THEO S ta em nofLi Lounge Seating and Tables - kimball.com · Tables Table bases are standard in...
Transcript of THEO S ta em nofLi Lounge Seating and Tables - kimball.com · Tables Table bases are standard in...
THEO™ Statement of Line
Page 29.1
Lounge Seating and Tables
High-Back Lounge without Arms➤See page 29.3 to specify.
Height 41"–453⁄4"
Width 30"
Depth 30"
Seat height 181⁄4"–231⁄2"
Seat width 19"
Seat depth 18"
Arm height from floor —
Arm height from seat —
Kneespace 141⁄2"–191⁄4"
High-Back Lounge with Arms➤See page 29.3 to specify.
Height 41"–453⁄4"
Width 30"
Depth 30"
Seat height 18"–223⁄4"
Seat width 19"
Seat depth 18"
Arm height from floor 24"–283⁄4"
Arm height from seat 6"
Kneespace 141⁄2"–191⁄4"
Mid-Back Lounge without Arms➤See page 29.3 to specify.
Height 36"–403⁄4"
Width 30"
Depth 27"
Seat height 18"–223⁄4"
Seat width 19"
Seat depth 18"
Arm height from floor —
Arm height from seat —
Kneespace 141⁄2"–191⁄4"
Mid-Back Lounge with Arms➤See page 29.3 to specify.
Height 36"–403⁄4"
Width 30"
Depth 27"
Seat height 18"–223⁄4"
Seat width 19"
Seat depth 18"
Arm height from floor 24"–283⁄4"
Arm height from seat 6"
Kneespace 141⁄2"–191⁄4"
Guest➤See page 29.3 to specify.
Height 34"–383⁄4"
Width 30"
Depth 25"
Seat height 18"–223⁄4"
Seat width 19"
Seat depth 18"
Arm height from floor —
Arm height from seat —
Kneespace 141⁄2"–191⁄4"
Ottoman➤See page 29.3 to specify.
Height 18"
Width 24"
Depth 183⁄4"
Seat height 18"–223⁄4"
Seat width 17"
Seat depth 18"
Kneespace 141⁄2"–191⁄4"
TheoKimball Seating
Theo seating and table models are dimensionally consistent and meet or exceed the applicableBIFMA/ANSI standards.
Price List Effective Dates:Pricing 02.04.19Revision 12.16.19
End Table Bases➤See page 29.6 to specify.
Nominal table height 20"
Actual base height 187⁄8"
Chat Table Bases➤See page 29.6 to specify.
Nominal table height 26"
Actual base height 247⁄8"
Square and Soft-Square Table Tops➤See page 29.5 to specify.
For use on: End Base Chat Base
24"D x 24"W •30"D x 30"W • •36"D x 36"W •
Round Table Tops➤See page 29.5 to specify.
For use on: End Base Chat Base
24" diameter •30" diameter • •36" diameter •
Tables
Table bases are standard in casters or polished aluminumglides that match Theo loungeseating.
Tops available in three shapes and 7 worksurface material/rimcombinations.
Thickness of the top variesbased on the material selected;consequently, the overall height ofthe table will vary. 20"H end tablebases without a surface are187⁄8"H; 26"H chat table baseswithout a surface are 247⁄8"H.
Surface Rim SurfaceMaterial Material Thickness
TFL Vinyl 11⁄8"
TFL Ply 3⁄4"*
HPL Vinyl 11⁄8"
HPL Ply 3⁄4"*
Wood Veneer 11⁄8"
Plywood Self edge 3⁄4"*
Solid surface Radius 11⁄4"
*3⁄4"-thick table top are not avail-able in 36"D x 36"W.
TheoKimball Seating
Overview
Lounge Seating and Tables Planning
Page 29.2
THEO™
Seating & Tables
Statement of Line ➤See page 29.1
Planning page 29.2
Pricing page 29.3
Surface Materials page 29.7
Back and seat shells are availablein all Kimball standard wood finishes.
Polished control and gas-lift allowheight and tilt adjustment.
Low-profile, four-star, polishedbase is standard with nylon glides withpolished covers. Soft ball casters withpolished covers are optional; upchargeapplies.
Back and seat foam is 25⁄8"-thickand highly resilient with 32 ILD anddensity of 2.5.
Side foam is 17⁄8"-thick and highlyresilient with 32 ILD and density of2.5.
Table tops are offered in a variety ofmaterials including:• TFL• HPL• Plywood veneer• Solid surface
Tops and bases are specified separately to create 20"H end(shown) and 26"H chat-heighttables.
TB133
Fire code treatment is available onselect Kimball upholstery.➤See the Kimball Surface MaterialsReference Guide at www.kimball.comor contact By Design.
How to Specify
Lounge and Guest! Model
Back upholstery:2 Upholstery grade3 Upholstery number
Seat upholstery:4 Upholstery grade5 Upholstery number
Arm upholstery (omit for armless models):
6 Upholstery grade7 Upholstery number
Wood finish:8 Finish price group STD = Group 19 Finish designator
bl Base finish: 497 = Polished Aluminumbm Casters/glide option: C61 = Nylon glides C65 = Soft casters (+$51)
Ottoman! Model2 Upholstery grade3 Upholstery number4 Finish price group STD = Group 15 Finish designator6 Base finish: 497 = Polished Aluminum7 Casters/glide option: C61 = Nylon glides C65 = Soft casters (+$51)
➤See page 29.9 for COM/COLyardage requirements.
with Kimball Upholstery
Lounge Seating Pricing
GSA Contract Pending
Page 29.3
THEO™
Seating & Tables
TheoKimball Seating
Kimball Upholstery Price GradeModel 1 or COM 2 3 or COL 4 5 6 7 L7 L8
High-Back LoungesArmlessK34HLBXA $2832 $2927 $2981 $3043 $3129 $3215 $3305 $3674 $3880
With ArmsK34HLBA $2912 $3025 $3089 $3162 $3264 $3366 $3473 $3910 $4154
Mid-Back LoungesArmlessK34MLBXA $2620 $2708 $2758 $2815 $2895 $2975 $3058 $3400 $3590
With ArmsK34MLBA $2699 $2805 $2865 $2933 $3029 $3125 $3225 $3635 $3863
GuestK34G $2300 $2381 $2427 $2480 $2553 $2626 $2703 $3017 $3193
OttomanK34O $1304 $1343 $1365 $1390 $1425 $1460 $1497 $1647 $1731
TB133
Fire code treatment is available onselect Alliance Program upholstery.➤See the Kimball Surface MaterialsReference Guide at www.kimball.comor contact By Design.
How to Specify
For each upholstery grade step inthe model specification, combinethe Alliance partner designator and fabric grade as follows:ARC[grade] = Arc ComCAR[grade] = CarnegieCFS[grade] = CF StinsonLDI[grade] = EnviroLeatherKNL[grade] = KnollTextilesMHM[grade] = MaharamMAF[grade] = Mayer FabricsMOM[grade] = MomentumULT[grade] = Ultrafabrics
➤See the corresponding Kimballupholstery pricing page forcomplete “How to Specify” steps.
Statement of Line ➤See page 29.1
Planning page 29.2
Pricing page 29.3
Surface Materials page 29.7
Alliance Upholstery Price Grade A B C D E F G H IModel J K L M N O P Q R
K34HLBXA $2967 $3035 $3085 3137 $3193 $3259 $3299 $3369 $3429
3490 3591 3791 3915 3944 3966 3998 4028 4163
K34HLBA 3072 3153 3212 3274 3340 3418 3466 3549 3620
3692 3812 4049 4196 4230 4256 4294 4330 4490
K34MLBXA 2745 2808 2855 2902 2955 3015 3052 3118 3172
3230 3322 3508 3622 3650 3670 3700 3727 3852
K34MLBA 2849 2925 2981 3038 3101 3173 3218 3297 3362
3431 3542 3765 3902 3935 3959 3995 4028 4178
K34G 2415 2473 2516 2560 2608 2664 2698 2758 2808
2861 2946 3117 3222 3247 3266 3293 3319 3434
K34O 1359 1387 1407 1428 1451 1478 1494 1523 1547
1572 1613 1695 1745 1757 1766 1779 1791 1846
IMPORTANT: Orders cannot be cancelled for chairs specified withAlliance Program upholstery.
with Alliance Program Upholstery
Lounge Seating Pricing
GSA Contract Pending
Page 29.4
THEO™
Seating & Tables
TheoKimball Seating
Top Material/Rim TFL with TFL with HPL with HPL with Wood with Plywood Solid Vinyl Rim Ply Rim Vinyl Rim Ply Rim Wood Rim Self Edge SurfaceD W Model (LL) (LLD) (L) (LD) (W) (D) (SS)
Square 24" 24" K3424SQ $220 $247 $299 $326 $773 $800 $721
30" 30" K3430SQ 299 326 378 405 852 878 800
36" 36" K3436SQ 378 — 457 — 931 — 878
Soft-Square 24" 24" K3424SSQ $274 $299 $353 $378 $825 $852 $773
30" 30" K3430SSQ 353 378 432 457 904 931 852
36" 36" K3436SSQ 432 — 510 — 983 — 931
Round 24" 24" K3424RD $237 $263 $316 $341 $789 $815 $736
30" 30" K3430RD 316 341 395 420 867 894 815
36" 36" K3436RD 395 — 474 — 946 — 894
Square, Soft-Square, and Round
Table Tops Pricing
GSA Contract Pending
Page 29.5
THEO™
Seating & Tables
TheoKimball Seating
IMPORTANT: • 24" tops are for use on end table
bases only. • 30" tops can be used on either end
or chat table bases. • 36" tops are for use on chat table
bases only.
36" tops are not available in TFL withply rim, HPL with ply rim, or plywoodself edge.
Table Bases➤See page 29.6.
How to Specify
TFL! Model@ Top and rim material: LL = TFL with vinyl edgeband LLD = TFL with ply rim3 Rim profile:
P = Softened vinyl edgeband (LL) E = Flat ply rim (LLD)4 Surface finish designator5 Edgeband finish designator
(include for P rim only)
HPL or Wood! Model@ Top material and rim material: L = HPL with vinyl edgeband LD = HPL with ply rim W = Wood with wood rim D = Plywood with self edge3 Rim profile (omit for plywood): P = Softened vinyl edgeband (L) E = Flat ply rim (LD) F = Softened wood rim (W)4 Surface finish price group (omit for
plywood):STD = Group 1
STD2 = Wood group 2 (+20%)5 Surface finish designator6 Vinyl finish designator
(include for P rim only)
Solid Surface! Model@ Top and rim material: SS = Solid surface 3 Rim profile: A = Radius rim 4 Surface finish designator: 405 = Designer White
Statement of Line ➤See page 29.1
Planning page 29.2
Pricing page 29.3
Surface Materials page 29.7
Standard Includes
• Base: polished aluminum• Nylon glides or soft casters
How to Specify! Model
Statement of Line ➤See page 29.1
Planning page 29.2
Pricing page 29.3
Surface Materials page 29.7
H Model Price
20"H End Table Bases For Use with 24"W or 30"W Table Tops With Glides187⁄8" K34BG20497 $210
With Casters187⁄8" K34BM20497 $247
26"H Chat Table Bases For Use with 30"W or 36"W Table Tops With Glides247⁄8" K34BG26497 $263
With Casters247⁄8" K34BM26497 $299
IMPORTANT: 24" tops are for use onend table bases only. 30" tops can beused on either end or chat table bases.36" tops are for use on chat tablebases only.
Table Tops➤See page 29.5.
Table Bases Pricing
GSA Contract Pending
Page 29.6
THEO™
Seating & Tables
TheoKimball Seating
TheoKimball Seating
Wood Surface Materials
Page 29.7
THEO™
Seating & Tables
Statement of Line ➤See page 29.1
Planning page 29.2
Pricing page 29.3
Surface Materials page 29.7
Wood Price Group 1
MC Amber CherryCC Cordoba CherryMH Mocha CherrySC Sedona Cherry
IM Brighton MapleTM Huntington Maple
ES Espresso WalnutMW Midtown WalnutTW Tribeca WalnutUW Urban Walnut
CO Canyon Straight GrainDF Driftwood Straight GrainYO Monterey Straight GrainNW Tuscan Straight Grain
CR Clear Plywood1
Price Group 22
CS Coco SapeleSS Sienna Sapele
CZ Clear Zebrawood
1 Available on plywood tops only.2 Available on table tops only.
Applies to:• Theo seating• Theo tables
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of theKimball materials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)
overview• Alliance program • TB133 process
IMPORTANT: Wood finishes appliedto solid hardwood are complementaryto the same wood finish applied towood veneer, but not an exact match.➤Contact Customer Service for moreinformation.
Statement of Line ➤See page 29.1
Planning page 29.2
Pricing page 29.3
Surface Materials page 29.7
Laminate and Vinyl Surface Materials
Page 29.8
THEO™
Seating & Tables
TheoKimball Seating
HPL, TFL, and Vinyl Applies to:
• HPL and TFL table tops • Table top vinyl edgeband
WoodgrainMC Amber CherryCC Cordoba CherryMH Mocha CherrySC Sedona Cherry
IM Brighton MapleTM Huntington Maple
MW Midtown WalnutTW Tribeca WalnutUW Urban Walnut
CO Canyon Straight GrainDF Driftwood Straight Grain YO Monterey Straight GrainNW Tuscan Straight Grain
CZ Clear Zebrawood
Solid480 Antique White403 Chamois462 Cinder440 Cloud485 Dark Chocolate1
405 Designer White450 Fog488 Frosty White461 Graphite416 Putty2
420 Sandstone425 Shadow460 Storm419 Wallaby
1 Available in vinyl only.2 Available in HPL only.
Pattern2
874 Bronze Legacy842 Canyon Zephyr823 Carbon Evolv841 Desert Zephyr862 Grey Glace844 Loden Zephyr843 Misted Zephyr846 Morro Zephyr812 Mushroom Tigris808 Nickel Evolv807 Silcon Evolv873 Tawny Legacy805 Titanium Evolv809 Tungsten Evolv802 White Nebula814 White Tigris
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of theKimball materials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)
overview• Alliance program • TB133 process
TheoKimball Seating
Page 29.9
THEO™
Seating & TablesUpholstery Surface Materials
Statement of Line ➤See page 29.1
Planning page 29.2
Pricing page 29.3
Surface Materials page 29.7
Upholstery
COM/COL Yardage Requirements
COM COL Non- 1–4" 5–11" 12–18" SquareModel Dir. Repeat Repeat Repeat Feet
K34G Entire Unit 1.8 2.6 3.7 5.2 65.0 Back 1.2 1.7 2.4 3.4 60.0 Seat 1.1 1.6 2.3 3.3 55.0K34HLBA Entire Unit 2.9 4.0 5.6 7.9 101.0 Back 1.6 2.3 3.3 4.7 70.0 Seat 1.1 1.6 2.3 3.3 55.0 Arms 0.5 0.7 1.0 1.4 15.0K34HLBXA Entire Unit 2.4 3.4 4.8 6.8 86.0 Back 1.6 2.3 3.3 4.7 70.0 Seat 1.1 1.6 2.3 3.3 55.0K34MLBA Entire Unit 2.6 3.6 5.1 7.2 88.0 Back 1.4 2.0 2.8 4.0 70.0 Seat 1.1 1.6 2.3 3.3 55.0 Arms 0.5 0.7 1.0 1.4 15.0
COM COL Non- 1–4" 5–11" 12–18" SquareModel Dir. Repeat Repeat Repeat Feet
K34MLBXA Entire Unit 2.1 3.0 4.2 5.9 73.0 Back 1.4 2.0 2.8 4.0 70.0 Seat 1.1 1.6 2.3 3.3 55.0K34O Entire Unit 1.0 1.4 2.0 2.8 28.0
Applies to:• Theo seating
Kimball Seating Fabric Price Grades 1–7
➤See the Surface Materials Reference Guide atwww.kimball.com for the most up-to-date list of available seatingfabric patterns.
Kimball Leather Price Grades L7 and L8
➤See the Surface Materials Reference Guide atwww.kimball.com for the most up-to-date list of available seatingleather.
Alliance Fabric Price Grades A–R
➤See Surface Materials at www.kimball.com for a wide varietyof graded-in fabrics from Arc-Com, Carnegie, CF Stinson,EnviroLeather, KnollTextiles,Maharam, Mayer Fabrics,Momentum, and Ultrafabrics.
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of theKimball materials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)
process overview• Alliance program • TB133 process
Kimball has analyzed each model tomost accurately reflect the COM/COLyardage requirements shown at right.The yardage requirement for eachmodel is based on 54"W fabric andcutting the fabric up the roll.
For widths other than 54", increasethe yardage requirement by the factors below:
Fabric width Increase yardage
50"–53" 15%
48"–49" 30%
45"–47" 45%
If repeat is larger than 18”, contactCustomer Service to confirm the correct amount of yardage required.
When ordering 10 or more chairs inthe same COM, yardage require-ments may be reduced. ➤Contact Customer Service.
Statement of Line ➤See page 29.1
Planning page 29.2
Pricing page 29.3
Surface Materials page 29.7
Notes
Page 29.10
THEO™
Seating & Tables
TheoKimball Seating