Janson TechSpecs PVC - Janson Capsules USA · 2019-01-29 · janson capsules usa ˜ a division of...
Transcript of Janson TechSpecs PVC - Janson Capsules USA · 2019-01-29 · janson capsules usa ˜ a division of...
T E C H N I C A L S P E C I F I C AT I O N S
• Heat-shrinkable polyvinyl chloride capsule• 0 to 4 venting holes possible on the top disc• Height between 45 mm and 75 mm*• 75 micons extruded PVC* Any other desired size shall be a subject for further study
P R I N T I N G C O L O R S & F I N I S H
• Rotogravure printing• Possibility to print up to 4 colors with di�erent �nishing touches: matte / shiny / glossy / pearly• Color-match research for any order from 50,000 capsules
* Colors are referred in Janson Capsules’ color chart
C U S T O M I Z AT I O N O P T I O N S
• Customization with rotogravure printing on skirt.
• Customization with hot-stamping or rotogravure printing
on top-disc
• 14 hot-stamping colors* on stock with metallic,
matte and shiny �nish
• Embossing on top-disc
• Tear tab location
* Colors are referred in Janson Capsules’ color chart
P R O D U C T Q U A L I T Y
• Quality procedures in place to control the product
appearance, the product functionality and the product size
• Materials certi�cate of conformity (available upon request)
• BPA free (certi�cate available upon request)
J A N S O N C A P S U L E S U S A - A D I V I S I O N O F J A N S O N C A P S U L E S G R O U P
W W W . J A N S O N C A P S U L E S U S A . C O M
T E C H N I C A L S P E C I F I C A T I O N
P V CC A P S U L E S
DIAMETER (MIN and MAX)29.6mm to 38.6mm
TAPER ANGLE (MIN and MAX)2 to 3.5 degrees
HEIG
HT (M
IN and M
AX
): 45m
m to 75 m
m