jerinv resume 1213 (1) (1)
Click here to load reader
-
Upload
jerin-varghese -
Category
Documents
-
view
18 -
download
2
Transcript of jerinv resume 1213 (1) (1)
Al Marqab, Al Batha,Riyadh11476,Saudi Arabia
(00966) 05728279220504247797.011-4577100
JERIN VARGHESEMECHANICAL ENGINEER
OBJECTIVES
Proven acumen to formulating evaluating a promising, successful andchallenging career in a reputed organization
Where my knowledge and skill can be effectively applied Enabling me to explore myself fully and realize my full potential. To work in a firm with a professional work driven environment where I
can utilize and apply my knowledge, skills which would enable me as afresh graduate to grow while fulfilling organizational goals.
WORK EXPERINCETHREE Years of working experience in oil refinery on industrialmaintenance of static equipment like Piping, Structures and HeatExchangers. Presently working as Junior Engineer under contract basis
EXPERIENCE DETAILSJUNIOR ENGINEER 2013 – 2014S.R.E. Engineering Works Vadodara, Gujarat, INDIA
A contract based company works under Indian Oil CorporationLimited, under takes project such as piping, structures, plant maintenance, heatexchangers, shutdown works etc.JUNIOR ENGINEER 2014 - 2016Matha Engineering Works Sangipuram, Gandidham, Gujarat
A contract based company works under Sangi Cement Factory, undertakes mechanical maintenance works, shutdown works.MECHANICAL ENGINEER 2016Greentech engineering Riyadh, SAUDI ARABIA
A company for boiler manufacturing and maintenance works
EDUCATION
Year Course Institution Score
2007- 2013Bachelor of Engineering
(Mechanical)SHREE DEVI INSTITUTEOF TECHNOLOY,MANGALORE
55%
2005 – 2007 HSE(Class XII)St.Jude H.S.S, Mukhathala,kollam, kerala
60%
2002- 2005 SSLCSt.Johns H.S.S, Karuvelil,Ezhukhone, Kollam,
78.32%
Al Marqab, Al Batha,Riyadh11476,Saudi Arabia
(00966) 05728279220504247797.011-4577100
JERIN VARGHESEMECHANICAL ENGINEER
OBJECTIVES
Proven acumen to formulating evaluating a promising, successful andchallenging career in a reputed organization
Where my knowledge and skill can be effectively applied Enabling me to explore myself fully and realize my full potential. To work in a firm with a professional work driven environment where I
can utilize and apply my knowledge, skills which would enable me as afresh graduate to grow while fulfilling organizational goals.
WORK EXPERINCETHREE Years of working experience in oil refinery on industrialmaintenance of static equipment like Piping, Structures and HeatExchangers. Presently working as Junior Engineer under contract basis
EXPERIENCE DETAILSJUNIOR ENGINEER 2013 – 2014S.R.E. Engineering Works Vadodara, Gujarat, INDIA
A contract based company works under Indian Oil CorporationLimited, under takes project such as piping, structures, plant maintenance, heatexchangers, shutdown works etc.JUNIOR ENGINEER 2014 - 2016Matha Engineering Works Sangipuram, Gandidham, Gujarat
A contract based company works under Sangi Cement Factory, undertakes mechanical maintenance works, shutdown works.MECHANICAL ENGINEER 2016Greentech engineering Riyadh, SAUDI ARABIA
A company for boiler manufacturing and maintenance works
EDUCATION
Year Course Institution Score
2007- 2013Bachelor of Engineering
(Mechanical)SHREE DEVI INSTITUTEOF TECHNOLOY,MANGALORE
55%
2005 – 2007 HSE(Class XII)St.Jude H.S.S, Mukhathala,kollam, kerala
60%
2002- 2005 SSLCSt.Johns H.S.S, Karuvelil,Ezhukhone, Kollam,
78.32%
Al Marqab, Al Batha,Riyadh11476,Saudi Arabia
(00966) 05728279220504247797.011-4577100
JERIN VARGHESEMECHANICAL ENGINEER
OBJECTIVES
Proven acumen to formulating evaluating a promising, successful andchallenging career in a reputed organization
Where my knowledge and skill can be effectively applied Enabling me to explore myself fully and realize my full potential. To work in a firm with a professional work driven environment where I
can utilize and apply my knowledge, skills which would enable me as afresh graduate to grow while fulfilling organizational goals.
WORK EXPERINCETHREE Years of working experience in oil refinery on industrialmaintenance of static equipment like Piping, Structures and HeatExchangers. Presently working as Junior Engineer under contract basis
EXPERIENCE DETAILSJUNIOR ENGINEER 2013 – 2014S.R.E. Engineering Works Vadodara, Gujarat, INDIA
A contract based company works under Indian Oil CorporationLimited, under takes project such as piping, structures, plant maintenance, heatexchangers, shutdown works etc.JUNIOR ENGINEER 2014 - 2016Matha Engineering Works Sangipuram, Gandidham, Gujarat
A contract based company works under Sangi Cement Factory, undertakes mechanical maintenance works, shutdown works.MECHANICAL ENGINEER 2016Greentech engineering Riyadh, SAUDI ARABIA
A company for boiler manufacturing and maintenance works
EDUCATION
Year Course Institution Score
2007- 2013Bachelor of Engineering
(Mechanical)SHREE DEVI INSTITUTEOF TECHNOLOY,MANGALORE
55%
2005 – 2007 HSE(Class XII)St.Jude H.S.S, Mukhathala,kollam, kerala
60%
2002- 2005 SSLCSt.Johns H.S.S, Karuvelil,Ezhukhone, Kollam,
78.32%
SKILLSPROFESSIONAL SKILLS
VESSEL: To supervise the inside cleaning of vessel, Demister pads andvortex breaker and buffing of weld joints, Hydro-test
PIPING: Maintenance of new NG line, ISO making of plan drawing,giving details to fitters about measurement and route plan etc.
DP-TEST & X-RAY TEST: To supervise and pre-check any chance forporosity in welding and informing the chief inspection officer
STRUCTURE: To supervise the fitt up giving plan drawing detailsclearing inspection etc.
HYDRO-TEST: To pre-check and examine the capacity of the pipe, anyleakage etc.
INSPECTION OF FITTUPS: To pre-check the fabricated fittups aboutthe gap maintenance and butt angle etc.
AUTO CAD: To make ISO drawing of plan drawings and createchecklist etc.
ERECTION: To give necessary details regarding pipe location,position, angle etc for erection
COMPRESSOR: Gained training and experience with vibrationmeasurement and laser alignment equipment. Developed a strongworking knowledge of pumps, blowers, hydraulic systems andpneumatic systems. Coordinated the repair and improvement of allwater utilities and related systems including: pumps, water softeners,and piping. Also maintained the waste water facility.
BOILER: To Install burners and other equipment, Experience indesigning, installing, and maintaining of boilers, Experience inmaintaining and operating pumps, compressors, and pressure gauges,Develop safety programs and maintenance procedures. Adjusted valvesand controllers and maintained boiler steam pressure, Ensured properoperation and distribution of pressure in the boilers, Inspected andadjusted the distribution systems and safety procedures, Performedbasic electrical and mechanical maintenance
CAREER SKILLS
Disciplined, dedicated and hard working with an ability to easilyadapt to changing work environment.
Keen learner with ability to learn and imbibe with new knowledge. Excellent communication and interpersonal skills. Good presentation skill Able to work independently/ Together in a team Confident and Determined
TECHNICAL SKILLS ANSYS SOLID EDGE AUTO CAD 2D, 3D WINDOWS OFFICE TOOLS INTERNET BROWSING
PROJECT“Design and Fabrication Of Intelligent Reverse Gear Braking System”
It is a genuine project which is fully equipped by IR sensorscircuit and Pneumatic breaking circuit. The “PNEUMATIC BRAKINGCIRCUIT” can stop the vehicle within 2 to 3 seconds runningAt a speed of 50 KM
College: Shree Devi Institute of Technology, MangaloreTeam size: 4Roles and responsibilities: Designing, Arrangement of Pneumatic BrakeSystem, Sensors, Brake Power
HOBBIES Music Reading books and Journals Writing Modeling Drawing Sporting
LANGUAGES
1. MALAYALAM
2. ENGLISH
3. HINDI
4. KANNADA
5. TAMIL
AREAS OF INTREST Power generation and distribution Manufacturing Automobile Engineering Design And Solutions
LANGUAGE Read Write Speak
TECHNICAL SKILLS ANSYS SOLID EDGE AUTO CAD 2D, 3D WINDOWS OFFICE TOOLS INTERNET BROWSING
PROJECT“Design and Fabrication Of Intelligent Reverse Gear Braking System”
It is a genuine project which is fully equipped by IR sensorscircuit and Pneumatic breaking circuit. The “PNEUMATIC BRAKINGCIRCUIT” can stop the vehicle within 2 to 3 seconds runningAt a speed of 50 KM
College: Shree Devi Institute of Technology, MangaloreTeam size: 4Roles and responsibilities: Designing, Arrangement of Pneumatic BrakeSystem, Sensors, Brake Power
HOBBIES Music Reading books and Journals Writing Modeling Drawing Sporting
LANGUAGES
1. MALAYALAM
2. ENGLISH
3. HINDI
4. KANNADA
5. TAMIL
AREAS OF INTREST Power generation and distribution Manufacturing Automobile Engineering Design And Solutions
LANGUAGE Read Write Speak
TECHNICAL SKILLS ANSYS SOLID EDGE AUTO CAD 2D, 3D WINDOWS OFFICE TOOLS INTERNET BROWSING
PROJECT“Design and Fabrication Of Intelligent Reverse Gear Braking System”
It is a genuine project which is fully equipped by IR sensorscircuit and Pneumatic breaking circuit. The “PNEUMATIC BRAKINGCIRCUIT” can stop the vehicle within 2 to 3 seconds runningAt a speed of 50 KM
College: Shree Devi Institute of Technology, MangaloreTeam size: 4Roles and responsibilities: Designing, Arrangement of Pneumatic BrakeSystem, Sensors, Brake Power
HOBBIES Music Reading books and Journals Writing Modeling Drawing Sporting
LANGUAGES
1. MALAYALAM
2. ENGLISH
3. HINDI
4. KANNADA
5. TAMIL
AREAS OF INTREST Power generation and distribution Manufacturing Automobile Engineering Design And Solutions
LANGUAGE Read Write Speak
SUMMARY
Junior mechanical engineer offering hands on experience in productionand maintenance in various industry with particular emphasis onmaterial properties, thermodynamics, fluid mechanics and software\
Good work ethics with excellent communication and interpersonal skillsExcellent Motivational, Leadership skills in a fast-paced environment
Expert in Solid edge, Ansys and AutoCAD Capable to delve into the new technical information quickly Wide knowledge of stress analysis, mechanics of materials and the
behavior of components. Sound knowledge of machines and tools. Experience in oil and gas field and knowledge about its safely working
environment. Got safety training several times while working in I.O.C.L Experience and knowledge in piping, erection, iso makng, weld
inspection, D.P test, hydro test, radiography test etc
PERSONAL DETAILS:
Name : Jerin Varghese
Date of Birth /Age : 16thApril 1989
Father’s Name : M Varghese
Permanent Address : Edenvilla, karuvelil(p.o), ezhukhoneKollam, Kerala, India– 691505India– 691505
Current Address : Al Marqaub, Al BathaAl Riyadh 11476,Saudi Arabia
IQAMA NO : 2406785226
Transferable IQAMA
Passport details
Passport Number : L3030840
Date of issue : 19/08/2013
Date of expiry : 18/08/2023
Nationality : INDIAN
Ph: 00966572827922, 00966504247797, 00966546160582
Email: [email protected]
Declaration
I hereby declare that the above-furnished details are true to the best of my knowledge.
JERIN VARGHESE