ISOBUS Diagnostic
-
Upload
epec-oy -
Category
Technology
-
view
233 -
download
1
Transcript of ISOBUS Diagnostic
ISO 11783-12
Piia VedenjuoksuCustomer Support Engineer, Epec Oy
14.12.20161
ISOBUS Diagnostic
Diagnostic Services
• Defined in the ISO 11783-12 standard
• Diagnostic information, such as ECU identification ISOBUS
Components tab
14.12.20162
Diagnostic services
14.12.20163
Diagnostic information messages PGN Acronym ISO11783-12 Annex B Supported by Epec
ECU Identification Information ECUID B.1 Yes
Software Identification SOFT B.2 Yes
ISOBUS compliance certification message ICC B.3 Yes
ISO 11783 NAME B.4 Yes
ECU diagnostic protocol DIAG B.5 Yes
Active diagnostic trouble codes (*) DM1 B.6 Yes
Previously active diagnostic trouble codes DM2 B.7 No
Diagnostic data clear/reset previously active DTCs DM3 B.8 No
Control Function Functionalities CFF B.9 Yes
Product Identification Information PII B.10 Yes
* Supported by library, no configuration via MultiTool
Diagnostic Services
• To use Diagnostic services
1. Select ISOBUS Diagnostic to be initialized in the CAN tab
2. Define diagnostic information in the ISOBUS Components tab
14.12.20164
Initialize ISOBUS Diagnostic
14.12.20165
ISOBUS Components
6
See Also
• Epec MultiTool Manual
• Epec Programming and Libraries Manual > Libraries > Common
Libraries > ISOBUS libraries
14.12.20167
14.12.20168
Thank you!For further information, please contact:Customer support: Epec Oy
Email: [email protected]