Jimmy Simpson's · 9/28/2018 · Jimmy Simpson's Pentel P200 Family Collection As of September 28,...

Jimmy Simpson's

Pentel P200 Family

Collection

As of September 28, 2018

9/28/2018

Pentel P200 Family Collection

This collection started back in the 1980’s when my dad gave me my first mechanical pencil; a black Pentel P205, which I now know as a Pentel P205A Generation 5. The second pencil in this collection came from my dad’s effects when he died in 1993; a crème Pentel PF335, now known as a Pentel PF335 for Film, Generation 5. I kept these pencils over the years and in 2009, I got interested again in mechanical pencils in all their varieties, and started purchasing different brands; Pentel (of course), Rotring, Staedtler, Pilot, Platinum, etc.

By the end of 2010, I had focused my collecting down to just the P200 family of pencils, since at that time Pentel decided to start releasing different colors of the P200 series, starting with the 4 Marble P205 pencils.

Beginning with those two pencils from my dad, my collection has grown to 217 unique Pentel manufactured pencils, plus 14 that are custom pencils with P200 cores to them, and one with a P225 core. And there are still pencils out there that I know about that I do not have.

Jimmy Simpson

9/28/2018

Case 1 - Travel-Display Case

Top

9/28/2018


Bottom

9/28/2018


1P205A Black [None]Tip: 0.5mm Fixed (2mm) Clip: InitialInner Body: Beveled Brass Cap Cap: Standard Cap with Inner Plastic StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides

Cutout: P205 JAPAN 3Gen: 1

Released: 1970

1

Country (M/D): Japan / GlobalHard to screw tip onNotes:

146P205A Black [None]Print: 0.5 m/mTip: 0.5mm Fixed (2mm) Clip: Standard

Inner Body: Beveled Brass Cap Cap: Standard Cap with Inner Plastic StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides

Cutout: JAPAN 7Gen: 1b

Released: Circa 1970

2

Country (M/D): Japan / Global

166P205A Black [None]Molded: 0.5m/mTip: 0.5mm Fixed (2mm) Clip: Standard

Inner Body: Beveled Brass Cap Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides

Cutout: JAPAN 12Gen: 2

Released: Circa 1972-73

3


2P205A Black [None]Molded: 0.5m/mTip: 0.5mm Fixed (4mm) Clip: Standard




4


9/28/2018


5P205A Black (White) 0.5m/m Pentel P205Molded: 0.5m/mTip: 0.5mm Fixed (4mm) Clip: Standard




5


175P205A Black (White) 0.5m/m Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides



6


73P205A Black (White) 0.5m/m Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) w/ Pin Retainer: 12 Sides



7

Country (M/D): Japan / GlobalEarly in Production Run? Text is 4th Gen, but everything else says 5th Gen (outer body thickness, retainer, inner body, cap stop).

Notes:

6P205A Black (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) w/ Pin Retainer: 12 Sides



8


9/28/2018


7P205A Black (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides

Barcode Label: 3474372205009

Cutout: JAPAN B35Gen: 6


9

Country (M/D): Japan / GlobalRegistered Barcodes: 072512005422 (USA - GTIN12) \ 3474372205009 (France - GTIN13)

456P205D Green [None]Molded: 0.5m/mTip: 0.5mm Fixed (4mm) Clip: Standard




10


199P205D Green (White) 0.5m/m Pentel P205Molded: 0.5m/mTip: 0.5mm Fixed (4mm) Clip: Standard




11


75P205D Green (White) 0.5m/m Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides



12


159P205D Green (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



13


9/28/2018


23P205D Green (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides




14


521P205B Burgandy (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) w/ Pin Retainer: 12 Sides



15


22P205B Burgandy (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides




16


[None]17

289P205MB Red Marble (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2010

18


The outer body is molded white, then painted.

Registered Barcodes: 4902506077844 (Japan - GTIN13)Series: Marble Limited SeriesNotes:

9/28/2018


290P205MC Blue Marble (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2010

19




291P205MD Green Marble (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2010

20




292P205ME Brown Marble (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2010

21




53P205M-BX Red Metallic (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

22

Country (M/D): Japan / USA

Originally released in 2012. Re-released in 2016 with a new UPC and minor variation of color code: MBX vs. M-BX.

Registered Barcodes: 884851008237 (USA - GTIN12)Series: P205 MetallicsNotes:

9/28/2018


54P205M-CX Blue Metallic (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

23


Originally released in 2012. Re-released in 2016 with a new UPC and minor variation of color code: MCX vs. M-CX.


55P205M-DX Green Metallic (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

24


Originally released in 2012. Re-released in 2016 with a new UPC and minor variation of color code: MDX vs. M-DX.


59P205M-KX Light Green Metallic (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

25

Country (M/D): Japan / USARegistered Barcodes: 884851009944 (USA - GTIN12)

Series: P205 Metallics

60P205M-K1X Mint Green Metallic (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

26



9/28/2018


56P205M-PX Pink Metallic (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

27



61P205M-P1X Rose Pink Metallic (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

28



62P205M-SX Sky Blue Metallic (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

29



63P205M-VX Violet Metallic (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

30


Originally released in 2012.Re-released in 2016 with a new UPC and minor variation of color code: MVX vs. M-VX.


9/28/2018


65P205M-YX Rose Gold Metallic (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2014

31



64P205-WX White (Green) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides

Barcode Label:


Released: 2012

32



57P205M-X Gold (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

33



58P205M-Z Silver (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2012

34



9/28/2018


137P205M-X50 Gold (Black) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2015

35


Released for 50th Anniversary of Pentel America.Do not know the official color code; this is one I assigned.

Series: P205 MetallicsNotes:

Released as P205 Blister Pack with Bonus Pencil - 50th Anniversary of Pentel America (P205BP2F[04490]) with 2x P205A (201

239P205MNX Metallic Graphite (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

36


Series: P205 MetallicsReleased as P205 3-Pack (P205MBP3M[26579]) with P205MNX & P205MZX (2016)

238P205MZX Silver (Black) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

37


Series: P205 MetallicsReleased as P205 3-Pack (P205MBP3M[26579]) with 2x P205MNX (2016)

[None]38

66P205-GA Carbon Fiber (White) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2013

39

Country (M/D): Japan / SwitzerlandRegistered Barcodes: 3474372050609 (France - GTIN13)

9/28/2018


532P205-MN Metallic Graphite [None]Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides



Released: 2016

40


299P205-MTA Matt Black [None]Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

41


302P205-WN White [None]Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2014

42

Country (M/D): Japan / SwitzerlandRegistered Barcodes: 7610924040155 (Switzerland - GTIN13)

[None]43

87P205-XAL5 Black (Gold) 0.5mm Pentel P205Tip: 0.5mm Fixed Gold Clip: Standard GoldInner Body: Molded Plastic Body with Molded Cap Stop Cap: Gold CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

44


Released in a gift box.

Registered Barcodes: 884851023438 (USA - GTIN12)Series: Gilded SeriesNotes:

9/28/2018


90P205-XBL5 Red (Gold) 0.5mm Pentel P205Tip: 0.5mm Fixed Gold Clip: Standard GoldInner Body: Molded Plastic Body with Molded Cap Stop Cap: Gold CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

45




89P205-XCL5 Dark Blue (Gold) 0.5mm Pentel P205Tip: 0.5mm Fixed Gold Clip: Standard GoldInner Body: Molded Plastic Body with Molded Cap Stop Cap: Gold CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

46




91P205-XVL5 Violet (Gold) 0.5mm Pentel P205Tip: 0.5mm Fixed Gold Clip: Standard GoldInner Body: Molded Plastic Body with Molded Cap Stop Cap: Gold CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

47




88P205-XWL5 White (Gold) 0.5mm Pentel P205Tip: 0.5mm Fixed Gold Clip: Standard GoldInner Body: Molded Plastic Body with Molded Cap Stop Cap: Gold CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

48




9/28/2018


Top

9/28/2018


Bottom

9/28/2018


117P205-BSG Red (White) 0.5mm PentelTip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2013

1

Country (M/D): Japan / Singapore

Exclusive to Singapore.Series: Singapore Limited EditionNotes:

118P205-CSG Blue (White) 0.5mm PentelTip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2013

2



119P205-GSG Yellow (Red) 0.5mm PentelTip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2013

3



120P205-PSG Pink (Red) 0.5mm PentelTip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2013

4


Originally released in Singapore as P205-PSG, it was subsequently released in Canada (June 7, 2016) in conjunction with The Breast Cancer Research Foundation as P205P.

Series: Singapore Limited EditionNotes:

9/28/2018


121P205-WSG White (Red) 0.5mm PentelTip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2013

5


Originally released in Singapore as P205-WSG, it was subsequently released in Canada as P205-W in package P205BP2 with a P205A.

Series: Singapore Limited EditionNotes:

Released as P205 Black & White Pack (P205BP2) with P205A (2016)

[None]6

263P205-Z Silver [None]Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

7


Series: Metallics Limited Edition

[None]8

505P205-FB Red Flourescent (Silver) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2017

9

Country (M/D): Japan / Australia

Released by Pentel Australia.The outer body is molded white, then painted.

Registered Barcodes: 3474372050067 (France - GTIN13)Series: Neon Limited EditionNotes:

9/28/2018


255P205-FF Orange Flourescent (Silver) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

10

Country (M/D): Japan / Switzerland

Released by Pentel Switzerland, then later in Australia.The outer body is molded white, then painted.


256P205-FG Yellow Flourescent (Silver) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

11




257P205-FK Light Green Flourescent (Silver) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

12




9/28/2018


258P205-FP Pink Flourescent (Silver) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

13




[None]14

205P205-RA Retro Black (Silver) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

15


Released by Pentel Switzerland.The outer body is molded white, painted, then worn on the edges.

Registered Barcodes: 3474372150019 (France - GTIN13)Series: Vintage Limited EditionNotes:

206P205-RB Retro Red (Silver) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: JAPAN B4?Gen: 6

Released: 2016

16


Released by Pentel Switzerland.The outer body is molded white, painted, then worn on the edges.The Mark looks like it is just a 4, but I can just barely make out a leading "B", but with the "wearing", only the 4 stands out.


9/28/2018


207P205-RC Retro Blue (Silver) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

17




208P205-RE Retro Brown (Silver) 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

18




[None]19

195P205BG-C Navy (White) Automatic Pencil P200 0.5 P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

20

Country (M/D): Japan / Japan

Exclusive to Japan. Inner Body is White.

Registered Barcodes: 4902506333957 (Japan - GTIN13)Series: P200 for BOYS & GIRLSNotes:

9/28/2018


191P205BG-P Coral Pink (Red) Automatic Pencil P200 0.5 P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

21




192P205BG-P2 Baby Pink (Blue) Automatic Pencil P200 0.5 P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

22




194P205BG-S Serenity Blue (White) Automatic Pencil P200 0.5 P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

23




193P205BG-W Off-White (Blue) Automatic Pencil P200 0.5 P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

24




9/28/2018


757P205-BMPB Navy (White) P200 Boys & Girls 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 2Gen: 6

Released: 2018

25

Country (M/D): Brazil / Brazil

Exclusive to Brazil.

Registered Barcodes: 7898419167123 (Brazil - GTIN13)Series: P200 for BOYS & GIRLS (Brazil)Notes:

781P205-CWPB Off-White (Blue) P200 Boys & Girls 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 2Gen: 6

Released: 2018

26




775P205-LBPB Serenity Blue (Blue) P200 Boys & Girls 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 2Gen: 6

Released: 2018

27




763P205-LPPB Baby Pink (Blue) P200 Boys & Girls 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 2Gen: 6

Released: 2018

28




9/28/2018


769P205-SAPB Coral Pink (Blue) P200 Boys & Girls 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 2Gen: 6

Released: 2018

29






Cutout: 8Gen: 6

Released: 2018

30






Cutout: 8Gen: 6

Released: 2018

31






Cutout: 8Gen: 6

Released: 2018

32




9/28/2018




Cutout: 8Gen: 6

Released: 2018

33






Cutout: 8Gen: 6

Released: 2018

34






Cutout: 2Gen: 6

Released: 2018

35






Cutout: 4Gen: 6

Released: 2018

36




9/28/2018




Cutout: 2Gen: 6

Released: 2018

37






Cutout: 2Gen: 6

Released: 2018

38






Cutout: 2Gen: 6

Released: 2018

39




[None]40

639P203CL-E Nude Brown (Brown) P203 for Clena 0.3Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2018

41

Country (M/D): Japan / JapanRegistered Barcodes: 4902506357304 (Japan - GTIN13)

Series: P200 for Clena

9/28/2018


651P203CL-P Sheer Pink (Pink) P203 for Clena 0.3Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2018

42



663P203CL-S Clear Blue (Blue) P203 for Clena 0.3Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2018

43



675P203CL-W Silky White (Gold) P203 for Clena 0.3Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2018

44



687P205CL-E Nude Brown (Brown) P205 for Clena 0.5Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2018

45



9/28/2018


703P205CL-P Sheer Pink (Pink) P205 for Clena 0.5Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2018

46



719P205CL-S Clear Blue (Blue) P205 for Clena 0.5Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2018

47



735P205CL-W Silky White (Gold) P205 for Clena 0.5Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop (White) Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2018

48



9/28/2018


Top

9/28/2018


Bottom

9/28/2018


74P203E Brown (White) 0.3m/m Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides



1


8P203E Brown (White) 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 12 Sides

Cutout: JAPAN 30Gen: 4.5


2


9P203E Brown (White) 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) w/ Pin Retainer: 12 Sides


Cutout: JAPAN K14Gen: 6


3


Darker Brown than previous generations.Registered Barcodes: 3474372203005 (France - GTIN13)

Notes:

[None]4

9/28/2018


856P207C Blue [None]Tip: 0.7mm Fixed (2mm) Clip: InitialInner Body: Beveled Brass Cap (Blue) Cap: Standard Cap with Inner Plastic StandoffEraser: Z2-1 (Green) Retainer: 6 Sides

Cutout: P205 JAPAN 6Gen: 1

Released: 1970

5

Country (M/D): Japan / GlobalI see no trace of anything printed on the bottom of the pencil, but it could be a Gen 1a with the printing wiped off. I lean towards Gen 1 due to the presence of the Initial Clip with Pentel down the clip.Blue Inner Body.

Notes:

10P207C Blue [None]Print: 0.7 m/mTip: 0.7mm Fixed (2mm) Clip: Standard

Inner Body: Beveled Brass Cap (Blue) Cap: Standard Cap with Inner Plastic StandoffEraser: Z2-1 (Green) Retainer: 6 Sides

Cutout: P205 JAPAN 6Gen: 1a


6

Country (M/D): Japan / GlobalBlue Inner Body.Spring is Blue.

Notes:

540P207C Blue [None]Print: 0.7 m/mTip: 0.7mm Fixed (2mm) Clip: Standard

Inner Body: Beveled Brass Cap Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) Retainer: 6 Sides



7


9/28/2018


534P207C Blue [None]Molded: 0.7m/mTip: 0.7mm Fixed (2mm) Clip: Standard


Cutout: JAPAN A5Gen: 2


8


229P207C Blue [None]Molded: 0.7m/mTip: 0.7mm Fixed (4mm) Clip: Standard

Inner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) Retainer: 6 Sides



9


11P207C Blue (White) 0.7m/m Pentel P207Molded: 0.7m/mTip: 0.7mm Fixed (4mm) Clip: Standard

Inner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) Retainer: 6 Sides



10


158P207C Blue (White) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



11


12P207C Blue (White) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides




12


9/28/2018


107P207C Blue (White) 0.7mm Pentel P207Molded: 0.7m/mTip: 0.7mm Fixed (4mm) Clip: Standard

Inner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) Retainer: 12 Sides

Cutout: JAPAN A2Gen: xx

Released:

13

Country (M/D): Japan / Counterfeit? Has 5th-6th Gen printing & Inner Body with 2nd-3rd Gen Bottom Imprint & Cutout Mark. Outside of Outer Body uses a Gen 2/3 Mold, while the inside of Outer Body uses a Gen 5/6 Mold.

Notes:

[None]14

101P207M-KX Light Green Metallic (White) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2016

15

Country (M/D): Japan / USASeries: P207 Metallics

Released as P207 2-Pack (P207MBP2[26225]) with P207M-SX (2016)

Released as P207 Pencil & Lead Blister (v2) (P207MLBPT[26248]) Includes 12-pack of HB Lead (2017)

Released as P207 Single Blister Pack (P207MBPM[26155]) (2016)

Released as P207 3-Pack (P207MBP3M1[26195]) with P207M-P1X & P207M-SX (2016)


139P207M-K1X Mint Green Metallic (White) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2016

16


Originally released in 2016.Re-released in 2018 with an individual UPC and minor variation of color code: M-K1X vs. MK1.




9/28/2018


138P207M-PX Pink Metallic (White) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2016

17

Country (M/D): Japan / USASeries: P207 Metallics



103P207M-P1X Rose Pink Metallic (White) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2016

18


Originally released in 2016.Re-released in 2018 with an individual UPC and minor variation of color code: M-P1X vs. MP1.


Released as P207 3-Pack (P207MBP3M1[26195]) with P207M-SX & P207M-KX (2016)


Released as P207 2-Pack (P207MBP2[26225]) with P207M-YX (2016)



102P207M-SX Sky Blue Metallic (White) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2016

19


Originally released in 2016.Re-released in 2018 with an individual UPC and minor variation of color code: M-SX vs. MS.


Released as P207 2-Pack (P207MBP2[26225]) with P207M-KX (2016)

Released as P207 3-Pack (P207MBP3M1[26195]) with P207M-P1X & P207M-KX (2016)



Released as P207 Pencil, Lead & Erasers Blister (P207MLEBP[26190]) Includes 12-pack of HB Lead + 2 Short Replacement Eras


9/28/2018


115P207M-YX Rose Gold Metallic (White) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2016

20


Originally released in 2016.Re-released in 2018 with an individual UPC and minor variation of color code: M-YX vs. MY.



Released as P207 2-Pack (P207MBP2[26225]) with P207M-P1X (2016)



Released as P207 3-Pack (P207MBP3M[26194]) with P207Z & P207MN (2016)


108P207MN Metallic Graphite (White) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

21


Series: P207 MetallicsReleased as P207 2-Pack (P207MBP2[26225]) with P207Z (2016)

Released as P207 3-Pack (P207MBP3M[26194]) with P207Z & P207M-YX (2016)



307P207Z Silver (Black) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

22


Series: P207 MetallicsReleased as P207 3-Pack (P207MBP3M[26194]) with P207M-YX & P207MN (2016)


Released as P207 2-Pack (P207MBP2[26225]) with P207MN (2016)


9/28/2018


264P207-GA Carbon Fiber (Silver) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2013

23


266P207-MTA Matt Black (Silver) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2016

24


633P209G Yellow [None]Print: 0.9 m/mTip: 0.9mm Fixed (2mm) Clip: Standard




25

Country (M/D): Japan / GlobalLooks pristine, like it has never been usedNotes:

133P209G Yellow [None]Print: 0.9 m/mTip: 0.9mm Fixed (4mm) Clip: Standard




26


9/28/2018


13P209G Yellow (White) 0.9m/m Pentel P209Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) Retainer: 6 Sides



27


458P209G Yellow (White) 0.9mm Pentel P209Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) Retainer: 12 Sides



28


148P209G Yellow (White) 0.9mm Pentel P209Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) Retainer: 12 Sides



29


14P209G Yellow (White) 0.9mm Pentel P209Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides




30


[None]31

9/28/2018


68P209-P Cherry Pink (White) Pentel P209 0.9Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2014

32


Exclusive to Japan.Series: KirariNotes:

Released as XP209 Pink Single Pack (XP209-P) (2014)

67P209-V Mauve (White) Pentel P209 0.9Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2014

33



Released as XP209 Violet Single Pack (XP209-V) (2014)

69P209-X Gold (White) Pentel P209 0.9Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2014

34



Released as XP209 Gold Single Pack (XP209-X) (2014)

411P209M-KX Metallic Blue Green (White) 0.9mm Pentel P209Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2017

35



9/28/2018


412P209M-NX Metallic Graphite (White) 0.9mm Pentel P209Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2017

36


Series: P209 MetallicsReleased as P209 Single Blister Pack (P209MBPM[26603]) (2017)

413P209M-PX Metallic Pink (White) 0.9mm Pentel P209Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2017

37



414P209M-ZX Silver (Black) 0.9mm Pentel P209Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2017

38



[None]39

34P215A Black (Gray) 0.5mm Pentel P215Tip: 0.5mm Fixed (4mm) Clip: Short CarryInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) w/ Pin Retainer: 12 Sides

Cutout: JAPAN P1Gen: 5


40


9/28/2018


38P217C Blue (Gray) 0.7mm Pentel P217Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) Retainer: 12 Sides



41


40P219G Yellow (Gray) 0.9mm Pentel P219Tip: 0.9mm Fixed (4mm) Clip: Short CarryInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) Retainer: 12 Sides



42


35P215N Gray (White) 0.5mm Pentel P215Tip: 0.5mm Fixed (4mm) Clip: Short CarryInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



43


39P217C Dark Blue (White) 0.7mm Pentel P217Tip: 0.7mm Fixed (4mm) Clip: Short CarryInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



44


41P219B Red (White) 0.9mm Pentel P219Tip: 0.9mm Fixed (4mm) Clip: Short CarryInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



45


[None]46

[None]47

[None]48

9/28/2018


Top

9/28/2018


Bottom

9/28/2018


25P303S-AW White (Black) STEIN x Design / Tshirts / Store / graniph .3Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2011

1


Series: Stein Design

27P303S-CW White (Blue) STEIN x Design / Tshirts / Store / graniph .3Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2011

2



28P303S-DW White (Green) STEIN x Design / Tshirts / Store / graniph .3Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2011

3



30P303S-FW White (Orange) STEIN x Design / Tshirts / Store / graniph .3Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2011

4



9/28/2018


31P303S-PW White (Pink) STEIN x Design / Tshirts / Store / graniph .3Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2011

5



528P305S-AW White (Black) STEIN x Design / Tshirts / Store / graniph .5Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Released: 2011

6



636P305S-CW White (Blue) STEIN x Design / Tshirts / Store / graniph .5Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2011

7



637P305S-DW White (Green) STEIN x Design / Tshirts / Store / graniph .5Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2011

8



[None]9

9/28/2018


638P305S-PW White (Pink) STEIN x Design / Tshirts / Store / graniph .5Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2011

10



[None]11

109P323E Brown (White) 0.3m/m Pentel P323Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides

Price Label: Large Triangle Price Sticker (Green - ¥500)



12


110P323E Brown (White) 0.3mm Pentel P323Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 12 Sides




13


42P323E Brown (White) <Italic>0.3mm</Italic> P323Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 12 Sides

Price Label: Rectangle Price Sticker (Green - ¥500)



14


9/28/2018


479P325A Black (White) <Italic>0.5mm</Italic> P325Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) w/ Pin Retainer: 12 Sides

Price Label: Rectangle Price Sticker (Silver - ¥500)



15


480P327C Blue (White) <Italic>0.7mm</Italic> P327Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) Retainer: 12 Sides

Price Label: Rectangle Price Sticker (Blue - ¥500)



16


518P329G Yellow (White) <Italic>0.9mm</Italic> P329Tip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) Retainer: 12 Sides

Price Label: Rectangle Price Sticker (Yellow - ¥500)



17


43P327A Black [None]Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) Retainer: 12 Sides

Price Label: Large Triangle Price Sticker (Blue - ¥500)



18


[None]19

181P533A Black (White) 0.3m/m • P533Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides

Price Label: Small Triangle Price Sticker (Green - ¥500)



20


9/28/2018


104P533A Black (White) 0.3m/m Pentel P533Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides




21


[None]22

481PF335 Crème [None]Molded: 0.5m/mTip: 0.5mm Sliding Sleeve Clip: Standard




23


209PF335 Crème (Brown) 0.5m/m PF335 For FILMMolded: 0.5m/mTip: 0.5mm Sliding Sleeve Clip: Standard

Inner Body: Beveled Brass Cap Cap: Standard Cap with Inner Metal StandoffEraser: Rubber Stopper w/ Pin Retainer: 6 Sides



24

Country (M/D): Japan / GlobalInner retainer is worn out. Inner body spins when seated. Chrome plating is flaking off the clip.Notes:

483PF335 Crème (Dark Red) 0.5m/m PF335 For FILMTip: 0.5mm Sliding Sleeve Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Rubber Stopper w/ Pin Retainer: 6 Sides



25


15PF335 Crème (Brown) 0.5m/m PF335 For FILMTip: 0.5mm Sliding Sleeve Clip: StandardInner Body: Beveled Brass Cap Cap: Standard Cap with Inner Metal StandoffEraser: Rubber Stopper w/ Pin Retainer: 6 Sides



26


9/28/2018


17PF335 Crème (Brown) 0.5mm Pentel PF335 For FilmTip: 0.5mm Sliding Sleeve Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Rubber Stopper w/ Pin Retainer: 12 Sides



27

Country (M/D): Japan / GlobalThreads on tip have cutouts on both sidesNotes:

18PF337 Crème (Blue) 0.7m/m PF337 For FILMTip: 0.7mm Sliding Sleeve Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Rubber Stopper Retainer: 6 Sides



28

Country (M/D): Japan / GlobalSpring is BlueNotes:

19PF337 Crème (Blue) 0.7mm Pentel PF337 For FilmTip: 0.7mm Sliding Sleeve Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Rubber Stopper Retainer: 12 Sides



29


168PF337 Crème (Blue) 0.7mm Pentel PF337 For FilmTip: 0.7mm Sliding Sleeve Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Rubber Stopper Retainer: 12 Sides



30


20PF339 Crème (Orange) 0.9m/m PF339 For FILMTip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Beveled Brass Cap Cap: Standard Cap with Inner Metal StandoffEraser: Rubber Stopper Retainer: 6 Sides



31


9/28/2018


21PF339 Crème (Orange) 0.9mm Pentel PF339 For FilmTip: 0.9mm Fixed (4mm) Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Rubber Stopper Retainer: 12 Sides



32


[None]33

44PS315N Gray (White) 0.5m/m • PS315Molded: 0.5m/mTip: 0.5mm Sliding Sleeve Clip: Standard

Inner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides



34

Country (M/D): Japan / GlobalSpring is BlueNotes:

105PS315C Blue (White) 0.5m/m • PS315Tip: 0.5mm Sliding Sleeve Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides



35


45PS315C Blue (White) 0.5m/m Pentel PS315Tip: 0.5mm Sliding Sleeve Clip: StandardInner Body: Flat Brass Cap Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides



36


106PS315C Blue (White) 0.5mm Pentel PS315Tip: 0.5mm Sliding Sleeve Clip: StandardInner Body: Crimped Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (Green) w/ Pin Retainer: 12 Sides



37


9/28/2018


46PS315C Blue (White) 0.5mm Pentel PS315Tip: 0.5mm Sliding Sleeve Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



38


Body is darker blue than previous generations.Registered Barcodes: 072512006078 (USA - GTIN12) \ 3474371315006 (France - GTIN13)

Notes:

189PS523D Light Green (White) 0.3m/m • PS523Tip: 0.3mm Sliding Sleeve Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides



39


47PS523D Light Green (White) 0.3m/m Pentel PS523Tip: 0.3mm Sliding Sleeve Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 6 Sides



40


141PS523D Light Green (White) 0.3mm Pentel PS523Tip: 0.3mm Sliding Sleeve Clip: StandardInner Body: Flat Brass Cap, Crimped Cap: Standard Cap with Inner Metal StandoffEraser: Z2-1 (Green) w/ Pin Retainer: 12 Sides



41


[None]42

9/28/2018


360P205-FFPB Neon Orange (Black) Collection 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

43

Country (M/D): Japan / Brazil

Manufactured for and Sold exclusively in Brazil.The outer body is molded white, then painted.

Registered Barcodes: 7898419163750 (Brazil - GTIN13)Series: Collection Neon (Neon Orange)Notes:




Released: 2015

44







Released: 2016

45


Manufactured and Sold exclusively in Brazil.The outer body is molded white, then painted.


9/28/2018


357P205-FGPB Neon Yellow (Black) Collection 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2015

46



Registered Barcodes: 7898419163736 (Brazil - GTIN13)Series: Collection Neon (Neon Yellow)Notes:




Released: 2015

47






Cutout: 4Gen: 6

Released: 2016

48




9/28/2018


Top

9/28/2018


Bottom

9/28/2018


241P205-FPPB Neon Pink (Black) Collection 0.5mm Pentel P205Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 4Gen: 6

Released: 2016

1



Registered Barcodes: 7898419164719 (Brazil - GTIN13)Series: Collection Neon (Neon Pink)Notes:



Cutout: 5Gen: 6

Released: 2016

2






Cutout: 6Gen: 6

Released: 2016

3




[None]4

363P203-FRPB Ferarri Red (White) 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 8Gen: 6

Released: 2011

5


Manufactured and Sold exclusively in Brazil.

Registered Barcodes: 7898419157018 (Brazil - GTIN13)Series: Collection Colors (Ferarri Red)Notes:

9/28/2018




Cutout: 3Gen: 6

Released: 2011

6






Cutout: 2Gen: 6

Released: 2011

7






Cutout: 1Gen: 6

Released: 2011

8




385P203-LPB Lilac (White) 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 6Gen: 6

Released: 2014

9



Registered Barcodes: 7898419158848 (Brazil - GTIN13)Series: Collection Colors (Lilac)Notes:

9/28/2018




Cutout: 3Gen: 6

Released: 2014

10






Cutout: 3Gen: 6

Released: 2014

11






Cutout: 5Gen: 6

Released: 2014

12




367P203-MTAPB Matt Black (White) Collection 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2014

13


Manufactured for and Sold exclusively in Brazil.

Registered Barcodes: 7898419159302 (Brazil - GTIN13)Series: Collection Colors (Black)Notes:

9/28/2018





Released: 2014

14







Released: 2014

15







Released: 2014

16




393P203-PNPB Pink (White) 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides

Cutout: 5Gen: 6

Released: 2015

17



Registered Barcodes: 7898419162821 (Brazil - GTIN13)Series: Collection Colors (Pink)Notes:

9/28/2018



Cutout: 5Gen: 6

Released: 2015

18





Cutout: 5Gen: 6

Released: 2015

19





Cutout: 8Gen: 6

Released: 2015

20




389P203-PPB Light Pink (Black) 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 2Gen: 6

Released: 2011

21



Registered Barcodes: 7898419156998 (Brazil - GTIN13)Series: Collection Colors (LightPink)Notes:

9/28/2018




Cutout: 2Gen: 6

Released: 2011

22






Cutout: 7Gen: 6

Released: 2011

23






Cutout: 8Gen: 6

Released: 2011

24




371P203-WPB White (Black) 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 3Gen: 6

Released: 2011

25



Registered Barcodes: 7898419156974 (Brazil - GTIN13)Series: Collection Colors (White)Notes:

9/28/2018



Cutout: 4Gen: 6

Released: 2009

26




373P207-WPB White (Blue) 0.7mm Pentel P207Tip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 2Gen: 6

Released: 2010

27





Cutout: 7Gen: 6

Released: 2017

28






Cutout: 8Gen: 6

Released: 2011

29




9/28/2018


397P203-XPB Gold (Black) Collection 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides



Released: 2014

30



Registered Barcodes: 7898419159340 (Brazil - GTIN13)Series: Collection Colors (Gold)Notes:




Released: 2014

31





Cutout: 8Gen: 6

Released: 2014

32







Released: 2014

33




9/28/2018


92P203-ZPB Silver (Black) 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 3Gen: 6

Released: 2011

34



Registered Barcodes: 7898419156981 (Brazil - GTIN13)Series: Collection Colors (Silver)Notes:



Cutout: 8Gen: 6

Released: 2011

35






Cutout: 2Gen: 6

Released: 2011

36






Cutout: 7Gen: 6

Released: 2011

37




9/28/2018


565P205-40PB Red (White) P205 40 Anos 0.5mm PentelTip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 1Gen: 6

Released: 2010

38


Manufactured and Sold exclusively in Brazil (supposedly to dealers).

Registered Barcodes: 7898419154772 (Brazil - GTIN13)Series: 40 anos de Pentel P200Notes:

572P207-40PB Red (White) P207 40 Anos 0.7mm PentelTip: 0.7mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides

Cutout: 5Gen: 6

Released: 2010

39


Manufactured and Sold exclusively in Brazil (supposedly to dealers).

Registered Barcodes: 7898419154789 (Brazil - GTIN13)Series: 40 anos de Pentel P200Notes:

[None]40

401P203-DBPB Green (White) {Brazilian Flag} 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 4Gen: 6

Released: 2014

41


Released for the 2016 Summer Olympics in Rio.Manufactured and Sold exclusively in Brazil.

Registered Barcodes: 7898419161268 (Brazil - GTIN13)Series: Limitada Brasil (Green)Notes:

9/28/2018




Cutout: 5Gen: 6

Released: 2014

42






Cutout: 6Gen: 6

Released: 2014

43






Cutout: 6Gen: 6

Released: 2014

44




376P203-WBPB White (Green) {Brazilian Flag} 0.3mm Pentel P203Tip: 0.3mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Retainer: 12 Sides


Cutout: 5Gen: 6

Released: 2014

45



Registered Barcodes: 7898419161305 (Brazil - GTIN13)Series: Limitada Brasil (White)Notes:

9/28/2018




Cutout: 7Gen: 6

Released: 2014

46






Cutout: 5Gen: 6

Released: 2014

47






Cutout: 1Gen: 6

Released: 2014

48




9/28/2018

PenDisplay - 6-Pen Display Stand (91)Pencils not in the Display Case Collection, but uniquely identified.

484TURN-TOTC [Purpleheart] [None]Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2016

1

Country (M/D): USA / USASeries: Wood Turned Pencils

606TURN-TOTC [Honduras Rosewood] [None]Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2016

2


607TURN-TOTC [Cocobolo] [None]Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2016

3


608TURN-THOM [Teak] [None]Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2018

4


576TURN-ALTEN [Bloodwood] [None]Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2018

5


9/28/2018


609TURN-WTC [Zebra Wood] [None]Tip: 0.5mm Fixed (4mm) Clip: StandardInner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2018

6


9/28/2018


568SPOKE 1 Dot [Green] (N/A) ·Tip: 0.5mm Fixed (4mm)Inner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2012

1

Country (M/D): USA / USASeries: Spoke Pencils

569SPOKE Solid [Gray] (N/A) Spoke 6 ·Tip: 0.5mm Fixed (4mm)Inner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2013

2

Country (M/D): USA / USA

Limited Edition of less than 100.Series: Spoke PencilsNotes:

600SPOKE Inverse [Gray] (N/A) SPOKE 2013Tip: 0.5mm Fixed P225 Inner Body: P225 Cap: Standard CapEraser: Z2-1 (White) Released: 2013

3


This pencil was shorter and used the Pentel P225 guts.Series: Spoke PencilsNotes:

582SPOKE 2 Dot [Red] (N/A) ..Tip: 0.5mm Fixed (4mm)Inner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2013

4


9/28/2018


861SPOKE 3 Dot-PROTOTYPE [Aluminum] (N/A) …Tip: 0.5mm Fixed (4mm)Inner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2017

5


Prototype of the Spoke 3 Dot.Series: Spoke PencilsNotes:

570SPOKE 3 Dot [Titanium] (N/A) ···Tip: 0.5mm Fixed (4mm)Inner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2017

6


Limited Edition of 100 - Turned out to be harder to manufacture than Brian thought.Series: Spoke PencilsNotes:

571SPOKE 4 [Red/Black] (White) SPOKE 4 0.5mmTip: 0.5mm Fixed (4mm)Inner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2017

7


854SPOKE 5-2 [Storm Gray] (N/A) …..Tip: 0.5mm Fixed (4mm)Inner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2018

8


855SPOKE 5-3 [Aluminum] (N/A) …..Tip: 0.5mm Fixed (4mm)Inner Body: Molded Plastic Body with Molded Cap Stop Cap: Standard CapEraser: Z2-1 (White) Released: 2018

9


9/28/2018

Appendix A – Terminology

Cap – This is the (generally) silver cover that protects the eraser and that is pressed to extend more lead.

Cap Stop – This is the design feature that keeps the end of the cap from pushing all the way down to the Inner Body and pushing the eraser in too deep.

Clip – This is the spring-like metal piece that slides around the Outer Body at the cap end that allows the pencil to be “clipped” to thin items such as a pocket or pieces of paper. Generally contains markings on it that may help identify the Generation of the pencil. In my collection, I try to make sure all of these are lined up with the word “Pentel” in the Cutout, as the groove that is molded into the pencil is designed to hold the clip in this position.

Cutout – The lowered imprinted area covering 2 (of the 12) sides of the pencil just behind the Grip area.

Family – This term covers all of the pencils that share the same shape, internal mechanism and clip (given minor changes over generations).

Fixed Tip – This is a Pipe or Guide that is fixed in length and does not move, such as the standard Fixed 4mm Tip.

Generation – This is the term I use to date these pencils within a range of years based on the design of the components.

Grip – The section of the Outer Body that contains the eleven “rings” molded just behind the Tip.

Guide or Sleeve – This is the section of the tip that the lead comes out of. In drafting pencils such as the P200 series, it is designed so that the tip of the pencil does not interfere with your view of what you are working on and allows the pencil to be used with a straight edge without cutting into the lead. They are usually designated by length, such as a 2mm Guide.

Inner Body – This is the part of the pencil that is within the outer body and contains the lead and eraser, with the cap sliding onto it, covering the eraser

Mold Mark – The bottom right most number or letter and number in the Cutout, usually following the word “JAPAN”. Per Pentel, this is the Mold information. The number is the cavity in that mold, with the letter (if there is one), being the particular mold used.

Outer Body – This is the part of the pencil that is the primary grip area and contains most of the information to place the pencil within its generation.

Retainer – This is inside the Outer Body at the end where the Inner Body rests at the base of the tip. If you take the pencil apart and look inside (from the eraser end), you will see either a 6-sided hex, or a 12-pointed star at the end that the Inner Body’s hex shape locks into. This would be analogous to a wrench socket to the Inner Body’s bolt head.

Series – This is the group of pencils that share a common numbering. For example, the P200 Series includes all pencils whose numbers are P20# (with # being the mm designator) and would indicate the P203 / P205 / P207 / P209 pencils.

Sliding Sleeve – This is a Guide or Sleeve that will slide up into the pencil tip while you are writing, allowing a longer time between clicking out lead. The P200 Family Sliding Sleeves do not retract all the way into the tip, so cannot be considered pocket safe, but slide between 3mm and 5mm out.

Tip – This is the cone shaped end of the pencil that the lead comes out through the guide or sleeve.

Direction Definitions These definitions are based on the Clip being lined up with the word “Pentel” in the Cutout, and the pencil set down on a surface with the Clip on top, the Tip to the left and the Cap to the right.

Bottom – The side that is setting on the surface (per the directions above). This will be opposite the Cutout and is generally referring to the area just behind the Grip.

Front – The Tip end of the pencil.

Rear – The Cap end of the pencil.

Side or Text Area – I define this to be the large area that covers 2 (of the 12) sides of the pencil that are merged together, facing you per the directions above. On most P200 Family pencils, this is where the text is printed. When Side is used Upper Case, then it is referring to this definition, otherwise it is referring to one of the 12 sides of the pencil.

Top – The side with the word “Pentel” in the Cutout and the Clip.

Appendix B - P200 Family Components The descriptions of all of the items in this appendix come from my collection. There may be variations that I do not have, and do not show.

Body Body Top, showing cutout

Body Bottom, showing printed and molded sizes

Differences between Gen 1-4 & Gen 5-6 body thickness

Inner Body Retainer Slot Differences (looking from eraser end into the barrel)

The first component that’s generally noticed is the Body (or Outer Body). This is the primary component for determining generations. There are 6 different iterations of the Body, with a couple of minor variations.

First off, let’s look at what’s common on all versions of the Body. All of these Bodies consist of 12 sides with 2 of the sides combined down the middle length of the pencil (this is where the normal text appears on most of the pencils). Also, at the writing end, there are a series of 11 rings around the pencil to provide some grip, and a ridge right at the connection to the tip. They all have a slot cut out for the clip to fit into and stay in relatively the same place, although there is some play to this. There is also a “Cutout” that changes from pencil to pencil and through generations. All of these pencils have 2 lines of text on them, with the first line always (at least as far as I have found) being “Pentel”. The specifics of the text of the second line help define the iterations of the pencil.

Now to take a look at the changes that define the iterations of the Body.

Body 1 In the original Body, aside from the Cutout, there is no text on the body to identify the pencil. The second line of the Cutout says “P205 JAPAN #”, with the # being the Mold Mark. I suspect the Mark is the mold number, but I don’t know for sure. Looking inside the barrel from the eraser end to the tip end, you can see a “Retainer” slot with 6 corners that the Inner Body fits into to keep it from turning.

Body 1a This body is just a minor variation of Body 1. The only difference here is that on the bottom of the pencil, opposite the Cutout, is printed text defining the size of the lead, for example “0.7 m/m”. The Cutout still reads P205, even though in this example, it is a 0.7 m/m. This probably occurred in trying to get the other sizes to market before they redesigned the Cutout plate.

Body 1b This iteration is the same as 1a, with the size printed on the bottom, but by this point, they have redesigned the cutout to remove the “P205” from the mold.

Body 2 The change defining this body is that they removed the printed text from the bottom of the pencil, and it is now incorporated into the mold, so the “0.5m/m” is now raised print on the bottom of the pencil.

Body 3 This is where Pentel started to print on the side of the pencil in the area with the 2 combined sides. The size is listed as “0.5m/m” with the text on the side varying by pencil series.

Body 4 The change here is that Pentel removed the molded size from the bottom of the pencil. The text on the side generally remained the same, still using the “m/m” to denote millimeters.

Body 5 This was the first major revision of the body. At the very least they have a new inner mold for the pencil, since the wall of the body is now thinner and the “Retainer” slot now has 12 corners, making it quicker to seat the Inner Body. The text on the side of the pencil has now dropped the “/” in the millimeter and now reads “0.5 mm” along with the other identifiers.

Body 6 To the best of my knowledge, this is the current body of the pencils. The only difference I have found is the inclusion of a letter before the numbers in the Mold Mark in the Cutout. Of my pencils, 95% of them start with a B, with the other letters being K or P. All of the Limited Edition colors released after 2010 are of this body type.

Tip

The tip of the P200 family has 2 basic types: the fixed tip, and the sliding sleeve. I will address these tips by size, as there are different variants for most of them.

0.3 mm This size only has 2 variants that I have identified.

0.3 Fixed 4mm – this is the standard fixed tip with the 4mm guide.

0.3 Sliding Sleeve – this is the sliding sleeve with the guide that slides between 3mm & 5mm.

0.5mm The 0.5mm has the most variations of the tip for the P200 family.

0.5 Fixed 2mm – this was the original fixed tip that only had a 2mm guide.


0.5 Gold 4mm – this is the standard 4mm fixed tip with gold colored plating.


0.7mm The 0.7mm has almost as many variants as the 0.5mm.

0.7 Fixed 2mm – this was the original fixed tip that had a 2mm guide.



https://nimrodd.net/2017/03/11/p200-sharp-family/#fixed-tip

https://nimrodd.net/2017/03/11/p200-sharp-family/#sliding-sleeve

0.9mm There is only one tip two tips that I have identified for the 0.9mm.

0.9 Fixed 2mm – the original fixed tip that had a 2mm guide.

0.9 Fixed 4mm – this is the only size for the 0.9mmthis has the standard 4mm guide.

Clip

The clip on the P200 family comes off the pencil and rests in a channel that is molded into the body. Holding the pencil with the tip down, the clip should rest just to the left of the print area, lining up with the cutout.

There have been a few variations of the clip. I will describe the ones I know of below.

Standard Clip This is the clip that’s on all of the P203/P205/P207/P209 bodies that are sold in retail and on 90% of the pencils I have. This type of clip is sometimes referred to as a Deep Carry clip, since the clip comes out of the top of the band and thus sits deeper in a pocket.

Looking at the clip (with the tip down) straight on, the top of the clip portion looks like an arrow pointed down. On the band that holds the clip to the pencil, it says JAPAN on the left side and Pentel on the right.

A variant of this clip with a gold color was used on the Limited Edition Gilded Series P205’s that were released in 2016.

Initial Clip The standard clip is not the clip that was initially used on the first generation of P205 released. The shape of the clip is the same, just the text is laid out differently.

Initially, the band did not have any printing on it at all, and the word Pentel ran down the front of the clip.

Short Carry Clip This clip is a different layout from all of the above clips. The text on the band is the same as the standard clip (JAPAN / Pentel), but the clip comes out the bottom of the band, which makes the pencil sit with a shorter distance from the tip to where it would rest in a pocket (thus the Short Carry vs Deep Carry). As far as I know this clip was only used on some of the P215/P217/P219 bodies.

Cap

The cap of the pencil has not changed since 1970, when it was first introduced, other than the gold color on the Gilded Series P205’s. It is a single piece of metal that is press molded to form the cavity, and has an indention on one side that helps it grip and stay on the Inner Body.

The differences come in what I call the Cap Stop and how it relates to the Inner Body. The Cap Stop is what keeps the cap from pushing down on the eraser and down into the Inner Body where you can’t get it out.

When the P200 family was first released, the Cap Stop was in the top of the cap. When initially released, the Cap Stop in the cap was a plastic band that fit inside the cap and when pushed to advance the lead, would rest on the top of the Inner Body, keeping the eraser from being pushed down into the Inner Body.

After the initial release, a change was made to use a metal band in the cap for the same purpose. This metal band is the same band that goes around the eraser.

Later versions of the pencil did away with the Cap Stop in the cap, and now molded it into the Inner Body. These caps do not have anything inside them, but are otherwise the same design.

https://nimrodd.net/2017/03/11/p200-sharp-family/#cap-stop

Eraser

For around 30 years, the eraser in the P200 family was green. In the early 1990’s for the latest design change, Pentel made the decision to change to a white eraser.

The only variation from this, is not actually an eraser. The PF335/PF337/PF339 pencils were designed with a special lead to write on film, and this would not work with an eraser, so these just have a rubber stopper.

One additional thing about the 0.3mm and 0.5mm pencils, is that some of them came with a cleanout pin that was stuck into the bottom of the eraser. With one exception (a PF337 with rubber stopper), I don’t have any 0.7mm or 0.9mm pencils with this pin.

Inner Body

The Inner Body of the has changed incrementally over the lifetime of the P200 family. There have been 5 basic versions, with some minor variations; mostly color of the barrel. There are two areas that define these versions; the point where the spring meets the barrel, and the open end of the barrel.

Inner Body 1 – Beveled Brass Cap The front of the body where the spring sits is a brass cap that is beveled. The barrel is smooth from the front to the other end where the eraser fits.

Inner Body 2 – Crimped Flat Brass Cap The front of the body of this version also has a brass cap, but it is flat. Where it joins the barrel, the barrel is crimped. The rest of the barrel is smooth all the way to the back.

Inner Body 3 – Flat Brass Cap The only major difference between this body and Inner Body 2, is that it is not crimped. Like Inner Body 1, the brass cap is press-fit into the barrel.

Inner Body 4 – Crimped Plastic Body with Molded Cap Stop This is the first major revision of the Inner Body. The brass cap is no longer used, and the feed tube is crimped into the plastic body. The spring also rests on a narrow body of plastic that then enlarges to the main barrel. This barrel tapers from about 5.15mm to about 6.25mm at a lip that is 12.25mm from the end of the barrel, which is the new Cap Stop. After this lip, the barrel is about 5.85mm tapering down to about 5.65mm, allowing the cap to easily slide on and stop.

Inner Body 5 – Molded Plastic Body with Molded Cap Stop The only difference between this Inner Body and Inner Body 4 is that the feed tube is now molded into the body, not crimped. Again, the barrel tapers up to a Cap Stop, then a narrower section for the cap to rest in.

There were some variations in the colors some of these Inner Bodies were produced in, but otherwise they all match these.

Appendix C - P200, the Second Generation… and the third…and the fourth… and so on

When I first started to collect the P200 bodies, I saw that there were different molds and markings on the pencils. Along the way, I started to see the commonality and evolution of the pencils. As my collection grew larger, I started to codify the “Generations” of the pencils, and finally have settled on 6 different generations of P200 bodies, with 2 minor variation and one mixed generation.

I will go over different aspects and changes for each generation: External Body, Clip, Tip, Cap, Eraser, Inner Body.

One caveat; these observations are all based on observations from my pencil collection.

Generation 1 – Starting 1970

This covers the first P205 that was released back in 1970.

Outer Body The first thing that you notice (as opposed to the current version you see in the store), is that there is no text printed on the pencil at all. There is the smooth area (where the print goes on later pencils) between the cutout and the clip guide, but it is blank. In the cutout, it has the standard “Pentel” on the first line, but the second line shows “P205 JAPAN #”, with the # being the Mark. If you remove the inner body and look inside the body from the cap end to the tip end, you will see a Retainer Socket for the end of the inner body to sit in that has 6 sides.

Clip This is the initial clip that was used and is the same shape as the modern clip, but instead of having printing on the wrap around edges, they are blank, and the clip itself has “Pentel” running down it.

Tip This is the standard shape of the fixed tip, but it only has a 2mm sleeve instead of the current 4mm.

https://nimrodd.net/2017/03/11/p200-sharp-family/#cutout

https://nimrodd.net/2017/03/11/p200-sharp-family/#mark

https://nimrodd.net/2017/03/11/p200-sharp-family/#retainer

Cap The design of the metal cap itself has not changed in all of the generations. The difference here is that inside the cap is a plastic spacer that fits around the eraser when put on, but hits the edge of the inner body. This Cap Stop keeps the eraser from being hit by the end of the cap, and pushed into the inner body.

Eraser This generation originally came with a green eraser and had the cleanout pin stuck in the bottom of the eraser.

Inner Body This body is a smooth finish from the eraser section up to the beveled brass cap that the spring rests against. In front of that is the standard spring and grip mechanism that has not had any significant changes in all the generations.

https://nimrodd.net/2017/03/11/p200-sharp-family/#cap-stop

Generation 1a – Starting about 1970-1971

I classify this as a Generation 1 subclass, since they are still using the initial molds, which still included the P205 number in the Cutout. The changes to this generation were probably made due to releasing other sizes of the P200 series of pencils.

Outer Body The only change from Generation 1 is the addition of stamped text to the bottom of the pencil opposite the cutout. This text is simply the size in millimeters with a “/” between the 2 m’s; i.e. “0.7 m/m” for the P207, although that number is not anywhere to be found on the pencil at this point.

Clip On my example, they have already switched over to the standard clip with nothing on the clip itself and “Japan” on left wraparound and “Pentel” on right wraparound.

Tip No change: the tip is still a 2mm pipe.

Cap No change. This still has the plastic insert inside the metal cap.

Eraser Green with cleanout pin.

Inner Body Substantially, no change. The only one I have of this sub-generation is a P207C, and they molded the Inner Body in blue plastic instead of black.

Generation 1b – Starting about 1971

This is another Generation 1 subclass, as the only major change to it from Generation 1a, is that they no longer have the “P205” in the cutout.

Outer Body As I stated above, the change representing this sub-generation is dropping the “P205” from the cutout. It now just reads “JAPAN #” with the # being the mark.

Clip As above, now using the “Standard” clip.

Tip Still using the 2mm pipe on the smaller sizes, but the all most of the P209’s I have, have the standard 4mm pipe that the 0.9mm pencils all have.

Cap This is the other area with a change. They started replacing the plastic insert inside the cap with a metal insert that is also used around the eraser.

Eraser Green with or without cleanout pin.

Inner Body No change, except they are all black plastic.

Generation 2 – Starting between 1971-1972 as a best guess

This is the first major change to the P200 family.

Outer Body Here is where the major change happens that defines this generation. At this point, there is still nothing printed on the side of the pencil. The change is that Pentel stopped printing the size on the bottom of the pencil and the size is now molded into the bottom in the same location. Retainer Socket with 6 sides on the inside.

Clip Standard Clip

Tip All pencils are now starting to use the fixed 4mm pipe. I have one example that still uses the 2mm pipe.

Cap All caps now have the metal insert inside that stops the cap from sliding down too far.


Inner Body They all still have the smooth plastic body, but some are starting a changeover from the beveled brass spring base to a flat brass base that is crimped into the plastic body.

Generation 3 – Starting about 1975

The change that defines this generation is that Pentel started to print size and model number on the sides of the pencils.

At this point, it looks like Pentel started to release other models of pencils based on the P200 family, such as the PS315 and the PF330 series. This information and the date are from the cover of a 1975 German Pentel catalog that shows the P200 series still looking like Generation 2 (without print on the side), alongside the PS315 & PF330 series that now show printing on the side.

Outer Body The mold is still the same for the pencils, with the size molded into the bottom, but now with the addition of the printing on the side with the size (with “m/m”) and model number. Some of the pencils also print Pentel there as well. Retainer Socket with 6 sides on the inside.

Clip Standard Clip

Tip The P200 series still uses the 4mm fixed pipe, but Pentel has now introduced the Sliding Sleeve that is used on some pencils. It slides between 3mm and 5mm and will slide in as you write.

Cap Standard cap with metal insert


Inner Body Smooth plastic side with a mixture of the beveled brass and flat brass crimped base.

Generation 4 – Probably starting in the late 70’s

For this generation, Pentel dropped the molding of the size from the bottom of the pencils.

I don’t have a particular date that this started, but this generation went up to at least 1982, as that copy of the catalog still shows the m/m text on the pencils.

Outer Body Pentel removed the molded size information from the bottom of the pencils, probably to save a bit of money on plastic, since they now print the size on the side. The same text as generation 3 is printed on the side. Retainer Socket with 6 sides on the inside.

Clip Standard Clip

Tip Standard fixed 4mm pipe and sliding 3-5mm pipe.

Cap Standard cap with metal insert.


Inner Body Smooth plastic side with a mixture of the beveled brass, crimped flat brass and press-fit flat brass bases.

Generation 5 – Starting 1983 or 1984

This generation is where the major changes were made to the External and Inner Bodies.

Dating for the start of this generation comes from the 1982 and 1984 catalogs. In the 1982 catalog, they still show the Generation 4 pencils with the “m/m”, but in the 1984 catalog, they have changed to the now standard “mm”.

Outer Body

This was a major redesign of the pencil. Most obviously is the text where they dropped the “/” in the millimeter mark going from “m/m” to “mm”, probably to save ink. Less obvious, unless compared side by side is that the thickness of the wall of the body is thinner, again probably to save money on plastic. Another change on the inside is the Retainer Socket is now a 12 point star. This was probably done to make it easier to seat the inner body during assembly, and thus save time (which equals money). The cutout still reads “Pentel” on line 1 and “JAPAN ##” on line 2 with ## being an ID mark, the same as it has been since Generation 1b.

Clip

Same Standard Clip

Tip

Same standard fixed 4mm pipe and sliding 3-5mm pipe.

Cap

Here is a change associated with the change to the inner body. Since production began on the P200 family, the Cap Stop has been inside the cap, being either a metal insert or initially a plastic insert. This insert would “Stop” the cap from sliding in too far and pushing the eraser into the inner body. With generation 5, this insert was removed, which takes a step out of the production process, again saving time and material costs. The Cap Stop has now been shifted to the Inner Body.

Eraser

Green with or without cleanout pin.

Inner Body

There are two major changes to the inner body with this generation. At the tip end, the brass base has been removed, and the clutch tip is directly molded and crimped into the body. Then next change is on the eraser end, where there is now a molded lip that the cap “Stops” on.

My assumption is that all of these changes were made to either save material (ink, plastic, metal insert) or time (12 point vs 6 point Retainer Socket, no longer inserting the metal insert into the cap), which would cut down on costs to manufacture the pencil.

Generation 4.5 – Starting 1983 or 1984 – Concurrent with Generation 5

This generation is out of order, so that you see the changes that were introduced in Generation 5 before seeing this mixed generation.

When Pentel made the changeover to Generation 5, from what I can see they made the production cutover based on the 0.5mm & 0.9mm stock. What I mean by this is they had supplies to run up through the end of a year for the 0.5mm & 0.9mm and the next year started with Generation 5 for these sizes. But, they still had lots of Inner Bodies for the 0.3mm and some for the 0.7mm. So the 0.5mm and 0.9mm went straight to Gen 5, the 0.3mm went with the Gen 5 External Body, but the Gen 4 Internal Body. For the 0.7mm, they apparently had less stock of the Internal Bodies, so moved those to the smaller run pencils (P327 & PF337) and ran the P207 with the full Gen 5 bodies (External and Inner).

Outer Body (Gen 5)

Text uses the “mm” for millimeter. Wall of the pencil is thinner and it has the 12 point Retainer Socket.

Clip

Same Standard Clip

Tip

Same standard fixed 4mm pipe and sliding 3-5mm pipe.

Cap (Gen 4)

Standard Cap with metal insert.

Eraser

Green with or without cleanout pin.

Inner Body (Gen 4)

Smooth plastic side with the crimped flat brass bases.

Generation 6 – Starting 1992 to 1994 up to now

One minor change and a relatively major change define this generation.

Based on the copies of the 1991 and 1994 Pentel catalogs, I have narrowed down the beginning of this change to between 1992 and 1994 based on the change from the green erasers to the white erasers

Outer Body The minor change to the external body is in the cutout where the second line now reads “JAPAN A##”, where A## is the Mold Mark with A being a letter and ## being a digit. Retainer Socket is still 12 point.

Clip Same Standard Clip

Tip Same standard fixed 4mm pipe and sliding 3-5mm pipe.

Cap Standard Cap without any insert.

Eraser Pentel changed to a white eraser with this generation. Few pencils come with cleanout pins.

Inner Body The only real change here is that the attachment to the clutch tip is now molded without crimping for the most part.

Jimmy Simpson's · 9/28/2018 · Jimmy Simpson's Pentel P200 Family Collection As of September 28,...

Documents

Transcript of Jimmy Simpson's · 9/28/2018 · Jimmy Simpson's Pentel P200 Family Collection As of September 28,...