Interlocking ESD Floor Tiles - bondline.co.uk · an entrance mat. Leave a minimum of a 5mm gap...
3
Technical Datasheet www.bondline.co.uk | Tel +44 (0) 1793 511000 | [email protected] Interlocking ESD Floor Tiles www.bondline.co.uk | Tel +44 (0) 1793 511000 | [email protected] Light Grey & Dark Grey ESD Logo Tile Description These electrostatic dissipative, interlocking ESD floor tiles are ideal for both commercial and industrial use; including, production plants, electronics and telecommunication factories, offices, data centers, healthcare environments, clean rooms and computer server rooms. The tiles are a tough, flexible and modern flooring solution. They create a safe conductive floor surface that can be used as your primary ground and offer a life-time guarantee that will help it retain its ESD performance. Features Very quick and easy to install - no adhesive required. Exceptional durability - Resistant to impact, vibration and abrasion. Anti-slip properties. Environmentally friendly - 100% recyclable and zero VOC emissions. Manufactured using an injection- moulding process during which thousands of tiny stainless steel fibres are added to the compound. Good chemical resistance - Resists most chemicals and fluids. Reduces fatigue. All our ESD Floor installations can be quoted as a package tailor made to your ESD needs. Standards BS EN 61340-5-1 and IEC 61340 compliant. Manufactured in the UK with ISO 9001 Accreditation. - Offices - Cleanrooms - Server Rooms - Electronic Factories - Healthcare Environments - Data Centers
Transcript of Interlocking ESD Floor Tiles - bondline.co.uk · an entrance mat. Leave a minimum of a 5mm gap...
Technical Datasheet www.bondline.co.uk | Tel +44 (0) 1793 511000 | [email protected]
Interlocking ESD Floor Tiles
www.bondline.co.uk | Tel +44 (0) 1793 511000 | [email protected]
Light Grey & Dark GreyESD Logo Tile
DescriptionThese electrostatic dissipative, interlockingESD floor tiles are ideal for both commercialand industrial use; including, productionplants, electronics and telecommunicationfactories, offices, data centers, healthcareenvironments, clean rooms and computerserver rooms. The tiles are a tough, flexibleand modern flooring solution. They create asafe conductive floor surface that can beused as your primary ground and offer alife-time guarantee that will help it retain itsESD performance.
FeaturesVery quick and easy to install - noadhesive required.Exceptional durability - Resistant toimpact, vibration and abrasion.Anti-slip properties.Environmentally friendly - 100% recyclableand zero VOC emissions.Manufactured using an injection-moulding process during which thousandsof tiny stainless steel fibres are added tothe compound.Good chemical resistance - Resists mostchemicals and fluids.Reduces fatigue.
All our ESD Floor installations can be quotedas a package tailor made to your ESD needs.
StandardsBS EN 61340-5-1 and IEC 61340 compliant.Manufactured in the UK with ISO 9001Accreditation.
- Offices- Cleanrooms- Server Rooms
- Electronic Factories- Healthcare Environments- Data Centers
Performance & Test Results
www.bondline.co.uk | Tel +44 (0) 1793 511000 | [email protected]
Technical Datasheet www.bondline.co.uk | Tel +44 (0) 1793 511000 | [email protected]
Interlocking ESD Floor Tiles
Surface Resistivity: 2.2 x 10⁴Ω to 3 x 10⁶ΩResistance to ground: 2.9 x 10⁴Ω to 5.7 x 10⁵Ω Walking Test: <100VStatic Decay at 15% humidity: 0.01sec
'Interlocking ESD Floor Tile' has been independentlytested.
5mm 7mmDimensions:
Thickness:
Weight:
Guarantee:
500mm x 500mm 500mm x 500mm
6.8mm +/- 0.3mm
8.86kgs/m²
10 Years
4.5mm +/- 0.3mm
5.44kgs/m²
10 Years
Anticipated Service Life:
Material:
Joint:
25 Years +
PVC
Dovetail
25 Years +
PVC
Dovetail
InstallationThe principal benefit of this system is the speed and easeof installation. The tiles can be laid over any hard surfaceeven if it is damp, uneven or contaminated. Installationcan usually be fitted around your normal workingactivities ensuring minimal disruption to production.
CleaningFailure to maintain interlocking ESD floor tiles inaccordance with recommended procedure can affect theperformance of the product. We recommend cleaningthe tiles with our Killstat ESD Floor Cleaner.
Clean the tiles regularly and lightly.Use the correct cleaning equipment, either a twocomponent bucket and mop system or rotaryscrubber dryer, it may cost a bit more up front but willsave you a fortune in time and effort in the long run.To remove as much dirt and moisture as possible, usean entrance mat.
Leave a minimum of a 5mm gap between thetiles and any fixed point (walls and machinery).Leave a minimum of a 5mm gap between thetiles and any fixed point (walls and machinery).Undercut wood doorjambs and slip the tilesunderneath. With metal doorjambs – cut theflooring material to within 5mm & then caulkaround the jamb.To keep your floor looking good give it a sweepon a regular basis and use a rotary scrubberdryer for routine maintenance.
Maintaining & Finishing
www.bondline.co.uk | Tel +44 (0) 1793 511000 | [email protected]
Technical Datasheet www.bondline.co.uk | Tel +44 (0) 1793 511000 | [email protected]
Interlocking ESD Floor Tiles
Smooth
Slip Resistance:
Fire Performance:
Stain Resistance:
Abrasion Wear Resistance:
EN 14041:2004 DIN 51130:2004
PassR10
GoodEN 423
EN 13845 EN 649
Mechanical Resistance:
Resistance to Hot Objects/Solder:
Thickness of Wear Layer:
DIN 53516
EN 429
17N/mm²
Good
6 to 10mm
BS 476: Part 7 DIN 13501: 2004
Class 1 Spread of Flame Bfl-S1Does not support combustion
50K CyclesGroup T
Noise Reduction:
Hardness: ISO 868 89-92 Shore A
Impact Resistance:
Thermal Insulation
EN 13329-549 549kg/cm²
EN 140-8 >46db
1.1 m²K/W
Determination of Length,Squareness & Straightness
EN 50105-BO21 5Colour Fastness
Chemical Resistance
BS EN 428:1993 <0.13% / 0.5mm max.
Good resistance to mostcommonly used chemicals.
Common acid oils & gas oil - Nodeterioration / Not Resistant to
prolonged contact
EN 13529
Important Notice: The information contained within this spec sheet isfor guidance only. We make no warranties expressed or implied andassume no liability regarding any use of this information. InterlockingESD Floor Tiles, January 29th 2020.
The maximum test voltage allowed for measuring ESD flooring that should beused for an ESD program complying with these standards is 100 volts.
