JetBlast™ Copper Slag Abrasive ::J • Slag AB.pdf · Copper Slag Abrasive Product Description...
2
::J • Pan Abrasives JetBlast™ Copper Slag Abrasive Product Description And Technical Data: JetBlast™ Copper Slag is a by-product produced in the manufacture of copper. During the smelting and quench- ing process, in the copper smelter, mineral slag is con- verted to Iron Silicate, thus producing raw copper slag. The raw copper slag is then processed, at up to 90 ton- nes per hour, to produce JetBlast™. JetBlast™ is produced from 100% raw copper slag, and is not mixed with recy- cled copper slag or tin slag. Additions of either of these two products can significantly increase levels of Radioac- tivity and Conductivity. Qj JetBlast™is a low cost expendable material suited for ~ open blast cleaning, and due to its low silica content does not pose the health hazards ~ created by silica sand. Its sharp, hard cutting edges provide a fast cleaning action and ~ excellent surface profile preparation. JetBlast™ is one of the most economical expend- ~ '" able abrasives available for cleaning steel surfaces where recovery and reuse are not ::: practical. 6 ~ Coarse grade JetBlast™ is used predominantly in shipyards for the removal of heavy ~ corrosion and coatings leaving a typical surface profile of up to 120 microns. Medium ":: grade JetBlast™ is used for cleaning mill scale and medium rust removal, creating typi- ::: cal surface profiles of 60 to 100 microns. Fine grade JetBlast™ is used on new steel to G remove mill scale and light rust resulting in a typical surface profile of 40 microns. For "0 low-end applications, where blasting cost is major factor, a general grade material is ~ available. b jetBlast™ Abrasive Properties: Shape Sharp, Angular Fe203 % Si02% Hardness (Moh 6-7 Scale) AI203% Bulk Density (kg/ 1900 Zn% m') CaO% Particle S.G. 3.4 Cu % Colour Shiny Black MgO% Ti02% Size Standard ASTM Free Silica % Conductivity < 25 ms/m lead % -ti RI 111 >45 Tin% 0.08 ll:l '" '" > 31 Antimony % 0.07 '" \3 >4 Chromium % 0.02 111 "0 < 1 Cobalt % 0.02 ')( 0 <7 Nickel % 0.02 E .~ :: < 1 Cadmium % 0.004 E ::I > l,S Arsenic Not Detected ~ , - <2 Beryllium Not Detected Qj .c <1 Trace Elements % ~ <0.5 :::l ~ 0.1 Moisture % <1 .!!1 "0 111 ~ ~ '" ~ 06-28-001
Transcript of JetBlast™ Copper Slag Abrasive ::J • Slag AB.pdf · Copper Slag Abrasive Product Description...
::J •Pan Abrasives
JetBlast™Copper Slag Abrasive
Product Description And Technical Data:
JetBlast™ Copper Slag is a by-product produced in themanufacture of copper. During the smelting and quench-ing process, in the copper smelter, mineral slag is con-verted to Iron Silicate, thus producing raw copper slag.The raw copper slag is then processed, at up to 90 ton-nes per hour, to produce JetBlast™. JetBlast™ is producedfrom 100% raw copper slag, and is not mixed with recy-cled copper slag or tin slag. Additions of either of thesetwo products can significantly increase levels of Radioac-tivity and Conductivity.
Qj
JetBlast™ is a low cost expendable material suited for ~open blast cleaning, and due to its low silica content does not pose the health hazards ~created by silica sand. Its sharp, hard cutting edges provide a fast cleaning action and ~excellent surface profile preparation. JetBlast™ is one of the most economical expend- ~
'"able abrasives available for cleaning steel surfaces where recovery and reuse are not :::practical. 6
~Coarse grade JetBlast™ is used predominantly in shipyards for the removal of heavy ~
corrosion and coatings leaving a typical surface profile of up to 120 microns. Medium "::grade JetBlast™ is used for cleaning mill scale and medium rust removal, creating typi- :::cal surface profiles of 60 to 100 microns. Fine grade JetBlast™ is used on new steel to Gremove mill scale and light rust resulting in a typical surface profile of 40 microns. For "0
low-end applications, where blasting cost is major factor, a general grade material is ~available. bjetBlast™ Abrasive Properties:
Shape Sharp, Angular Fe203 %
Si02%Hardness (Moh 6-7Scale) AI203%
Bulk Density (kg/ 1900 Zn%m')
CaO%Particle S.G. 3.4
Cu %
Colour Shiny Black MgO%
Ti02%Size Standard ASTM
Free Silica %
Conductivity < 25 ms/m lead %
-tiRI111
> 45 Tin% 0.08 ll:l
'"'"> 31 Antimony % 0.07 '"\3>4 Chromium % 0.02 111
"0
< 1 Cobalt % 0.02')(0
<7 Nickel % 0.02 E.~::
< 1 Cadmium % 0.004 E::I> l,S Arsenic Not Detected ~,-<2 Beryllium Not Detected Qj
.c
< 1 Trace Elements %~
<0.5 :::l~
0.1 Moisture % <1 .!!1"0
111
~~'"~
06-28-001
•..0~VI
G.Grade Q;CIJ•..VI
0-5000 IIIIIICIJ
0-0.195 C'i\j"l
III"t:lIIICIJco.!::!EIII•..CIJ\..i
•...0~VIQj
CIJ
"l•...'r:l)-CIJ
Q.I•..VI
c:~"t:l~'==~U•..CIJ
EIIIl)
'"IIIl\l
'G"t:l
OJ..c:'"::lbIII"t:lIIIl1JcoIIIIII
.!!!\.J
Stock Code
Key XXXX - Product grade (e.g. 8/30, XXXX=0830)
XXXX - ROOOOor ROOO1 when product recycled
yy - product weight (e.g. 2T, YY = 20)
YY - 00 when packing in bulk or loose bags
ZZ - Packing
AO for BULK
BA for LOOSE BAGS
CP for BULK BAG
ex for JUNGLE BOX
DA for SHRINK WRAP
Pan Abrasives GroupAustralia· Ph. 613 9303 3801 • Fax. 613 9308 7933China' Ph. 8621 63178833 • Fax. 86 21 63179231Malaysia - Ph. 60356373822 - Fax. 603 56372822Singapore - Ph. 65 6861 6988 - Fax. 65 6861 0919
~ 'U1cH'VI i;. 'J1!J. :n ..Vi3-J41n~ 32/6 Vl~4 bl'W'W~I~t~n- L~'W1~lml'vhmm:; iillJ1'fl~I~t~n 4'~Vl'111ltl'VJ~fil;:J12160
~ P.Y.C. Team Co., Ltd. 32/6 Moo 4 Samkhok-Sena Rd.,T.Taykhao,A.Samkhok,Pathumthani 12160TEAM Tel: (662) 978-9120, 978-9126, 101-1453-5 Fax: (662) 978-8431
Website: www.pycteam.com Email: info~pycteam.com
www.pan-abrasives.comEmail [email protected]
