior Exposure EnvironmentSteel
ABRI IndustriesIronBond 111Inorganic Zinc/Epoxy/Urethane
Arma CoatingsArma 6000 PolyureaPolyurea Pure (1, 2, or 3 Coats)
Atlas Minerals & Chemicals, Inc.ChemprufEpoxy/Epoxy Flake Filled (2 Coats)
Avilion Inc.PPGEpoxy/Epoxy/Epoxy
Axalta Coating SystemsNap-GardFusion-Bonded Epoxy (1-2 Coats)
Blome International/Part of the HEMPEL GroupVersi-LineEpoxy 100% Solids (1 or 2 Coats)
Bowers IndustrialDuromarEpoxy 100% Solids (1 or 2 Coats)
CANUSA-CPSWrapid BondTape Wraps
Carboline CompanyCarboguardEpoxy/Epoxy/Epoxy
CCI Con-Tech of California, Inc.Hydro-PoxEpoxy/Epoxy 100% Solids
Ceilcote (International Paint LLC)CeilcoteEpoxy/Epoxy Flake Filled (2 Coats)
VersaFlex.com• 1-800-321-0906
Wastewater Plants SPONSORED BY12
Wastewater Plants SPONSORED BY
CIM IndustriesCIMUrethane Elastomeric (1 Coat)
Copolymer Protection SystemsChemProof PolymersEpoxy 100% Solids (1 or 2 Coats)
Corotech High Performance CoatingsCorotechEpoxy/Epoxy/Epoxy
Corrocoat USA Inc.Polyglass VEFVinyl Ester (3 Coats)
Denso North AmericaDensoTape Wraps
Devoe HPC (International Paint LLC)Devoe High Performance CoatingsEpoxy/Epoxy/Epoxy
Diamond Vogel Paint CompanyIron Prime 600/Vers-Acryl 222Alkyd/Acrylic/Acrylic
Duromar, Inc.HPL-1110/HPL-1110Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
FSC Coatings Inc.Rustop/SP-X Silicone Poly PlusEpoxy (1-2 Coats)/Urethane
Gemite Products Inc.Gem-Cote EP 100Epoxy 100% Solids (1 or 2 Coats)
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.GCPEpoxy/Epoxy/Epoxy
Heresite Protective Coatings, LLCHeresite CSE-6200Epoxy/Epoxy/Epoxy
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.Perma-Clean IIEpoxy/Epoxy/Epoxy
Industrial Nanotech Inc.Nansulate PTThermal Spray
International Paint LLCCeilcoteEpoxy Flake Filled/Epoxy Flake Filled
Isolatek InternationalFendolite M-IIThermal Spray
ITW DevconWear GuardEpoxy/Epoxy/Epoxy
ITW Polymers Coatings North AmericaAS-175Epoxy/Epoxy/Epoxy
Jotun Paints Inc.Penguard Express/Hardtop Flexi Epoxy (1-2 Coats)/Urethane
KCC Corrosion Control Co., Ltd.Techni-Plus AEP 20.2Epoxy/Epoxy 100% Solids
KEMA Coatings LimitedKemaEpoxy Novolac (1 or 2 Coats)
Micor Company, Inc.Micorox 1882Epoxy 100% Solids (1 or 2 Coats)
National Polymers Inc.Private LabelEpoxy (1-2 Coats)/Urethane
NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 Coats)
Oak Ridge Chemical and EquipmentOak RidgeUrethane/Urethane
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
PETROLEUM:IT’S NOT A SWEET PRODUCT
WE ARE HERE TO PROTECT YOUR TANKS.
FNEC 2515
1994 APPLICATION
2008 INSPECTION
o tesuntin cogntiaconegnirtt seg mnitaoco. Fknae tgarotl seuf
N®LL®OKOIH, T499n 1Il glitd sn3 a102
.tceotr petf. Asnoitacfiicepy svaS Nt Uh iguoroh, a tretas lraen yeetruaoo cd tess uay wxopc Ealovoae9 y1… gnortg sniol g
F
e h, tsraer 5 yehtonr aee hd tnuon foitcepsnh i
y vad nnuorgrednn ut aa!noitectorf ps ora
515EC 2N
noces a sr as ogninik lnar to• Fs ss aeciverd cns akcars clae• Sg inixee flrehs waerr aol faed• I
sdunm ieulortehe pr tof cdnexibility a flroirepuS
ed wfiidoc malovoy NxopEs a Cg inixelk Fnan TheWF
.gnitaot cnemniatnoy crad.sknae tgarotn sn iees s
.eussn is ag i
.yrt resistancelacimeh
edfilusyloh Ptied w:nrecnos a C
515EC 2N
epsspyysololyp. www www.tt wwwisiis v virr vog sniinttiaor cuod yno fio fint
o3 t300-77-9779-88l 8alall 8C
.moc.ce…noiiottiulluog s
yaddaoinidvorroP
mselborro Ptt Plucfifffii Do tss tnoituol Senvorro P Prgg PinNorth AmericaITW Polymers Coatings©2013
13
Wastewater Plants SPONSORED BY
Polycoat ProductsPolyeuro 5502Polyurea Pure (1, 2, or 3 Coats)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmercoatEpoxy (1-2 Coats)/Acrylic (1-2 Coats)
Premier Coating Systems Inc.PCS-#1100/PCS-#4300Other
Protective Floor and Linings Div. Milamar Ctgs. PF&L 1550HDEpoxy/Epoxy 100% Solids
Randolph ProductsRandogrip Navy GOther
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
REMA Corrosion Control, Inc.CorogardEpoxy 100% Solids (1 or 2 Coats)
Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)
Rodda Paint Co./Cloverdale PaintClovaMasticEpoxy/Epoxy/Epoxy
Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenEpoxy 100% Solids (1 or 2 Coats)
Seacoat TechnologyFluoro - SlikEpoxy/Epoxy/Siloxane
Sherwin-WilliamsMacropoxy 646Epoxy/Epoxy/Epoxy
Simpson Strong-TieSS-T FX-70-9 EpoxyEpoxy/Epoxy 100% Solids
Specialty Products, Inc. (SPI)Polyshield HT-100F UB, Polyshield HT, Hi-EPolyurea Pure (1, 2, or 3 Coats)
Stirling Lloyd Group Plc.PermareOther
Stirling Lloyd Products Inc.PermareOther
Termarust TechnologiesTermarust TR2100 HR CSA SeriesCalcium Sulphonate
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Dur 560Epoxy 100% Solids (1 or 2 Coats)
The Thortex GroupChemi-TechEpoxy 100% Solids (1 or 2 Coats)
Tnemec Company, Inc.Hi-Build Epoxoline IIEpoxy/Epoxy/Epoxy
U.S. Coatings, LLCEpoxyGripEpoxy/Epoxy/Epoxy
VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU Zinc Rich/MCU/MCU
Watson Coatings, Inc.Aqua-ShieldAlkyd/Acrylic/Acrylic
Wilko Paint, Inc.WilkoEpoxy/Epoxy/Epoxy
ZRC WorldwideZRC-221 Cold Galvanizing CompoundZinc-Rich, Organic
Interior ExposureEnvironmentConcrete Walls, Ceilings
ABRI IndustriesMicroBond 87Inorganic Zinc/Epoxy/Urethane
Advanced Chemical Technologies, Inc.Sil-ActSiloxane/Siloxane
Amercoat Canada/Nukote CanadaPolySpecEpoxy/Epoxy/Epoxy
Andek CorporationCocoonVinyl Ester (3 Coats)
Arma CoatingsArma 6000 UV Polyurea Pure (1, 2, or 3 Coats)
Atlas Minerals & Chemicals, Inc.RezkladEpoxy 100% Solids (1 or 2 Coats)
Avilion Inc.PPGEpoxy/Epoxy/Epoxy
Blome International/Part of the HEMPEL GroupVersi-LineEpoxy 100% Solids (1 or 2 Coats)
Bowers IndustrialDuromarEpoxy/Epoxy 100% Solids
Carboline CompanySanitileEpoxy/Epoxy 100% Solids
CCI Con-Tech of California, Inc.Hydro-PoxEpoxy 100% Solids (1 or 2 Coats)
Ceilcote (International Paint LLC)CeilcoteEpoxy/Epoxy Flake Filled (2 Coats)
ChemCo SystemsCCS HiChem ResistanceEpoxy 100% Solids (1 or 2 Coats)
ChemMasters, Inc.ColorcoatAlkyd/Acrylic/Acrylic
Copolymer Protection SystemsChemProof Polymers/PermaCoatEpoxy 100% Solids (1 or 2 Coats)
Corotech High Performance CoatingsCorotechEpoxy (1-2 Coats)/Acrylic (1-2 Coats)
Corrocoat USA Inc.Polyglass VEFVinyl Ester (3 Coats)
Crossfield Products Corp.Dex-O-TexEpoxy (1-2 Coats)/Urethane
Devoe HPC (International Paint LLC)Devoe High Performance CoatingsEpoxy/Epoxy/Epoxy
Diamond Vogel Paint CompanyVers-Acryl 200/Vers-Acryl 222Other
Duromar, Inc.HPL-1110/HPL-1110Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy/Epoxy 100% Solids
Euclid Chemical CompanyDuralkote 240Epoxy/Epoxy 100% Solids
FLOROCK, Crawford Labs, Inc.CR 250Urethane/Urethane
FSC Coatings Inc.Bio-Safe Prime & Seal/MaxLifeAlkyd/Acrylic/Acrylic
Gemite Products Inc.Tuff-Flex CAOther
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.GCPEpoxy/Epoxy/Epoxy
Heresite Protective Coatings, LLCHeresite VR-500Other
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
14
Wastewater Plants SPONSORED BY
Induron Coatings, Inc.Perma-Clean IIEpoxy/Epoxy/Epoxy
Industrial Nanotech Inc.Nansulate GPThermal Spray
International CoatingsICO GlazeEpoxy 100% Solids (1 or 2 Coats)
International Paint LLCCeilcoteEpoxy Flake Filled/Epoxy Flake Filled
Jotun Paints Inc.Penguard Express/Hardtop Flexi Epoxy (1-2 Coats)/Urethane
Kaufman Products, Inc.SurePoxy HiBildEpoxy 100% Solids (1 or 2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus AEP 20.2Epoxy/Epoxy 100% Solids
Key Resin CompanyKey 544/Key 467-HSEpoxy (1-2 Coats)/Urethane
Kryton International Inc.Krystol T1, Krystol T2Other
Micor Company, Inc.Micorox 1882Epoxy 100% Solids (1 or 2 Coats)
National Polymers Inc.Private LabelEpoxy/Epoxy 100% Solids
Northern Industries Inc.NI-21Epoxy/Epoxy 100% Solids
NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 Coats)
Oak Ridge Chemical and EquipmentOak RidgePolyurea Pure (1, 2, or 3 Coats)
Peerless Industrial SystemsEpigenEpoxy/Epoxy 100% Solids
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 5502Polyurea Pure (1, 2, or 3 Coats)
Polymax/Milamar Coatings LLCPolyMax 250V-550Epoxy (1-2 Coats)/Urethane
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmerCoatEpoxy/Epoxy/Epoxy
Protective Floor and Linings Div. Milamar Ctgs.PF&L FiberCoatEpoxy/Epoxy 100% Solids
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
REMA Corrosion Control, Inc.CorogardEpoxy 100% Solids (1 or 2 Coats)
Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)
Rock-Tred CorporationNovo-PoxiEpoxy/Epoxy Novolac (2 Coats)
Rodda Paint Co./Cloverdale PaintClovamasticEpoxy (1-2 Coats)/Acrylic (1-2 Coats)
Sauereisen, Inc.SauereisenEpoxy 100% Solids (1 or 2 Coats)
SaverSystems/DefyMasonrySaverSiloxane/Siloxane
Sherwin-WilliamsWB Tile CladEpoxy/Epoxy/Epoxy
Simpson Strong-TieSS-T FX-207 Slurry SealOther
Specialty Products, Inc. (SPI)Aquaseal Hi-Rise X3, Polyshield HTPolyurea Pure (1, 2, or 3 Coats)
SpeedCove Inc. DBA Solid Rock EnterprisesSpeedCove Precast Cove Base SystemsOther
Termarust TechnologiesTermaflex TX4000Other
Thin Film Technology, Inc.Bio-Gard 258/251Epoxy 100% Solids (1 or 2 Coats)
The Thortex GroupChemi-TechEpoxy 100% Solids (1 or 2 Coats)
Tnemec Company, Inc.Hi-Build Epoxoline IIEpoxy/Epoxy/Epoxy
U.S. Coatings, LLCEpoxyGripEpoxy/Epoxy/Epoxy
VersaFlex IncorporatedFSS 45 DC-FPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU/MCU/MCU
Watson Coatings, Inc.Armorex/Aqua-ShieldEpoxy (1-2 Coats)/Acrylic (1-2 Coats)
Wilko Paint, Inc.WilkoEpoxy/Epoxy/Epoxy
Interior ExposureEnvironmentConcrete FloorsABRI IndustriesMicroBond 87Inorganic Zinc/Epoxy/Urethane
AcryliCon Flooring SolutionsAcryliCon DecorOther
Advanced Chemical Technologies, Inc.SIL-ACTSiloxane/Siloxane
Amercoat Canada/Nukote CanadaPolySpecEpoxy 100% Solids (1 or 2 Coats)
Andek CorporationPolafloor EpoxyEpoxy/Epoxy/Epoxy
ARC Composites, Div. of A.W. ChestertonARC CS2Epoxy 100% Solids (1 or 2 Coats)
Arizona Polymer Flooring Inc.Epoxy Novolac 900Epoxy/Epoxy Novolac (2 Coats)
Arma CoatingsArma 6000Polyurea Hybrid (1, 2, or 3 Coats)
Atlas Minerals & Chemicals, Inc.RezkladEpoxy 100% Solids (1 or 2 Coats)
Avilion Inc.PPGEpoxy/Epoxy/Epoxy
Blome International/Part of the HEMPEL GroupVersi-LineEpoxy/Epoxy Novolac (2 Coats)
Bowers IndustrialDuromarOrganic Zinc/Epoxy 100% Solids
Carboline CompanySanitileEpoxy/Epoxy 100% Solids
CCI Con-Tech of California, Inc.Hydro-PoxEpoxy/Epoxy 100% Solids
Ceilcote (International Paint LLC)CeilcoteEpoxy 100% Solids (1 or 2 Coats)
ChemCo SystemsCCS HiChem ResistanceEpoxy 100% Solids (1 or 2 Coats)
ChemMasters, Inc.Duraguard 100 SeriesEpoxy/Epoxy/Epoxy
CIM IndustriesCIMUrethane Elastomeric (1 Coat)
Concrete Solutions Products by Rhino LiningsConcrete Solutions Epoxy 200Epoxy/Epoxy 100% Solids
Copolymer Protection SystemsChemProof Polymers/PermaTecEpoxy/Epoxy 100% Solids
Copps Industries, Inc.Armorgard 500Epoxy/Epoxy 100% Solids
15
Corotech High Performance CoatingsCorotechEpoxy/Epoxy/Epoxy
Corrocoat USA Inc.Corrothane AP1Vinyl Ester (3 Coats)
Crossfield Products Corp.Dex-O-TexEpoxy/Epoxy/Epoxy
Devoe HPC (International Paint LLC)Devoe High Performance CoatingsEpoxy/Epoxy/Epoxy
Diamond Vogel Paint CompanyVers-E-Poxy 111Epoxy/Epoxy/Epoxy
Duromar, Inc.HydroFlor Sealer, HydroFlorEpoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy/Epoxy 100% Solids
Euclid Chemical CompanyDuraltexEpoxy 100% Solids (1 or 2 Coats)
FSC Coatings Inc.AWR Super SealerMethyl Methacrylate (2 Coats)
Gemite Products Inc.Gem-Crete TWM PlusOther
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.GCPEpoxy/Epoxy/Epoxy
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.Perma-Tuff SlEpoxy/Epoxy 100% Solids
Industrial Coatings & SealantsKemiko, BD Classic, Miracote, Arizona PolymerEpoxy (1-2 Coats)/Urethane
International CoatingsICO Guard CoatingEpoxy 100% Solids (1 or 2 Coats)
International Paint LLCCeilcoteEpoxy/Vinyl Ester/Vinyl Ester
ITW DevconEpoxy CoatEpoxy/Epoxy 100% Solids
ITW Polymers Coatings North AmericaAS-175Epoxy/Epoxy/Epoxy
Jotun Paints Inc.Penguard Express/Hardtop FlexiEpoxy (1-2 Coats)/Urethane
Kaufman Products, Inc.K Pro CRSEpoxy 100% Solids (1 or 2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus EN 25.3Epoxy/Epoxy Novolac (2 Coats)
Key Resin CompanyKey 630 Key 633Epoxy/Epoxy Novolac (2 Coats)
Kryton International IncKrystol T1, Krystol T2Other
Micor Company, Inc.Micorox 1882Epoxy 100% Solids (1 or 2 Coats)
National Polymers Inc.Private LabelEpoxy Novolac (1 or 2 Coats)
Northern Industries Inc.Hydro-Seal 75Epoxy Novolac (1 or 2 Coats)
Nox-Crete Products GroupDauercast SQ & DQ Epoxy Broadcast SystemEpoxy 100% Solids (1 or 2 Coats)
NSP Specialty ProductsNSP-122 Industrial Floor CoatingEpoxy 100% Solids (1 or 2 Coats)
Oak Ridge Chemical and EquipmentOak RidgeUrethane Elastomeric (1 Coat)
Peerless Industrial SystemsEpigenEpoxy/Epoxy 100% Solids
Plexi-Chemie, Inc.PlexiCladEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 5502Polyurea Pure (1, 2, or 3 Coats)
Polymax/Milamar Coatings LLCPolyMax SLBEpoxy/Epoxy 100% Solids
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmerCoatEpoxy 100% Solids (1 or 2 Coats)
Protective Floor and Linings Div. Milamar Ctgs.PF&L 1000CSEpoxy/Epoxy 100% Solids
Randolph ProductsRandogrip Navy GOther
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
REMA Corrosion Control, Inc.Corofloor, CoroflakeEpoxy/Epoxy Novolac (2 Coats)
Rhino Linings CorporationFastFloorEpoxy (1-2 Coats)/Urethane
Rock-Tred CorporationNovo-PoxiEpoxy/Epoxy Novolac (2 Coats)
Rodda Paint Co./Cloverdale PaintClovaMasticEpoxy/Epoxy/Epoxy
Sauereisen, Inc.SauereisenEpoxy 100% Solids (1 or 2 Coats)
SaverSystems/DefyMasonrySaverSiloxane/Siloxane
Sherwin-WilliamsMacropoxy 646Epoxy/Epoxy/Epoxy
Simpson Strong-TieSS-T FX-70 Floor CoatingEpoxy/Epoxy 100% Solids
Specialty Products, Inc. (SPI)Aquaseal Hi-Rise X3, Polyshield HTPolyurea Pure (1, 2, or 3 Coats)
SpeedCove Inc. DBA Solid Rock EnterprisesSpeedCove Precast Cove Base SystemsOther
Stirling Lloyd Group Plc.ArmafloorMethyl Methacrylate (2 Coats)
Stirling Lloyd Products Inc.ArmafloorMethyl Methacrylate (2 Coats)
Termarust TechnologiesTermapoxy TE2300 SeriesEpoxy 100% Solids (1 or 2 Coats)
Thin Film Technology, Inc.Bio-Gard 258/251Epoxy 100% Solids (1 or 2 Coats)
The Thortex GroupChemi-TechEpoxy 100% Solids (1 or 2 Coats)
Tnemec Company, Inc.Epoxoprime/Tneme-GlazeEpoxy/Epoxy 100% Solids
U.S. Coatings, LLCEpoxyGripEpoxy/Epoxy/Epoxy
VersaFlex IncorporatedAliphatic ClearCoatPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU/MCU/MCU
WestcoatWestcoatEpoxy/Epoxy 100% Solids
Wilko Paint, Inc.WilkoEpoxy/Epoxy 100% Solids
Immersion Wastewater CollectionPrimary & Secondary TreatmentSteel
Amercoat Canada/Nukote CanadaNukotePolyurea Hybrid (1, 2, or 3 Coats)
ARC Composites, Div. of A.W. ChestertonARC S1HB, ARC S1Epoxy 100% Solids (1 or 2 Coats)
Arma CoatingsArma 901 50DPolyurea Pure (1, 2, or 3 Coats)
Wastewater Plants SPONSORED BY16
Wastewater Plants SPONSORED BY
Atlas Minerals & Chemicals, Inc.Anchor-LokSheet Lining, Thermoplastic
Avilion Inc.EnvirolineEpoxy 100% Solids (1 or 2 Coats)
Axalta Coating SystemsNap-GardFusion-Bonded Epoxy (1-2 Coats)
Blome International/Part of the HEMPEL GroupVersi-LineEpoxy Novolac (1 or 2 Coats)
Bowers IndustrialQuestPolyurea Hybrid (1, 2, or 3 Coats)
Carboline CompanyReactamineUrethane Elastomeric (1 Coat)
CCI Con-Tech of California, Inc.Hydro-PoxEpoxy/Epoxy 100% Solids
Ceilcote (International Paint LLC)CeilcoteEpoxy/Epoxy Flake Filled (2 Coats)
CIM IndustriesCIMUrethane Elastomeric (1 Coat)
Copolymer Protection SystemsChemProof PolymersEpoxy/Epoxy 100% Solids
Corotech High Performance CoatingsCorotechEpoxy Coal Tar/Epoxy Coal Tar
Corrocoat USA Inc.Polyglass VEFVinyl Ester (3 Coats)
Denso North AmericaDensoTape Wraps
Devoe HPC (International Paint LLC)Devoe High Performance CoatingsEpoxy/Epoxy/Epoxy
Diamond Vogel Paint CompanyMult-E-Poxy 180Epoxy/Epoxy/Epoxy
Duromar, Inc.HPL-2510/HPL-2510Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
Gemite Products Inc.Fibre-PrimeOther
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Goodwest Linings and CoatingsBlair, Polymeric, Rubber SourceSheet Lining, Rubber
Gulf Coast Paint Mfg., Inc.GCPEpoxy/Epoxy/Epoxy
Heresite Protective Coatings, LLCHeresite CSE-6200Epoxy/Epoxy/Epoxy
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.PermaSafe 100 Ceramic EpoxyEpoxy 100% Solids (1 or 2 Coats)
International Paint LLCCeilcoteEpoxy Flake Filled/Epoxy Flake Filled
ITW DevconWear Guard High ImpactEpoxy/Epoxy 100% Solids
Jotun Paints Inc.Marathon/MarathonEpoxy Flake Filled/Epoxy Flake Filled
KCC Corrosion Control Co., Ltd.Techni-Plus VE 62Vinyl Ester (3 Coats)
Key Resin CompanyKey Vinyl EsterVinyl Ester (3 Coats)
Madison Chemical IndustriesCorroCote II PWPolyurea Hybrid (1, 2, or 3 Coats)
NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 5502Polyurea Pure (1, 2, or 3 Coats)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmerCoatEpoxy/Epoxy Phenolic/Epoxy Phenolic
Protective Floor and Linings Div. Milamar Ctgs.PF&L FiberCoat CREpoxy/Epoxy Novolac (2 Coats)
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
REMA Corrosion Control, Inc.CoroflakeEpoxy/Epoxy Flake Filled (2 Coats)
Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)
Rodda Paint Co./Cloverdale PaintClovaLineEpoxy/Epoxy Novolac (2 Coats)
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenUrethane/Urethane
Seacoat TechnologyNova-SilSiloxane/Siloxane
Sherwin-WilliamsSher-Glass FFEpoxy Flake Filled/Epoxy Flake Filled
Simpson Strong-TieSS-T FX-70-9 EpoxyEpoxy 100% Solids (1 or 2 Coats)
Specialty Products, Inc. (SPI)Ultra Bond-100, Polyshield HT-100F, Hi-EPolyurea Pure (1, 2, or 3 Coats)
SpectraShield Liner SystemsSpectraShieldPolyurea Hybrid (1, 2, or 3 Coats)
Stirling Lloyd Group Plc.IntegritankMethyl Methacrylate (2 Coats)
Stirling Lloyd Products Inc.IntegritankMethyl Methacrylate (2 Coats)
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Dur 560Epoxy 100% Solids (1 or 2 Coats)
The Thortex GroupChemi-TechEpoxy 100% Solids (1 or 2 Coats)
3M Electrical Markets DivisionScotchkoteEpoxy (1-2 Coats)/Urethane
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
Tnemec Company, Inc.Hi-Build Epoxoline II/Perma-GlazeEpoxy/Epoxy 100% Solids
U.S. Coatings, LLCGripLineEpoxy 100% Solids (1 or 2 Coats)
VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU Zinc Rich/MCU/MCU
Wilko Paint, Inc.WilkoshieldVinyl Ester (3 Coats)
ZRC WorldwideZRC Zero-VOC Galvanizing CompoundZinc-Rich, Inorganic
17
Wastewater Plants SPONSORED BY
ImmersionWastewater CollectionPrimary & Secondary Treatment Concrete
Advanced Chemical Technologies, Inc.Sil-ActSiloxane/Siloxane
Amercoat Canada/Nukote CanadaNukote XT+Polyurea Pure (1, 2, or 3 Coats)
Andek CorporationEncapsall SuperUrethane/Urethane
ARC Composites, Div. of A.W. ChestertonARC 791Epoxy/Epoxy 100% Solids
Arma CoatingsArma 901 50D PolyureaPolyurea Pure (1, 2, or 3 Coats)
Atlas Minerals & Chemicals, Inc.RezkladEpoxy/Epoxy 100% Solids
Avilion Inc.EnvirolineEpoxy Novolac (1 or 2 Coats)
Blome International/Part of the HEMPEL GroupVersi-LineEpoxy/Epoxy Novolac (2 Coats)
Bowers IndustrialQuestPolyurea Hybrid (1, 2, or 3 Coats)
Carboline CompanyReactamineUrethane Elastomeric (1 Coat)
CCI Con-Tech of California, Inc.Hydro-PoxEpoxy/Epoxy 100% Solids
Ceilcote (International Paint LLC)CeilcoteEpoxy/Epoxy Flake Filled (2 Coats)
ChemCo SystemsCCS HiChem ResistanceEpoxy/Epoxy 100% Solids
CIM IndustriesCIMUrethane Elastomeric (1 Coat)
ConShield TechnologiesCor+GardEpoxy/Epoxy 100% Solids
Copolymer Protection SystemsChemProof Polymers/PermaTecEpoxy/Epoxy 100% Solids
Copps Industries, Inc.Armorgard 500Epoxy/Epoxy 100% Solids
Corotech High Performance CoatingsCorotechEpoxy Coal Tar/Epoxy Coal Tar
Corrocoat USA Inc.Polyglass VEFVinyl Ester (3 Coats)
Devoe HPC (International Paint LLC)Devoe High Performance CoatingsEpoxy/Epoxy/Epoxy
Diamond Vogel Paint CompanyMult-E-Poxy 180Epoxy/Epoxy/Epoxy
Duromar, Inc.HPL-2510/HPL-2510Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy/Epoxy 100% Solids
Euclid Chemical CompanyDuralkote 500Epoxy/Epoxy 100% Solids
Gemite Products Inc.Cem-Kote Flex CROther
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.GCPEpoxy/Epoxy/Epoxy
Heresite Protective Coatings, LLCHeresite CSE-6200Epoxy/Epoxy/Epoxy
18
Wastewater Plants SPONSORED BY
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.PermaSafe 100 Ceramic EpoxyEpoxy 100% Solids (1 or 2 Coats)
International CoatingsICO Guard GFEpoxy Flake Filled/Epoxy Flake Filled
International Paint LLCCeilcoteEpoxy Flake Filled/Epoxy Flake Filled
ITW DevconDeFense BlokEpoxy/Epoxy/Epoxy
Jotun Paints Inc.Pen-O-Prep/Marathon/MarathonEpoxy Flake Filled/Epoxy Flake Filled
KCC Corrosion Control Co., Ltd.Techni-Plus VE 62Vinyl Ester (3 Coats)
Key Resin CompanyKey 630/Key 633Epoxy/Epoxy Novolac (2 Coats)
Kryton International Inc.Krystol T1, Krystol T2Other
Madison Chemical IndustriesMG 201/CorroCote II PWEpoxy (1-2 Coats)/Urethane
Micor Company, Inc.Micorline 320Epoxy/Epoxy 100% Solids
National Polymers Inc.Private LabelEpoxy/Epoxy Novolac (2 Coats)
Northern Industries Inc.Hydro-Seal 75Epoxy Novolac (1 or 2 Coats)
NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Plexi-Chemie, Inc.GlasLok 270 Fiberglass Reinforced SystemEpoxy/Epoxy 100% Solids
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 5502Polyurea Pure (1, 2, or 3 Coats)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmercoatEpoxy/Epoxy/Epoxy
Protective Floor and Linings Div. Milamar Ctgs. PF&L 2300LSEpoxy/Epoxy/Epoxy
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
REMA Corrosion Control, Inc.Coroflake, Coroflake MEpoxy/Epoxy/Epoxy
Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)
Sauereisen, Inc.SauereisenUrethane/Urethane
SeaCoat TechnologyNova-SilSiloxane/Siloxane
Sherwin-WilliamsSherFlex Elastomeric PolyurethaneUrethane Elastomeric (1 Coat)
Simpson Strong-TieSS-T FX-70-9 EpoxyEpoxy 100% Solids (1 or 2 Coats)
Specialty Products, Inc. (SPI)Aquaseal Hi-Rise X3, Ultra Bond, Polyshield Polyurea Pure (1, 2, or 3 Coats)
SpectraShield Liner SystemsSpectraShieldPolyurea Hybrid (1, 2, or 3 Coats)
Stirling Lloyd Group Plc.IntegritankMethyl Methacrylate (2 Coats)
Stirling Lloyd Products Inc.IntegritankMethyl Methacrylate (2 Coats)
Thin Film Technology, Inc.Bio-Dur 560Epoxy 100% Solids (1 or 2 Coats)
The Thortex GroupChemi-TechEpoxy 100% Solids (1 or 2 Coats)
Tnemec Company, Inc.Hi-Build Epoxoline II/Perma-Shield/Perma-GlazeEpoxy/Epoxy 100% Solids
U.S. Coatings, LLCGripLineEpoxy/Epoxy 100% Solids
VersaFlex IncorporatedFSS 45 DCPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU Coal Tar/MCU Coal Tar/MCU Coal Tar
Wilko Paint, Inc.WilkoshieldVinyl Ester (3 Coats)
ImmersionTertiary TreatmentSteel
Amercoat Canada/Nukote CanadaPolySpecEpoxy/Epoxy Novolac (2 Coats)
ARC Composites, Div. of A.W. ChestertonARC S2/S1HBEpoxy 100% Solids (1 or 2 Coats)
Arma CoatingsArma 90AS PolyureaPolyurea Pure (1, 2, or 3 Coats)
Atlas Minerals & Chemicals, Inc.Anchor-LokSheet Lining, Thermoplastic
Avilion Inc.PPGEpoxy/Epoxy/Epoxy
Axalta Coating SystemsNap-GardFusion-Bonded Epoxy (1-2 Coats)
Blome International/Part of the HEMPEL GroupVersi-LineEpoxy/Epoxy Novolac (2 Coats)
Bowers IndustrialDuromarEpoxy/Epoxy 100% Solids
Carboline CompanyPlasiteEpoxy 100% Solids (1 or 2 Coats)
CCI Con-Tech of California, Inc.Hydro-PoxEpoxy/Epoxy 100% Solids
Ceilcote (International Paint LLC)CeilcoteEpoxy/Epoxy Flake Filled (2 Coats)
CIM IndustriesCIMUrethane Elastomeric (1 Coat)
Cloverdale Paint Inc.ClovaLineEpoxy 100% Solids (1 or 2 Coats)
Corotech High Performance CoatingsCorotechEpoxy/Epoxy/Epoxy
Corrocoat USA Inc.Polyglass VEFVinyl Ester (3 Coats)
Devoe HPC (International Paint LLC)Devoe High Performance CoatingsEpoxy/Epoxy/Epoxy
Diamond Vogel Paint CompanyCerami-TarEpoxy Coal Tar High Build (1 or 2 Coats)
Duromar, Inc.HPL-2510/HPL-2510Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
Gemite Products Inc.Gem-Cote EP 100Epoxy 100% Solids (1 or 2 Coats)
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy Flake Filled (2 Coats)
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.PermaSafe 100 Ceramic EpoxyEpoxy 100% Solids (1 or 2 Coats)
International Paint LLCCeilcoteEpoxy Flake Filled/Epoxy Flake Filled
19
Wastewater Plants SPONSORED BY
ITW DevconBrushable CeramicEpoxy/Epoxy/Epoxy
Jotun Paints Inc.Marathon/Marathon Epoxy Flake Filled/Epoxy Flake Filled
KCC Corrosion Control Co., Ltd.Techni-Plus VE 62Vinyl Ester (3 Coats)
Key Resin CompanyKey 630/Key 633Epoxy/Epoxy Novolac (2 Coats)
NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmercoatEpoxy Phenolic (3 Coats)
Protective Floor and Linings Div. Milamar Ctgs. PF&L 1550HDEpoxy/Epoxy 100% Solids
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
REMA Corrosion Control, Inc.CorogardEpoxy 100% Solids (1 or 2 Coats)
Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)
Rust Bullet, LLCRust BulletOther
Sauereisen, Inc.SauereisenUrethane/Urethane
Seacoat TechnologyFluoro-SlikSiloxane/Siloxane
Sherwin-WilliamsDura-Plate 235 PWEpoxy/Epoxy/Epoxy
Specialty Products, Inc. (SPI)Ultra Bond-100, Polyshield Hi-E, HTPolyurea Pure (1, 2, or 3 Coats)
SpectraShield Liner SystemsSpectraShieldPolyurea Hybrid (1, 2, or 3 Coats)
Stirling Lloyd Group Plc.IntegritankMethyl Methacrylate (2 Coats)
Stirling Lloyd Products Inc.IntegritankMethyl Methacrylate (2 Coats)
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Dur 560Epoxy 100% Solids (1 or 2 Coats)
The Thortex GroupChemi-TechEpoxy 100% Solids (1 or 2 Coats)
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
Tnemec Company, Inc.Hi-Build Epoxoline II/Perma-Shield MCUEpoxy/MCU/MCU
U.S. Coatings, LLCGripLineEpoxy 100% Solids (1 or 2 Coats)
VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU Coal Tar/MCU Coal Tar/MCU Coal Tar
Wilko Paint, Inc.WilkoshieldVinyl Ester (3 Coats)
ImmersionTertiary TreatmentConcrete
Advanced Chemical Technologies, Inc.SIL-ACTSiloxane/Siloxane
Amercoat Canada/Nukote CanadaNukote XT+Polyurea Pure (1, 2, or 3 Coats)
Andek CorporationPolasealSiloxane/Siloxane
ARC Composites, Div. of A.W. ChestertonARC CS2/S1HBEpoxy 100% Solids (1 or 2 Coats)
Arma CoatingsArma 901 55D PolyureaPolyurea Pure (1, 2, or 3 Coats)
Atlas Minerals & Chemicals, Inc.RezkladEpoxy/Epoxy 100% Solids
Avilion Inc.PPGEpoxy/Epoxy/Epoxy
Blome International/Part of the HEMPEL GroupVersi-LineEpoxy/Epoxy Novolac (2 Coats)
Bowers IndustrialDuromarEpoxy/Epoxy 100% Solids
Carboline CompanyReactamineUrethane Elastomeric (1 Coat)
CCI Con-Tech of California, Inc.Hydro-PoxEpoxy/Epoxy 100% Solids
Ceilcote (International Paint LLC)CeilcoteEpoxy/Epoxy Flake Filled (2 Coats)
ChemCo SystemsCCS HiChem ResistanceEpoxy/Epoxy 100% Solids
CIM IndustriesCIMUrethane Elastomeric (1 Coat)
Cloverdale Paint Inc.ClovaLineEpoxy/Epoxy 100% Solids
Copolymer Protection SystemsChemProof Polymers/PermaTecEpoxy/Epoxy 100% Solids
Copps Industries, Inc.Armorgard 500Epoxy/Epoxy 100% Solids
Corotech High Performance CoatingsCorotechEpoxy/Epoxy/Epoxy
Corrocoat USA Inc.Polyglass VEFVinyl Ester (3 Coats)
Devoe HPC (International Paint LLC)Devoe High Performance CoatingsEpoxy/Epoxy/Epoxy
Diamond Vogel Paint CompanyCerami-TarEpoxy Coal Tar High Build (1 or 2 Coats)
Duromar, Inc.HPL-1301, DF-4301Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy/Epoxy 100% Solids
Euclid Chemical CompanyDuralkote 500Epoxy/Epoxy 100% Solids
Gemite Products Inc.Corro-Chem 100Other
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly CreteEpoxy/Epoxy Flake Filled (2 Coats)
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.PermaSafe 100 Ceramic EpoxyEpoxy 100% Solids (1 or 2 Coats)
International Paint LLCCeilcoteEpoxy Flake Filled/Epoxy Flake Filled
ITW DevconWear GuardEpoxy/Epoxy/Epoxy
Jotun Paints Inc.Pen-O-Prep/MarathonEpoxy/Epoxy Flake Filled (2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus VE 62Vinyl Ester (3 Coats)
Key Resin CompanyKey 630/Key 633Epoxy/Epoxy Novolac (2 Coats)
Kryton International Inc.Krystol T1, Krystol T2Other
Micor Company, Inc.Micorline 320Epoxy/Epoxy 100% Solids
20
Wastewater Plants SPONSORED BY
National Polymers Inc.Private LabelEpoxy Novolac (1 or 2 Coats)
Northern Industries Inc.Hydro-Seal 75Epoxy Novolac (1 or 2 Coats)
NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmercoatEpoxy Phenolic (3 Coats)
Protective Floor and Linings Div. Milamar Ctgs.PF&L 2300LSEpoxy/Epoxy/Epoxy
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
REMA Corrosion Control, Inc.Coroflake M, Corofloor,Epoxy 100% Solids (1 or 2 Coats)
Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)
Sauereisen, Inc.SauereisenUrethane/Urethane
Seacoat TechnologyNova-SilSiloxane/Siloxane
Sherwin-WilliamsSherFlex Elastomeric PolyurethaneUrethane Elastomeric (1 Coat)
Specialty Products, Inc. (SPI)Aquaseal Hi-Rise X3, Ultra Bond, Polyshield Polyurea Pure (1, 2, or 3 Coats)
SpectraShield Liner SystemsSpectraShieldPolyurea Hybrid (1, 2, or 3 Coats)
Stirling Lloyd Group Plc.IntegritankMethyl Methacrylate (2 Coats)
Stirling Lloyd Products Inc.IntegritankMethyl Methacrylate (2 Coats)
The Thortex GroupChemi-TechEpoxy 100% Solids (1 or 2 Coats)
Thin Film Technology, Inc.Bio-Dur 560Epoxy 100% Solids (1 or 2 Coats)
Tnemec Company, Inc.Hi-Build Epoxoline II/Perma-Shield MCUEpoxy/MCU/MCU
U.S. Coatings, LLCGripLineEpoxy/Epoxy 100% Solids
VersaFlex IncorporatedFSS 45 DC SeriesPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU Coal Tar/MCU Coal Tar/MCU Coal Tar
Wilko Paint, Inc.WilkoshieldVinyl Ester (3 Coats)
Secondary ContainmentConcrete
ABRI IndustriesMicroBond 87Inorganic Zinc/Epoxy/Urethane
Advanced Chemical Technologies, Inc.SIL-ACTSiloxane/Siloxane
Amercoat Canada/Nukote CanadaNukotePolyurea Pure (1, 2, or 3 Coats)
Andek CorporationPolafloor PURUrethane/Urethane
ARC Composites, Div. of A.W. ChestertonARC 791/988Epoxy 100% Solids (1 or 2 Coats)
Arizona Polymer Flooring Inc.Epoxy Novolac 900Epoxy/Epoxy Novolac (2 Coats)
Arma CoatingsArma 90AS PolyureaPolyurea Pure (1, 2, or 3 Coats)
Atlas Minerals & Chemicals, Inc.ChemprufEpoxy Flake Filled/Epoxy Flake Filled
Avilion Inc.EnvirolineEpoxy 100% Solids (1 or 2 Coats)
Blome International/Part of the HEMPEL GroupVersi-LineEpoxy/Epoxy Novolac (2 Coats)
Bowers IndustrialQuestPolyurea Hybrid (1, 2, or 3 Coats)
Carboline CompanySemstoneEpoxy/Epoxy 100% Solids
CCI Con-Tech of California, Inc.Hydro-PoxEpoxy/Epoxy 100% Solids
Ceilcote (International Paint LLC)CeilcoteEpoxy/Epoxy Flake Filled (2 Coats)
ChemCo SystemsCCS HiChem ResistanceEpoxy 100% Solids (1 or 2 Coats)
ChemMasters, Inc.Duraguard 500 SeriesVinyl Ester (3 Coats)
CIM IndustriesCIMUrethane Elastomeric (1 Coat)
Cloverdale Paint Inc.ClovaLineEpoxy 100% Solids (1 or 2 Coats)
Concrete Solutions Products by Rhino LiningsConcrete Solutions Epoxy 200Epoxy/Epoxy 100% Solids
Copolymer Protection SystemsChemProof Polymers/PermaTecEpoxy/Epoxy 100% Solids
Copps Industries, Inc.Armorgard 500Epoxy/Epoxy 100% Solids
Corrocoat USA Inc.Plasmet ZEEpoxy/Epoxy Flake Filled (2 Coats)
Crossfield Products Corp.Dex-O-TexEpoxy Novolac (1 or 2 Coats)
Diamond Vogel Paint CompanyMult-E-Poxy 180/Multi-Thane 330 or 340Epoxy (1-2 Coats)/Urethane
Duromar, Inc.HPL-1301, DF-4301Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy/Epoxy Novolac (2 Coats)
Euclid Chemical CompanyDuralkote 240Epoxy/Epoxy 100% Solids
Fabick Protective CoatingsFabickPolyurea Pure (1, 2, or 3 Coats)
FSC Coatings Inc.Rustop MetallicUrethane/Urethane
Gemite Products Inc.Cem-Kote Flex CROther
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Goodwest Linings and CoatingsUtilithane, Endura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly CreteEpoxy/Epoxy Flake Filled (2 Coats)
Heresite Protective Coatings, LLCHeresite CSE-6200Epoxy/Epoxy/Epoxy
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.PermaSafe 100 Ceramic EpoxyEpoxy/Epoxy 100% Solids
Industrial Coatings & SealantsBD Classic, Miracote, Arizona PolymerEpoxy/Epoxy Novolac (2 Coats)
Industrial Nanotech Inc.Nansulate GPThermal Spray
International CoatingsICO Super GuardEpoxy Novolac (1 or 2 Coats)
International Paint LLCInternationalEpoxy/Epoxy Novolac (2 Coats)
21
Wastewater Plants SPONSORED BY
Jotun Paints Inc.Pen-O-Prep/Penguard Express/Hardtop II HSEpoxy (1-2 Coats)/Urethane
KCC Corrosion Control Co., Ltd.Elasti-Liner 1Other
KEMA Coatings LimitedKemaPolyurea Hybrid (1, 2, or 3 Coats)
Key Resin CompanyKey Vinyl EsterVinyl Ester (3 Coats)
Kryton International IncKrystol T1, Krystol T2Other
Micor Company, Inc.Micorline 320Epoxy/Epoxy 100% Solids
National Polymers Inc.Private LabelEpoxy/Epoxy Novolac (2 Coats)
Northern Industries Inc.NI-Dura 1054 Novolac EpoxyEpoxy Novolac (1 or 2 Coats)
NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigen chemproofEpoxy/Epoxy Novolac (2 Coats)
Plexi-Chemie, Inc.PlexiCoat FEpoxy/Epoxy 100% Solids
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 5502Polyurea Pure (1, 2, or 3 Coats)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmerCoatEpoxy Phenolic (3 Coats)
Protective Floor and Linings Div. Milamar Ctgs.PF&L 2300LSEpoxy/Epoxy/Epoxy
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
REMA Corrosion Control, Inc.Coroflake M, CorofloorEpoxy 100% Solids (1 or 2 Coats)
Rhino Linings CorporationRhino HybridPolyurea Hybrid (1, 2, or 3 Coats)
Rock-Tred CorporationNovo-PoxiEpoxy/Epoxy Novolac (2 Coats)
Rodda Paint Co./Cloverdale PaintClovaMasticEpoxy/Epoxy/Epoxy
Sauereisen, Inc.SauereisenUrethane/Urethane
Seacoat TechnologyNova-SilSiloxane/Siloxane
Sherwin-WilliamsCorobond VE/Cor-Cote VEN/Cor-Cote VENVinyl Ester (3 Coats)
Simpson Strong-TieSS-T FX-3110SW Chem-Resistant NovolacEpoxy Novolac (1 or 2 Coats)
Specialty Products, Inc. (SPI)Aquaseal Hi-Rise X3, Ultra Bond, Polyshield Polyurea Pure (1, 2, or 3 Coats)
SpectraShield Liner SystemsSpectraShieldPolyurea Hybrid (1, 2, or 3 Coats)
SpeedCove Inc. DBA Solid Rock EnterprisesSpeedCove Precast Cove Base SystemsOther
Stirling Lloyd Group Plc.IntegritankMethyl Methacrylate (2 Coats)
Stirling Lloyd Products Inc.IntegritankMethyl Methacrylate (2 Coats)
Termarust TechnologiesTermaflex TX4000 SeriesOther
The Thortex GroupChemi-TechEpoxy 100% Solids (1 or 2 Coats)
3M Electrical Markets DivisionScotchkoteEpoxy (1-2 Coats)/Urethane
Tnemec Company, Inc.Hi-Build Epoxoline II/ChemBlocEpoxy/Epoxy Novolac (2 Coats)
U.S. Coatings, LLCGripLineEpoxy/Epoxy 100% Solids
VersaFlex IncorporatedVF 380Polyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserPolyurea Pure (1, 2, or 3 Coats)
Wilko Paint, Inc.WilkoshieldVinyl Ester (3 Coats)
PERFORMANCE MATTERS. FROM THE GROUND UP.
For more information, please contact us at 713-926-1705 [email protected] www.USZINC.com
Elevate your performance with the best raw materials. Begin production with our zinc dust and zinc oxide.
Helping the world work.™
TTERS MA MATTERS
Elevate your perBegin production with our zinc dust and zinc oxide.
TTERS. FROM THE GROUND UP
mance with the best raw materials. forElevate your perBegin production with our zinc dust and zinc oxide.
.FROM THE GROUND UPFROM THE GROUND UP.
mance with the best raw materials. Begin production with our zinc dust and zinc oxide.
mation, please contact us at For more infor713-926-1705 [email protected]
Helping the world work.
mation, please contact us at [email protected] .USZINC.comwww
Helping the world work.™
22
Advanced Science CoatingsPO Box 748Sunset Beach, CA 90742 Phone: 209-481-2042Contact: Tom [email protected]
AFM3251 Third Ave.San Diego, CA 92103 Phone: 619-239-0321Contact: Jay [email protected]
Albi Mfg. A Division of StanChem Inc.401 Berlin St.East Berlin, CT 06023 Phone: 860-828-0571Contact:W. Casey [email protected]
Aldo Products Company, Inc.1604 N. Main St.Kannapolis, NC 28081 Phone: 800-474-6019Contact: Robert [email protected]
Alistagen CorporationTen Park Ave.New York, NY 10016 Phone: 212-317-0100Contact: Alis [email protected]
Alwan Paints and CoatingsAmeer Khusro Rd., KarsazKarachi, 75350 PakistanPhone: 92-321-8950091Contact: Raza [email protected]
Amercoat Canada/Nukote Canada1174 South Service Rd. W.Oakville, ON L6L 5T7 CanadaPhone: 905-847-1500Contact: Daniel [email protected]
American Industrial1218 W. 41st St., Ste. BTulsa, OK 74107 Phone: 918-445-0627Contact: Fred [email protected]
AmTech Tank Lining & Tank Repair75-4 Main St., Ste. 300Plymouth, NH 03264 Phone: 888-839-0373Contact: Dennis [email protected]
Andek Corporation850 Glen Ave., PO Box 392Moorestown, NJ 08057Phone: 800-800-2844Contact: Neil [email protected]
ARC CompositesDiv. of A.W. Chesterton860 Salem St., Bldg. AGroveland, MA 01834 Phone: 978-469-6666Contact: Kathy [email protected]
Aremco ProductsPO Box 517Valley Cottage, NY 10989 Phone: 845-268-0039Contact: Peter [email protected]
Arizona Polymer Flooring Inc.7731 N. 68th Ave.Glendale, AZ 85303 Phone: 888-855-3455Contact: Daniel [email protected] our display ad, p. 71.
Arkema Inc.900 First Ave., Bldg. #10King of Prussia, PA 19406 Phone: 610-205-7898Contact: Vince [email protected]
Arma Coatings5555 W. 11th Ave.Eugene, OR 97402 Phone: 800-524-2762Contact: Charles [email protected]
Armor Shield1343 Union Ave., NEGrand Rapids, MI 49505 Phone: 616-245-0757Contact: Patrick [email protected]
Associated Paint10160 NW South River Dr.Miami, FL 33178 Phone: 305-885-1964Contact: Lee [email protected]
ASTC Polymers Inc.3207 West Warner Ave.Santa Ana, CA 92704 Phone: 714-966-2893Contact: Dick [email protected]
Atlas Minerals & Chemicals, Inc.1227 Valley Rd., PO Box 38Mertztown, PA 19539 Phone: 610-682-7171Contact: Scott [email protected]
Avid Protective Products Ltd.2085 Laurelwood Dr.Oakville, ON L6H 4S8 CanadaPhone: 905-339-8386Contact: David [email protected]
Coating Company Profiles
Aashish Coating Tech Pvt. Ltd.140 Laxmi PlazaNew Link Rd., Andheri W.Mumbai, 400053 IndiaPhone: 91 22 [email protected]
ABRI Industries8055 West Manchester Ave.Ste. 735Playa Del Rey, CA 90293 Phone: 310-341-3600Contact: Lee [email protected]
AcryliCon Flooring Solutions12460 Crabapple Rd., Ste. 202-106Alpharetta, GA 30004 Phone: 888-736-7550Contact: Jason [email protected]
Acrylux Paint Co.6010 Powerline Rd.Ft. Lauderdale, FL 33309 Phone: 954-772-0300Contact: Andrew [email protected]
Acrymax Technologies, Inc.221 Brooke St.Media, PA 19063 Phone: 800-553-0523Contact: Eric [email protected]
Acry-Tech Coatings Inc.3601 NE 5th Ave.Ft. Lauderdale, FL 33334 Phone: 954-565-6001Contact:Miki [email protected]
Advanced Chemical Technologies, Inc.9608 North Robinson Ave.Oklahoma City, OK 73114 Phone: 800-535-0433Contact: Kevin [email protected]
iStockphoto.com/mikeuk
Ceram-Kote Coatings Inc.1800 Industrial Dr.Big Spring, TX 79720 Phone: 432-263-8497Contact: Kevin [email protected]
ChemCo Systems2800 Bay Rd.Redwood City, CA 94063 Phone: 800-757-6773Contact: John [email protected]
Chemcoat, Inc.2790 Canfields Ln.Montoursville, PA 17754 Phone: 800-326-9471Contact: Art [email protected]
Chemical Products Industries7649 SW 34th St.Oklahoma City, OK 73179 Phone: 405-745-2070Contact: Jordan [email protected]
Chemline5151 Natural Bridge Rd.St. Louis, MO 63115 Phone: 314-664-2230Contact: Steve [email protected]
ChemMasters, Inc.300 Edwards St.Madison, OH 44057 Phone: 440-428-2105Contact: John [email protected]
CIM Industries23 Elm St.Peterborough, NH 03458 Phone: 603-924-9481Contact: Becky [email protected]
Cloverdale Paint Inc.6950 King George Blvd.Surrey, BC V3W 4Z1 CanadaPhone: 604-596-6261Contact: Trevor [email protected]
CMP/Chugoku1610 Engineers Rd.Belle Chasse, LA 70037 Phone: 504-392-4817Contact: Nancy [email protected]
Coating Systems & Supply, LLC11479 Darryl Dr.Baton Rouge, LA 70815 Phone: 225-272-6385Contact:Michael R. [email protected]
Coatings For Industry, Inc.319 Township Line Rd.Souderton, PA 18964 Phone: 877-723-0919Contact: Kevin Klotzcficoatings.com
Comex Group5575 DTC Pkwy.Greenwood Village, CO 80111 Phone: 720-873-3060Contact: Customer [email protected]
Composite Technologies2010 Scott Ave.Calberton, NY 11933 Phone: 631-680-0662Contact: Gerald [email protected]
Concrete Coatings Inc.1105 N. 1600 W.Layton, UT 84041 Phone: 801-544-8771Contact: Cory [email protected]
Concrete SolutionsProducts by Rhino Linings9151 Rehco Rd.San Diego, CA 92121 Phone: 800-422-2603Contact: Bart [email protected]
Conklin Company Inc.551 Valley Park Dr.Shakopee, MN 55379 Phone: 800-888-8838Contact: Building Products Groupconklin.com
ConShield Technologies541 10th St., #233Atlanta, GA 30318 Phone: 877-543-2094Contact: Joe [email protected]
Construction Specialties Group, Inc.15783 Crocus LaneDumfries, VA 22025 Phone: 703-670-5300Contact: Neil [email protected]
Construction Systems SupplyPO Box 3894Seattle, WA 98124 Phone: 888-858-3790Contact: Ron [email protected]
Avilion Inc.3947 Lincoln Hwy.Downingtown, PA 19335 Phone: 610-942-7388Contact:Michelle [email protected]
Axalta Coating Systems North America9800 Genard Rd.Houston, TX 77041 Phone: 800-247-3886Contact: Customer [email protected]
BASF Corporation–Construction Systems889 Valley Park Dr.Shakopee, MN 55379 Phone: 800-433-9517Contact: Customer [email protected]
Bechtel Industrial Coating Supply21424 SE 16th Pl.Sammamish, WA 98075 Phone: 425-392-1876Contact: Robert [email protected]
Blendex Industrial Corp.135 Bangor St.Lindenhurst, NY 11757 Phone: 888-376-9935Contact: John [email protected]
Blome InternationalPart of the HEMPEL Group1450 Hoff Industrial Dr.O'Fallon, MO 63366 Phone: 636-379-9119Contact:Marcella [email protected]
Blue River Coatings2910 South Nebraska Ave.Hastings, NE 68901 Phone: 888-420-2628Contact: Phil [email protected]
Blue Water Marine Paint1999 Elizabeth St.North Brunswick, NJ 08902 Phone: 908-967-9867Contact: Paul [email protected]
Bowers Industrial3645 W. 1987 SouthSalt Lake City, UT 84104 Phone: 800-892-5224Contact: Kevin [email protected]
Bradley Coatings Group2873 West Hardies Rd.Gibsonia, PA 15044 Phone: 724-444-4400Contact: Phil [email protected]
Burke Industrial Coatings600 South 74 Pl., #108Ridgefield, WA 98642 Phone: 800-348-3245Contact: Jim Harrisjpharris@burkeindustrialcoatings.comburkeindustrialcoatings.com
Cantex Coatings Ltd.2390 Industrial St.Burlington, ON M7P 1A5 CanadaPhone: 905-319-8972Contact: Jerry Van [email protected]
CANUSA-CPS25 Bethridge Rd.Toronto, ON M9W 1M7 CanadaPhone: 416-744-5798Contact: Bob [email protected]
Capitol Paint Manufacturing Corp.722 SW 23rd St.Oklahoma City, OK 73109 Phone: 405-634-3383Contact: Stan [email protected]
Carboline Company2150 Schuetz Rd.St. Louis, MO 63146 Phone: 314-644-1000Contact: Customer [email protected] our display ad, inside front cover.
CCI Con-Tech of California, Inc.2211 Navy Dr.Stockton, CA 95206 Phone: 209-941-8324Contact: Steven A. [email protected]
Ceilcote (International Paint LLC)6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales [email protected]
Celufibre Industries Inc.14735 - 124th Ave.Edmonton, AB T5L 3B2 CanadaPhone: 780-447-1255Contact: Kevin [email protected]
Coating Company Profiles24
Contego International, Inc.334 Greyhound Pass WestCarmel, IN 46032 Phone: 800-434-6444Contact: Tony [email protected]
Contract Coatings Corporation706 E. Main St.Stockton, CA 95202 Phone: 209-465-2634Contact: Arlen [email protected]
Convenience Products/Seal-Krete306 Gandy Rd.Auburndale, FL 33823 Phone: 800-323-7357Contact: David [email protected] our display ad, p. 70.
Cooley Group50 Esten Ave.Pawtucket, RI 02860 Phone: 401-721-6261Contact: David [email protected]
Copolymer Protection SystemsPO Box 2860Danville, CA 94526 Phone: 925-551-7796Contact: Gerald [email protected]
Copps Industries, Inc.10600 N. Industrial Dr.Mequon, WI 53092 Phone: 800-672-2622Contact: Jeff [email protected]
Corolon Coatings & Corrosion Control Tech. Inc.2 Haas Rd.Toronto, ON M9W 3A2 CanadaPhone: 416-401-8855Contact: Stan E. [email protected]
Corotech High Performance Coatings101 Paragon Dr.Montvale, NJ 07645 Phone: 201-949-6216Contact: Jeffrey T [email protected]
Corporacion Mara SAJr. Pereseo 251Chorrillos, 9 PeruPhone: 51-12013535Contact: Fredy [email protected]
Corrocoat LimitedForster St., LeedsWest Yorkshire, LS10 1PW UKPhone: 44 113 276 0760Contact: Graham Greenwoodcorrocoat.com
Corrocoat USA Inc.6525 Greenland Rd.Jacksonville, FL 32258 Phone: 904-268-4559Contact: Josh [email protected]
Corroseal6107 N. Marine Dr.Portland, OR 97203 Phone: 800-237-1573Contact: Sue [email protected]
Cortec Corporation4119 White Bear Pkwy.St. Paul, MN 55110 Phone: 651-429-1100Contact: Cliff [email protected]
Cote-L Industries Inc.1542 Jefferson St.Teaneck, NJ 07666 Phone: 201-836-0733Contact: Cy [email protected]
CRC-Evans7011 High Life Dr.Houston, TX 77066 Phone: 832-249-3100Contact: Kevin [email protected]
Creto Worldwide125 East Reno Ave., Ste. 1Las Vegas, NV 89119 Phone: 702-372-6274Contact: John [email protected]
Crossfield Products Corp.3000 E. Harcourt St.Rancho Dominguez, CA 90221 Phone: 310-886-9100Contact: Jodi [email protected]
CSL Silicones Inc.144 Woodlawn Rd. WestGuelph, ON N1H 1B5 CanadaPhone: 519-836-9044Contact: Patrick [email protected]
Dow Chemical Company9008 BuildingMidland, MI 48642 Phone: 800-447-4369Contact: Dave Petersondow.com
Dow Corning CorporationPO Box 0994Midland, MI 48686Phone: 800-248-2481Contact: Customer [email protected]/coatings
Dudick, Inc.1818 Miller Pkwy.Streetsboro, OH 44241 Phone: 330-562-1970Contact: Barb [email protected]
Dunn-Edwards4885 E. 52nd Pl.Los Angeles, CA 90058 Phone: 888-337-2468Contact: Customer [email protected]
Duraamen Engineered Products Inc.116 West 23rd St.New York, NY 10011 Phone: 212-386-7609Contact: Victor [email protected]
Duromar, Inc.706 Washington St.Pembroke, MA 02359 Phone: 781-826-2525Contact: Paul [email protected]
Dynafloor Systems553 Highland Rd. E.Macedonia, OH 44056 Phone: 800-453-6366Contact: Jerry [email protected]
Dynamic Coatings Inc.5629 East Westover Ave.Fresno, CA 93727 Phone: 877-225-2549Contact: Peter [email protected]
Dampney Co., Inc.85 Paris St.Everett, MA 02149 Phone: 617-389-2805Contact: Dennis [email protected]
Daubert Chemical Co.4700 S. Central Ave.Chicago, IL 60638 Phone: 708-563-8302Contact: Frank [email protected]
Daubert Cromwell12701 S. Ridgeway Ave.Alsip, IL 60803 Phone: 708-293-7750Contact:Martin [email protected]
Davlin Coatings700 Alston WayBerkeley, CA 94710 Phone: 510-848-2863Contact: Jim [email protected]
Demilec (USA) LLC2925 Galleria Dr.Arlington, TX 76011 Phone: 817-640-4900Contact: Robert [email protected]
Denso North America9747 Whithorn Dr.Houston, TX 77095 Phone: 281-821-3355Contact: Jesse [email protected] our display ad, p. 115.
Dependable, LLCPO Box 16307Rocky River, OH 44116 Phone: 717-951-0494Contact: Joe [email protected]
Devoe High Performance Coatings (International Paint LLC)6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales/Tech. [email protected]
Diamond Vogel Paint Company1110 Albany Pl. SEOrange City, IA 51041 Phone: 712-737-8880Contact: Perry [email protected]
Coating Company Profiles25
Elastomer Specialties Inc.10848 South 265thBroken Arrow, OK 74014 Phone: 918-486-4244Contact: Neil [email protected]
Endura Manufacturing Ltd.12425-149th St.Edmonton, AB T5L 2J6 CanadaPhone: 780-451-4242Contact: Elissa [email protected]
Endur-O-Seal USA, Inc.12502 Lazywood Ln.Pinehurst, TX 77362 Phone: 281-356-5117Contact: Tessi [email protected]
ENECON Corporation6 Platinum Crt.Medford, NY 11763 Phone: 516-349-0022Contact:Mike [email protected]
Enviroline (International Paint LLC)6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales [email protected]
Environmental Protective Coatings Inc.2035 Regency Rd., Ste. 5Lexington, KY 40503 Contact: Homer O. [email protected]
Envirotrol, Inc.2594 Flat Shoals Rd.Conyers, GA 30013 Phone: 770-922-4737Contact: Pat [email protected]
Eoncoat LLC4000 Airport Dr. NWWilson, NC 27896 Phone: 252-360-3110Contact: Jim [email protected]
EPDM Coatings494 Bridgeport Ave., Ste. 101-342Shelton, CT 06484 Phone: 855-281-0940Contact: Kelly [email protected]
Euclid Chemical Company19218 Redwood Rd.Cleveland, OH 44110 Phone: 800-321-7628Contact: Technical [email protected]
Evonik Industries299 Jefferson Rd.Parsippany, NJ 07054Phone: 973-929-8513Contact: Anil [email protected]
Fabick Protective Coatings4118 Robertson Rd.Madison, WI 53714 Phone: 608-242-1100Contact: Steven [email protected]
Farrell-Calhoun Paint221 East CarolinaMemphis, TN 38126 Phone: 901-526-2211Contact: Craig [email protected]
Farwest Corrosion Control Company1480 W. Artesia Blvd.Gardena, CA 90248Phone: 310-532-9314Contact:Marnie [email protected]
Fire Free Coatings Inc.580 Irwin St., Ste. 1San Rafael, CA 94901 Phone: 415-459-6488Contact: Elisa [email protected]
Flame Control Coatings, LLC4120 Hyde Park Blvd.Niagara Falls, NY 14305 Phone: 716-282-1399Contact: Tim [email protected]
Floor Seal Technology, Inc.1005 Ames Ave.Milpitas, CA 95035 Phone: 408-590-4849Contact: Bill [email protected]
FLOROCK, Crawford Labs, Inc.4165 S. Emerald Ave.Chicago, IL 60609 Phone: 800-356-7625Contact: Customer [email protected]
FSC Coatings Inc.5360 Eastgate Mall Rd., Ste FSan Diego, CA 92121 Phone: 800-579-8459Contact: Steve [email protected]
G3 Tapes11639 Riverside Dr., Ste. 103Lakeside, CA 92040 Phone: 619-448-4439Contact:Meghan [email protected]
Gaco Western, LLC200 West Mercer St., Ste. 202Seattle, WA 98119 Phone: 800-456-4226Contact: Customer [email protected]
Gelest, Inc.11 E. Steel Rd.Morrisville, PA 19067 Phone: 215-547-1015Contact: Gabrielle [email protected]
Gemite Products Inc.1787 Drew Rd.Mississauga, ON L5S 1J5 CanadaPhone: 888-443-6483Contact: Igor [email protected]
Georg Fischer Central Plastics39605 IndependenceShawnee, OK 74804 Phone: 800-654-3872Contact:Mark [email protected]
Gill Industries, Inc.3462 Kershaw Camden Hwy.Lancaster, SC 29720 Phone: 803-285-4831Contact: G. Shane [email protected]
Glidden Professional15885 W. Sprague Rd.Strongsville, OH 44136 Phone: 800-984-5444Contact: [email protected]
Global EcoTechnologiesPO Box 2205Antioch, CA 94531 Phone: 925-473-9250Contact: Scott [email protected]
Global Industrial Coatings11130 Twitty Dr.Rolla, MO 65401 Phone: 573-364-2722Contact: George [email protected]
Goodwest Linings and Coatings8814 Industrial Ln.Rancho Cucamonga, CA 91730 Phone: 951-236-7576Contact: Patrick [email protected]
Groco Specialty Coatings10818 C.F. Hawn Fwy.Dallas, TX 75217 Phone: 972-286-7890Contact: Bob [email protected]
Gulf Coast Paint Mfg., Inc.30075 County Rd. 49Loxley, AL 36551 Phone: 251-964-7911Contact: John R. [email protected]
hci chemtech, inc.310 S. Bellis St.Wausau, WI 54403 Phone: 800-596-6282Contact: Cheryl [email protected]
HDIM Protective Coatings14538 121A Ave.Edmonton, AB T5L 4L2 CanadaPhone: 780-482-4346Contact: Norm [email protected]
Hempel (USA) Inc.600 Conroe Park North Dr.Conroe, TX 77303 Phone: 936-523-6000Contact:Marcella [email protected] our display ads, pp. 54, 82, and 100.
Heresite Protective Coatings, LLC822 South 14th St.Manitowoc, WI 54220 Phone: 920-684-6646Contact: Greg [email protected]
Highland International, Inc.465 Industrial Park Dr., PO Box 3564Boone, NC 28607 Phone: 828-265-2513Contact: Katie Dudakduda@highland-international.comhighland-international.comSee our display ad, p. 61.
Hi-Tech Concrete Coatings Inc.430 Oak Ln.Lititz, PA 17543 Phone: 717-664-4006Contact: Brian A. [email protected]
Coating Company Profiles26
Coating Company Profiles27
Industrial Maintenance Group, Inc.1904 Industrial Park Dr.Plant City, FL 33566 Phone: 813-659-3512Contact: Pete Van Fossenpete@industrialmaintenancegroup.comindustrialmaintenancegroup.com
Industrial Nanotech Inc.1925 Trade Center Way, Ste. 1Naples, FL 34109 Phone: 800-767-3998Contact: Francesca [email protected]
Inliner Technologies1468 West Hospital Rd.Paoli, IN 47454 Phone: 812-723-0704Contact: Geoff [email protected]
Innovative Coatings1685 Rossi Dr.Windsor, ON N9A 6J3 CanadaPhone: 519-737-9046Contact:Wayne [email protected]
Insulating Coatings Corporation27 Link Dr., Ste. DBinghamton, NY 13904 Phone: 800-223-8494Contact: Rick [email protected]
Integrated Protective Coatings Inc.7036 - 50th St.Edmonton, AB T6B 2J8 CanadaPhone: 780-456-3467Contact: Andrew [email protected]
Intercoastal Paint Co.14029 W. Hardy Rd.Houston, TX 77060 Phone: 281-448-5258Contact: Heidi [email protected]
International Cellulose Corporation12315 Robin Blvd.Houston, TX 77045 Phone: 800-444-1252Contact: Chuck [email protected]
International Chem-Crete Corp.800 Security RowRichardson, TX 75081 Phone: 972-671-6477Contact: Jay [email protected]
International Coatings311 NW 122nd St., Ste. 100Oklahoma City, OK 73114 Phone: 800-624-8919Contact: Eileen [email protected]
International Metal Fusion Corporation900 NW 10th Ave.Fort Lauderdale, FL 33311 Phone: 409-515-0532Contact: Abad [email protected]
International Paint LLC6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales [email protected] our display ad, p. 63.
International Polyurethane Systems5590 46th Ave. SESalmon Arm, BC V1E 4S1 CanadaPhone: 250-832-5142Contact: Don [email protected]
IPA Systems, Inc.2745 N. Amber St.Philadelphia, PA 19134 Phone: 215-425-6607Contact: John [email protected]
IPS Polymers Systems8530 Milliken Ave.Rancho Cucamonga, CA 91730 Phone: 909-941-4999Contact: Amy [email protected]
Isolatek International41 Furnace St.Stanhope, NJ 07874 Phone: 800-631-9600Contact: Sean [email protected]
ITW Devcon30 Endicott St.Danvers, MA 01923 Phone: 800-933-8266Contact: Jessica [email protected]
ITW Polymers Coatings North America12055 Cutten Rd.Houston, TX 77066 Phone: 267-646-1437Contact: Alan [email protected] our display ad, p.120 .
Hi-Temp Coatings TechnologyPO Box 2347Acton, MA 01720 Phone: 978-635-1110Contact:Mike [email protected]
HJ3 Composite Technologies2440 West Majestic Park WayTucson, AZ 85705 Phone: 520-322-0010Contact: John [email protected]
Huntsman Polyurethanes2190 Executive Hills Blvd.Auburn Hills, MI 48326 Phone: 248-322-7431Contact: Kevin A. [email protected]/pu/ace
Hydra Tech Engineered Products10448 Chester Rd.Cincinnati, OH 45215 Phone: 513-827-9169Contact: Tim [email protected]
Hydrex Underwater Technology604 Druid Rd. E.Clearwater, FL 33756 Phone: 727-443-3900Contact: John [email protected]
Hyperseal34-801 Spyder Cir.Palm Desert, CA 92211 Phone: 760-324-7900Contact: Brian [email protected]
IndMar Coatings Corporation317 W. Main St., PO Box 456Wakefield, VA 23888 Phone: 757-899-3807Contact:Wilmer [email protected]
Induron Coatings, Inc.3333 R. Arrington Jr. Blvd. N.Birmingham, AL 35234 Phone: 800-324-9584Contact: Jeff [email protected]
Industrial Coatings & Sealants12521 Evergreen Dr., Ste. BMukilteo, WA 98275 Phone: 425-742-5693Contact: Greg [email protected]
Jamestown Coating Technologies108 Main St.Jamestown, PA 16134 Phone: 724-932-3101Contact:Michael [email protected]
Johnson Industrial Coatings10436 N. NC Hwy. 150Clemmons, NC 27012 Phone: 336-764-1648Contact: Jay [email protected]
Jotun Paints Inc.842 W. Sam Houston Pkwy. N. City Center Three, Ste. 300Houston, TX 77024 Phone: 314-616-1797Contact: [email protected] our display ads, pp. 74 and 106.
Kaufman Products, Inc.3811 Curtis Ave.Baltimore, MD 21226 Phone: 800-637-6372Contact: Alex [email protected]
KCC Corrosion Control Co., Ltd.4018 Trey Dr.Houston, TX 77084 Phone: 281-550-1199Contact: Owen T. [email protected]
Kelly-Moore Paint Company987 Commercial St.San Carlos, CA 94070 Phone: 800-874-4436Contact: Rusty [email protected]
KEMA Coatings LImited60 Wyndham St. South, Unit 904Guelph, ON N1E 7H7 CanadaPhone: 519-826-9374Contact:Mark [email protected]
Kemper System America, Inc.1 Reuten Dr.Closter, NJ 07624 Phone: 800-541-5455Contact: James [email protected]
Key Resin Company4050 Clough Woods Dr.Batavia, OH 45103 Phone: 888-943-4532Contact: Eric [email protected]
Coating Company Profiles28
Pacific Southwest Coatings18220 Watson WayYorba Linda, CA 92886 Phone: 714-225-3688Contact: Laurence [email protected]
Paragon Fusionclad809 77 Ave.Edmonton, AB T6P 1S9 CanadaPhone: 780-461-7719Contact: Dean [email protected]
Pecora165 Wambold Rd.Harleysville, PA 19438 Phone: 215-799-7530Contact: Alicia [email protected]
Peerless Industrial SystemsPO Box 2041Hampton East, 03189 AustraliaPhone: 61 408 949 368Contact: Nick [email protected]
peerlessindustrialsystems.com
Pilgrim Permocoat402 South 22nd St.Tampa, FL 33605 Phone: 800-637-3328Contact: Robert [email protected]
Plastocor Inc.100 Research Rd.Hingham, MA 02043 Phone: 724-942-0582Contact: Jim [email protected]
The Platt Brothers & CompanyPO Box 1030Waterbury, CT 06721 Phone: 203-753-4194Contact: David [email protected]
Plexi-Chemie, Inc.606 Lane Ave. North, Ste. 6Jacksonville, FL 32043 Phone: 904-693-8800Contact: Elizabeth [email protected]
Polar IndustriesPO Box 293Fisher Branch, MB R0C 0Z0 CanadaPhone: 786-955-4008Contact: Lillian [email protected]
Neogard2728 Empire CentralDallas, TX 75235 Phone: 214-353-1689Contact: Bob [email protected]
NIC Industries7050 6th St.White City, OR 97503 Phone: 541-826-1922Contact: Jeff [email protected]
Normac Adhesive Products Inc.1350 Heine Crt.Burlington, ON L7L 6M4 CanadaPhone: 905-332-6455Contact: George [email protected]
Northern Industries Inc.429 Tiogue Ave.Coventry, RI 02816 Phone: 401-821-2121Contact: Rick [email protected]
NOV Tuboscope2835 Holmes Rd.Houston, TX 77051 Phone: 713-799-5130Contact: Ryan [email protected]
Nox-Crete Products Group1444 S. 20th St.Omaha, NE 68108 Phone: 402-341-2080Contact: Customer [email protected]
NSP Specialty ProductsPO Box 4690Pinehurst, NC 28374 Phone: 910-235-0468Contact: Larry [email protected]
Oak Ridge Chemical and Equipment575 Commercial Ave.Green Lake, WI 54941 Phone: 800-625-9577Contact: Jed [email protected]
OCM–Adeka1215 Henri Dr.Wauconda, IL 60084 Phone: 866-457-5710Contact:Mike [email protected]
Klaas Coatings (North America) LLCPO Box 25122Dallas, TX 75225 Phone: 866-317-3633Contact: Richard Taylorinfo@klaascoatings-northamerica.comklaascoatings-northamerica.com
KOSTER American Corp.2585 Aviator Dr.Virginia Beach, VA 23453 Phone: 757-425-1206Contact: Ray [email protected]
Kryton International Inc.1645 East Kent Ave.Vancouver, BC V5P 2S8 CanadaPhone: 604-324-8280Contact: Isabella [email protected]
Linabond1161 Avenida AcosoCamarillo, CA 93012 Phone: 818-362-7373Contact: Georgia [email protected]
Liquid Metal Coatings, LLC7015 W. 16th Ave.Lakewood, CO 80215 Phone: 303-202-204Contact: Bob Scheckliquidmetalcoatings.com
Lone Star Specialties, LLC6412 US Hwy. 259 SouthLone Star, TX 75668 Phone: 903-656-2536Contact: Tony Thigpenlonestarspecialties.net
Lonza Microbial Control5660 New Northside Dr., Ste. 1100Atlanta, GA 30328 Phone: 800-523-7391Contact: Damali [email protected]
LuminOre6060 Corte del CedroCarlsbad, CA 93011 Phone: 760-431-7705Contact: Jenny [email protected]
MMad Dog Primer309 Plum St. N.Northfield, MN 55057 Phone: 507-645-7431Contact: Steve [email protected]
Madison Chemical Industries490 McGeachie Dr.Milton, ON L9T 3Y5 CanadaPhone: 905-878-8863Contact: Kim [email protected]
Mascoat4310 Campbell Rd.Houston, TX 77041 Phone: 713-465-0304Contact: Chad [email protected] our display ad, p. 56.
Micor Company, Inc.3232 N. 31st St.Milwaukee, WI 53216 Phone: 800-284-4308Contact: Bill [email protected]
Midsun Group, Inc.135 Redstone St.Southington, CT 06480 Phone: 860-378-0100Contact: Andy [email protected]
Morin Industrial Coatings Ltd.Box 765Lively, ON P3Y 1M7 CanadaPhone: 705-692-9090Contact: Adam [email protected]
Nanochem Technologies1203 Kent St.Elkhart, IN 46514 Phone: 574-970-2436Contact: Richard J. [email protected]
National Polymers Inc.9 Guttman Ave.Charleroi, PA 15022 Phone: 724-483-9300Contact: Erica [email protected]
Nationwide ChemicalCoating Mfrs., Inc.7106 24th Crt. EastSarasota, FL 34243 Phone: 800-423-7264Contact: [email protected]
Coating Company Profiles29
Polibrid Coatings, Inc.6700 F.M. 802Brownsville, TX 78526 Phone: 956-831-7818Contact: Klaus D. [email protected]
Polycoat Products14722 Spring Ave.Santa Fe Springs, CA 90670 Phone: 562-802-8834Contact: Joe [email protected]
Polycorp Ltd.33 York St.Elora, ON N0B 1S0 CanadaPhone: 519-846-2075Contact: Dennis [email protected]
Polyguard Products, Inc.PO Box 755Ennis, TX 75120 Phone: 281-580-5700Contact: Chic [email protected]
Polymax/Milamar Coatings LLC311 NW 122nd St., Ste. 100Oklahoma City, OK 73114 Phone: 405-755-8454Contact: Joanne [email protected]
Polytech Industrial Coatings, Inc.PO Box 12407Fresno, CA 93777 Phone: 800-507-2953Contact: Andrew [email protected]
polytechindustrialcoatings.com
Polyval Coatings520 Boul Cure BoivinBoisbriand, QC H3S 2N6 CanadaPhone: 800-465-0905Contact:Marc [email protected]
PPC Coatings (MTR)2 Pixie Rd.Wilmington, DE 19810 Phone: 877-588-2227Contact: Cliff [email protected]
PPG Protective & Marine CoatingsOne PPG Pl.Pittsburgh, PA 15272 Phone: 888-977-4762Contact: Steve [email protected] our display ad, p. 116.
Precision Coatings Inc.1940 East TrafficwaySpringfield, MO 65802 Phone: 888-340-6780Contact: Jim O’[email protected]
Preferred Products Corp.231 S. 3rd St.Burlington, IA 52601 Phone: 319-754-4823Contact: Ken [email protected]
Premier Coating Systems Inc.606 N. Lane Ave., #6Jacksonville, FL 32254 Phone: 904-824-1799Contact: Ron [email protected]
Prime Coat Coating Systems405 Oakwood Ave.Waukegan, IL 60085 Phone: 847-362-5111Contact: Kevin [email protected]
Professional Products of Kansas, Inc.4456 S. CliftonWichita, KS 67216 Phone: 316-522-9300Contact: Vicky [email protected]
Protective Floorings and Linings a Div. of Milamar Coatings LLC311 NW 122nd St., Ste. 100Oklahoma City, OK 73114 Phone: 405-755-8454Contact: Joanne [email protected]
Protecto Wrap Company1955 Cherokee St.Denver, CO 80223 Phone: 800-759-9727Contact: Victoria [email protected]
Protek Paint Ltd.335 Horner Ave.Toronto, ON M8W 1Z6 CanadaPhone: 800-773-5233Contact: Barry [email protected]
Pyrotech1121 Hellam St.Monterrey, CA 93940 Phone: 630-628-1120Contact: Jim [email protected]
Quadex/Interfit USA4801 Crystal Hill Rd.North Little Rock, AR 72118 Phone: 501-758-8628Contact: Stuart [email protected]
Quality Systems, Inc./Permacrete1101 Menzler Rd.Nashville, TN 37210 Phone: 615-331-9200Contact: George [email protected]
Randolph Products33 Haynes Cir.Chicopee, MA 01020 Phone: [email protected]
Raven Lining Systems13105 East 61st St., Ste. ABroken Arrow, OK 74012 Phone: 800-324-2810Contact: Kaye [email protected]
REMA Corrosion Control, Inc.119 Rockland Ave.Northvale, NJ 07647 Phone: 440-781-6226Contact: Larry [email protected]
Rhino Linings Corporation9151 Rehco Rd.San Diego, CA 92121 Phone: 800-422-2603Contact: Tim [email protected]
Richard’s Paint Mfg. Co., Inc.200 Paint St.Rockledge, FL 32955 Phone: 800-432-0983Contact: Eric [email protected]
Riley Paint Company106 Washington St.Burlington, IA 52601 Phone: 319-759-2516Contact: John [email protected]
Rock-Tred Corporation405 Oakwood Ave.Waukegan, IL 60085 Phone: 847-673-8200Contact: Erik [email protected]
Rodda Paint Co./Cloverdale Paint6107 N. Marine Dr.Portland, OR 97203 Phone: 503-572-8201Contact: Tom [email protected]
RoofMart International Inc.2735 Rain Rd., PO Box 502Chapman, KS 67431 Phone: 800-345-1439Contact: Customer [email protected]
Roval USA Corp.12270 NW Luoto Ln.Carlton, OR 97111 Phone: 971-237-0958Contact: Aldo [email protected]
Royce International LLC3400 S. Tamiami TrailSarasota, FL 34239 Phone: 941-894-1228Contact: Christine [email protected]
Rust Bullet, LLC300 Brinkby Ave., Ste. 200Reno, NV 89509 Phone: 775-829-5606Contact: Kathline A. [email protected]
Safe Encasement Systems1795 N. Snow Canyon Pkwy., Unit 63St. George, UT 84770 Phone: 888-277-8834Contact: John [email protected]
Sampson Coatings1900 Ellen Rd.Richmond, VA 23230 Phone: 804-349-2820Contact: Joe [email protected]
Sauereisen, Inc.160 Gamma Dr.Pittsburgh, PA 15238 Phone: 412-963-0303Contact: Lake [email protected]
SaverSystems/Defy800 South 7th St.Richmond, IN 47374 Phone: 800-860-6327Contact: Customer [email protected]
Coating Company Profiles30
Seacoat Technology11215 Jones Rd. W., Ste. HHouston, TX 77065 Phone: 832-237-4400Contact: John [email protected]
Seal For Life IndustriesPart of Berry Plastics Engineered Materials DivisionGasselterstraat 20Stadskanaal, 9503JB NetherlandsPhone: 31 599 696170Contact: J.F. [email protected] our display ad, p. 88.
ShawCor CSI Services1607-10 St.Nisku, AB T9E 0A7 CanadaPhone: 403-218-8262Contact: Sam [email protected]
Sherwin-Williams101 Prospect Ave. NWCleveland, OH 44115 Phone: 800-524-5979Contact: Customer [email protected]/protectiveSee our display ads, pp. 40, 138, and 146.
Simco Coatings Inc.211 Gunther LaneBelle Chasse, LA 70037 Phone: 504-393-9455Contact: Paul [email protected]
Simpson Strong-TiePO Box 10789Pleasanton, CA 94588 Phone: 800-999-5099Contact: Edward [email protected]
SOPREMA310 Quadral Dr.Wadsworth, OH 44281 Phone: 800-356-3521Contact: Jason [email protected]
Soprema, Inc.1688 J.B. MichaudDrummondville, QC J2C 8E9 CanadaPhone: 819-478-8166Contact: Dennis [email protected]
SpecChem1511 Baltimore Ave.Kansas City, MO 64108 Phone: 866-791-8700Contact:Mike [email protected]
Specguard909 Mahar Ave.Wilmington, CA 90744 Phone: 310-834-7037Contact: Larry [email protected]
Specialty Products, Inc. (SPI)2410 104th St., Ct. S., Ste. DLakewood, WA 98499 Phone: 253-588-7101Contact: Chas [email protected]
SpectraShield Liner Systems4527 Sunbeam Rd.Jacksonville, FL 32257 Phone: 904-419-4889Contact: Bob [email protected]
SpeedCove Inc. DBA Solid Rock Enterprises5781 Pleasant Valley Rd.El Dorado, CA 95623 Phone: 530-344-9000Contact: Doug [email protected]
Sprayroq248 Cahaba Valley Pkwy.Pelham, AL 35124 Phone: 205-957-0020Contact: Jerry [email protected]
Stirling Lloyd Group Plc.Union Bank, King St.Knutsford, Cheshire, WA16 6EF UKPhone: 44-1565 633111Contact: Dave [email protected]
Stirling Lloyd Products Inc.152 Rockwell Rd., Bldg. ANewington, CT 06111 Phone: 860-666-5008Contact: Tom [email protected]
Sto Corp.3800 Camp Creek Pkwy.Atlanta, GA 30331 Phone: 678-553-3269Contact: Thomas [email protected]
SpeedCove3 wrule:Layout 1 10/9/09 3:21 P
The Strong Company, Inc.4505 Emmett Sanders Rd.Pine Bluff, AR 71601 Phone: 870-535-7617Contact: Billy [email protected]
Sub-One Technology4464 Willow Rd., Bldg. 103Pleasanton, CA 94588 Phone: 925-924-1020Contact: Dore [email protected]
Subsea Industries NVHaven 29 - Noorderlaan 9Antwerp, 2030 BelgiumPhone: 32-3 213 53 18Contact:Manuel [email protected]
Sulzer Metco1101 Prospect Ave.Westbury, NY 11590 Phone: 800-638-2699Contact: Customer [email protected]
Superior Epoxies & Coatings Inc.2527 Lantrac Ct.Decatur, GA 30035 Phone: 800-240-1310Contact: John [email protected]
Sureshield Coatings Company350 Northgate Pkwy.Wheeling, IL 60090 Phone: 847-291-6960Contact:Michael [email protected]
TCI Coatings Inc.220 Industrial Blvd.Austin, TX 78745 Phone: 512-444-2824Contact: Kevin [email protected]
Termarust Technologies8150 Rue de L’IndustrieMontreal, QC H1J 1S7 CanadaPhone: 888-279-5497Contact: Craig [email protected] our display ad, p. 47.
Tesla NanoCoatings, Inc.6200 Frank Ave. NW Advanced Technical Center, T101North Canton, OH 44720 Phone: 610-764-1232Contact: Joe [email protected]
Coating Company Profiles31
Textured Coatings of America2422 E. 15th St.Panama City, FL 32405 Phone: 800-454-0340Contact: Regina [email protected]
ThermionPO Box 780Silverdale, WA 98383 Phone: 877-884-3428Contact: Dean [email protected]
Thin Film Technology, Inc.802 Utah St.South Houston, TX 77587 Phone: 713-910-6200Contact: Jeff [email protected]
The Thortex Group12 Iron Bridge Dr.Collegeville, PA 19426 Phone: 610-831-0222Contact: Kevin [email protected]
3L&T Inc.897 Independence Ave., #1BMountain View, CA 94043 Phone: 650-625-0177Contact: Linas [email protected]
3M Atlanta3700 Atlanta Industrial Pkwy.Atlanta, GA 30331 Phone: 404-696-2730Contact: Abdul Razzak3m.com
3M Electrical Markets Division6801 River Pl. Blvd., 147-4N-01Austin, TX 78726 Phone: 512-984-7801Contact:Michelle [email protected]/corrosion
TMS Manufacturing Co.3555 W. 123rd St.Alsip, IL 60803 Phone: 708-385-6633Contact:Michael [email protected]
TMS Metalizing Systems, Ltd.7665 NW Eldorado Blvd., #101Bremerton, WA 98312 Phone: 360-692-6656Contact: Dave [email protected]
Tnemec Company, Inc.515 E. Main St.Boonville, IN 47601 Phone: 812-449-0167Contact:Michael [email protected]
Tnemec Company, Inc.6800 Corporate Dr.Kansas City, MO 64120 Phone: 816-483-3400Contact:Mark [email protected]
Total Containment Solutions Inc.11000 Metro Pkwy., Ste. 20Fort Myers, FL 33966 Phone: 239-275-6235Contact:Michael [email protected]
Total Wall390 Viking Cir.Rio, WI 53960 Phone: 888-702-9915Contact: Octavian [email protected]
TPR2 Corporation36 Plains Rd.Essex, CT 06426 Phone: 860-767-8772Contact: Brian [email protected]
Transpo Industries Inc.20 Jones St.New Rochelle, NY 10801 Phone: 914-636-1000Contact: John [email protected]
Trenton Corporation7700 Jackson Rd.Ann Arbor, MI 48103 Contact: Frank Ramptontrentoncorp.com
Tuf Top Coatings4590 60th Ave. N.St. Petersburg, FL 33714 Phone: 727-527-3382Contact: Greg [email protected]
U.S. Coatings, LLCPO Box 220313St. Louis, MO 63122 Phone: 314-205-1500Contact: Larry [email protected]
Ultimate Linings6630 Roxburgh Ave., #175Houston, TX 77041 Phone: 562-802-8834Contact: Stacy [email protected]
US Coating Solutions5948 Emerson Ave.Minneapolis, MN 55419 Phone: 386-313-3033Contact: Garry [email protected]
VersaFlex Incorporated686 S. Adams St.Kansas City, KS 66105 Phone: 913-321-9000Contact: Todd [email protected]
Visuron Technologies Inc.5174 McGinnis Ferry Rd.Ste. 106Alpharetta, GA 30005 Phone: 770-815-4548Contact: Tim [email protected]
W.R. Meadows300 Industrial Dr.Hampshire, IL 60140 Phone: 800-342-5976Contact: Jason [email protected]
Walla Walla Environmental4 West Rees Ave.Walla Walla, WA 99362 Phone: 509-522-0490Contact: Cassie [email protected]
Wasser Corporation4118 B Pl. NW, Ste. BAuburn, WA 98001 Phone: 800-627-2968Contact: Kevin [email protected] our display ad, p. 143.
Watson Coatings, Inc.325 Paul Ave.St. Louis, MO 63135 Phone: 314-521-2000Contact: Paul [email protected] our display ad, p. 51.
Westcoat770 Gateway Center Dr.San Diego, CA 92102 Phone: 800-250-4519Contact: Dean [email protected]
WFI Global, LLC4118 Robertson Rd.Madison, WI 53714 Phone: 618-978-1119Contact: Gary [email protected]
Whitford Corporation47 Park Ave.Elverson, PA 19520 Phone: 610-286-3500Contact: Brian [email protected]
Wilko Paint, Inc.2727 OhioWichita, KS 67219 Phone: 800-658-3799Contact: Don [email protected]
Williams-Hayward Protective Coatings7425 West 59th St.Summit, IL 60501 Phone: 708-563-5182Contact: Edward [email protected]
ZRC Worldwide145 Enterprise Dr.Marshfield, MA 02050 Phone: 800-831-3275Contact: Lorraine [email protected]