Installing on Windows - Autodesk · PDF filePublished By: Autodesk, Inc. 111 Mclnnis Parkway...
Transcript of Installing on Windows - Autodesk · PDF filePublished By: Autodesk, Inc. 111 Mclnnis Parkway...
Installing on WindowsAliasStudio 2008
Copyright and trademarksAliasStudio 2008© Copyright 2002-2007 Autodesk, Inc. All rights reserved.This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose.AUTODESK, INC., MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS, AND MAKES SUCH MATERIALS AVAILABLE SOLELY ON AN "AS-IS" BASIS. IN NO EVENT SHALL AUTODESK, INC., BE LIABLE TO ANYONE FOR SPECIAL, COLLATERAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF ACQUISITION OR USE OF THESE MATERIALS. THE SOLE AND EXCLUSIVE LIABILITY TO AUTODESK, INC., REGARDLESS OF THE FORM OF ACTION, SHALL NOT EXCEED THE PURCHASE PRICE, IF ANY, OF THE MATERIALS DESCRIBED HEREIN. Autodesk, Inc., reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product at all times in the future. Autodesk TrademarksThe following are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, ActiveShapes, Actrix, ADI, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Insight, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Create>what's>Next> (design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design|Studio (design/logo), Design Your World, Design Your World (design/logo), DWF, DWG, DWG (logo), DWG TrueConvert, DWG TrueView, DXF, EditDV, Education by Design, Extending the Design Team, FBX, Filmbox, FMDesktop, GDX Driver, Gmax, Heads-up Design, Heidi, HOOPS, HumanIK, i-drop, iMOUT, Incinerator, IntroDV, Kaydara, Kaydara (design/logo), LocationLogic, Lustre, Maya, Mechanical Desktop, MotionBuilder, ObjectARX, ObjectDBX, Open Reality, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProjectPoint, Reactor, RealDWG, Real-time Roto, Render Queue, Revit, Showcase, SketchBook, StudioTools, Topobase, Toxik, Visual, Visual Bridge, Visual Construction, Visual Drainage, Visual Hydro, Visual Landscape, Visual Roads, Visual Survey, Visual Syllabus, Visual Toolbox, Visual Tugboat, Visual LISP, Voice Reality, Volo, and Wiretap. The following are registered trademarks or trademarks of Autodesk Canada Co. in the USA and/or Canada and other countries: Backburner, Discreet, Fire, Flame, Flint, Frost, Inferno, Multi-Master Editing, River, Smoke, Sparks, Stone, Wire.All other brand names, product names or trademarks belong to their respective holders.Third-Party Copyright NoticesThis product includes software developed by the Apache Software Foundation.Macromedia Shockwave™ Player and Macromedia Flash™ Player software by Macromedia, Inc., Copyright © 1995-2000 Adobe Systems Incorporated. All rights reserved.Portions relating to JPEG Copyright © 1991-1998 Thomas G. Lane. All rights reserved. This software is based in part on the work of the Independent JPEG Group.Portions relating to TIFF Copyright © 1997-1998 Sam Leffler. Copyright © 1991-1997 Silicon Graphics, Inc. All rights reserved.GOVERNMENT USEUse, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in FAR 12.212 (Commercial Computer Software-Restricted Rights) and DFAR 227.7202 (Rights in Technical Data and Computer Software), as applicable. Published By: Autodesk, Inc. 111 Mclnnis Parkway San Rafael, CA 94903, USADocumentation build date: April 3, 2007
Contents
Introduction 6Installation procedures for Windows 7Installation types 8
System requirements 11Determining your system’s configuration 12System requirements for AliasStudio 13System requirements for Spider 16System requirements for StudioViewer 17Setting system hardware properties 18
Installing procedures 21Before you begin: checklist 22Installing AliasStudio software 23Installing Spider 28Installing StudioViewer 29Installing online help and other documentation 30
Licensing Windows 35Introduction 36Your software may already be licensed 39Activating the software from a serial number 41Activating the software from a license 44Setting up floating servers without installing the software 46
Starting AliasStudio 49Running AliasStudio 50Setup new user accounts and working directories 51Optimizing AliasStudio performance 52
Modifying the AliasStudio installation 53Adding or removing AliasStudio components 54Reinstalling (repairing) AliasStudio software 55Removing (uninstalling) AliasStudio software 56
3
Troubleshooting 57Online help and support information 58Installation troubleshooting 63Licensing troubleshooting 65Advanced license troubleshooting 70Understanding log file error messages 73Licensing diagnostic tools 76Confirming FLEXid dongle drivers installation (for hardware
locks only) 81Starting AliasStudio troubleshooting 82
Index 83
4
Installing AliasStudio on Windows
5
IntroductionHow to install StudioTools.
● DesignStudio
● Studio
● AutoStudio
● SurfaceStudio
How to install:
● Spider
● StudioViewer
How to install:
● Drivers for Hardware Lock
6Introduction
Installation procedures for Windows
To install AliasStudio you must:
1 Prepare your system and verify that it is qualified to run AliasStudio (See System requirements for AliasStudio).
2 Install AliasStudio and the AliasStudio online documentation and Courseware (See Installing online help and other documentation on page 30.).
3 Install a license to run AliasStudio if you are installing new or additional licenses (See Licensing Windows on page 35.).
4 Start AliasStudio (See Running AliasStudio on page 50.).
5 After you install AliasStudio, you can easily modify the installation (See Adding or removing AliasStudio components).
6 If you experience any problems, See Troubleshooting.
7Introduction
Installation procedures for Windows
Installation types
Before you begin installing AliasStudio, you must decide which type of installation you will use.
Local installation
In a local installation, the AliasStudio software and a license are on a local computer. A single user at this machine can run AliasStudio.
● One computer◆ install software (See Installing procedures)◆ install license, if required (See Licensing Windows on
page 35.)
In this type of installation a node-locked license is used. It enables you to run AliasStudio on one particular computer. This computer must have an Ethernet ID or hardware lock.
License server installation
In a license server installation, the AliasStudio software is installed on multiple client computers and the licenses and FLEXlm server software are installed on a server.
8IntroductionInstallation types
● One Server◆ install AliasStudio utilities (recommended as these
tools have been updated).◆ install AliasStudio licenses, if required (See Licensing
Windows on page 35.).
● Many users◆ install AliasStudio software (see Installing procedures)
For this installation a floating license is used. It allows anyone on the network to use the licensed software, on as many machines as you have purchased licenses for. For example, if you install five licenses on your server, up to five machines on the network can run the licensed software at any one time.
You choose one machine on your network to act as the server for these licenses. This server machine needs either an Ethernet ID or a hardware lock. All other machines must be able to connect to and receive their license from this server.
.
One Server
- install licenses
Many Users
- install AliasStudio
9Introduction
Installation types
10IntroductionInstallation types
System requirementsVerify if your computer is qualified to run AliasStudio.
11
Determining your system’s configuration
To determine your system configuration
1 Choose Start > Run, type winmsd, and press Enter.to open the System Information window.
2 Click on the System Summary to view information about the version and memory.
3 Click on Components and then Display to view information about the monitor.
4 Click on Storage and then Drives and SCSI to view information on the drive or disk space available.
12System requirementsDetermining your system’s configuration
System requirements for AliasStudio
Autodesk certifies certain system configurations from leading manufacturers of Windows workstations.
Not all hardware configurations are qualified at this time. For more information, please refer to the Qualification Hardware Charts for Autodesk products, at www.autodesk.com/qual-charts/.
The system requirements for running AliasStudio are:
● TCP network connection.
● Windows 2000 Professional with SP2 or greater, Windows XP Professional with SP2 or Windows XP Professional x64 Edition with SP2
● Pentium IV processor, at least 1.5 GHz
● 1GB of hard drive space
● 1GB Memory (2GB or more highly recommended)
● A CD-ROM drive on this machine or a shared CD-ROM drive accessed via a networked mapped drive.
● ATI FireGL or Nvidia Quadro FX graphics card with 128MB video memory (256MB or greater video memory highly recommended). A list of supported graphics cards is available at www.autodesk.com/qual-charts/.
● Graphics card driver. Refer to the latest qualification chart, at www.autodesk.com/qual-charts/. Driver software is available from the manufacturer’s Web site.
● A three-button mouse (with no custom button assignments) and mouse driver software.
● Quicktime player to create and view QTVR files. The QuickTime player software is available at www.quicktime.com
● Driver software for optional hardware such as Wacom tablets.
● To license AliasStudio, you need the following:◆ node-locked licenses: an Ethernet card with a valid
MAC address on each machine.◆ floating licenses: an Ethernet card with a valid MAC
address on the license server.
13System requirements
System requirements for AliasStudio
◆ Optionally, a hardware lock (dongle).◆ See Installation types
● Improved online documentationThis version of StudioTools online documentation requires a recent browser. Version 4 or later of Internet Explorer or version 7 or greater of Netscape or a current version of Mozilla is required.To install the documentation, use the documentation installer or unzip the files into a location where you want the help system to be accessed. Use the pathname (without the terminal slash) to link the documentation to Studio by putting this information in Preferences > General preferences under the System tab. The pathname must be prefixed by file:/// for example,file:///C:/Program Files/Autodesk/AliasStudio2008/Help
IE Settings for Windows XP SP2To run the new StudioTools help system, computers that have been updated with XP Service Pack 2 need to have some settings changed.Changes to default security settings are made when an upgrade to Windows XP Service Pack 2 is performed. These changes can result in unexpected popup messages requiring you to explicitly allow the help system to be viewed.When you first open the online help system, you’ll get the following message:◆ To help protect your security, Internet Explorer has
restricted this file from showing active content that could access your computer.
You can then click for the option to Allow Blocked Content. If this is done, you’ll receive a Security Warning that says:Allowing active content such as script and ActiveX controls can be useful, but active content might also harm your computer. Are you sure you want to let this file run active content?To allow this content to run without getting blocked, please follow the following steps:
1 Open Internet Explorer
2 Go to Tools > Internet Options > Advanced Tab
14System requirementsSystem requirements for AliasStudio
3 Scroll down to the section labeled Security
4 Check the box labeled “Allow active content to run in files on My Computer”
5 Click “OK” and then close the Internet Options window.
● Flash plug-in to view animated tutorial sequences. Free plug-ins are available from www.macromedia.com.
● installing Adobe Acrobat version 6.0 or higher is required to view the PDFs. A free copy of this application can be downloaded from www.adobe.com
15System requirements
System requirements for AliasStudio
System requirements for Spider
Autodesk certifies certain system configurations from leading manufacturers of Windows workstations.
Not all hardware configurations are qualified at this time. For more information, please refer to the Qualification Hardware Charts for Alias products at www.autodesk.com/qual-charts/.
The system requirements for running Spider are:
● Windows 2000 Professional with SP2 or greater, Windows XP Professional with SP2 or Windows XP Professional x64 Edition with SP2
● Windows Internet Explorer version 5 or later
● OpenGL-capable graphics card
● Three-button mouse
● 25 MB of disk space
● 256 MB RAM minimum The amount of RAM that Spider needs to run is directly related to the size of the data set that you want to work on. As a general rule, Spider needs 512 MB of RAM for every 2.5 million points.
16System requirementsSystem requirements for Spider
System requirements for StudioViewer
Autodesk certifies certain system configurations from leading manufacturers of Windows workstations and graphics card vendors.
Not all hardware configurations are qualified at this time. For more detailed hardware requirements and qualified configurations, please refer to the Qualification Hardware Charts for Alias products at www.autodesk.com/qual-charts/.
The minimum system requirements for running StudioViewer are:
● TCP network connection.
● Windows 2000 Professional with SP2 or greater, Windows XP Professional with SP2 or Windows XP Professional x64 Edition with SP2
● Pentium III or 4 processor, at least 500 MHz
● 1GB of hard drive space
● 1GB Memory (2GB or more highly recommended)
● A CD-ROM drive on this machine or a shared CD-ROM drive accessed via a networked mapped drive.
● ATI FireGL or Nvidia Quadro FX graphics card with 128MB video memory (256MB or greater video memory highly recommended). A list of supported graphics cards is available at www.autodesk.com/qual-charts/.
17System requirements
System requirements for StudioViewer
Setting system hardware properties
The performance of AliasStudio in displaying graphics depends on the quality of your graphics card and on the option settings in the Display Properties window of your graphics card.
To learn the option settings for graphics cards that are certified for use with AliasStudio, see the latest qualification chart, at www.autodesk.com/qual-charts/.
Also see the README file on your installation CD ROM for last-minute updates.
If your graphics card is not certified, perform the following steps. Some of these steps offer only general guidelines because each manufacturer has a unique set of display options.
To set up your graphics card
1 Right-mouse click a blank part of your Windows desktop and choose Properties from the pop-up menu.This displays the Display Properties window, also available through the Control Panel.
2 Click the Settings tab.
3 From the Color Palette pull-down menu, choose True Color.This specifies 24 bits of color for best color quality in displayed images.
4 Drag the Desktop Area slider to the best display resolution supported by your hardware.
5 When the driver software for your graphics card was installed, a tab named for the card was likely created in the Display Properties window. The tab has performance options that vary with the kind of card. Here are some general suggestions for setting performance options:In the Display Properties window, click the tab named for your graphics card, if there is one. AliasStudio works with four-bit or greater overlay planes, whether they are single-buffered or double-buffered.
18System requirementsSetting system hardware properties
6 Click Apply, then OK.
7 Some graphics cards have a AliasStudio OpenGL preset. Check the qualification charts at www.autodesk.com/qual-charts/ for information regarding setting up your video card.
To set up your mouse and keyboard
The mouse buttons should be set as follows:
1 left mouse button: click
2 middle mouse button: middle mouse button
3 right button: contextual menu/right mouse button To check or set the mouse buttons, go to the Windows Start menu and choose Settings > Control Panel > Mouse. Use standard mouse driver option settings. Do not, for example, set the middle mouse button to work as a double-click of the left button. Some vendors offer Windows enhancement software that lets you use your mouse to activate windows and panels in the same way as in UNIX operating systems. For example, you can download an XMouse productivity tool from microsoft.com to simulate UNIX mouse-window activation. However, we have not tested such software for use with AliasStudio for Windows. A wheel mouse (such as Microsoft Intellimouse) should operate as a 3-button mouse. If not, re-configure it in your Windows Control Panel (choose Start > Settings > Control Panel > Mouse). You do not need to install a new driver.
19System requirements
Setting system hardware properties
20System requirementsSetting system hardware properties
Installing proceduresLearn how to install the AliasStudio software, online documentation, and courseware.
21
Before you begin: checklist
You must run the installer on each computer where you want to run the software. If you’re going to use a computer to serve licenses, you must install the License utilities on that computer.
Issue Required action
Your computer system must meet specific hardware and software requirements for you to successfully install and run AliasStudio.
Autodesk does not support hardware and software configurations that do not meet these requirements.
Review the requirements section in this chapter (System requirements (page 11)).
The most up-to-date information on specific hardware system qualifications for your computer can be found on the Autodesk Web site:
www.autodesk.com/qual-charts/
You must have administrator privileges to install AliasStudio. (You do not need to be an administrator to launch AliasStudio once it is installed.)
If you do not have administrator privileges on your computer, you’ll need to contact your system administrator.
To avoid any conflicts when installing AliasStudio, we recommend that you close all other programs and disable virus detection software before launching the installer.
Before installing:
• Close all programs.
• Disable any virus detection software.
Having multiple versions of AliasStudio installed on a machine and adding each version’s path to the user’s environment PATH variable may cause version conflicts.
Only add the path currently needed for the version of AliasStudio that is being run. Under most circumstances AliasStudio performs correctly if the path is not set.
22Installing proceduresBefore you begin: checklist
Installing AliasStudio software
The AliasStudio CD-ROM has an installation program that guides you through installation.
● Your user account needs administrator privileges, or you need to log on as administrator.
● Install AliasStudio on each computer where you want to run it.
● You can install from a local CD-ROM drive or from a shared CD-ROM drive accessed via a network mapped drive.
● If you are upgrading from an older version, the installation proceeds as normal. The older version is kept, and you are able to use it along with the newer version. If you added a shortcut icon in the prior installation, it remains.
To install AliasStudio on Windows
1 There are three methods of installation:
● If you are installing directly from the CD-ROM, load the CD into your computer. The Autorun program starts and an autorun window appears. (If it doesn’t, browse the CD-ROM and double-click the Setup.exe icon.)The AliasStudio Installation window appears, giving you a choice of products and actions.
● If you have copied the CD-ROM onto your hard drive, you can install AliasStudio from there. Open the directory and double-click the Setup.exe icon.
● If you plan to install and run AliasStudio on a server for clients machines to access the StudioTools software, please see StudioTools "Application Server" Install (page 27).
23Installing procedures
Installing AliasStudio software
2 Click Install AliasStudio. The splash screen offers you five choices:◆ Install AliasStudio ◆ Install Spider◆ Install StudioViewer◆ Install driver for hardware lock◆ Browse CD◆ Exit the installer.
Note Software drivers for hardware locks (dongles) are not installed by default for node-locked dongle machines or license server dongle machines. The initial AliasStudio installation window provides a button to install a sentinel licensing dongle driver for hardware locks. If selected, the Macrovision FLEXid Driver Installation prompt appears on your desktop. Select Install and restart your computer once completed.
3 Click Install AliasStudio. The Autodesk Product Configuration Wizard opens. Read through the Software License Agreement to the bottom (you’ll need to use the scroll bar), and then click I agree to the terms and conditions to continue installing the software. Choose I do not agree to the terms and conditions if you do not want to proceed.
Note If this version of AliasStudio is already installed, the InstallShield Wizard Setup Maintenance window appears. To re-install (or “repair”) AliasStudio, see Modifying the AliasStudio installation.
4 Click Next to continue. The InstallShield Wizard launches with a Welcome page. Click Next.
5 You are prompted to choose the destination where the software will be installed.
6 Choose a location:
● To install AliasStudio to the default location (C:\Program Files\Autodesk\AliasStudio2008\), click Next.
● To install AliasStudio to another location, click Change.◆ The Change Current Destination Folder window
appears.
24Installing proceduresInstalling AliasStudio software
◆ Navigate to the drive and folder you want to install the software in.
When you have a directory name, click OK.
7 The Setup Type window appears.
● Choose the type of installation setup you want and then click Next: ◆ Complete – Installs StudioTools without its help or
online documentation. ◆ Custom – Lets you choose which components to
install. If you are installing the license server tools software for a floating license server, choose the Custom> Licensing option so you can select the licensing software options.
● If you clicked Custom, the Select Components window appears. Click the + sign to the left of AliasStudio to see the components. Some components also have + signs, indicating there are further choices that can be made. Each component has a pull-down menu on the icon associated with it, that enables you to choose:◆ This feature will be installed on local hard drive◆ This feature, and all subfeatures, will be installed on
local hard drive◆ This feature will be installed when required◆ This feature will not be available.
Note To install only renderers, click only Renderers and License utilities.
To install... Choose components
The basic AliasStudio software
click Base
AliasStudio renderers click Renderers
Utilities to license AliasStudio software and setup floating license servers.
click License utilities
Open Digital Studio click ODS
25Installing procedures
Installing AliasStudio software
Note Software drivers for hardware locks (dongles) are not installed by default for node-locked dongle machines or license server dongle machines. The initial AliasStudio installation window provides a button to install drivers for hardware locks. If selected, the Macrovision FLEXid Driver Installation prompt appears on your desktop. Select Install and restart your computer once completed.
8 After you have chosen AliasStudio components, click Next.
9 Click Next in the window that follows it, as well. Selecting the Add to System Path check box in this dialog will ensure that the AliasStudio 2008 Program Folder is added to the System Path, enabling AliasStudio 2008 commands to be invoked from the command prompt.
10 Click Install in the InstallShield Wizard window to begin the installation process.
11 The Installing AliasStudio 2008 window appears. This window displays the progress of the installation. Do not click Cancel. Due to the size of the software, the installation may take a few minutes.
12 When the installation is finished, the InstallShield Wizard Completed window appears. Click Done, select Exit the Installer from the DemoShield window, click Finish, and remove all media including the AliasStudio for Windows installation CD-ROM.
13 After exiting the AliasStudio 2008 installer, insert your AliasStudio Documentation CD to install the online help documentation, PDF files, courseware files and movies. See the Installing online help and other documentation section later in this book for detailed instructions.
Note It is not usually necessary to restart your computer after installing AliasStudio. If it is, the installation window will tell you so. Installing a new version of DirectConnect may require you to restart.
Congratulations! You have now installed AliasStudio. But before you can run it, you must install a license. See Licensing Windows (page 35) in this book.
26Installing proceduresInstalling AliasStudio software
AliasStudio "Application Server" Install
Microsoft's Windows Installer technology provides the ability to install software on a server and run the applications from a client workstation over the network. In this configuration the bulk of the software is installed once on the server; each client requires only a minimal install to create shortcuts that reference files on the server.
This provides a number of benefits for organizations that have a large install base of AliasStudio:
● Faster client installations -- only a few files are installed on each client workstation, so the installation takes much less time than it would for a full product install.
● Reduced disk space requirements on the client — again, because few files are installed on the client workstation, very little disk space is consumed.
Installing AliasStudio using an Application Server
For instructions on installing AliasStudio for an Application Server, see the ReadMe.txt file in the AppServe folder at the top level of the installation CD.
27Installing procedures
Installing AliasStudio software
Installing Spider
You can install Spider from the AliasStudio CD-ROM. Spider's installation program guides you through installation.
28Installing proceduresInstalling Spider
Installing StudioViewer
You can install StudioViewer from the AliasStudio CD-ROM. StudioViewer's installation program guides you through installation.
29Installing procedures
Installing StudioViewer
Installing online help and other documentation
When you install AliasStudio, the online documentation is not automatically installed. You can also view the Help files directly from the Documentation CD.
Note This version of AliasStudio online documentation requires a recent browser: Version 4 or later of Internet Explorer, or version 7 or greater of Netscape, or a current version of Mozilla is required. Please read information about security settings at the end of this section.
To install the documentation
1 Place the AliasStudio Documentation CD into your CD-ROM drive.
2 Wait a few seconds for the AliasStudio Documentation 2008 Installer page to appear.If the Installer page does not automatically open, double-click install.exe in the \bin\win32 folder on your CD-ROM drive (usually D:) to launch the application.
3 Click Next.The Select destination for AliasStudio Documentation 2008 page appears.
By default, the documentation is installed in the /Help folder under your AliasStudio installation folder, if AliasStudio 2008 has already been installed. (The default location is C:\ProgramFiles\Autodesk\AliasStudio2008\Help) If AliasStudio has not been installed, the documentation will be placed under your home folder, typically C:\Documents and Settings\<username>\Help.
4 To choose a different folder, click the Change button to open the Select writable destination window. You must have permissions to write to the folder you choose. It can be a folder on a local machine or a networked machine.
5 Browse for the folder that you want, and click OK.
30Installing proceduresInstalling online help and other documentation
6 Click Next on the Select destination for AliasStudio Documentation 2008 page.
The Installing AliasStudio Documentation 2008 page appears, and installation begins. The whole process will take a few minutes. A progress bar is displayed while the files are copied. The material copied includes:
● HTML online help files
● Viewlets (movies that illustrate some aspects of the tutorials).
● PDF files (for printing).
After installation is completed, click Done.
7 Remove the CD from your CD-ROM drive.
8 In AliasStudio, choose Preferences > General Preferences.
9 Open the System section and in the Help Location field type (or browse to) the path or URL of the Help folder.
10 Restart AliasStudio to activate the new preferences.Note Not installed, but available on the CD for copying into
your user_data directory, is the CourseWare directory. CourseWare files (Alias wire files, and other support files), are required to complete the Learning AliasStudio and Technical Surfacing tutorials.
To read help files from the CD-ROM
If necessary, you can set the Help location option to point to the documentation CD and use the online help directly off the CD, as long as it is in the CD-ROM drive.
1 In AliasStudio, choose Preferences > General Preferences.
2 Open the System section and in the Help Location field type the path to the online Help folder on your CD-ROM drive. For example: e:\Help.
3 Restart AliasStudio to activate the new preferences.
31Installing procedures
Installing online help and other documentation
To install the tutorial courseware
The CourseWare files (Alias wire files and other support files) are not installed automatically when you install the documentation from the AliasStudio Documentation CD. These files are required to complete the Learning AliasStudio and Technical Surfacing tutorials.
1 Place the AliasStudio Documentation CD in your CD-ROM drive and find the CourseWare folder.
2 Copy the CourseWare folder from its location on your hard drive or CD-ROM drive into your user_data folder (usually C:\Documents and Settings\<user_name>\My Documents\StudioTools\user_data).
To print a copy of the documentation
Printable PDF files are included on the StudioTools Documentation CD in the PDFs folder. Read the copyright notice included with the online help (Help/Other/Copyright.html) before printing.
Software to view the PDF and movie files
The PDF and movie files (Flash Viewlets) require reader software to view them. Adobe's Acrobat Reader and FlashPlayer software are probably already installed on your computer. To download the latest version of Acrobat Reader, visit the following page:
● www.acrobat.com
To download the latest version of a Flash plug-in for your browser, visit
● www.adobe.com and choose Get Flash Player from the Downloads tab.
To read the help files from a web server If your local area network has a web server, you can install the documentation on the Web server.
32Installing proceduresInstalling online help and other documentation
Alternatively, you can install a Web server on your own computer and use it to serve the help files. The supported platforms include personal web servers as optional installations (for example, IIS on Windows). You can also read the help files from Autodesk’s external web server. Choose Support from the main page, and navigate to Autodesk AliasStudio, and then to the AliasStudio Support Center. Choose the product documentation from the list, and copy the URL.
1 In AliasStudio, open Preferences > General Preferences and set System > Help Location to the URL of the files on the Web server.
2 Follow the steps in the Installing online help and other documentation section for information on browser settings.
IE Settings for Windows XP SP2
To run the AliasStudio help system, computers that have been updated with Windows XP Service Pack 2 need to have some settings changed.
Changes to default security settings are made when an upgrade to Windows XP Service Pack 2 is performed. These changes can result in unexpected popup messages requiring you to explicitly allow the help system to be viewed.
When you first open the online help system, you'll get the following message:
To help protect your security, Internet Explorer has restricted this file from showing active content that could access your computer.
You can then click for the option to Allow Blocked Content. If this is done, you'll receive a Security Warning that says:
Allowing active content such as script and ActiveX controls can be useful, but active content might also harm your computer. Are you sure you want to let this file run active content?
33Installing procedures
Installing online help and other documentation
To allow this content to run without getting blocked, please follow the following steps:
1 Open Internet Explorer.
2 Go to Tools >Internet Options >Advanced Tab.
3 Scroll down to the section labeled Security.
4 Check the box labeled Allow active content to run in files on My Computer.
5 Click OK and then close the Internet Options window.
34Installing proceduresInstalling online help and other documentation
Licensing WindowsLearn how to receive and install a license.
If you are a new customer ...
If you are a new customer and you have a serial number, go to:
◆ Activating the software from a serial number (page 41)
This topic applies for both node-locked and floating licenses.
If you have a license...
If you already have a license for your AliasStudio software, go to:
◆ Activating the software from a license (page 44)
This topic applies for both node-locked and floating licenses.
To set up your floating license server...
For a Windows license server with the AliasStudio software installed, activate the software on the server using the topics mentioned above.
If you do not plan to install and run the AliasStudio software on the server machine, go to:
◆ Setting up floating servers without installing the software (page 46)
If you are a Platinum customer...
If you are an AliasStudio Platinum membership customer, there may be a prepared license for you. Go to:
◆ Your software may already be licensed (page 39)
35
Introduction
What licensing does...
A license is a coded record of your software purchase. The license resides in a license file on your machine.
When you need a license
You must go through the process of obtaining and installing a license if:
● You are installing AliasStudio for the first time
● You are upgrading AliasStudio from an older version
● You are relocating AliasStudio to a different computer.
Some definitions
Serial NumberA record of what you purchased from Autodesk, required for obtaining a license through Online Product Activation. Here is a sample of what a serial number might look like:
STF030-B-3322-0933-7182-1111-0000or it might look like:
342-52134876If you did not receive a serial number when you purchased the product, contact your local Autodesk sales office or your reseller.
Hardware ID (Host ID)An alphanumeric code that identifies the machine that is authorized to run the software, required for Online Product Activation. This number can be an ethernet ID (also known as a MAC Address) or a hardware key (dongle). The Product Configuration wizard will, in most cases, identify your MAC Address. Or, you can get your Hardware ID by choosing Licensing Utility Tasks from the Product Configuration Wizard, and selecting Show OPA Hardware Identifiers on this computer.
36Licensing WindowsIntroduction
Note If you are looking for the Hardware ID for a laptop, contact your local system administrator, as the number that will be displayed by the Product Configuration wizard will not be correct.
Online Product ActivationAn automated activation process where you submit an online form with your serial number and hardware ID, and a license is automatically generated and sent back.
Product Configuration WizardA tool that uses Online Product Activation to allow you to request and install your license easily.
LicenseUpdate.exeAn installer containing license data for existing Autodesk AliasStudio Platinum membership customers.
Node-locked licenseA license for a single computer. It lets you run AliasStudio only on the computer where the license is installed. (Or, in the case of hardware locks, on the computer where the hardware lock is attached.) Nodelocked licenses look similar to the following sample:
FEATURE Studio sgiawd 2008 09-may-2007 \ uncounted 7CD390F11000\HOSTID=123456789012
Floating licenseA license to be shared by various computers on a network. The Autodesk AliasStudio software is installed on many computers, each with a license file that accesses the floating licenses installed on a server. Floating licenses require client and server setup. Also called a site license. Floating licenses look similar to the following sample:
SERVER pc-server 123456789012 7111VENDOR sgiawdFEATURE Studiof sgiawd 2008 10-may-2007 1 FC29A6FBF000
37Licensing Windows
Introduction
License fileA file with encrypted data that enables Autodesk AliasStudio to run on your machine. A license is required to run the software.
ClientIn floating license configurations, the machine that requests a license from the license server
ServerIn floating license configurations, the machine that provides licenses as requested by users on client machines.
SPAR formIf you do not have a serial number, you’ll need to fill one of these out. Go to www.autodesk.com/spar.
38Licensing WindowsIntroduction
Your software may already be licensed
Use these instructions if:
● You are an Autodesk AliasStudio Platinum membership customer
Do not use these instructions if:
● You are a new customer
● You are an existing customer, but not an Autodesk AliasStudio Platinum membership customer
If you are an existing Autodesk AliasStudio Platinum membership customer, your licenses may be included in LicenceUpdate.exe on the software CD. The LicenseUpdate application installs encrypted licenses.
Double-click LicenseUpdate.exe to install your license.
To confirm that the license has been installed, run AliasStudio. If your license has been installed, the AliasStudio software starts up and no further action is required.
Obtaining your licenses from the LicenseUpdate.exe
If you are an existing Alias customer and your licenses were not installed by double-clicking LicenseUpdate.exe, you may be able obtain and install your licenses from Webkey on the Autodesk Web site.
Getting the Webkey using the Alias Product Configuration Wizard.
1 Start Autodesk AliasStudio. If you have not licensed Autodesk AliasStudio, the Product Configuration Wizard appears. If the Product Configuration Wizard does not appear, you can launch it from your Windows Start menu by selecting Programs > Autodesk > AliasStudio 2008 > Licensing.
2 In the Product Configuration Wizard, click All Tasks.
39Licensing Windows
Your software may already be licensed
3 Select Download license upgrades for Autodesk AliasStudio 2008.
4 Click Next.
5 You may be asked to identify a Web browser. Once you have chosen a Web browser, click Next.
6 A Web browser window opens, displaying the Autodesk AliasStudio Webkey web page. Instructions on this Web page describe how to download and install the Webkey file.Alternatively, you can browse to the following URL in your Web browser to obtain the Webkey file:www.alias.com/products/studiotools/webkeys/
If your license is not found
There may be cases where your license was not included in the LicenseUpdate.exe or Webkey file. In this case, the Product Configuration Wizard appears when you attempt to launch Autodesk AliasStudio and you need to obtain a license to proceed.
To obtain licenses if you are an Autodesk AliasStudio Platinum membership customer:
1 Log on to your Platinum members site at www.autodesk.com/aicm/ and go to the Alias Insider Case Management (AICM) pages. You must have a “super user” profile to access your license entitlements. (For details on how to use the case management pages, see the FAQs on the Alias Platinum members web site.)
2 If you can’t find your license online, you will need to submit a SPAR form to get a license. Go to www.alias.com/spar.
3 After you obtain the license, go to the following topic to activate your software:Activating the software from a license (page 44).
40Licensing WindowsYour software may already be licensed
Activating the software from a serial number
Use these instructions if:
You only have a serial number and...
● You are a new customer installing AliasStudio for the first time.
● You are upgrading AliasStudio to a new version, and do not have a Platinum membership.
● You are relocating AliasStudio to a different computer.
● You are setting up a floating license server on a Windows machine where you want the software installed on the server machine.
Do not use these instructions if:
● You already have a license. Go to Activating the software from a license (page 44).
● You are an Autodesk AliasStudio Platinum member who may already have a license available through LicenseUpdate.exe. Go to Your software may already be licensed (page 39).
● You are setting up a floating license server and do not want the Alias software installed on it, or you want to set up a floating license server using operating systems other than Windows. Go to Setting up floating servers without installing the software (page 46)
After you install your copy of the AliasStudio software, you need to obtain a license to activate the software.
The easiest and fastest way to get a license is to use the Internet.
What if my machine can’t browse outside to the Internet?
If no computer in your organization has access to the Internet, follow the Product Configuration Wizard until (fax phone email) is requested; you will need to request your license by email.
If you can access the Internet from some machine in your organization (but not the machine you’re licensing):
41Licensing Windows
Activating the software from a serial number
1 On the computer that is being licensed, follow the Product Configuration Wizard until you are asked how you want the data sent to you. Request the one of the phone, fax, and email options. You will be provided with all the data you need to license the computer (hardware ID, serial number, and so on). Record or print this data.
2 On another computer that is connected to the Internet, go to the following URL: www.autodesk.com/opa
3 Enter the serial number, hardware ID, and other information you recorded for the computer you want to obtain a license for. Once the license is returned, install it on the computer you want to license.
Where is my serial number?
New customers will receive a serial number in one of the following ways:
● emailed or otherwise sent directly from the reseller where you obtained your copy of the software
● emailed directly from Autodesk.
● on the outside of your software package (available from selected resellers)
What do serial numbers look like?
Here is a sample of what a serial number might look like:
STF030-B-3322-0933-7182-1111-0000
or
123-12345678
What if I don’t have a serial number?
If you did not receive a serial number, contact your local Autodesk sales office or your reseller to obtain one.
The following instructions tell you how to use your serial number and hardware ID to obtain license data from Autodesk. The instructions then tell you how to use the license data to create a license file that can be used to run the software.
42Licensing WindowsActivating the software from a serial number
Activate your software1 Install AliasStudio, if you haven’t already.
2 From the Start menu, choose Programs > Autodesk > AliasStudio 2008 > Licensing.
3 The Product Configuration Wizard opens, and guides you through the process of activating your serial number or installing your license.
What if I closed the licensing program?
If you closed the Product Configuration Wizard while you were working on the Internet in the previous step, go to the Windows Start menu and select Programs > Autodesk > AliasStudio 2008 > Licensing. Select I have a license that I need to install from the list of entries and proceed to install your license.
Next steps (if the licensing is successful)
● If you are a node-locked (single machine) user, your software is now activated and ready to use. From the Start menu, choose Programs > Autodesk > AliasStudio 2008 > AliasStudio 2008.
● If you are setting up a floating server and a network of clients, go to the following topic:Setting up floating servers without installing the software (page 46)
If the licensing is not successful
If the license installation is not successful, the Product Configuration window reports "Installation Incomplete."
1 Click the Show Installation Log button to read a log to find out what went wrong.
2 Go to the Licensing troubleshooting (page 65) in the Troubleshooting section for more details on what to look for.
43Licensing Windows
Activating the software from a serial number
Activating the software from a license
Use these instructions if:
● You have already obtained a node-locked license from Autodesk and need to install it to activate your software.
● You already have a floating license, you are setting up a license server on a Windows XP or Windows 2000 machine, and you want the Autodesk AliasStudio software installed on the same machine.
Do not use these instructions if:
● You have a serial number but have not yet received a license. Go to the topic, Activating the software from a serial number (page 41).
● You are setting up a floating license server and do not want the software installed on the license server machine, or you want to set up a floating license server on a machine not running Windows XP or Windows 2000.Go to Setting up floating servers without installing the software (page 46)
If you have obtained license data from Autodesk, you can use the Product Configuration Wizard to automatically create the license file that is required to use the software.
A license file is created from the license data provided to you by Autodesk. This data may have been provided to you in an email, a license file, a fax or even read to you over the phone.
License files typically have the following names and locations:
● For node-locked (single) licenses, C:\FlexLM\aw.dat
● For floating licenses, C:\FlexLM\aw_servername.dat (where servername is the name of the license server.
What do licenses look like?
Node locked licenses look similar to the following sample:
FEATURE Studio sgiawd 2008 09-may-2007 uncounted 7CD390F11000 HOSTID=123456789012
Floating licenses look similar to the following sample:
44Licensing WindowsActivating the software from a license
SERVER pc-server 123456789012 7111VENDOR sgiawdFEATURE Studiof sgiawd 2008 10-may-2007\ 1 FC29A6FBF000
Install a license1 From the Windows Start menu, select Programs >
Autodesk > Autodesk AliasStudio 2008 > Licensing.
2 The Product Configuration Wizard window opens. Select I have a license that I need to install and follow the instructions.
Next steps (if the licensing is successful)
● If you are a node-locked (single machine) user, your software is now activated and you can use it. From the Start menu, choose Programs > Alias > AliasStudio 2008 > AliasStudio 2008.
● If you are setting up a floating server and a network of clients, go to the following topic:Setting up floating servers without installing the software (page 46)
If the licensing is not successful
If the license installation is not successful, the Product Configuration Wizard window reports "Installation Incomplete."
1 Click the Show Installation Log button to read a log to find out what went wrong.
2 Go to Licensing troubleshooting (page 65) in the Troubleshooting section for more details on what to look for.
45Licensing Windows
Activating the software from a license
Setting up floating servers without installing the software
Use these instructions if:
● You are setting up a floating license server and do not want to run the AliasStudio software on it.
● You want to set up a floating license server running on operating systems other than Windows.
Do not use these instructions if:
● You have a node-locked (single) license.
● You intend on using a Windows machine as a floating license server. In this case, you must install the Autodesk AliasStudio software. Go to Activating the software from a serial number (page 41) or Activating the software from a license (page 44).
● You intend on using a Windows machine as a floating license server and as a working machine. Go to Activating the software from a serial number (page 41) or Activating the software from a license (page 44).
In some cases, you may want to set up a floating license server on platforms other than Windows. Or, you may want to set up a dedicated license server on Windows machines without installing the Autodesk AliasStudio software.
In these cases, you cannot use the Product Configuration Wizard for license installation. If you are setting up a server on a platform other than Windows, you must download the appropriate license tool software from the Autodesk website.
To set up the license software1 Go to www.autodesk.com/licensetools (You may have to
register for this free service.)
2 From the Web site, open the installation instructions for the server machine’s operating system. From these instructions, find out how to locate the hardware ID for the server machine. Copy or write down this hardware ID.
3 Download and install the license tool software on the server machine, if required.
46Licensing WindowsSetting up floating servers without installing the software
4 Submit your license request at www.autodesk.com/opa/. To submit your license request, you need to provide the serial number for the floating license you purchased, along with the hardware ID for the machine that will be the floating server.
5 Follow the installation instructions you downloaded to set up and configure the server and its clients.
If you do not have Internet access:
If you do not have Internet access, you need to phone in or fax a SPAR form with the hardware ID for your server machine. Contact your Alias representative for details.
Set up the client computers
Client computers must have AliasStudio installed and must have a client license file that points to the license server.
These steps aren’t necessary for the server...
You can already run AliasStudio locally on the license server computer using its existing aw_servername.dat file, so you don’t need to do the following steps for the server.
To set up the client computer:
1 Install AliasStudio on every client computer you are going to set up.
2 On the server machine, make a copy of its server license file, located at C:/FLEXLM/aw_servername.dat. Place the copy at another location (for example, your desktop) and rename it aw_clientname.dat.
Note Only the original file, aw_servername.dat, should remain in the server’s FLEXLM folder.
Tip Make sure that Hide known File Extensions is not checked as one of your View options for this folder, or the file may be called aw_clientname.dat.txt but you will only see it as aw_clientname.dat.
aw_clientname.dat.txt will not work as a license file. (You will have to rename it to aw_clientname.dat.)
47Licensing Windows
Setting up floating servers without installing the software
3 Edit the file you copied in a text editor (for example, Notepad).
4 Keep the lines beginning with “SERVER” and “VENDOR”.
5 Remove all the rest of the lines in the file.
6 Add a line reading, “USE_SERVER”.
Example ..
The original file might look like the following:
SERVER PC-GAIA 123456789012 7111VENDOR sgiawdFEATURE Studiof SGIAWD 2008 3-may-2007\ 4 000000000000
The edited file should look like the following:
SERVER PC-GAIA 123456789012 7111VENDOR sgiawdUSE_SERVER
7 Save the aw_clientname.dat file and copy it to the C:\FLEXLM folder on all client machines. Rename the file on each client to reflect the client’s machine name (but leave the contents of the file the same on all client machines).
8 Verify that you can launch the software on each client machine by selecting Start > Programs > Autodesk > AliasStudio 2008.
48Licensing WindowsSetting up floating servers without installing the software
Starting AliasStudioLearn how to verify that AliasStudio is installed and licensed correctly.
49
Running AliasStudio
You have installed the software and installed the license(s), if required. Now you can confirm your work by starting AliasStudio.
To start AliasStudio
1 From the Windows Start menu, choose Programs > Autodesk > AliasStudio 2008 > AliasStudio 2008 or double-click the shortcut icon on your desktop.
2 If you have a node-locked license, the AliasStudio main window should appear, ready for use. If there is a problem with your license or if more than one product is available, the Application Launcher appears.
3 Click a product that shows an available license beside it. The Set Default option appears.
4 You can click Set Default to set the chosen product as the default product. When you start AliasStudio again, the default product starts and the Application Launcher does not appear.
5 Click Launch. The chosen product should start. If the main AliasStudio window appears, AliasStudio is installed.
6 If an error message appears instead or if the Application Launcher indicates that no licenses are available, refer to the troubleshooting section (see Troubleshooting).
50Starting AliasStudioRunning AliasStudio
Setup new user accounts and working directories
For first time users of AliasStudio the user account and directories are automatically created after answering YES to the following questions:
● A user_data directory does not exist... Do you want one to be created for you? YES
● You do not have a UserPrefs Directory. You may not run without it. Do you want one to be created for you? YES
● The following demo directory does not exist. Creating the project OK? YES.
Note ALIAS_WORKENV can override the default location of C:\Documents and Settings\“USER_NAME”\Application Data\Alias\AliasStudio. For further information on environment variables and how to set them, see the Environment Variables help, available from the Technical section of the main documentation help page.
51
Optimizing AliasStudio performance
You can adjust some AliasStudio or Windows options to fine-tune interface performance.
Windows Control Panel
To improve interactive displays
1 From the Windows Start menu, choose Settings > Control Panel. The Control Panel window opens.
2 Double-click Display to open the Display Properties window.
3 Click the tab named for your graphics card.
4 Select the highest frame-to-frame refresh speed. This option varies by manufacturer and may not be available on your machine.If you have the option Synchronize Buffer Swap to Vertical Sync, turn it off.If you have the option Higher Frame Rate Performance (Do not sync to screen refresh), turn it on.In some cases, setting the option makes little difference in speed and worsens the display of moving objects or causes the display to flicker. If this occurs, turn off the option.
5 In the Display Properties window, click Appearance > Effects.
6 Turn off Show window contents while dragging.Now when you drag a window, it appears as an outline.
52Starting AliasStudioOptimizing AliasStudio performance
Modifying the AliasStudio installationLearn how to add or remove AliasStudio components, reinstall/repair the AliasStudio software, or remove/uninstall AliasStudio.
53
Adding or removing AliasStudio components
Modify the installed AliasStudio software to:
● add more components to the installed AliasStudio software
● reinstall/repair the AliasStudio software
● remove installed components from AliasStudio.
To modify the AliasStudio installation
1 Insert the AliasStudio installation CD into the drive.
2 From the Windows Control Panel, double-click Add/Remove Programs.
3 Click AliasStudio 2008, and click the Change button.The InstallShield Wizard Setup Maintenance window appears.
4 Click Next. You are prompted to select whether you want to Modify, Repair, or Remove the application. Click the round button beside Modify.
5 Click the + button to open the list of components. Click the components that you want to add or remove, then click Next.
6 The Setup Status window appears. This window displays the progress of the modify operation.The Setup Status window may pause at 100% for a few minutes. Do not be alarmed and do not click Cancel. Due to the size of the software, the modification may take a few more minutes.
7 When the modification is complete, the Maintenance Complete window appears.
8 Click Finish to exit from the InstallShield Wizard.
54Modifying the AliasStudio installationAdding or removing AliasStudio components
Reinstalling (repairing) AliasStudio software
You can reinstall all AliasStudio components without first uninstalling AliasStudio.
To reinstall AliasStudio
1 Insert the AliasStudio installation CD into the drive.
2 From the Windows Control Panel, double-click Add/Remove Programs.
3 Click AliasStudio 2008, and click the Change button.The InstallShield Wizard Setup Maintenance window appears.
4 Click Next. You are prompted to select whether you want to Modify, Repair, or Remove the application. Click the round button beside Repair and then click Next.
5 The InstallShield Wizard examines the installed program: this may take a couple of minutes. You will then be prompted to
Click Install to begin the installation.
Click the Install button.
6 After repairing the application, you will be prompted:The InstallShield Wizard has successfully installed AliasStudio 2008. Click Finish to exit the wizard.
Click Finish to exit from the InstallShield Wizard.
55Modifying the AliasStudio installation
Reinstalling (repairing) AliasStudio software
Removing (uninstalling) AliasStudio software
To uninstall all of the installed AliasStudio 2008 products and components, follow the process below. To see the version number of the currently installed AliasStudio software, choose Help > About AliasStudio from the AliasStudio main menu bar.
Uninstalling AliasStudio removes the AliasStudio directory and its subdirectories, and possibly the Com directory and its subdirectories if they are not used by other products. It also removes AliasStudio keys and values from the Windows Registry.
The uninstall program also tells you which AliasStudio files or directories it cannot remove. It does not remove any user’s home AliasStudio directory (or subdirectories) or other user-created files. For example, uninstalling does not remove any directories or files at or below C:\Documents and Settings\“USER_NAME”\Application Data\Alias\AliasStudio. These directories are not removed because it is likely that the user wants to keep many of the files.
The uninstall program lets you view files that it cannot delete. You can delete them manually by dragging them to the Recycle Bin.
To remove (uninstall) AliasStudio
1 Choose Start menu > Settings > Control Panel > Add/Remove Programs utility.
2 Choose AliasStudio 2008.
3 Click Remove. A Confirm File Deletion windows appears asking you if you want to completely remove the Studio software and all its components. Choose YES.
The Setup Status window may pause at 100% for a few minutes. Do not be alarmed and do not click Cancel. Due to the size of the software, removing it may take a few more minutes.
Note Add/Remove Programs cannot remove the online documentation files.You will need to manually delete these files and directories.
56Modifying the AliasStudio installationRemoving (uninstalling) AliasStudio software
TroubleshootingLearn debugging techniques to resolve common problems when installing AliasStudio software and licenses.
57
Online help and support information
PDF help manuals
Your AliasStudio CD-ROM contains Adobe Acrobat PDF files of the manuals. The Installation Guide can be found at the top level of the software CD-ROM:
install.pdf
Additional resources
● For information about AliasStudio issues, see the Web site: www.autodesk.com then click the Support tab and choose the product Autodesk AliasStudio from the scroll list of supported products.
● For the latest hardware qualification charts, see www.autodesk.com/qual-charts.
● For information about various Windows issues, see the Web site www.microsoft.com
● For information about licensing and hardware locks, see the Web site www.macrovision.com
● For details on installation and performance issues, check the Web site of your graphics card manufacturer.
● Bookstores provide an array of helpful books on Windows for various types of users and administrators.
Autodesk Global Support Services
Go to www.autodesk.com and click on the links to Support > Autodesk AliasStudio. The Autodesk Support organization provides you with prompt and professional technical support when you need it.
How to contact Global Support Services
If you still cannot resolve the problem, contact Autodesk Technical Support.
Important: To receive support from Autodesk Technical Support you must have a valid Platinum Membership Contract and Customer Location Code.
58TroubleshootingOnline help and support information
NORTH AMERICAN SUPPORT CENTER
The North American Support Center provides support for different geographic areas.Americas
Areas covered Hours of Availability
United States, Canada, Central and South America. Weekdays: 3 AM - 10 PM EST Weekends: 6 AM - 6 PM EST
Area Contact Number
U.S.A. and Canada, Toll-free 1-877-927-7478Platinum members login on the technical support website for additional options.
Elsewhere in the Americas 1-416-362-8670
Europe, The Middle East, Africa, Australia and New Zealand.The North American Support Center also supports Europe, The Middle East, Africa, Australia and New Zealand.
Areas covered Hours of Availability
Europe, The Middle East, Africa, Australia and New Zealand.
Weekdays: 9 AM - 4 AM CET,Weekends: 12 PM - 12 AM CET
Area Contact Number
France, Toll-free 00 800 8708 7087
Italy, Toll-free 00 800 8708 7087
United Kingdom, Toll-free 00 800 8708 7087
Germany, Toll-free 00 800 8708 7087
All other countries, toll-free ++/ 800 8708 7087
Australia, Toll-free 00 11 800 8708 7087
New Zealand, Toll-free 00 800 8708 7087
Platinum Options platinum members login for additional options.
59Troubleshooting
Online help and support information
ASIA PACIFIC SUPPORT CENTER
Please contact your local reseller for support.
Country/Company Products Supported Telephone
Bangladesh
Hong Kong and China
Jadason Technology Ltd. All Products 852-2310-8989
India
Tata Elxsi All Products 91 80 8411464
Rahul Commerce Maya 91 20 4016246
Indonesia
PT Mitra BisInfo Utama All Products 62-21-351-6588
PT Parametrik Nusantara StudioTools 61 21 5606054
Japan
Sumisho Electronics Co., Ltd. All Products 81-3-5217-5230
NGC Corporation All Products 81-3-5423-5535
Software Too Corporation Maya 81-3-5676-2197
Born Digital, Inc. Maya 81-3-3257-0866
Silicon Studio Corporation. Maya 81-3-5488-7423
I-Design All Products 81-3-5413-6337
Malaysia
Caveman IT Services Sdn Bhd Maya 603-780-8809
Caddcam Technology Sdn Bhd StudioTools 603-56214316
Philippines
Sandz Distribution Philippines., Inc. All Products 632-888-5757
Challenge Systems Inc. Maya 63 2 892 3779
60TroubleshootingOnline help and support information
What information is helpful to send to Global Support Services
Before calling for Customer Support save examples of the following:
1 Gather your system information:◆ Choose Start > Run, type winmsd, and press Enter to
open the System Information window.◆ Click on the System Summary to view information
about your version and memory.◆ Click on Components and then Display to view
information about your monitor.◆ Click on Storage and then Drives, SCSI to view
information about your disk space available.◆ Save the contents of the above pages. ◆ To save on Windows 2000, for each page choose
Action > Save as text file.
Singapore
Sandz Distribution Private Ltd Maya 65-6741-1535
Sun Tze Communications Engineering Pte Ltd.
StudioTools 65-6846-8826
South Korea
Shinsegae I & C, Inc. All products for commercial use 82-2-2193-1234
M-One Tech, Inc. All products for educational use 82-2-508-5188
Thirdeye, Inc. All products for design customers 82-2-3413-1610
CG Wave Inc. Maya 82-2-55-6495
Rexsoft Maya 82-2-707-8301
Taiwan
Origo Company Limited All Products 886-2-87681688 ext 6931
Thailand
Comgraph Co., Ltd. All Products 662-267-8132
61Troubleshooting
Online help and support information
◆ To save on Windows XP Professional, choose File > Export > text file.
2 Screen captures of error messages
● Click on the button on the keyboard called Print Screen/SysRq
launch the application called Paint◆ Start>Programs>Accessories>Paint ◆ choose the Edit>Paste
Refer to www.autodesk.com/qual-charts to confirm if your graphic card is qualified.
62TroubleshootingOnline help and support information
Installation troubleshooting
Brief description Question Solution
Exit prematurely Q. What happens if I exit from the installation program prematurely?
A. If you installed a prior version of AliasStudio, exiting from the installation program returns AliasStudio to the state it was in before you started the installation program. If you are installing AliasStudio for the first time, exiting from the installation program leaves your system in the state it was in before you began installation.
Hardware lock Q. Can I move the hardware lock to another computer?
A. Yes. To move the lock from one node-locked computer to another, attach the lock and install AliasStudio on the other computer, then copy the previous computer’s aw.dat file to the new computer. To move a lock from one floating license server to another, attach the lock to the new computer and do the installation and licensing procedure over.
If the hardware lock does not appear in the list of hardware IDs, check the following:
• Ensure the device is properly connected to your computer.
• If you are running Windows XP Service Pack 2, in certain cases you will not be able to install the HASP device drivers that support the new USB hardware locks (USB dongles). If you encounter this problem we suggest that you download and install the latest HASP4 drivers directly from the Aladdin support pages at www.aladdin.com/support/hasp/hasp4/enduser.asp. It is recommended that you use the Command Line Installation method to ensure proper installation of the HASP4 driver.
63Troubleshooting
Installation troubleshooting
If your hardware lock suddenly won’t work...
Ensure you install the driver (Sentinel® for parallel port, HASP for USB port) for your hardware lock when you install Autodesk AliasStudio.
If you accidentally remove this driver, the hardware lock won’t work and you will need to reinstall the driver using the installer provided on the AliasStudio CD.
To install the Sentinel driver:
1 Restart your computer and log on as Administrator.
2 Insert the AliasStudio 2008 installation disk into the CD-ROM.
3 Navigate to the CD and find the Sentinel folder.
4 Double-click on D:\Sentinel\flexid.exe.
5 A Rainbow Technologies window appears.
6 Select Functions > Install Sentinel Driver.
7 Select OK.
8 Restart your computer.
Uninstall Q. Can I manually uninstall AliasStudio for Windows?
A. No. Use the Windows Control Panel to Add/Remove Programs.
Windows Registry Q. Does AliasStudio for Windows affect the Windows Registry?
A. Yes. Some configuration data is stored in the Registry; for example, the top-level folder of the AliasStudio installation.
Brief description Question Solution
64TroubleshootingInstallation troubleshooting
Licensing troubleshooting
Brief description Question Solution
Run two copies of AliasStudio
Q. Can I run two copies of AliasStudio at the same time on the same machine?
A. Yes. If your computer gets its AliasStudio license from a license server, it uses only one license even if you run multiple copies of AliasStudio for Windows on the same machine.
Kill AliasStudio Q. How do I kill the AliasStudio program when I can’t exit?
A. The Windows Task Manager lets you kill a task that for some reason no longer responds to your commands. To display the Task Manager, press the Ctrl-Shift-Esc keys. If possible, do not quit AliasStudio in this way, because you are likely to lose some of your work. Instead, click File > Exit.
Version info Q. How do I find out which version of AliasStudio I have?
A. In AliasStudio, click Help > About StudioTools; or on your desktop, right-click on the icon and choose Properties.
Start time Q. How long does it take AliasStudio for Windows to start?
A. This depends on the speed of your computer. In any case, AliasStudio for Windows should start within ten seconds.
Operating Systems
Q. Can I run AliasStudio for Windows on Windows 95 or Windows 98?
A. No. You must use Windows XP or Windows 2000 Professional.
Error messages Q. What do I do if I see errors when I try to start AliasStudio?
A. See troubleshooting license problems.
Hardware lock Q. What do I do if I lose the hardware lock?
A. You must buy a new lock from Autodesk. Consider buying insurance for your lock as you would for any valuable business property.
65Troubleshooting
Licensing troubleshooting
Hardware lock Q. What do I do if the hardware lock falls off or is removed while AliasStudio is running?
A. Reconnect it immediately after disconnection and AliasStudio operation should continue undisturbed. If the lock is off for more than five minutes, AliasStudio quits and displays:Lost connection to dongle or License manager, exiting.... Your work has been saved to the file lostlock. Look for a file called _m.saved or _checkpoint.saved. For a node-locked license, reattach the lock, restart the computer, and start AliasStudio again. For a floating license, reattach the lock to the license server computer, use FLEXlm License Manager to stop and start the license server software, then have all users on the network start AliasStudio again.
Brief description Question Solution
66TroubleshootingLicensing troubleshooting
Network license problems
Q: When a Windows 2000 machine is not connected to a network (or a laptop undocked), the operating system tries to unload the TCP/IP protocol. Why?This is useful to disable network login dialog boxes, unfortunately, it also disables the network card which your license is based.For this condition to exist, you must have: • Node-locked license to the
network interface card (NIC) - Machine does not have a physical connection to a network
• TCP/IP protocol installed and (or tries to) bound to card
• A red “X” over a network card icon in your system tray
Under Windows 2000
1 Log in as a user with Administrator privileges
2 Insert the Windows 2000 system disk
3 Click on Start > Settings > Control Panel.
4 Double-click on the Network and Dial-up Connections icon
5 Right-click on the Local Area Connection icon and then click on the Properties option.
● If at this point you see the NWLink IPX/SPX/NetBIOS Compatible Transport in the list of protocols without a check in the box beside it, you have it installed but it has been disabled. Click inside the box to enable it and re-start Windows
6 Click Install > Protocol > Add.
7 Choose NWLink IPX/SPX/NetBIOS Compatible Transport and click OK. Re-start the machine to be able to use the protocol.
Brief description Question Solution
67Troubleshooting
Licensing troubleshooting
Under Windows XP Professional
1 Log in as a user with Administrator privileges.
2 Open the Control Panel from the Start menu.
3 Click the Network and Internet Options and then click Network Connections (you may have Network Connections visible directly from the Control Panel depending on how your options are set).
4 Right-click Local Area Connection and then click Properties.
5 Click the Install... button.
6 Highlight the Protocol option and then click Add...
7 Hightlight NWLink IPX/SPX/NetBIOS compatible transport protocol and then click OK.
8 Ensure that the NWLink IPX/SPX/NetBIOS protocol is now in the list of protocols and then close the window.
9 Re-start your computer.
10 After re-starting Windows, launch lmtools (located in the C:\Program Files\Common Files\Alias Shared\Licensing\bin directory), click on the System Settings tab and confirm that you have a valid ethernet address.
Brief description Question Solution
68TroubleshootingLicensing troubleshooting
Pathnames Q. How do I specify pathnames? A. Windows does not distinguish between uppercase and lowercase letters in file and directory names. It also uses back slashes (\) as path separators.However, in many cases AliasStudio for Windows allows forward slashes and translates them for Windows.
Brief description Question Solution
69Troubleshooting
Licensing troubleshooting
Advanced license troubleshooting
To investigate license errors
If you think that you have already installed a valid license, but continue to receive
No valid license found
or the system can’t find aw.dat or aw_servername.dat, try these steps:
1 Restart the license server or node-locked machine, in case you didn’t do it after you installed AliasStudio.
2 If you tried to run AliasStudio on a client or server, make sure that the time and date on the client and server are synchronized.
3 Review the licensing procedure to make sure that you completed all the steps.
4 Do the steps in Example of a license log file (page 71).
5 Do the steps in To check license errors with lmtools (page 76).
6 Verify that the directory C:\FLEXlm\ contains the file aw.dat or aw_servername.dat.If this file doesn’t exist, re-install licences as described in Activating the software from a license (page 44)Do the steps in To check license errors with lmtools (page 76).
To investigate further: errors for floating licenses
If you are running a floating license, try these additional steps:
1 Stop and start the license server software as described in To set up your floating license server... (page 35).
2 Do the steps in To check license errors with lmtools (page 76).
3 Restart the license server computer.
To investigate further: errors for hardware locks
If you are using a hardware lock, try these additional steps:
70TroubleshootingAdvanced license troubleshooting
1 Restart the computer where the lock is plugged in.
2 Make sure you attached the hardware lock correctly. See Setting system hardware properties (page 18) for installation details.
3 On a node-locked computer or license server computer, make sure that the parallel port works. If you can print from the port, it is working.
4 Do the steps in To investigate further: errors for hardware locks (page 70)
Example of a license log file
If you still have trouble with licensing, you can create a licensing log file to learn more about the error:
● For a node-locked license, do these steps on the computer where the error message appears.
● For a floating license, do them on the license server machine.
To examine the license error log file:
1 From the Windows Start menu, choose Programs > Command Prompt.
2 At the command prompt, enter:set FLEXLM_DIAGNOSTICS=2
3 Try to start AliasStudio by typing:Alias.exe
Because you set the environment variable FLEXLM_DIAGNOSTICS, the attempt to start AliasStudio creates a licensing log file that you can open and examine.
4 To list the files in the current directory a page at a time, enter:dir /p
The licensing log file is named flexnumber.log file, where number is the process identification number defined by the operating system. If more than one flexnumber.log file is present, choose the file with the latest time stamp.
71Troubleshooting
Advanced license troubleshooting
5 To launch the Notepad text editor and display the contents of the specified log file, enter:notepad flexnumber.log
The log file reports each license failure for all AliasStudio products, so it can be quite long. For each product (whether available to you or not), an error message is logged beginning as follows:FLEXlm checkout error:
6 Find the error message for the license that you are investigating and see Understanding log file error messages (page 73). Ignore other information in the file. If the message isn’t listed, call our Support Services department.
7 Exit from Notepad.
8 After you no longer need the licensing log file, you can delete it by entering:del flexnumber.log
where number is the number of the file.
9 Close the Command Prompt window.
72TroubleshootingAdvanced license troubleshooting
Understanding log file error messages
When you create a licensing log file as described in the previous section, you can browse the file to find error messages to help you identify a problem.
The most common error messages are explained below. If multiple errors exist, only the first one found is listed in the log file. In these explanations, the term license file refers to the aw.dat file for node-locked licenses or aw_servername.dat (on the server) for floating licenses.
Error Possible solutions
FLEXLM checkout error: Invalid (inconsistent) license key. The license key and data for the feature do not match. This usually happens when a license file has been altered.
• Check the license file against the license file that you received. There may be a typing mistake in the password, expiration date, or license version. If it is a floating license, check to see if the HOSTID is spelled correctly.
• If you obtained a pre-release license for AliasStudio, also check the spelling of eval in the VENDOR_STRING.
FLEXLM checkout error: Feature has expired...
• Either the current machine date is later than the expiration date or there’s a typing mistake in the expiration date.
FLEXLM checkout error: Invalid date format in license file
• Check the license file’s expiration date for an incorrect format, for example, may-4-2006. The correct format is 4-may-2006.
• The license count digit may be absent: uncounted for node-locked, a number greater than 0 for floating.
FLEXLM checkout error: Invalid License File syntax.
• Check the license file against the license file that you received. There may be a typing mistake.
FLEXLM checkout error: No such feature exists.
• Check the license file’s spelling of components, package, and feature lines against the license file that you received.
73Troubleshooting
Understanding log file error messages
FLEXLM checkout error: Future license file format or misspelling in license file.
• Make sure you have the newest version of FLEXlm license server (AliasStudio 2008 requires version 10.8).
• Check the license file’s spelling of VENDOR or any part of the string HOSTID number.
• Check that you typed \ instead of / at the end of a line.
FLEXLM checkout error: No SERVER lines in license file.
• For a node-locked license, check that the license file’s License Count is uncounted.
• For a floating license, make sure the appropriate SERVER and VENDOR/DAEMON lines appear at the top of the aw_servername.dat file (in the license file, the value of servername has to be replaced with the machine name).
FLEXLM checkout error: AliasStudio license in file appears to be corrupted.
• Check the entire license file for a typing mistake.
FLEXLM checkout error: Invalid host.
or
The hostid of this system does not match the hostid specified in the license file.
• Check that the machine possesses the right hardware ID/HOSTID number, and that it is correct and not misspelled. To check the hardware ID of the current machine.
• Check that the hardware lock (dongle) is plugged into the parallel port or USB port correctly.
FLEXLM checkout error: No server for this feature.
• sgiawd in DAEMON (Linux) or VENDOR (Windows) line may be spelled incorrectly.
FLEXLM checkout error: License server does not support this feature.
• Check the license file to see if the feature has expired, the license server has not yet started.
• Check if there is a mismatch between the version of AliasStudio and the version of AliasStudio identified in the license file.
• Try using the computer’s IP address instead of the hostname.
• Make sure the USE_SERVER lines on the client machine are in the right order.
74TroubleshootingUnderstanding log file error messages
FLEXLM checkout error: Cannot connect to license server.
• FLEXlm floating license software has not been installed or an older version of FLEXlm floating license software is installed. AliasStudio 2008 uses FLEXlm version 10.8.
• The license server daemon has not been started.
• SERVER servername has not been changed to reflect the name or IP address of the server.
• DAEMON or VENDOR is not spelled correctly.• (Linux) The sgiawd path is not right. The
default should be: /usr/aw/COM/etc/sgiawd
• Check the network connection on your client machine.
• Check that the sgiawd path is right. The default should be C:\Program Files\Common Files\Alias Shared\Licensing\etc\ (where C: is the drive where AliasStudio is installed).
• As a last resort, reboot your license server.
FLEXLM checkout error: Clock difference too large between client and server.
Make sure the time and date on the client and server are correct and synchronized. If the time and date of the client differs from the server by more than a half hour, the client may not be able to get a license.
75Troubleshooting
Understanding log file error messages
Licensing diagnostic tools
To check your system configuration with winmsd
Windows Diagnostics panel providing system configuration information. To run this program see Choose Start > Run, type winmsd, and press Enter to open the System Information window. (page 61)
To check license errors with lmtools
Licensing sometimes fails because your licensing software is using the wrong Flex ID / host ID (or server host ID). To verify that this is the case, you can use the lmtools program.
For floating licenses only, you can also use the lmtools program to check for errors not listed in Understanding log file error messages (page 73).
1 Open the Com\bin directory. By default, the directory is at C:\Program Files\Common Files\Alias Shared\Licensing\bin or Start > Programs > Alias > Common Utilities > FlexLM Licensing Utilities (if AliasStudio is installed on drive C).
2 Double-click lmtools.exe.
3 Choose Configuration using services. Your license server should appear in the box below this field.
Note If the license file is not in the default location, specify where it is. Choose the Configure Services tab, enter the license path under Path to the license file field, and then choose Save Service.
On some Windows 2000 systems lmtools.exe and lmutil.exe may fail to retrieve the ethernet HOSTID, returning a value of ffffffff and causing pre-
76TroubleshootingLicensing diagnostic tools
keying to fail. Obtain the Physical Address of your system by running the ipconfig /all command from the Command Prompt window.
Convert the Physical Address to an Ethernet Address by removing the dashes and converting all letters to lowercase.
For example, a Physical Address of 00-C0-4F-8E-F6-C6 becomes an Ethernet Address of 00c04f8ef6c6.
Contact Autodesk Sales Support, request a license, and provide them with the Ethernet Address.
4 Look under the System Settings tab to find out which host IDs are used by your system.Use this table to find out which field to look at, and what to compare it to in the license file. The license file can be found at these default locations:◆ C:\FLEXlm\aw.dat for node-locked licenses◆ C:\FLEXlm\aw_servername.dat for floating licenses(where servername is the name of the license server computer).If the value in the system settings doesn’t match the value in the aw.dat or aw_servername.dat file, either:◆ You typed in the wrong server name in the aw.dat or
aw_servername.dat file (use Notepad to correct the number)
◆ You were supplied with the wrong license information (contact Alias).
77Troubleshooting
Licensing diagnostic tools
To check for additional floating license errors
To customize and view a status report on the floating licenses:
1 Choose Configuration using services.Note If the license file is not the default location, you must
specify where it is. Choose the Configure Services tab, enter the license path under Path to the license file field, and then choose Save Service.
2 Click on the Server Status tab.
3 Click on the Perform Status Enquiry button.It shows whether◆ the license server is up and running ◆ each feature line in aw_servername.dat is free of errors ◆ the license count is correct for each feature Examine these entries in the status information during the following steps:
License server status: 7111@servernameLicense file(s) on servername:
C:\FLEXlm\aw_servername.dat:servername: license server UP (MASTER) v10.8\Vendor daemon status (on servername):sgiawd: UP v10.8
(where servername is the name of the license server computer).
For the security type...
The value in... Should match...
Ethernet the System Setting’s Ethernet Address field
the HOSTID value in the license file, which should look like this:HOSTID=00c04f8ef647
hardware lock the System Setting’s FLEXID7 field; also printed on a sticker on the hardware lock itself
If the FLEXID7 field contains the value “FLEXID=7-0,” the hardware lock is not plugged in to the parallel connector correctly.
the HOSTID / FLEXID value in the license file, which should look like this:HOSTID=FLEXID=7-b2857e57
78TroubleshootingLicensing diagnostic tools
4 In the top line, the number 7111 is a fixed value for the TCP port used internally by the licensing software. If you see a different number, make sure that you intend for that port number to be used. Otherwise, open the file aw_servername.dat and change the number to 7111.
5 In the next line of the status information, check that the correct path to the license file is listed.
Note If you didn’t install the license files in the default location, pay special attention that the path is correct.
6 The next line of the status information shows that the license server is running. If it isn’t, you’ll see an error message that begins like this:
lmgrd not running: Cannot connect to license server.The server (lmgrd) has not been started yet, or the wrong port@host or license file is being used, or the port or hostname in the license file has been changed...
◆ Ensure that you have a valid license file with the correct name.
◆ Keep handy the aw_servername.dat file, the Status information, and any log file error messages you examined previously. Call our Global Support Services department and provide them with this information.
7 Below the status information is a list of features in the aw_servername.dat file and whether the clients can use the features. An example follows:
Feature usage info:Users of Studiof: (Total of 3 licenses available)Users of AutoStudiof: (Total of 3 licenses available)
This example indicates that six licenses are available: three for Studio (floating) and three for AutoStudio (also floating).If aw.dat or aw_servername.dat has a typing error, you’ll see a message similar to this:
79Troubleshooting
Licensing diagnostic tools
Feature usage info:Users of Studiof: (Error: 1 licenses, unsupported by licensed server)Users of AutoStudiof: Total of 1 licenses available)
Check aw.dat or aw_servername.dat for a typing error in the Studiof FEATURE line.
8 If the preceding procedure doesn’t fix the problem, call our Support Services department and keep the information from the preceding two steps nearby.
80TroubleshootingLicensing diagnostic tools
Confirming FLEXid dongle drivers installation (for hardware locks only)
For hardware locks, a FLEXid dongle driver enables communication between a node-locked or license server computer and its USB or parallel port. The USB or parallel port connector is where the hardware lock is attached.
From the initial installation start up window program choose Install Driver for Hardware Lock to install onto your computer. To make sure the driver was installed, do the following on the computer where the hardware lock is attached.
To check FLEXid dongle driver installation:
1 Open the folder where you installed the FLEXid dongle drivers software. By default, this install folder is at C:\Program Files\Macrovision Corporation\Macrovision FLEXid Drivers, where C: is the drive where the software is installed.
2 Verify that the install folder contains the following subfolders: flexid6, flexid7, flexid8, and flexid9.
3 If this is not the case, install the FLEXid dongle drivers as follows.
To install the FLEXid dongle drivers:
1 From the initial AliasStudio software CD installation window choose Install AliasStudio > Install Driver for Hardware Lock, or go to www.aladdin.com to download the latest driver.
2 Restart the computer.
81Troubleshooting
Confirming FLEXid dongle drivers installation (for hardware locks only)
Starting AliasStudio troubleshooting
Application Launcher
Application Launcher problem Possible solutions
You run appLaunch to start the Application Launcher, but AliasStudio starts without showing it.
• If there is only one product available in your license, that product starts. You see the Application Launcher only if more than one AliasStudio product is licensed or if there is a licensing problem.
How do I reset the Applauncher to choose another product that I want to launch?
Run Programs > Autodesk > StudioTools 2008 > Application Launcher and choose the product you want to launch.
When you start AliasStudio, the Application Launcher says that it cannot find a valid license.
• Ensure that a valid license is installed in eitherc:\FLEXlm\aw.dat orc:\FLEXlm\aw_servername.dat
(See Before you begin: checklist (page 22).)• Ensure that the license server is running.• Check your license file for typing errors.• Use the section Advanced license troubleshooting (page 70) to
pinpoint licensing problems.
You can start AliasStudio from the Application Launcher, but get a license error if you try to run the Alias executable directly.
• Delete the ALIAS_LICENSE variable if you understand licensing and don’t want to run any other AliasStudio products. It automatically starts a particular AliasStudio product: st (Studio), as (AutoStudio), ss (SurfaceStudio), or ds (DesignStudio). To disable this variable for Windows:1. From Start > Settings > Control Panel > System, click on the Environment tab. 2. Look for the ALIAS_LICENSE variable. If you see that it is set, delete it by highlighting it and clicking the Delete button.
• Your default product might be no longer available. In that case, choose another product in the Application Launcher, click Set Default, and click Save.
82TroubleshootingStarting AliasStudio troubleshooting
Index
Aadding
components to StudioTools (Windows) 54
administrator privilegesWindows 23
application launchersetting StudioTools (HP-
UX_ 50Windows 50
CCD-ROM
installing to Windows 23client
definition 38installing on Windows 23
colorssetting in Windows 18
configuringof mouse buttons 19
coursewareinstalling 32
Ddefault StudioTools product
HP-UX 50desktop
Windows 18disk space
Windows 13, 17
Eerror messages
licensing log file (Windows) 73
exitingfrom StudioTools 65
FFLEXlm
FLEXLM_DIAGNOSTICS 71floating licenses
activate 44client setup 47definition 37definitions 36errors (Windows) 76, 78overview 35setup with our installing
software 46troubleshooting
(Windows) 70
Ggraphics cards
certified 18displaying properties of
(Windows) 18driver software 13, 18manufacturers 58option settings (Windows) 18set up 18
Hhardware ID (Host ID)
definition 36hardware locks
disconnected 66losing 65more about 58moving to another
computer 63troubleshooting
(Windows) 70host IDs
Windows 77
Iinstallation
confirming 50courseware 32installing components 25setup type window
(Windows) 25starting (Windows) 23uninstalling (Windows) 56
installingchoosing destination
(Windows) 24compact (Windows) 25custom (Windows) 25default location (Windows) 24reinstalling 55renderer-only 25select components
(Windows) 25StudioTools on Windows 23typical (Windows) 25upgrading (Windows) 23
InstallShield Wizardsetup type window 25
installshield wizarddestination location 24
Intellimouse 19interrupting
StudioTools 65
Kkilling
StudioTools application 65
Llicense file
definition 38license management options 48license server installation
type of installation 8
licenseserrors (Windows) 76, 78floating license definition 37install 45log file (Windows) 71node-locked licenses
definition 37Platinum membership 39prekey 40serial number sample 42SPAR URL 40
licensingdefinitions 36overview 35
local installationtype of installation 8
log filelicensing errors (Windows) 71
MMicrosoft
information from 58Intellimouse 19
modifyingStudioTools for Windows 54
mousebutton configuration 19Microsoft 19simulating UNIX 19wheel mouse 19
Nnode-locked licenses
activate 44definition 37definitions 36overview 35
OOnline Product Activation (OPA)
definition 37operating system
Windows version 13, 16, 17, 65
Ppathnames
in Windows systems 69performance
graphics (Windows) 18Windows 52
Platinum membershiplicenses 39
prekeylicenses 40
Product Configuration Wizarddefinition 37
product informationgraphics cards 58hardware locks 58Microsoft 58Web site 58
propertiesWindows desktop 18
QQualification Charts
web site 13, 16, 17
Rregistry
Windows 64removing
components of StudioTools (Windows) 54
StudioTools (Windows) 56renderer-only installation 25resources
about graphics cards 58about hardware locks 58at Microsoft 58
resourcesWeb site 58
Sserial number
activating software 41defined 36sample 42
server
definition 38setting
color in Windows 18setup type window
in installation 25software requirements
Windows 13, 16, 17space requirements
Windows 13, 17SPAR form
web URL 40speed
improving in Windows 52Spider
system requirements 16startup
duration 65StudioTools
default location (Windows) 24default product (HP-UX) 50installing components
(Windows) 25reinstalling on Windows 55removing (Windows) 56repairing 55setting default product (HP-
UX) 50uninstalling (Windows) 56upgrading (Windows) 23version (Windows) 56, 65Windows system
requirements 13StudioViewer
system requirements 17switching computers 63system configuration
how to determine 12
Ttask manager
in Windows 65terminating StudioTools
using Task Manager 65types of installation
license server 8local 8
UUNIX
mouse, simulating in Windows 19upgrading
StudioTools (Windows) 23
Vversion
StudioTools (Windows) 56, 65StudioTools, upgrading (Windows) 23
video resolutionWindows 18
WWeb site 58Windows
default location of StudioTools 24desktop properties 18improving interactive performance 52installing components 25installing StudioTools 23pathnames in 69registry 64reinstalling StudioTools 55renderer-only installation 25select components window 25simulating UNIX mouse 19uninstalling StudioTools 56
XXMouse productivity tool 19