Instruction Manual - Eaton Internormen EBT 01 - Extension Bluetooth, 1.1, e

7
EBT 01 Extension Bluetooth Instruction manual Version 1.1 ID-no.: ................................ Version valid from: 14.06.2012

description

manual on internormen filter

Transcript of Instruction Manual - Eaton Internormen EBT 01 - Extension Bluetooth, 1.1, e

  • EBT 01 Extension Bluetooth

    Instruction manual

    Version 1.1

    ID-no.: ................................ Version valid from: 14.06.2012

  • 2 2

    Index Page 1. GENERAL 3

    1.1. Intended applications 3

    1.2. General informations 3

    2. INSTALLATION 3

    2.1. Installation of the EBT 01 in the In-line-display unit 3

    2.2. Establish a connection to the external computer 5

    3. APPENDIX 6

    3.1. Technical data 6

    3.2. Trouble shooting 6

  • 3 3

    1. General

    1.1. Intended applications The EBT 01 allows the wireless data transfer (maximum range approximate 50 m) from Internormen In-line units to external computers. It is intended for the transmission of stored and actual measurement results from MPM 01, CCM 01 or WSTM 01 to an external computer. This manual contains informations and safety advices, which ensure risk free operations and which help to keep the device in an ideal condition. Therefore it is necessary that all people involved in operating the EBT 01 do note this manual unconditionally.

    1.2. General informations Bluetooth is an industry standard according to IEEE 802.15.1 for the wireless short distance data transfer ( up to 50 m outdoor depending on the used Bluetooth adapter on the computer ). The EBT 01 - module is a complete Bluetooth-solution, which consists of the Bluetooth controller LMX9830, an antenna and complete integrated software protocol stack (Bluetooth 2.0). The EBT 01 in combination with a commercial Bluetooth adapter is intended for wirelless transmission of the stored results as well of the actual measurement results from an Internormen In-line-display unit (MPM 01, CCM 01, WSTM 01) to an external computer.

    2. Installation

    2.1. Installation of the EBT 01 in the In-line-display unit

    Disconnect the In-line-display unit from the power supply.

    Connecting of the EBT 01 with the display unit: o loosen the screws of the cover from the display unit and remove the cover.

  • 4 4

    o Connect the EBT 01 modul with the connection SV 1 on the In-line-display unit

    by using the dorsal black plug.

    CAN Interface

    RESET

    RS 232

    Fastening again of the cover from the display unit and reconnecting of the power supply for the display unit.

    The EBT 01 is now ready for use. An additional power supply for the EBT 01 is not necessary.

    SV 1

    SV 2

  • 5 5

    2.2. Establish a connection to the external computer

    If not yet available on the computer, you have to install the Bluetooth adapter (for example: with USB interface) according to the instruction manual of the manufacturer.

    Establish a connection with the EBT 01 by using the software of the Bluetooth-adapter

    accomplish a hardware search. (passwort EBT 01: 2094) o The EBT 01 will be recognized by the computer by means of the SPP (Serial

    Port Protocol).

    The EBT 01 is now ready for operation and a data transfer from the Inline-display unit to the computer can be arranged now.

  • 6 6

    3. Appendix

    3.1. Technical data Bluetooth class: Class 2

    Frequency range: 2,4 2,483 GHz

    Ambient temperature: 070 C / 32158 F

    Chip set: LMX9830

    Antenna: integrated Chip-antenna

    Dimensions: 25 x 69 mm

    Weight: ca. 11 g

    Operating distance: max. 50 m outdoor

    3.2. Trouble shooting No settings of the EBT 01 are done by the operator. In case of the malfunctions, please contact INTERNORMEN Technology GmbH. A brief description of the problem would expedite the trouble shooting and the repair process. To chexk your warranty and to answer questions by phone we need the ID- number and the date of purchase of the instrument.

  • North America HQ 70 Wood Ave., South, 2nd Floor Iselin, NJ 08830 Toll Free: (800) 656-3344 (North America Only) Voice: (732) 767-4200 China No. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. China Voice: +86-21-5200-0099 Singapore 4 Loyang Lane #04-01/02 Singapore 508914 Voice: +65-6825-1668

    Europe/Africa/Middle East Friedensstrae 41 D-68804 Altlussheim, Germany Voice: +49-6205-2094-0 Auf der Heide 2 53947 Nettersheim, Germany Voice: +49-2486-809-0 An den Nahewiesen 24 55450 Langenlonsheim, Germany Voice: +49 6704 204-0 Brazil Av. Julia Gaioli, 474 Bonsucesso 07251-500 Guarulhos, Brazil Voice: +55 (11) 2465-8822

    For more information, please e-mail us at [email protected] Visit us online eaton.com/filtration for a complete list of Eatons filtration products. 2012 Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA.

    All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the users responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.