Interior & Exterior - Pierlite · 2015. 5. 3. · Interior Range HD109TC HD109/SQ/TC HD110TC...

www.homedownlights.co.nz

QUALITY INTEGRITY REASSURANCE

Interior & ExteriorLuminaire Range

ONE HOME, ONE CHOICE

www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.2

Downlight Classifications & Marking Labels

CA 135°C

ABUTTED ONLY

Closed & Abutted - CA ratings

CA 80°C

ABUTTED ONLY

Maximum temperature allowed on any part of the downlight that comes into contact with insulation is 80ºC.

Insulation must be abutted to the sides of the fixture.

20W max. CFL.

Blanket insulation may abut and cover these downlights.

Maximum temperature of 80ºC applies.

IC-F downlights are designed to have openings no bigger than 1mm.

No maximum temperature applies to insulation.

A fire rated downlight means that it has been tested to maintain a barrier between the room and ceiling space during a fire for 30/90 minutes.

IC- Insulation Contact i.e. can be covered

Maximum temperature allowed on any part of the downlight that comes into contact with insulation is 135ºC.

Insulation must be abutted to the sides of the fixture.

100W max. GLS.

Interior RangeHD109TCHD109/SQ/TCHD110TCHD110/SQ/TCHD122HD60Eclipse SmartLED Dimmer

LED RangeHL12-NFHL12-WFHL94LED-ICHL122LED-ICFHL109LED-ICFHL109LED/EXTPhoenix HL88F-IC Fire RatedHL-LED-LEAD Kameleon “Uni-Fit” Range

Exterior RangeArch Down HE2291BLK

Arch Up/Down HE2292BLK

Tablet Down HE2162BLK

Tablet Up/Down HE2161BLK

Linear Round HE1003SBLKRD

Hourglass Round HE1002SBLKRD

Linear Square HE1013SBLKSQ

Hourglass Square HE1012SBLKSQ

Brick Up/Down HE2041BLK “The Giants” IP66 LED Range

456 7 8 911

12 13 14 15 16 17181920-21

22 23 24 25 26 27 28 29 30 31

Paintable Ceiling Ring

Easily Removable

Double Insulated Dimmable

L E D L I G H T I N G


3

Symbol Guide:


HD 109 - 100W GLS-120° -150° -180° 150° 120°

-90°

-60°

-30°

90°

60°

30°

cd/1000lm 0°Beam Angle 118° L.O.R: 75.0%

200

400

(m)

1

2

3

4

5

dia.(m)

3.33

6.66

9.99

13.32

Actual lux

237

58

26

15

2m 1m 0 1m 2m

118°

Reflectance Room Index C W F 0.75 1.0 1.25 1.50 2.0 2.5 3.0 4.0 5.070 50 20 #N/A #N/A .64 .67 .72 .75 .77 .79 .81 30 #N/A #N/A .60 .63 .68 .72 .74 .77 .79 10 #N/A #N/A .57 .60 .66 .69 .72 .75 .7750 50 20 #N/A #N/A .63 .65 .70 .72 .74 .76 .78 30 #N/A #N/A .59 .62 .67 .70 .72 .74 .76 10 #N/A #N/A .56 .59 .64 .68 .70 .73 .7530 50 20 #N/A #N/A .61 .64 .68 .70 .72 .74 .75 30 #N/A #N/A .58 .61 .65 .68 .70 .72 .74 10 #N/A #N/A .55 .59 .63 .66 .68 .71 .720 0 0 #N/A #N/A .54 .56 .61 .63 .65 .68 68

HD109TC One of NZ’s largest-selling downlights

100mm dia. hole cut out

137m

m

120mm dia. overall

OPTIONS

HD109TCPolished Silver

Reflector

HD109TC/03Satin Silver Reflector

HD10

9TC

CA 135°C

ABUTTED ONLY

HD109/13/TCPolished Chrome

Ceiling Plate

HD109TCWhite Round

Bezel (standard)

HD109/14/TCBrushed Chrome

Ceiling Plate

HD109/55/TCSilver painted

Bezel

DO NOT COVER

RoHS compliant

• Designed for 100W GLS/T2, CFL-I/70W Eco Halogen or LED Retrofit• 100mm dia. hole cut out • Complete with Thermal Cut-out control• Complies with AS/NZS60598.2.2:2001 Amendment A• CA135 classification• IP20• Weight: 330gms• Ceramic Vossloh-Schwabe E27 lampholder• Paintable round white ceiling bezel• For indoor use only NB: White Ceiling Bezel and Polished Silver Reflector fitted as standard.

5

0.5mD Minimum distance to flammable object.


OPTIONS


137m

m

120 x 120mm square

HD109/SQ/TCWhite Square

Bezel (standard)

HD109/SQ/13/TCPolished Chrome

Ceiling Plate

HD109/SQ/14/TCBrushed Chrome

Ceiling Plate

HD109/SQ/55/TCSilver painted

Bezel

HD 109 - 100W GLS-120° -150° -180° 150° 120°

-90°

-60°

-30°

90°

60°

30°


200

400

(m)

1

2

3

4

5

dia.(m)

3.33

6.66

9.99

13.32

Actual lux

237

58

26

15

2m 1m 0 1m 2m

118°

Reflectance Room Index C W F 0.75 1.0 1.25 1.50 2.0 2.5 3.0 4.0 5.070 50 20 #N/A #N/A .64 .67 .72 .75 .77 .79 .81 30 #N/A #N/A .60 .63 .68 .72 .74 .77 .79 10 #N/A #N/A .57 .60 .66 .69 .72 .75 .7750 50 20 #N/A #N/A .63 .65 .70 .72 .74 .76 .78 30 #N/A #N/A .59 .62 .67 .70 .72 .74 .76 10 #N/A #N/A .56 .59 .64 .68 .70 .73 .7530 50 20 #N/A #N/A .61 .64 .68 .70 .72 .74 .75 30 #N/A #N/A .58 .61 .65 .68 .70 .72 .74 10 #N/A #N/A .55 .59 .63 .66 .68 .71 .720 0 0 #N/A #N/A .54 .56 .61 .63 .65 .68 68

HD109/SQ/TCPolished Silver

Reflector

HD109/SQ/03/TCSatin Silver Reflector

HD10

9/SQ

/TC


DO NOT COVER

RoHS compliant

HD109/SQ/TC Popular HD109 downlight with square ceiling bezel

CA 135°C

ABUTTED ONLY

• Designed for 100W GLS/T2, CFL-I/70W Eco Halogen or LED Retrofit • 100mm dia. hole cut out• Complete with Thermal Cut-out control• Complies with AS/NZS60598.2.2:2001 Amendment A• CA135 classification• IP20• Weight: 382gms• Ceramic Vossloh-Schwabe E27 lampholder• Paintable square white ceiling bezel• For indoor use only NB: White Ceiling Bezel and Polished Silver Reflector fitted as standard.

5


166m

m


HD 110 - 20W CFL-I Spiral T3

(m)

1

2

3

4

5

dia.(m)

2.51

5.02

7.53

10.04

Actual lux

228

57

25

14

2m 1m 0 1m 2m

103°

-120° -150° -180° 150° 120°

-90°

-60°

-30°

90°

60°

30°


100

200

120mm dia. overall

HD11

0/TC

CA 80°C

ABUTTED ONLY

HD110TCWhite Round

Bezel (standard)

HD110/14/TC Brushed Chrome

Ceiling Plate

HD110/55/TCSilver painted

Bezel

HD110/13/TCPolished Chrome

Ceiling Plate

OPTIONS

DO NOT COVER

RoHS compliant

• Designed specifically for CFL-I lamps. Not suitable for GLS lamps• 100mm dia. hole cut out• Complete with Thermal Cut-out control• Complies with AS/NZS60598.2.2:2001 Amendment A• CA80 classification• IP20• Weight: 394gms• Ceramic Vossloh-Schwabe E27 lampholder• Paintable round white ceiling bezel• For indoor use only NB: White Ceiling Bezel and Satin Silver Reflector fitted as standard.

HD110/TC Designed specifically for CFL-I lamps


5


HD110/SQ/TC Designed specifically for CFL-I lamp with square ceiling bezel

166m

m


120 x 120mm ceiling bezel

HD 110 - 20W CFL-I Spiral T3

(m)

1

2

3

4

5

dia.(m)

2.51

5.02

7.53

10.04

Actual lux

228

57

25

14

2m 1m 0 1m 2m

103°

-120° -150° -180° 150° 120°

-90°

-60°

-30°

90°

60°

30°


100

200

HD11

0/SQ

/TC

HD110/SQ/13/TCPolished Chrome

Ceiling Plate

HD110/SQ/14/TCBrushed Chrome

Ceiling Plate

HD110/SQ/55/TCSilver painted

Bezel

HD110/SQ/TCWhite Square Bezel

(standard)

OPTIONS

DO NOT COVER

CA 80°C

ABUTTED ONLY

RoHS compliant5

• Designed specifically for CFL-I lamps. Not suitable for GLS lamps• 100mm dia. hole cut out• Complete with Thermal Cut-out control• Complies with AS/NZS60598.2.2:2001 Amendment A• CA80 classification• IP20• Weight: 394gms• Ceramic Vossloh-Schwabe E27 lampholder• Paintable round white ceiling bezel• For indoor use only NB: White Ceiling Bezel and Satin Silver Reflector fitted as standard.



HD122/02 /TC(Polished reflector)

HD122/03/TC(Satin reflector)

HD122/02/TCPolished Silver

Reflector

HD122/03/TC Satin Silver Reflector

(m)

1

2

3

4

5

dia.(m)

2.00

4.00

6.00

8.00

Actual lux

487

121

54

30

2m 1m 0 1m 2m

90°

Reflectance Room Index C W F 0.75 1.0 1.25 1.50 2.0 2.5 3.0 4.0 5.0 70 50 20 .49 .55 .58 .61 .64 .66 .68 .70 .71 30 .45 .51 .55 .58 .62 .64 .66 .68 .69 10 .42 .48 .52 .55 .59 .62 .64 .66 .68 50 50 20 .48 .53 .57 .59 .62 .64 .66 .67 .68 30 .45 .50 .54 .57 .60 .62 .64 .66 .67 10 .42 .48 .52 .55 .58 .61 .62 .65 .66 30 50 20 .47 .52 .56 .58 .61 .62 .63 .65 .66 30 .44 .50 .53 .56 .59 .61 .62 .64 .65 10 .42 .48 .51 .54 .57 .59 .61 .63 .64 0 0 0 .41 .46 .50 .52 .55 .57 .58 .60 .61

HD 122 - 100W GLS-120° -150° -180° 150° 120°

-90°

-60°

-30°

90°

60°

30°


250

500


160m

m

144mm dia. ceiling ring

OPT/13Polished Chrome

Ceiling Ring

OPT/14Brushed Chrome

Ceiling Ring

OPT/55Silver Painted Ceiling Ring

A2-CL IP54 Convex Clear Lens

/01 White trim/55 Silver trim

A2-FT IP54 Convex Frosted Lens

/01 White trim/55 Silver trim

CFL-I 18W max. lamp only

A5 IP20Halo Glass

OPT/SQ/13Polished Chrome

Ceiling Plate

OPT/SQ/14Brushed Chrome

Ceiling Plate

ACCESSORIES Order separately from downlight

OPTIONS Order separately from downlight

DO NOT COVER

CA 135°C

ABUTTED ONLY

RoHS compliant5


• 125mm dia. hole cut out• Complete with Thermal Cut-out control• Complies with AS/NZS60598.2.2:2001 Amendment A• CA135 classification• IP20• Weight: 380gms• Ceramic Vossloh-Schwabe E27 lampholder• For indoor use only• Paintable round white ceiling bezel

HD12

2/TC


HD60TC IC rated downlight with white round ceiling bezel

HD60/RD/13Polished Chrome

Ceiling Plate Round

HD60TCWhite Round Ceiling Ring (standard)

HD60

TC


100m

m

144mm dia. overall

OPTIONS Order separately from downlight

A2-60-FT IP54Frosted Flush Lens

A2-60-CL IP54Clear Flush Lens

HD60/SQ/13Polished Chrome

Ceiling Plate Square

OPT/14Brushed Chrome

Ceiling Ring

OPT/SQ/14Brushed Chrome

Ceiling Plate

RoHS compliant

• 125mm dia. hole cut out• Thermal Cut-Out control• Complies with AS/NZS60598.2.2001 Amendment A• IC classification• IP20• Weight: 330gms• Ceramic Vossloh-Schwabe E27 lampholder• Paintable white ceiling ring NB: White Ceiling Ring and Satin Silver Reflector fitted as standard.

5


Importance of Insulation Guards on IC and IC-F Rated Downlights

Ever wondered why some LED downlights have insulation guards fitted and others haven’t?

There is a very good reason reputable LED downlight manufacturers go to all the trouble and expense of designing and fitting insulation guards – to make sure the LED downlights will go the distance.

These guards are designed to keep thermal insulation from touching the heat sinks. Extensive testing has shown a gap of as little as 12mm maintained between insulation and the heat sink will result in LED junction temperatures (the most critical point) being reduced up to 22°C.

This is hugely significant in terms of LED life and performance, or “lumen depreciation” in lighting talk.

Consider this excerpt from the article “Lifetime of White LEDs” published by the US Department of Energy: “The primary cause of LED lumen depreciation is heat generated at the LED junction...Operating the LED at higher than design temperatures will significantly decrease useful life.”

If you look at the range of LED downlights on the market today you will find the majority DO NOT have insulation guards fitted. Why? Because they are imported exactly as they are sold in other countries where there are no IC or IC-F rated downlights.

Home Lighting has been testing and designing insulation guards for more than four years and you will find there is only a very small number of NZ manufacturers or importers who have gone to the same trouble.

Choose wisely and ensure your customer get the life and performance from their LED downlights, and make sure they all have insulation guards fitted.

© Home Lighting 2015. All Rights Reserved.

Mike Austin, Home Lighting’s Technical Manager and member of the Lighting Council NZ, explains the need for insulation guards on IC and IC-F rated downlights.

“The primary cause of LED lumen depreciation is

heat generated at the LED junction...Operating the

LED at higher than design temperatures will significantly

decrease useful life”.Source: US Department of Energy – Lifetime of White LEDs

Insulation Guard


Eclipse SmartLED Dimmer HLDIM-ECL SmartLED phase adaptive dimmer optimised for LED-based lamps and drivers

• Fits PDL, HPM and Clipsal NZ wall switch plate apertures • Optimised for LED lighting loads• Also suitable for 12V dichroic, incandescent and dimmable CFL lamps• 400W maximum, 2W minimum LED load• Adjustment for minimum brightness level• 2-wire design - no neutral connection required• Suitable for 2-way switching• 220-240V AC• 50Hz• <1% to >95% (load dependent)

LED compatibilityThe Home Lighting Eclipse SmartLED Adaptive Phase Dimmer has been tested for compatibility with a number of common New Zealand LED lighting products and brands including, Home Lighting, Sylvania, Pierlite, Crompton, OSRAM etc. in our NZ testing facility. While we cannot test every combination and every product, Home Lighting’s Eclipse SmartLED Dimmer performs exceptionally well in a wide range of LED and non-LED lighting circuits.

If you do not get the desired performance:

• Please check carefully that the LED lighting product you are using is capable of dimming and to what level• That the circuit loading <1% to >95% is not exceeded

Contact our NZ-based Technical Support Team on 0800 733 544 or [email protected] for further assistance.

HLD

IM-E

CL

Compatible with all PDL, HPM and Clipsal switch plates. Switch plate not included.

Integrated LED indicator illuminates the dimmer knob and switch at low dimming levels.

12

3

4

HLDIM-ECLEclipse SmartLED

Dimmer

Includes:

1 x Eclipse SmartLED dimmer module

3 x Dimmer knobs

1 x PDL600 Adaptor set

Optimised for LED

5

PDL600 Adaptor Set

21 4

www.homedownlights.co.nz 12 A division of Gerard Lighting (NZ) Ltd.


RoHS compliant

ON LED MODULE

HL12-NF Compact dimmable LED gimbal downlight with Narrow Flange

HL12

-NF

CA 135°C

ABUTTED ONLY

HL12-NF/01Narrow Flange

White Finish3000K

HL12-NF/55Narrow Flange

Silver Painted Finish3000K

NB: Supplied complete with driver (not shown)

• 76mm dia. hole cut out• 12W CREE LED, 700 Lumens • 25,000 hours average lamp life• Complies with AS/NZS60598.2.2001 Amendment A• CA135• IP20• Weight: 160gms• Complete with dimmable LED driver• Dimmable on most leading and/or trailing edge and universal dimmers• Colours: Warm White 3000K & Cool White 4000K• Tiltable 30° each way• For indoor use only• White or Silver Painted finish

HL12-NF/01/4KNarrow Flange

White Finish4000K

HL12-NF/55/4KNarrow Flange

Silver Painted Finish4000K

25,000HOURS



RoHS compliant

ON LED MODULE

HL12-WF Compact dimmable LED gimbal downlight with Wide Flange

HL12

-WF

CA 135°C

ABUTTED ONLY

HL12-WF/01Wide Flange White Finish

3000K

HL12-WF/55Wide Flange Silver

Painted Finish3000K


• 76-92mm dia. hole cut out• 12W CREE LED, 700 Lumens • 25,000 hours average lamp life• Complies with AS/NZS60598.2.2001 Amendment A• CA135• IP20• Weight: 180gms• Complete with dimmable LED driver• Dimmable on most leading and/or trailing edge and universal dimmers• Colours: Warm White 3000K & Cool White 4000K• Tiltable 30° each way• For indoor use only• White or Silver Painted finish

HL12-WF/01/4KWide Flange White Finish

4000K

HL12-WF/55/4KWide Flange Silver

Painted Finish4000K

25,000HOURS



RoHS compliant

ON LED MODULE

HL94LED-ICF 12W LED Low Height dimmable downlight

HL94LED-ICWhite Round Ceiling

Ring (standard)

HL 9

4LED

-ICF

HL94LED-IC/55Silver Painted Round

Ceiling Ring


• 94-96mm dia. hole cut out• 12W LED, 810 Lumens• 35,000 hours average lamp life• 105° wide beam angle• Complies with AS/NZS60598.2.2:2001 Amendment A• IC-F• IP44• Weight: 320gms• Colour Temperature: 3000K• Average Lamp Life: 35,000 hrs• Complete with remote dimmable LED driver with plug to fixture• Leading & Trailing Edge and C-Bus Compatible• White or Silver Painted Finishes• Ideal for general lighting• For indoor use only• White Ceiling Bezel


35,000HOURS



RoHS compliant

ON LED MODULE

HL122LED-ICF 12W LED dimmable downlight with 125mm hole cut out


125mm

140mm

60m

m


• 125mm dia. hole cut out• 12W LED, 810 lumens• 30,000 hours average lamp life• Complies with AS/NZS60598.2.2:2001 Amendment A• IC-F• IP44• Weight: 300gms• Colour Temperature: 3000K• Complete with remote dimmable LED driver• White or silver ceiling bezel • Wide beam angle perfect for general lighting• Warm white 3000K• For indoor use only

HL122LED-ICF White ceiling

bezel

HL122/55LED-ICF Silver painted ceiling bezel

HL12

2LED

-ICF

30,000HOURS



RoHS compliant

ON LED MODULE

HL109LED-ICF 12W LED version of the popular HD109TC downlight

HL10

9LED

-ICF


73m

m

120mm dia. overall

HL109LED-IC/55Silver painted ceiling bezel

HL109LED-ICWhite ceiling

bezel (standard)


• 100mm dia. hole cut out• 12W LED, 810 Lumen• 35,000 hours average lamp life• Complies with AS/NZS60598.2.2:2001 Amendment A• IC-F• IP44• Weight: 345gms• Complete with dimmable LED driver• Paintable white ceiling bezel• For indoor use only• Wide beam angle perfect for general lighting• Warm white 3000K• White or Silver Painted finish NB: White Ceiling Bezel and Polished Silver Reflector fitted as standard.


35,000HOURS



RoHS compliant

ON LED MODULE

HL109LED/EXT 12W LED exterior version of the HL109LED with non-corrosive polycarbonate reflector

HL10

9LED

/EXT


73m

m

120mm dia. overall

HL109LED/EXT Polycarbonate

reflector


• 100mm dia. hole cut out• 12W LED, 810 Lumen• 35,000 hours average lamp life• Complies with AS/NZS60598.2.2:2001 Amendment A• IC-F• Non-corrosive polycarbonate reflector• IP44• Weight: 345gms• Complete with dimmable LED driver• Paintable white ceiling bezel• For indoor or outdoor use under eaves• Wide beam angle perfect for general lighting• Warm white 3000K• White finish NB: White Ceiling Bezel fitted as standard.


35,000HOURS



RoHS compliant

ON LED MODULE

Phoenix HL88F-IC 10W fire rated LED downlight

Phoe

nix

HL 8

8F-IC


HL88F-IC/3K3000K

HL88F-IC/4K4000K


• 85mm dia. hole cut out• 10W CREE LED, 600 Lumens• 30,000 hours average lamp life• Complies with AS/NZS60598.2.2:2001 (NZ only) Amendment A • 30 / 90 minute fire rated • 20° tiltable • 40° beam angle • IC• IP20• Weight: 340gms• Complete with Sylvania dimmable LED driver and insulation cover• Average Lamp Life: 30,000 hours• Steel chassis and White Bezel• Warm White (3000K) or Cool White (4000K)• For indoor use only

30,000HOURS

19

HL-LED-LEAD 300mm LED driver extension lead

HL-LED-LEAD300mm LED

driver extension lead

• 300mm length• Quick and easy to use• No fixings required

Home Lighting’s LED 300mm Extension Lead is designed to make installation of all Home Lighting LED products easier and ensure correct placement of the driver every time, preserving its life.

As all Home Lighting LED drivers must be installed above insulation this lead provides an extension to allow placement of driver on top of extra thick insulation or attaching to a building element that is further away from the downlight.

Quick and easy to use, clicks into the plugs of the driver and fitting leads with no fixings required.

This will ensure the driver and fitting are operating at correct temperatures helping to ensure the long life of your light fitting.

HL-L

ED-L

EAD

www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.


NB: Downlight and driver supplied separately



RoHS compliant

ON LED MODULE

KAM 30R30° beam angle

reflector

KameleonA new range of customisable and interchangeable LED downlight combinations to suit your home.

KAM 60R 60° beam angle

reflector

KAM 30L30° beam angle

lens

KAM 60L60° beam angle

lens

12W CREE LED Module Complete with dimmable driver and customisable reflector or lens.• 12W, 740 lumens• 30,000 hours average lamp life• IC-F rated• Includes insulation cage• Warm White, 3000K• 7 Year Warranty

30,000HOURS

21

K1 90mm cutout. Round White

Gimbal Tilt Ceiling Ring

K590mm cutout. Round White

Gimbal Tilt Ceiling Ringwith Ribbed White Baffle

K2 90mm cutout. Square White

Gimbal Tilt Ceiling Ring (110x110mm)


Gimbal Tilt Ceiling Ring with Ribbed White Baffle

(110x110mm)


Gimbal Tilt Ceiling Ring with Black Baffle


Gimbal Tilt Ceiling Ring with Black Baffle

(110x110mm)


Fixed Ceiling Ring


Fixed Ceiling Ring (90x90mm)


Gimbal Tilt Ceiling Ring with Ribbed Black Baffle


Gimbal Tilt Ceiling Ring with Ribbed Black Baffle

(110x110mm)


ARCH DOWN- Die-cast aluminium body- Clear glass diffuser- GU10 Max 35W- 220-240v ~ 50Hz- IP44- Matt black- Lamp sold separately- LED compatible- 68mm W x 92mm D x 81mm H

APPLICATIONS - Exterior wall

Product Code: HE2291BLK 92

81

68

2


ARCH UP/DOWN- Die-cast aluminium body- Clear glass diffuser- GU10 Max 2 x 35W- 220-240v ~ 50Hz- IP44- Matt black- Lamp sold separately- LED compatible- 68mm W x 92mm D x 150mm H


Product Code: HE2292BLK

150

92

68

2


TABLET DOWN- Die-cast aluminium body- Frosted glass diffuser- 3 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 95mm W x 82mm D x 198mm H



2


TABLET UP/DOWN- Die-cast aluminium body- Frosted glass diffuser- 6 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 95mm W x 82mm D x 198mm H



2


LINEAR ROUND- Die-cast aluminium body- Opal PC diffuser- 3 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 140mm dia., 55mm D


Product Code: HE1003SBLKRD

2


HOURGLASS ROUND- Die-cast aluminium body- Opal PC diffuser- 3 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 140mm dia., 55mm D


Product Code: HE1002SBLKRD

2


LINEAR SQUARE- Die-cast aluminium body- Opal PC diffuser- 3 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 140mm W x 53mm D x 140mm H


Product Code: HE1013SBLKSQ

2


HOURGLASS SQUARE- Die-cast aluminium body- Opal PC diffuser- 3 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 140mm W x 53mm D x 140mm H


Product Code: HE1012SBLKSQ

2


BRICK UP/DOWN- Die-cast aluminium body- Frosted glass diffuser- 6 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED



110

71

172

2


‘The Giants’ IP66 Exterior Range 12W LED IP66 Round and Oval Ceiling/Wall Lights

KauriHERCL/BLKLED Round, Black*

• 12W LED• 840 lumens• IP66 weather protection• 20,000 hours average lamp life• Non-corrosive polycarbonate housing• Opal diffuser• Indoor or outdoor use • 3000K Warm White• Sensor option available (on Kauri or Rimu only)• Oval 290 x 200 x 100mm or Round ø300 x 100mm• Black or White• 2 Year Warranty

20,000HOURS2

RimuHERCL/WHLED Round, White*

ManukaHEOCL/BLKLED

Oval, Black

TotaraHEOCL/BLKLED

Oval, White

* Sensor options available

© H

ome

Light

ing

2015

www.homedownlights.co.nz

For more informationPhone 0800 733 544

Fax 09 525 [email protected]

QUALITY INTEGRITY REASSURANCE

ONE HOME, ONE CHOICE

Interior & Exterior - Pierlite · 2015. 5. 3. · Interior Range HD109TC HD109/SQ/TC HD110TC...

Documents

Transcript of Interior & Exterior - Pierlite · 2015. 5. 3. · Interior Range HD109TC HD109/SQ/TC HD110TC...