IP-BASED CCTV SURVEILLANCE SYSTEM FOR ELIX/LMIG/ISDTF · As part of strengthening security, it is...

GOVERNMENT OF INDIA DEPARTMENT OF SPACE

VIKRAM SARABHAI SPACE CENTRE MVIT

IP-BASED CCTV SURVEILLANCE SYSTEM FOR ELIX/LMIG/ISDTF

REQUEST FOR QUOTE

August 2016

CONTENTS

1. Introduction 1

2. Brief description of the scope of the work 1

3. Other points 3

4 General conditions 4

5. Pre-bid Meeting/discussion 9

Annexure-I Layout drawing 10

Annexure-II Main item details 11

Annexure-III Detailed specifications of major components 14

Annexure-IV Typical arrangement of cable lying in earth 44

Annexure-V Typical arrangement of pipe

earthing (CED/ELE/S/3/R) 45

Annexure-VI Format : ‘Certificate of Undertaking from

Original Equipment Manufacturer/s’ 46

Annexure-VII Format: ‘Agreement with product

vendors on Back to Back support’ 47

Annexure VIII Price Breakup Format 48

1

1. Introduction

As part of strengthening security, it is proposed to implement an IP-based CCTV

surveillance system in ELIX electrical integration bay, checkout rooms, wiring lab, LMIG bay

and vibration lab at Valiamala. The work which involves supply, installation, commissioning

and maintenance of a robust, reliable and scalable surveillance system to be executed on

turnkey basis as per the following details.

2. Brief description of the scope of the work

� Cameras

� 54 indoor cameras, six outdoor fixed camera and one outdoor PTZ camera are to be

provided at various locations as identified in Table 1. The layout of the installation is

provided in Annexure-I..

Table 1: Details of Proposal

Sl.

no. Area

Panoramic

camera / fish

eye

Indoor

Fixed

Outdoor

PTZ

Outdoor

Fixed

Client nodes

[to view live and

archived videos]

1 Location 1 0 1 0 0 1

2 Location 2 3 17 0 1

3 Location 3 1 2 0 1







10 Location 10 0 4 0 0

11 Location 11 1 4 0 1 1

12 Location 12 0 0 1 2

13 Location 13 0 0 0 0 2

14 Location 14 0 0 0 0 3

15 Location 15 0 0 0 0 1

Total 5 49 1 6 8

� The location-15 in the Table-1 for installation of client node is another building

located 150m away from Location-1 and separate outdoor OFC installation (200m

long) is required. The items are included in Annexure-II

� Recording/monitoring facility

� One control room is proposed in ‘location 1’ as shown in Annexure-I

2

� Monitoring facility(client node) to view the real time and archived video

streams should be available in the control room with LED display,

workstations, joystick based zoom control for cameras, storage systems

and other essential equipments.

� Two 55” Ultra HD LED display is proposed in control room.

� Live video monitoring through the dedicated network at 8 places for

concerned officials shall be provided.

� Video Management Software

� Necessary video management software to support minimum 75 cameras at a time

should be provided. The software shall be capable of handling multiple servers

and clients. The new video management software should support ONVIF certified

IP cameras. It shall be scalable as far as cameras and clients are concerned.

Standard user defined alarms shall be possible.

� The software shall have SMS and e-mail alert features to inform selected alarming

conditions to the mobile telephones and VSSC intranet e-mails (at least 5 no).

� Network Attached Storage (NAS)

� A centralized Network Attached Storage (NAS) for real time back up for 24 X 7

operations should be provided.

� OFC based network

� An independent network as per the layout shown in Annexure-I is to be

established using single mode Optical Fiber Cable (OFC), approximate items

required for the project mentioned in Annexure-II and detailed specifications are

in Annexure III

� Laying of OFC cables, splicing, terminations etc

� OFC cables when laid in ground should be laid along the roads in a route

approved by the Department. Excavation at sample points should be

arranged by the vendor to identify the service lines like power, water,

communication etc. The party should take all precautions to avoid possible

damage to any of the service lines and will be solely held responsible for any

damage and consequent losses.

� The cable should be laid at a depth of 1m. The work includes excavation,

laying of cables through HDPE pipe, providing protection using sand and

baked bricks on sides and top, refilling the trench and consolidation to have

a leveled finish, providing warning tapes etc as shown in figure 1 of

Annexure IV

� Necessary precaution against earth sliding (wherever required) should be

taken during excavation

� At road/floor/wall crossings the cable/HDPE pipe should be taken through

50 mm (min) dia, 2mm thick GI pipe. In road, the GI pipe should be laid at a

minimum depth of 500 mm and in floor it should be laid at a minimum

depth of 150mm. Wherever the length of the pipe exceeds standard length,

3

the same should be jointed using suitable couplers. The disturbed roads and

concrete paths should be reinstated on completion of the work.

� Cable route markers should be provided at an interval of 30m

� Extra length of cable of about 10 m should be laid at the location of each

joint and also at end points

� All works like splicing, terminations, installation of devices etc as required

for the completion of the work are included in the scope of the work.

� Power supply

� The following are included in the scope of the work

� 230V AC single phase power supply will be made available by VSSC at one

point in each location to meet the power requirements. Further wiring to the

UPS, cameras, switches and other devices as applicable and coming under the

scope of the work are to be arranged by the vendor. If the vendor requires any

other voltage, necessary conversion equipments shall be planned and

arranged.

� Armored aluminum conductor cable of adequate size is to be used when laid

in ground. The cable should be laid at a depth of 750mm as per the typical

drawing given in figure 2 of Annexure IV.

� Wiring inside the building (if required) should be done using PVC insulated

copper conductor cables run through cable management system.

� Electrical earth shall be provided at each area. The configuration of earth

scheme is provided in Annexure-V.

� Surge suppression devices

� The entire CCTV system shall be protected against all kinds of surges, lightning

over voltages, electrical interferences etc. Suitable transient voltage and surge

suppression devices shall be incorporated wherever required.

� Safety

� The devices used shall comply with the safety standards as applicable for a CCTV

installation. Also the devices shall not produce any type of interference with other

electronic devices being installed and used in the areas and shall comply with the

standard EMC guidelines to avoid radiation related disturbances to other

equipments.

3. Other points

3.1 Vendor has to consider all the materials/components required for realization of a

fully functional IP-based integrated security system irrespective of their mention in

the tender. Additional requirements, if any, to achieve a complete solution

should be brought out specifically.

4

3.2 Vendor should provide a diagram showing the complete configuration of the

proposed solution indicating all the elements viz cameras, switches, servers,

workstations, PCs, storage unit, monitoring interfaces etc involved in the solution.

3.3 For all the items, make, model no. and relevant industrial standards shall be explicitly

brought out. The related technical brochures/data sheets/supporting documents to

verify the offered specifications should be submitted along with the offer. Each

brochure shall be numbered in accordance with the tendered item for easy reference.

In each such brochure/document, the technical contents corresponding to the

offered product need to be highlighted.

3.4 Technical Compliance Statement: For each item, apart from the make and model,

the supplier shall provide a technical compliance as per the format furnished below.

Statement mentioning VSSC specified technical features on the left side and features

available to the offered product on the right side, as per the following format. In case

of any deviation (may be superior or inferior), the same may be explicitly mentioned

against remarks

Sl

No

VSSC

Specification

Specification

of the offered

Product

Compliance

(Same/

Superior

/Inferior)

Remarks (In case of any deviation

from VSSC Spec, the same shall be

mentioned here) & the reference

details of Brochure/technical

papers attached as proof along

with the tender.

3.5 Documentation: After commissioning, the supplier should submit a report with full

details of the setup with facility layout, camera locations, system architecture,

network cable routing diagram and operational and maintenance documents of the

overall system.

3.6 Updates/renewal of licenses: For all the licensed products, required licenses shall

be submitted with appropriate authorization. Updates/renewal of such licenses

during warranty & AMC periods will be the responsibility of the vendor.

3.7 Acceptance Testing: Acceptance testing of the installation shall be done by VSSC

against the specifications and features of all the subsystems of the CCTV system

installed.

4 General conditions

4.1 Vendor qualification criteria

� Vendor must be a recognized company registered under Indian Company Act-

1956. The company should have been in existence for a minimum period of five

years prior to the date of issue of this tender.

5

� The vendor should be an ISO 9001:2008 certified firm

� Experience :

� The bidder should be an established System Integrator with experience in

works of similar nature for the last five years.

� The bidder should have experience of having successfully completed

similar works during last 7 years ending last day of month previous to the

one in which applications are invited. The bidder should meet one of the

following criteria.

o Three similar works costing not less than 46 lakhs

or

o Two similar works costing not less than 57 lakhs

or

o One similar completed work costing not less than 92 lakhs

o At least one of those installations should be one involving design,

supply, installation and commissioning of at least 50 cameras with

intelligent software for control, centralized servers and storage

facilities in a high security installation in India like Refinery/Heavy

Industry/Defence/ Space.

� Documentary proof like work order/purchase order, completion certificate,

contact details of the client, income tax clearance certificate, etc in proof of their

claim should be submitted along with the technical bid

4.2 Other terms and conditions

4.2.1 Submission of tender

� Tender should be submitted in two parts. First part should contain all

technical details, terms and conditions, and documents in proof of

vendor qualification.

o The terms and conditions, and documents in proof of vendor

qualification should be uploaded in “Document Solicited from

Vendor” page in e-procurement portal

o The technical details should be uploaded in “Supporting Documents

from Vendor” page in e-procurement portal

The second bid should contain only prices with breakup as per the

format given and it should be uploaded in “Commercial Documents from

Vendor” page in e-procurement portal

� The vendor should arrange a presentation on their proposal and

demonstrate the capabilities of their offered products to the VSSC

authorized officials, if called for by the Department during the technical

evaluation. Technical proposal of the vendor is liable to be rejected

6

unless the claims made in it substantiate/satisfy the technical

requirements laid down in this tender.

4.2.2 Schedule of completion

The work should be completed in all respects and handed over to the

Department within three months from the date of purchase order

4.2.3 Compensation for delay

Liquidated damages will be levied @ 0.5 % for every week for which the

work remains incomplete subject to a maximum of 10% of the order value.

4.2.4 Warranty

� All the devices in the CCTV System should be guaranteed for trouble free

performance for a period of three years from the date of acceptance.

Performance bank guarantee (BG) for 10% of the order value should be

furnished before effecting final payment. The performance BG should be

valid for a period of 42 months including a claim period of six months.

� Warranty shall include preventive and break down maintenance including

repair, replacement of applicable items for bringing back the systems to

normal working condition.

� Software maintenance including updates shall also come under warranty

terms.

� Periodic maintenance plan during the warranty period shall also be

submitted to VSSC and followed accordingly.

4.2.5 Annual Maintenance Contract (AMC)

• Comprehensive AMC for the entire system coming under this contract

should be provided against payment, for four years from the date of

expiry of performance warranty.

• The annual AMC charges for the above period should be indicated in the

price bid. The AMC charges will also be considered to decide the merit of

the offer.

• During the AMC period, the supplier should attend any number of

breakdown calls and also preventive maintenance as per the schedule

finalized on mutual agreement with the department on completion of the

work.

• In case the vendor fails to undertake the AMC from the date of expiry of

warranty, the department will have the right to claim the losses or

7

additional expenses (incurred in availing maintenance services through

alternate means) from the performance BG.

• On completion of the warranty, BG equivalent to the extended warranty

cost for four years, subject to a maximum of 10% of the value of this

contract, should be submitted by the vendor as a proof of their

commitment to undertake AMC for the extended warranty period. This

BG should remain valid till the expiry of the paid AMC.

• The performance BG will be released only on furnishing of BG as above. In

case the vendor fails to furnish the BG as given above the department will

be at liberty to realize the same from the performance BG.

4.2.6 On-site Support (Optional – to be decided by VSSC)

• One service technician with Network Associate/CCNA certification and

sufficient experience in the maintenance and upkeep of security and

surveillance systems should be posted at VSSC during the warranty and

AMC period.

• Cost for on-site support should be mentioned separately.

• The normal working time for the personnel posted for on-site support

should be same as that for VSSC. However they are expected to work

beyond office hours as well as on holidays (with prior permission from

VSSC) if so required. No extra payment will be made on this account.

• Cost for onsite support will be paid only for actual working days based on

the attendance sheet provided by the attendance monitoring system of

VSSC. Pro rata deduction will be made on the cost for onsite support for

each day of absence during the AMC and warranty periods.

4.2.7 Uptime

• The vendor should ensure an uptime of 99% for the system on quarterly

basis. Uptime is defined as below: Uptime (in %) = Total number of hours in the quarter - total downtime

(in hours in the quarter)*100

___________________________________________

Total number of hours in quarter

However the down time should not exceed that specified below, at a

stretch at any time.

Camera – 2 working hrs

Rectification involving repair – 2 working hrs

Rectification involving replacement – 24 working hrs

• The vendor should maintain minimum stock of spares to ensure uptime

as mentioned above.

8

• The vendor has to ensure that all complaints are attended within 2 hours

of lodging of complaint and the faults/defects arising in the said

equipment are rectified within the time stipulated above.

• For the applicable quarter, if the system uptime is below the uptime

specified, then for an accumulated downtime of every 10 hours or part

thereof, in excess of 22 hours, VSSC shall be eligible for a rebate of 2% pro

rata AMC charges of one quarter.

• First three months of warranty will be taken as “proving in” period.

Though the bidder shall maintain the system to the highest possible

efficiency during this period, no rebate as mentioned above shall be

applicable.

• For the purpose of measurement, “downtime” or ‘fault duration’

constitutes any period of time during which the footage of a camera is not

available either by way of the fault of the camera, or of network/or any of

the associated systems.

• A response time of 30 minutes at a stretch shall be excluded from fault

duration for the purpose of calculating downtime of the system. For

complaints registered beyond 18 hrs, the downtime will be reckoned

from 8hrs of the following day.

• The bidder should maintain a log register for all complaints

4.2.8 Support from OEM/Technology partners

The bidder should ensure support from the OEMs/Technology partners

for a period of 7 years. A letter from the OEM/technology partner

confirming service support including spares, software upgrades, etc shall

be made available for next 7years. The bidders should attach

CERTIFICATE OF UNDERTAKING FROM ORIGINAL EQUIPMENT

MANUFACTURER and Agreement with product vendors on back to back

support. The format is attached in ANNEXURE VI and ANNEXURE VII.

These undertaking from OEM’s should be supplied for Camera, IR

Illuminators, DVMS, Network Switches, Servers, Workstations, Client

systems, Storage, Tape library, Network Passive, Surge Protectors and

UPS.

4.2.9 Training

Training in operation, maintenance and administration of the system

should be provided to authorized VSSC & CISF officials as required.

9

4.2.10 Payment

The vendor should submit a cost break up as per the format given in the

price bid. Payment will be made pro rata as indicated below based on the

price break up furnished in Annexure VIII.

On completion of supply of materials and

acceptance by Department

: 60%

On completion of installation and pre-

commissioning checks

: 30%

On completion of testing, evaluation and

acceptance of the integrated system

: 10% against

production of

performance BG

AMC charge : Quarterly on pro

rata basis

5. Pre-bid Meeting/discussion

� Pre bid discussions to clarify the technical requirements could be held on request

by the vendors within three weeks of tender floating. The parties which don’t

request for pre-bid discussions shall be considered fully understood the exact

requirements raised by VSSC. All requirements shall clearly be understood by the

parties before offering their solutions. Hence those vendors who wish to get more

clarification in any of the stipulated terms, conditions and requirements are

advised to visit the installation sites after intimating the MVIT Purchase

Department and fixing appointment.

� If any assumption is made while offering the solution, those shall be brought to the

notice of VSSC.

11

ANNEXURE II

Main items details

Sl.

No. Description Qty Unit

Rate(Rate for installation include testing

&

Supply Installation Total

1 Indoor Fixed Camera, Make: AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/ SONY

49 Nos

2 Indoor Fixed Panoramic/ Fish eye Camera, Make: AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/ SONY

5 Nos

3

Outdoor Heavy duty, Pan/Tilt, Day and Night vision camera

with External IR Illuminators Make:

AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/ SONY

1 No

4

Outdoor Fixed Night vision camera with IR Illuminators

Make: AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/

SONY

6 Nos

5 Workstation with High end Graphics

Make: Dell/IBM/HP/Lenovo 1 No

6 55” Ultra HD LED Display System with HDMI Cable and Wall

Mounting Kit. 2 No

7 Joystick for PTZ control with all accessories 1 No

8 24 port SFP L3 manageable switch. Make: Alcatel/Allied

Telesis/Brocade/CISCO/Extreme/HP 1 No

9 24-port 1G UTP PoE with 2 SFP Fiber Uplink. Make: Alcatel/Allied Telesis/Brocade/CISCO/Extreme/HP

1 No

10 24-port 1G UTP with 2 SFP Fiber Uplink. Make: Alcatel/Allied Telesis/Brocade/CISCO/Extreme/HP

1 No

11 8-port 1G PoE UTP 2 SFP Fiber Fiber Uplink. Make: Alcatel/Allied Telesis/Brocade/CISCO/Extreme/HP

6 Nos

12

8-port 1G PoE UTP with 2 SFP Fiber Uplink Industrial grade

switch. Make: Alcatel/Allied

Telesis/Brocade/CISCO/Extreme/HP

3 Nos

13 16-port 1G PoE UTP 2 SFP Fiber Fiber Uplink. Make: Alcatel/Allied Telesis/Brocade/CISCO/Extreme/HP

2 Nos

14 Single mode 1G SFP LC LX Transceiver 24 Nos

15 High End Client system with Graphics

Make: Dell/IBM/HP/Lenovo 8 Nos

16 Video Management Software minimum 100 channel license

and software support and upgrade cost for 3 years 1 No

17 Rack mount server


18

Storage system 120 TB Make :

Dell/HP/IBM/EMC/Netapp

1 No

12

Sl.



&


Passive components Make: AMP / Clipsal / Belden / HFCL /

Krone/Molex/R&M

19 Rack Mount 12 port single mode loaded fibre patch panel

loaded with sufficient LC couplers & pigtails. 9 Nos

20 CAT6A 24 port fully loaded Jack panel 1U 2 Nos


22 CAT6A RJ45 high quality Jack with boot 75 Nos

23 Face plates with mount box 75 Nos

24 9U Rack with accessories 9 Nos

25 27U Rack with accessories 1 No

26 Online UPS 6KVA 1 No

27 9/125 SM OS2, Indoor 12 core Fibre cable, LSZH, OFNR 1500 Mtrs

28 Outdoor Fibre Cables, Loose-tube, Gel-filled, 9/125 SM OS2

Corrugated Steel tape Armoured 1050 Mtrs

29 LC-LC Style SM patch cord 2M length 24 Nos

30 CAT6A cable – supply and laying as with suitable size PVC

conduit thru wall / existing Trenches 3939 Mtrs

31 Cat 6 Patch cord - 1M length 120 Nos


33 CAT6A outdoor patch cords (5Mtr) 3 Nos


35

1.1 kV Grade 3 Core x 2.5 Sq. mm stranded (3 Strands of

0.83mm each, total 9 strands) Copper conductor Armoured

XLPE insulated and overall sheathed armoured Cable with

ISI Certification as per IS 1554/IS 7098 [Make :

FINOLEX/Nicco/Gloster/ INCAB/Universal)

600 Mtrs

36 Surge protectors for power line 4 Nos

37 Surge protectors for network (camera end) 3 Nos

38 Surge protectors for network(inside outdoor enclosure) 3 Nos

39 Outdoor Kiosk. Make: Rittal, APW 3 Nos

40 Fibre reinforced pole for mounting cameras 3 Nos

Furniture

41 Rolling Chair

Make: Godrej or equivalent 11 Nos

42 Computer Table


Part II – Comprehensive AMC Charges (for four years from the date of expiry of performance warranty)

43 Comprehensive AMC charges

13

Sl.



&


44 Year I 1 Lot

45 Year II 1 Lot

46 Year III 1 Lot

47 Year IV 1 Lot

48 Onsite support cost (optional) 1 Lot

14

ANNEXURE III

DETAILED SPECIFICATIONS OF MAJOR COMPONENTS

1. Indoor Fixed camera (With all accessories)

1 Preferred Make: AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/

SONY

2 Image Sensor: 1/4" or 1/3” or 1/2.7” or 1/2.8” Progressive Scan

CCD/CMOS with Day/Night Function (IR corrected)

3 Lens: 5-50mm varifocal

4 Resolution: 1920 X 1080P

5 Frame rate: H.264: 25 fps selectable or better

6 Minimum Illumination: Colour: 0.01 lux @ F1.4 or better, B/W: 0.001 lux @

F1.4 without IR and 0lux @F1.4 or better on IR on

7 Web interface Camera should have web interface to configure and

control

8 Network Interface: 10/100 RJ 45

9 Digital Zooming Up to 4X digital zoom the live video

10 Video Compression: H.264 (MPEG-4 Part 10/AVC)

11 Video streaming: Multi-stream with variable/ configurable frame rate

& bit rate for preview and recording H.264 /MJPEG

Video

12 Signal to Noise ratio >= 50dB

13 Audio Streaming: Two-way

14 Alarm inputs/ outputs: Minimum 1 configurable input and output.

15 Intelligence Built-in hardware motion detection, Tamper Alarm,

16 Image settings: Wide dynamic range (WDR), colour, brightness,

sharpness, white balance, exposure control, backlight

compensation

17 Security: Password protection, User access logs.

18 Supported protocols:

IPv4/v6, HTTP, FTP, SMTP, UPnP, SNMP, RTP, TCP,

UDP, IGMP, RTCP, ICMP, SOCKS, DHCP, HTTPS, NTP,

SSL, TLS, SRTP, SSH, QoS, etc

19 Users: 4 or more simultaneous Users / Unlimited users in

multicast mode.

20 Power: 230 V ac + 5%, POE, or with suitable power adapter

21 Mounting Ceiling / Wallmount

22 Casing: IK 10 rated Vandal resistant

23 Certifications: UL, CE, FCC , EN, BIS , STQC

24 Operating Temperature: 0°C to + 50°C

25 Accessories: Power supply, other mounting accessories and

connector kits, Installation Guide, CD with installation

15

tools, recording software and User’s Manual,

installation and management tools.

26 Compatible standard and

Protocol

ONVIF profile S support

27 Local storage SD/SDHC/SDXC, minimum 32GB

28 OPEN Platform Vendor to provide open API incase VSSC do any

integration

2. Indoor fish eye Fixed camera (With all accessories)


SONY

2 Image Sensor: 1/4" or 1/3” or 1/2.7” or 1/2.8” or 1/1.8” Progressive

Scan CCD/CMOS with Day/Night Function (IR

corrected)

3 Lens: 51.7mm @F2.0, fixed fisheye lens

4 Resolution Resolution: 3MP (2048×1536) / UXGA (1600×1200) /

1.3MP (1280×960)


6 Minimum Illumination: 0.01 lux color, 0 lux BW with IR LEDs on @ F2.0

7 Web interface Camera should have web interface to configure and

control

8 Network Interface: 10/100 RJ 45

9 Video Compression: H.264 (MPEG-4 Part 10/AVC)

10 Alarm inputs/ outputs: Minimum 1 configurable input and output.

11 Intelligence Built-in hardware motion detection, Tamper Alarm,

12 Image settings: Wide dynamic range (WDR), colour, brightness,

sharpness, white balance, exposure control, backlight

compensation

13 Security: Password protection, User access logs.

14 Supported protocols:

IPv4/v6, HTTP, FTP, SMTP, UPnP, SNMP, RTP, TCP,

UDP, IGMP, RTCP, ICMP, SOCKS, DHCP, HTTPS, NTP,

SSL, TLS, SRTP, SSH, QoS, etc

15 Users: 4 or more simultaneous Users/Unlimited users in

multicast mode.

16 Power: 230 V ac + 5%, POE, or with suitable power adapter

17 Mounting Ceiling / Wallmount

18 Casing: IK 10 rated Vandal resistant

19 Certifications: UL, CE, FCC , EN, BIS , STQC

20 Operating Temperature: 0°C to + 50°C

21 Accessories: Power supply, other mounting accessories and

connector kits, Installation Guide, CD with installation

tools, recording software and User’s Manual,

16

installation and management tools.


Protocol

ONVIF profile S support

23 Local storage SD/SDHC/SDXC, minimum 32GB

24 OPEN Platform Vendor to provide open API incase VSSC do any

integration

3. Outdoor Heavy duty, Pan/Tilt, Day and Night vision camera with External IR Illuminators

& IP connectivity (with accessories)

1 Preferred Make: AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/ SONY


CCD/CMOS (with IR cut filter)

3 Optical zoom 20x (High Definition) or better

4 Digital Zoom 12x or better

5 IR Illuminators: Make: Raytec, VIDEOTEC

LED array / Laser illuminator technology with

wavelength 850nm or better. Two nos illuminators with

60° - 180° coverage to give total 360° coverage and each

to cover a minimum of 125 m at narrow angle and 75 m

at wide angle or better with IP66 ingress

rating. Operating temperature -10 deg to +50 deg

6 Resolution: Up to 1920x1080, @ 25 fps, Should support PAL Indian

standard


8 Focus: Automatic

9 Horizontal Angle: 3600 endless

10 Minimum Illumination: Color .5lux(1/30 sec), BW 0.05 lux(1/30 sec)

11 Pan 3600

12 Tilt: 1200 or better

13 Pan/Tilt: Preset Speed: Pan & Tilt 0.50– 1000/ sec or better

14 Day / Night Functions Day / Night, Automatic switch over from Colour to B/W

15 Network Interface: 10/100 base TX, RJ 45, IP v4 & IP v6.

16 Mechanical IR cut filter: Yes

17 Video Compression: H.264 , M-JPEG

18 Video streaming: Multi-stream with variable/ configurable frame rate / bit

rate for preview and recording H.264/MJPEG Video

19 Intelligence Built-in hardware, intelligent motion detection. Auto

tracking,

20 Security: Password protection, IP addresses filtering, User access

logs.

21 Supported protocols: IPv4/v6, HTTP, FTP, SMTP, UPnP, SNMP, RTP, TCP, UDP,

17

IGMP, RTCP, ICMP, SOCKS, DHCP, HTTPS, NTP, SSL, TLS,

SRTP, SSH, QoS etc

22 Power 230V ac +/- 5% , 50 Hz, Suitable Power adapter, POE+

23 Mounting Pole mounted

24 Casing IP66 or above- rated casing, Nema 4X with sunshield, IK-

10 rated metal Vandal proof housing

25 Certifications: UL,CE, FCC,EN

26 Operating temperature: -10°C to +500C or better

27 Accessories: Power supply, other mountings and connector kits,

Installation Guide, CD with installation tools, Recording

software and User’s Manual, Installation, Management

tools, Service manual and QC test report.


Protocol

ONVIF Profile S Support

29 Local storage SD/SDHC/SDXC, Minimum 32GB

4. Outdoor Fixed Night vision camera with IR Illuminators & IP connectivity (with accessories)

1 Preferred Make: AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/ SONY


CCD/CMOS (with IR cut filter)

3 Lens: 10x Optical zoom or better, automatic day/night

4 Digital Zoom 2x or better

5 IR Illuminators: In built IR LED with wavelength 850nm or better with

adjustable angle and intensity with 15mts coverage in

wide and 30mts telemode. Built in photocell for

automatic operation i.e. auto switch on at sunset and

auto switch off at sunrise

6 Resolution: Up to 1920x1080, @ 25 fps, Should support PAL Indian

standard


8 Focus: Auto

9 Horizontal Angle: 5o to 50o or better

10 Minimum Illumination: Color: 1.2 lux , B/W: 0.06 lux & 0 Lux IR Illuminator

ON or better

11 Day / Night Functions Day / Night, Automatic switch over from Colour to B/W

12 Network Interface: 10/100 base TX, RJ 45, IP v4 & IP v6

13 Mechanical IR cut filter: Yes

14 Video Compression: H.264, M-JPEG

15 Video streaming: Multi-stream with variable/ configurable frame rate / bit

rate for preview and recording H.264/MJPEG Video

18

16 Alarm inputs/ Outputs: Minimum configurable 2 input or output

17 Motion Detection: Built-in hardware, intelligent motion detection.

18 Security: Password protection,, User access logs.

19 Supported protocols: IPv4/v6, HTTP, FTP, SMTP, UPnP, SNMP, RTP, TCP, UDP,

IGMP, RTCP, ICMP, SOCKS, DHCP, HTTPS, NTP, SSL, TLS,

SRTP, SSH, QoS etc

20 Users: 5 or more simultaneous Users/Unlimited users in

multicast mode.

21 Power 230V ac +/- 5% , 50 Hz, Suitable Power adapter, POE+,

ac/dc/ POE Class 3

22 Mounting Pole mounted

23 Casing IP66 - rated casing with sunshield, NEMA-4X IMPACT

resistant housing Vandal proof

24 Certifications: UL,CE, FCC,EN

25 Operating Temperature: -10°C to + 50°C

26 Accessories: Power supply, other mountings and connector kits,

Installation Guide, CD with installation tools, Recording

software and User’s Manual, Installation, Management

tools, Service manual and QC test report.


Protocol

ONVIF Profile S support

28 Local storage SD/SDHC/SDXC, Minimum 32GB

5. Workstation with High end Graphics

The system should be capable to handle video streams from 76 cameras and should

display the CCTV video without any jitter. Whatever specified in the tender is the minimum

requirement. If bidder feels this to be inadequate to display video streams without jitter,

additional hardware requirements should be brought out specifically and included in the

tender.

1 Make Dell/HP/IBM/Lenovo

2 Processor Intel(R) Xeon(R) Processor E3-1225 v5 (Quad Core 3.3GHz,

3.7Ghz Turbo, 8MB, w/HD Graphics P530)

3 Chipset Intel® C236 chipset

4 Memory 16GB (2*8GB) DDR4 Non-ECC RAM, 4 Dimm Slots;Up to 64GB

2133Mhz ECC DDR4 Memory

5 Operating

System Windows 10 Professional

6 Hard Drive 2TB 7200 rpm , 2.5” SATA 7200 RPM

Up to (4) HDDs

19

7 Storage

Controller Intel Rapid Storage Technology supporting SATA 6Gb/s

8 Graphic Card AMD FirePro W5100 - 4GB

9 Gigabit Network

Port Intel Ethernet Connection I219-LM 10/100/1000

10 Optical Drive DVD+/-RW

11 Keyboard &

Mouse USB Based KBD & Mouse

12 Form Factor /

Chassis Minitower

13 Security Trusted Platform Module 1.2 (TPM 1.2); Intrusion switch

14 Power Supply 365W 90% efficient PSU (80PLUS Gold Certified) Energy Star

compliant

15 Bays (2) internal 3.5” bays - supports (2) 3.5” or (4) 2.5” drives; (2)

external 5.25” optical bays

16 Monitor 24 inch Monitor

17 Warranty Minimum 3 years comprehensive onsite Next Business day

warranty directly from the OEM

6. 55” Ultra HD LED Display System with HDMI Cable and Wall Mounting Kit

1 Panel Technology : IPS or VA

2 Aspect Ratio : 16:9

3 Native Resolution : 3,840 x 2,160 (UHD)

4 Brightness : 700 cd/m2 or Better

5 Contrast Ratio : 1,100:1 for IPS , VA : 5000:1

6 Dynamic CR : 4,000,000:1

7 Viewing Angle(H x V) : 178 x 178

8 Color Depth : 16.7 Million

9 Life time(Typ.) : 50,000 Hrs (Typ.)

10 Operation Hours : 24/7 (Professional Display)

11 Orientation : Portrait & Landscape

12 Connectivity

Input : HDMI (1 No.), DP (1 No.), DVI-D (1 No.), RGB (1 no.)

Audio In : 1 No., USB(USB3.0) : 1 No., Audio Out : 1 No.

13 Bezel Color : Black

14 Thin Bezel Width : 18mm or lesser

15 Power Supply : 100-240V~, 50/60Hz

16 Audio Power : 20W(10W x 2)

17 Safety : UL / cUL / CB / TUV / KC

18 Make : LG/Panasonic/Samsung/Sony/Toshiba/JVC

20

7. Joystick for PTZ control with all accessories


SONY

2 Connection: USB Port connected directly to the workstation/ PC.

Uses the Standard Direct X drivers

3 Joystick: Hall-effect joystick with three axes

4 Specification X/Y: for camera view positioning Z: for zoom in and out

programmable push-button, on handle and on base

housing

5 Joystick Travel: X/Y-Axes: ±180, Z-Axis: ±400

6 Centering: Single spring, Omni-directional

7 Shaft: Suitable for right- and left- handed use

8 System Integration: Windows / Linux

8. 24 port SFP L3 manageable switch.

1 Make: Alcatel/Allied Telesis/Brocade/CISCO/Extreme/HP

2 Type: Layer 3 Manageable switch

3 No of Ports: Minimum 24 interfaces of 1G SFP

4 Switching Fabric Speed: 48 Gbps or higher

5 Forwarding Rate: 20 Mbps or higher

6 Switching capacity: Modular and Stackable Architecture to provide Scalable

network, Should have Resilient Stacking Architecture. It

should have non-blocking wire-speed architecture, Should

support IEEE 802.3af & IEEE 802.3at standards., It should be

architected to support real time applications like voice, video,

data by having distributed architecture., Non-blocking

switching backplane of 128 Gbps or more, Forwarding rate of

minimum 90 Mpps. 9K Jumbo frames.

7 L2 and L3 Features Supports minimum 4096 VLANs, Supports minimum 4096 IP

interfaces, VLAN Double Tagging, IEEE 802.1Q VLAN, 802.1s

and 802.1w, Sub 100 ms re-convergence for mesh or ring

architecture, IP v4: IGMP v1, v2 and v3, Link Aggregation

based on 802.3ad across line cards.

IPV4: Static Routing, OSPF, RIP, BGPv4, VRRP, ECMP, PIM

Spares Mode, SSM,

IP v6: Static Routing, RIPng, OSPFv3, VRRPv3, ECMP, support

minimum 16K MAC Addresses

8 Power supply: 230 V/ ac 50Hz Internal power supply

21

9 Security a. Private VLANs, providing security and port isolation of

multiple customers using the same VLAN

b. 803.x support

c. MAC-based Authentication

d. Web-based Authentication

e. Dynamic VLAN Assignment

f. DHCP Snooping

g. ACL, NAC support

h. BPDU Protection

i. STP

j. QoS

10 Features: a. SNMPv1,v2 & v3/RMON/BOOTP/Telnet/Web

b. Network management protocols

c. Port trunking

d. Spanning tree, Priority tags

e. VLAN Tagging

f. Flow controls

g. MAC Based Network Access control

11 Management a. GUI

b. Out of band 10/100/1000 Ethernet management port and

console management port, both on the front panel (for

ease of access) are preferred.

c. Port mirroring

d. SSH and SNMP for secure management

e. RADIUS Support

12 Authentication a. RMON (4 groups)

b. Broadcast Forwarding.

13 Electrical Approvals and

Compliances:

EMC: FCC class A, VCCI class A

14 Safety Certification: UL, cUL, TUV

15 Accessories: Mounting hardware including connecting cables with Indian

Standard plug tops.

9. 24-port 1G UTP PoE Fiber Uplink.



3 No of Ports: Minimum 24 interfaces of 10/100/1000 base TX PoE.

Minimum 2 x 1Gig SFP uplinks.

4 Switching Fabric Speed: Non-blocking switching backplane of 128Gbps or more, 9k

Jumbo frames

22





support IEEE 802.3af & IEEE 802.3at standards., It should

be architected to support real time applications like voice,

video, data by having distributed architecture.

7 L2 and L3 Features Supports minimum 4096 VLANs, Supports minimum 4096

IP interfaces, VLAN Double Tagging, IEEE 802.1Q VLAN,

802.1s and 802.1w, Sub 100 ms re-convergence for mesh

or ring architecture, IP v4: IGMP v1, v2 and v3, Link

Aggregation based on 802.3ad across line cards.


Spares Mode, SSM,

IP v6: Static Routing, RIPng, OSPFv3, VRRPv3, ECMP,

support minimum 16K MAC Addresses


9 Security a. Private VLANs, providing security and port isolation of


b. 803.x support

c. MAC-based Authentication

d. Web-based Authentication

e. Dynamic VLAN Assignment

f. DHCP Snooping

g. ACL, NAC support

h. BPDU Protection

i. STP , QoS

10 Features: a. SNMPv1,v2 & v3/RMON/BOOTP/Telnet/Web

b. Network management protocols

c. Port trunking

d. Spanning tree, Priority tags

e. VLAN Tagging

f. Flow controls

g. MAC Based Network Access control


b. Out of band 10/100/1000 Ethernet management port

and console management port, both on the front panel

(for ease of access) are preferred.

c. Port mirroring

d. SSH and SNMP for secure management

e. RADIUS Support



23


Compliances:



15 Accessories: Mounting hardware including connecting cables with

Indian Standard plug tops.

10. 24-port 1G UTP with 2 SFP Fiber Uplink.



3 No of Ports: Minimum 24 interfaces of 10/100/1000 base TX


4 Switching Fabric Speed: 20 Gbps or higher







video, data by having distributed architecture., Non-

blocking switching backplane of 128 Gbps or more,

Forwarding rate of minimum 90 Mpps. 9K Jumbo frames.







Spares Mode, SSM,




9 Security k. Private VLANs, providing security and port isolation of


l. 803.x support

m. MAC-based Authentication

n. Web-based Authentication

o. Dynamic VLAN Assignment

p. DHCP Snooping

24

q. ACL, NAC support

r. BPDU Protection

s. STP

t. QoS

10 Features: h. SNMPv1,v2 & v3/RMON/BOOTP/Telnet/Web

i. Network management protocols

j. Port trunking

k. Spanning tree, Priority tags

l. VLAN Tagging

m. Flow controls

n. MAC Based Network Access control

11 Management f. GUI

g. Out of band 10/100/1000 Ethernet management port



h. Port mirroring

i. SSH and SNMP for secure management

j. RADIUS Support

12 Authentication c. RMON (4 groups)

d. Broadcast Forwarding.


Compliances:





11. 8-port 1G UTP PoE Fiber Uplink.





4 Switching Fabric Speed: Fabric switching bandwidth of minimum 20Gbps

5 Forwarding Rate: Forwarding rate of minimum 14 Mpps on 64 byte packets

6 Resiliency Shall support virtual switching fabric creation across

multiple switches using 1G Ethernet or higher Links to

achieve distributed link Aggregation. Shall provide

required modules/cables for the same

IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid

Spanning Tree Protocol and IEEE 802.1s Multiple

25

Spanning Tree Protocol

IEEE 802.3ad Link Aggregation Control Protocol (LACP)

7 Layer 2 Features (any

additional licenses

required shall be included)

Shall support up to IEEE 802.1Q (4,000 VLAN IDs) and

255 VLANs simultaneously

MAC address table size of minimum 16000 entries

Shall have the capability to monitor link connectivity and

shut down ports at both ends if uni-directional traffic is

detected, preventing loops

Shall support Jumbo frames to improve the performance

of large data transfers

Internet Group Management Protocol (IGMP)

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

Multicast VLAN to allow multiple VLANs to receive the

same IPv4 or IPv6 multicast traffic

8 QoS and Security Features Access Control Lists for filtering traffic to prevent

unauthorized users from accessing the network

Shall classify traffic using multiple match criteria based on

Layer 2, 3, and 4 information

Powerful QoS feature supporting strict priority (SP)

queuing, weighted round robin (WRR) etc, Ingress Rate

Limiting

IEEE 802.1X Port Based Network Access Control

DHCP Snooping/protection to block DHCP packets from

unauthorized DHCP servers

Port security to allow access only to specified MAC

addresses

9 Management Features Configuration through secure command-line interface

(CLI) over Telnet and SSH

SNMPv1, v2, and v3

FTP and TFTP support

Port mirroring to enable traffic on a port to be

simultaneously sent to a network analyzer for monitoring

RADIUS or TACACS+ for switch security access

administration

Network Time Protocol (NTP) or equivalent support

10 Environmental Features Shall provide ROHS Compliance

Maximum power rating of 50 Watts

Operating temperature of 0°C to 45°C

Safety and Emission standards including UL 60950-1; IEC

60950-1; VCCI Class A; EN 55022 Class A

26

11 Warranty and Support The below Warranty shall be offered directly from the

switch OEM and an undertaking from OEM along with

technical bid required.

Three Years warranty with advance replacement and

next-business-day delivery

12 Accessories Mounting hardware including connecting cables with

Indian Standard plug tops. Should be 19" Rack Mountable



12. Industrial Grade 10/100/1000G Switch with two SFP Uplinks


2 Type: Layer 2 /3 Manageable switch

3 Ports: Minimum 8 ports of 10/100/1000 RJ45 interfaces with POE

supporting IEE 802.3af standards. Should support 2 ports of

1G SFP interface.

4 Switching Capacity: It should industrial grade switch which should operate at

wider temperature range, withstands greater shock,

vibrations, temperature and EMI/EMC tests. It should have

non-blocking wire-speed architecture.. It should be

architected to support real time applications like voice, video,

data by having distributed architecture. Should support IP20

rating.

5 Forwarding Rate: Each switch should have Forwarding rate of minimum 20

MBps on 64 bytes packets. 9K Jumbo frames

6 Switch fabric speed: Each switch should have non-blocking switching capacity of

14 Gbps or more

7 Power supply: 230 V/ ac 50Hz Internal power supply, It should support

Redundant Power Supply

8 VLAN support a. Minimum 255 static VLANS

b. VLAN Double Tagging

c. Dynamic VLAN support

d. 803. Guest VLAN

9 Security a. Private VLANs, providing security and port

b. isolation of multiple customers using the

c. same VLAN

d. 803.x support

e. MAC-based Authentication

f. Web-based Authentication

27

g. Dynamic VLAN Assignment

h. DHCP Snooping

i. ACL, STP, RSTP, MSTP support

j. BPDU Protection

k. STP

10 Features: a. IEEE 802.x Interface Standards

b. IEEE General Standards

c. SNMP/RMON/BOOTP/Telnet/Web

d. Network management protocols

e. Port trunking

f. Spanning tree, Priority tags

g. VLAN Tagging

h. Multicast Standards

i. Flow controls

j. MAC Based Network Access control


b. Out of band 10/100/1000 Ethernet

c. Management port and console

d. Management port, Both on the front panel

e. (For ease of access) are preferred.

f. Port mirroring

g. SSH and SNMP for secure management

h. RADIUS Support



13 Electrical Approvals

and Compliances:

EMC: FCC class A, VCCI class A IEC 60870-2-2 (operational

temperature)

IEC 60068-2-1 (temperature type test – cold)

IEC 60068-2-2 (temperature type test – hot)

IEC 60721-3-1: Class 1K5 (storage temperature)

IEC 68-2-30: 5% to 95% non-condensing humidity

IEC 60255-21-2 (mechanical chock)

IEC 60255-21-1 (vibration)


15 Accessories: Mounting hardware including connecting cables with Indian

Standard plug tops.

16 Dimensions: 19” Rack Mount (Mount Hardware included), Width: 1U

Height

17 Standards: FCC Class A, CE, cUL, TUV

18 Operating temperature Operating temperature -40°C to +75°C

Humidity (operating and storage) 5% - 95% System power

consumption (watts) should be less than 50W

Note: The Network Solutions i.e Switches and modules should be from single OEM.

28

13. 16-port 1G UTP PoE with 2SFP Fiber Uplink.





4 Switching Fabric Speed: Non-blocking switching backplane of 128Gbps or more, 9k

Jumbo frames







video, data by having distributed architecture.







Spares Mode, SSM,




9 Security j. Private VLANs, providing security and port isolation of


k. 803.x support

l. MAC-based Authentication

m. Web-based Authentication

n. Dynamic VLAN Assignment

o. DHCP Snooping

p. ACL, NAC support

q. BPDU Protection

r. STP , QoS

10 Features: h. SNMPv1,v2 & v3/RMON/BOOTP/Telnet/Web

i. Network management protocols

j. Port trunking

k. Spanning tree, Priority tags

29

l. VLAN Tagging

m. Flow controls

n. MAC Based Network Access control

11 Management f. GUI

g. Out of band 10/100/1000 Ethernet management port



h. Port mirroring

i. SSH and SNMP for secure management

j. RADIUS Support

12 Authentication c. RMON (4 groups)

d. Broadcast Forwarding.


Compliances:





14. Single mode 1G SFP LC LX Transceiver

1. Make Alcatel / Allied Telesis / Brocade / CISCO / Extreme/HP

2. Connector types LC

3. Standards supported 802.3z, SFP MSA

4. Connections supported 1000Base-LX

5. Fiber Type SMF

6. Wavelength 1310 nm

7. Optical Power Output -9.5 to -3 dBm

8. Receiver Sensitivity -20 dBm

9. Transmission Distance ∼10 km

10. Operating Temperature -40 ºC to 85 ºC / 0 ºC to 70 ºC

Note: The Network Solutions i.e Switches and modules should be from single OEM.

30

15. High End Client Systems


2 Processor Intel Xeon Processor E5-2630 v4 (10C, 2.2GHz, 3.1GHz

Turbo)

3 Chipset Intel® C612 chipset

4 Memory 16GB (2*8GB) DDR4 RDIMM ECC RAM, 8 Dimm Slots;Up to

256GB 2133Mhz ECC DDR4 Memory

5 Operating System Windows 10 Professional

6 Hard Drive 2TB 7200 rpm SATA HDD

7 Storage Controller Integrated: Intel AHCI 6Gb/s SATA controller with six ports

at 6Gb/s, two reserved for optical drives, Intel®

RSTe supports software RAID 0,1,5,10

8 Graphic Card NVIDIA Quadro M4000 - 8GB

9 Gigabit Network Port Intel Gigabit Ethernet controllers with

Remote Wake UP, PXE and Jumbo frames support

10 EXTERNAL

PORTS/CONNECTORS

Front : 3 USB 2.0, 1 USB 3.0, 1 Microphone, 1 Headphone,

Rear: 3 USB 2.0, 3 USB 3.0, 1 Serial, 2 PS2, 1 RJ45 (intel

Gigabit Ethernet)

11 Optical Drive DVD+/-RW

12 Keyboard & Mouse USB Based KBD & Mouse

13 Form Factor / Chassis Mini-tower with tool-less entry and maintenance with tool

free disk mounting and tool free PCI card installation features

, chassis should have integrated chassis handles

14 Security Trusted Platform Module (TPM 1.2); Intrusion switch;

Setup/BIOS Password; I/O Interface Security; Kensington®

lock slot, Padlock ring, Internal bezel lock; lockable power

supply

15 Power Supply Externally accessible, tool-less power supply, 80 Plus gold

certified, 90% efficient; (685W or higher)

16 Bays One external slimline optical bay, two internal 3.5” hard drive

bays; one external 5.25” bay

17 Software The hardware vendor should supply an automatic system

performance tuning software, which ensures optimum

performance tuning for leading CAD/CAM/CAE

18 Monitor 27 inch Monitor

19 Warranty Minimum 3 years comprehensive onsite Next Business day

warranty directly from the OEM

31

16. Storage 120 TB

1 Operating system Microsoft Windows Storage Server 2012 R2 Standard

Edition

2 Capability & Scalability The storage arrray should be offered with 120 TB and

Rack Mountable.

3 Drive types and capacities

SATA 7.2K RPM: 2TB, 4TB NL-SAS 7.2K RPM: 1TB, 2TB,

4TB, 6TB, 8TB, 10TBSAS 10K RPM: 600GB, 1.2TB SAS

15K RPM: 600GB

4 RAID Offered Storage Subsystem shall support Raid 0, 1,

1+0, 5 and Raid 6.

5 Architecture

Controllers shall be true active-active so that a single

logical unit can be shared across all offered controllers

in symmetrical fashion and should also provide fail

over path through alternate controller in case of

controller failure, while supporting thin Provisioning,

and Data Tiering

6 No Single point of Failure

Offered Storage Array shall be configured in a No

Single Point of configuration including Array

Controller card, Cache memory, FAN, Power supply

etc.

7 Performance and Reliability

Offered storage Array shall be provided with

necessary software for improved reliability and

performance.

8 Thin Provisioning

The storage should be configured with Thin-

provisioning without any impact on the performace of

the volume. If any performance impact with Thin

provisioning, the same needs to be highlighted with

the percerntage of performance impact

9 Snapshots

The storage should be configured with

snapshots/clones. If the licensing is perTB, then the

license needs to provided for the entire usable

capacity of the array

10 Tiering

The storage should be configured with Data Tiering

feature to ensure better utilization of the drives. All

the data should be written to the fastest drive & then

tiered up & down based on the usage.

11 Availability Hot-plug hard drives, hot-plug redundant power, hot-

plug redundant cooling, ECC memory

32

12 Warranty

The storage should be provided with 3 Years, 24x7, 4

hours, same day response on Hardware & software

directly from the OEM. The storage should be

configured with Phone-home feature for pre failure

alerts.

13 Preferred make Dell/HP/IBM/EMC/Netapp

17. Rack Mount Server


2 Processor

Server should be populated with 2Nos of Intel Xeon

E5-2630 v3 2.4GHz,20M Cache,8.0GT/s

QPI,Turbo,HT,8C or above.

3 Chipset Intel Series Chipset

4 Memory Min. 128GB RAM with 16GB LRDIMM, 2133 MT/s,

Quad Rank, x4 Data Width or above

5 DIMM Slots

Server should support 12 DIMM Slots,capable of

accomodating 384 GB RAM in total with using 32GB

Module.

6 Memory Property Advanced ECC memory protection, Memory

mirroring or Equivalent

7

Should support Mirroring & Fault Resilient Memory

or equivalent - Provides a protected memory zone

for a hypervisor without consuming half of the total

RAM in the system

8 Hard Disk 4 x 600GB 15K RPM SAS 12Gbps 2.5in Hot-plug

Hard Drive on Raid 5

9 Drives Server Chassis supports up to 8 LFF Hard Drives

10 Should support 3.5" SSD HDD bays in a 2U form

factor

11 RAID Controller

Integrated Hardware RAID controller and should

support Raid 0,1,5,6,10,50 and with upto 1GB NV

Cache

12 Optical Drive DVD-RW

13 Graphics Controller Minimum 16 MB Memory

14 Ethernet Ports

4 * 1 GbE multifunctional network ports with

support for iSCSI protocols

Flexible LAN - should be designed with flexible LAN,

which will offer various NDC, Network Daughter

Card, to provide users their desired LAN port

33

combination and favourable LAN controller

vendors.

based on future data centre needs.

15 FC HBA Should have one Dual Port FC HBA Card 16GB FC

16 PCI Slots Up to 4 PCIe Gen3 slots + 1 RAID slot + 1 NDC slot

17 Remote Management

Ability to remotely configure machines completely

via command scripts with Advance Settings Utility ,

Should have IDRAC ( or equivalent ) Enterprise Port

card.

should support Local & Remote management- LC,

LCD with ZeroTouch automates low value tasks.

Dynamic workload orchestration 3rd Party

Integration

18 Redundant Power Supply 1+1 Power Supply, Redundant Configuration, 750W

19

Redundant Cooling Fans

Hot-Swap redundant cooling fans. Fans should

automatic

adjust speeds depending on the temperature inside

the server chassis

20 Failure Alerting Mechanism

The server should be able to alert impending

failures on maximum number of components. The

components covered under alerting mechanism

should at least include Processors, memory, PCIe

slots, VRMs, power supplies, fans, hard disk drives

21 Cluster Support Should support High Availability Clustering

22 Form Factor 2U

23 OS Support & Certification

Supports

Microsoft® Windows Server® 2012 R2 (includes

Hyper-V®)

Microsoft Windows Server 2012 (includes Hyper-V)

Novell® SUSE® Linux Enterprise Server

Red Hat® Enterprise Linux®

VMware vSphere® ESXi™

Certified with Windows / RHEL / Suse Linux

24 Remote access Should have dedicated management port for remote

access

25 Server Management

The server should come with systems management

licensed software with Virtualization Management

Integration into virtual consoles

34

VMWare Integration- Spectre

System Center VMM Integration

other features,should have dedicated port for

management

26 Warranty

3 years Comprehensive onsite warranty directly

from the OEM with 24x7 support. Prefailure

warranty on CPU, Memory & Hard disks

27 Delivery

All the necessary tools & tackles licenses, cables /

connectors for Ethernet / Fibre / USB / Power etc.

required for making the system operational shall be

provided by the bidder.

28 Fresh Air Support

Should Sustain operation, even when the Room

cooling is compromised. Should have Fresh Air

Support or equivalent

29 Rails Must be supplied with cable management arms and

rails to rack mount the servers

18. Digital Video Management Software - Enterprise Level 4 supporting up to 100

Cameras or above with 7 license

Make: Camera OEM, Milestone, AxxonSoft

FEATURE

a. The surveillance system shall provide a highly scalable and reliable platform to

enable customized, network-based surveillance applications

b. Capable of handling multi-vendor products, including Axis, Bosch, Honeywell,

Panasonic, Pelco, Sony and Videotec. The surveillance system shall be open standard

supporting multiple vendor IP cameras and encoder manufacturers within the same

system. The system shall support seamless integration of all ONVIF compliant

cameras

c. Licence to handle/manage/add multiple cameras based on scalability.

d. Open architecture.

e. Video compression: H.264 (MPEG-4 Part 10/AVC) & MPEG4 (Part-II)

f. The system shall support digital pan-tilt-zoom on live or archived video.

g. The surveillance system viewing system should be in thick client for local viewing

and thin client through http browser for remote viewing.

h. Both thin and thick client shall provide the capability of viewing single or multiple

live and archive cameras, control PTZ camera.

i. The proposed surveillance system can be supported by the existing network

35

infrastructure

j. The system shall support the scalability of additional camera installation beyond the

originally planned capacity. One single Video Management system shall be

expandable to 2000 cameras.

k. The proposed video management system shall support deploying the software on

Virtual servers, thus minimizing the hardware foot print for the project.

l. The system shall have capability to stream video at remote sites by optimizing the

bandwidth on WAN.

m. The system shall be able to trace the end to end video traffic and shall be able to

pinpoint the problematic nodes on the network that will affect the quality of video

being streamed from the camera to servers.

n. Simplify trouble shooting with end-to-end visualization of video flows and on-

demand.

o. The Video display shall be intelligent that can automatically change view based on the

event such as motion started/stopped, video analytic, camera digital input contact

closed/opened,

p. The system shall provide for integration with other software applications through an

open and published Application Programming Interface (API). Such applications shall

include, but not be limited to, access control, video analytics, and other alarm and

sensor inputs.

q. The system shall support the Redundancy/Fail-over feature in case of failure of

NVR/Camera server the relevant cameras shall automatically switch over to the

redundant NVR/Camera Server.

r. The system shall have a centralized server that will be installed at Primary Data

Center for all configuration and access management. The system shall have the

capability and facility to distributed architecture in the future.

s. System shall have both video management and video stream storage management.

Recording frame rate, resolution, bit rate with respect of individual channel shall be

programmable.

t. The system should ensure that once recorded, the video cannot be altered; ensuring

the audit trail is intact for evidential purposes.

u. The area under surveillance shall be monitored and controlled through workstations

and Video display Monitors.

v. The system must provide a built-in facility capable of embedding digital signature for

irreversibly embedding information to the video to ensure tamperproof recording.

w. In order to optimize the memory, while recording, video shall be compressed using

MPEG-4, Motion JPEG, H.264 or better standard over the network and can be viewed

on the control room workstation.

x. The system software shall support flexible 1/2/4/16 Windows split screen display

36

mode or scroll mode on the PC monitor or on Video preview monitor as per site

requirement.

y. Minimum two Servers should be provided for DVMS processing of 125 Cameras.

Storage and bandwidth calculation should be provided along with bid. Additional

server if required for managing above mentioned cameras should be the

responsibility of the bidder. Preferable CPU utilization of the DVMS server should not

exceed 65%

z. The proposed DVMS package should be a 64 bit application, supporting 64 bit OS and

hardware features.

Administration

a. Software shall support naming and labeling cameras

b. Auto search and detection of cameras

c. Configurable camera settings

d. Ability to display information on multiple monitors

e. Support for multiple servers, sites and clients

f. Bandwidth optimized multi-streaming

g. Configuring live video and recording mode

h. Support for future integration of cameras/servers.

i. Dashboard display of system status

j. Ability to backup & restore system databases/recordings.

Preview

a. Support for different frame rate on preview and recording

b. Live view of minimum 16 cameras or better simultaneously, User definable split

c. Live views, Single camera pop up

d. Camera selection by double-clicks or drag and drop from, site maps, Tree View

e. Minimum 5 programmable camera view sequences on monitoring display

f. Web client for remote viewing, playback & search

g. Create snapshot images on-the-fly and as an event index for search later on

h. Split screen option with multiple camera previews

i. Zoom in/out on live view and playback

j. Audio

k. Full duplex real time audio support.

l. User should have 1-to-1 or 1-to-many audio broadcast to multiple devices

at the same time

m. Mute function

n. Control of PTZ cameras and pre-set positions using mouse & joystick

o. Display map with all camera preview on.

p. Device states shown by icons, including network connection loss, video loss, and

camera de-adjustment Image Enhancement Feature, motion detector, unattended bag

37

gages, etc.

q. Full screen preview

Search

a. Shall search video clips in servers, Storage unit & Tape library with date, time,

Channel, event/alarm

b. To search motion detection, digital input, bookmark, snapshot, event with specified

date, time, channel

c. To search video clips with thumbnail image previews

d. To search events on video loss/recovery, network disconnect/reconnect, user

e. Login/logout database log with specified date, time and channel.

f. The recording and events should be displayed with a time-bar; user may click on the

bar to start playing the recorded archive.

g. To display snapshots in thumbnail view; user should browse the snapshots then Click

to start playback video clip at that time stamp

PTZ Control

a. To manage pan, tilt, zoom operation with speed control.

b. Go to, set, clear pre-set positions and patrol on pre-set positions, Set multiple

Patrolling schedules per camera per day, pause PTZ patrolling and control the

Movement manually.

c. Support for proprietary protocols of at least the camera manufacturers mentioned in

the tender (AXIS/BOSCH/HONEYWELL//PANASONIC/PELCO/SONY/ VIDEOTEC) is

preferred

d. User-defined PTZ command to support additional PTZ protocols.

e. On-screen 8-direction PTZ operation with mouse operation.

f. Joystick/ Control Panel on PC - To connect control on the PC via COM/USB port to

control speed dome directly.

Playback

a. Shall play back recorded video/audio from servers, Storage unit & media library Play,

Pause, Stop, Fast Forward, Fast rewind, Play Backward, Play frame by Frame, variable

Speed Control, selective zooming in playback mode.

b. Provision to play multiple files in sequence for a period of time.

c. To create snapshot images on-the-fly and can be used as a search index

d. To export a period of video clips into various formats including .avi/ .wav/mpg file

Printed report with time and date stamp as image/video file.

e. The system software for clients should also be working on a browser based system

for remote users. This will allow any authorized user to display the video of any

desired camera on the monitor with full PTZ and associated controls.

f. The system administrator should be able to add, edit and delete users with rights. It

shall be possible to view ability or rights of each user or the cameras which can be

38

viewed and controlled as per the permission assigned by the administrator.

g. The system shall support local administration role. Each local administrator shall be

able to add, manage and remove local users.

h. The system shall support the map capability. The map shall have hierarchy with the

root map at the top, and then the lower level of maps based on the locations. They

system shall allow the importing of the user maps in the format of JPEG, GIF, PNG,

BMP, TIFF. Allow user to choose camera icon from map to view recorded with the

capability to play, pause, stop, fast-forward, rewind, and play recorded video from

preset time

Recording

a. Simultaneous digital multi-channel video/audio recording on servers, Storage unit &

Media library

b. Unlimited recording storage support.

c. The system shall provide the facility of viewing, recording and replay simultaneously

and shall be capable of frame by frame analysis.

d. The offered system shall have the facility to export the desired portion of clipping on

CD, DVD or any storage device. Viewing of this recording shall be possible using

standard media players

Schedule Recording

a. To record video with user-defined schedule and time Period. Recording can be

scheduled per camera, be set for continuous upload, per weekday or specific dates, up

to 10 recording schedules with holidays and exception days, per camera settings for

minimum and maximum recording times, per camera, per recording schedule frame

rate and quality settings.

Alarm Recording

a. Configurable pre-and post-alarm buffering, alarm priority handling, selective auto-

popup on alarm, alarms displayed in separate alarm window, Email or SMS notification

on alarm. User-defined time period to record before and/or after a certain event occurs.

Motion Recording

a. Advanced motion detection with exclude filter for image areas of no Interest. Different

day and night settings, camera-based motion Detection, option to save on bandwidth

“No motion” detection.

b. It should provide programmable motion detection and recording, to be defined area-

wise. The system must be able to support video motion detection algorithms to detect

moving object or person

Watermark

a. Digital time code embedded from hardware and logo of the centre/unit

39

Archiving

a. Recordings can be moved daily to remote storage (SAN/NAS/Auto Tape/disk loaders)

Notification in event log and via e-mail for alarm, no signal from Camera, Full hard disk

and archiving failure

Tampering of Recording

a. Tamper proof with password protection

b. Image Integrity checking feature

c. Warning on unintentional delete or alter to recorded images

Event Types

a. Alarm events

b. Device events (e.g. video loss)

c. System events (e.g. disk full)

d. Network disconnection events - SNMP traps from network devices (eg.heavy network

traffic),

e. User events (e.g. logon failure)

f. Schedule events (e.g. every Tuesday at 10:15), etc.,

g. Compound events (combining events with Boolean logic),

h. Mini-preview window should be popped-up when event occurs. Event should be

acknowledged by security operator. Pop-up window should be dismissed when User-

defined dwell time elapsed or security operator clicks on the “Dismiss” Button.

Hot-Spot Window

To activate and switch the channel with event to the hot-spot Window. The original video

in the hot-spot window should be switched over.

a. To trigger digital output when certain events (digital I/O or motion detection) Occur.

b. Triggered event should be recorded into an event log.

c. Provision to configure the following when an event occurs

d. To play user-defined audio file or beep on the machine.

e. E-Mail/FTP Notification with snapshot.

f. It shall request the camera to go to certain PTZ pre-set position.

g. To execute user-defined commands/operations.

User Access Control

a. Multilevel user/group profiles including Administrator/User/Guest levels.

b. Configurable permission control for camera group/user.

c. Restrict access to playback and export for users.

Logs

a. Password protection for accessing the various logs.

b. All events, filter by camera/date/time/user/location.

c. Audit log, camera event and user access logs.

40

d. Alerts from unintentional deletion of logs.

e. Configurable Report Generation

Support protocols

IPv4/v6, HTTP, FTP, SMTP, UPnP, SNMP, RTP, TCP, UDP, IGMP, RTCP, ICMP, SOCKS,

DHCP, HTTPS, NTP, SSL, TLS, SRTP, SSH, QoS, etc

19. 9 U Rack with Accessories

Make : APW President / Liebert/Rittel

Standard for compliance

Conforming to DIN41494 and current industry practices

Construction

• Cooling fans

• cable management and mounting accessories

• AC mains channel

• Cable Manager, 1U, 19”

• ROD Loops – 4Nos,

• PDU Octagonal Socket 6 x 5/15 Amp with 16 Amp MCB - 2Nos

20. 27U Rack with Accessories

Make : APW President / Liebert/Rittel

Standard for compliance

Conforming to DIN41494 and current industry practices

Construction

• Cooling fans (4 x 90 cfm)

• cable management and mounting accessories

• AC mains channel

• caster wheels with brake - 2 pairs

• Cable Manager, 1U, 19”

• ROD Loops – 4Nos,

• Equipment shelf (575mm depth/600 mm width) with angles – 2 nos

• Earth continuity kit

• Hardware Mounting Kit Packet of 20 – 2Nos

• PDU Octagonal Socket 6 x 5/15 Amp with 16 Amp MCB - 2Nos

21. Fibre reinforced pole for mounting cameras

• Material : Fiber Reinforced Plastic (FRP)

• Height : 6 m

• Diameter : 150 mm

• Thickness : 8 mm or better

• Wind loads : capable to withstand wind loads as per IS 875

• Colour : Grey preferred

41

22. Pipe earthing

• Standard pipe earth with 3.75 m long, 38mm dia, medium class GI pipe, conforming to

IS: 3043 with chamber etc as per the enclosed drawing. Pipe earth used for earthing

shall be without joints. The item includes interconnecting 10SWG copper wire also.

23. XLPE Insulated Armoured Aluminium conductor cable

• Make: Finolex / polycab / Havells / Torrent/Nicco, Universal

• Specification : 1.1kV grade, 4 Core, 4 sq mm, XLPE insulated and PVC overall sheathed,

stranded aluminium conductor, flat steel strip / wire armoured cables conforming to IS:

7098 / Part I (with latest Amendments). The cable shall bear ISI certification mark and

sequential marking of length at every one meter

24. Surge protectors for power line

• Make : Emerson / MTL / OBO-Bettermann /Schneider/ Atlantic Scientific. MOV

technology for L to N and Spark Gap for Neutral to Protective Earth. Supply voltage

230V, 50 Hz:

• Nominal Discharge current (8/20 micro sec) : 20kA and 50kA

• Voltage protection level : 1300V and 1200V

• Response time : <100 nano sec.

25. Surge protectors for network (Camera end)

Make: Emerson/MTL/OBO-Bettermann/Schneider/Atlantic Scientific . CAT 5/6, POE

compatible

Operating Voltage: 48 V dc

Maximum operating Current: 1A

Peak Surge Current: 6KA

Frequency Range: 0–500 MHz

Insertion Loss: < 0.1 dB at 20 MHz

SPD Technology: Silicon Avalanche Diode (SAD)

Connection Type: RJ-45 Jacks

Operating Temperature: -40°C to +85°C Outdoor Protection : Should be IP 66 Compliance

26. Surge protectors for network (Inside outdoor enclosure)

Make: Emerson/MTL/OBO-Bettermann/Schneider/Atlantic Scientific CAT 5/6, POE

compatible

Operating Voltage: 48 V dc

Maximum operating Current: 1A

Peak Surge Current: 6 kA

Frequency Range: 0–500 MHz

Insertion Loss: < 0.1 dB at 20 MHz

42

SPD Technology: Silicon Avalanche Diode (SAD)

Connection Type: RJ-45 Jacks

Operating Temperature: -40°C to +85°C

Pipe earthing, including interconnections using suitably rated copper wire/strip

27. Outdoor Kiosk.

Make : APW President / Liebert/Rittel / R&M

Dimension of cabinet : 600mm W x 600mm D and 15U Usable Space.

Construction : Cabinet shall be of rigid welded construction with steel frame architecture to

bear at least 150kg load should be made of 1.5mm thick HDG OR CRCA IS: 513 Grade Steel.

Security : . Vandal proof design. Inside of the Cabinet should not get an access without

opening the Door lock with key. L type Pad lock arrangement for secondary locking

arrangement. PU Moulded non removable gasket arrangement provided at door on sealing

of dust & water. IP Rating : IP 56 or higher .

Front Sheet Steel Door with lock arrangement, and sides with cutout for fan filter unit on

the both sides .230V AC, 90 cfm fan. Fully Single Wired. Outlet Filter 2 Nos.

Cable Gland : Cable entry Gland box with PG Gland (Min 10 Nos) ,Mounting angle : Depth

wise reversible 19” angles (front and rear pair) with U marking screen printed in Black

color provided for equipment mounting.

Canopy : Slanted Rain Canopy PDU : PDU 1U 6 X 5/15Amp Socket divided into two circuits

with 16Amp MCB for providing Raw power and UPS output.

Plinth : Plinth (100mm) at the bottom for floor .

Mounting : The outdoor kiosk mounting details should be provided by the manufacturer.

Details are to be approved by VSSC before installation.

28. Online UPS - 6KVA

Make : Emerson, Numeric, PowerOne, Merlyn Gerin ,Eaton, GE.,APC, Socomac.

Phase : 1 phase ip & 1 phase output

Capacity : 6 KVA

Design : True Online double conversion design with output isolation transformer

Nominal I/P voltage : 230V AC (1 PHASE + N)

Nominal I/P Frequency : 50 HZ

I/P Power factor : > 0.99 at O/P power factor .8

Type of rectifier : IGBT based PWM Rectifier

43

I/P Voltage Range 110 VAC to 300 VAC on 50% load and 160VAC to 300 VAC on full load

Battery Type : SMF

Battery Make: Exide /Amaron

Nominal Battery voltage : 12V

Backup Time : Minimum 30 Min at full load

Load Power Factor : 0.8

Nominal Output Voltage : 230 +/-5% VAC

Output Frequency : Frequency Range(BaH Mode): 50Hz ± 0.1Hz ; frequency Range (sync Range):

46Hz ̴ 54Hz @ 50Hzsystem

Output waveform : Pure Sine Wave

Retransfer(Bypass to Inverter) : Zero

Automatic static Bypass switch : Inbuilt

Enclosure Protection Grade : IP 20

Display Panel : UPS Status, Load level, Battery level, Input/Output voltage etc

Sound Indications : Battery mode, Low Battery, Over Load, Faulty condition.

RoHS , CE Certifications : Required

ANNEXURE IV

Figure 1

Figure 2

ANNEXURE-V

TYPICAL ARRANGEMENT OF PIPE EARTHING (CED/ELE/S/3/R)

ANNEXURE VIII Price Breakup Format

Sl.


Rate for supply & installation

including testing


1 Indoor Fixed Camera, Make:

AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/ SONY 49 Nos

2 Indoor Fixed Panoramic/ Fish eye Camera, Make:

AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/ SONY 5 Nos

3

Outdoor Heavy duty, Pan/Tilt, Day and Night vision camera

with External IR Illuminators Make:

AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/ SONY

1 No

4

Outdoor Fixed Night vision camera with IR Illuminators

Make: AXIS/BOSCH/HONEYWELL/PANASONIC/PELCO/

SONY

6 Nos

5 Workstation with High end Graphics

Make: Dell/IBM/HP/Lenovo 1 No

6 55” Ultra HD LED Display System with HDMI Cable and Wall

Mounting Kit 2 No

7 Joystick for PTZ control with all accessories 1 No

8 24 port SFP L3 manageable switch. Make: Alcatel/Allied

Telesis/Brocade/CISCO/Extreme/HP 1 No

9 24-port 1G UTP PoE with 2 SFP Fiber Uplink. Make:

Alcatel/Allied Telesis/Brocade/CISCO/Extreme/HP 1 No

10 24-port 1G UTP with 2 SFP Fiber Uplink. Make:

Alcatel/Allied Telesis/Brocade/CISCO/Extreme/HP 1 No

11 8-port 1G PoE UTP 2 SFP Fiber Fiber Uplink. Make:

Alcatel/Allied Telesis/Brocade/CISCO/Extreme/HP 6 Nos

12

8-port 1G PoE UTP with 2 SFP Fiber Uplink Industrial grade

switch. Make: Alcatel/Allied

Telesis/Brocade/CISCO/Extreme/HP

3 Nos

13 16-port 1G PoE UTP 2 SFP Fiber Fiber Uplink. Make:

Alcatel/Allied Telesis/Brocade/CISCO/Extreme/HP 2 Nos

14 Single mode 1G SFP LC LX Transceiver 24 Nos

15 High End Client system with Graphics


16 Video Management Software minimum 100 channel license

and software support and upgrade cost for 3 years 1 No

17 Rack mount server


18

Storage system 120 TB Make :

Dell/HP/IBM/EMC/Netapp

1 No

Passive components Make: AMP / Clipsal / Belden / HFCL /

Krone/Molex/R&M

19 Rack Mount 12 port single mode loaded fibre patch panel

loaded with sufficient LC couplers & pigtails. 9 Nos



22 CAT6A RJ45 high quality Jack with boot 75 Nos

23 Face plates with mount box 75 Nos

24 9U Rack with accessories 9 Nos

25 27U Rack with accessories 1 No

26 Online UPS 6KVA 1 No

27 9/125 SM OS2, Indoor 12 core Fibre cable, LSZH, OFNR 1500 Mtrs

28 Outdoor Fibre Cables, Loose-tube, Gel-filled, 9/125 SM OS2

Corrugated Steel tape Armoured 1050 Mtrs

29 LC-LC Style SM patch cord 2M length 24 Nos

30 CAT6A cable – supply and laying as with suitable size PVC

conduit thru wall / existing Trenches 3939 Mtrs





35

1.1 kV Grade 3 Core x 2.5 Sq. mm stranded (3 Strands of

0.83mm each, total 9 strands) Copper conductor Armoured

XLPE insulated and overall sheathed armoured Cable with

ISI Certification as per IS 1554/IS 7098 [Make :

FINOLEX/Nicco/Gloster/ INCAB/Universal)

600 Mtrs

36 Surge protectors for power line 4 Nos

37 Surge protectors for network (camera end) 3 Nos

38 Surge protectors for network(inside outdoor enclosure) 3 Nos

39 Outdoor Kiosk. Make: Rittal, APW 3 Nos

40 Fibre reinforced pole for mounting cameras 3 Nos

Furniture

41 Rolling Chair


42 Computer Table


Part II – Comprehensive AMC Charges (for four years from the date of expiry of performance warranty)

43 Comprehensive AMC charges

44 Year I 1 Lot

45 Year II 1 Lot

46 Year III 1 Lot

47 Year IV 1 Lot

48 Onsite support cost (optional) 1 Lot

IP-BASED CCTV SURVEILLANCE SYSTEM FOR ELIX/LMIG/ISDTF · As part of strengthening security, it is...

Documents

Transcript of IP-BASED CCTV SURVEILLANCE SYSTEM FOR ELIX/LMIG/ISDTF · As part of strengthening security, it is...