(IT ONTINUES ON THE AK OF THIS SHEET) P1 · pas1 ta le frame 2 pas2 seating frame 8 pas3 ta le ross...
2
WARNING: READ THE ASSEMBLY INSTRUCTIONS CAREFULY BEFORE ASSEMBLING THE AUSSIE SNACK BAR SETTING. Make sure to wear protecve gloves and foot protecon when installing and assembling this product. Unpack the unit and make sure all the components are included before proceeding. This acvity requires two or more people as liſting is involved. Please ensure bolts are only finger ghtened during the assembling process for flexibility in lining up components. Securely ghten the bolts before anchoring the Broad Sheltered Park Seng to the ground. AUSSIE SNACK BAR (CODE No. FELASBS) A. Lay the 3 table planks [PAS5] upside down on an even surface. Bolt the 2 table frames [PAS1] on to the table planks, by using hexagonal head bolts [PAS7] and locknuts [PAS9] - finger tighten. B. Install the table cross bars [PAS3] in between the table frames legs [PAS1] as shown, and secure them with hexagonal head bolts [PAS8], locknuts [PAS10] and plain washers [PAS11] - finger tighten. 1 ITEM DESCRIPTION QTY PAS1 TABLE FRAME 2 PAS2 SEATING FRAME 8 PAS3 TABLE CROSS BAR 2 PAS4 SEATING CROSS BAR 4 PAS5 2000 mm—SEATING PLANK 3 PAS6 900 mm.—SEATING PLANK 4 PAS7 M6X25 mm. HEXAGONAL HEAD BOLT 56 PAS8 M12x80 mm. HEXAGONAL HEAD BOLT 24 PAS9 M6 LOCKNUT 56 PAS10 M12 LOCKNUT 24 PAS11 M12 PLAIN WASHER 48 P1 (IT CONTINUES ON THE BACK OF THIS SHEET) [PAS3x2] [PAS11] [PAS9/10] [PAS8x2] [PAS1x2] [PAS7/8] [PAS2] [PAS1] [PAS3] [PAS4] Thank you for purchasing our high quality products. The Aussie Snack Bar Seng has been manufactured with cerfied materials to achieve high reliability and minimum mainte- nance. It is our commitment to provide cost—effecve soluons for outdoor applicaons. [PBS5/6] [PAS10x2] [PAS11x4] [PAS5x3]
Transcript of (IT ONTINUES ON THE AK OF THIS SHEET) P1 · pas1 ta le frame 2 pas2 seating frame 8 pas3 ta le ross...
WARNING: READ THE ASSEMBLY INSTRUCTIONS CAREFULY BEFORE ASSEMBLING THE AUSSIE SNACK BAR SETTING.
Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This activity requires two or more people as lifting is involved. Please ensure bolts are only finger tightened during the assembling
process for flexibility in lining up components. Securely tighten the bolts before anchoring the Broad Sheltered Park Setting to the ground.
AUSSIE SNACK BAR
(CODE No. FELASBS)
A. Lay the 3 table planks [PAS5] upside down on an even surface. Bolt the 2 table frames [PAS1] on to the table planks, by using hexagonal head bolts [PAS7] and locknuts [PAS9] - finger tighten.
B. Install the table cross bars [PAS3] in between the table frames legs [PAS1] as shown, and secure them with hexagonal head bolts [PAS8], locknuts [PAS10] and plain washers [PAS11] - finger tighten.
1
ITEM DESCRIPTION QTY
PAS1 TABLE FRAME 2
PAS2 SEATING FRAME 8
PAS3 TABLE CROSS BAR 2
PAS4 SEATING CROSS BAR 4
PAS5 2000 mm—SEATING PLANK 3
PAS6 900 mm.—SEATING PLANK 4
PAS7 M6X25 mm. HEXAGONAL
HEAD BOLT
56
PAS8 M12x80 mm. HEXAGONAL
HEAD BOLT
24
PAS9 M6 LOCKNUT 56
PAS10 M12 LOCKNUT 24
PAS11 M12 PLAIN WASHER 48
P1 (IT CONTINUES ON THE BACK OF THIS SHEET)
[PAS3x2]
[PAS11] [PAS9/10]
[PAS8x2]
[PAS1x2]
[PAS7/8] [PAS2] [PAS1] [PAS3] [PAS4]
Thank you for purchasing our high quality products. The Aussie Snack Bar Setting has been manufactured with certified materials to achieve high reliability and minimum mainte-
nance. It is our commitment to provide cost—effective solutions for outdoor applications.
[PBS5/6]
[PAS10x2]
[PAS11x4]
[PAS5x3]
A. Lay a seating plank [PAS6] up side down on an even surface and bolt it to the two seating frames [PAS2], by using hexagonal head bolts [PAS7] and locknuts [PAS9] – finger tighten.
B. Install the seating cross bar [PAS4], in between the seating frames legs and secure them with hexagonal head bolts [PAS8], locknuts [PAS10] and plain washers [PAS11] - Finger tighten.
C. Repeat the same assembling process until completing the 4-seat kit, which are included in the Aussie Snack Setting package.
2
A. Turn the assembled components 180°.
B. Adjust and tight the bolts with spanners and appropriate tools.
C. Install the Aussie Snack Bar Setting to the ground, by using dyna-bolts.
3
P2
[PAS9x4]
[PAS10x2] [PAS2]
180°
[PAS7x4] [PAS11x4]
[PAS8x2]
[PAS4]
