Intra- and Extraoral - MEDIPRO | Medipro … Intra- and Extraoral For every treatment technique...

Extraoral Appliances ........................................................................................................................ Page 260

Elastic Auxiliaries ............................................................................................................................. Page 268

Oral Screens...................................................................................................................................... Page 273

OrthoSafe Sports Guard .................................................................................................................. Page 274

SUS2 - Sabbagh Universal Spring .................................................................................................... Page 275

Herbst® Bite Jumping Hinges .......................................................................................................... Page 277

Accessories ....................................................................................................................................... Page 281

252

Intra- and Extraoral

tomas® – Anchorage System

magic® – Lingual System

Brackets

Buccal Tubes

Bands

Adhesives

Wires · Arches · Accessories


Supplies

Expansion Screws

Orthodontic Acrylics

Pliers · Instruments

Equipment

Dynamics of Orthodontics, o-atlas

Courses

Service

Intra- and Extraoral Appliances For every treatment technique

253


254


For every treatment technique

Intra- and Extraoral Appliances

Complete ordering program Covering all areas of treatment Dentaurum’s complete program of intra- and

extraoral products ranges from simple elastics or separators for intraoral use to neck bands and innovative appliances such as the well proven Herbst® Bite Jumping Hinge or the inno-vative Sabbagh Universal Spring (SUS2). Giving the practitioner a variety of choices for this particular segment.

Good quality Safety for both practitioner

and patient During the development, production and selec-

tion of all intra- and extraoral products, great care is taken in order to comply with the pro-verbial Dentaurum quality. Not only does this guarantee a high degree of assurance for the practitioner and patient, but it also enables time saving and effective application.

A selection of our product program

Dentalastics® plastic chains and ligatures To secure arches and brackets Dentalastics® plastic chains and ligatures are available in many sizes and colors,

according to use and patient preference.

Dentalastics® separators For quick and easy separation of teeth Dentalastics® separators are available in various diameters for anterior and

posterior teeth. With x-ray contrast effect for easy identification in x-ray pictures.

Elastic auxiliaries Available in many colors, diameters and in various forces This assortment also has a large selection of different varieties. Together they

are all of excellent quality and marked by their high elasticity and low fatigue. Apart from the various colors, diameters and forces there are also latex-free alternatives for patients with latex allergies.

“Elasto-Force“ plastic chains With and without connectors ”Elasto-Force“ and SUPER ”Elasto-Force“ plastic chains are available in various

colors and pull forces, with and without connectors. The “Super” variation’s distinct properties are its consistent pull force and long period of effectiveness with high elasticity and good Shape-Memory-Effect (elastic recovery).

255


Optimized design Excellent stability with

unrestricted jaw mobility The modified dual-funnel design of the telesco-

pic rod head combined with the new conical design of the arch adapter provides maximum transversal mobility with ideal sagittal stability. The universal size and simple, progressive acti-vation ensure efficient handling.

Dual function One appliance –

multiple indications Due to its dual function principle the SUS2 can

be used for a great variety of indications, eg ventral jumping of the bite (Herbst® effect), molar distalization (headgear substitute) or temporomandibular dysfunctions. All types of treatment have the added advantage of excel-lent patient comfort.

Herbst® is a registered trademark of Dentaurum.

Improved treatment for Class I !

256


257


The SUS2 – Sabbagh Universal Spring is a telescope unit with a spring for universal intermaxillary use. It produces constant, mainly horizontal forces when the mouth is closed. The SUS2 is gentle on the temporomandibular joints and helps to avoid extractions and dysgnathic operations.

SUS2 – Sabbagh Universal Spring Indications:

Ventral jumping the bite for correcting distoclusions (activator effect, Herbst® effect)

Unilateral distoclusion/ laterognathia

Molar distalization (headgear substitute)

Space closing (aplasia)

Dentoalveolar compensation of the occlusion (elastics substitute)

Temporomandibular dysfunction (repositioning effect)

SUS2 – Sabbagh Universal Spring The ideal solution for patients with:

Poor cooperation

Minimal residual growth

Illnesses of the upper respiratory tract or asthma

Allergy to acrylic components

258


Active treatment period: 6-8 months Fast therapy It usually takes six to eight months to achieve

a neutral relation. The best time to start treat-ment is in the middle of the growth spurt at puberty. The concluding retention period with a removable appliance will also be short.

Fixed therapy 100 % patient compliance A well-known topic: poor patient compliance

and as a result more time-consuming and less effective therapy. The solution with Herbst® guarantees that the appliance will be worn. This form of therapy is also more convenient for the patient, because it is unnecessary to wear the uncomfortable and unsightly headgear.

Herbst® is a registered trademark of Dentaurum.

Safe, proven, effective

The fast therapy for distal occlusion

259


Herbst® Bite Jumping Hinges Classic correction of distal occlusions Dentaurum‘s program consists of 4 variations to the well proven Herbst® bite jumping hinge. They all share the

same high mechanical stability and very good design, which enables them to withstand considerable forces and still have enough reserves for an effective orthodontic treatment.

Herbst® IV Bite Jumping Hinge The modified Herbst® bite jumping hinge. Base and socket hinge with ”C“ clip for great lateral movement and greater patient comfort.

With ball and socket joint High degree of movement of the lower jaw This solution with a small head offers a new dimension of lower jaw movement in therapy with Herbst® bite

jumping hinges. The Herbst® IV ball and socket joint is far more comfortable for the patient.

With C-clips Secure therapy The C-Clips have eliminated two weak points in the classical model of Dentaurum Herbst® bite jumping

hinges: time-consuming screw placement and screws accidentally coming loose. This type is easier to handle but most of all it offers more security.

Herbst® I Bite Jumping HingeThe modified Herbst® bite jumping hinge. Base and socket hinge with ”C“ clip for great lateral movement and greater patient comfort.

Available for band and cast techniques Flexible and individual therapy Depending on the experience and the goal of the orthodontist, the Dentaurum Herbst® technique can be used

for band or cast techniques. This means maximum flexibility and allows customised applications.

Herbst® II Bite Jumping Hinge The modified Herbst® bite jumping hinge for use with fixed appliances.

Herbst® TS Bite Jumping Hinge This model is fitted with an internal telescope, which prevents the hinge from sliding apart.

260

High-Pull Headgear with Safety ModulesThe traction modules on the cervical pads and high pull headgear help to prevent accidental dislodging of the face bow. When a pulling force exceeds (approx. 2.5 - 3 kg / 5.5 - 6.6 lbs.) the traction modules separate automatically disengaging the face bow, preventing any whip-back (e.g. of the face bow). Reassembly is easy for either patient or parent. The traction module released by the clip is simply pushed back into position. Headgear should always be used with safety modules.

Items supplied: High-pull headgear in blue denim material with safety modules.

Spring force: light to 4.5 N (450 g)

Module: white High-pull headgear: blue denim

745-024-00 1 piece


Extraoral Appliances

Spring force: medium to 6 N (600 g)

Module: dark blue High-pull headgear: blue denim

745-025-00 1 piece

Spring force: strong to 7.5 N (750 g)

Module: light blue High-pull headgear: blue denim

745-026-00 1 piece

High-Pull Headgear without Safety ModulesHeadgear and neck pads must always be used with safety modules.

High-pull headgear: blue denim

745-027-00 1 piece

High-pull headgear: blue cotton 745-031-00 1 piece

261

High-Pull Headgear without Safety ModulesHeadgear and neck pads must always be used with safety modules.

High-pull headgear: pink cotton

745-032-00 1 piece



Neck Pad with Safety ModulesThe traction modules on the cervical pads and high pull headgear help to prevent accidental dislodging of the face bow. When a pulling force exceeds (approx. 2.5 - 3 kg / 5.5 - 6.6 lbs.) the traction modules separate automatically disengaging the face bow, preventing any whip-back (e.g. of the face bow). Reassembly is easy for either patient or parent. The traction module released by the clip is simply pushed back into position. Headgear should always be used with safety modules.

Items supplied: High-pull headgear in blue denim material with safety modules.


Module: white Neck pad: blue denim

745-020-00 1 piece


Module: dark blue High-pull headgear: blue denim

745-021-00 1 piece


Module: light blue High-pull headgear: blue denim

745-022-00 1 piece

Neck Pad without Safety ModulesHeadgear and neck pads must always be used with safety modules.

Neck pad: blue denim

745-023-00 5 pieces

262

Neck Pad without Safety ModulesHeadgear and neck pads must always be used with safety modules.

Neck pad: blue cotton

745-033-00 5 pieces



Neck pad: pink cotton 745-034-00 5 pieces

Neck Pad without Safety Modules (padded)Headgear and neck pads must always be used with safety modules.

Neck pad: blue/red

745-038-00 5 pieces

Neck pad: red/blue 745-039-00 5 pieces

Neck pad: blue/yellow 745-041-00 5 pieces

Safety Modules with Metal ClipFor neck pads or high-pull headgear. Headgear and neck pads must always be used with safety modules.


Module: white

745-028-00 10 pieces


Module: dark blue 745-029-00 10 pieces


Module: light blue 745-030-00 10 pieces

Metal Clip for Safety ModulesMaterial: stainless steel 745-037-00 10 pieces

263

High-Pull Headgear with Chin CapOne type which is suitable for all head and chin sizes. With elastic, porous and air per-meable chin cap.Color: blue

744-705-00 1 piece



High-Pull Headgear with Chin CapOne type which is suitable for all head and chin sizes. With rigid chin cap and short outer hooks, air permeable.Color: blue

744-709-00 1 piece

Vertical-Pull Headgear with Chin CapOne type which is suitable for all head and chin sizes. With elastic, porous and air permeable chin cap.Color: blue

744-706-00 1 piece

Vertical-Pull Headgear with Chin CapOne type which is suitable for all head and chin sizes. With rigid chin cap and short outer hooks, air permeable.Color: blue

744-710-00 1 piece

High-Pull Headgear for Face BowWith eyelets for hooking extraoral plastic chains.

We recommend: Dentalastics® extraoral plastic chains, REF 744-300-00.

Available: High-pull headgear without modules and face bow.

Color: blue denim

744-711-50 1 piece

High-Pull Headgear to beused with J-HooksWith protective plastic tubes for mounting elastics. One type is suitable for all head sizes. J-Hook REF 742-501-00 for headgear see accessories.Color: blue

744-202-00 1 piece

264

Reverse-Pull Headgear “Tuebinger“ ModelMesial movement of lateral teeth in upper and lower arch. Movement of individual teeth along the arch. Movement of groups of teeth in the arch, Protraction of anterior segments (intermaxillary area). Forehead pad with band and chin cap, see accessories.

745-300-00 1 piece



Face Mask “Delaire“ ModelMesial movement of lateral teeth in upper and lower arch. Movement of individual teeth along the arch. Movement of groups of teeth in the arch, Protraction of anterior segments (intermaxillary area). Forehead pad with band and chin cap, see accessories.

745-400-00 1 piece

Headgear “Hickham“ Universal PullOffers individual adjustment of force direction. The required force is produced by extraoral elastics. All headgears fitted with cheek pads but are without hooks. J-Hooks REF 744-713-00 for Hickham Headgear see accessories.Color: blue

744-712-00 1 piece

Headgear “Hickham“ High PullOffers individual adjustment of force direction. The required force is produced by extraoral elastics. All headgears fitted with cheek pads but are without hooks.J-Hooks REF 744-713-00 for Hickham Headgear see accessories.Color: blue

744-717-00 1 piece

Noninium® Face Bow, MediumNickel free (Nickel trace elements of 0 ≤ 0,2% are due to the process of manufacturing.) Break resistant laser welded connection between outer and inner bow. Safety Note: Face bows must always be worn with safety headgear and safety modules.

Outer bow, without cuspid hooks.

Inner bow: ø 1.15 mm / 45

Safety caps: white

740-000-00 1 piece

265

Standard Face Bow, MiniBreak resistant laser welded connection between outer and inner bow. Safety Note: Face bows must always be worn with safety headgear and safety modules.



Safety caps: white

740-019-00 1 piece



Standard Face Bow, MediumBreak resistant laser welded connection between outer and inner bow. Safety Note: Face bows must always be worn with safety headgear and safety modules.



Safety caps: white

740-010-00 1 piece



Safety caps: white

740-020-00 1 piece

Outer bow, with cuspid hooks.


Safety caps: white

740-120-00 1 piece



Safety caps: white Face bow: plastic coated

740-220-00 1 piece

Standard Face Bow, MaxiBreak resistant laser welded connection between outer and inner bow. Safety Note: Face bows must always be worn with safety headgear and safety modules.



Safety caps: white

740-021-00 1 piece

266

Standard Face Bow, MaxiBreak resistant laser welded connection between outer and inner bow. Safety Note: Face bows must always be worn with safety headgear and safety modules.



Safety caps: white Face bow: plastic coated

740-221-00 1 piece



Face Bow with Stop Loops, MediumBreak resistant laser welded connection between outer and inner bow. Outer bow in medium length only. Safety Note: Face bows must always be worn with safety headgear and safety modules.


Inner bow: ø 1.15 mm / 45 Stop loops: 83 mm

Safety caps: yellow

741-040-00 1 piece



Safety caps: grey

741-045-00 1 piece



Safety caps: red

741-050-00 1 piece



Safety caps: green

741-055-00 1 piece



Safety caps: blue

741-060-00 1 piece

267

Face Bow with Stop Loops, MediumBreak resistant laser welded connection between outer and inner bow. Outer bow in medium length only. Safety Note: Face bows must always be worn with safety headgear and safety modules.



Safety caps: red

741-150-00 1 piece





Safety caps: yellow Face bow: plastic coated

741-240-00 1 piece



Safety caps: grey Face bow: plastic coated

741-245-00 1 piece



Safety caps: red Face bow: plastic coated

741-250-00 1 piece



Safety caps: green Face bow: plastic coated

741-255-00 1 piece

268


Elastic Auxiliaries

Intraoral Latex ElasticsHighest elasticity and fatigue resistance. The elastic packs are marked according to size and strength with symbols. Therefore, every type can be quickly identified.

Strength: Strength ratings are based on the elastic being stretched 3 times the listed inner diameter zur Wirkung.

Color: natural

Strength Inner diameter REF Quantity light 0.7 N (71 g) 3.2 mm / 1/8 inch 772-103-00 10 x 100 pieces light 0.7 N (71 g) 4.8 mm / 3/16 inch 772-104-00 10 x 100 pieces light 0.7 N (71 g) 6.4 mm / 1/4 inch 772-106-00 10 x 100 pieces light 0.7 N (71 g) 8.0 mm / 5/16 inch 772-107-00 10 x 100 pieces light 0.7 N (71 g) 9.5 mm / 3/8 inch 772-109-00 10 x 100 pieces medium 1.3 N (128 g) 3.2 mm / 1/8 inch 772-113-00 10 x 100 pieces medium 1.3 N (128 g) 4.8 mm / 3/16 inch 772-114-00 10 x 100 pieces medium 1.3 N (128 g) 6.4 mm / 1/4 inch 772-116-00 10 x 100 pieces medium 1.3 N (128 g) 8.0 mm / 5/16 inch 772-117-00 10 x 100 pieces medium 1.3 N (128 g) 9.5 mm / 3/8 inch 772-119-00 10 x 100 pieces strong 1.8 N (184 g) 3.2 mm / 1/8 inch 772-123-00 10 x 100 pieces strong 1.8 N (184 g) 4.8 mm / 3/16 inch 772-124-00 10 x 100 pieces strong 1.8 N (184 g) 6.4 mm / 1/4 inch 772-125-00 10 x 100 pieces strong 1.8 N (184 g) 8.0 mm / 5/16 inch 772-126-00 10 x 100 pieces strong 1.8 N (184 g) 9.5 mm / 3/8 inch 772-127-00 10 x 100 pieces

Elastic PlacersFor seating and removing intraoral rubber rings.Assorted colors in purple, magenta, yellow, green

772-400-00 50 pieces

DISCO Intraoral Colored Latex ElasticsHighest elasticity and fatigue resistance.

Strength: Strength ratings are based on the elastic being stretched 3 times the listed inner diameter.

Assorted colors in purple, red, green

Strength Inner diameter REF Quantity medium 1.3 N (128 g) 4.8 mm / 3/16 inch 772-514-00 25 x 100 pieces medium 1.3 N (128 g) 6.4 mm / 1/4 inch 772-516-00 25 x 100 pieces medium 1.3 N (128 g) 8.0 mm / 5/16 inch 772-517-00 25 x 100 pieces strong 1.8 N (184 g) 4.8 mm / 3/16 inch 772-524-00 25 x 100 pieces strong 1.8 N (184 g) 6,4 mm / 1/4 inch 772-526-00 25 x 100 pieces strong 1.8 N (184 g) 8.0 mm / 5/16 inch 772-527-00 25 x 100 pieces

269


Elastic Auxiliaries

Intraoral Non-Latex ElasticsHighest elasticity and fatigue resistance. The elastic packs are marked according to size and strength with symbols. Therefore, every type can be quickly identified.

Strength: Strength ratings are based on the elastic being stretched 3 times the listed inner diameter.

Color: transparent

Strength Inner diameter REF Quantity light 0.7 N (71 g) 3.2 mm / 1/8 inch 772-303-00 10 x 100 pieces light 0.7 N (71 g) 4.8 mm / 3/16 inch 772-304-00 10 x 100 pieces light 0.7 N (71 g) 6.4 mm / 1/4 inch 772-306-00 10 x 100 pieces light 0.7 N (71 g) 8.0 mm / 5/16 inch 772-307-00 10 x 100 pieces light 0.7 N (71 g) 9.5 mm / 3/8 inch 772-309-00 10 x 100 pieces medium 1.3 N (128 g) 3.2 mm / 1/8 inch 772-313-00 10 x 100 pieces medium 1.3 N (128 g) 4.8 mm / 3/16 inch 772-314-00 10 x 100 pieces medium 1.3 N (128 g) 6.4 mm / 1/4 inch 772-316-00 10 x 100 pieces medium 1.3 N (128 g) 8.0 mm / 5/16 inch 772-317-00 10 x 100 pieces medium 1.3 N (128 g) 9.5 mm / 3/8 inch 772-319-00 10 x 100 pieces strong 1.8 N (184 g) 3.2 mm / 1/8 inch 772-323-00 10 x 100 pieces strong 1.8 N (184 g) 4.8 mm / 3/16 inch 772-324-00 10 x 100 pieces strong 1.8 N (184 g) 6.4 mm / 1/4 inch 772-325-00 10 x 100 pieces strong 1.8 N (184 g) 8.0 mm / 5/16 inch 772-326-00 10 x 100 pieces strong 1.8 N (184 g) 9.5 mm / 3/8 inch 772-327-00 10 x 100 pieces

Container for Intraoral Elastics

For patient packs of latex elastics. With wall bracket.Dimensions: Length: 508 mm / 20 inch Height: 169 mm / 6 1/2 inch Depth: 107 mm / 4 inch

772-000-00 1 piece

Intraoral Latex ElasticsSpecial sizes. Cuspid to cuspid, for use with face bows with cuspid hooks. Highest elasticity and fatigue resistance. The indicated pull comes into force when the elastic is stretched to three times its diameter.

Strength Inner diameter REF Quantity medium 1.3 N (128 g) 16 mm / 5/8 inch 772-100-00 1,000 pieces medium 1.3 N (128 g) 19 mm / 3/4 inch 772-200-00 1,000 pieces

Extraoral Latex ElasticsHigh elasticity and fatique resistance. The indicated pull comes into force when the elastic is stretched to three times its diameter.

Strength Inner diameter REF Quantity light 2.3 N (227 g) 6.4 mm / 1/4 inch 772-203-00 1,000 pieces light 2.3 N (227 g) 8.0 mm / 5/16 inch 772-204-00 1,000 pieces light 2.3 N (227 g) 9.5 mm / 3/8 inch 772-205-00 1,000 pieces light 2.3 N (227 g) 12.7 mm / 1/2 inch 772-206-00 1,000 pieces strong 4.5 N (455 g) 8.0 mm / 5/16 inch 772-208-00 1,000 pieces strong 4.5 N (455 g) 12.7 mm / 1/2 inch 772-210-00 1,000 pieces

270

Elastic Ligature SilkSpun elastic thread. Medium strength.

775-210-00 40 m


Elastic Auxiliaries

Dentalastics® Rotation WedgesFor individual tooth rotation.Color: grey

774-003-00 100 pieces

Color: transparent 774-000-00 100 pieces

Dentalastics® Plastic LigaturesFor ligating arch wires.

For single and double-winged brackets.

Inner diameter: ø 1.3 mm

Color: transparent

774-002-01 1,000 pieces

Dentalastics® Plastic Ligature Chain Elastics, with Short ConnectorInner diameter ø 1.3 mm Length: 6.6 mm

Color: transparent

774-102-01 100 pieces

Inner diameter ø 1.3 mm Length: 7.4 mm

Color: transparent

774-112-00 100 pieces

Inner diameter ø 1.3 mm Length: 9.2 mm

Color: transparent

774-122-00 100 pieces

271

Dentalastics® SeparatorsFor quick and easy separation of teeth. Radiopaque. For anteriors.

Inner diameter ø 1.5 mm

Color: green

774-100-01 1,000 pieces


Elastic Auxiliaries

For posteriors.

Inner diameter ø 2.1 mm

Color: blue

774-200-01 1,000 pieces

"Elasto-Force" Plastic Chains, with Short ConnectorRoll 3,5 m

Color Inner diameter REF Quantity Transparent 1.3 mm 774-220-00 1 roll Green 1.3 mm 774-230-00 1 roll Pink 1.3 mm 774-231-00 1 roll Blue 1.3 mm 774-232-00 1 roll Red 1.3 mm 774-233-00 1 roll Yellow 1.3 mm 774-234-00 1 roll Metallic silver 1.3 mm 774-235-00 1 roll

Super "Elasto-Force" Plastic Chains, with Short ConnectorConstant tension with longer effectiveness. High elasticity with very good resiliency. Roll 3,5 m

Color Inner diameter REF Quantity Transparent 1,3 mm 774-217-00 1 roll

"Elasto-Force" Plastic Chains, without Short ConnectorRoll 3,5 m

Color Inner diameter REF Quantity Transparent 1.3 mm 774-221-00 1 roll Blue 1.3 mm 774-226-00 1 roll Yellow 1.3 mm 774-228-00 1 roll Metallic silver 1.3 mm 774-229-00 1 roll

Super "Elasto-Force" Plastic Chains, without Short ConnectorConstant tension with longer effectiveness. High elasticity with very good resiliency. Roll 3,5 m

Color Inner diameter REF Quantity Transparent 1.3 mm 774-216-00 1 roll

272

"Elasto-Force" Plastic Ligature Thread, hollowFor rotation, cuspid movement, figure eight ligating, etc. Easy to tie, because the thread is hollow.Outer diameter: ø 0.65 mm / 25 Length: 15 m

Color: transparent

774-205-00 1 piece


Elastic Auxiliaries

Dentalastics® "Personal" AssortmentColored Plastic Ligatures Especially delicate plastic ligatures for ligating archwires to brackets. For single and double-winged brackets.

Packet content per color: 44 sticks x 22 rings = 968 pieces.

Ring inner diameter: ø 1.3 mm

Assortment: all colors

774-561-01 1 Assortment

Dentalastics® "Personal"Colored Plastic Ligatures Especially delicate plastic ligatures for ligating archwires to brackets. For single and double-winged brackets.

Packet content: 45 sticks x 22 rings = 990 pieces.

Color Inner diameter REF Quantity Silver 1.3 mm 774-549-00 1 packet Transparent 1.3 mm 774-551-00 1 packet Black 1.3 mm 774-552-00 1 packet White 1.3 mm 774-553-00 1 packet Pink 1.3 mm 774-554-00 1 packet Blue 1.3 mm 774-555-00 1 packet Red 1.3 mm 774-556-00 1 packet Purple 1.3 mm 774-557-00 1 packet Yellow 1.3 mm 774-558-00 1 packet Green 1.3 mm 774-559-00 1 packet Orange 1.3 mm 774-560-00 1 packet

273

Oral Screen “Ulmer Model“Range of Application: Incorrect functions of the tongue (pressing of the tongue, incorrect position of the tongue), biting the lips and sucking the lips, weak muscle structure of the lips, as well as thumb sucking.Advantages: · No pressure points due to the flexible

material· More comfortable to wear· Better acceptance by the patient· Easy to monitor the performance of the

myofunctional exercisesProtective box - see accessories (expansion screws)!Mini / Size 1 = for preschool age patients

074-000-00 1 piece


Oral Screens

Maxi / Size 2 = for patients from school age to adults

074-001-00 1 piece

Face Former individualized(Berndsen/Berndsen) Material: Silopren

Color: transparent blue

074-100-00 1 piece

Face Former anatomical(Berndsen/Berndsen) Material: Silopren

Color: transparent blue

074-101-00 1 piece

274

OrthoSafe Sports Guard, AssortmentThe safe and comfortable guard for all types of sports. Protects the upper and lower arches. Consists of: · 5 x guards, colors (each - 1 x transparent,

pink, blue, green, yellow)· 5 x plastic boxes· 5 x grips



OrthoSafe Sports Guard

OrthoSafe Sports GuardThe safe and comfortable guard for all types of sports. Protects the upper and lower arches. Consists of: · 1 x guard· 1 x plastic box· 1 x gripColor: transparent

074-201-00 1 piece

Color: pink 074-202-00 1 piece

Color: blue 074-203-00 1 piece

Farbe: green 074-204-00 1 piece

Farbe: yellow 074-205-00 1 piece

275

SUS2 Starter SetContents: · 2 x telescope elements (with inbusscrew)

REF 607-147-00· 2 x telescope rods, assembled

REF 607-148-00· 2 x ball retainer clasps, ø 1.00 mm

REF 607-136-00· 2 x distance springs, length 10 mm

REF 607-142-00· 2 x compression springs (stainless steel),

length 15 mm REF 607-141-00· 1 x activation key (Inbus)

REF 607-144-00· 1 x Instructions for use

607-140-00 1 Set


SUS2 - Sabbagh Universal Spring

SUS2 SetContents: · 2 x telescope elements (with inbusscrew)

REF 607-147-00· 2 x telescope rods, assembled

REF 607-148-00· 2 x ball retainer clasps, ø 1.00 mm

REF 607-136-00· 2 x distance springs, length 10 mm

REF 607-142-00· 2 x compression springs (stainless steel),

length 15 mm REF 607-141-00· 1 x Instructions for use

607-145-00 1 Set

SUS2 Telescope rods, assembledconsisting of: · Telescope rod· Arch adapter· Fixing screw

607-148-00 2 pieces

SUS2 Telescope rods

607-149-00 2 pieces

SUS2 Arch adapter/Fixing screw

607-143-00 1 pair

SUS2 telescope elements (with inbusscrew)

607-147-00 1 piece

SUS2 compression springs (stainless steel)Length: 15 mm 607-141-00 6 pieces

276

SUS2 Compression springs (Nickel titanium)Length: 15 mm 607-150-00 6 pieces


SUS2 - Sabbagh Universal Spring

SUS2 Distance springsLänge: 10 mm 607-142-00 6 pieces

SUS2 Ball retainer claspsShaft: ø 1.00 mm Ball: ø 2.10 mm Length: 18 mm

607-136-00 10 pieces

SUS2 Activation key

607-144-00 1 piece

277

Herbst® IV Bite Jumping Hinges, completeFor soldering to bands. Ball and socket hinge for great lateral movement, with a „C“ clip to hold the rods in place. No screws required. Greater patient comfort.Contents: 1 pair of Herbst® IV Bite Jumping Hinges with 4 bases / tops and 10 „C“ clips.

607-115-00 1 Set


Herbst® Bite Jumping Hinges

“C“ ClipsFor Herbst® IV Bite Jumping Hinges. 607-116-00 10 pieces

BaseFor Herbst® IV Bite Jumping Hinges. 607-118-00 10 pieces

Telescopic Tube with Ball JointFor Herbst® IV Bite Jumping Hinges. 607-125-00 1 piece

Herbst® I Bite Jumping Hinges with Screws, completeFor soldering to bands.Contents: 1 pair of Herbst® I Bite Jumping Hinges with 4 pivots and screws / base.

607-100-00 1 Set

Pivots and ScrewsFor Herbst® I Bite Jumping Hinges. Contents: 10 screws 10 pivots

607-101-00 10 pairs

ScrewsFor Herbst® I Bite Jumping Hinges. 607-102-00 10 pieces

278

Herbst® I Bite Jumping Hinges, with Hexagon Socket Screws, completeFor soldering to bands.Contents: 1 pair of Herbst® I Bite Jumping Hinges with 4 pivots and hexagon socket screws / base, key for hexagon socket screw.

607-120-00 1 Set



Pivots and ScrewsFor Herbst® I Bite Jumping Hinges. Contents: 10 hexagon socket screws 10 pivots

607-121-30 10 pairs

Hexagon ScrewsFor Herbst® I Bite Jumping Hinges. 607-122-30 10 pieces

Key for Hexagon Socket ScrewsFor Herbst® I Bite Jumping Hinges. Size: 1.5

607-123-10 1 piece

BaseFor Herbst® I Bite Jumping Hinges. 607-117-00 10 pieces

Herbst® II Bite Jumping Hinges, completeTo fix onto arch wires with the multi band technique.Contents: 1 pair of Herbst® II Bite Jumping Hinges with 2 short screws, 2 long screws and pivots.

607-108-00 1 Set

Screws, shortFor Herbst® II Bite Jumping Hinges. 607-109-00 10 pieces

Screws, longFor Herbst® II Bite Jumping Hinges. 607-110-00 10 pieces

279

Arch Wire PivotsFor Herbst® II Bite Jumping Hinges. 607-111-00 10 pieces



Telescopic TubeFor Herbst® I + II Bite Jumping Hinges, right. 607-121-00 1 piece

Telescopic TubeFor Herbst® I + II Bite Jumping Hinges, left. 607-122-00 1 piece

Telescopic RodsFor Herbst® I + II Bite Jumping Hinges. 607-124-00 1 piece

Screw DriverFor Herbst® I + II Bite Jumping Hinges with screws.

607-106-00 1 piece

Spacer RingsFor Herbst® I through IV Bite Jumping Hinges.Length: 1 mm

607-103-00 10 pieces

Length: 2 mm 607-104-00 10 pieces




280


Herbst® TS Bite Jumping Hinges, with Hexagon Socket Screws, complete



Length: 18 mmContents:1 telescopic rod for right and left / 4 F-bases /4 hexagon socket screws / 1 key for hexa-gon socket screws / 1 instructions for use



Herbst® TS – Bite Jumping Hinges with Telescopic System

F-Base

Clamping Pliers Herbst® TS

For Herbst® TS + I Bite Jumping Hinges.

sterilizableTo clamp the crimpable spacer rings onto the telescopic rod.Premium Line – 10 year guarantee

607-126-18 1 set

607-126-20 1 set

607-126-22 1 set

607-127-30 10 pieces

003-710-00 1 piece

607-103-11 10 pieces

607-104-11 10 pieces

607-105-11 10 pieces

607-106-11 10 pieces

Herbst® TS Spacer Rings, crimpableFor Herbst® TS Bite Jumping Hinges.Length: 1 mm

Length: 2 mm

Length: 3 mm

Length: 4 mm

281


Chin CapElastic, porous, air permeable.Color: blue

744-614-00 1 piece

Accessories

Chin CapRigid, padded, with short hook, air permeable.Color: blue

744-613-00 1 piece

Chin CapRigid, padded, with long hook, air permeable.Color: blue

744-615-00 1 piece

Chin CapFor Reverse-Pull Headgear, Tuebinger Model, air permeable.Color: blue

745-304-00 1 piece

Chin Cap LinerTo make the chin cap more comfortable and prevent skin irritation.

744-616-00 10 pieces

Chin Cap Liner, DelaireForehead / Chin cap pad for face mask Delaire REF 745-400-00. Self adhesive.

745-401-00 1 piece

Headband, elastic, adjustableFor Reverse-Pull Headgear, Tuebinger Model 745-302-00 5 pieces

Forehead Pad with BandFor Reverse-Pull Headgear, Tuebinger Model 745-301-00 5 pieces

Foam Pad for HeadgearFor individually sized pads.Length: 2.70 m / 8.5 ft

Color: blue

744-100-00 1 piece

282


Neck Pads for Neck BandsAssortment of 10 piecesLength: 180 mm / 7 1/8“

Contents: 4 x red 3 x turquoise 3 x yellow


Accessories

Neck Pads for Neck BandsLength: 180 mm / 7 1/8“

Color: violet 744-101-00 10 pieces

Head Band MaterialFor individually fitted head bands.Width: 20 mm / 3/4“ Length: 22.50 m / 24.5 yds

Color: blue

744-601-00 1 piece

J-HooksWith loops for direct force application to headgear. For headgear REF 744-202-00.

742-501-00 1 pair

J-Hooks for Hickham HeadgearFor universal pull headgear REF 744-712-00 and for high-pull headgear REF 744-717-00. Complete with sliding tubes and elastics. For cuspid / bicuspid retraction.

744-713-00 2 pieces

Dentalastics® Extraoral Plastic ChainExample: Headgear with hooks.Length: 118 mm / 4 5/8“

Color: transparent

774-300-00 10 pieces

Lip BumpersWith plastic shield and hook for intermaxillary elastics.For tubes ø 0.90 mm / 36

748-009-00 1 piece

283

Lip BumpersWith plastic shield and hook for intermaxillary elastics.For tubes ø 1.15 mm / 45

748-114-00 1 piece

Accessories

Stop TubesFor face bows and lip bumpers.Inner diameter ø 1.15 mm / 45

480-914-00 100 pieces

Activator TubesThese tubes can be built directly into an activator to hold a face bow. Example: Teuscher activator.Inner diameter ø 1.15 mm / 45

607-300-00 10 pieces

Inner diameter ø 1.30 mm / 51 607-301-00 10 pieces

Stop ScrewsLadanyi For face bows and lip bumpers.Inner diameter ø 1,15 mm / 45

480-918-02 10 pieces

Key for Hexagon Socket ScrewsFor hexagonal stop screws (Ladanyi).Size: 0.9

480-924-02 1 piece

StaplerHeavy duty stapler for assembling headgear. 744-501-00 1 piece

StaplesFor stapler REF 744-501-00. 744-352-00 5.000 pieces

284

Supplies

Impression Material ......................................................................................................................... Page 288

Laboratory Accessories .................................................................................................................... Page 291

Miscellaneous ................................................................................................................................... Page 292



Brackets

Buccal Tubes

Bands

Adhesives



Supplies

Expansion Screws



Equipment


Courses

Service

SuppliesReliable and a good value

285

Supplies

286

Supplies

The universal orthodontic impression material

Orthalgenat® Duo

Very creamy consistency Outstanding definition –

optimal stability Orthalgenat® Duo has a very high proportion of fine micro

particles. This gives it a very creamy and homogenous con-sistency and enables it to reproduce outstanding definition with an even and smooth surface and optimal stability. This stability prevents the impression material from flowing over the edge of the impression tray.

High tear resistance Utilization also for patients

with brackets Orthalgenat® Duo is a quick setting impression material and

is especially resistant to tearing. Precision in all situations. Orthalgenat® Duo produces excellent results with deep undercuts and multi banded patients.

287

Supplies

Good restoration after distortion Precise impressions Orthalgenat® Duo has excellent elasticity after setting due to its cross linked structure. This is an important factor when taking

accurate impressions on multi banded patients. Once set, a 97.5% restoration value is realized (DIN/EN/ISO 21563).

Pleasant taste Highly accepted by patients Orthalgenat® Duo is available in 2 different flavors which are especially popular amongst children: Mint and vanilla.

Virtually dust free Easy and clean mixing Orthalgenat® Duo is virtually dust free and guarantees easy and clean mixing. It is suitable for both manual mixing and

automatic mixing machines.

Compatible with all conventional dental plasters and disinfectants Easy and universal use Orthalgenat® Duo is compatible with all conventional dental plasters and disinfectants. The impressions can be repeatedly

cast with plaster without compromising precision.

Optional – the separate color indicator The new Orthalgenat® Duo separate color indicator is unique and can be added individually as desired. The color

changes on the indicator depend on the original color of the impression material. It clearly shows the setting stages of the mixed Orthalgenat® Duo.

Original color:Directly after mixing, initial stages

of impression taking

Color change only in conjunction

with color indicator

Intermediate color:By the time the second change

in color is complete

Final color:End of impression taking period

As soon as this change in color is complete, Orthalgenat® Duo can be put into the mouth to take the impression, at the latest when the impression material starts to turn blue / orange (respectively).

When the change in colors is in its last phase, the Orthalgenat® Duo impression can be removed.

purple

blue

green

pink

orange

yellow

288

Orthalgenat® DuoImpression material.Flavor: Vanilla

Color: yellow

Available:1 kg in box9 and 20 x 1 kg in bag

150-501-10 1 kg

150-509-10 9 x 1 kg

150-520-10 20 x 1 kg

Supplies

Impression Material

Flavor: Mint

Color: green

Available:1 kg in box9 and 20 x 1 kg in bag

150-501-20 1 kg

150-509-20 9 x 1 kg

150-520-20 20 x 1 kg

Orthalgenat® Duo Color Indicator

150-510-00 20 ml

Dosing BottleFor liquids.Volume: 500 ml

150-000-00 1 piece

Orthalgenat®-ExImpression tray cleaner.For removing alginate and plaster residue. Concentrate for manual or ultrasonic cleaning.

150-010-00 1.5 kg

289

O-Tray Impression TraysDisposable, can be disinfected, do not sterilize. Specially developed for orthodontics. The deep vertical walls guarantee precise definition of the soft tissue and economize on impression material. Retention buttons REF 150-400-00 may be placed in the perforations to obtain additional retention.

Upper - Size: U1

Color: yellow

150-201-00 20 pieces

Supplies

Impression Material

Upper - Size: U2

Color: red 150-202-00 20 pieces

Upper - Size: U3

Color: blue 150-203-00 20 pieces

Upper - Size: U4

Color: green 150-204-00 20 pieces

Lower - Size: L1

Color: yellow 150-221-00 20 pieces

Lower - Size: L2


Lower - Size: L3

Color: blue 150-223-00 20 pieces

Lower - Size: L4

Color: green 150-224-00 20 pieces

290

Retention ButtonsFor O-Tray Impression Trays.· Retention buttons may be placed in the

perforations to obtain additional retention· They feature rounded edges for greater

patient comfort and better retention of the impression material

150-400-00 100 pieces

Supplies

Impression Material

Flexaponal®-Special Wax (Uhlig)For bite registration, adhesive borders and impression trays. Accurately records the occlusion. Soft, flexible and adhesive, 1.0 mm thick.Strips: 200 x 10 mm

Color: red

124-002-00 50 pieces

Strips: 120 x 15 mm


Strips: 200 x 10 mm

Color: white 124-202-00 50 pieces

291

Rapidur®

Extra hard, rapid setting, super white plaster of class IV for orthodontic models. According to DIN EN ISO 6873. Setting expansion: max. 0.15 % Compressive strength after 1 hour: min. 35 N/mm2 Processing time: min. 3 min Solidification time: max. 30 min

164-450-00 6 kg

Supplies

Laboratory Accessories

Mixing BowlFor plaster and impression material. Flexible, scratch resistant and easy to clean.

For 600 ml.

164-650-00 1 piece

For 400 ml. 164-651-00 1 piece

Model GlossEnvironmentally friendly impregnating liquid for (Rapidur®) plaster demonstration models to provide gloss and dust resistance.

166-450-00 4,5 kg

Orthodontic Base Unit (Hinz)For fixing three dimensionally oriented models. The uniform height, 6 cm, of the orthodontic models is determined by the base unit, which is easy to use.

050-500-00 1 piece

Plastic Model BasesMade of impact resistant white plastic, with hinge. Eliminates time consuming plaster model preparation.

Suited for Orthodontic Base Unit (Hinz).

Made of white plastic.

050-501-00 100 Paar

Bars/Ball JointsFor Plastic Model Bases REF 050-501-00. Suited for Orthodontic Base Unit (Hinz).


050-503-00 50 pieces

292

Orthodontic Model TraysEach tray will hold five sets of models. They are stackable.Dimensions: 94 x 330 x 83 mm (W x D x H)


050-502-00 10 pieces

Supplies

Laboratory Accessories

Ortho BrushA specialty orthodontic tooth brush, ideal for cleaning interproximal areas, fixed brackets and band appliances.

163-300-00 10 pieces

Miscellaneous

293

Notes

294

Expansion Screws

Standard Expansion Screws ............................................................................................................ Page 298

Special Screws .................................................................................................................................. Page 300

Accessories ....................................................................................................................................... Page 311



Brackets

Buccal Tubes

Bands

Adhesives



Supplies

Expansion Screws



Equipment


Courses

Service

A Wide Selection of ProductsPerfect to the last detail

295

Expansion Screws

296

Expansion Screws

A wide selection of products For virtually all treatment plans Dentaurum’s selection of stainless steel expansion

screws ranges from standard expansion screws to more complex special expansion screws such as Bertoni's three dimensional screws. remati-tan® expansion screws, the biocompatible alter-natives in pure titanium for sensitive patients, round off this wide selection.

Perfect to the last detail Reliable and effective

treatment results Dentaurum’s expansion screws achieve wide

expansion despite their small size. The built-in stops prevent the screws from coming apart. Precision thread friction and the built-in screw lock mechanism enables precise opening of the screw without unwanted “turning back”. Strong and stable screw construction due to high precision and excellent quality.

Perfect in form, function and finish

Expansion Screws

297

Expansion Screws

A selection of expansion screws

Titanium Hyrax® Maxi - 12 The world’s first expansion screw in pure titanium Apart from the Titanium Hyrax® 14/12 expansion screw’s perfect design it also has unbeatable biocompatibili-

ty. This is due to the fact that it is made of pure titanium which can be used for treatments with especially sensitive patients. The functional highlights of this innovative product are:

The built-in screw lock to prevent unwanted "turning back"

The built-in screw stop to prevent the screw from coming apart once maximum expansion has been obtained

Excellent thread strength which creates high stability

Variety SP The versatile, multi functional expansion screw The Variety expansion screw’s compact design is extremely comfortable for the patient to wear despite its wide

expansion of 12 mm. Its functional highlights among others are:

The biocompatible laser welded legs, which are mechanically extremely strong

2 instead of 4 retention legs, which opens a whole new range of possibilities

2 instead of 4 retention legs makes the Variety expansion screw versatile and can be used in both upper and lower appliances. An example of this would be:

Distalization and mesialization of posterior teeth

Osseous distraction in the lower jaw

Uprighting, expand, rotate and torquing of molars

Early expansion of the maxilla

Forward Thrust Double Plate System (Schaneng) The elastic system The flexible forward thrust double plate system differs from conventional systems in the elasticity of the

intermaxillary guide elements. This creates a more gentle application of force on the temporomandibular joint. Forward thrust double plates also have the advantage that apart from shifting occlusion it is also possible to move individual teeth with the aid of springs.

Other advantages include:

Guide ridge is round and smooth, causing no risk of injury to the patient

Guide ridge is flexible and interconnected, therefore, less likely to brake

Location template ensures that the guide ridge slides properly on the lingual plate at an angle of 60°

298

Expansion Screws

600-300-10 1 piece

600-300-30 10 pieces

600-300-60 100 pieces

600-301-10 1 piece

600-301-30 10 pieces

600-301-60 100 pieces

600-302-10 1 piece

600-302-30 10 pieces

600-302-60 100 pieces

rematitan®-Expansion Screw, MediumMade of pure titanium. Skeleton design For transversal expansion and distalization in upper and lower arch. Pearl-blue plastic directional arrows. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 7.5 mm 4 x 1/4 turn = 0.80 mm

600-400-10 1 piece

600-400-30 10 pieces

Standard Expansion Screws

Expansion Screw, MiniSkeleton design For transversal expansion and distalization in the lower arch or for especially narrow upper arches. White plastic directional arrows. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 6.5 mm 4 x 1/4 turn = 0.70 mm

Expansion Screw, MediumSkeleton design For transversal expansion and distalization in the upper and lower arch. Neon yellow plastic directional arrows. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 7.5 mm 4 x 1/4 turn = 0.80 mm

Expansion Screw, MaxiSkeleton design For transversal expansion in the upper arch. Neon yellow plastic directional arrows. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 7.5 mm 4 x 1/4 turn = 0.80 mm

299

Expansion Screws

600-303-10 1 piece

600-303-30 10 pieces

600-303-60 100 pieces

Expansion Screw, MagnumSkeleton design Extra strong, for transversal expansion in the upper arch and bimaxillary functional gnatho-orthopedic appliances. Neon yellow plastic directional arrows. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 11 mm 4 x 1/4 turn = 0.80 mm

Standard Expansion Screws

Trapezoidal Expansion ScrewSkeleton design For narrow maxillas and as activation screw for bimaxillary functional gnatho orthopedic appliances. Neon yellow plastic directional arrows.Maximum expansion: 7.5 mm 4 x 1/4 turn = 0.80 mm

600-310-30 10 pieces

300

Expansion Screws

600-502-10 1 piece

600-502-30 10 pieces

600-502-60 100 pieces

600-503-10 1 piece

600-503-30 10 pieces

600-503-60 100 pieces

600-500-10 1 piece

600-500-30 10 pieces

600-500-60 100 pieces

600-501-10 1 piece

600-501-30 10 pieces

600-501-60 100 pieces

600-602-30 10 pieces

Sectional Screw, MiniStraight guide pins For movement of individual teeth. Arrow indicating the opening direction.Maximum expansion: 4 mm 4 x 1/4 turn = 0.35 mm

Special Screws

Sectional Screw, MiniAngulated guide pins facing down For movement of individual teeth. Arrow indicating the opening direction.Maximum expansion: 4 mm 4 x 1/4 turn = 0.35 mm

Sectional Screw, MediumStraight guide pins Neon yellow plastic directional arrows. Holes in body of screw for better retention in acrylic. Built in stops prevent screws from coming apart.Maximum expansion: 6 mm 4 x 1/4 turn = 0.40 mm

Sectional Screw, MediumAngulated guide pins facing down Neon yellow plastic directional arrows. Guide pins angulated for better placement in acrylic. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 6 mm 4 x 1/4 turn = 0.40 mm

Retraction Screw, Extra MiniStraight U-shaped guide pins. For space closing and movement of individual teeth. Arrow indicating the opening direction.Maximum retraction: 3 mm 4 x 1/4 turn = 0.40 mm

301

Expansion Screws

Special Screws

600-601-30 10 pieces

600-600-30 10 pieces

602-606-10 1 piece

602-605-10 1 piece

602-604-10 1 piece

Retraction Screw, MiniStraight U-shaped guide pins. For space closing and movement of individual teeth. Arrow indicating the opening direction.Maximum retraction: 2.5 mm 4 x 1/4 turn = 0.40 mm

Retraction Screw, MediumStraight U-shaped guide pins. For space closing and movement of individual teeth. Arrow indicating the opening direction.Maximum retraction: 4.5 mm 4 x 1/4 turn = 0.40 mm

Three Dimensional Screw(Bertoni) Combination transversal and protrusion screw for Y-plates. Strengthened guides. Arrow indicating the opening direction.Maximum expansion: 4 mm per segment 4 x 1/4 turn = 0.35 mm

Three Dimensional Screw(Bertoni) Three independently controlled movements. Strengthened guides for Y-plates. Arrow indicating the opening direction.Maximum expansion: 4 mm per segment 4 x 1/4 turn = 0.35 mm

Three Dimensional Screw(Steiner) The separately adjustable central connector allows individual fitting to different palate shapes. Strengthened guides. Combination transversal and protrusion screw for Y-plates. Arrow indicating the opening direction.Maximum expansion: 4 mm per segment 4 x 1/4 turn = 0.35 mm

302

Expansion Screws

Special Screws

606-600-00 1 piece

606-600-30 10 pieces

606-701-00 1 piece

606-701-30 10 pieces

600-001-00 1 piece

600-001-30 10 pieces

Fan-type Expansion ScrewFor sectional expansion of maxillary ante-riors. Plate sections are opened fanwise. Arrow indicating the opening direction.Maximum expansion: 7 mm 4 x 1/4 turn = 0.80 mm

Mandibular Bow Screw(Mueller) For lateral and sagital anterior expansion of the mandible. Arrow indicating the opening direction.Maximum expansion: 5 mm 4 x 1/4 turn = 0.80 mm

"Flexible" Forward Thrust Double Plate System(Schaneng)For the treatment of distal malocclusions. The flexible forward thrust double plate system is a new development and differs from conventional systems in the flexibility of the intermaxillary elements.Starter set consisting of:· 3 x Screws with guide ridge for forward

thrust double plate REF 600-001-00· 1 x Adapter, narrow REF 600-003-00· 1 x Adapter, wide REF 600-004-00· 1 x Locating template REF 600-005-00· 1 x Instructions


"Flexible" Forward Thrust Double Plate System (Schaneng)Guide RidgeWith palatal expansion screw.Length of Guide Ridge: 14 mm

303

Expansion Screws

Special Screws

600-002-00 1 piece

600-002-30 10 pieces

600-003-00 10 pieces

600-004-00 10 pieces

600-005-00 1 piece

600-610-00 1 piece

600-610-30 10 pieces

603-000-00 1 piece

"Flexible" Forward Thrust Double Plate System (Schaneng)Guide RidgeWithout palatal expansion screw.Length of Guide Ridge: 14 mm

"Flexible" Forward Thrust Double Plate System(Schaneng) Guide Ridge Adapter

To produce the diagonal level in the lower jaw.Adapter, narrow

Width: 14 mmAdapter, wide

Width: 18 mm

Locating Template (Schaneng)Made of stainless steel The locating template supplied with the system ensures that the guide ridge slides properly on the lingual plate at a 60° angle.

Expansion Screw for Split ActivatorFor separate expansion of upper and lower arches. Arrow indicating the opening direction.Maximum expansion: 7 mm 4 x 1/4 turn = 0.80 mm

Norwegian Plate Screw(Weise) Sturdy screw for Norwegian plates and activators. Arrow indicating the opening direction.Maximum expansion: 5 mm 4 x 1/4 turn = 0.90 mm

304

Expansion Screws

Special Screws

Variety SP (small palate) Expansion ScrewScrew with straight retention legs For the fixed appliance technique. Can be widely used in the upper and lower jaw, for distalisation, mesialisation of posterior teeth, or for osseous distraction in the lower jaw.Also for early palatal expansion. · Especially suitable for very narrow jaws· Makes it possible to bend the retention

legs very close to the screw body·· Small dimensions with maximum expansion· Solder free· Break resistant retention legs and stable

guidance throughout the entire expansion· The integrated spindle friction prevents

unwanted turning back· Permanently laser marked arrow on the

body of the screw indicates the opening direction and maximum expansion

· Screw can be tied down once desired expansion has been reached

With Safety Key

Screw: 9.6 mm Maximum expansion: 12 mm 4 x 1/4 turn = 0.80 mm

602-809-10 1 piece

602-809-30 10 pieces

Variety Expansion ScrewScrew with straight retention legs For the fixed appliance technique. Can be widely used in the upper and lower jaw, for distalisation, mesialisation of posterior teeth, or for osseous distraction in the lower jaw. Also for palatal expansion. · Small dimensions with maximum expansion· Solder free· Break resistant retention legs and stable

guidance throughout the entire expansion· The integrated spindle friction prevents




With Safety Key


602-806-10 1 piece

602-806-30 10 pieces

305

Expansion Screws

Special Screws

Titanium Hyrax® Maxi - 12Special Expansion Screw with straight retention legs made of pure titanium New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. Can be laser welded with titanium framework or Titanium Direct Bond Pads REF 799-210-00.With Safety Key


602-824-10 1 piece

602-824-30 10 pieces

Hyrax® Mini - 7Special Expansion Screw with straight retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from

coming apart once maximum expansion has been obtained

· Small dimensions with maximum expansion· Solder free· Break resistant retention legs, stable

guidance throughout complete expansion· The integrated spindle friction prevents




With Safety Key


602-816-10 1 piece

602-816-30 10 pieces

Titanium Direct Bond PadsAnatomically contoured. The titanium bonding bases are laser structured for the direct bond technique, specifically for the direct bonding of RPE appliances in conjunction with the Titanium Hyrax® Titanium Maxi - 12.

799-210-00 10 pieces

306

Expansion Screws

Special Screws

Hyrax® Mini - 7Special Expansion Screw with bent retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from







With Safety Key


602-817-10 1 piece

602-817-30 10 pieces

Hyrax® Mini - 12Special Expansion Screw with straight retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from







With Safety Key


602-820-10 1 piece

602-820-30 10 pieces

307

Expansion Screws

Special Screws

Hyrax® Mini - 12Special Expansion Screw with bent retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from







With Safety Key


602-821-10 1 piece

602-821-30 10 pieces

Hyrax® Medium - 10Special Expansion Screw with straight retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from







With Safety Key


602-818-10 1 piece

602-818-30 10 pieces

308

Expansion Screws

Special Screws

Hyrax® Maxi - 12Special Expansion Screw with straight retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from







With Safety Key


602-822-10 1 piece

602-822-30 10 pieces

Hyrax® Maxi - 12Special Expansion Screw with bent retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from







With Safety Key


602-823-10 1 piece

602-823-30 10 pieces

309

Expansion Screws

Special Screws


609-004-00 10 pieces

609-006-00 10 pieces

609-008-00 10 pieces

Piston Spring Screws, AssortmentComplete assortment of piston spring screws and accessories. Piston spring screws for the movement of individual teeth. These screws exert a con-stant, elastic and easily controllable pressure on the tooth to be moved. The compact size allows them to be easily built into appliances. Treatment is started with the 4 mm screw, which is exchanged for the 6 mm screw and finally the 8 mm screw as the tooth in question is moved.Contents:· 10 x Piston spring screws, length 4 mm

REF 609-004-00· 10 x Piston spring screws, length 6 mm

REF 609-006-00· 10 x Piston spring screws, length 8 mm

REF 609-008-00· 10 x Positioning screws

REF 609-100-00· 10 x Serrated housing nuts

REF 609-200-30· 1 x Reamer REF 609-300-00· 1 x Screw driver REF 609-400-00· 1 x Instructions4 x 1/4 turn = 0.35 mm

Piston Spring ScrewsFor the movement of individual teeth. These screws exert a constant, elastic and easily controllable pressure on the tooth to be moved. Their compact size allows them to be easily built into appliances.4 x 1/4 turn = 0.35 mm Length: 4 mm

4 x 1/4 turn = 0.35 mm Length: 6 mm

4 x 1/4 turn = 0.35 mm Length: 8 mm

310

Expansion Screws

Accessories

Positioning ScrewFor piston spring screws. To position the piston spring screw into the acrylic.Length: 12 mm

609-100-00 10 pieces

Serrated Housing NutFor piston spring screws. To position into acrylic or to weld onto wire elements.Length: 3 mm

609-200-30 10 pieces

ReamerFor piston spring screws. 609-300-00 1 piece

Screw DriverFor piston spring screws. To activate the piston spring screw.

609-400-00 1 piece

311

Expansion Screws

Accessories

Arrows to Indicate the Opening DirectionFor Expansion Screws.Color: yellow

611-130-00 50 pieces

Color: white 611-131-00 50 pieces

Color: pearl-blue 611-132-00 50 pieces

Universal Bending KeyEasy bending of the retention legs of all Hyrax®, Variety and Titanium Hyrax® screws without the use of any additional pliers (leverage principle).

611-122-00 1 piece

Safety KeyCan be used with all Dentaurum Hyrax® and Variety screws. For safe activation of the expansion screws by the patient in Hyrax® and Variety fixed appliances.

611-120-01 10 pieces

Expansion Screw KeyStraight, small, standard Can be used with all Dentaurum expansion screws. Stainless steel-rustfree. To activate all expansion screws in removable appliances. Outside of the mouth.

611-115-00 1 piece

611-115-30 10 pieces

611-115-60 100 pieces

Expansion Screw KeyLarge, with elongated handle Can be used with all Dentaurum expansion screws. Stainless steel-rustfree. To activate all expansion screws in removable appliances. Outside of the mouth.

611-116-00 1 piece

Wedge RulerCan be sterilized For checking the opening of appliances.

043-720-00 1 piece

312

Expansion Screws

Accessories

Expansion Screw Sample KitFilled with 29 expansion screws that are cur-rently available, plus 3 expansion screw keys. 1 Set = 32 pieces

612-000-00 1 Set

Appliance Container, MiniThe mini version is especially suitable for single appliances and oral screens, such as the Ulmer Model. Made of durable plastic.Color: pearl-blue

163-602-01 10 pieces

Color: neon-pink 163-603-01 10 pieces

Color: neon-yellow 163-604-01 10 pieces

Color: neon-orange 163-605-01 10 pieces

Color: neon-green 163-606-01 10 pieces

313

Expansion Screws

Accessories

Appliance Container, MaxiThe maxi version is especially suitable for bimaxillary appliances, such as activator, bionator. Made of durable plastic.Color: pearl-blue

163-702-01 10 pieces

Color: neon-pink 163-703-01 10 pieces

Color: neon-yellow 163-704-01 10 pieces

Color: neon-orange 163-705-01 10 pieces

Color: neon-green 163-706-01 10 pieces

Color: black 163-707-01 10 pieces

Color: white-flecked 163-708-01 10 pieces

314

Appliance Container, MagnumThe magnum version is especially suitable for extremely large Fraenkel appliances, orthodontic appliances for adult treatment, or dentures. Made of durable plastic.Color: pearl-blue

163-802-01 10 pieces

Expansion Screws

Accessories

Lanyard with Safety ClipsFor appliance containers.Colors: blue, neon rose, neon yellow, neon orange, neon green, printed with ”Dentaurum“, mixed

163-807-00 25 pieces

Appliance Container „Football“Made of durable plastic.Universal size for removable upper appliances, bimaxillary appliances and function regulators.Color: black-white

163-805-01 10 pieces

Appliance Container „Stardust“Made of durable plastic.Universal size for removable upper appliances, bimaxillary appliances and function regulators.Color: blue (with silver-colored Dentaurum-Logo)

163-806-01 10 pieces

315

Notes

Intra- and Extraoral - MEDIPRO | Medipro … Intra- and Extraoral For every treatment technique...

Documents

Transcript of Intra- and Extraoral - MEDIPRO | Medipro … Intra- and Extraoral For every treatment technique...