Irwin snips uk
-
Upload
sharon-samuel -
Category
Technology
-
view
59 -
download
0
description
Transcript of Irwin snips uk
IRWIN University Specialist Program
IRWINAVIATIONAND OFF SET SNIPS
IRWIN University Specialist Program
IRWIN SNIPS
APPLICATIONThe main application for Irwin Snips arethe cutting of thin material like sheet metal,sheet copper, sheet aluminium etc.
Irwin Snips are available in a number of different designs each optimized for special applications.
THE RANGEThe Irwin programme comprises
Aviation SnipsBulldog SnipOffset SnipsUtility Snips
IRWIN University Specialist Program
IRWIN AVIATION SNIPS
COLD-FORMED BLADESCold-formed blades are 44% strongerthan hot forged blades and requires 25%less cutting force because of moreaccurate blade tolerances.
LOWER SERRATED BLADELower serrated blade grips materialfor a smoother cut with do doublemarked edges.
COMPOUND LEVERAGECompound leverage means reducedpressure and faster and easier cutting.
EXTRA STRONG SPLINES2.66 mmm alloy steel spines provideincreased rigidity and less flexing.
IRWIN University Specialist Program
IRWIN AVIATION SNIPS
SOFT GRIPSOver-molded Pro-Touch soft gripsprovide superior comfort. Resiststwisting and will not come off.
REDUCED HAND SPAN10% reduced hand span increasescontrol and decreases fatigue.
LONG LIFE SPRINGLong life spring for increaseddurability and reliability.
SAFETY LATCHEasy push-up safety latchallows one-handed operation.
THREE VERSIONS101 straight cuts/tight curvesto the left.102 straight cuts/tight curves to the right.103 straight cuts/wide curves left and right.
IRWIN University Specialist Program
IRWIN BULLDOG SNIPS 105
SHORT BLADESShort blades designed formore cutting power.
APPLICATIONThe 105 Bulldog Snips are engineered to cut and trimthicker material. The coldformed blades provide extrastrength and durability.
FEATURESApart from the shorter bladesthe Bulldog Snips have the samefeatures as our Aviation Snips.
IRWIN University Specialist Program
DIY ORIENTATEDThe 104 Utility Snips are an economicalalternative to our Aviation Snips.It’s less robust, but will give the consumergood value for money. Professionals willnot go for the 104.
SERRATED, DROP FORGED BLADESThe 104 Utility Snips come with hot dropforged blades. These blades do not havethe same strength and cutting performanceas our Aviation Snips with cold-formed blades.
IRWIN UTILITY SNIPS 104
IRWIN University Specialist Program
IRWIN UTILITY SNIPS 304
LONGER CUTThe extra long blades of the 304 Utility Snips allows for80 mm length of cut.
SERRATED, DROP FORGED BLADESLike the 104 Utility Snips the 304 UtilitySnips come with hot drop forged blades. These blades do not have the same strength and cutting performance as our Aviation Snips with cold-formed blades.
APPLICATIONThe 304 can be used for cutting sheetmetal, but will typically be used for cuttingsofter materials. The 304 is more orientatedtowards the consumer market.
IRWIN University Specialist Program
IRWIN OFFSET SNIPS
OFFSET BLADESThe main feature of the offset blades isthat during the cutting process you handwill be kept safely above the work.
COLD-FORMED BLADESJust like our Aviation Snips the OffsetSnips have cold-formed blades that are 44% stronger than cast blades and requires 25% less cutting force because of moreaccurate blade tolerances.Lower blade is serrated.
TWO VERSIONS20SL cuts straight and left curves.20SR cuts straight and right curves
OTHER FEATURESOther features like our Aviation Snips.
IRWIN University Specialist Program
IRWIN SNIPS – TYPE OF CUT
101 – Red grips for straight cuts/tight curves to the left.
102 – Green grips for straight cuts/tight curves to the right.
104 – Yellow grips for straight cuts/wide curves right and left (Utility Model).
304 – Yellow grips for extra long straight cuts (Utility Model).
20SR – Green grips for straight cuts and tight curves to the right.
20SL– Red grips for straight cuts and tight curves to the left.
103 – Yellow grips for straight cuts/wide curves right and left.
105 – Bulldog snip for trimming and notching thicker material.
IRWIN University Specialist Program
IRWIN SNIPS – CUTTING CAPACITY
101 1.19 mm 0.84 mm 3.34 cm
102 1.19 mm 0.84 mm 3.34 cm
103 1.19 mm 0.84 mm 3.34 cm
104
105 1.52 mm 1.19 mm 2.25 cm
304
20SR 1.19 mm 0.84 mm 3.02 cm
20SL 1.19 mm 0.84 mm 3.02 cm
MILD STEEL STAINLESS STEEL LENGTH OF CUT