INTERNATIONAL JOURNAL OFAssessment of Post Ergonomic Effects of Lifting Tasks Performed in Block...
Transcript of INTERNATIONAL JOURNAL OFAssessment of Post Ergonomic Effects of Lifting Tasks Performed in Block...
INTERNATIONAL JOURNAL OF
ERGONOMICS (IJEG)
VOLUME 3, ISSUE 2, 2013
EDITED BY
DR. NABEEL TAHIR
ISSN (Online): 1985-2312
International Journal of Ergonomics is published both in traditional paper form and in Internet.
This journal is published at the website http://www.cscjournals.org, maintained by Computer
Science Journals (CSC Journals), Malaysia.
IJEG Journal is a part of CSC Publishers
Computer Science Journals
http://www.cscjournals.org
INTERNATIONAL JOURNAL OF ERGONOMICS (IJEG)
Book: Volume 3, Issue 2, June 2013
Publishing Date: 30-06-2013
ISSN (Online): 1985-2312
This work is subjected to copyright. All rights are reserved whether the whole or
part of the material is concerned, specifically the rights of translation, reprinting,
re-use of illusions, recitation, broadcasting, reproduction on microfilms or in any
other way, and storage in data banks. Duplication of this publication of parts
thereof is permitted only under the provision of the copyright law 1965, in its
current version, and permission of use must always be obtained from CSC
Publishers.
IJEG Journal is a part of CSC Publishers
http://www.cscjournals.org
© IJEG Journal
Published in Malaysia
Typesetting: Camera-ready by author, data conversation by CSC Publishing Services – CSC Journals,
Malaysia
CSC Publishers, 2013
EDITORIAL PREFACE
This is the Second Issue of Volume Three of International Journal of Ergonomics (IJEG). The Journal is published bi-monthly, with papers being peer reviewed to high international standards. The International Journal of Ergonomics is not limited to a specific aspect of Ergonomics but it is devoted to the publication of high quality papers on all division of engineering in general. IJEG intends to disseminate knowledge in the various disciplines of the Computer Science field from theoretical, practical and analytical research to physical implications and theoretical or quantitative discussion intended for academic and industrial progress. In order to position IJEG as one of the good journal on Computer Sciences, a group of highly valuable scholars are serving on the editorial board. The International Editorial Board ensures that significant developments in Ergonomics from around the world are reflected in the Journal. Some important topics covers by journal are architectures, middleware, tools designs, Experiments, Evaluation, etc. The initial efforts helped to shape the editorial policy and to sharpen the focus of the journal. Started with Volume 3, 2013, IJEG appears with more focused issues. Besides normal publications, IJEG intend to organized special issues on more focused topics. Each special issue will have a designated editor (editors) – either member of the editorial board or another recognized specialist in the respective field. The coverage of the journal includes all new theoretical and experimental findings in the fields of engineering which enhance the knowledge of scientist, industrials, researchers and all those persons who are coupled with engineering field. IJEG objective is to publish articles that are not only technically proficient but also contains information and ideas of fresh interest for International readership. IJEG aims to handle submissions courteously and promptly. IJEG objectives are to promote and extend the use of all methods in the principal disciplines of Computing. IJEG editors understand that how much it is important for authors and researchers to have their work published with a minimum delay after submission of their papers. They also strongly believe that the direct communication between the editors and authors are important for the welfare, quality and wellbeing of the Journal and its readers. Therefore, all activities from paper submission to paper publication are controlled through electronic systems that include electronic submission, editorial panel and review system that ensures rapid decision with least delays in the publication processes. To build its international reputation, we are disseminating the publication information through Google Books, Google Scholar, Directory of Open Access Journals (DOAJ), Open J Gate, ScientificCommons, Docstoc and many more. Our International Editors are working on establishing ISI listing and a good impact factor for IJEG. We would like to remind you that the success of our journal depends directly on the number of quality articles submitted for review. Accordingly, we would like to request your participation by submitting quality manuscripts for review and encouraging your colleagues to submit quality manuscripts for review. One of the great benefits we can provide to our prospective authors is the mentoring nature of our review process. IJEG provides authors with high quality, helpful reviews that are shaped to assist authors in improving their manuscripts. Editorial Board Members International Journal of Ergonomics
EDITORIAL BOARD
ASSOCIATE EDITOR IN CHIEF (AEiCs)
Assistant Professor Isabel L. Nunes Universidade Nova de Lisboa Portugal EDITORIAL BOARD MEMBERS (EBMs)
Assistant Professor Calvin Kalun Or The University of Hong Kong Hong Kong Associate Professor Pedro Arezes University of Minho Portugal
International Journal of Ergonomics (IJEG), Volume (3), Issue (2) : 2013
TABLE OF CONTENTS
Volume 3, Issue 2, June 2013
Pages 33 - 41 Assessment of Post Ergonomic Effects of Lifting Tasks Performed in Block Moulding
Industries in Akure, Nigeria
Ayodeji, Sesan Peter & Idada, Osayi Richard
Assessment of Post Ergonomic Effects of Lifting Tasks Performed in Block Moulding Industries in Akure, Nigeria
Ayodeji, Sesan Peter [email protected]
Department of Mechanical Engineering, The Federal University of Technology, Akure, 340252, Nigeria.
Idada, Osayi Richard [email protected]
Department of Mechanical Engineering, University of Benin, Benin City, 300213, Nigeria.
Abstract
Keywords:
1. INTRODUCTION
1.1 Ergonomic Standards for Lifting Tasks
TABLE 1:
1.2 An Overview of Block Moulding in Akure, Nigeria
2. METHODOLOGY
FIGURE 1
Frequency of lift: ……….lifts /minute Weight of material lifted:
ITEM DISCRIPTION
TABLE 2:
3. RESULTS AND DISCUSSIONS
Rate
of
bo
dy d
isco
mfo
rt
FIGURE 2:
FIGURE 3:
PARAMETER MEAN VARIANCE S.D 5TH
PERCENTILE
95TH
PERCENTILE
TABLE 3:
INSTRUCTIONS TO CONTRIBUTORS The International Journal of Ergonomics (IJEG) is devoted in assimilating publications that document development and research results within the broad spectrum of subfields in the engineering sciences. The journal intends to disseminate knowledge in the various disciplines of the Ergonomics field from theoretical, practical and analytical research to physical implications and theoretical or quantitative discussion intended for both academic and industrial progress. Our intended audiences comprises of scientists, researchers, mathematicians, practicing engineers, among others working in Engineering and welcome them to exchange and share their expertise in their particular disciplines. We also encourage articles, interdisciplinary in nature. The realm of International Journal of Ergonomics (IJEG) extends, but not limited, to the following: To build its International reputation, we are disseminating the publication information through Google Books, Google Scholar, Directory of Open Access Journals (DOAJ), Open J Gate, ScientificCommons, Docstoc and many more. Our International Editors are working on establishing ISI listing and a good impact factor for IJEG. The initial efforts helped to shape the editorial policy and to sharpen the focus of the journal. Starting with volume 3, 2013, IJEG aims to appear with more focused issues. Besides normal publications, IJEG intend to organized special issues on more focused topics. Each special issue will have a designated editor (editors) – either member of the editorial board or another recognized specialist in the respective field. We are open to contributions, proposals for any topic as well as for editors and reviewers. We understand that it is through the effort of volunteers that CSC Journals continues to grow and flourish.
IJE LIST OF TOPICS The realm of International Journal of Ubiquitous Computing (IJEG) extends, but not limited, to the following:
• Aerospace Engineering • Engineering Science
• Biomedical Engineering • Electronic Engineering
• Control Systems Engineering • Computer Engineering
• Electrical Engineering • Robotics & Automation Engineering
CALL FOR PAPERS Volume: 4- Issue: 2 i. Submission Deadline : November 30, 2013 ii. Author Notification: December 25, 2013
iii. Issue Publication: December 2013
CONTACT INFORMATION
Computer Science Journals Sdn BhD
B-5-8 Plaza Mont Kiara, Mont Kiara 50480, Kuala Lumpur, MALAYSIA
Phone: 006 03 6207 1607 006 03 2782 6991
Fax: 006 03 6207 1697
Email: [email protected]