ISO 1514 2005 Testplate

ICS 87.100

Paints and varnishesStandard panels for testing

(ISO 1514 : 2004)English version of DIN EN ISO 1514

Beschichtungsstoffe – Norm-Probenplatten (ISO 1514 : 2004)

A comma is used as the decimal marker.

National forewordThis standard has been published in accordance with a decision taken by CEN/TC 139 to adopt, withoutalteration, International Standard ISO 1514 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffeund Beschichtungen (Coatings and Coating Materials Standards Committee), Technical Committee Allge-meine Prüfverfahren für Beschichtungsstoffe und Beschichtungen.

AmendmentsThis standard differs from the September 1997 edition in that it has been completely revised.

Previous editionsDIN 53227: 1970-02, 1978-04; DIN EN 605: 1992-07; DIN EN ISO 1514: 1997-09.

DEUTSCHE NORM February 2005

DIN EN ISO 1514 {

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

Normenausschuss Bauwesen (NABau) im DIN

English price group 11www.din.de

www.beuth.de 05.05 9629031

Continued overleaf.Document comprises 18 pages.

SupersedesSeptember 1997 edition.

English version

ICS 87.100 Supersedes EN ISO 1514 : 1997.

Management Centre: rue de Stassart 36, B-1050 Brussels

European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung

Paints and varnishesStandard panels for testing

(ISO 1514 : 2004)

© 2004. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN ISO 1514 : 2004 E

Peintures et vernis – Panneaux nor-malisés pour essais (ISO 1514 : 2004)

Beschichtungsstoffe – Norm-Proben-platten (ISO 1514 : 2004)

This European Standard was approved by CEN on 2004-11-08.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.

ÈÉË

December 2004

EN ISO 1514

EN ISO 1514 : 2004

ForewordInternational StandardISO 1514 : 2004 Paints and varnishes – Standard panels for testing,which was prepared by ISO/TC 35 ‘Paints and varnishes’ of the International Organization for Standardization,has been adopted by Technical Committee CEN/TC 139 ‘Paints and varnishes’, the Secretariat of which is heldby DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by June 2005 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.

Endorsement noticeThe text of the International Standard ISO 1514 : 2004 was approved by CEN as a European Standard withoutany modification.

2

3

4

5

5

9

9

10

13

13

13

14

14

15

16

EN ISO 1514 : 2004

ISO 1514 2005 Testplate

Documents

Transcript of ISO 1514 2005 Testplate