Introduction Of Solar Car
description
Transcript of Introduction Of Solar Car
Before directly going to the solar powered car project, let us study
some basics of solar cells and motor actions. The goal of -DC
electrical motor powered by solar panel circuit given below, is to
drive a DC motor using a solar panel and hence demonstrate how we
can use the solar power directly in particular applications. We are
describing about a solar powered car, which is the best example for
the application level illustration of DC electrical motor powered by
solar panel.
Light weight wood or polystyrene foam
Axels (4 Nos)
Wheels (4 Nos)
Eye Screws (4 Nos)
Gum
Adhesive material and Tape
Screw driver
DC Motor
Solar Panel
Gears or pulley
Marker and Knife
Batteries and holder
Body : Aerodynamics
A shape that release the least resistance to the flow of the air.
If the object was adjusted, the flow of the air around the
object will smooth and cause less drag.
I. Downforce
The rounded and tapered shape of the top of the car is designed to slice through the air and minimize wind resistance. Detailed pieces of bodywork on top of the car can be added to allow a smooth flow of air to reach the downforce-creating elements.
II. Bernoulli’s Principle
A physics principle that increase in the speed of a fluid produces a decrease in pressure and that a decrease in the speed of a fluid produces an increase in pressure. The principle states that the total energy of a moving fluid remains constant at all times. Therefore fluid pressure is inversely proportional to fluid velocity.
Height : 23.5cm
Width : 6cm
Weight : 70g
Tyre diameter : 3.1cm
Solar
Panel 1
Solar
Panel 2
Solar
Panel 3
Solar
Panel 4
Solar
Panel 5
Solar
Panel 6
Solar
Panel 7
Solar
Panel 8
Solar
Panel 9
Solar
Panel 10
Solar
Panel 11
Solar
Panel 12
Motor[ Parallel Circuit Diagram]