Top of FormAssessment Name:-Introduction to ControlLogix

Assessment Description:-Introduction to ControlLogix test from Computer Based Training CD (CBT) offered by Business Industrial Networks. Also know as the CLXTrainer CD.

Top of FormQuestion For You:For PLCs on different network types _ ControlLogix ___________________________________.

Select Answer

can perform as a communications gateway between networks if used as a Producer/Consumer network model

cannot perform as a communications gateway between networks.

can perform as a communications gateway between networks.

Bottom of Form

Question For You:The programming environment used for the ControlLogix system is

Select Answer

RSLogix 500

RSLogix 5

RSLogix 5000

Question For You:ControlLogix processors are capable of running 1 continuous task and _______ periodic task.

Select Answer

32

64

31

Question For You:Select the correct answer: The programming languages available for use with ControlLogix are ___________.

Select Answer

Ladder Logic programming _Sequential Function Chart Programming _Structured Text programming and Function Block Diagram programming.

Ladder Logic programming _ Sequential Function Chart programming _ Function Block Diagram Cascading Block Diagram .

Cascading Block Diagram _ Ladder Logic programming _ Sequential Function Chart programming _ Structured Text programming

Question For You:The ControlLogix system ________allow the mixing of I/O_legacy controllers and networks.

Select Answer

will if used only in the Producer/Consumer network model.

will

will not

Question For You:The Producer/Consumer network model __________________________.

Select Answer

does not require a connection ID at the beginning of the data packet from the Producer

places a connection ID at the beginning of the data packet from the Producer

places a connection ID at the end of the data packet from the Producer

Question For You:Use of the Producer/Consumer network model _____________________.

Select Answer

can only be polled on a time base.

allows individual modules to produce data after being polled by a controller.

allows individual modules to produce data without having been polled by a controller first.

Question For You:Select the incorrect answer: Multi-Tasking Multi Discipline allows the controller to ____________________.

Select Answer

32 periodic task

handle 32 task _ one continuous and 31 periodic

handle 32 continuous tasks

Question For You:The user may perform flash upgrades to ________________________.

Select Answer

the firmware version of any ControlLogix module

the firmware version of the Logix 5563 processor and higher.

the firmware version of just the Logix 5550 processor

Question For You:Motion control is ________________.

Select Answer

not embedded into the ControlLogix system.

is used only with a redundant processor.

embedded into the ControlLogix system.

Top of FormAssessment Name:-ControlLogix Architecture

Assessment Description:-ControlLogix Architecture test from Computer Based Training CD (CBT) offered by Business Industrial Networks. Also know as the CLXTrainer CD.

Top of FormQuestion For You:Which of the following is incorrect about project files.

Select Answer

The controller name can be changed.

When the file is saved under a different name the controller name will also change.

The file name is also assigned as the controller name.

Bottom of Form

Question For You:The project is made up of _____________.

Select Answer

Task_I/O Configurations_Data Types

Task_Programs_Routines

Tasks_Main_Sub-Routines

Question For You:How many programs may be assigned to 1 task?

Select Answer

32

1

31

Question For You:What is the name of the memory location where data is stored?

Select Answer

Element

Array

Tag

Question For You:What are the 4 different tag types?

Select Answer

SINT_DINT_REAL_BOOL

Base_Alias_Consumed_Produced

Base_Alias_Bool_DINT

Question For You:What are the 3 different types of structures?

Select Answer

Single Array_Double Array_Triple Array

Continious_Periodic_Control

Predefined_Module-defined_User defined

Question For You:How many elements are in an array with a tag name of Batch_1 and a data type DINT[4, 6, 3] ?

Select Answer

72

120

13

Question For You:The members within a structure are addressed by ___________________.

Select Answer

Using the member name and a period followed by the tag name

Using the tag name and an underscore mark followed by the member name

Using the tag name and a period followed by the member name

Question For You:The members within a structure are addressed by ___________________.

Select Answer

Using the member name and a period followed by the tag name

Using the tag name and an underscore mark followed by the member name

Using the tag name and a period followed by the member name

Question For You:How many elements are in an array with a tag name of Data_5 and a data type DINT [9]?

Select Answer

9

3

27