iPASOLINK 250/650

NEC Corporation of Americanecam.com

iPASOLINK 250/650

PASOLINK Series

Next Generation

Nodal RadioHybrid TDM/Packet

At the core of the Intelligent Packet Platform is iPASOLINK,

the High Capacity Hybrid TDM/Packet Radio.

iPASOLINK is a modular network element that integrates a

comprehensive set of TDM and Packet switching features on a

versatile platform, resulting in a reduced total cost of ownership

(TCO). The iPASOLINK is available in two shelf configurations.

• iPASOLINK 250 (2-Way Nodal): Capacity-optimized packet radio

for the extension of reach and capacity

• iPASOLINK 650 (6-Way Nodal): Nodal packet radio for multi-

service aggregation and bandwidth management

NEC’s iPASOLINK is available in split architecture and all-indoor

configurations. The iPASOLINK Outdoor Units (ODUs) are

unmatched in long term reliability with a field proven mean time

between failure measured in the millions of hours. The all-indoor

solution is compact and powerful yielding high system gain with low

power consumption. Both packages use the common Indoor Unit

(IDU) for interface, switching, and modem functions.

Overview

At a Glance

NEC’s Intelligent Converged Platform is designed to meet the capacity, topology, flexibility, and intelligence requirements of next-generation networks. The wide ranging feature set of this platform makes it an ideal choice for carrier and public safety backhaul, as well as utility, energy, enterprise access and transport.

• Provision radio, native TDM and native Ethernet

circuits, with one simple GUI

• Internal MPLS-TP, Ethernet switch, and Link

Aggregation for Packet

• Internal cross-connect, add/drop and loop protection

for TDM

• XPIC, Adaptive Modulation, and key-free for

increased capacity

• Combine optical, copper and microwave in one

platform

• True full redundancy and NEC quality for mission

critical reliability

• Global leader with over two million radios shipped

Feature-rich, Flexible and Compact Solution

Optimized Migration to All-packet Transmission with iPASOLINK

• Optimized, scalable and high capacity link throughput using up to

2048QAM

• Risk-free migration from full TDM to full IP, including anywhere in

between

• Transmission over both microwave and optical

• No capacity keys – full flexibility for capacity on demand

• Layer 1 Link Aggregation (up to 6 channels on the iPASOLINK

650 & 2 on the 250)

• 100% redundancy capable for mission critical traffic integrity

• Onboard packet switch with flexible QoS and other advanced

Ethernet features, such as Sync E, G.8032 ERP, MPLS-TP, to

name a few

• Onboard TDM switch supporting SNCP ring protection for DS1

and SONET UPSR for OC-3

• Cross-Polarity Interference Cancelling (XPIC) for both split

architecture and all-indoor radios

• Common indoor TRX module for 5.8 GHz unlicensed and Lower

6 GHz for simple upgrade to licensed operation

• Indoor TRX with integral space diversity receiver (TRR) for lower

cost ring or multi-channel aggregated applications supporting

2048QAM

• End to End provisioning of both TDM and Ethernet across

microwave and optical network segments using a common

NMS/EMS

Features

The iPASOLINK Series brings top of the line radio performance, a vast array of multi-service transport and traffic engineering functions to address

the needs of the Access, Aggregation, Metro, and Transport Network.

Required Functionality• Native Ethernet / Native TDM• 2048QAM/Adaptive Modulation• Multi-Service Gateway• QoS• Ethernet Synchronization

Access Aggregation Metro/Transport

Required Functionality• 2048QAM/Adaptive Modulation• Nodal Functionality• QoS• Ethernet Synchronization

iPASOLINK 250

iPASOLINK 250

iPASOLINK 250

iPASOLINK 650 iPASOLINK 650

400 Mbps 400～1000 Mbps

Fiber

Flexible High Capacity Capabilities in the iPASOLINK 650

Layer 1 Link Aggregation

• Up to 6 channels in one direction with space diversity

• Up to three LAG groups operating in different directions from one

iPASOLINK 650 IDU

• Aggregate RF channels with different bandwidths and modulation

levels with Adaptive Modulation enabled

ETHERNET RINGPROTECTION

RADIO PROTECTIONTDM RING

PROTECTION(SNCP)

DS1BASEBAND

PROTECTION

Carrier-class Resiliency Via Separate TDM & Packet Protection Mechanisms

Radio Link

• N+0, 1+1 Hot Standby, Space Diversity, Frequency Diversity

• Radio Traffic Aggregation

Ethernet Link

• MPLS-TP

• ITU-T G.8032v2 Ring

• Link Aggregation

TDM Link

• DS1 Baseband Protection

• SNCP Ring

• SONET UPSR

Configuration Flexible and Upgradability to Next-generation Backhaul

The iPASOLINK series supports Native TDM, Native Ethernet, and All

Packet for risk free migration

• iPASOLINK 250: Capacity Optimized Packet Radio

• iPASOLINK 650: Nodal Packet Radio

iPASOLINK Main Features

Radio Link

• Native TDM, Native Ethernet, All IP

• Up to 2048QAM AMR with QoS

• Throughput: 10Mbps to 1000Mbps with XPIC

TDM/SONET Link

• N x DS1/DS3/OC3

• Add-Drop Multiplexer

Ethernet Link

• SP + DWRR QoS

• Ethernet OAM

Synchronization

• TDM - Line Timing (DS1, Sonet or Radio)

• Packet - Sync E

• GPS - IPPS, 5/10 Mhz

Reassurance for Future Network Capability

• Applications flexibility with universal card slots and a range of

functional Modules

• Easy additional of functionality like MPLS TP, XPIC, and AES

Encryption with software upgrades

Optimized cost of Ownership

• Low CAPEX as technology convergence reduces the number of

hardware units

• Low OPEX with enhanced remote management and controls

• Low OPEX of reduced maintenance due to high engineering and

manufacturing quality

1. Close a SONET, TDM or Ethernet ring a. Use iPASOLINK without RF to switch existing nodes

b. Add radio to create ring and switch protection

c. Get point-and-click provisioning with iPASONET

Scenarios

2. Grow or connect to 10GbE, DWDM, or OC-192 network

a. Use iPASONET to manage iPASOLINK Microwave and Optical

b. Add NEC 1400 or 1600, up to 320Gbps packet optical switch

c. Get up to 32 OC-192 or 38 10GbE ports

3. Integrate legacy and future networks

a. Use iPASOLINK for native TDM and MPLS-TP tunnels

b. Add iPASONET to create Pseudowires

c. Get service flexibility OAM while maintaining legacy services

4. Increase Capacity and Reliability

a. Use iPASOLINK for optical, electrical, and microwave, TDM, IP

and SONET

b. Add XPIC, interface cards, or adaptive modulation to links as

needed

c. Get more ports, switch capacity, and RF bandwidth without

downtime

650

250250

iPASOLINK 250 iPASOLINK 650

Frequency 5.8/L6/U6/11/18/23/GHz

Modulation QPSK/16/32/64/128/256/512/1024/2048 QAM

Channel Spacing 5/10/20/30/40/50/60 MHz

AMR Available for 30/40/50/60 MHz CH Sep.

Radio Node Capability 2-Way 6-Way

Interfaces

Base Interface 16DS1 + 2xGigE (SFP)

Add-on Interfaces

-- 63xDS1

-- 6xDS3

-- 8xOC3 (SFP)

-- 2xGbE (SFP) + 2x10/100/1000BaseT (RJ45) + 4xFE (RJ45)

Capacity

(Maximum line rate with 64 byte frame size)

Modulation Channel Size (Bandwidth)

10MHz 20MHz 30MHz 40MHz 50MHz 60MHz

QPSK 18Mbps 35Mbps 56Mbps 70Mbps 99Mbps 114Mbps

16QAM 35Mbps 70Mbps 114Mbps 142Mbps 199Mbps 229Mbps








Packet Functionality Port-based and Tag-based VLAN

QoS/ToS Diffserve/MPLS EXP based priority control

Synchronization GPS, Ethernet [SyncE/GPS/1588v2 (transparent)], TDM [Bits/Line], Radio

Radio Protection N+0 / 1+1 Twin Path / Hot Standby / Space Diversity /Frequency Diversity

BB Protection

TDM DS1/DS3 SNCP

SONET OC3 APS

Packet G.8032v2 (Ring), LACP, MPLS-TP

Ethernet OAM IEEE 802.1ag service OAM and ITU-T Y.1731 PM

Ambient Temperature IDU: -5 to +50 Degree C; ODU:-33 to +50 Degree C

Indoor TRX Dimensions 17.125W x 3.5H x 11.65D in

ODU Dimensions 9.3W x 9.3H x 4.0D in

IDU Dimensions 17.5W x 1.75H x 10.5D in 17.5W x 3.5H x 10.5D in

Power Line Voltage -48VDC (-40.5 to -57 VDC) +/- 20 to 60 VDC (Optional)

Specifications

SW13014 | v.05.10.13

© 2013 NEC Corporation. All rights reserved. NEC, NEC logo, and UNIVERGE are trademarks or registered trademarks of NEC Corporation that may be registered in Japan and other jurisdictions. All trademarks identified with ® or ™ are registered trademarks or trademarks respectively. Models may vary for each country. Please refer to your local NEC representatives for further details.

About NEC Corporation of America Headquartered in Irving, Texas, NEC Corporation of America is a leading provider of innovative IT, network and communications products and solutions for service carriers, Fortune 1000 and SMB businesses across multiple vertical industries, including Healthcare, Government, Education and Hospitality. NEC Corporation of America delivers one of the industry’s broadest portfolios of technology solutions and professional services, including unified communications, wireless, voice and data, managed services, server and storage infrastructure, optical network systems, microwave radio communications and biometric security. NEC Corporation of America is a wholly-owned subsidiary of NEC Corporation, a global technology leader with operations in 30 countries and more than $38.5 billion in revenues. For more information, please visit necam.com.

NEC Enterprise SolutionsNEC Europe Ltdnec-enterprise.com

Corporate Headquarters (Japan)NEC Corporationnec.com

North America (USA & Canada)NEC Corporation of Americanecam.com

APAC NEC Asia Pacific Pte Ltdnec.com.sg

iPASOLINK 250/650

Documents

Transcript of iPASOLINK 250/650