Innovations 2008
-
Upload
erdinc-klima -
Category
Documents
-
view
268 -
download
2
description
Transcript of Innovations 2008
R
Switch to perfection
Rit
tal
Inn
ov
ati
on
s 2
00
8
Rittal – Innovations 2008
All supplements to Rittal Catalogue 32
R
08/0
8 � E
984
Rittal Limited � Braithwell Way � Hellaby Industrial Estate � Hellaby � Rotherham � S Yorks S66 8QYTel.: (01709) 704000 � Fax: (01709) 701217 � www.rittal.co.uk � eMail: [email protected]
nh001_gb_engl.fm Seite 1 Donnerstag, 31. Juli 2008 2:34 14
A world first
MAXIMUM PRODUCT BENEFITS
Wherever you see the words Total Benefit of User-
ship = TBU, you can be sure of maximum product
benefits from Rittal. The buzzword here is system
solutions. Take a holistic approach, rather than focus-
sing on individual solutions. See the whole picture,
in all its complexity, instead of viewing problems in
isolation. Every system solution is expertly coordinat-
ed, with the aim of producing maximum benefits with
minimum input.
Put another way, a Rittal system solution is always
a system benefit, and for you this adds up to
TBU = Total Benefit of Usership.
CONTENTS
TTSmmaoa
Industrial Enclosures from page 10
Power Distribution from page 24
Electronic Packaging from page 30
System Climate Control from page 32
IT Solutions from page 50
Communication Systems from page 76
System accessories from page 84
Technical details from page 100
2
he new thermoelectric cooler he Rittal Peltier cooling unit for command panels. mall in shape, low in weight, and efficient in perfor-ance. Your all-in-one solution . . . a small product with aximum performance. The thermoelectric cooler chieves a higher operating ratio (COP >1 = Coefficient f Performance) and a better refrigeration factor than ny of its peers.
Rittal Innovations 2008
The new Rittal one-piece consoles Sheet steel, design and ergonomics on the outside. Individuality and diversity, functionality and safety on the inside. In short, maximum product perfection, right down to the tiniest detail. As you would expect, these consoles are system-compatible with the interior confi-guration of the Top enclosure system TS 8, which means maximum application flexibility.
Rittal Innovations 2008
The innovative Quickline panel from Rittal Mass-produced individuality. Ease of use in any given situation. A keyboard housing to suit every application. Rittal is 100 % dedicated to innovation. This means staying close to its customers and the market require-ments at all times. Top quality, a balanced price range, and a design that is perfectly tailored to your machinery and plant.
3
MAXIMUM PROCESSING POWER
Processing power – a term that embodies Rittal’s
entire system intelligence. System intelligence that
has become a trademark, in the form of Ri4Power.
Here, TBU stands for maximum benefits in terms of
process reliability. Ri4Power Form 2-4 is at the cut-
ting edge of structured system solutions: Enclosures
plus accessories plus system components for the
safe, fast configuration of low-voltage switchgear for
machines, plant and buildings. An individual concept
for universal use.
The modular system unit for low-voltage switchgear
and distribution enclosures.
4
New: Ri4Power Form 2-4 now up to 4000 AThe intelligent thought structure for an innovative system: Ri4Power Form 2-4. Packed full of maximum processing power and reliability. A glimpse inside the system reveals the solu-tion. The type of internal form separation for power distribution in the Top enclosure system TS 8 is the key. This innovation may sound simple in principle, but it offers a host of benefits for assembly and application.
● The internal separation has been carefully designed to support a high level of function plus simple, safe modi-fication of the switchgear.
● Compatible with switchgear units from all well-known manufacturers.
Rittal Innovations 2008
New: Now up to 30 % less energy input Cool efficiency: The latest generation of Rittal TopTherm cooling units will meet your cooling requirements with up to 30 % less energy input.
● This means maximum efficiency when it comes to conserving natural resources.
● For you, this translates into savings that benefit both the environment and your company.
Rittal Innovations 2008
New: Complete green IT infrastructure from a single source The synergies of Rittal together – Complete IT compe-tence with the three IT companies Rittal, Lampertz and Litcos – have created the ecological data centre of the future. For efficiency in terms of energy, security, availability and synergy. If your company is considering investing in energy-efficient, climate-friendly systems, Rittal is on hand worldwide as a competent point of contact. When it comes to green IT performance, we ensure an optimum “investment climate”.
5
MAXIMUM SERVICE QUALITY
When it comes to maximum service quality, Rittal is
first off the mark. With the largest range of enclosures
available for immediate delivery, Rittal provides one of
the fastest delivery services in the world. This trans-
lates into maximum benefits for you. Wherever you
happen to be in the world, developing and implemen-
ting solutions for yourselves and your customers, we
are close at hand, determined to deliver your order in
the fastest possible time. There’s fast, there’s faster
and then there’s Rittal – with AE Laser Express.
6
Rittal Innovations 2008The new dimension in value-added for Rittal customers: TBU is now a tangible variable. Everything is perfectly clear, from planning, to machining and assembly, through to delivery. An impressive example of fascinating future.
● Project-plan the enclosure in 3D at a click of the mouse. This has been made possible thanks to the unique inter-action between Electric P8, EPLAN Cabinet and RiCAD 3D.
● Rittal controls production and implements machining with the aid of this database.
Rittal Innovations 2008
● Enclosures are also configured with system accessories in accordance with your plans.
● In next to no time, you will receive a complete, perfectly prepared enclosure complete with top-quality produc-tion documentation.
A fascinating way to make your controller production faster, more efficient and even more perfect. The future has arrived. Step into the future with this range of services from Rittal.
7
8
Success does not happen by itself. It is the result of perfect and intelligent inter-
actions, coupled with a focus on decisive synergy effects. This is what makes a
winner. You too can share in the vast benefits of Rittal International, with its unique
spectrum of expertise, and outstanding market achievements in IT and industry.
Be part of this success. Reap the rewards of an established top team.
The result – Synergies which complete a solution.
Be it the services of individual companies, or integrated holistic solutions from the
entire group, our
maxim is always the same: Holistic concepts, comprehensive
service, and maximum cost-effectiveness.
●
Rittal – State-of-the-art packaging for controllers and IT in the fields
of industry, transport technology, medical technology and
communication
●
Litcos – Business continuity management, analysis, advice and planning
of data centres
●
Lampertz – Physical IT protection, modular IT protection rooms
●
Eplan – Computer Aided Engineering, software and service
●
Mind8 – Software and consultancy firm for cross-disciplinary, mechatronic,
modular-based engineering processes
A top team under the heading of Rittal International
Rittal’s corporate principles.Perfect mastery of our daily business secures our existence and enables us to meet the challenges of the future.
9
R
Co
mp
act
encl
osu
res
AE
Compact enclosurImproved range
10
es AE
Proven a million times over, yet still full of surprises!
Rittal compact enclosures AE.
Now even faster, better and more efficient.
Example: the new mounting plate attachment.
Simply screw a combination bolt into any . . . insert the mounting plate . . . . . . and secure with a nut.
attachment point on the mounting plate . . . This is how easy mounting plate attachmentin compact enclosures can be. You would expect nothing less from Rittal.
Rittal Innovations 2008/Industrial Enclosures
Compact enclosures AE
Co
mp
act
encl
osu
res
AE
Accessories
11Rittal Innovations 2008/Industrial Enclosures
Baying kitfor KL, AE Special screws and nuts ● for fast, simple assembly without thread-tap-
ping. ● compression of the seal is limited to a predefi-
ned level, to ensure a long-lasting permanent seal between enclosures.
Seal, self-adhesive ● comprised of bayable sealing elements and
corner pieces, for individual adaptation to various enclosure sizes.
One pack is sufficient for a baying point up to H x D = 800 x 350 mm.
Supply includes:Sealing elements, assembly parts.
Available from November 2008.
Packs of Model No. SZ
1 set 1199.100
Mini-comfort handle for AE with cam lockFor retro-fitting to AE enclosures with cam lock.
Handle mounting: ● vertically from an enclosure height of 380 mm ● horizontally from an enclosure width of 300 mm are both supported. Prepared for the installation of standard commer-cially available semi-cylinders, 40 or 45 mm to DIN 18 252, and lock and push-button inserts.
Material:Die-cast zinc
Accessories:
Lock and push-button inserts, see Cat. 32, page 948. Semi-cylinder, CS 9785.040, see Cat. 32, page 957.
Version Model No. SZ
RAL 7035 2537.000
Wall mounting bracket for AE For attaching to the enclosure from the outside. Simply insert the expandable dowel into the en-closure hole from the outside, and screw-fasten the wall bracket from the outside.
Material:Sheet steel, zinc-plated, passivated
Supply includes:Assembly parts for mounting on the enclosure.
Available from November 2008.
Packs of Model No. SZ
4 2508.100
Ba
Baying systems TSIP 66/NEMA 4x, NEMA 4
12
8
T
F1
G1
H
B
yin
g s
yste
ms
TS
8
NE
W: ● As an alternative to enclosu-res with fitted side panels. ● Now bayable for larger enclo-
sure combinations.
Material:NEMA 4x: Stainless steel 1.4301 (AISI 304)
NEMA 4: Sheet steel, spray-finished
Enclosure frame, roof, base/plinth, rear panel, side panels: 1.5 mm Door: 2.0 mm Mounting plate: 3.0 mm (sheet steel)
Surface finish:NEMA 4x: Enclosure frame: Uncoated Door, roof, base, rear panel: Brushed on the outside, grain size 400 Mounting plate: Zinc-plated
NEMA 4: Enclosure frame, door, roof, base, rear panel: Dipcoat- primed and powder-coated in textured RAL 7035 Mounting plate: Zinc-plated
Protection category:IP 66 to EN 60 529 (complies with NEMA 4x/NEMA 4)
Supply includes:NEMA 4x/NEMA 4: Enclosure frame with door, roof/base plate, rear panel, mounting plate.
Also required:
Baying accessories per baying point 1 pack of TS 8800.500, 1 pack of TS 8800.400, 1 pack of TS 8800.430, see Cat. 32, page 928 – 930.
Rittal service:
Enclosures, single-door, with depth/width up to 800 mm on request.
Packs of IP 66/NEMA 4x, stainless steel IP 66/NEMA 4, sheet steel Cat. 32, page
Width (B) mm 800 800
Height (H) mm 2000 2000
Depth (T) mm 600 600
Mounting plate width (F1) mm 699 699
Mounting plate height (G1) mm 1896 1896
Model No. TS 1 8450.680 8806.580
Door(s) 1 1
Also required
Side panels IP 66/NEMA 4x, NEMA 4 2 8700.680 8106.580
Baying frame IP 66/NEMA 4x, NEMA 4 1 8700.010 8700.010
Base/plinth
Componentsfront and rear
Height 100 mm 1 set 8701.800 8601.800 893, 899
Height 200 mm 1 set 8702.800 8602.800 893, 899
Trim panels (sides)Height 100 mm 1 set 8701.060 8601.060 893, 899
Height 200 mm 1 set 8702.060 8602.060 893, 899
Base/plinth trim, modular SO 4 2913.000 – 899
Accessories
Cable clamp rails 2 4192.000 4192.000 1061
System support rails 2 4362.000 4362.000 1000
Support strips for door 20 4598.000 4598.000 964
Wiring plan pocket, sheet steel 1 4118.000 4118.000 967
Lock systems
Standard double-bit lock insert may be exchanged for lock inserts, type F, see Cat. 32, page 956 and comfort handle, see Cat. 32, page 947 – 948.
Ritta
Side panels IP 66/NEMA 4x, NEMA 4 For termination of the enclosu-res while preserving the protec-tion category.
l Innovations 2008/Industrial Enclosures
Baying frame IP 66/NEMA 4x, NEMA 4 Foamed-in on both sides for sealing between two enclosu-res, one version (stainless steel) for NEMA 4x and NEMA 4.
Baying systems TS 8
Bay
ing
sys
tem
s T
S 8
TS isolator door cover (US version)Including main door lock for safety locking of enclosures and bayed enclosure suites in accor-dance with US regulations, only in conjunction with the following types of main switches: ● Allen Bradley 1494 V-H1 (actuating lever) ● Square D 9422 A1 ● ITE Siemens Max-Flex series/FHOH
(only available in the USA) ● General Electric TDA Type 1 and 2 ● Moeller NZM-XSHGVR 12-NA
Benefits: ● Compact design with a width of just 50 mm. ● May be mounted instead of a side panel.
With this cover, all standard single-door TS 8 enclosures may be configured as isolator door enclosures. The complete installation surface of the enclosure is retained.
● May be mounted optionally on the left or right of the enclosure.
● In conjunction with the integrable TS 8 moun-ting plate infill (see Cat. 32, page 981) the mounting surface of the main enclosure can be enlarged by around 14 %.
Material:Sheet steel
Surface finish:Powder-coated, RAL 7035
Protection category:IP 55 to EN 60 529, complies with NEMA 12.
Supply includes:Main door lock, cover plate and assembly parts.
Also required:
Operating mechanism, TS 4912.000, for enclos-ure with isolator door cover and additionally every fourth adjacent enclosure. Adjacent door locking, TS 4911.000, for every adjacent enclosure. Interconnecting rods, for every adjacent enclos-ure in the appropriate enclosure width.
Accessories:
Mounting plate infill, see Cat. 32, page 981.
Isolator door locking (US version)
3 4 3 4 3
22 2 1 5
Width mm
Height mm
Depth mm
Model No. TS
50 1800 400 8900.840
50 1800 500 8900.850
50 2000 500 8900.050
50 2000 600 8900.060
Operating mechanism
Adjacent door locking
Interconnecting rod
Connection component
Main door latch
1
2
3
4
5
Door latch for bayed enclosure suites For extending the door locking of commercially available main switches to bayed suites TS. Adjacent doors cannot be opened until the main door has been opened.
Operating mechanism (Fitted in the enclosure with main switch and additionally in every fourth adjacent enclosure)
1 Model No. TS
Operating mechanism 4912.000
Adjacent door locking (installation in adjacent enclosure)
2 Model No. TS
Adjacent door locking 4911.000
Interconnecting rods To extend locking from the main enclosure to the adjacent enclosures of a bayed suite. An interconnecting rod corresponding to the width of the enclosure is required for each adjacent enclosure.
3 For enclosure width mm
Packs of Model No. TS
600 10 4916.000
800 10 4918.000
1200 10 4920.000
complies
with UL508A
Isolator door cover, door locking
13Rittal Innovations 2008/Industrial Enclosures
1
2
3
Top
C
TopConsole system TPConsoles with enlarged installation
14
depth for 3-part assembly
H
B
H1
B1
T
T1
on
sole
sys
tem
TP
Co
nsole for mounting on pedes-tal with depth 500 mm in con-junction with desk unit. Opening at the rear, with rear panel hin-ged at the bottom and cam locks. Side panels with bolts for mounting rails for interior instal-lation.Material:Sheet steel Enclosure: 1.5 mm Cover: 2.0 mmDesign handle strip: Aluminium Corner protectors and lock lid: Plastic, self-extinguishing
Surface finish:Enclosure and cover: Dipcoat-primed, powder-coated in textured RAL 7035 on the outside Design handle strip: Natural-anodised Corner protectors and lock lid: RAL 7015
Protection category:IP 55 to EN 60 529, complies with NEMA 12 (when mounting on a desk unit).
Supply includes:Enclosure with cover at the front, hinged at the bottom, including cover retainer, rear door, hinged at the bottom with cam locks, base open for individual cable entry.
Rittal service:
Other sizes, cut-outs and holes available on request.
Detailed drawing, see page 100.
Width (B) mm Packs of 600 800 1200 1600 Cat. 32, pageHeight (H) mm 785 785 785 785
Depth (T) mm 525 525 525 525
Max. cut-out Width (B1) mm 488 688 1088 1488
Height (H1) mm 413 413 413 413
Installation depth (T1) mm 415 415 415 415
Model No. TP 6720.200 6721.200 6722.200 6723.200
Accessories
Rail for interior installation For height 4 5001.051 5001.051 5001.051 5001.051 992
Punched section with mounting flange 17 x 73 mm
For width 4 8612.060 8612.080 8612.020 – 993
For depth 4 8612.030 8612.030 8612.030 8612.030 993
Mounting bars For width 20 8800.130 4579.000 – – 997
For depth 20 4594.000 4594.000 4594.000 4594.000 997
Punched section with mounting flange 17 x 73 mm
For front cover 4 8612.150 8612.150 8612.150 8612.150 993
For rear cover 4 8612.060 8612.060 8612.060 8612.060 993
Punched rail 18 x 38 mm For front cover 4 8612.250 8612.250 8612.250 8612.250 996
Mounting bars For front cover 20 4695.000 4695.000 4695.000 4695.000 997
For rear cover 20 8800.130 8800.130 8800.130 8800.130 997
Partial mounting plate
200 mm width 1 6730.310 6730.310 6730.310 6730.310 986
500 mm width 1 6730.330 6730.330 6730.330 6730.330 986
700 mm width 1 – 6730.340 6730.340 6730.340 986
Lock systems
Standard double-bit lock insert in both covers, may be exchanged for 27 mm lock inserts, type A, see Cat. 32, page 956.
To order primed consoles please add extension .800 to the Model No. Delivery times available on request.
Ritta
Interface flapsas programming interface, for maintenance access and for connecting to network struc-tures. Model No. see Cat. 32, page 1151.
l Innovations 2008/Industrial Enclosures
Partial mounting plate TP200 mm, 500 mm and 700 mm wide mounting plates are avail-able as accessories. Screw-fitting at the side enables seve-ral partial mounting plates to be bayed very quickly to form a continuous mounting area. Model No. see Cat. 32, page 986.
Console
Rittal Innovations 2008/Industrial Enclo
s with enlarged installation depth for 2-part assembly
TopConsole system TP
on
sole
sys
tem
TP
H
B
T
H1
B1T1
Co
Top
C
nsole for direct mounting on pedestal with depth 500 mm. Opening at the rear, with rear panel hinged at the bottom and cam locks. Side panels with bolts for mounting rails for inte-rior installation.
Material:Sheet steel Enclosure: 1.5 mm Cover: 2.0 mmDesign handle strip: Aluminium Corner protectors and lock lid: Plastic, self-extinguishing
Surface finish:Enclosure and cover: Dipcoat-primed, powder-coated in textured RAL 7035 on the outside Design handle strip: Natural-anodised Corner protectors and lock lid: RAL 7015
Protection category:IP 55 to EN 60 529, complies with NEMA 12 (when mounting on a pedestal).
Supply includes:Enclosure with cover at the front, hinged at the bottom, including cover retainer, rear door, hinged at the bottom with cam locks, base open for individual cable entry.
Rittal service:
Other sizes, cut-outs and holes available on request.
Detailed drawing, see page 100.
Width (B) mm Packs of 600 800 1200 1600 Cat. 32, pageHeight (H) mm 565 565 565 565
Depth (T) mm 525 525 525 525
Max. cut-out Width (B1) mm 488 688 1088 1488
Height (H1) mm 413 413 413 413
Installation depth (T1) mm 415 415 415 415
Model No. TP 6720.100 6721.100 6722.100 6723.100
Accessories
Rail for interior installation For height 4 5001.050 5001.050 5001.050 5001.050 992
Punched section with mounting flange 17 x 73 mm
For width 4 8612.060 8612.080 8612.020 – 993
For depth 4 8612.030 8612.030 8612.030 8612.030 993
Mounting bars For width 20 8800.130 4579.000 – – 997
For depth 20 4594.000 4594.000 4594.000 4594.000 997
Punched section with mounting flange 17 x 73 mm
For front cover 4 8612.150 8612.150 8612.150 8612.150 993
For rear cover 4 8612.150 8612.150 8612.150 8612.150 993
Punched rail 18 x 38 mm For front cover 4 8612.250 8612.250 8612.250 8612.250 996
For rear cover 4 8612.250 8612.250 8612.250 8612.250 996
Mounting bars For front cover 20 4695.000 4695.000 4695.000 4695.000 997
For rear cover 20 4695.000 4695.000 4695.000 4695.000 997
Partial mounting plate
200 mm width 1 6730.310 6730.310 6730.310 6730.310 986
500 mm width 1 6730.330 6730.330 6730.330 6730.330 986
700 mm width 1 – 6730.340 6730.340 6730.340 986
Lock systems
Standard double-bit lock insert in both covers, may be exchanged for 27 mm lock inserts, type A, see Cat. 32, page 956.
To order primed consoles please add extension .800 to the Model No. Delivery times available on request.
sures
Cable clamp rails C section For strain relief with cable entry. Model No. see Cat. 32, page 1062.
15
TFT monitor Installation variant for surfaces and command panels. Resistive touchscreen for operation with a pen, finger or glove. Model No. see Cat. 32, page 1133.
On
e-p
iece
co
nso
les
TP
One-piece consoleExcellent inner values
16
s TP
The new one-piece console TP boasts exceptional
qualities in terms of its modular interior installation,
assembly-friendliness and system accessories.
It integrates perfectly into the system platform TS 8,
while the extensive, assembly-friendly range of TS 8
system accessories offers infinite installation oppor-
tunities. The benefit to you: Reduced stock levels and
transport costs translate into savings.
Rittal Innovations 2008/Industrial Enclosures
Excellent inner values
One-piece consoles TP
On
e-p
iece
co
nso
les
TP
SoTdum
Top design with functionality: The designer handle strip sits firmly in the hand, and ingen-iously hides the lock of the hinged lid. The design is harmo-niously coordinated with the entire human/machine interface range.
Rittal Innovations 2008/Industrial Enclos
UWpoud
imple single-handed peration: he self-latching stay holds the esk unit lid open at the individ-ally desired angle, with auto-atic latching and unlatching.
ures
ser-friendly security: hereas two to three locks were reviously needed (depending n the width), the single lock now ses locking bars to achieve the ouble locking capability.
STisscfotis
imple assembly: he populated mounting plate inserted at the bottom, and imply secured at the top with lips, leaving both hands free r screw fastening. This installa-
on and locking technique aves time and money.
PPdpmp
Individual interior configura-tion: The numerous components from the Rittal modular system pro-duce a host of individual solu-tions which you are sure to find worthwhile.
ETscui
ractical diversity: erforated system strips fitted to oors and covers for TS-com-atible installation, such as ounting rails or wiring plan ockets.
xemplary cable routing:he TopConsole system also tands for more cable entry ombinations, thanks to indi-vid-al gland plates from the exist-
ng modular TP/CM system.
ETfb
rgoform: he unlocked handle folds down orwards, and the lock is opened y swivelling.
17
On
e-p
One-piece consoleSheet steel
18
s TP
T
H
F1
T
B1
G1
T
H
G1
F1
B1
iece
co
nso
les
TP
Material:
Sheet steel Enclosure: 1.5 mm Door and console lid: 2.0 mm Mounting plate: 3.0 mmDesigner handle strip: Aluminium Corner protectors and lock cover: Plastic, self-extinguishingAvailable from October 2008.
Surface finish:Enclosure, cover and door: Dipcoat-primed, powder-coated in textured RAL 7035 on the outside Mounting plate: Zinc-plated Designer handle strip: Natural-anodised Corner protectors and lock cover: RAL 7015
Protection category:IP 55 to EN 60 529, complies with NEMA 12.
Supply includes:Enclosure, solid rear and sides, door or double door at the front, with locking rod, console lid hinged at rear, 2 stays with automatic latching and unlatching, base open for individual cable entry.
Also required:
Gland plates, see Cat. 32, pages 911 – 912.
Rittal service:
Other sizes, cut-outs and holes available on request.
Width (B1) mm Packs of 600 800 1000 1200 Cat. 32, page
Height (H) mm 960 960 960 960
Depth (T) mm 400/520 400/520 400/520 400/520
Mounting plate width (F1) mm 499 699 899 1099
Mounting plate height (G1) mm 900 900 900 900
Model No. TP 6746.500 6748.500 6740.500 6742.500
Door(s) 1 1 2 2
Base/plinth
Componentsfront and rear
Height 100 mm 1 set 8601.600 8601.800 8601.000 8601.200 893
Height 200 mm 1 set 8602.600 8602.800 8602.000 8602.200 893
Trim panels (sides)Height 100 mm 1 set 8601.040 8601.040 8601.040 8601.040 893
Height 200 mm 1 set 8602.040 8602.040 8602.040 8602.040 893
Cross member, adjustable 2 8601.450 8601.450 8601.450 8601.450 903
Accessories
Rail for interior installationFor height 4 5001.051 5001.051 5001.051 5001.051 992
For lid 4 5001.056 5001.057 5001.058 5001.059 –
Punched section with mounting flange 17 x 73 mm
For lid 4 8612.040 8612.040 8612.040 8612.040 993
For enclosure 4 8612.140 8612.140 8612.140 8612.140 993
For door 4 8612.050 – 8612.040 8612.050 993
Punched rail 18 x 38 mm For enclosure 4 8612.240 8612.240 8612.240 8612.240 996
Mounting bars
For lid 20 4309.000 4309.000 4309.000 4309.000 997
For enclosure 20 4694.000 4694.000 4694.000 4694.000 997
For door 20 4596.000 4598.000 4309.000 4596.000 997
Cable clamp rail 1 5001.080 5001.081 5001.082 5001.083 1062
Wiring plan pocket 1 4116.500 4118.500 4115.500 4116.500 967
Lock systems
Console lid: Standard double-bit lock insert, may be exchanged for 27 mm lock inserts, type A, see Cat. 32, page 956, and for Ergoform-S lock system, see Cat. 32, page 953.
Cable clamp rails 180° hinges
Ritta
For strain relief with cable entry. The length of the cable clamp rail is tailored to the width of the mounting plate. Model No. see Cat. 32, page 1062.
l Innovations 2008/Industrial Enclosures
For retrospective conversion of standard doors with 130° hin-ges, including assembly parts, see Cat. 32, page 963.
Support arm system CP-L
Su
pp
ort
arm
sys
tem
CP
-L
Permissible load depending on system assemblyIntermediate hinge CP 6523.0X0 should only be used once per system!
Per
mis
sib
le s
tatic
load
[N
] (e
nclo
sure
and
ver
tical
su
pp
ort a
rm s
ectio
n)
800
700
600
500
400
300
200
100
200018001600140012001000800600400200
Jib length (mm)
1
2
3
Support arm, height adjustable
19Rittal Innovations 2008/Industrial Enclosures
Support arm, height adjustable, CP-LOffers enhanced ergonomics thanks to: ● Adjustment range
– for tall and short operators – for seated and standing work adjustable from 400 mm – 800 mm via an ad-justment screw at the front of the support arm.
● Precise coordination of the compression spring to the enclosure weight via an adjusting screw at the rear of the support arm.
● Complete functional reliabilty – if the compres-sion spring breaks, the arm will remain in posi-tion.
● Clip-off plastic panels for access to integral cable routing.
● Tilting angle of the mounted enclosure is iden-tical in every height position.
NEW: ● More space for cable routing. ● Cables with connectors such as DVI, VGA are
also easily inserted. ● Integral locking in three stages.● Superior load capacity.
Supply includes:Assembly parts.
Available from November 2008
Top end stop
Bottom end stop
Locking option at +20° and –20°
1090.5
824.5
30°
120
84
8049
20°
–20°
30°
1
2
3
App
rox.
400
App
rox.
400
40 70
20
34
1
2
3
Overall length mm
Colour RAL
Weight range kg1)
Model No. CP
1090 9006 8 – 15 6510.320
1090 9006 15 – 32 6510.330
1090 9006 20 – 40 6510.3401) For configured enclosure and vertical support section.
Support section CP-L, open Attachment to the connection components with 4 self-tapping screws in the screw channel, may be cut to any required length, no thread-tapping required. With open cable duct, for easy servi-cing access and for pre-assembled cables with connectors; easily locked via cover section.
Size: 50 x 85 mm
Wall thickness: 8 mm
Material:Extruded aluminium section, plastic
Supply includes:Cover section.
Rittal service:
Individual lengths and machi-ning, e.g. recesses on the inner bar, available on request.
7.45
49
18
34
50
21
85 40
8
19
L
System assembly without intermediate hinge
System assembly with one intermediate hinge
System assembly with one intermediate hinge and one top mounted/wall-mounted joint
1
2
3
Length (L) mm
Weight kg
Model No. CP
RAL 7035
Model No. CP
RAL 9006
500 2.4 6511.050 6511.060
1000 4.75 6513.050 6513.060
Qu
ickl
ine
pan
el
Quickline panelIndividuality as standard
20
These days, many customer requirements can be met directly off the shelf with standard enclosures.
But for those who require something a little more individual, the Rittal service team are on hand to implement
your requests.
Allow yourself to be inspired by the above examples, and give us a call.
Rittal Innovations 2008/Industrial Enclosures
Operating and keyboard housing
Quickline panel
Rittal Innovations 2008/Industrial Enclo
ickl
ine
pan
el
B1
T2
B2
H2
H2
T4
B4
H4
T1
H1
T3
H3
B1
T2
B2
H2
H1
H3
B4
H4
T1
T3
T4
CP 6690.600 CP 6690.610
CP 6691.600 CP 6691.610
Qu
Th
e keyboard/operating hou-sing to suit all applications● Keyboard housing is quickly and easily opened for servi-cing.
● Operating and keyboard housing connected via an enclosure duct connector− The angle between the
operating and keyboard housing is 120°.
− Also used for cable routing. ● Standard support arm cut-out
CP-L Ø 130 mm. May be optionally extended to the larger support arm system CP-XL/CP-Q simply by drilling 4 holes.
● Multi-function hinges: − Simple, fast assembly of the
operating panel. − Door easily removable and
refitted for servicing purpo-ses.
− Interchangeable door hinge for symmetrical enclosures.
Direct command panel moun-ting:
Door with one aperture:
● Siemens Sinumerik: − OP 010, − OP 010 C, − OP 012, − OP 015.
● Siemens Simatic: − Panel PC 477, 577, 677B
(12˝ keyboard, 15˝ touch-screen),
− Panel PC 577B (15˝ touch-screen),
− MP 277B 10˝ keyboard, − MP 377B 12˝ keyboard,
15˝ touchscreen.
Door with second or keyboard housing cut-out:
− MCP 483C, − MCP 483, − PP 012.
Material:Enclosure and door: Sheet steel
Surface finish:Dipcoat-primed, powder-coated in textured RAL 7035 on the out-side
Protection category:IP 55
Supply includes:Enclosure with cut-out and rein-forcement, prepared for support arm system CP-L Ø 130 mm, door with foamed seal, two enclosure duct connectors, threaded bolts in all 4 corners for flexible interior installation via mounting brackets (see table).
Rittal service:
Other dimensions and aper-tures for different controllers available on request.
Detailed drawing,see page 100.
Width (B1) mm 575 Cat. 32, pageHeight (H1) mm operating housing 383 538
Height (H3) mm keyboard housing 228
Depth (T1) mm operating housing 191
Depth (T3) mm keyboard housing 90.5
For installation panel W x H operating housing 482.6 mm (19˝) x 310 mm (7 U) 482.6 mm (19˝) x 310 mm (7 U) + 482.6 mm (19˝) x 155 mm (3.5 U)
For installation panel W x H keyboard housing 482.6 mm (19˝) x 155 mm (3.5 U)
Cut-out dimensions B2 x H2 operating housing 450 mm x 290 mm 450 mm x 290 mm + 450 mm x 137.5 mm
Cut-out dimensions B4 x H4 keyboard housing 450 mm x 137.5 mm 450 mm x 137.5 mm
Installation depth (T2) operating housing 185 mm
Installation depth (T4) keyboard housing 87 mm
Support arm connection Top Bottom Top Bottom
Model No. CP 6690.600 6690.610 6691.600 6691.610
Accessories
Mounting bracket for the installation of punched sections with mounting flange and TS support strips 6205.100 6205.100 1004
Punched section with mounting flangehorizontal 8612.160 8612.160 993
vertical – 8612.150 993
TS mounting barshorizontal 4696.000 4696.000 997
vertical 4594.000 4695.000 997
Installing the operating panelThe doors of the keyboard/ope-
Hinges The hinges of the keyboard hou-
sures
rating housing are incredibly easy to remove. This means that operating panels or keyboard are secured very conveniently from the rear in just a few actions.
21
sing make it all possible – easy opening for population and maintenance, and problem-free swapping of the door hinges.
Op
Operating housingRear panel with thermoelectri
sc cooler
erat
ing
ho
usi
ng
s
The low-vibration thermoelectric cooler is compact, light-
weight and efficient, providing an optimum cooling solution at
the human/machine interface, and is now available to order
via a design code number.
Customers can choose from two mounting variants:
● Externally mounted unit – on the rear of the enclosure.
● Built-in unit – integrated into the enclosure.
Units may be mounted either horizontally or vertically, and
several units may be bayed in a modular configuration.
Further details may be found on page 101.
22 Rittal Innovations 2008/Industrial Enclosures
2.6 Rear panelAdditional design code number for the Comfort Panel
The full range of design code numbers may be found in Cat. 32, from page 196.
Rear panel with thermoelectric cooler (built-in unit)
2.6
7
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8
A2 5 0 0 2 7 2 1
Installation criteria:
Variant From installation depth mm
Rear panel Dimensions of front panel
Hinged Screw-fastened W mm (H1)) H mm (W1))
External mounting 74 � � 395
215Internal mounting113
� – 415
Internal mounting – � 3951) Dimensions for vertical mounting.
In addition to the design code number, the following informa-tion is also needed: ● Built-in or externally mounted
unit ● Horizontal or vertical mounting ● Please specify the position or
enclose a sketch.
Available from October 2008.
Operating housings
Op
erat
ing
ho
usi
ng
s
Rear panel with thermoelectric cooler
23Rittal Innovations 2008/Industrial Enclosures
2.4 Rear wallAdditional design code number for the Optipanel
The full range of design code numbers may be found in Cat. 32, from page 206.
Rear panel with thermoelectric cooler (externally mounted unit)
2.4
5
2.1 2.2 2.3 2.4 2.5 2.6
3 4 5 5 2 1
Installation criteria:
Variant From installation depth mm
Rear panel Dimensions of front panel
Hinged Screw-fastened W mm (H1)) H mm (W1))
External mounting 100 � � 420
215Internal mounting150
� – 445
Internal mounting – � 4201) Dimensions for vertical mounting.
In addition to the design code number, the following informa-tion is also needed: ● Built-in or externally mounted
unit ● Horizontal or vertical mounting ● Please specify the position or
enclose a sketch.
Available from October 2008.
3.8 Rear wallAdditional design code number for the VIP 6000
The full range of design code numbers may be found in Cat. 32, from page 216.
Rear panel with thermoelectric cooler (built-in unit)
3.8
9
3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9
3 8 1 1 1 2 1 9 1
Installation criteria:
Variant From installation depth mm
Rear panel Dimensions of front panel
Hinged Screw-fastened W mm (H1)) H mm (W1))
External mounting
155
� � 420
215Internal mounting � – 445
Internal mounting – � 4201) Dimensions for vertical mounting.
In addition to the design code number, the following informa-tion is also needed: ● Built-in or externally mounted
unit ● Horizontal or vertical mounting ● Please specify the position or
enclose a sketch.
Available from October 2008.
24
Form 1Low-voltage switchgear in an open design
Form 2-4Low-voltage switchgear with form separation
ISVDistribution enclosure
The modular solution comprising the TS 8 Top enclosure system and the standardised Maxi-PLS busbars. See Cat. 32, page 413.
Applications:● Main current distribution systems● Current rectification applications● Wind power● Industry distribution systems● Mechanical engineering
Modular form separation of the TS 8 Top en-closure system in conjunction with busbar systems up to 4000 A as a modular solution.
Applications:● Process industry● Water supply/disposal● Building distribution● Chemical industry● Mechanical engineering
Everything from a single source: ISV-TS 8 enclosure system, ISV-AE wall-mounted dis-tributors, ISV modules and SV components. See Cat. 32, page 457.
Applications:● Building distribution systems● Industry distribution systems● Subdistribution systems
Rated voltage: Rated transient
Technical specifications:
Rated voltage: Rated transient Rated voltage: Rated transient
up to 690 V ACRated currents:up to 4000 A
current resistance: up to 70/124 kA
Protection category:up to IP 54
up to 690 V AC
Rated currents:up to 4000 A
current resistance: up to 75 kA
Protection category: up to IP 54
up to 690 V AC
Rated currents: up to 630 A,up to 1600 A
current resistance: up to 50 kA
Protection category: up to IP 54
Rittal Innovations 2008/Power Distribution
Ri4Power system overview
iew
Rittal Ri4Power – structured system solutions for the reliable, fast assembly of low-voltage switchgear
systems for machines, plant, and buildings. Rittal Ri4Power is the new term for low-voltage switchgear and
distribution enclosures under one roof – in accordance with the internationally valid standard IEC 60 439-1.
Be amazed at just how easily and precisely your solution can be created. There are two decisive features:
Combination scope and compatibility. These two terms encompass all the major advantages. The combination
scope makes Ri4Power the optimum solution for your application.
And the compatibility of the components ensures improved cost-effectiveness.
Note:
Up-to-date information may be found in our new Ri4Power Form 2-4 brochure.
syst
em o
verv
SoftwarePlanning, configuration, selection
Ri4
Po
wer
Innovative software – the fast, perfect route to your individual Ri4Power system solution.
Rittal Power Engineering ● For planners: Tendering text and plan
drawings at the press of a button.● For quote preparation: The exact costing
for each part in just a few steps. ● For plant manufacturers: Field-related bills
of materials and drawings at the press of a button. See Cat. 32, page 1153.
25
Rittal Innovations 2008/Power DistributionRi4Power Type-tested to IEC 60 439-1 Accidental arc testing to IEC 61 641
Components Modular individuality: Enclosure system and system accessories
TS 8, the Top enclosure system, is the system platform for all Ri4Power applications. Each enclosure is a specialist for even the most excep-tional tasks. By combining Ri4Power and busbar components with general system accessories, you can create infinite power distribution possibilities.
Uncompromising safety: RiLine60, Maxi-PLS and Flat-PLS busbar systems
Type-tested system technology for all low-voltage applications in control and power distribution engineering.
The busbar systems offer a host of useful features to make installa-tion, assembly and operation easy and uncomplicated. For the plant operator, the Rittal Ri4Power guarantees uncompromisingly high safety standards in power distribution.
Rit
tal R
iLin
e60
busb
ar s
yste
ms
Rittal RiLine60 busbBusbar supports 1-/2-pole
26
1 2
ar systems
SV 9340.0301
40
1620
140
16
25
165
150
SV 9340.0402
Material:
Polyamide (PA 6.6), 25 % fibreglass-reinforced. Continuous operating tempera-ture max. 130°C. Fire protection corresponding to UL 94-V0.Colour:RAL 7035
Version Page
Number of poles 1-pole 2-pole
Bar centre distance – 60 mm
For busbars E-Cu 12 x 5 – 30 x 10 mm 12 x 5 – 30 x 10 mm
Tightening torque ● Assembly screw M5 x 16 ● Cover attachment
3 – 5 Nm1 – 3 Nm
3 – 5 Nm1 – 3 Nm
Packs of 4 4
Model No. SV 9340.0301) 9340.0402)
Accessories
Additional fastening attachment � – see below
1) PEN/N/PE support 2) N/PE support
1 2
Additional fastening attachment for busbar support SV 9340.030 Optional plug-in anti-twist guard for SV 9340.030. Facilitates support alignment with horizontal or vertical mounting.
Material:Polyamide (PA 6.6), 25 % fibreglass-reinforced. Continuous operating temperature max. 130°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Supply includes:8 connection pins.
Packs of Model No. SV
4 9340.035
Rittal Innovations 2008/Power Distribution
Rittal Innovations 2008/Power Distribution
Rittal RiLine60 busbar systems
Rit
tal R
iLin
e60
busb
ar s
yste
ms
OM adaptors 65 A/cross members/twin cords
OM adaptors 65 Awith tension spring clamp For mounting on 60 mm busbar systems.
Material:Polyamide (PA 6.6), 25 % fibreglass-reinforced. Continuous operating temperature max. 130°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035 (chassis)
Rated current up to 65 A
Rated operating voltage 690 V~
Connection of round conductors 2.5 – 16 mm2
Number of support rails, height 10 mm 2
Packs of 1
Model No. SV 9340.620
Cross membersfor RiLine60 busbar connections, 3-poleTo increase the clearance between active con-ductors when using flat bars and PLS 800/1600 for UL applications.
Material:Polyamide (PA 6.6), 25 % fibreglass-reinforced. Continuous operating temperature max. 130°C. Fire protection corresponding to UL 94-V0. Also required:
Support panel SV 9340.220, see Cat. 32, page 351/353.
Version forWidth
(B) mm
Packs of Model No. SV
Single connection 60 2 9340.240
Baying connection1) 160 2 9340.2301) From enclosure to enclosure
Twin cords AWG 10for OM adaptors with tension spring clamp 2.5 – 16 mm2 Pre-assembled connection cables for individual connection of up to two switchgear units per adaptor.
Cable length: L1 = 140 mm, L2 = 250 mm.
Material:Insulating PVC.Temperature-resistant up to 105°C.Wire ends with ultrasonic wire-end compression.
Version Packs of Model No. SV
AWG 10 = 5.26 mm2 6 mm2 6 9340.820
AWG = American Wire Gauges
27
Rit
tal R
iLin
e60
D-S
wit
ch
Rittal RiLine60 D-SwBus-mounting fuse base 63 A
28
itch(3-pole)
27
226
8067
5060
60
22
● 3-pole sw
itchable bus-moun-ting fuse base for snap-on mounting on 12 – 30 x 5/10 mm busbars or PLS 800/1600 with 60 mm bar centre distance.● For the use of fuse inserts to DIN 49 522.
● With integral visual fuse moni-toring via flashing indicator.
● Safely released via indepen-dent manual actuation.
● Lockable in the isolated position.
● Lockable and sealable. ● A display panel integrated
into the enclosure visually indicates the device’s opera-ting status.
Material:Polyamide (PA 6). Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Basis of test: DIN EN 60 947-3
Supply includes:Reducing retaining springs.
Rated operating current Ie 63 A
Rated operating voltage Ue 400 V~
Service short-circuit breaking capacity Icn 50 kA
Number of poles 3-pole
Fuse inserts D011)/D02
Terminal for round conductors2) 1.5 – 25 mm2
Tightening torqueTerminal screw 3 – 4 Nm
Level of contamination 3
Overvoltage category IV
Min. voltage, indicator light 100 – 400 V~
Switching category AC 22B
Contact hazard protection IP 20
Packs of 3
Model No. SV 9340.9501) When using D01 fuses, reducing retaining springs must be used. 2) Wire end ferrules should be used with fine wire conductors.
Rittal Innovations 2008/Power Distribution
Rittal Innovations 2008/Power Distribution
2
Fuse holder (3-pole)
Rittal RiLine60 Class
Rit
tal R
iLin
e60
Cla
ss
3
59
42.5
17.5
78
52.5
97.5
32.5
114
80
56
120
122
1 2
1
● UL/CSA L● Fuse hold
fuses to Astandards
● For snap-35 mm suEN 60 71or RiLine6adaptor c(OM adapsee Cat. 3page 362
● Visual fusindicator
● 3-pole, sw
40
89
62
3
isted. er for the use of merican/Canadian . on mounting on pport rails to DIN 5 (7.5/15 mm high) 0 component ombinations tors/supports, 2, – 365, 368). e monitoring via lights. itchable off-load.
Material:Polyamide (PA 6). Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Approvals:
SV 9345.000: UL 512, CSA C22.1, Class 6225
SV 9345.010, SV 9345.030: UL 512, CSA, Class 6225
Version
Fuse type (class) CC J J
Rated operating current Ie 30 A 30 A 60 A
Rated operating voltage Ue 600 V~ 600 V~ 600 V~
Number of poles 3-pole 3-pole 3-pole
Fuse size 10 x 38 mm 21 x 57 mm 27 x 60 mm
Switching capacity RSM Sym Rating 200 kA 200 kA 200 kA
Min. voltage, indicator light 115 V 115 V 115 V
Connection of round conductors 2.5 – 10 mm2 AWG 6 – 14
2.5 – 25 mm2 AWG 2 – 14
2.5 – 25 mm2 AWG 2 – 14
Tightening torqueTerminal screw
2 Nm 14.75 in-lbs
solid/stranded Cu
4 Nm 88.90 cm-lbs
solid/stranded Cu
5 Nm 114.30 cm-lbs
solid/stranded Cu
Contact hazard protection IP 20 IP 20 IP 20
Packs of 4 2 2
Model No. SV 9345.000 9345.0101) 9345.0301) May also be used for cylindrical fuses 22 x 58 mm to French standards without UL licensing.
1 2 3
~ ~ ~
29
Ele
ctro
nic
Pac
kag
ing
Electronic Packag
ing MicroTCA30 Rittal Innovations 2008/Electronic Packaging
MicroTCA – Compact design, extended range of applications
The MicroTCA specification MTCA.0 R1.0 was devised to
supplement the AdvancedTCA standard as a compact solu-
tion for cost-critical applications in the low-end range.
MicroTCA is distinguished by its very compact design as well
as its high level of scalability, modularity and significantly
reduced system costs.
What is more, the consistent platform strategy means a shor-
ter time-to-market. Wherever super-fast data transmission or
data storage is needed, MicroTCA systems are increasingly
becoming the number one choice. This is particularly true
of telecoms applications, but they are also becoming in-
creasingly popular for the ever-faster open- and closed-loop
control tasks in the industrial sector.
Rittal Electronic Systems offers “complete know-how” in
the professional electronic packaging sector.
For AdvancedTCA, MicroTCA, CPCI and VME applications.
The performance spectrum comprises complete “plug &
play” systems including backplanes, power supplies and
effective climate control concepts.
RiTCA – Complex system solutions from Rittal for AdvancedTCA and MicroTCA
AdvancedTCA Shelves in 5 and 13 U
ATCA/AMC carrier blades AdvancedMC face plate kits MicroTCA systems 2, 3, 4, 5 U
Rittal Innovations 2008/Electronic P
MicroTCA Cube
MicroTCA
B
T
H
Thanks to
roT
CA
its compact dimensi-ons, the MicroTCA Cube is ideal for use in an industrial environ-ment. It may be mounted either directly on the mounting plate, or on the machine itself. This is achieved using mounting brackets with integral keyholes or adaptors to mount directly on support rails.
Benefits at a glance: ● Complies with MicroTCA.0 R1.0. ● Compact design. ● For mounting on a mounting
plate or directly on the machine.
● 7 slots for 6 x AMC, 1 x MCH. ● Plug-in fan unit with two axial
fans and filters. ● Integral AC/DC power pack. ● Fully assembled, wired and
function tested.
Technical specifications: ● 6 slots at the front. ● Including backplane, 6 slots. ● Integral, pull-out fan unit. ● AC/DC power pack, 350 W.
Material:Stainless steel
Supply includes:1 enclosure system.
Accessories:
Mounting bracket for use on mounting plates with keyholes.Top-hat rail adaptor for mounting on support rails.
Mic
Packs of Dimensions
Width (B) mm 109
Height (H) mm 307
Depth (T) mm 286
Model No. RP 1 3666.001
Top-hat rail adaptor Mounting bracket
Accessories
ack
MicroTCA Cubefor 6 AMC, 1 x MCH
aging
Fan unit and filter, pull-out
for mounting on support rails.
Packs of Model No. RP
2 3687.739
for mounting on mounting plates. May be fitted at the side or rear.
For mounting
Packs of
Model No. RP
Side 1 3666.002
Rear 1 3666.003
31
Th
erm
oel
ectr
ic c
oo
ler
32
Thermoelectric cooSmall, lightweight, efficient
ler
The powerful thermoelectric cooling unit in a light-
weight design. The eco-friendly climate-control solu-
tion for command panels and small enclosures – an
energy saving of more than 60 % compared with
conventional industry systems.
Mounting
Internal mountingWhen installed in the enclosure, the unit only protrudes by a few millimetres, and therefore does not interrupt either the aesthetic appearance or freedom of move-ment on support arm systems.
External mountingIts low weight also allows it to be externally mounted on simple aluminium rear panels or blan-king panels.
Support arm systems Thanks to its low-vibration ope-ration and minimal weight, the thermoelectric cooler from Rittal is the ideal partner on support arm systems.
Scalability
Scalable output The modular designs allows simple scaling of the cooling output depending on your re-quirements, both horizontally . . .
. . . and vertically. ControllerEnergy-efficient control with pulse width modulation and innovative soft start function ensures a constant enclosure temperature and a long service life of the Peltier elements.
Benefits:● Cooling output 100 watts,
thanks to state-of-the-art Peltier technology.
● Low-maintenance thanks to an elementary unit layout.
● High operating ratio (COP >1) thanks to optimum interplay between all components.
● Maximum possible protec-tion for your electronics, floa-ting change-over fault signal contact in case of overtem-perature.
● USB interface to unit pro-gramming.
● Minimal build volume and minimal weight compared with other industry systems.
● Large voltage range from 110 – 230 V (AC) and 24 V (DC).
● RJ 45 interface for linking to the Rittal CMC-TC monito-ring system.
Rittal Innovations 2008/System Climate Control
Useful cooling output 100 W
Thermoelectric cooler
B = WidthT = Depth
Ap
plication: ● Ideal for cooling small enclos-ures and command panels. ● Especially suitable for use on
support arm systems as well. ● Optimum space utilisation. ● Targeted cooling of hotspots.
Supply includes:Thermoelectric cooling unit, wired ready for connection, with multilingual documentation and mounting accessories.
Th
erm
oel
ectr
ic c
oo
ler
33Rittal Innovations 2008/System Climate Control
Model No. SK 3201.200 3201.300
Dimensions mmWHD
125 400 155
Rated operating voltage V/Hz 110 – 230 V (AC) 24 V DC
Refrigeration factor/COP L 35 L 35 1.0 1.2
Useful cooling output to DIN 3168 L 35 L 35 100 W 100 W
Power pack integrated � –
Colour of cover/unit RAL 7024/Anodised aluminium
Protection rating IP 54
Weight 3.5 kg 3.0 kg
Temperature range 0°C to +55°C 0°C to +65°C
Air throughput, unimpeded air flow 50 m3/h
Type of connection Plug-in spring connection terminal
Pre-fuse gG 2 A 10 A
Accessories Packs of Page
Power pack 150 watts for 35 mm top-hat rail 1 – 3201.030 49
Filter mat 1 3201.050 49
Door-operated switch 1 4127.010 92
Digital temperature indicator 1 3114.100/3114.115 3114.024 Cat. 32, p. 714
We reserve the right to make technical modifications. Special voltages available on request.
QK .
34
Cool EfficiencyEnergy consumption down, o
perating ratio up50.000
40.000
30.000
20.000
10.000
0
90.000 kg
80.000 kg
70.000 kg
60.000 kg
50.000 kg
40.000 kg
30.000 kg
20.000 kg
10.000 kg
0 kg
Super-efficient, eco-friendly, cost-cutting – that’s energy
efficiency from Rittal. The efficient use of available
resources is one of the main aims when developing new
cooling systems, particularly in view of the escalating
global climate and environmental problems, coupled
with ever-rising energy prices. Saving energy, cutting
climate control costs, cooling energy-efficiently and
protecting the environment – Cool Efficiency,
the energy-saving cooling units from Rittal,
already boast all these achievements.
46.199 €
32.369 €
13.830 €
-30 %
81.051 kg
56.788 kg
24.263 kg
-30 %
Standard Cool Efficiency Savings
Cool Efficiency cooling units from Rittal are up to 30 % more economical than conven-tional cooling units of the same cooling output. At an assumed number of 200 cooling units, this translates into savings of around 14,000 euros and 24 t CO2.
Operating at full load 70 %
Operating at partial load 30 %
Operating time per day 16 hours
Operating time per annum 240 days
Electricity price per kWh 0.11 1)
Number of units 2001) Source: VEA, VDEW, as per 1/2007
C
Energy cost savings per annum
These CO2 savings are eq
CO2 savings per annum
Rittal InnoStandard Cool Efficiency Savings
ui-valent to planting 822 trees, or put another way, the emis-sions produced from driving 134,795 km.
Ave. CO2 emission per kWh in Germany 0.57. Ave. figure for Germany1) 1) Source: Energy mix in Germany
vations 2008/System Climate Control
Rittal Innovations 2008/System Climate Co
NEW 3
energy
Cool Efficiency, useful cooling output 1000 W
Wall-mounted cooling units
0 % less
consumption
105155
210
50
950
260400
Supply incNano-coattegral condFully wiredtion, includand assem
ludes:ed condenser and in-ensate evaporation.
ready for connec-ing drilling template bly parts.
Available from October 2008.
ntrol
Wal
l-m
ou
nte
d c
oo
ling
un
its
Model No. SK with Basic controller, RAL 7035 3304.700
Model No. SK with Comfort controller, RAL 7035 3304.800
Rated operating voltage V/Hz 230, 1~, 50
Dimensions mm WHD
400 950 260
Useful cooling output to DIN 3168 L 35 L 35 1000 W
Rated current max. 3.0 A
Start-up current 12.0 A
Pre-fuse T 10.0 A
Power consumption Pel to DIN 3168
L 35 L 35L 35 L 45
520 W580 W
Refrigeration factor ε = L 35 L 35 1.9
Refrigerant R134a, 325 g
Permissible operating pressure p. max. 20 bar
Temperature and setting range +20°C to +45°C
Protection category to EN 60 529
External circuit IP 34
Internal circuit IP 54
Duty cycle 100 %
Type of connection Plug-in terminal strip
Weight 40 kg
Air throughput of fansExternal circuit 600 m3/h
Internal circuit 450 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)
Accessories Packs of Cat. 32, page
Filter mats 3 3286.400 723
Metal filters 1 3286.410 724
Door-operated switch 1 4127.000 1030
SK bus system for Comfort controller 1 3124.100 717
RiDiag II including cables for Comfort controller 1 3159.100 1154
Interface card for Comfort controller 1 3124.200 716
Condensate hose 1 3301.612 720
Delivery times on request.Special voltages and other output categories available on request. Technical modifications reserved.
QK .
QK/Pel.
35
Air
/air
hea
t ex
chan
ger
s
Air/air heatWall-mounted, rai
36
exchangerslway-proof version
H
T1B T1
External mounting
Partial installation1)
Internal mounting
B = WidthT = Depth
Rittal air/air
heat exchangers in a railway-proof version are used specifically in the mobile railway engineering sector, e.g. for local trains, locomotives and high-speed trains. Rittal is the only supplier of heat exchangers in a railway-proof design currently on the market.These products are available in both 24 V DC and 110 V DC.Railway-proof design of the units construction to EN 50 155, halogen-free connection cables, screw protection, shock and vibration testing to EN 61 373, preparation for EN 45 545, and spray-finishing in RAL 7035 S to DB TL 918340, among other things.
Benefits, technical details:● External and internal fans may
be controlled separately● Simple maintenance
Supply includes:Fully wired unit ready for con-nection.
Detailed drawing, see page 103.
Model No. SK 3126.424 3128.424 3129.424 3130.424 3126.410 3128.410 3129.410 3130.410 Page
Rated operating voltage 24 V (DC) 24 V (DC) 24 V (DC) 24 V (DC) 110 V (DC) 110 V (DC) 110 V (DC) 110 V (DC)
Dimensions mm BH
T1
280650127
400950140
400950150
4001580150
280650127
400950140
400950150
4001580150
Specific thermal output 27 W/K 47 W/K 66 W/K 98 W/K 27 W/K 47 W/K 66 W/K 98 W/K
Max. rated current per fan 2.7 A 7.5 A 10.5 A 9.2 A 2.7 A 1.9 A 2.47 A 2.3 A
Output per fan 65 W 180 W 240 W 220 W 65 W 203 W 256 W 230 W
Air throughput of fans External circuit 360 m3/h 560 m3/h 1055 m3/h 1125 m3/h 360 m3/h 560 m3/h 1055 m3/h 1125 m3/h
Internal circuit 360 m3/h 560 m3/h 1055 m3/h 1125 m3/h 360 m3/h 560 m3/h 1055 m3/h 1125 m3/h
Temperature range –5°C to +55°C
Weight 10 kg 16 kg 18 kg 25 kg 12.5 kg 18.5 kg 20.5 kg 27.5 kg
Colour RAL 7035
Protection category to EN 60 529 Internal circuit IP 54
Accessories Packs of
Adjustable frame 1 3286.260 3286.270 3286.270 3286.280 3286.260 3286.270 3286.270 3286.280 48
Metal filters 1 3286.230 3286.240 3286.240 3286.250 3286.230 3286.240 3286.240 3286.250 49
Delivery times available on request. We reserve the right to make technical modifications. 1) Partial installation is only supported with an adjustable frame (see accessories).
The requirement for using air/air
heat exchangers is that the ambient temperature must be below the required enclosure internal tempe-rature. Dust and any aggressive ambient air is unable to ingress the enclosure, thanks to the two sepa-rate air circuits. Contamination of the outer circuit witih coarse dust can be reduced via the use of optional metal filters. Attachment options: External moun-ting, internal mounting, partial inter-nal mounting via a special moun-ting frame.Rittal Innovations 2008/System Climate Control
Rittal Innovations 2008/System Climate Control
Ex overpressure enclosu
re with integral enclosure cooling unit for zone II (gas)Ex-proof climate control systems
For zone II (gas), ex overpressure enclosures with cli-mate control sytem provide protection for high-tech moni-toring systems in the oil and gas extraction industry.
These days, high-tech monitoring systems have become a permanent feature in almost every sector. The technical chal-lenge faced by enclosure and climate control technology in
these applications is the potentially explosive zone II (gas), such as that occurring in areas of the oil and gas extracting industry. A compact cooling performance of 3.3 kW (L 35/L 35) is ensured, thanks to a system developed especially for poten-tially explosive areas.
Ex-
pro
of
clim
ate
con
tro
l sys
tem
s
37
The compressed air connection inclu-ding control unit integrated into the enclosure ensures a constant over-pressure (2 mbar). This produces an ex-free zone in the enclosure interior.
The design challenge with this type of climate control technology is to arrange the external air circuit with all the components of the cooling circuit in such a way that effective cooling output is provided, while at the same time meeting the Ex-proof require-ments for zone II (gas).
Other information available on request.
En
clo
sure
hea
ters
Enclosure heatersFeatures
38
Especially with outdoor siting, but also indoors, conden-
sation poses a particular risk for control electronics.
A range of output categories ensures that the correct
thermal output is always available. In this way, the total
required thermal output can be distributed with com-
plete accuracy within an enclosure.
Mounting
Fast assemblyThis is achieved either using snap-fastening on 35 mm support rails EN 50 022 . . .
. . . or screw-fastening directly onto the mounting plate.
Function
Fully wired unit ready for connection Clamp-type terminal connection for simple, effective wiring.
Energy-optimised design using CFDOutput categories: ● without fan 10, 20, 30, 50, 75,
100, 150 watts● with fan 250, 400, 800 watts.
High level of energy efficiency thanks to self-regulating PTC technology.
Benefits:● Large output range with a
continuous thermal output from 10 to 800 watts.
● High level of energy effi-ciency thanks to self-regu-lating PTC technology.
● Quick-assembly and connec-tion system saves time and money by eliminating super-fluous screw terminals.
● Vertical level control for opti-mum spacing e.g. from cable ducts.
Important:● For the correct temperature
and to avoid condensation, use a thermostat and/or hygrostat – see Cat. 32, page 715.
● For units in the superior out-put categories, the thermal output is increased with inte-gral fans.
● Heaters should always be installed in an upright posi-tion. Leave a distance of 50 mm at the top and bottom to allow convection.
● Heat is distributed evenly in large enclosures by using several low-output heaters.
Rittal Innovations 2008/System Climate Control
Rittal Innovations 2008/System Climate Control
Continuous thermal output 10 – 800 W
Enclosure heaters
B = WidthT = Depth
Su
pply includes:Ready-to-install unit with clamp-type terminal connectionNote: ● Thermostat SK 3110.000 (see
accessories) is recommen-ded for precise temperature control in the enclosure.
● In order to prevent condensa-tion on assemblies, hygrostat SK 3118.000 (see accesso-ries) is recommended to regu-late heating.
● In larger enclosures, even heat distribution is best achie-ved by installing several low-output heaters.
● The installation of heaters is generally advisable, even when using heat exchangers and cooling units, in order to prevent condensation.
En
clo
sure
hea
ters
Enclosure heaters with fan
Enclosure heaters without fan
Model No. SK 3105.110 3106.120 3115.130 3116.140 3107.150 3107.160 3102.170
Dimensions mmWHD
70 123 47
7017347
9315560
9321580
13521580
13523580
19525080
Rated operating voltage V/Hz 110 – 240 V AC/DC
Continuous thermal output at Tu = 10°C 10 W 20 W 30 W 50 W 75 W 100 W 150 W
Pre-fuse T 2 A 4 A
Accessories Packs of
Cat. 32, page
Thermostat 1 3110.000 715
Hygrostat 1 3118.000 715
Temperature indicator 1 3114.100 714
Special voltages available on request. We reserve the right to make technical modifications.
Model No. SK 110 V 3105.210 3105.220 3105.230
Model No. SK 230 V 3105.180 3105.190 3105.200
Dimensions mmWHD
13517096
13517096
13517096
Rated operating voltage V/Hz 110 or 240 V AC/DC
Continuous thermal output at Tu = 10°C 250 W1) 400 W1) 800 W1)
Pre-fuse gG for 110 V 4 A 6 A 10 A
Pre-fuse gG for 230 V 4 A 6 A 6 A
Accessories Packs of
Cat. 32, page
Thermostat 1 3110.000 715
Hygrostat 1 3118.000 715
Temperature indicator 1 3114.100 714 1) Output with fan. Special voltages available on request. We reserve the right to make technical modifications.
39
CR
AC
sys
tem
s
CRAC systemsUseful cooling output 18 – 11
8 kWBT
H
B = WidthT = Depth
Fu
nctional principle: The CRAC system draws warm waste air from the top of your data centre, cools it either with water or refrigerant in a closed heat exchanger, and blows the cooled, filtered supply air into the raised floor with overpres-sure.Equipment: User-friendly, high-quality cont-rol with an extensive range of functions and connectivity. Space-saving, readily acces-sible, high-efficiency fan. Flow and energy-optimised special heat exchanger with a generous safety factor.
Colour:RAL 7035
Benefits: ● The unit is available in a
broad output range, and for a variety of cooling media.
● The unit supports optimum integration of both hardware and software.
● Optimum energy and space efficiency thanks to intelligent design features, such as the slanted heat exchanger and base-integrated fan.
● Frame based on the popular TS 8 system.
Model No. SK Without heater 3301.620 3301.660 3301.830 3301.870 3300.510 3300.560 3300.710 3300.760
Model No. SK With heater 3301.630 3301.670 3301.840 3301.880 3300.520 3300.570 3300.720 3300.770
Model No. SK With dampening 3301.640 3301.680 3301.850 3301.890 3300.530 3300.580 3300.730 3300.780
Model No. SK With heater and dampening 3301.650 3301.690 3301.860 3301.990 3300.540 3300.590 3300.740 3300.790
40 Rittal Innovations 2008/System Climate Control
Useful cooling output1) 23 kW 39 kW 78 kW 118 kW 18 kW 30 kW 43 kW 54 kW
Operating voltage V/Hz 400/50 400/50 400/50 400/50 400/50 400/50 400/50 400/50
Dimensions mmWHD
1100 1950 650
1100 1950 850
1800 1950850
2600 1950 850
11001950850
11001950850
14001950850
18001950850
Cooling medium Water2) Refrigerant R407C2)
Volumetric airflow at an external pressure loss of 20 Pa 6000 m3/h 11000 m3/h 22000 m3/h 33000 m3/h 6000 m3/h 8500 m3/h 12500 m3/h 16000 m3/h
No. of fans 1 1 2 3 1 1 1 2
Power consumption of fans 0.6 kW 1.5 kW 3.0 kW 4.6 kW 0.6 kW 0.9 kW 1.8 kW 1.7 kW
Start-up current of fans 1.8 A 4.6 A 9.2 A 13.8 A 1.8 A 4.6 A 4.6 A 9.2 A
Max. speed 1150 rpm 1200 rpm 1200 rpm 1200 rpm 1150 rpm 1200 rpm 1200 rpm 1200 rpm
No. of compressors – 1 2 3 3
Power consumption of compressors – 5 kW 8.8 kW 13.1 kW 15 kW
Start-up current of compressors – 13.1 A 25.6 A 38.4 A 39.3 A
Type of connection Terminal strip –
Weight 300 kg 360 kg 550 kg 770 kg 455 kg 505 kg 585 kg 935 kg
Noise output 75 dB (A) 79 dB (A) 82 dB (A) 84 dB (A) 74 dB (A) 74 dB (A) 81 dB (A) 76 dB (A)
Filter quality to DIN EN 779 G4 G41) Output figures less heat from the fans.
CW: 26°C/45 % air inlet and 10°C/15°C water temperatures DX: 26°C/45 % air inlet and 50°C condensation temperature2) Other media available on request. Other options available on request. We reserve the right to make technical modifications.
Rittal Innovations 2008/System Climate Control
Cold aisle containment
1200
2000
600/800
FuRit
co
nta
inm
ent
nctional principle: tal cold aisle containment is
a combination of door and roof components which facilitate consistent separation of the hot and cold air in the data centre. Such separation is elementary when it comes to saving energy and increasing the efficiency of the available climate control technology. It is the cold air that determines whether your equip-ment is at its best in the enclosu-res.
With this in mind, Rittal has deli-berately chosen to focus on this aspect, and to route cold air selectively to the equipment.
Equipment: Slimline door element with view-ing window. Stable roof components in a composite metal with a high level of light permeability. Where required, safety glass may also be used.
Benefits: ● No significant increase in fire
load thanks to the use of genuine glass (toughened safety glass).
● Increased energy efficiency and performance capability of climate control.
● Superior output density is faci-litated, thanks to guaranteed cold air supply.
● Easily installed and retrofit-ted, as it is fully compatible with the TS 8 enclosure sys-tem.
● An inexpensive way to boost the performance of your exis-ting plant, lengthening the investment cycle until a replacement needs to be purchased.
Note:Other size variants and individu-ally modified systems available on request.
Co
ld a
isle
Model No. SK roof element 3300.170 3300.180 –
Model No. SK door element – – 3300.160
Width of element (identical to enclosure width), mm 600 800 –
Width of cold aisle mm 1200 1200 1200
Height of cold aisle mm – – 2000
41
LC
P In
line
LCP InlineUseful cooling output u
p to 30 kWT1B
H
B
H
T1T2
B = WidthT = Depth
FunctionaThe LCP Insiting withisuite. The hfrom the rothe rear of blown out faisle, wheryour IT equThe LCP Inmum perfociency in ccold aisle cproduct, a necessary.
l principle: line is designed for
n a bayed enclosure ot air is extracted
om or warm aisle at the unit, cooled, then orwards into the cold e it is available to ipment. line achieves maxi-rmance and effi-onjunction with Rittal ontainment. With this raised floor is not
Equipment: High-performance heat exchan-ger with very even temperature distribution. Integrated condensate manage-ment. Controller with networking capa-bility, compatible with all com-mon communication standards (SNMP, Bacnet etc.).
Benefits: ● Combines the slimline design
of the LCP with the function of room air-conditioning.
● Climate control technology, specially designed for IT envi-ronments with comprehen-sive monitoring functions.
● Frame based on the popular TS 8 system.
Model No. SK 3301.470
Rated operating voltage V/Hz 230 V, 1~, 50/60 Hz400 V, 3~, 50/60 Hz
Dimensions mmBH
T1
30020001200
Usable U Optional front cover T2
Useful cooling output up to 30 kW2)
Rated current 9.3 A/10.4 A
Pre-fuse 16 A/16 A
Power consumption Pel Max. 1800 W/2550 W
Cooling medium Water1)
Permissible operating pressure p. max. 5 bar
Duty cycle 100 %
Electrical connection Jack
Water connection 1˝ external thread
Weight 230 kg
Colour RAL 7035
Temperature control Via integral controller
Max. air throughput 4600/4300 m3/h 1) Water quality according to unit specifications. 2) Achievable with 15°C cold water inlet temperature, volumetric flow 35 l/min and air inlet temperature in server enclosure 25°C.
42 Rittal Innovations 2008/System Climate Control
Front cover The optional front cover, together with the built-in filter fleece, ensures an even air outlet at the sides as well, and reduces the air outlet speed, thus minimising draught effects.
Packs of Model No. SK
1 3301.980
Useful cooling output up to 20 kW
LCP Modular
LC
P M
od
ula
r
TB
H
B = WidthT = Depth
Control
Touchscreen display The display offers the opportu-nity of directly monitoring key functions of the LCP Modular, and implementing settings.
Packs of Model No. SK
1 3301.790
43
Cooling moduleThe cooling module allows the useful cooling output of the LCP Modular to be increased in 7 kW increments. There is 1 module fitted as standard.
Packs of Model No. SK
1 3301.290
FuLC
nctional principle: P Modular draws in the air at
the sides of the server enclos-ure rear, cools it using high-per-formance compact registers, and blasts the cooled air back into the front part of the server enclosure at the sides.
The device has a modular struc-ture, so that the useful cooling output may be adapted to your requirements in three stages. The cooling modules may be installed and removed with the system operational.
Benefits: ● High energy efficiency ● Scalable output thanks to
modular system modules. ● Bayable with server/network
enclosures based on TS 8 (H 2000, D 1000).
● Fans may be individually exchanged with the system operational, self-contacting.
● Basic CMC as standard. ● Touchscreen display may be
retrofitted. ● Shorter service times.
● Extended functionality of the monitoring and control tech-nology/software.
● Optimum adaptability thanks to dynamic, continuous cont-rol of the cold water volume flow.
● Control of the inlet air tempe-rature and the temperature difference for the best pos-sible supply to your server systems.
● Central condensate manage-ment
Available from November 2008.
Model No. SK 3301.460
Number of preassembled cooling modules 1
Rated operating voltage V/Hz 200 – 230 V, 1~, 50/60 Hz 400 V, 3~, 50/60 Hz
Dimensions mmWHD
30020001000
Usable U
Useful cooling output up to 20 kW1)
Pre-fuse 10 A
Power consumption Pel Max. 600 W
Cooling medium Water
Permissible operating pressure p. max. 5 bar
Duty cycle 100 %
Electrical connection Jack
Water connection 1˝ external thread
Weight 230 kg
Colour RAL 7035
Temperature control Via integral controller
Max. air throughput 3000 m3/h 1) Design example with 6°C water inlet temperature and 45 l/min volumetric flow. At 15°C a cooling output of 15 kW is achievable.
For full installation with 3 cooling modules.
Rittal Innovations 2008/System Climate
Rec
oo
ling
sys
tem
s
44
Recooling sysChiller for IT cooling, c
temsooling output 15000 to 123000 W
T
H
B B = WidthT = Depth
Ap
plication: Especially for cooling IT applica-tions, such as LCP or air/water heat exchangers. Safety-rele-vant features such as redun-dant speed-controlled pumps, compressors or buffer stores are the distinguishing features of these atmospherically sealed systems.Technical design: ● Compact design with control
components in the front and air intake via both side panels, air outlet upwards.
● Pressure-sealed system. ● Digital thermostat for tempera-
ture control with setpoint and actual value display.
● Monitoring interface with Rittal CMC-TC supported.
● Integral automatic bypass valve.
● Flow monitor.
Supply includes:Chiller wired ready for connec-tion, with multilingual docu-mentation including functional diagram and wiring plans.
Options: ● Free cooling. ● Please follow the instructions! ● Buffer store for separate
siting. ● Emergency cooling with
mains water infeed. ● Special voltages.
Note:The illustration shows a unit with customer-specific options. Technical deviations in terms of cooling output, dimensions or weight are possible for unit types with free cooling.
Layout diagram, see page 102.
Model No. SK 3232.700 3232.710 3232.720 3232.730 3232.740 3232.750 3232.760 3232.770 3232.780 3232.790
Rated operating voltage V/Hz 400, 3~, 50
Dimensions mmWHD
8151400 1560
8151400 1560
8151400 1560
100021802000
110016062450
110016062450
110016062450
110016062950
110018752950
110018752950
Cooling output at Tw = 15°C/Tu = 32°C 15000 W 23700 W 35500 W 48500 W 61000 W 72000 W 82000 W 92000 W 113000 W 123000 W
Power consumption 6900 W 9700 W 14600 W 21000 W 21400 W 24400 W 27500 W 31100 W 38900 W 42600 W
Rated current max. 23.0 A 25.0 A 37.0 A 46.5 A 71.2 A 74.2 A 77.2 A 83.2 A 106.1 A 112.1 A
Refrigerant R407C
Pmax. cooling circuit 28 bar
Temperature rangeEnvironment –20°C to +43°C
Liquid media +5°C to +15°C
Pump capacity 60 l/min. 120 l/min. 240 l/min. 500 l/min.
Pump pressure 2.5 bar
Number of cooling circuits 1 2
Tank with 10 mm condensate insulation Steel
Tank capacity 48 l 100 l 300 l 500 l
Water connections 1˝ 1 1/4˝ 2 ˝ 2 1/2˝
Operating weight 375 kg 390 kg 480 kg 710 kg 810 kg 849 kg 864 kg 949 kg 1150 kg 1175 kg
Colour RAL 7035 RAL 9002
Protection category (electrics) IP 54
Air throughput of fans m3/h 10880 14000 18000 13720 20450 27300 37500
Temperature control Electronic control with digital display, setting range +10°C to +20°C (factory setting +15°C)
Delivery times available on request. We reserve the right to make technical modifications. Cooling output makes allowance for 35 % glycol.
Rittal Innovations 2008/System Climate Control
Rittal Innovations 2008/System Climate
Recooling systemsChiller for IT cooling, cooling output 145000 to 462000 W
T
H
B B = WidthT = Depth
Ap
plication: Especially for cooling IT applica-tions, such as LCP or air/water heat exchangers. Safety-rele-vant features such as redun-dant speed-controlled pumps, compressors or buffer stores are the distinguishing features of these atmospherically sealed systems.Technical design: ● Compact design with control
components in the front and air intake via both side panels, air outlet upwards.
● Pressure-sealed system. ● Digital thermostat for tempe-
rature control with setpoint and actual value display.
● Monitoring interface with Rittal CMC-TC supported.
● Integral automatic bypass valve.
● Flow monitor.
Supply includes:Chiller wired ready for connec-tion, with multilingual docu-mentation including functional diagram and wiring plans.
Options: ● Free cooling. Please follow the
instructions! ● Buffer store for separate siting ● Emergency cooling with
mains water infeed ● Special voltages
Note:The illustration shows a custo-mised unit design up to 180 kW. Technical deviations in terms of cooling output, dimensions or weight are possible for unit types with free cooling.
Layout diagram, see page 102.
Rec
oo
ling
sys
tem
s
Model No. SK 3232.800 3232.810 3232.820 3232.830 3232.840 3232.850 3232.860 3232.870 3232.880
Rated operating voltage V/Hz 400, 3~, 50
Dimensions mmWHD
110018752950
110018752950
110018753950
220024503400
220024503400
220024503400
220024504250
220024504250
220024504250
Cooling output at Tw = 15°C/Tu = 32°C 145000 W 161000 W 193000 W 248000 W 280000 W 312000 W 372000 W 415000 W 462000 W
Power consumption 50900 W 57600 W 63700 W 89100 W 97300 W 105400 W 138000 W 148200 W 158400 W
Rated current max. 141.1 A 153.1 A 153.1 A 208.1 A 227.1 A 245.1 A 311.0 A 339.0 A 366.0 A
Refrigerant R407C
Pmax. cooling circuit 28 bar
Temperature rangeEnvironment –20°C to +43°C
Liquid media +5°C to +15°C
Pump capacity 500 l/min. 810 l/min. 1200 l/min.
Pump pressure 2.5 bar
Number of cooling circuits 2
Tank with 10 mm condensate insulation Steel
Tank capacity 500 l 700 l 1000 l
Water connections 2 1/2˝ 3˝ 4˝
Operating weight 1250 kg 1340 kg 1520 kg 2702 kg 2795 kg 2831 kg 3460 kg 3567 kg 3667 kg
Colour RAL 9002
Protection category (electrics) IP 54
Air throughput of fans m3/h 37500 35500 34600 86000 83000 80000 126000 120500 115000
Temperature control Electronic control with digital display, setting range +10°C to +20°C (factory setting +15°C)
Delivery times available on request. Technical modifications reserved. Cooling output makes allowance for 35 % glycol.
45Control
Pip
ing
sys
tem
s in
th
e d
ata
cen
tre
Piping systems in
the data centreEfficient cooling solutions rely on an excellent infra-
structure. The Rittal piping system provides the link
between the equipment and the refrigeration system.
An optimum design and targeted media supply ensure
efficient operation of all cooling components. This also
includes safety-relevant options such as redundant
pumps, emergency cooling or buffer stores.
ittal Innovations 2008/System Climate Control
46Speed-controlled pumps are used to convey the coolant. The pumped volume may be varied by using state-of-the-art EC motors.
Your practical benefit: Lower energy consumption thanks to “cold water on demand”. Only the volume of water that is actually nee-ded for cooling is moved through the system.
R
The standard hydraulic layout includes the use of a hydraulic separating filter. Different volumes of water on the producer side and equipment side for process cooling do not adversely affect the function of the cooling systems.
Your practical benefit: Less energy consumption thanks to the use of free-cooling heat exchangers including redun-dancy. Chiller pumps may be switched on and off as required.
Use of compact distributors to distri-bute the cooling medium among diffe-rent pieces of equipment.
Your practical benefit: Redundancies in the supply lines to the equipment may be designed as required. For example, a layout can be designed to facilitate the automa-tic shut off of sub-trains in the event of pipe leaks.
Piping systems in the data centre
● Pipeline systems are part of a turnkey solution for the targeted cooling of IT operating environments
● Media network for the connection of coolers (IT chillers) and cooling equipment (liquid cooling package and CRAC systems)
● Free scalability of chiller and equipment output via the hydraulic separation of the producer and equipment sides
● Use of a hydraulic separating filter with dual function as a buffer store
● Maximum energy efficiency thanks to the use of polypropylene piping with exceptionally low pipe friction losses
● Systems are suitable for the use of cold water and water/anti-freeze mixtures (glycol)
● Media pumping redundancy by fitting every chiller with its own primary pump and via the use of redundant main pumps on the equipment side
47
1 2
4
3
7
5 6
Rittal Innovations 2008/System Climate Control
The innovative polypropylene piping is distinguished by minimal pipe friction resis-tance.
Your practical benefit: Less energy consumption for conveying the cooling medium, thanks to lower flow resistance. The material is corrosionresistant and may be machined without residues.
Direct cooling systems (e.g. LCP)
CRAC systems
IT chiller
Buffer store
1
2
3
4
Dirt collector station with maintenance bypass
Main pump (redundant)
Compact distributor with lockable outlets
5
6
7
Acc
esso
ries
for
syst
em c
limat
e co
ntr
ol
Accessories for syste
m climate control48 Rittal Innovations 2008/System Climate Control
Adjustable framefor air/air heat exchangers, railway-proof version
The adjustable frame allows variable partial instal-lation of air/air heat exchangers on enclosures, thereby facilitating optimum space utilisation.
Material:Sheet steel
Colour:RAL 7035
For heat exchangers Model No. SK
SK 3126.4XX 3286.260
SK 3128.4XX/SK 3129.4XX 3286.270
SK 3130.4XX 3286.280
Adaptor framefor wall-mounted cooling units
To approximate the rear tilt of the TP consoles.
Material:Sheet steel
Surface finish:Powder-coated in textured RAL 7035
Supply includes:Assembly parts.
245
167 481
77.520020077.5
20
329
8484
201
277
Ø7
Mounting cut-out
Top edge of console
Adaptor frame
Cooling units SK 3302.3X0
1
2
3
2
3
1
For cooling units 300 W Cat. 32,
pagePacks
ofModel No.
TPModel No. SK
3302.3X0 642 1 6730.600
Delivery times available on request.
Accessories for system climate control
Acc
esso
ries
for
syst
em c
limat
e co
ntr
ol
Wide-range power pack 24 V (DC) for SK 3201.300
To supply voltage to the thermoelectric cooler with primary 110 – 230 V (AC) voltage supply input. Power packs for other outputs available on request.
Power pack 24 V (DC) for SK 3201.300 Model No. SK
150 W for snap-mounting onto top-hat rail 35 mm 3201.030
Metal filterParticularly when climate control systems are used in dusty and oil-laden environments, it is advisable to use washable metal filters. If air or steam condenses on the metal surfaces, any par-ticles present will adhere to the metal, and can easily be washed out with water or grease-dissolving solvents.
Material:Aluminium
For heat exchangers
W x H x D mm
Packs of Model No. SK
SK 3126.4XX 130 x 130 x 10 1 3286.230
SK 3128.4XX/SK 3129.4XX 208 x 208 x 10 1 3286.240
SK 3130.4XX 225 x 225 x 10 1 3286.250
Filter matRittal thermoelectric coolers are low-maintenance. Filter mats may be used if operating under extreme conditions.
Material:Fibre fleece, self-extinguishing F1 to DIN 53 438. Temperature-resistant to 100°C.
For thermoelectric
cooler
W x H x D mm
Packs of
Model No. SK
SK 3201.200/SK 3201.300 115 x 85 x 10 5 3201.050
Rittal Innovations 2008/System Climate C
49ontrolNet
wo
rkin
g
50
NetworWall-moun
kingted enclosure, based on Rittal QuickBox, 12/15 U, Ergoform-S lock system
H2
T2B2
H1
T1 B1
With
Ergoform-S lock system, suitable for the installation of semi-cylinders with an overall length of 40 or 45 mm (to DIN 18 252), lock and push-button inserts. Fitted as stand-ard with 3524 E lock insert. ● The unlocked handle foldsdown forwards, and the lock is opened by swivelling.
● For wall-mounting with left-hand door hinge, the handle system may be fitted rotated through 180°.
● Internal cover lock, accessi-ble when the door is open.
Material:Wall mounting plate with mounting brackets: 2.0 mm sheet steel Enclosure cover: 1.0 mm sheet steel Door: Glazed door with sheet steel frame and 3 mm tough-ened safety glass
Surface finish:Enclosure: Powder-coated, RAL 7035
Supply includes:Wall section: Pre-assembled mounting bracket, cable clamp rail top and bottom, 482.6 mm (19˝) punched rails, infinitely depth-variable.
Enclosure cover: consisting of base and cover tray with vent slots, brush strip for cable entry at the top/bottom, glazed door with Ergoform-S handle and security lock.
Property rights: German patent no. 198 11 711 European patent no. 1 064 709 with validity for BE, ES, FR, GB, IT, NL, SE Taiwanese patent no. NI 123 288 Russian patent no. 2190912 Australian patent no. 733078 South Korean patent no. 10-0375062 US patent no. 6,435,364
Detailed drawing, available on the Internet.
U Packs of 12 15 Cat. 32, page
Enclosure cover
Width (B1) mm 600 600
Height (H1) mm 628 762
Depth (T1) mm 600 600
Wall section
Width (B2) mm 595 595
Height (H2) mm 621 755
Max. installation depth (T2) mm 547 547
Model No. DK 1 7502.436 7502.446
Accessories
Mounting angles, 482.6 mm (19˝) 2 7502.203 7502.204 1092
Solid gland plate 2 7502.3101) 7502.3101) 1052
Wall mounting bracket, 10 mm 4 2508.010 2508.010 975
Wall mounting bracket, 40 mm 4 2503.010 2503.010 975
Combination rails for enclosure width 6 7502.304 7502.304 1063
Combination rails for enclosure depth 500/600 mm 6 7502.304 7502.304 1063
Slide rails for enclosure depth 500/600 mm 2 7492.400 7492.400 1098
Earthing set 1 7502.260 7502.260 10361) Delivery times available on request.
Semi-cylinder to DIN 18 252. Model No. see Cat. 32, page 957.
Rittal Innovations 2008/IT Solutions
Lock and push-button inserts Model No. see Cat. 32, page 947, 948.
T
Based on Rittal TS 8, pre-configured, heavy duty
Server racks
B
H
MaSh
Design features: ● Firmly linked, reinforced
frame based on the popular TS 8 system
● High load-bearing capacity of up to 1300 kg including castors, distributed over both 482.6 mm (19˝) levels
● Stable transport castors pro-vide mobility, even while removed
● Static and dynamic proper-ties meet the stringent requirements of leading server manufacturers
● Designer front door, rear door vertically divided, shortened at the bottom on one side for cable entry
● Comfort handle for semi-cylinder front and rear, with security lock 3524 E
● Optimised airflow thanks to large-scale ventilation
● Open surface area 78 % ● Horizontally divided side
panels● Levelling feet adjustable from
the inside ● Pull-out stabilisers for stabil-
ity during assembly and maintenance work
● Bayable
>
terial:eet steel
Surface finish:Enclosure frame: Dipcoat-primed Enclosure panels: Dipcoat-primed, powder-coated
Colour:RAL 9005/7035
Supply includes:Enclosure frame TS 8, roof plate for cable entry, sheet steel doors front and rear, vented, with 130° hinges, comfort handles with security lock, side panels horizontally divided (DK 7831.820, 7831.825 only),
L-shaped 482.6 mm (19˝) mounting angles, depth-variably mounted, stabilisers, transport castors, levelling feet. 10 cable shunting rings, 50 cage nuts M6 and screws M6 x 16 mm supplied loose.
Detailed drawing, available on the Internet.
Ser
ver
rack
s
51Rittal Innovations 2008/IT Solutions
U 42
Width (B) mm1) 600
Height (H) mm1) 2000
Depth (T) mm1) 1200
Model No. DK with divided side panels
RAL 9005 7831.8202)
RAL 7035 7831.8252)
Model No. DK as a bayed enclosure without side panels
RAL 9005 7831.8222)
RAL 7035 7831.8272)
Doors
Designer door, vented, front �
Sheet steel door, vented, rear, vertically divided, one side shortened for cable entry �
Comfort handle with security lock, front and rear �
Roof
Roof plate for cable entry �
Base
4 castors (2 of them steerable) �
Stabiliser, pull-out �
Levelling feet �
Open base, without base frame �
Interior installation
482.6 mm (19˝) levels, front and rear �
L-shaped mounting angles, reinforced, mounted on horizontal support rails �
Panel earthing, fitted �
Accessories
10 cable shunting rings �
50 captive nuts M6, conductive �
50 multi-tooth screws M6 x 16 with plastic washers �
Slide rails, depth-variable, 590 – 930 mm, load capacity 150 kg 7063.884
482.6 mm (19˝) component shelf, D = 700 mm, load capacity 100 kg, RAL 9005 7063.837
482.6 mm (19˝) component shelf, D = 700 mm, load capacity 100 kg, RAL 7035 7063.897
Installation kit depth-variable 706 – 1006 mm for 482.6 mm (19˝) component shelf 100 kg 7063.890
Telescopic slides for component shelf DK 7063.837/DK 7063.897 7066.700
Cable support, hinged, with anti-kink guard 7163.565
For more accessories, refer to Rittal Catalogue 32.
� Included with the supply. 1) All sizes are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 2) Delivery times available on request.
Ser
ver
rack
s
Server racksBased on Rittal TS 8, pre-con
52
figured
T
H
B
1
Material:
Design features: ● Robust frame structure● Front and rear door fully
vented; 180° hinges; free vented surface area > 78 % in the perforated plate part
● 4-point locking● Door hinge may be swapped
to opposite side● Cable entry via the roof and
base● Bayable at all levels● Static load capacity of up to
1000 kg
Sheet steel
Surface finish:Enclosure frame: Dipcoat-primed Enclosure panels: Dipcoat-primed, powder-coated in RAL 7035 or RAL 9005 482.6 mm (19˝) mounting frame: Zinc-plated, passivated
Supply includes:Enclosure frame TS 8 with sheet steel doors, one-piece vented at front, vertically divided vented at rear, levelling feet, both sides comfort handle with security lock 3524 E and 4-point locking.
Enclosure panel earthing already prefitted. Two-piece roof plate, with sliding plate and rubber cable clamp strip for cable entry. Without or with side panels in colours RAL 7035/RAL 9005.
Detailed drawing, available on the Internet.
Optimised air flow. Open surface area > 78 % perforated.
1
Number of front doors 1 1 1 1
No. of rear doors 2 (vertically divided)
2 (vertically divided)
2 (vertically divided)
2 (vertically divided)
U 42 42 42 42
Width (B) mm 800 800 800 800
Height (H) mm 2000 2000 2000 2000
Depth (T) mm 1200 1200 1200 1200
Model No. DK 7831.730 7831.732 7831.7401) 7831.7421)
RAL colour 7035 7035 9005 9005
Doors
Sheet steel doors, vented, front and rear2) � � � �
Plug-in side panels with T lock � – � –
Roof
Roof plate, two-piece with rubber cable clamp strip for cable entry � � � �
Base
Open base, without base frame � � � �
Levelling feet � � � �
Interior installation
482.6 mm (19˝) level, front and rear � � � �
L-shaped mounting angles
Mounting angles attached to depth stays
482.6 mm (19˝) mounting frames, front and rear � � � �
Load capacity 1000 kg, static � � � �
Panel earthing, fitted � � � �
Accessories
Security lock for side panels 7824.500 7824.500 7824.500 7824.500
Base/plinth components, front and rear, solid 8601.805 8601.805 8601.802 8601.802
Base/plinth trims 8601.025 8601.025 8601.026 8601.026
Base attachment bracket 8800.210 8800.210 8800.210 8800.210
Stabiliser, pull-out 7825.260 7825.260 7825.260 7825.260
� Included with the supply. 1) Delivery times available on request 2) Vented surface area > 78 % perforated.
Rittal Innovations 2008/IT Solutions
Rittal Innovations 2008/IT Solutions
UPS, Rittal Modular Power Concept – PMC 800
Power
Po
wer
Maximum availability and performance in a modular design!
Rittal PMC 800 is the solution for data centres with a high
power consumption. The modular architecture allows opti-
mum, tailored configuration of the UPS. The decentralised
parallel architecture (DPA) ensures that no single point of
failure influences availability of the UPS.
The UPS modules are divided into a control module and
a power module. The transformerless double conversion
architecture ensures a high level of efficiency. Every UPS
module has a separate static bypass and a display, together
with the control electronics and processor.
The PMC 800 has a classification code VFI-SS-111.
The modular design facilitates energy-efficient installation
with minimum operating costs, which may be extended as
and when required. The PMC 800 may be extended to
accommodate up to 10 modules, facilitating a maximum
output of up to 800 kW or 720 kW (N+1), redundant.
If a UPS with a higher output is required, this can of course
be achieved with the PMC 800.
Dividing the modules into a power module and a control module makes them very service-friendly, and sets them apart from other UPS systems in this output category. The service-friendliness of the UPS means that maintenance work may be precisely planned. This provides the basis for maximum availability plus maximum protection of your investment.
Like Rittal’s other three-phase PMC UPS systems, the UPS may be extended with the system opera-tional. This safe swap technology means that UPS modules may be exchanged or the UPS extended while in inverter mode. In a redundant configura-tion of the UPS, the load remains supplied with UPS power while a module is being exchanged. This ensures maximum availability of the con-nected infrastructure.
Rittal PMC 800 at a glance: ● Topology: On-line, double conversion, VFI● Technology: Transformerless● Architecture: Modular, may be connected
in parallel● Maximum output in standard configuration:
800 kW (higher outputs available on request)● Efficiency at 25/50/75/100 % load
(cos phi = 0.8): 92/93.5/95/95 %
● Input power factor: 0.98● Admissible load imbalance: 100 %● No network impacts with load imbalance● Input voltage tolerance: up to –40 %/+15 %● Distortion factor, output: < ±3 %
53
PowerP
ow
er
Technical specifications
54 Rittal Innovations 2008/IT Solutions
1. Rectifier data
Module type 64 80
Power output kVA 80 100
Power output kW 64 80
Nominal input voltage V 3 x 380/220 V+N, 3 x 400/230 V+N, 3 x 415/240 V+N
Input voltage tolerance(3 x 400 V)
Load < 100 % (–23 %, +15 %)< 80 % (–30 %, +15 %)< 60 % (–40 %, +15 %)
Input frequency Hz 35 – 70
Power factor, input 0.98
Start-up current A Limited by soft start/max. IN
Distortion factor, THDI 7 – 9 % at 100 % load
Input power with charged battery and rated output kW 69 86
Input power with battery charging and rated output kW 75 93
2. Battery data
Maximum charging current A 16
Battery performance curve Ripple free; IU (DIN 41 773)
Number of batteries 40 – 50
Battery type Pb and NiCd
Battery test Automatic and periodic
Temperature-controlled battery charging Standard (temperature sensor optional)
3. Inverter data
Module type 64 80
Power output per module kVA 80 100
Power output per module kW 64 80
Output voltage V 3 x 380/220 V, 3 x 400/230 V, 3 x 415/240 V
Output power factor 1
Output voltage tolerance, static < ±1 %
Output voltage tolerance, dynamic < ±4 %
Distortion factor with linear load < ±2 %
Distortion factor with non-linear load (EN 62 040-3: 2001) < ±3 %
Admissible load imbalance 100 %
Output voltage form Sinusoid
Output frequency Hz 50 or 60
Output frequency tolerance, asynchronous ±0.1 %
Output frequency tolerance, synchronous ±4 %
Overload capacity 125 %: 10 min.150 %: 1 min.
Crest factor 3 : 1
5. General technical specifications
Topology On-line, double conversion, VFI
Technology Transformerless
Construction Modular, may be connected in parallel
Parallel configuration For redundancy or output increase up to 10 modules
Ambient temperature °C 0 – 40
Relative humidity Max. 95 %, non-condensing
Cooling Fan-assisted
Volume of cooling air required 1500 m3 at 25°C
Siting Min. 20 cm distance from the wall
Cabling From the front, from below
Operating ratio cos phi = 0.8 Load: 100 %, 75 %, 50 %, 25 % % 95, 95, 93,5, 92
Heat loss at 100 % load cos phi = 0.8 W 3400 4200
Weight Active module 65 kg 65 kg
Passive module 70 kg 85 kg
Dimensions (W x H x D) mm 1400 x 1900 x 870
Standards
SafetyEN 62 040-1-1: 2003
EN 60 950-1: 2001/A11: 2004EN 50,091-2: 1995
EMCEN 61 000-3-2: 2000
EN 61 000-3-3: 1995/A1: 2001 EN 61 000-6-4: 2001
Power EN 62 040-3: 2001
Rittal Innovations 2008/IT Solutions
Power
Po
wer
Battery Manager RiBat
Battery Manager RiBat Management system for the batteries in a UPS. RiBat can extend the service life of a battery by up to 30 %.
Benefits: ● Optimised charging for each individual battery. ● Temperature monitoring per battery. ● Early identification of defective batteries. ● Supports preventive maintenance of batteries. ● Defective batteries can be restored rather than
replaced before reaching the end of their use-ful life.
● Existing installations may be upgraded. ● RiBat Manager replaces the internal SNMP
card of the UPS.
The Rittal battery manager RiBat determines all relevant data such as battery voltage, internal resistance, discharge curve, temperature etc. throughout the service life of the monitored bat-teries. This data is evaluated and used to control the charging process. RiBat facilitates optimum charging of each individual battery.
The RiBat module regulates the charging process for each connected battery. This avoids over-charging of a battery which is connected to other batteries. This technology can extend the service life of a battery by up to 30 %. The RiBat modules are connected using preassembled cables and connected to the RiBat Manager. Up to 250 modules may be connected to one RiBat Manager. The RiBat module is connected to the batteries using a preassembled cable. Internal resistance is measured using an a.c. voltage, so as to avoid measurement errors. The measurements are recorded in the RiBat Manager and are available for further evaluation.
Technical specifications
RiBat Manager: Supply voltage: 9 – 30 V DC Serial interface: 3 x RS232 LAN interface: 10/100 MBit full/half Supported protocols: SNMP, RCCMD, SNMP, HTTP Alarm contact: 1 floating contact Display: LCD display Temperature range: 5°C – 45°C, 90 % humidity, non-condensing Certifications: CEE, WEEE, RoHS
RiBat module: Battery voltage: 12 V DC Battery capacity: 7 – 300 Ah W x H x D: 800 x 55 x 27 mm Certifications: CEE, WEEE, RoHS
1
2
3
4
TCP/IP
Battery Manager
Battery
Module
Designation Model No. DK
RiBat Manager 7857.800
RiBat module 7857.801
RiBat cable kit 120 batteries 7857.8021)
RiBat cable kit 150 batteries 7857.8032)
RiBat prepared for 120 batteries 7857.8041)
RiBat prepared for 150 batteries 7857.8052)
RiBat power connector cable 7857.806
RiBat communication cable 7857.807
Delivery times available on request. 1) In conjunction with a battery rack for 120 batteries2) In conjunction with a battery rack for 150 batteries
1
2
3
4
55
Po
wer
Power
IT distribution enclosure and wall-mounted distributor, PDR flex56 Rittal Innovations 2008/IT Solutions
To complement the Rittal power distribution con-cept, Rittal offers a range of pre-equipped distrib-utor racks and wall-mounted enclosures. Use of the ABB smissline system means that customer-specific requirements may be implemented par-ticularly quickly and easily. Another advantage of this future-safe system solution is the subsequent extendibility and adaptation to altered usage, without the need for lengthy interruptions to oper-ation. The distributors are supplied fully prewired with customer-specific configuration and testing.
Benefits: ● Time savings with simple planning. ● Cost reductions thanks to easy assembly. ● Pre-configured/customised installation sup-
ported. ● Faster, more flexible installation options by
simply plugging in the units. ● All products in the ABB smissline range may be
used (such as circuit-breakers from 6 A to 32 A and various tripping characteristics).
● Residual-current circuit breaker, surge voltage protector, motor circuit-breaker etc. additionally available.
IT distribution enclosure, PDR flexPre-configured low-voltage distributor for data centres TS 8 distribution enclosure, supplied prewired. The rack has a glazed door (hinge may be swapped to opposite side) with comfort handle for use of a semi-cylinder, so that customised locks may be used. Cables are routed at the side of the rack via a 200 mm wide cable chamber with 4 cable clamp rails, covered by a vertically hinged infill panel. Cable entry may be imple-mented from above with the optionally available roof plate for cable entry. The ABB smissline slots are wired to the outgoing terminals with individual wires (6 mm2) and there-fore enable the use of 32 A circuit-breakers. The installation of a network analysis system is supported, there is sufficient space available in the infeed area for the required inverters (sum + phase inverters).
Technical specifications:Infeed: 4 x NH size 00 fusible elements, N+PE bar (optional busbar up to max. 630 A) Configuration: 4 rows of 21 locations (22 HP), ABB smissline (160 A per row) Outlet: Terminal blocks
Material:Sheet steel (1.5 mm), dipcoat-primed External lock furniture: Powder-coated Glazed door: Sheet steel (2 mm) with toughened safety glass window (4 mm)
Colour:RAL 7035
Note:Matching roof plate for cable entry or cable entry gland, see Cat. 32, page 470. Other accessories, from page 461. Base/plinth components, page 893.
Dimensions mm Model No. SV
800 x 2000 x 400 without base/plinth 7857.950
Delivery times available on request.
IT wall-mounted distributor, PDR flexPre-configured sub-distributorAE wall-mounted enclosure with prefitted ABB smissline. Sub-distributor suitable for wall mount-ing (surface-mounting), prepared for the use of ABB smissline installed equipment. The door hinge may be swapped to the opposite side, and cable entry may be from the top or bottom (please specify when ordering). The sheet steel door has a double-bit lock. The ABB smissline locations are wired to the outlet terminals with individual wires (6 mm2) to facilitate the use of 32 A circuit-breakers.
Material:Sheet steel, dipcoat-primed External door furniture: Powder-coated
Colour:RAL 7035
Note:Standard double-bit lock insert, may be exchanged for lock cylinder insert, version B, see Cat. 32, page 957.
Dimensions mm Model No. SV
600 x 760 x 210 7857.910
Delivery times available on request.
Power
Po
wer
Power Distribution UnitCompact power distribution for Rittal server racksWith this compact busbar, any server rack may be retrofitted quickly and easily with a profes-sional power distribution system. Depending on the design, the infeed may be either single-phase or three-phase. Configuration and operation of the busbar (e.g. power measurement and switching the connected equipment on/off) is easily controlled via the Web interface. Access via Telnet or via a serial console is also supported. Thanks to a comprehensive user administration system, the power distribution is protected against unauthor-ised access and misuse. The connected equip-ment may be grouped together and switched jointly, but individual switching is also supported. The option of naming the individual outputs (ASCII, max. 24 characters) ensures easy opera-tion in day-to-day use. The installation kit supplied allows the busbar to be mounted on the enclosure frame and also, in the case of 800 mm wide enclosures, at the side of the 482.6 mm (19˝) level.
Material:Sheet steel, spray-finished, plastic socket inserts.
Colour:Black. Available in RAL 7035 on request.
Supply includes:Busbar, connection cable 3 m (depending on type), assembly parts.
Note:RiWatch IT is not supported.Slave module available on request.
Accessories:
Matching, preassembled server connection cables in lengths 0.5 m DK 7856.014 or 1.5 m DK 7200.215 may be ordered as accessories.
Model No. DK 7856.510 7856.520 7856.530 7856.540 7856.550
No./type of infeeds 1 x 32 A 3 x 32 A 1 x 32 A 3 x 32 A 2 x 32 A
No. of slots IEC 60 320 C13 3 x 6 3 x 6 2 x 8 3 x 8 2 x 16
No. of slots IEC 60 320 C19 3 x 2 3 x 2 – – –
Voltage measurement per phase � � � � �
Current/voltage measurement per phase � � � � �
Option of switching the slots (individually) – – � � �
Web interface (HTML, SSL v3) � � � � �
TCP/IP, DHCP, FTP, Telnet, SSH, SNMP � � � � �
Serial connection port, RS232 (RJ 45) � � � � �
Network connection 10/100 MBit (RJ 45) � � � � �
Syslog messages via e-mail or SNMP � � � � �
User rights administration/password protection (128 users) � � � � �
Group formation with switchable outputs – – � � �
Naming of outputs (max. 24 characters) � � � � �
Firmware update � � � � �
Connection cable with CEE connector (3 m, 1-phase) � – � – � (2 x)
Connection cable with CEE connector (3 m, 3-phase) – � – � –
Mains connection voltage 230 V/50 – 60 Hz
400 V/50 – 60 Hz
230 V/50 – 60 Hz
400 V/50 – 60 Hz
230 V/50 – 60 Hz
Approvals CE CE CE CE CE
Dimensions mm
Length 1755 1755 1260 1755 1270
Width 45 45 45 45 90
Depth 57 57 57 57 57
Weight (kg) 8.7 8.7 4.6 8.7 8.0
Operating temperature (°C) 0 to +40 0 to +40 0 to +40 0 to +40 0 to +40
Storage temperature (°C) –40 to +85 –40 to +85 –40 to +85 –40 to +85 –40 to +85
Ambient humidity (%, non-condensing) 10 to 90 10 to 90 10 to 90 10 to 90 10 to 90
Assembly parts (for mounting on enclosure frame) � � � � �
Rittal PDU mounting kit for easy mounting (suspension) of the PDU on the TS 8 frame section 7856.591 7856.591 7856.591 7856.591 7856.591
Rittal PDU mounting kit for easy mounting (suspension) of two PDUs on the TS 8 frame section 7856.592 7856.592 7856.592 7856.592 7856.592
Extension module (slave module) on request
� Included with the supply.
Power Distribution Unit
57Rittal Innovations 2008/IT Solutions
Po
wer
PowerPower System Module PS
58
Plug-in modules
Proce
A
B
M
TCP/IP
ssing Unit II
Power System Module PSM up to 96 A
Bar and plug-in modules Busbar shock-hazard-protected, fully wired, with two circuits, redundant, load capacity up to 48 A or 96 A respectively.Plug-in modules for busbars available in various country ver-sions. May be retrofitted whilst the system is operational.
Redundancy or higher load capacityCircuits A and B are each supplied with three phases (2 x 3 x 16 A). To change the circuit, rotate the plug-in module.
Note:Detailed information on the busbar may be found in the Cat. 32, from page 789.
With these new modules, which are compatible with the existing PSM system, it is now possible to check the current power flow at a glance. To this end, every module is equipped with an integral current measur-ing device. The currently con-
Active design supports remote administration via HTTP and SNMP plus local current meas-urement and display in the rack.
nected load of the module is visually indicated at all times.
Networking capability of the active modules via CMC-TC In conjunction with the Rittal CMC-TC Processing Unit II, up to 16 active PSM/PCU modules may be managed by TCP/IP (SNMP, Telnet) via the integral Web interface. Event-controlled linking e.g. of switching states with other CMC-TC sensors (e.g. temperature) is also supported. Targeted shutdown of the connected servers in the event of an alarm before shutting off the power supply is also possible; see Cat 32, page 796.
If the LEDs are illuminated in green, this indicates that power is being supplied to the PSM mod-ule, and a low current flow of between 0.1 A and 7 A has been detected on the module. Other equipment may now be safely connected.
Yellow indicates an increased current flow of between 7 A and 13 A on the module. The power consumption of all equipment connected to the module may total up to 3000 W. Before con-necting other equipment, please note its connected load.
Rittal Innovations 2008/IT Solutions
In this case, the phase current of 13 A is exceeded. No further equipment should be con-nected in order to avoid over-loading and tripping of the prefuses. Even if the maximum phase current of 16 A has not yet been reached, for switcha-ble modules it is important to note that higher current peaks may occur (e.g. if all connected equipment is switched on simul-taneously).
Note:In order to ensure problem-free operation and the maximum connected load (22 kW) of the PSM bar, it is essential to ensure that a separate circuit with 16 A fuse is allocated to each mod-ule installed in the PSM bar (this is possible with 2 x three-phase 16 A infeed to the PSM bar by refraining from populating the 7th slot).
For active PSM/PCU modules that are controlled via the CMC-TC system, the default values of the output ranges may be modified.
Power
Po
wer
Power System Module PSM
Plug-in modules PSM Modules for the 3 most common connector types. Each module occupies one slot; in this way, up to 7 (4) modules may be installed in a PSM busbar for 2000 (1200) mm high racks. Combined popu-lation of different modules is also supported.
Material:Aluminium section with black plastic cover.
PSM module, standard Number of slots
Model No. DKPlug-in module
IEC 60 320 C13 6 7859.120
IEC 60 320 C19 4 7859.130
Active PSM IP-compatible in conjunction with CMC-TC Module with 4 + 21) slots which may be individu-ally switched via the Rittal CMC-TC enclosure monitoring system. These active, switchable mod-ules each occupy 2 slots in the PSM bar. In this way, up to 3 (2) modules may be installed in a PSM busbar for 2000 (1200) mm high racks. Combined population of different modules is also supported. A maximum of 16 modules may be administered via one IP address.
Material:Aluminium section with black plastic cover.
Supply includes:Bus cable.
Note:Operating the module without CMC-TC (local power display in the rack): For operation of the socket strip, power pack DK 7201.210 and a mains cable (country-specific) are required. Up to 4 modules may be operated with one power pack.
PSM module, switched Number of slots
Model No. DKPlug-in module
IEC 60 320 C13 8 7859.122
IEC 60 320 C19 4 + 21) 7859.1321) There are 2 x IEC 60 320 C13 slots
(IEC 320 connection) available per module.
Power Control Unit PCUIP-compatible in conjunction with CMC-TC Module with 4 + 21) slots which may be individu-ally switched via the Rittal CMC-TC enclosure monitoring system. The PCU can be mounted in or on the 19˝ mount-ing level. A PSM busbar is not required.
Material:Aluminium section with black plastic cover.
Supply includes:Bus cable, assembly parts for 482.6 mm (19˝) installation, connector.
Note:Operating the PCU without CMC-TC (local power display in the rack): For operation of the socket strip, power pack DK 7201.210 and a mains cable (country-specific) are required. Up to 4 modules may be operated with one power pack.
Rittal PCU, switched Number of slots
Model No. DK
IEC 60 320 C13 8 7859.125
IEC 60 320 C19 4 + 21) 7859.1351) There are 2 x IEC 60 320 C13 slots
(IEC 320 connection) available per module.
59Rittal Innovations 2008/IT Solutions
Sec
uri
ty
SecurityWireless sensor network CMC
-TCEver more complex IT infrastructures demand innovative
security systems. Rittal offers a wireless sensor network for
wireless security. The sensors are encrypted and operate in
the 2.4 GHz ISM band with innovative chirp technology.
Thanks to the CMC-TC system concept, all security-relevant
information may be incorporated into network management
systems or is available on the Rittal website.
The wireless I/O unit forms the basis of the Rittal wireless sensor network.
The sensors may be protected from humidity using the IP protective cover.
The modular CMC-TC system allows security solutions to be compiled individually, includ-ing the use of wireless sensors.
60 Rittal Innovations 2008/IT Solutions
Flexible The use of radio sensors is appropriate whenever direct cabling between the sensor and I/O unit is too time-consuming or too diffi-cult to implement, e.g. for outdoor cabling, or in inaccessible places in the server rack or within the IT infrastructure of data centres (indoors). This eliminates the need for cabling of the sensors, and the system is easily retrofitted while operational. There is no need to lay any cable trunking or to modify the IT infrastructure. The position of the measuring point may also be altered retrospectively by simply mov-ing the sensor. By connecting the wireless I/O unit to the existing CMC-TC monitor-ing system, the system may be extended in a modular and flexible manner. In order to optimise radio links, an external aerial may optionally be used on the wireless I/O unit. Similarly, the transmis-sion and reception range may be flexibly extended using additional wireless I/O units as repeaters. There is no need for visual connection between the transmitter and receiver of the wireless network, which likewise serves to increase flexibility.
Plug and play compatibility system The wireless sensor network is easily set up using plug & play installation. By means of a simple commissioning procedure comprised of a learning mode and learning key, the sensors are taught by the wire-less I/O unit via plug & play. Rittal offers a wireless measurement system with digital display for identifying the optimum radio connec-tion for the assembly site. This measurement system has the same design as the sensors and may be connected to the reference loca-tion of the sensor for test purposes.
Robust The wireless sensor network may be used in racks, bayed enclo-sure suites, IT rooms, buildings, production plants, storage halls, industrial plant or outdoors. It is also suitable for use in inter-disci-plinary applications. The wireless I/O unit and the CMC-TC monitoring system must be installed in a Rittal enclosure with an appropriate protection cate-gory to suit the application. A protective cover is available for the sensors as an optional accessory to increase the IP protection cate-gory.
Long service life The wireless sensors contain a high-capacitive, long-life lithium primary cell. Thanks to the modern chirp radio transmission system, an exceptionally low level of energy consumption is achieved; while in sleep mode, the current rating is in the micro-ampere range, thereby facilitating a long battery life. Depending on the sensor type, application and ambient temperature, a battery life of up to 5 years is achievable. The battery cell is continually monitored by the sys-tem. It is also possible to replace the battery.
Secure Radio transmission occurs within the 2.4 – 2.48 GHz ISM band, which is licence-free for end users. Using so-called chirp impulses (broadband transmission) for radio transmission produces a high level of protection from interference with other radio systems on the same frequency range, such as WLAN, ZigBee, Bluetooth. Additionally, the integral encryption of radio telegrams offers reliable protection from unauthorised monitor-ing of the data transmission. As well as transmitting the measure-ments, the connection quality is constantly monitored by means of so-called “live-check” telegrams from the sensor.
Rittal Innovations 2008/IT Solutions
Wireless sensor network CMC-TC, modules
Security
2 1
LANWireless I/O unit DK 7320.240 (as basic unit)
3
Interfaces for up to 3 further Rittal wireless networks.
Cat 5 patch cable
Cat 5 p
Programming cable DK 7200.221
atch cable DK 7320.470
4
Connection cable DK 7200.210
Processing Unit II DK 7320.100
Power pack 100 – 240 V AC DK 7320.425
e
Sec
uri
ty5
6
Wireless I/O unit DK 7320.240 (as repeater)Connection cable DK 7200.210
Power pack 100 – 240 V AC DK 7320.425
The wireless network will behavdifferently depending on the environment (walls, distances, sources of interference, dynam-ics). By using additional wireless I/O units as repeaters, the radio connection can be improved/radio links extended.
7
Alternative external aerial DK 7320.241
Wireless measurement system (must be available for com-missioning DK 7320.242)
Wireless humidity sensor DK 7320.515
Wireless access sensor DK 7320.535
Wireless temperature sensor DK 7320.505
IP protective cover (optional)DK 7320.245
Wireless digital inputDK 7320.585
1
2
3
4
5
6
7
61
Sec
uri
ty
SecurityWireless sensor networ
62
2
k CMC-TC
The CMC-TC system offers optimum solutions for many
security applications. These opportunities are widened with
the Rittal wireless sensor network.
Benefits:● Cabling to the sensor is
eliminated ● Large range of applications
thanks to high IP protection category and high tempera-ture range
● Secure, encrypted radio transmission
● ISM band (2.4 GHz) suitable for universal use
● Networking capabilities (TCP-IP, SNMP, Web etc.) with the CMC-TC monitoring system
● Flexible, modular design ● Low-maintenance with long
battery operating period ● Simple installation based on
the plug & play system ● Monitoring of the radio con-
nection to the sensor ● Monitoring of the battery status
Wireless I/O unit/repeater Humidity sensor
Temperature sensor Access sensor
LAN
1
3
Modular The wireless sensor network is comprised of a central main com-ponent, the wireless I/O unit, and the wireless sensors. One wireless I/O unit is capable of managing up to 16 wireless sensors via radio. Users can choose between 4 sensors with different monitoring functions, in any given combination. The wireless sensor network is compatible with the CMC-TC moni-toring system, which is based on Processing Unit II (PU II). Several sensor units (I/O unit, access unit, climate unit, FCS, socket strips, etc.) are available for the PU II. Up to 4 sensor units may be connected to one PU II.
The wireless I/O unit is connected to the PU II via a Cat 5 cable and can also be mixed with the existing sensor units. Up to a maximum of 4 wireless I/O units may be connected to one PU II. In total, there-fore, up to 64 wireless sensors (4 x 16) may be operated with one PU II. The CMC-TC system with the PU II is always required in order to operate the wireless sensor network. In this way, the monitoring information may be processed and displayed in the Ethernet via SNMP, Web, FTP etc. It is also possible to connect cabled sensors to wireless sensors and compile modular, application-specific moni-toring functions.
Processing Unit II (PU II)
Sensor Unit
Wireless I/O Unit
1
2
3
Rittal Innovations 2008/IT Solutions
Security
Sec
uri
ty
Wireless sensor network CMC-TC
63Rittal Innovations 2008/IT Solutions
Wireless I/O unit/repeater The wireless I/O unit forms the basis of the Rittal wireless sensor network. For operating purposes, the unit must be cabled to Processing Unit II (PU II) DK 7320.100, either using the connection cables for sensor units or a Cat 5 cable (max. 50 m). Data exchange and power supply to the wireless I/O unit occurs via this connection. Up to 4 wireless I/O units may be connected to one PU II. The wireless I/O unit has an aerial attached to the enclosure which may be directed according to the installation position. This aerial may optionally be replaced with an external version. The external aerial is available separately as an accessory. The system is attached via the 1 U mounting unit or the individual mounting unit. A wireless I/O unit is capable of managing up to 16 wireless sensors. There is a choice of 4 differ-ent sensor types. These are also available as accessories. The sensors may be used in any given combination. Sensors are commissioned in teach mode on the base station, and using the teach key on the sensor. The wireless measurement system should be used to determine adequate radio connection quality.
Option for a wider reception range: If the radio range of the wireless I/O unit con-nected to the PU II is not adequate, additional wireless I/O units may be used as repeaters (up to a maximum of 5 repeaters). These I/O units used as repeaters do not require any further cable connection to the PU II, but merely need to be supplied with power via a separate power pack with country-specific connection cables. The repeaters must be installed in the base station, where they occupy one of the 16 sensor slots. There is no need to teach the sensors into the repeaters.
Technical specifications:Range in rooms with visual connection: up to 50 m1) Range in open spaces with visual connection: up to 200 m1) Rated voltage: 24 V DC 1 port RJ 45 for the PU II 16 wireless access points for Rittal wireless sen-sors, or alternatively up to 5 repeaters and up to 11 sensors. Protection category: IP 40 to EN 60 529 Temperature range: +5°C to +45°C1) If the ranges are not adequate, they may be extended with the wireless I/O unit as repeater or with the external aerial. The range information depends on the conditions of use and may vary according to the application.
Note:A wireless measurement system, Model No. DK 7320.242, is always needed for commis-sioning the Rittal wireless sensor network.
Power
2
24 V DCmax. 2 A
31 4
Model No. DK
Wireless I/O unit/repeater 7320.240
Accessories: Designation Model No. DK
CMC-TC Processing Unit II – the basic system for the CMC-TC application 7320.100
CMC-TC 1 U mounting unit for the attachment of WL I/O unit 7320.440
CMC-TC individual mounting unit for the attachment of WL I/O unit 7320.450
CMC-TC connection cable sensor unit 0.5 m for connecting to the PU II 7320.470
CMC-TC connection cable sensor unit 2 m for connecting to the PU II 7320.472
CMC-TC connection cable sensor unit 10 m for connecting to the PU II 7320.481
CMC-TC power pack 24 V, input 100 – 230 V AC, only for the repeater application of the wireless I/O unit
7320.425
CMC connection cable D 230 V AC for the power pack 7200.210
ISM band 2.4 GHz
Standard system aerial External aerial DK 7320.241 may optionally be connected here.
Socket for power supply to the I/O unit as repeater. The power pack output DK 7320.425 is connected to this socket. A country-spe-cific connection cable should be used at the primary end (not necessary if the wireless I/O unit is connected directly to the PU II).
RJ 45 connection to PU II DK 7320.100 via connection cable DK 7320.470/.472/.481. The unit is also supplied with power via this connection. A separate power pack is not required.
Mounting attachments For attachment with individual mounting unit DK 7320.450 or 1 U mounting unit DK 7320.440.
1
2
3
4
External aerialThe external aerial may be used in exchange for the standard aerial of the wireless I/O unit. If a wireless I/O unit is used in a shielded area, improved radio connection to the wireless sen-sors can be achieved by adjusting the mounting position of the external aerial. The connection cable supports flexible positioning. The base of the external aerial is equipped with a magnet to facilitate mounting on metal.
Technical specifications: Length of aerial: 240 mmConnection cable: 1.5 mProtection category: IP 40 to EN 60 529 Temperature range: –20°C to +65°C
Model No. DK
External aerial 7320.2411) 1) On request: Outdoor aerial.
SecurityS
ecu
rity
Wireless sensor network CMC-TC
64 Rittal Innovations 2008/IT Solutions
Wireless temperature sensorThe wireless temperature sensor is required for monitoring temperatures. It may be operated with the wireless I/O unit. Every 60 seconds, a meas-urement is sent to the central wireless base sys-tem. The temperature sensor is accommodated behind a protective membrane and contains a long-life 3.6 V lithium primary cell which may be replaced if necessary. It is mounted using the mounting bracket enclosed with the supply which may be secured e.g. to the enclosure frame. The sensor is simply mounted on the bracket. If a higher IP protection category is required, the sensor may be retrofitted with the IP protective cover. The battery and the radio connection quality of the sensor are monitored.
Technical specifications:Rated voltage: 3.6 V DC Protection category: IP 40 to EN 60 529 Protection category with IP protective cover: IP 54 to EN 60 529Temperature range: –25°C to +65°CMeasurement tolerance: ±2 KBattery service life: up to 5 years at –5°C to +25°C1) 1) Depending on the temperature range.
Model No. DK
Wireless temperature sensor 7320.505
Wireless humidity sensorThe wireless humidity sensor is used for monitor-ing relative humidity levels. It may be operated with the wireless I/O unit. Every 120 seconds, a measurement is sent to the central wireless base system. The humidity sensor is accommodated behind a protective membrane and contains a long-life 3.6 V lithium primary cell which may be replaced if necessary. It is mounted using the mounting bracket enclosed with the supply which may be secured e.g. to the enclosure frame. The sensor is simply mounted on the bracket. If a higher IP protection category is required, the sensor may be retrofitted with the IP protective cover. The battery and the radio connection quality of the sensor are monitored.
Technical specifications:Rated voltage: 3.6 V DC Protection category: IP 40 to EN 60 529 Protection category with IP protective cover: IP 54 to EN 60 529Temperature range: –25°C to +65°CMeasurement range: 10 – 90 % relative humidity.Measurement tolerance: ±3 % rel. hum. (at 20°C)Battery service life: up to 5 years at –5°C to +25°C1) 1) Depending on the temperature range.
Model No. DK
Wireless humidity sensor 7320.515
Wireless access sensorThe wireless access sensor is used for monitor-ing doors. It may be operated with the wireless I/O unit. In the event of a status change, a mes-sage is sent to the central wireless I/O unit. The access sensor is equipped with a Hall sensor which monitors the position of the magnet on the door. The sensor contains a long-life 3.6 V lithium primary cell; the battery may be replaced if nec-essary. It is mounted using a mounting bracket and a universal mounting bracket for various Rittal racks. The sensor is simply mounted on the bracket. If a higher IP protection category is required, the sensor is easily retrofitted with the IP protective cover. The battery and the radio connection quality of the sensor are monitored.
Technical specifications:Rated voltage: 3.6 V DC Protection category: IP 40 to EN 60 529 Protection category with IP protective cover: IP 54 to EN 60 529Temperature range: –25°C to +65°C Battery service life: up to 5 years at –5°C to +25°C1) 1) Depending on the temperature range and door opening frequency.
Model No. DK
Wireless access sensor 7320.535
Security
Sec
uri
ty
Wireless sensor network CMC-TC
65Rittal Innovations 2008/IT Solutions
Wireless digital inputThe wireless digital input is used for monitoring messages from external systems. It may be oper-ated with the wireless I/O unit. In the event of status changes, a message is sent to the central wireless base system. The digital input is capa-ble of handling message signals of between 10 – 30 V DC. The signal must be made available via the exter-nal system. If the system to be monitored only has a floating contact, the 24 V DC Rittal CMC-TC power pack may be used. The function Normally Open (NO) (normally open alarm contact) or Normally Closed (NC) (normally closed alarm contact) may be set directly on the sensor at the push of a button. The sensor con-tains a long-life 3.6 V lithium primary cell. The bat-tery may be replaced if necessary. It is mounted using the mounting bracket enclosed with the supply which may be secured e.g. to the enclo-sure frame. The sensor is simply mounted on the bracket. The battery and the radio connection quality of the sensor are monitored.
Technical specifications:Rated voltage: 3.6 V DC External indicator signal: 10 – 30 V DC (must always be provided externally)Protection category: IP 40 to EN 60 529 Temperature range: +5°C to +45°CBattery service life: up to 5 years at +5°C to +25°C1) 1) Depending on the temperature range and alarm frequency.
Optional accessories for wireless digital input: CMC-TC power pack 24 V, input 100 – 230 V AC, for external signal Model No. DK 7320.425 CMC connection cable D 230 V AC for power pack Model No. DK 7200.210
Model No. DK
Wireless digital input 7320.585
Wireless measurement systemThe wireless measurement system has a digital display with a display range from 0 to 9. The reading on the display indicates the quality of the radio connection. The wireless measurement system has the same design as the wireless sen-sors. This means that the measurement system may be installed instead of the sensors and the radio connection quality assessed.A measurement system must be available for commissioning the wireless sensor network. After commissioning, the measurement system may be used for further installations, e.g. during system expansions or modifications. The wireless measurement system has a long-life 3.6 V lithium prima-ry cell. The battery may be replaced if nec-essary.
Technical specifications:Rated voltage: 3.6 V DC Protection category: IP 40 to EN 60 529 Temperature range: +5°C to +45°C
Note:A wireless measurement system, Model No. DK 7320.242, is always needed for commis-sioning the Rittal wireless sensor network.
Model No. DK
Wireless measurement system 7320.242
IP protective coverfor wireless temperature/humidity/access sensor
The IP protective cover allows the IP protection category of the following sensors:● Wireless temperature sensor DK 7320.505● Wireless humidity sensor DK 7320.515● Wireless access sensor DK 7320.535to be increased. The corresponding IP protection categories are listed for the sensors. The cover is made from flexible plastic and simply slides over the enclosure of the sensor. This gives the wireless sensors protection from humidity plus increased protection from dust.
Model No. DK
IP protective cover 7320.245
Security
Monitoring system CMC-TC
66 Rittal Innovations 2008/IT Solutions
Sec
uri
ty
The CMC-TC monitoring system is the complete security manage-ment concept for preventive protection, to guard against follow-on costs. At the same time, it is also the central organisational unit for connecting to the facility management system. Processing Unit II (PU II) forms the basis of any CMC-TC application, and provides a direct interface to the user network. The sensor units are linked to the PU II with various sensors. The function of the CMC-TC monitoring system is determined by the selection of sensor units and sensors.
PLC X2
RTT I/O unit
G+
-
RS-485
LANCOM
RS-232
0°0° 0°0°0°0°
3 41
5 6
2
10987
Processing Unit II (PU II), the nerve centre of the CMC-TC monitoring system
Server shutdown function
Electronic packaging systems
Active Power System mod-ule PSM, Power Control Unit PCU, PSM bar with measure-ment
RTT I/O unit for climate control equipment
Liquid Cooling Package LCP
I/O unit wireless
Access unit
Climate unit, Fan Control System FCS
Universal I/O unit
1
2
3
4
5
6
7
8
9
10
Monitoring system CMC-TC Processing Unit II The Processing Unit II (PU II) is the central con-trol of the CMC-TC system. This unit is required for every monitoring application in the CMC-TC system. The PU II contains a powerful computer with modern network technology. On the basis of the PU II hardware (hardware version 3.01), new software functions may be utilised via the update routine.
Ethernet to IEEE 802.3 via 10/100BaseT full duplex is available as the network interface. The basic protocols are TCP/IP, SNMPv1, SNMPv3, Telnet, FTP, HTTP, HTTPS, NTP, SSH, DHCP, SFTP, SMTP, PPP. Rittal sensors, door systems, fans, climate control units, extinguisher systems, LCP air/water heat exchangers and socket strips may be connected as applications.
Model No. DK
Processing Unit II 7320.100
New user-friendly web design Processing Unit II supports a growing number of Rittal components. This makes it more important than ever to have a product-specific, visualised Web interface. The software update provides individual graphical interfaces for the individual accessory products.
This makes handling much easier, and contrib-utes to simple, intuitive working with the CMC-TC system.
Shutdown function for server For UPS systems, Rittal offers a shutdown func-tion for servers via the RCCMD shutdown licen-ces. The shutdown software is installed on the server and enabled with the RCCMD shut-down licence. The Rittal UPS systems are able to activate shutdown of the servers via the SNMP card. Shutdown of the servers can also be acti-vated with the software update of PU II. Via the Web operator interface, the alarm functions of the
CMC-TC may be selected and directed at several servers. In this way, for example, a server shutdown may be activated if the temperature in the server environment is too high. The shutdown function may be used independently of the Rittal UPS systems, or together with the Rittal UPS systems. In both cases, RCCMD shutdown licences, Model No. DK 7857.421, are required for each server. The server software may be downloaded at www.rimatrix5.com.
New software functions (download the update software at www.rimatrix5.com)
Multi-lingual Web interfaceThe software update offers the option of selecting other languages in addition to the standard lan-guage, English. Foreign languages only apply to the menu of the Web interfaces. As a general principle, system texts are executed in English,
because SNMP is linked to ASCII. The foreign language file may be loaded onto the PU II via FTP or SFTP.
Security
Sec
uri
ty
Basic CMC monitoring system
67Rittal Innovations 2008/IT Solutions
Basic CMC The Basic CMC is the entry-level module for small monitoring applications; a maximum of 4 sensors may be connected to the system. Three voltages may optionally be monitored via module DK 7200.520. The system has a network interface and a user-friendly Web operator interface.
Benefits: ● There are 17 plug & play sensors available to
choose from ● TCP/IP, SNMP network connection ● Integral Web server for configuration ● Automatic menu setting ● Simple installation based on the plug & play
system ● Monitoring of sensor connection ● Alarm recording in case of network failure ● Built-in real-time clock with NTP ● May be used via power pack for
100 – 240 V AC or 48 V DC
Interface to the customer: The Basic CMC can be incorporated directly into the user network via 10/100BaseT. The Basic CMC can also be linked to the master DK 7320.005 via this interface (TCP/IP, SNMP).
Interface to the sensors/actuators: The Basic CMC provides 4 open ports for sen-sors. There is a choice of 17 sensors with differ-ent functions. In this way, the monitoring functions may be freely combined.
Fast, easy programming and installation: The sensors/actuators are set up via an auto-matic electronic ID system. Installation is via a flexible plug & play system. This eliminates the need for time-consuming programming and wiring.
Power supply:Power is supplied centrally via a power pack in the Basic CMC. This supplies the connected sensors. There is a choice of two input voltages (AC power pack DK 7320.425 and DC power pack DK 7320.435).
Note:No sensor units, socket strips, access systems, PSM, climate control systems etc. may be con-nected to the Basic CMC. PU II, Model No. DK 7320.100, is needed in the CMC-TC system in such cases.
Also required:
Power pack DK 7320.425, Connection cable DK 7200.210, Programming cable DK 7200.221. Optional: 1 U mounting unit DK 7320.440, single cover DK 7320.441.
CCMC-TC
Basic CMC
IOIOI
1 2 3 654
1 123 4
Power
P-I2CIOIOI
24 V DCmax. 2 A
7 8 9 10 11Model No. DK 7320.111
W x H x D mm 136 x 44 (1 U) x 129
Network interfaceEthernet to IEEE 802.3 via 10BaseT/100BaseT, 10/100 Mbit/s
Protocols
TCP/IP, SNMPv1, Telnet, Secure Shell SSH, FTP, HTTP, HTTPS mit SSL, Network Time Protocol NTP, DHCP, PPP, SMTP, SFTP, SNMPv3
Rated voltage 24 V DC
Serial interfaces RS232
Ports for sensors Max. 4 sensors
Bus system Power I2C for extension unit voltage AC DK 7200.520
Alarm relay output Change-over contact max. 24 V DC 200 mA
Audio display Piezo signal generator
Time function Real-time clock with NTP
Temperature application range +5°C to +45°C
Humidity application range
5 % to 95 % relative humidity, non-condensing
IP protection category IP 40 to EN 60 529
Control key The C key is for sensor/actua-tor identification, set-up of the system and acknowledge-ment.
Alarm LED The LED signals alarms or configuration changes.
Link/Traffic LED The LED signals the status of the network interface 10BaseT/100BaseT.
RS 232 interface RJ 10 For programming via the serial PC interface.
Acoustic alarmThere is an acoustic alarm signalling device integrated into the Basic CMC.
Mounting attachment For attachment with individual bracket DK 7320.450 or 1 U mounting units DK 7320.440.
1
2
3
4
5
6
Inputs for a maximum of 4 sensors Up to 4 sensors may be connected via the 4 inputs. There is a choice of 17 different sensor/actuator types.
Power-I2C bus RJ 45 Up to 2 voltage extension units DK 7200.520 may be connected via the power I2C bus. Up to three AC voltages may be monitored with every extension unit. Connection cable DK 7320.470.
Alarm relay RJ 12/RS 232 The upper RJ 12 jack provides a change-over contact from the Basic CMC alarm relay. Connection cable DK 7200.430. The lower RJ 12 jack provides a serial inter-face (display unit/GSM module/ISDN unit).
Ethernet 10BaseT RJ 45Integral Ethernet interface to IEEE 802.3 via 10/100BaseT full-duplex 10/100 Mbit/s.
Power supply The rated voltage of the Basic CMC is 24 V DC. There is a choice of power packs with varying primary voltages. AC power pack DK 7320.425.
Sensors/actuators Max. Model No. DK
Temperature sensor 4 7320.500
Humidity sensor 4 7320.510
Analog sensor input module “4 – 20 mA” 4 7320.520
Access sensor1) 4 x 5 7320.530
Vandalism sensor 4 7320.540
Acoustic sensor 4 7320.640
Airflow monitor 4 7320.550
Smoke alarm 4 7320.560
Motion sensor 4 7320.570
Digital input module 4 7320.580
Digital relay output module 4 7320.590
Voltage monitor 4 7320.600
Voltage monitor with 10 A switch output 2 – 4 7320.610
Voltage monitor with 16 A switch output 2 – 4 7320.611
48 V voltage monitor 4 7320.620
Leak sensor 4 7320.630
Leak sensor, 15 m 4 7320.6311) Up to a maximum of 5 sensors may be connected
in series.
7
8
9
10
11
SecurityS
ecu
rity
Master II GSM unit
Monitoring system CMC-TC Master II with interface for GSM unit The CMC-TC Master II is an optional component in the CMC-TC system. The master allows the alarm data of up to 10 PU II systems to be linked and displayed.
The next generation of the Master II system has a connection cable/interface to connect the GSM unit. This makes it possible to send alarm traps via the GSM unit. Similarly, SMS messages may be sent for certain conditions/links.
Further information on the Master II system may be found in Rittal Catalogue 32 or in the IT Catalogue. Availability on request or at www.rimatrix5.com.
Also required:
GSM unit, Model No. DK 7320.820, Power pack, Model No. DK 7320.425. Connection cable, Model No. DK 7200.210.
Master II
Model No. DK 7320.005
Network interface
Ethernet to IEEE 802.3 via 10BaseT/100BaseT, 10/100 Mbit/s
Protocols TCP/IP, SNMP V1, TELNET, SSH, TFTP, HTTPS
Rated voltage 100 – 240 V AC, 50/60 Hz
Serial interfaces 2 D-SUB 9 jacks RS232
USB Standard 2.0 for Rittal USB webcams
Time function Real-time clock
Temperature application range +5°C to +35°C
Humidity application range
5 % to 80 % relative humidity, non-condensing
CMC-TC accessories
68 Rittal Innovations 2008/IT Solutions
Basic mounting unit CMC-TC 1 U, pull-out The CMC-TC system offers a wide range of mod-ules for individual monitoring functions. This sys-tem is based on a PU II, power pack, sensor units and sensors. The basic mounting unit 1 U pro-vides compact accommodation for these basic modules.
The 1 U basic mounting unit has an integral cable duct to accommodate surplus cable. 3 sensor units/PU II may be accommodated at the front, and up to 8 sensors and 2 power packs with cable clamping at the rear. The entire unit may be pulled forwards out of the 482.6 mm (19˝) level. This ensures optimum access to the systems from the front, allowing easy retrospective installation or modification of the system.
Note:The 1 U basic mounting unit is required if there is no or difficult access to the rack from behind.
Material:Sheet steel, spray-finished
Colour:RAL 7035
Model No. DK
Basic mounting unit CMC-TC 7320.442
Outdoor handle CMC-TCfor CS Toptec The outdoor handle may be connected to the access unit of the CMC-TC system. The electric lock system of the handle locks the function of the swing lever. If there is no voltage applied to the handle, the swing lever is released. When 24 V DC is applied to the handle, the swing lever will lock. In addition, actuation of the lock insert is monitored. Semi-cylinders of the type ASSA may be used. The semi-cylinder is covered with a protective device. The handle contains an ID so that it is automatically detected and set up by the CMC-TC system. Power supply to and data exchange with the access unit occurs via the attached connection cable. An access sensor (DK 7320.530) is always required for door moni-toring. With the door closed and the clip-down handle locked home, latching is activated by switching on the lock magnet. By deactivating the lock magnet and simultaneously opening with the semi-cylinder, the CMC-TC allows the handle to be folded down.
The handle must be integrated into the corre-sponding CS Toptec enclosure by Rittal. This service may be requested on an individual basis.
Technical specifications: Rated voltage: 24 V DC Rated current: 100 mAConnection cable: 2.5 m Connector type: RJ 12, 6-pole
Protection category:IP 55 in the CS Toptec enclosure
Outdoor handle CMC-TC Model No. DK
L/h door hinge 7320.7251)
R/h door hinge 7320.7261) 1) Extended delivery times.
To fit sensor unit
I/O Unit Access Unit Climate Unit
�
Monitoring
IP-Cam
TCP/IP
TCP/IPVideo clients
CMC-TC
le
Processing Unit II
n cable
Programming cab
Connectiofor sensor units
Power pack
Connection cable for power pack
Up to 4 sensor units
Video server
Mo
nit
ori
ng
Event messaging
CMC-TC alarm processing
Start recording
Client visualisation
Motion detection
1
2
3
4
5
Rittal network video monitoring for your data centre and building managementThe Rittal IP monitoring solution supports exten-sive visual and alarm-controlled monitoring. Com-pared with standard analogue video monitoring solutions, digital video systems offer a wider range of functions and additional benefits. Rittal IP cams may be integrated into any existing network. Separate structured cabling, as required in analog systems, is not necessary. This con-siderably reduces the costs associated with the required infrastructure, because modern Power over Ethernet technology (PoE to IEEE 802.3af) means that a separate power supply to the camera installation site is not required.
The Rittal video monitoring system is modular and is able to grow dynamically along with your requirements or data centre. One IP-Cam is suffi-cient for a basic system. This is easily configured and operated via the integral Web interface. No further hardware is required. If the data is to be permanently backed up onto external data carriers, the Rittal software RiWatchIT V3, which is exclusively available for Rittal IP-Cams, should be used. This converts a powerful PC with MS Windows or Linux operating system into a video server with video archive, which stores alarm-con-trolled images onto the hard disk or an external network drive. A combination of video monitoring with the CMC-TC enclosure monitoring system ensures even more extensive monitoring. This ensures that no actions are concealed. All standard CMC-TC sensors such as access, smoke or temperature sensors are supported. In this way, the Rittal video monitoring solution affords perfect all-round pro-tection for a secure data centre.
Video monitoring in combination with the CMC-TC monitoring systemThe Rittal monitoring system CMC-TC comprises a broad range of modules and functions. It is pos-sible, for example, to monitor access to the data centre or the equipment racks, with personalised access monitoring achieved by way of smart cards, magnetic cards or transponders. This access security can be further significantly enhanced by incorporating video monitoring, as all activities or alarms in the data centre can be recorded auto-matically. Furthermore, the video monitoring func-tion can be linked with all CMC-TC accessory sensors (including the assignment of different camera systems). If an alarm then occurs, e.g. impermissible temperatures in the racks or trig-gering of an extinguisher system connected to CMC-TC (such as DET-AC Plus), automatic video recording is started. With this combination of active security technology and video monitoring, Rittal offers unique, all-round protection for your data centre.
Benefits: ● Discovery function: The cameras installed in the
network are automatically detected and set up. ● Overview/room plan with drag & drop position-
ing of the cameras. By double-clicking on the relevant camera symbol, the live image is dis-played in a window.
● Linking of individual cameras to all CMC-TC sensors such as access, temperature, smoke, humidity etc.
● Optical alarm representation with highlighted live image (red frame).
● Multi-view display: Several live images (4/9/16) may be displayed on the screen.
● The software has an integral video player to play the recorded files.
● All video files are time stamped and stored in MJPEG format.
● Extensive security functions: − The video files are stored in encrypted for-
mat. Reproduction is only possible using the video player integrated into the software.
− “Four-eyes” principle: Upon request, access to the cameras can be password-protected so that at least 2 people must be present at all times.
● Export functions: These facilitate the unen-crypted storage of video sequences or individ-ual images in MJPEG/JPG format e.g. on CD-ROM.
● Auto-config in administrator mode: Global camera settings are automatically configured.
● Simultaneous access to the video server with several clients is supported.
Video technology
69Rittal Innovations 2008/IT Solutions
MonitoringM
on
ito
rin
g
Video technology
70 Rittal Innovations 2008/IT Solutions
Rittal IP-Cam type 1Rittal IP-Cams are ideal for use in the data centre and for indoor room monitoring. These compact cameras may be fitted quickly and easily wher-ever there is an IP network connection close at hand.
The magnetic base facilitates toolless installation e.g. on an enclosure roof. The 220 m long swan neck is easily adjusted. A wall attachment is sup-plied in addition to the magnetic base.
Rittal IP-Cam Type 1
Model No. DK 7555.1001)
Functions
Video sensor (MegaPixel) 0.3
Focus manual
Video
Live camera display �
Adjustable HTML pages (ActiveX required) �
Security functions
Alarm recording via motion detection or external authorisation �
E-mail forwarding �
Technical specifications
Video sensor CMOS
Light sensitivity 1 lux
Maximum resolution (progressive scan) 640 x 480 pixels
Video streams Motion JPEG, bandwidth controllable (various levels of compression) �
Image settings
Compression �
Colour, contrast, brightness �
White balance �
Overlays (time, date, text) �
Password protection (restricted access) �
Connections
Network (10BaseT/100BaseTX) RJ 45
Power supply Hollow connector
Long-range power pack (connector acc. to version) 100 – 240 V AC (50/60 Hz)
Supply includes Camera, power pack, base, assembly parts
Software
RiWatchIT V3 For detailed information, refer to page 71.
We reserve the right to make technical modifications. 1) Extended delivery times.
Power splitter for Rittal IP-Cam type 1Power may be supplied to the Rittal IP-Cam type 1 via the network cable (Power over Ether-net, PoE) using this adaptor. This eliminates the need for a separate power pack or electricity con-nection at the installation site. Power can be sup-plied to the camera (5 V DC approx. 3 W) via existing PoE-compatible network switches. The required operating voltage may optionally be supplied to the Cat 5 network cable via an exter-nal infeed (midspan).
Model No. DK
Power splitter 7555.310
Extended delivery times.
Power infeed for Power over Ethernet (PoE) network com-ponents (external infeed) If the network environment used is not designed for PoE components, power supply to a PoE-com-patible network camera via the existing network cable can be achieved with this single-port mid-span. This means that the external power pack sup-plied is not required.
Technical specifications:PoE to IEEE 802.3af Output: 15.4 W/port
Delivery times and multi-channel midspans available on request.
Monitoring
RiWatchIT V3 with video functionThe software RiWatchIT V3 is a management soft-ware package for the RimatriX5 data centre. The individual Rittal components in the data centre have a network interface and may be polled via the SNMP protocol. What is more, images from the Rittal network camera DK 7555.100 may be incorporated into the RiWatchIT V3 software and linked to CMC-TC alarms.
This means that the entire data centre can be visualised, monitored and documented. The soft-ware may be operated on a server as a service, and information may be retrieved and configured via the Web using the View function. The user may be configured in a user-specific manner with indi-vidual images/graphics and linked to alarms and messages. The images/graphics can also be linked to one another. In this way, the software provides an individual remote management solu-tion for the RimatriX5 system.
System requirements:(minimum):
● Java Runtime Environment JRE 1.5
● Available to download at: java.sun.com
This freeware software is available for downloading at www.rimatrix5.com.
New functions
● Rights administration● Integration of variables into the interface● Support of video camera● Support of LCP+● Support of LCP Extend● Support of single-phase UPS● Support of wireless sensor network● Support of leak sensor 15 m● Support of acoustic sensor● Support of active PSM 6-way, 4 x with earthing-pin
● Support of active PSM 6-way, 4 x with C19● Support of PSM rail with measurement● Support of rack extinguisher system/early fire
detection DET-AC Plus
Mo
nit
ori
ng
View moduleThe View module may be launched from up to ten computers in parallel. Monitoring of the data centre may be implemented from here. The View module receives the information via the server/SNMP module.
Admin moduleThe Admin module allows individual structuring of the alarm system. The various alarms may be linked to the different locations.
Server module/SNMP moduleThe server module and SNMP module may be installed on any given computer as a service. All key data relating to the security of the data centres is collated and documented. The applications run permanently in the back-ground and are visible to the user.
Video functions/benefits:● Cost-effective, because it uses the existing
network infrastructure● Future-proof IP technology● Flexible use for data centre and indoor build-
ing monitoring● Global access is supported via IP networks● Scalability – the system grows along with your
requirements
● Free monitoring software for Rittal IP-Cams ● Supports a link with the CMC-TC sensors● 16 cameras are supported ● “Four-eyes” principle: Upon request, access to
the video recordings may be protected with passwords.
Software, service, RiWatchIT V3
71Rittal Innovations 2008/IT Solutions
MonitoringM
on
ito
rin
g
SSC Duo 16 With the SSC Duo 16, Rittal offers an ultra-com-pact KVM switch with both a local access and an IP access. These two users are able to access the con-nected servers in parallel/simultaneously. Up to 16 servers may be connected using Cat cables and SSC Connect adaptors (available in a PS/2 and USB variant). Because signals from the video, keyboard and mouse are transmitted via a shared Cat cable, the amount of cabling is reduced considerably. Processor-controlled key-board and mouse emulation for each channel ensures fault-free booting and reliable switching between the connected computers. The integral IP console supports location-independent access to the servers through to BIOS level.
Access may be made both via the integral Web interface (via Java client) and via client software for Windows and selected Linux distributions, available free of charge. The switch includes rights administration for up to 16 user profiles.
Material:Sheet steel, powder-coated
Colour:RAL 7035
Protection category:IP 40
Also required:
One SSC Connect adaptor DK 7552.421 (PS/2) or DK 7552.422 (USB) is required for each con-nected computer.
SSC Duo 16
Model No. DK 7552.510
Equipment
No. of computers that may be connected 16
Number of users (local, remote, IP), mixed and simultaneous 2
Number of users that may be administered (with allocation of rights) 16
Integral user/rights administration �
OSD menu with mouse operation (English) �
OSD superimposed on computer screen (may be de-activated) �
OSD display of channels used �
Hotkeys for computer selection �
Type of cable to SSC Converter and SSC Console Cat 5, Cat 6
Maximum cable length console – computer (depending on cable quality) 30 m
Port and system support (SSC Connect) PS/2, USB
Automatic video and cable alignment (manually readjustable) �
LED displays
Power �
System Ready (illuminates as soon as the system booting process has been completed without error) �
Status Switch (illuminates when the SSC is operational) �
Network port (activity, connection status) �
Maximum video resolution (depending on cable length) 1920 x 1440@75 Hz
Bandwidth 250 MHz
Connections
Computers/consoles RJ 45
Service for firmware update Jack 2.5 mm
Network RJ 45
Power supply via IEC 320 connection (EN 60 320 C14) �
Power supply (internal power pack) 90 – 264 V/47 – 63 Hz
Power consumption (approx.) 20 W
Dimensions (excluding protruding parts) approx. W x H x D 440 mm x 1 U x 380 mm
Certifications CE
Accessories
SSC Connect PS/2 7552.421
SSC Connect USB 7552.422
Cat 5 cable 2 m 7320.472
Cat 5 cable 5 m 7320.475
Cat 5 cable 10 m 7320.481
Cat 5 cable 15 m 7320.485
Mains connection cable (earthing-pin) 7200.210
KVM switches
72 Rittal Innovations 2008/IT Solutions
Monitoring
Mo
nit
ori
ng
KVM switches
73Rittal Innovations 2008/IT Solutions
SSC view8 USB This compact SSC view8 extends the monitor/key-board units (9055.XXX) to include a KVM switch without the need for an additional U in the rack. Both computers with PS/2 keyboard and mouse connection and modern servers with a USB con-nection for keyboard and mouse may be con-nected to each port.
Supply includes:SSC view8 USB, monitor/keyboard unit connec-tion cable, adaptor PS/2 mouse 8 x
Power is supplied via the power pack integrated into the monitor/keyboard unit. The SSC has a password-protected OSD menu, but server selection may also be made via hotkeys. Suitable combination connection cables (VGA-PS/2 and VGA-USB) are available as accessories in lengths 2 m and 4 m.
Material:Sheet steel, powder-coated
Colour:RAL 9006
Protection category:IP 40
SSC view8 USB
Model No. DK 7552.002
Equipment
Number of computers in stand-alone mode 8
Number of users (with password protection) 1
OSD menu with mouse operation (English) �
OSD superimposed on computer screen (may be de-activated) �
OSD display of channels used �
Hotkeys for computer selection �
Autoscan �
Autoskip (skip over unused channels) �
Type of cable to computer (combination cable) VGA/HD15 and PS/2 VGA/HD15 and USB
Maximum cable length SSC – computer (depending on cable quality) 4 m
Port and system support (SSC Connect) PS/2, USB
Automatic cable alignment (manually readjustable) –
LED display (front) Power
Maximum video resolution (depending on cable length) 1280 x 1024@85 Hz
Bandwidth 200 MHz
Connections
Computer SUB-HD15 / PS/2 or USB
Console SUB-HD15 / PS/2 or USB
Service for firmware update –
Power supply 12 V from monitor/keyboard unit Hollow connector
External power supply 12 V, approx. 0.8 A
Power consumption (approx.) 10 W
Operating temperature +5°C to +45°C
Dimensions (excluding protruding parts) approx. W x H x D 325 x 44 x 95 mm
Dimensions (with rack installation) approx. W x H x D 19˝ x 1 U x 180 mm
Certifications CE
Accessories
CPU cable VGA/PS/2, 2 m (with lockable PS/2 connectors, at both ends) 7552.120
CPU cable VGA/PS/2, 4 m (with lockable PS/2 connectors, at both ends) 7552.140
CPU cable VGA/USB, 2 m, USB-A (computer) to USB-B (switch) 7552.122
CPU cable VGA/USB, 4 m, USB-A (computer) to USB-B (switch) 7552.142
IT infrastructureHigh Performance Package, b
1
ased on Rittal TS 8
3
4
5
IT in
fras
tru
ctu
re
2
Hi1
Plenty of performance in a small space.
For reliable, powerful data centre technology for small and
medium-sized enterprises, supplied in a turnkey package with
a minimum footprint. Room temperature-neutral, energy-
efficient cooling with the Rittal Liquid Cooling Package
(air/water heat exchanger).
Convincing benefits:
● Choose from 6 predefined, pre-configured
performance packages.
● Useful cooling output of up to 16 kW with Rittal LCP.
● Minimum footprint, no special IT room required.
● Twin-walled UPS systems up to 16 kW (N+1).
● Plug & play components – with modular scalability.
● Rittal CMC-TC monitoring system.
● Preassembled in the factory, with tested components.
● Energy-efficient, precise cooling.
● All from a single source.
● Fast delivery and commissioning.
Note:The Rittal High Performance Package needs a recooling system in order to operate. This must be ordered separately in the required output category.
Further information may be found in the Rittal High Performance Package flyer or on the Internet at www.rimatrix5.com
gh Performance Rack
Cooling (Liquid Cooling Package)
PSM socket strip
UPS (uninterruptible power supply)
Rittal CMC-TC enclosure monitoring
2
3
4
5
74 Rittal Innovations 2008/IT Solutions
High Performance Package, based on Rittal TS 8
IT infrastructure
The new Rittal High Performance Package is available in 6 different output categories. Choose from 2 enclosure depths (1000 mm and 1200 mm) and 3 different outputs.
IT in
fras
tru
ctu
re
Type 1 Type 2 Type 3 Type 4 Type 5 Type 6
Model No. DK 7337.510 7337.520 7337.530 7337.540 7337.550 7337.560
Power
Output in kW 6.3 9 16 6.3 9 16
Rack
Dimensions mm
WHD
1100 21001000
110021001000
110021001000
110021001200
110021001200
110021001200
Dimensions of UPS mm
WHD
– ––
–––
600 21001000
–––
–––
600 21001000
Cooling
LCP modules 1 2 3 1 2 3
Recooling system1)
Output kW 8 12 24 8 12 24
Power distribution
UPS modules 2 x 3.15 kW3) 2 x 4.5 kW3) 2 x 16 kW 2 x 3.15 kW3) 2 x 4.5 kW3) 2 x 16 kW
Battery packs 2 2 2 2 2 2
Autonomy Minutes 8 8 7 + 7 8 8 7 + 7
PSM busbar 1(1-phase, 32 A)
1(1-phase, 32 A)
2(2 x 3-phase, 96 A)
1(1-phase, 32 A)
1(1-phase, 32 A)
2(2 x 3-phase, 96 A)
PSM 1 x C13(6 slots)
1 x C13(6 slots)
2 x C13(12 slots)
1 x C13(6 slots)
1 x C13(6 slots)
2 x C13(12 slots)
Socket modules2) 1 x earthing-pin (4 slots)
1 x earthing-pin (4 slots)
2 x earthing-pin (8 slots)
1 x earthing-pin (4 slots)
1 x earthing-pin (4 slots)
2 x earthing-pin (8 slots)
Monitoring
LCP � � � � � �
Access sensor � � � � � �
Layout and commissioning
Integration � � � � � �
Siting � � � � � �
Commissioning � � � � � �
� Included with the supply. 1) This unit is not included in the High Performance Package. It may be ordered separately in the required output category.
Further information may be found at www.rimatrix5.com 2) Other modules available on request.3) A further UPS module for N+1 redundancy is available on request.
75Rittal Innovations 2008/IT Solutions
Rittal complete service included● Delivery by Rittal● Siting, integration and commissioning of the High Performance Package
by the Rittal service team or Rittal service partners.
CS New Basic enclosuresFeatures
New
Bas
ic e
ncl
osu
res
Eyebolts on the inner roof, concealed by the rain canopy, for crane transportation of the fully fitted unit.
Aa2
ll-round ventilation louvres in the remov-ble rain canopy – with a roof projection of 5 mm on all sides.
Wbc
idth 1200 mm: With removable centre ar and two lockable doors with or without entre bar, with overlapping doors.
The open base frame may be covered with gland plates.
Ct
oncrete base/plinth for cable infeed and o ensure enclosure stability.
Ic
ndividual installation with an extensive hoice of system accessories.High-quality protection against corrosion, a high
protection category of up to IP 55 and an extensive
range of system accessories make the single-walled
aluminium CS New Basic enclosure ideal for all
applications with minimal installed heat loss or pas-
sive interior installation.
The flexibility and diversity of configuration options
will satisfy the full range of industry requirements:
Telematics, supply systems, environmental engineer-
ing, telecommunications and the water industry.
CS
Rittal Innovations 2008/Communication Systems
76Rittal Innovations 2008/Communication Systems
single-door, width 600 mm/800 mm
CS New Basic enclosures
B1 T1
T3 B3
T2B2
H2 H
1H
4H
3
H5
Ma
clo
sure
s
terial:Enclosure, roof and doors: 2.0 mm aluminium AlMg3Base/plinth: 3.0 mm aluminium AlMg3
Colour:RAL 7035
Protection category:IP 55 to EN 60 529 in conjunction with the gland plates available as accessories; complies with NEMA 3R.
Supply includes:Single-walled enclosure, closed on all sides, with open base, 2-point locking via swing lever handle and lock cylinder, base/plinth, rain canopy.
Detailed drawing, available on the Internet.
Note:When configuring with partial mounting plates or 482.6 mm (19˝) partial installation, punched rails are required in the enclosure height, see Catalogue 32, page 998.
CS
New
Bas
ic e
n
Width (B1) mm Packs of 600 600 600 800 800 800 Cat. 32, page
Height (H1) mm 800 1200 1200 800 1200 1200
Depth (T1) mm 400 400 500 400 400 500
Clearance width (B2) mm 512 512 512 712 712 712
Clearance height (H2) mm 712 1112 1112 712 1112 1112
Clearance depth (T2) mm 349 349 449 349 349 449
Rain canopy width (B3) mm 650 650 650 850 850 850
Rain canopy height (H3) mm 55 55 55 55 55 55
Rain canopy depth (T3) mm 450 450 550 450 450 550
Base/plinth height (H4) mm 100 100 100 100 100 100
Overall height (H5) mm 955 1355 1355 955 1355 1355
Model No. CS 1 9783.540 9783.550 9783.530 9783.510 9783.520 9783.610
Accessories
Concrete base/plinth 1 9765.182 9765.182 9765.082 9765.088 9765.088 9765.084 900
One-piece gland plate 1 set 9785.517 9785.517 9785.520 9785.518 9785.518 9785.519 IN 08, p. 84
Gland plate, divided 1 set 9785.511 9785.511 9785.514 9785.512 9785.512 9785.513 IN 08, p. 84
Cable entry plate 2 8800.060 8800.060 8800.060 8800.080 8800.080 8800.080 1045
Mounting plate 1 9765.090 9765.092 9765.092 9765.097 9765.095 9765.095 987
Mounting angles 482.6 mm (19˝), full installation 2 7685.000 7688.000 7688.000 7685.000 7688.000 7688.000 1093
Installation kit for mounting angles 2 7696.000 7696.000 7696.000 7698.000 7698.000 7698.000 1093
Heater 800 W 1 9769.080 9769.080 9769.080 9769.080 9769.080 9769.080 709
Thermostat 1 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 715
Semi-cylinder, alternative closure 1 9785.040 9785.040 9785.040 9785.040 9785.040 9785.040 957
77
CS New Basic etwo-door, width 1200 mm
78
CS
New
Bas
ic e
ncl
osu
res
nclosures
B1
T2
T3B3
T1
B2
B2
H2
H1
H4
H3
H5
Ma
terial:Enclosure, roof and doors: 2.0 mm aluminium AlMg3Base/plinth: 3.0 mm aluminium AlMg3Colour:RAL 7035
Protection category:IP 55 to EN 60 529 in conjunction with the gland plates available as accessories; complies with NEMA 3R.
Supply includes:Single-walled enclosure closed on all sides, with open base, 2-point locking via swing lever handle and lock cylinder Version without centre bar:Overlapping doors, lockable door with r/h hinge.Version with centre bar:2 lockable doors,base/plinth, rain canopy, removable centre bar.
Detailed drawing, available on the Internet.
Note:When configuring with partial mounting plates or 482.6 mm (19˝) partial installation, punched rails are required in the enclosure height, see Catalogue 32, page 998.
Width (B1) mm Packs of 1200 1200 Cat. 32, page
Height (H1) mm 1200 1200
Depth (T1) mm 400 500
Clearance width (B2) mm 512 512
Clearance height (H2) mm 1112 1112
Clearance depth (T2) mm 349 449
Rain canopy width (B3) mm 1250 1250
Rain canopy height (H3) mm 55 55
Rain canopy depth (T3) mm 450 550
Base/plinth height (H4) mm 100 100
Overall height (H5) mm 1355 1355
Model No. CS without centre bar 1 9784.620 9784.640
Model No. CS with centre bar 1 9784.520 9784.540
Accessories
Concrete base/plinth 1 9765.089 9765.086 900
One-piece gland plate 1 set 2 x 9785.517 2 x 9785.520 IN 08, p. 84
Gland plate, divided 1 set 2 x 9785.511 2 x 9785.514 IN 08, p. 84
Cable entry plate 2 8800.060 8800.060 1045
Mounting plate for one half of the enclosure 1 9765.092 9765.092 987
Mounting plate 1 9765.191 9765.191 987
482.6 mm (19˝) mounting angles for one half of the enclosure 2 7688.000 7688.000 1093
Installation kit for mounting angles 2 7696.000 7696.000 1093
Heater 800 W 1 9769.080 9769.080 709
Thermostat 1 3110.000 3110.000 715
Semi-cylinder, alternative closure 1 9785.040 9785.040 957
Rittal Innovations 2008/Communication Systems
tal Innovations 2008/Communication Systems
Features
CS modular enclosure II
High-quality corrosion protection thanks to the base
material aluminium in conjunction with a high level of
vandalism protection in a twin-walled design – in this
way, even ambitious concepts may be conveniently
implemented with the modular system.
The standard twin-walled enclosure ensures optimum
protection of the installed components. Cooling units or
heat exchangers may be installed in all doors and side
panels, as well as in the roof. In this way, the hotspots
inside the enclosure receive optimum cooling.
CS
mo
du
lar
encl
osu
re II
Prfeunfosidhin
79
RitPasidm
otection against vandalism – These atures will protect your equipment against authorised access: No point of access r lever-type tools, because the double e panel seamlessly conceals the door ges.
Cpr+
limate control modules in various out-ut categories: For use in the temperature ange from –33°C to +55°C (cooling unit) or 65°C (heat exchanger).
Aeop
fter removing the base/plinth trim, the nclosure may be anchored to the floor n a base plate or lightweight concrete linth.
ssive climate control thanks to doubled e panels and through-flow of the roof
odule with ambient air.
Ut
ser-friendly cable entry front and rear hanks to removable gland plates.
Ru
ittal accessory components facilitate fast, niversal interior installation.
CS
mo
du
lar
encl
osu
re II
CS modular enclos
80
ure II
H1
H4
H3
H5
B1 T1
T3 B3
T2B2
H2
H1
H4
H3
H5
B1
T2
T3B3
T1
B2
B2
H2
Tec
hnical specifications:Basic module: Solid top and sides, solid base with 2 gland plates (width 1200 mm with 4 gland plates). Twin-walled rear panel. Twin-walled door with swing lever handle and 3-point locking, foamed-in PU seal, door stay. Doubled side panel across enclosure. Rear panel is easily dismantled with the door open.Rain canopy, 45 mm high, removable, 25 mm projection on all sides. Base/plinth, 100 mm high.Material:Enclosure, roof and side panel: 2.0 mm aluminium AlMg3Base/plinth: 2.0 – 4.0 mm aluminium AlMg3
Colour:RAL 7035
Protection category: IP 55 to EN 60 529, complies with NEMA 3R.
Supply includes:Twin-walled, fully assembled enclosure, consisting of basic module, roof, side panels and base/plinth.
Note:Modular enclosures with climate control units, as bayed suites, with side doors or rear doors available on request.
Property rights: German patentsno. 196 09 699 and 196 09 704 European patents no. 0 886 899 and 0 886 900 with validity for FR, IT, GB, SE US patents no. 6,109,053 and 5,971,511 South Korean patents no. 0 334 548 and 0 325 930 Japanese patent no. 3 401 015
Detailed drawing, available on the Internet.
Width (B1) mm Packs of 600 800 800 1200 Cat. 32, pageHeight (H1) mm 1200 1200 1600 1200
Depth (T1) mm 600 500 600 600
Clearance width (B2) mm 512 712 712 512
Clearance height (H2) mm 1112 1112 1512 1112
Clearance depth (T2) mm 554 454 554 554
Rain canopy width (B3) mm 700 900 900 1300
Rain canopy height (H3) mm 75 75 75 75
Rain canopy depth (T3) mm 650 550 650 650
Base/plinth height (H4) mm 100 100 100 100
Overall height (H5) mm 1375 1375 1775 1375
Model No. CS 1 9751.625 9751.645 9751.665 9752.625
Accessories
Concrete base/plinth 1 9765.083 9765.084 9765.085 9765.087 900
Mounting plate 1 9765.092 9765.095 9765.096 9765.191 987
Mounting angles, 482.6 mm (19˝) 2 7688.000 7688.000 7690.000 7688.000 1093
Installation kit for 482.6 mm (19˝) mounting angles 2 7696.000 7698.000 7698.000 7696.000 1093
Mounting angles, metric (T-slot) 2 – 7000.240 7000.330 – 1093
Installation kit for metric mounting angles 2 – 7000.100 7000.100 – 1093
Gland plateSize 4 4 4 4
From 1048Qty. 2 2 2 4
Support rails 4 4396.000 4395.000 4396.000 4396.000 1001
Heater 800 W 1 9769.080 9769.080 9769.080 9769.080 709
Thermostat 1 3110.000 3110.000 3110.000 3110.000 715
Enclosure light 48 V DC 1 9765.150 9765.150 9765.150 9765.150 1029
Rittal Innovations 2008/Communication Systems
Installation variants, width 600 mm
CS modular enclosure II
Ma
terial:Enclosure, roof and side panel: 2.0 mm aluminium AlMg3Base/plinth, battery plinth: 2.0 – 4.0 mm aluminium AlMg3Colour:RAL 7035
Protection category:IP 55 to EN 60 529, complies with NEMA 3R.
For more climate control units, see Cat. 32, from page 883.
Note:Please note the minimum enclo-sure dimensions when making your selection.
The enclosures are manufac-tured to order from individual modules. Delivery times available on request.
CS
mo
du
lar
encl
osu
re II
81Rittal Innovations 2008/Communication Systems
Width (B) mm 600 600 600 600 Cat. 32, pageHeight (H) mm 800 1000 1200 1600
Depth (T) mm 600 500 600 600
Model No. CS 9751.515 9751.575 9751.525 9751.535
Base/plinth
Standard base/plinth 100 mm 9755.515 9755.565 9755.515 9755.515
Battery plinth 350 mm 9754.525 9754.515 9754.525 9754.525
Roof-mounted climate control
Cooling unit 9762.012 9762.012 9762.012 9762.012 883
Heat exchanger 9764.012 9764.012 9764.012 9764.012 884
Mounting frame for heat exchanger or cooling unit 9765.051 9765.051 9765.051 9765.051
Climate hood 9756.515 9756.565 9756.515 9756.515
Wall-mounted climate control
Cooling unit – – 9761.012 9761.012 883
Heat exchanger – – 9763.012 9763.012 884
Roof
Standard roof 9757.515 9757.565 9757.515 9757.515
Roof for wall-mounted climate control – – 9758.015 9758.015
Side panel
Side panel for basic enclosure 9753.515 9753.675 9753.535 9753.545
Order example: Enclosure 600 x 800 x 600 mm of aluminium AlMg3 with standard base/plinth and roof-mounted cooling unit.
You will need:
Enclosure: Basic enclosure 600 x 800 x 600 mm CS 9751.515
Base/plinth: Standard base/plinth 100 mm CS 9755.515
Roof-mounted climate control: Roof-mounted cooling unit CS 9762.012
Mounting frame CS 9765.051
Climate hood CS 9756.515
Roof: Standard roof CS 9757.515
Side panel: Side panel for basic enclosure CS 9753.515
CS moduInstallation va
CS
mo
du
lar
encl
osu
re II
lar enclosure IIriants, width 800/1200 mm
Ma
terial:Enclosure, roof and side panel: 2.0 mm aluminium AlMg3Base/plinth, battery plinth: 2.0 – 4.0 mm aluminium AlMg3Colour:RAL 7035
Protection category:IP 55 to EN 60 529, complies with NEMA 3R.
For more climate control units, see Cat. 32, from page 883.
Note:Please note the minimum enclo-sure dimensions when making your selection.
The enclosures are manufac-tured to order from individual modules. Delivery times available on request.
82 Rittal Innovations 2008/Communication Systems
Width (B) mm 800 800 800 800 1200 1200 Cat. 32, pageHeight (H) mm 1000 1200 1200 1600 1200 1200
Depth (T) mm 500 500 600 600 500 600
Model No. CS 9751.585 9751.545 9751.555 9751.565 9752.515 9752.525
Base/plinth
Standard base/plinth 100 mm 9755.525 9755.525 9755.535 9755.535 9755.545 9755.555
Battery plinth 350 mm 9754.535 9754.535 9754.545 9754.545 2 x9754.515
2 x9754.525
Roof-mounted climate control
Cooling unit 9762.012 9762.012 9762.012 9762.012 9762.012 9762.012 883
Heat exchanger 9764.012 9764.012 9764.012 9764.012 9764.012 9764.012 884
Mounting frame for heat exchanger or cooling unit 9765.051 9765.051 9765.051 9765.051 9765.051 9765.051
Climate hood 9756.525 9756.525 9756.535 9756.535 9756.545 9756.555
Wall-mounted climate control
Cooling unit – 9761.032 9761.032 9761.032 9761.012 9761.012 883
Heat exchanger – 9763.012 9763.012 9763.012 9763.012 9763.012 884
Roof
Standard roof 9757.525 9757.525 9757.535 9757.535 9757.545 9757.555
Roof for wall-mounted climate control – 9758.525 9758.535 9758.535 9758.545 9758.555
Side panel
Side panel for basic enclosure 9753.675 9753.525 9753.535 9753.545 9753.525 9753.535
Order example: Enclosure 800 x 1200 x 500 mm of aluminium AlMg3 with standard base/plinth and roof-mounted cooling unit.
You will need:
Enclosure: Basic enclosure 800 x 1200 x 500 mm CS 9751.545
Base/plinth: Standard base/plinth 100 mm CS 9755.525
Roof-mounted climate control: Roof-mounted cooling unit CS 9762.012
Mounting frame CS 9765.051
Climate hood CS 9756.525
Roof: Standard roof CS 9757.525
Side panel: Side panel for basic enclosure CS 9753.525
Rittal Innovations 2008/Communication Systems
5 kW
RiCell fuel cell system
T2 B2
H1
H3
H2
H4
B1
T1
50
Rear view
Application:● Emergency
e.g. for mobcation base
● Indoor and ● Temporary ● UPS applic● Primary pow
power supplies, ile telecommuni- stations outdoor usepower suppliesations
er supplies for short-time deployment
● High-availability applications
Material:Enclosure frame: Stainless steel 1.4301 (AISI 304)Door, side panels, roof: Aluminium AlMg3, powder-coated in RAL 7035
Supply includes:Ready-to-connect fuel cell sys-tem including climate control. Hydrogen supply not included.
Available on request: ● Cascadable up to 4 systems● Output voltage 230 V AC,
24 V DC or 120 V DC● Housing for gas cylinders● Other communication proto-
cols
RiC
ell f
uel
cel
l sys
tem
Width (B1) mm 850
Height (H1) mm 1220
Depth (T1) mm 850
Rain canopy width (B2) mm 920
Rain canopy height (H2) mm 80
Rain canopy depth (T2) mm 920
Base/plinth height (H3) mm 100
Overall height (H4) mm 1400
Weight (kg) 320
Model No. CS 9782.055
Fuel cell
Minimum output 1000 watts
Maximum power output 5000 watts
Output voltage (adjustable) –48.0 to –55.5 V DC
Maximum current limit 115 A DC
Maximum residual ripple ±250 mV, 100 mV RMS
Noise generation < 60 dB(A) at distance of 1 m
Water emission Max. 4.2 l/h
Standby consumption Approx. 200 W at 48 V DC; with heating approx. 800 W
Hydrogen supply
Gas type Hydrogen, purity 99.95 %, class 3.5
Consumption 34 slpm (standard litres per minute) at 3 kW; 63 slpm at 5 kW
Typical autonomy time Freely scalable with bottle batteries;50 l hydrogen at 200 bar equates to approx. 2 h autonomy at 5 kW full load
Input pressure 4.4 to 7.6 bar
Ambient conditions
Temperature range –40°C to +50°C; output reduction: 4.92 kW at +35°C, 4.85 kW at +45°C, 4.55 kW at 50°C
Relative humidity 5 % to 95 %, non-condensing
Height above mean sea level –60 m to 4000 m; from 457 m, output reduction by 75 W per 305 m
Certification CE
Monitoring
Programmable start voltage –48.0 to +55.0 V DC
Programmable start delay Max. 50 sec.
Interfaces RS232 and USB as standard; modem and Ethernet/IP optional
Software (WINDOWS) Graphic user interface with display for status, event log and control
Alarm outputs 4 floating contacts: “H2 low”; “Non-critical error”; “Serious error”; “FC in operation”
83
Sys
tem
acc
esso
ries
System accessorie
s84 Rittal Innovations 2008/Accessories
Base/plinth for FlatBox The base/plinth may be mounted on any FlatBox with a base area of 600 x 600 or 700 x 700 mm. For attachment purposes, the base/plinth may be mounted on the pre-existing thread in the base area of the FlatBox. There is a rear recess pro-vided for cable entry.
Material:Sheet steel
Surface finish:Powder-coated, RAL 7035
Supply includes:4 levelling feet and assembly parts
For base areaPacks of Model No. DKWidth
mmDepth mm
600 600 1 7507.750
700 700 1 7507.755
Gland plates for CS New Basic enclosures For sealing the base opening and for cable entry.
Material:One-piece: AluminiumDivided: Sheet steel, zinc-plated, passivated
Surface finish:Divided: Powder-coated, RAL 7035
Supply includes:Assembly parts.
For enclosure dimensions Packs
of
Model No. CS
Width mm
Depth mm One-piece Divided
600 400 1 set 9785.517 9785.511
600 500 1 set 9785.520 9785.514
800 400 1 set 9785.518 9785.512
800 500 1 set 9785.519 9785.513
1200 400 1 set 2 x 9785.517
2 x 9785.511
1200 500 1 set 2 x 9785.520
2 x 9785.514
Partition for TS Size extension, now also for 800 mm depth.
For detailed information see Cat. 32, page 921.
For enclosuresModel No. DKHeight
mmDepth mm
2000 800 7831.718
System accessories
85Rittal Innovations 2008/Accessories
Sys
tem
acc
esso
ries
Door, interior for CS New Basic and CS Modular enclosures As a vertically hinged and lockable trim panel, to accommodate switches, buttons and operating panels. Mounted with r/h or l/h hinge in a 600 mm or 800 mm wide enclosure. In 1200 mm wide en-closures, a central punched rail should be used to retain the lock.
Material:Aluminium, 2 mm
Supply includes:Assembly parts.
For enclosure dimensionsModel No. CSWidth
mmHeight
mm
600/1200 800 9785.031
600/1200 1200 9785.032
600/1200 1600 9785.033
800 800 9785.034
800 1200 9785.035
800 1600 9785.036
Sheet steel glazed door, vertically dividedfor TS With underlaid viewing panel, 4-point locking rod and comfort handle for semi-cylinder with secu-rity lock 3524 E. The divided design allows room-optimised siting of the enclosures coupled with the best possible access, thanks to a reduced distance between the individual bayed enclosure suites. Max. door opening angle, thanks to pre-integrated 180° hinges TS 8800.190.
Material:Sheet steel, viewing window toughened safety glass, 3 mm
Surface finish:Powder-coated, RAL 7035
Protection category:IP 55
Supply includes:Assembly parts.
Note:Height 2200 mm cannot be combined with swing frame 45 U.
For enclosuresModel No. DKWidth
mmHeight
mm
800 2000 7824.280
800 2200 7824.282
Door stay for escape routes TS sheet steel/stainless steel doors with tubular door framesIn case of an emergency, conventional door stays can block the escape route. The new stay is actu-ated automatically in case of pressure, releasing the door in both directions. In conjunction with 180° hinges, this ensures that no escape routes are blocked by locked doors in case of an emer-gency.
Supply includes:Assembly parts.
Accessories:
180° hinge, see Catalogue 32, page 961/962.
130°90°
180° hinge
Packs of Model No. TS
1 4583.500
System accessoriesS
yste
m a
cces
sori
es
86 Rittal Innovations 2008/Accessories
Cam lock HD Hygienic Design variant for easy, safe cleaning.
Applications: ● Compact enclosures AE stainless steel
(except AE 1017.XXX and AE 1019.XXX). ● May be integrated into customised applica-
tions, e.g. covers of machine panels.
Material:Stainless steel 1.4404 (AISI 316L)
Accessories:
Enclosure key HD, see Cat. 32, page 301.
Ø 28
1727 5.5 20
15
2.5
6.5
SW
27
19
35
18.5
Ø 2
2.3
Packs of Model No. HD
1 2304.010
Lock insert HD Version FHygienic Design version.
Applications: ● Baying system TS 8 ● PC enclosure systems, based on TS 8 ● Industrial Workstations, based on TS 8 ● Comfort handles for lock inserts
Material:Stainless steel 1.4404 (AISI 316L)
Available from October 2008.
Accessories:
Enclosure key HD, see Cat. 32, page 301.
Packs of Model No. HD
1 8611.400
Sloped attachment HD for TS 8 For retro-fitting individual or bayed TS 8 enclo-sures of sheet steel, spray-finished, or stainless steel.
Properties: ● Height, front: 35 mm. ● Roof projection, front: 8 mm. ● Maximum possible opening at the baying point
to the neighbouring roof.
Protection category:IP 55 to EN 60 529, complies with NEMA 12.
Supply includes:Assembly parts and all required seals.
Version Packs of
Model No. HD
Stainless steel 1.4301 (AISI 304), brushed, grain size 400 1 4000.039
Stainless steel 1.4404 (AISI 316L), brushed, grain size 400 1 4000.049
Sheet steel, spray-finished, RAL 7035 1 4000.059
Delivery times available on request.
Design code number
– – –
Roof tilt 1 – 30°
(EHEDG standard)2 – 45°
Enclosure width mm1)
Enclosure depth mm
Assembly (viewed from the front)1 – for free-standing enlosure2 – for bayed end enclosure, left2) 3 – for bayed end enclosure, right2) 4 – for bayed enclosure, centre2)
1) Max. 1200 mm2) Each with a T-section seal and connection accessories.
Example: Sloped attachment HD, 30° roof tilt, for TS 8 free-standing enclosure with width x depth 800 x 600 mm.
– – –1 800 600 1
System accessories
Sys
tem
acc
esso
ries
87Rittal Innovations 2008/Accessories
B1
Rails for interior installationfor compact enclosures HDFor mounting on the existing threaded bolts. With TS system punchings on three sides.
Material:Sheet steel, zinc-plated, passivated
Supply includes:Assembly parts.
Length mm
Packs of
Model No. CM/HD
260 2 4000.500
510 4 5001.050
710 4 5001.051
910 4 5001.052
1110 4 5001.053
Interior installation, door
Enclosure Model No.
HD 1307.600/.500 HD 4000.500 – – –
HD 1308.600/.500 HD 1310.600/.500 – HD 4000.500 – –
HD 1316.600/.500 CM 5001.052 – CM 5001.050 CM 5001.050
HD 1317.600/.500 CM 5001.053 HD 4000.500 CM 5001.051CM 5001.050
CM 5001.051CM 5001.050
1 1 1 1
Bars for door installation
Interior installation, enlosure
Enclosure Model No. TS
HD 1308.600/.500 8612.140 4694.000
HD 1307.600/.500 8612.150 4695.000
HD 1310.600/.500 8612.160 4696.000
HD 1316.600/.500 HD 1317.600/.500 8612.065 –
HD 1308.600/.500HD 1310.600/.500 HD 1316.600/.500 HD 1317.600/.500
Enclosure
CM 5001.050 CM 5001.052 CM 5001.053
HD 1316.600/.500 HD 1317.600/.500
Enclosure
TS 8612.130 (only on lock side)
TS 8612.400TS 8612.410
2 3
1
4
5
3
14
2
5
1
System accessoriesS
yste
m a
cces
sori
es
88 Rittal Innovations 2008/Accessories
Vent coverThe ideal addition for incorporating sealed racks into an existing central climate control system. The stepped connection is suitable for standard pipe diameters 150 mm and 200 mm, thereby ensuring effective cooling thanks to targeted air exchange inside the rack.
Material:PET-G, transparent
Design:Diameter of hose connection: 150 mm/200 mm Maximum cut-out on roof plate: 380 mm x 230 mm
Supply includes:Assembly parts.
Rittal service:
Mounting on the enclosure on request.
Width mm
Height mm
Depth mm
Packs of
Model No. DK
450 144 300 1 7826.750
Delivery times available on request.
Fan unit, active for TE For use in the prepunched cut-out. An additional fan may optionally be integrated. Thermostat for temperature-dependent control is included. Open connection cable for direct connection, or for connecting a country-specific plug.
Technical specifications for one fan: See fan expansion kit, Cat. 32, page 703.
Technical specifications of thermostat: Rated operating voltage: 250 V Temperature range: +5°C to +55°C.
Supply includes:Fan unit, assembly parts, 2 fans, 1 thermostat, and connection cable.
Accessories:
Fan expansion kit, see Cat. 32, page 703.
For enclosures W x D mm
No. of fans, pre-wired
Possible number of fans
Model No. TERAL 9005
All sizes available 2 3 7000.671
Noise protection kitfor TS Noise insulating mats for equipping or retro-fitting existing network enclosures. Thanks to their self-adhesive rear, the noise insu-lating mats are conveniently attached to existing surfaces. Sound is absorbed, for significant noise reduction. The kit is designed to reduce noise from the roof, sides and rear of an enclosure with dimensions WHD 800 x 2000 x 800 mm.
Other dimensions can be accommodated by cutting to size individually.
Material:Polyurethane, self-adhesive rear
Colour:Anthracite
Supply includes:Spacer bolts for sound decoupling of the roof plate.
Note:Pre-configured enclosures available on request.
For enclosures W x H x D mm Model No. DK
800 x 2000 x 800 7824.650
System accessories
Sys
tem
acc
esso
ries
89Rittal Innovations 2008/Accessories
Component shelves, heavy duty 482.6 mm (19˝) for TE, TS, FR(i) Size extension, now also for 400 and 600 mm depth.
Load capacity: 100 kg surface load, static.
For detailed information see Cat. 32, page 1019.
Width mm
Height mm
Depth mm Model No. DK
409 45 400 7063.894
409 45 600 7063.896
Component shelf 1/2 U, depth-variable Now also available in RAL 9005.
Load capacity: 50 kg surface load, static.
For detailed information see Cat. 32, page 1020.
Distance between levels mm Model No. DK
600 – 900 7063.725
Mounting kit, depth-variable for 482.6 mm (19˝) component shelves (heavy duty) Size extension, now also for a distance between levels of 490 – 710 mm.
For detailed information see Cat. 32, page 1023.
Length mm Load capacity Model No. DK
490 – 710 100 kg 7063.892
System accessoriesS
yste
m a
cces
sori
es
Compact light ULSlimmer – Faster – Brighter ● Slimmer: Around 50 % less height and depth
and also around 75 % less volume than con-ventional lights.
● Faster: Universal fast attachment via clips, screws, or powerful magnets (optional). Simply slide in at the side or rear, fit the light, and it’s done!
● Brighter: Up to 75 % greater luminous effi-ciency from the lamp at the same output helps to cut electricity costs.
● Door-operated switch can also be connected via a 2-pole connection.
● Cable routing on the back of the light enables deflection, e.g. when mounted vertically in a TS 8.
Material:Enclosure: PC-ABS (halogen-free)Light cover: Polycarbonate (halogen-free)
Colour:Similar to RAL 7035
Protection category:IP 20 to EN 60 529
Supply includes:Compact light with clip and screw mounting kits, including assembly parts.
Accessories:
Mounting kit magnet,see below.Door-operated switch with connection cable,see page 90.
Model No. SZ 4140.210 4140.220
Rated voltage 100 – 240V AC ±10 % at 50 – 60 Hz
Wattage 8 14
Protection category II (all-insulated)
Width (B1) mm 455 705
Mounting distance clip/magnetic attachment (B2) mm 400 650
Mounting distance screw attachment (B3) mm 475 725
Connection cable 3 m (open end)
Cover colour Grey
Rated current (A) – at 230 V AC – at 110 V AC
0.045 – 0.088 0.083 – 0.149
0.073 – 0.127 0.149 – 0.216
Light Fluorescent lamp T5
Operating unit Wide-range electronic ballast
Switches Integral, on/off/door-operated switch mode
Light cover Transparent, grooved on the inside
cURus � �
Clip/magnet Screw
B1 24
Available from November 2008.
Side attachment
Rear fastening
A
B
attachment a
ttachmentSystem lights
90 Rittal Innovations 2008/Accessories
B3
Ø 6.5
B
A
B2 B
AAA B
59
Mounting kit magnetFor reliable adhesion on all sheet steel surfaces.
Packs of Model No. SZ
2 4140.000
Door operated switch with connection cable UL
Colour:Grey
Length mm Packs of Model No. SZ
600 1 4315.720
System accessories
Sys
tem
acc
esso
ries
System lights
91Rittal Innovations 2008/Accessories
Technical specifications Socket Width mm
Height mm
Depth mm Model No. SZ Approvals
14 kW, 120 V, 60 Hz USA 452 117 504138.240
cURus4138.2501)
18 kW, 120 V, 60 Hz USA 682 117 504138.280
cURus4138.2901)
30 kW, 120 V, 60 Hz USA 987 117 504138.400
cURus4138.4501)
With fluorescent lamp, socket G13, length 375/604/908 mm. 1) With door-operated switch.
Standard light ULWith assembly parts for mounting:● On the enclosure profile:
For TS, horizontally (directly), or vertically in conjunction with an adaptor angle
● Directly onto rail systems with 25 mm system punchings
● In AE, CM and TP using universal bracket SZ 2373.000
Light: Universal white
Protection category:IP 20 to EN 60 529
Also required:
Connection accessoriessee page 92.
Accessories:
Adaptor bracket, see Cat. 32, page 1005. Universal bracket, see Cat. 32, page 1009.
Available from November 2008.
Components Standard light
Sockets and connectors for:
– Power supply �
– Through-wiring �
– Door-operated switch: Connection facility/integral �/�
Interference suppression via:
– Radio interference suppression capacitor �
Additional manual switching with rocker or slide switch �
System accessoriesS
yste
m a
cces
sori
es
Connection accessories The following components can be used for time-saving and simple installation of the lights:
Note:For technical reasons, the current door-operated switches are being replaced by a new generation.
Connection cable for UL Length
mmPacks
ofModel No. SZ
Orange Yellow Grey
Power supply (with socket, without connector) 3000 5 4315.100 4315.110 –
Power supply (with socket and strain relief, without connector) � 3000 1 – – 4315.1501)
Through-wiring (with socket and connector) � 600 1 – – 4315.4501)
Through-wiring/power supply via connection component SZ 2507.500 (with socket and connector)
6005
4315.400 4315.410 –
1000 4315.200 4315.210 –
4000 1 4315.600 4315.610 –
1
1
2
2
Door-operated switch With toggle UL Technical
specifications Packs of Model No. SZ
Without connection cable, for TS enclosures with installed large swing frame. The toggle is actuated via the tubular door frame of the sheet steel door, or in the case of glazed doors, via an adaptor included with the supply.
� 240 V AC, 6 A125 V DC, 8 A 24 V DC, 6 A
1 4127.210
1) Available from November 2008.
5
Connection component with circuit-breaker 10 A Packs of Model No.
SZ
Reduce assembly costs: Power is supplied rapidly and reliably to system and workstation lights via connection cables. For self-configured cables, connector SZ 2507.200 must be used. Connection component to be snapped onto the top hat rail.
1 2507.500
Door-operated switch With mounting accessories UL Length
mmPacks
ofModel No. SZ
Orange Yellow Grey
With connection cable (not required for universal lights and standard/courtesy lights with integral door-operated switch)
600
1
4315.5201) 4315.5301) –
1000 4315.3201) 4315.3301) –
� 600 – – 4315.5501)
1000 – – 4315.3501)
Without connection cable � – 4127.0101)
With connection cable (for compact light)
6001
– 4315.7101) –
� 600 – – 4315.7201)
Also required
Mounting kit for installation in HPModel No. FR
7952.100
3
4
For self-assembly Packs of Model No.
SZ
Sockets for power supply through-wiring
5
2507.100
Connectors for connection component through-wiring 2507.200
T distributor with 2 sockets, 1 connector 2507.300
Connector for door-operated switch cable 2507.400
Connection cable for infeed
Connection cable for through-wiring/infeed
Door-operated switch with connection cable
1
2
3
1 23
Connection accessories
92 Rittal Innovations 2008/Accessories
1 + 2
3
4
5
Rittal Innovations 2008/Accessories
System accessories
Sys
tem
acc
esso
ries
Earthing strap for buildings Flexible flat strap for connecting the enclosure frame to the building’s earth rail, e.g. in a raised floor.
Material:Copper, tin-plated
Supply includes:1 set = earthing strap for connection M8, central earthing point, plate clamp.
Packs of
Cross-section mm2
Length mm Model No. DK
1 set 35 1500 7829.210
Plastic cable gland plates With pre-punched holes for cable glands. Used for sealing standard gland plates. Temperature range: suitable for use from –40°C to +70°C.
Colour:RAL 7035
Note:The applicable size may be taken from the respective product ordering page.
Metric holes
7
70 56
11025
160120
330
45 120
757.
5
90
339
12012049.5
813
3
149
11045 110 110 110
530
813
3
149
M12
M16
M20
M25
M32
M40
M50
Metric holes
Size 1 Size 3
Size 4 Size 5
Size Packs of Model No. SZ
1 10 2560.010
3 10 2561.010
4 5 2562.010
5 5 2563.010
Cable management panel 482.6 mm (19˝) For horizontal management of the patch cables, with 5 cable shunting rings, supplied fitted. Particularly suitable for use with limited space in front of the 482.6 mm (19˝) level.
Material:Panel: Sheet steel Ring: Sheet steel, zinc-plated, passivated
Colour:RAL 7035
U Ring size mm Model No. DK
1 40 x 50 7257.200
93
System accessoriesS
yste
m a
cces
sori
es
Gland plate module, multi-piecefor side cable entry for TS/FR(i) With sliding plates on both sides for cable entry. Side cable entry allows direct transition into verti-cal cable routing e.g. on cable routes, cable ducts or cable guide rails. The open cable entry at the side also supports retrospective dismantling of the module plate, even with the cable already inserted. Flexible arrangement of the base module is sup-ported, thanks to various different module combi-nations.
Material:Sheet steel, zinc-plated, passivated
Supply includes:Assembly parts.
For enclosurewidthmm
Packs of Model No. DK
600 1 7825.368
800 1 7825.388
Roof plate, multi-piece for side cable entry in TSThe roof plate allows side cable entry on both sides across the entire enclosure depth. Sliding brackets at the sides allow variable adaptation of the entry opening. Additional rubber cable clamp strips secure the inserted cable bundles and cable sections. The multi-piece design allows convenient retro-fitting, as the roof plate is removable even with the cables already inserted. Passive ventilation is supported by raising the roof with spacers.
Material:Sheet steel, spray-finished
Colour:RAL 7035
Supply includes:Assembly parts.
Accessories:
Spacers, see Cat. 32, page 974.
For enclosuresModel No. DKWidth
mmDepth mm
600 900 7526.697
600 1000 7526.607
600 1200 7526.6271)
800 800 7526.887
800 1000 7526.807
800 1200 7526.8271) 1) Delivery times available on request.
Cable route, vertical for TS/FR(i) For direct attachment between the roof and base frame of a 2000 mm high frame structure. Installation position optionally on the inner or outer mounting level. Route width 200 mm. With integral system punchings for the attach-ment of various cable routing aids and hammer-head attachment for nylon loops and cable ties.
Material:Sheet steel, zinc-plated, passivated
Supply includes:Assembly parts.
Packs of Model No. DK
1 7858.200
94 Rittal Innovations 2008/Accessories
System accessories
Sys
tem
acc
esso
ries
Cable ductfor TS/TE For laying cable in particularly high packaging densities (high density network nodes), in the field of optical fibre or copper cabling. Large capacity. The options of cable routing, cable clamping, channelling and cross-cabling create the requirements for maximum port den-sity in the minimum possible space. The individual U-related cable routing makes it possible to dispense with additional cable routing via patch panels within the distributor level, thereby equipping every U with connection points. This increases port density by up to 50 %.The removable duct cover, hinged on both sides, facilitates user-friendly access at any time. The cable sections are held back by removable cross-bars to protect them against falling out. Mounting is either on mounting rails at the sides, and on mounting angles and mounting frames in the 482.6 mm (19˝) distributor level. Two ducts may also be secured back-to-back. There is a second, smaller variant available for intensive partial installation.
Material:Cable duct, front trim panel: Sheet steel, spray-finishedCable routing components: Plastic
Colour:RAL 7035
Supply includes:Hinged front trim panel.
Note:When using the duct in conjunction with 482.6 mm (19˝) mounting frames and TS 8, the inner mount-ing level in the vicinity of the cable duct is not available.
SizeW x D mm Qty. U Packs
of Model No. DK
95 x 23524 1 7827.310
42 1 7827.320
Note:Within the duct, additional cable ties may be attached to accommodate spare cables and for system-compatible cable deflection.
Accessories:
Cable ties for spare cables:
Packs of Model No. DK
4 7827.330
95Rittal Innovations 2008/Accessories
System accessoriesS
yste
m a
cces
sori
es
Document drawer compartment for TE, TS Closed drawer compartment to accommodate up to 2 A4 folders with spine width 50 mm, arranged one behind the other. User-friendly slid-ing pullout on telescopic slides, may be secured in both end positions. Lockable. For mounting in the enclosure depth, externally at the sides on 482.6 mm (19˝) mounting angles and 482.6 mm (19˝) mounting frames, on enclosures with a width 800 mm.
Material:Sheet steel
Colour:RAL 7035
Supply includes:Assembly parts.
<
>
Width mm
Height mm
Depth mm Model No. DK
73 365 605 7283.200
Security box, 482.6 mm (19˝) Lockable box for access-protected, secure accommodation of computers or equipment used e.g. for recording sensitive, security-relevant data such as video monitoring or backups. Assembly screws at the front on the 482.6 mm (19˝) level, inaccessibly concealed when the front panel is closed.Passively vented at the front and rear. Cable entry opening at the bottom rear. The mounting distance is infinitely adjustable within the range 250 – 750 mm.
Interior dimensions: W x H x D: approx. 440 x 210 x 590 mm
Material:Sheet steel
Colour:RAL 7035
Note:Active fan unit, DK 7980.100, for optional retrofit-ting.
Width mm Height Depth
mm Model No. DK
482,6 (19˝) 5 U 600 7283.100
Air baffle plates for TS Targeted air routing to the components. Avoids unused air bridges between the warm and cold aisle. Boosts energy efficiency at the same cool-ing output. Mounted all-round on the 482.6 mm (19˝) installa-tion between the 482.6 mm (19˝) mounting frame and modular LCP, LCP Plus, side panel or parti-tion. The width-variable air baffle plates may be individually adapted to suit the requirements. In the variant for 800 mm wide enclosures, verti-cal 482.6 mm (19˝) mounting holes of 3 x 1 U are additionally integrated, which may be used for configuration with additional components. Cable glands with stepped collars distributed across the height facilitate shielded cable routing between the front and rear chamber.In the delivered state, these openings are each covered with a 1 U blanking panel with snap-in fastening.
Material:Air baffle plates: Sheet steel, spray-finished, RAL 7035Stepped collar: Plastic, to UL 94-V0Blanking panel: Plastic to UL 94-V0, RAL 7035
Supply includes:2 side air baffle plates, width-variable1 air baffle plate at the top, horizontalFor W = 800 mm including blanking panel and stepped collar.
For enclosuresModel No. DKWidth
mmHeight
mm
600 2000 7151.206
800 2000 7151.208
96 Rittal Innovations 2008/Accessories
System accessories
Sys
tem
acc
esso
ries
97Rittal Innovations 2008/Accessories
Strengthenerfor desk unit, rear with hinged lid
● Suitable for mounting operating housings using− Enclosure attachment CP-L, Ø 130 mm
CP 6525.5X0, see Cat. 32, page 256 − Enclosure attachment CP-XL, round
CP 6130.6X0, see Cat. 32, page 271 − Housing couplings CP-XL for desk mounting,
CP 6528.4X0, see Cat. 32, page 273
● Easily screw-fastened to the base of the desk unit.
● Connection hole pattern for CP support arm systems in the centre as standard; other posi-tions can be acommodated by drilling extra holes.
Mounting cut-out required in the lid of the desk sections, mounting cut-outs to match the various support arm systems.
Material:Sheet steel
Supply includes:Assembly parts.
Ø 9
Ø 82
45°
592/792
215
1
Ø 9
Ø 112
45°
215
1
180
= =
79
45
Ø 9
215
1
for external mounting of CP 6525.5X0 for external mounting of CP 6130.6X0 for external mounting of CP 6528.400/.410
Mounting cut-outs for the covers of the desk units
Max. dia. 70 mm1
For width mm Packs of Model No. TP
600 1 6730.400
800 1 6730.410
AS interface elementfor signal pillars, modular
User-friendly activation of the signal pillar levels via AS interface.
Benefits: ● Standard slave.● Max. 31 addresses.● Up to 4 signal levels may be activated.● Power supply may be switched from internal
bus supply to external auxiliary voltage. ● With programming interface.● Wiring and commissioning work is significantly
reduced.● For mounting directly on the connection com-
ponent of the signal pillar.
Extended delivery times.
Material:Polycarbonate
Colour:Black, transparent
Protection category:IP 54 to EN 60 529
Also required:
Connection components, see Cat. 32, page 1126.
Ø 70
65.5
56
1
Pre-configured seal1
3
4
5
0
1
2
Connection diagramU external (–)
ASI (+)
ASI (–)
U external (+)
Version Packs of Model No. SM
Standard slave 1 2376.100
Technical specifications:
Voltage supply
AS interface element Via bus cable
Operating voltage 18.5 V DC to 31.6 V DC (to AS interface specification)
Polarity reversal protection Built-in
Watchdog Built-in
External auxiliary voltage 24 V DC +/–10 %
Auxiliary voltage internal external
Current carrying capacity max. 200 mA 200 mA per element
Current rating max. 250 mA 75 mA
Voltage on signal element 18 – 31 V DC 24 V DC +/–10 %
Short-circuit/overload protection Built-in Pre-fuse M 1.6 A
Temperature range –20°C to +50°C
System accessoriesS
yste
m a
cces
sori
es
98 Rittal Innovations 2008/Accessories
Mounting components for conduit mounting
Material:Polyamide, fibreglass-reinforced
Protection category:IP 54 to EN 60 529
Supply includes:Seals and tube.
Also required:1) Connection adaptor SG 2372.120, see Cat. 32, page 1125. 2) Connection component SG 2368.000, see Cat. 32, page 1126.
Mounting component ColourSuitable for signal pillar
Model No. SGLED compact modular
Base, tiltable from 0° – 90° in 7.5° increments Black �1) �2) 2374.090
Simple cable entry up to a cable diameter of 14 mm.
Ø 54Ø 70
71
117
Ø 25
Ø 70
77
TFT holdervertically hinged
Suitable for mounting TFTs with VESA 75/100 adaptation up to 20.1˝ in● PC cases based on TS and ES ● Other enclosures based on TS
The TFT support is attached to the upper horizon-tal enclosure section using suitable fitted bars and/or punched sections.The integral swing mechanism allows the TFT to be swung forwards out of the enclosure while operational, to provide access to the equipment behind it. The display on the TFT remains visible even after it has been swung forwards. The length of the actuator handle is adjustable to adapt to the size of the TFT.
Material:Sheet steel
Supply includes:Assembly parts.
Extended delivery times.
300
25 25
170
125
75
300
275
100
75
5.1
75100
2536
25
360
– 42
0
234
126
195.
5
1
Monitor height adjustment range
Actuator handle
1
2
2
Top view from above Front viewSide view, installed state
Packs of Model No. SM
1 2383.040
Also required:
For enclosure
depth mm
Based on TS punched rail TS
18 x 38 mm
Based on ES punched section
with mounting flange PS 23 x73 mm
400 8612.240 4369.000
500 8612.250 4370.000
600 8612.260 4371.000
800 8612.280 4372.000
System accessories
Sys
tem
acc
esso
ries
Optical mouse IP 68Input device for all areas where heavy contamina-tion is unavoidable or where exceptional stand-ards of hygiene are crucial.
Benefits: ● High-quality silicone surface. ● Integral optical scanning.● Sealed on all sides ● Mechanical operating parts completely impervi-
ous to dirt.● Easy to clean.● Also suitable for use in hygiene-sensitive areas.
Technical specifications:● Optical scanning (with 800 dpi resolution)● Silicone enclosure with high-quality surface
coating● Disinfectable ● Application area: from –40°C to +90°C
Protection category:IP 68 to EN 60 529
Material:Silicone top
Colour:Similar to RAL 9002
Supply includes:USB connection cable, cable length 1800 mm.
Accessories:
Connector gland (SZ 2400.500), see Cat. 32, page 1057.Support for mousepad (SM 2381.000), see Cat. 32, page 1145.
Connection Packs of Model No. SM
USB 1 6445.100
PS2 – on request
RiCAD 3D Version 2.0
The download platform for seamless integra-tion of Rittal CAD data into your plant designs Irrespective of which CAD system you use, RiCAD 3D effectively supports the efficiency and productivity of your plant design.
● Considerable reduction of engineering and design work
● Shorter assembly times● Error-free detailed Rittal data● Generic original files in 2D and 3D format –
no conversion of neutral formats
CD-ROM with CAD data for the following formats:● AUTOCAD DWG, DXF (>R12)● ProE 2001● ProE Wildfire● SolidWorks 3D (= 2003)● SolidWorks 3D (≥ 2004)● EPLAN Cabinet● Neutral Step format● 2D-DXF
Online access to original data for virtually any CAD system via:www.rittal.com/RiCAD3D
New in Version 2.0: ● TopConsole● Free-standing enclosure ES 5000● Accessories TS 8, CM, TP ● Improved software platform
Supply includes
CD-ROM
Language: German/English/Russian/Chinese
Model No. SZ 2406.110
99Rittal Innovations 2008/Accessories
Technical detailsTe
chn
ical
det
ails
ConsolesPage 14/15
225
49.8
TTP 6720.200, TP 6721.200, TP 6722.200, TP 6723.200
P 6720.100, TP 6721.100, TP 6722.100, TP 6723.100Max. installation depth 415 mm
1
Deep console TP used in conjunction with TP desk unit and pedestal D = 500 mm
Deep console TPwhen mounting directly on pedestal D = 500 mm
450
CP 6690.600/CP 6691.600 CP 6690.610/CP 6691.610
A
575
View A for CP 6690.600/CP 6691.600
Not applicable to CP 6690.600/CP 6690.610
Welded stud for the attachment of mounting bracket CP 6205.100
Max. installation depth 185 mm
Reinforcement plate always on the support arm connection point
1
2
3
4
100 Rittal Innovations 2008
486
425
413
784 71
6
665
636
575
563
210
14°
14°
225
49.8
486
425
413
557
477
465
425
387
587.
5
565
1
1
450
19
538/
383
137.
529
0
1
160
191
207
2.5
492/
337
222
57 90.5
228
137.5
182
2.5
24
30°
Ø 7
Ø 82
Ø 70
495
191
80
2.5 2.5
3
Quickline panel with keyboard housingPage 21
Technical details
Tech
nic
al d
etai
ls
101Rittal Innovations 2008
Thermoelectric coolerPage 33
External mounting Internal mounting
100
(8.5)
(12.5)
377
125
108
Ø 6.540
0
386
30
15
11.5 8
125
400
15
108
377
85
11.5
(20)
Ø 6.5
(12.5)
85
30
25.5
115
166.
5
100
1
Outer contour of climate control unit 1
1
Technical detailsTe
chn
ical
det
ails
102 Rittal Innovations 2008
Chiller for IT coolingCooling output 15000 to 48500 W Page 44 Key to the adjacent drawing:
Compressor with oil sump heater
Duo pressure monitor LP/HP
Condenser with fan
Non-return valve
Pressure sensor
Expansion valve
Inspection glass
Magnetic valve
Filter dryer
Evaporator coil
Safety assembly
Flow monitor
Thermostat
Draining/filling
Pressure relief valve
Bypass valve
Manometer
Pump
Return IN
Inlet OUT
Tank
Refrigerant collector
2
10
4
6
78
5
9
1
1112
13
14
15 16
17
18
19
2021
22
4
5
3
Controller
FU
FU
PA
PA
FC PI
2
10
3
4
6
78
5
9
1
1112
13
14
1516
17
18
19
2021
FU
PA
PA
FU
68
9
7
3
2
1
Controller
PI
4 5
FC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Cooling output 61000 to 462000 W Page 44/45 Key to the adjacent drawing:
Compressor with oil sump heater
Duo pressure monitor LP/HP
Condenser with fan
Non-return valve
Pressure sensor
Expansion valve
Inspection glass
Magnetic valve
Filter dryer
Evaporator coil
Safety assembly
Flow monitor
Thermostat
Draining/filling
Pressure relief valve
Bypass valve
Manometer
Pump
Return IN
Inlet OUT
Tank
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Technical details
Tech
nic
al d
etai
ls
103Rittal Innovations 2008
140
60/70
280
611
255
650
653
282
= =
520
699
==
(66.
5)
23
328
(x8) 8 Ø
57
254
21.5
215
105
650
25462
4
75.5
8107
Ø 8 (8x)
10536
2.5
74
118
254
400
250
18036.5
180
950
920
345
160 20
30
385
255
280
50
327
Ø 40 (2x)
27.5
327
Ø 9.5 (8x)
750
250
250
250
999
402
448
23
953
402
Ø 8 (12x)
920
39.5
619
190.5
28
10
30
370
365
160
127
175
39.5 175
198
Ø 8 (7x)
60/7
0
1.5
50
7.5
30
7.5
27.5
M6M6
M6
Air/air heat exchangersSpecific thermal output 27 – 98 W/K Page 36
Internal mountingExternal mounting Internal mounting with adjustable frame
T = Depth
Model No. SK T1 T2
3126.424 3126.410 127 60
3128.424 3128.410 140 70
3129.424 3129.410 3130.410 3130.424
150 70
Internal mountingExternal mounting Internal mounting with adjustable frame
Mounting cut-out SK 3126.424, SK 3126.410
Internal mountingExternal mounting Internal mounting with adjustable frame
Mounting cut-out SK 3128.424, SK 3129.424, SK 3128.410, SK 3129.410
1
Microcellular rubber seal EPDM, black 12 mm, as solid all-round rubber seal
1
Technical detailsTe
chn
ical
det
ails
104 Rittal Innovations 2008
1628
1480
402
1582
250
200
448
280
260
260
280
200
Ø 8 (18x)
400
1580
210210
65
395
280
380
275
875
340
260
320
1530
Ø 11 (8x)
Ø 40 (1x)
320
113
205 205
1558
924.
5
97.5
67.5
370
370
400
965
1580
367
215
62.5
200
Ø 8 (8x)
400
250
210
25
210
950
920
345
160
35
35
385
255
280
50
327
25
327
Ø 9.5 (8x)
Ø 40 (2x)
920
37
619
190.5
19.5
10
30
370
365
160
127
180
37 180
215
Ø 8 (7x)75
0
250
250
25099
9
402
448
23
953
402
Ø 8 (12x)
Air/air heat exchangerSpecific thermal output 27 – 98 W/K Page 36
Internal mountingExternal mounting Internal mounting with adjustable frame
Mounting cut-out SK 3130.424, SK 3130.410
Internal mountingExternal mounting Installation with adjustable frame
Mounting cut-out SK 3129.424, SK 3129.410
Rittal Innovations 2008
Model No. Page1199.100 112304.010 862374.090 982376.100 972383.040 982406.110 992507.100 922507.200 922507.300 922507.400 922507.500 922508.100 112537.000 112560.010 932561.010 932562.010 932563.010 933102.170 393105.110 393105.180 393105.190 393105.200 393105.210 393105.220 393105.230 393106.120 393107.150 393107.160 393115.130 393116.140 393126.410 363126.424 363128.410 363128.424 363129.410 363129.424 363130.410 363130.424 363201.030 493201.050 493201.200 333201.300 333232.700 443232.710 443232.720 443232.730 443232.740 443232.750 443232.760 443232.770 443232.780 443232.790 443232.800 453232.810 453232.820 453232.830 453232.840 453232.850 453232.860 453232.870 453232.880 453286.230 493286.240 493286.250 493286.260 483286.270 483286.280 483300.160 413300.170 413300.180 413300.510 403300.520 403300.530 403300.540 40
3300.5603300.5703300.5803300.5903300.7103300.7203300.7303300.7403300.7603300.7703300.7803300.7903301.2903301.4603301.4703301.6203301.6303301.6403301.6503301.6603301.6703301.6803301.6903301.7903301.8303301.8403301.8503301.8603301.8703301.8803301.8903301.9803301.9903304.7003304.8003666.0013666.0023666.0033687.7394000.0394000.0494000.0594000.5004127.0104127.2104138.2404138.2504138.2804138.2904138.4004138.4504140.0004140.2104140.2204315.1004315.1104315.1504315.2004315.2104315.3204315.3304315.3504315.4004315.4104315.4504315.5204315.5304315.5504315.6004315.6104315.7104315.7204583.5004911.000
Model No.
List of model numbers
105
4040404040404040404040404343424040404040404040434040404040404042403535313131318686868792929191919191919090909292929292929292929292929292929292
90, 928513
Page4912.000 134916.000 134918.000 134920.000 135001.050 875001.051 875001.052 875001.053 876445.100 996510.320 196510.330 196510.340 196511.050 196511.060 196513.050 196513.060 196690.600 216690.610 216691.600 216691.610 216720.100 156720.200 146721.100 156721.200 146722.100 156722.200 146723.100 156723.200 146730.400 976730.410 976730.600 486740.500 186742.500 186746.500 186748.500 187000.671 887063.725 897063.892 897063.894 897063.896 897151.206 967151.208 967200.210 637257.200 937283.100 967283.200 967320.005 687320.100 63, 667320.111 677320.240 637320.241 637320.242 657320.245 657320.425 637320.440 637320.442 687320.450 637320.470 637320.472 637320.481 637320.505 647320.515 647320.535 647320.585 657320.725 687320.726 687337.510 757337.520 757337.530 757337.540 757337.550 757337.560 757502.436 507502.446 50
Model No. Page7507.750 847507.755 847526.607 947526.627 947526.697 947526.807 947526.827 947526.887 947552.002 737552.122 737552.142 737552.510 727555.100 707555.310 707824.280 857824.282 857824.650 887825.368 947825.388 947826.750 887827.310 957827.320 957827.330 957829.210 937831.718 847831.730 527831.732 527831.740 527831.742 527831.820 517831.822 517831.825 517831.827 517856.510 577856.520 577856.530 577856.540 577856.550 577857.800 557857.801 557857.802 557857.803 557857.804 557857.805 557857.806 557857.807 557857.910 567857.950 567858.200 947859.120 597859.122 597859.125 597859.130 597859.132 597859.135 597952.100 928450.680 128611.400 868806.580 128900.050 138900.060 138900.840 138900.850 139340.030 269340.035 269340.040 269340.230 279340.240 279340.620 279340.820 279340.950 289345.000 299345.010 299345.030 29
Model No. Page9751.515 819751.525 819751.535 819751.545 829751.555 829751.565 829751.575 819751.585 829751.625 809751.645 809751.665 809752.515 829752.525 829752.625 809753.515 819753.525 829753.535 81, 829753.545 81, 829753.675 81, 829754.515 81, 829754.525 81, 829754.535 829754.545 829755.515 819755.525 829755.535 829755.545 829755.555 829755.565 819756.515 819756.525 829756.535 829756.545 829756.555 829756.565 819757.515 819757.525 829757.535 829757.545 829757.555 829757.565 819758.015 819758.525 829758.535 829758.545 829758.555 829765.051 81, 829782.055 839783.510 779783.520 779783.530 779783.540 779783.550 779783.610 779784.520 789784.540 789784.620 789784.640 789785.031 859785.032 859785.033 859785.034 859785.035 859785.036 859785.511 849785.512 849785.513 849785.514 849785.517 849785.518 849785.519 849785.520 84
Model No. Page
Index
AAccessories 84, 99– for climate control 48, 49Active PSM 59Adaptor frame– for wall-mounted cooling units 48Additional attachment– for busbar support SV 9340.030 26Adjustable frame– for air/air heat exchanger 48Aerial, external 63Air baffle plates for TS 96Air/air heat exchangers– Wall-mounted, railway-proof version 36AS interface element– for signal pillars, modular 97
BBars for interior installation– for compact enclosures HD 87Base/plinth– for FlatBox 84Basic CMC 67Basic enclosures CS 76, 78Basic mounting unit CMC-TC 68Battery Manager RiBat 55Baying kit– for KL, AE 11Baying systems TS– Door lock 13– IP 66/NEMA 4x 12– Isolator door cover 13Busbar supports 1-/2-pole 26Bus-mounting fuse base 63 A (3-pole) 28
CCable duct for TS/TE 95Cable gland plates– Plastic 93Cable management panel 482.6 mm (19˝) 93Cable route, vertical for TS/FR(i) 94Cable ties 95Cables AWG 10 27Cam lock HD 86Chiller for IT cooling 44, 45Circuit breaker 10 A– Connection component 90CMC-TC– Basic mounting unit 68– Processing Unit II (PU II) 66– Wireless sensor network 60, 62CMC-TC outdoor handle for CS Toptec 68Cold aisle containment 41Compact light UL 90Component shelf, 1/2 U, depth-variable 89Component shelves, heavy duty 89Conduit– CP-L 19Connecting part CP-L 19Connection accessories– for system lights 92Connection component– with circuit-breaker 10 A 92
Consoles TP 14, 15Cool Efficiency 34, 35Cooling module for LCP Modular 43Cooling units– Cool Efficiency 34, 35– Thermoelectric cooler 32, 33CP-L support arm system– Support arm, height-adjustable 19– Support section, open 19CRAC systems 40Cross members for RiLine60 27CS– Modular enclosure II 79, 82– New Basic enclosures 76, 78
DDigital input, wireless 65Document drawer compartment
for TE, TS 96Door latch mechanism– for bayed suites 13Door stay for escape routes for TS 85Door, internal– for CS New Basic enclosures 85Door-operated switch 92
EEarthing strap (building) 93Enclosure heaters 38, 39Ex-proof climate control systems 37External aerial 63
FFan unit, active for TE 88Filter mat– for thermoelectric cooler 49FlatBox base/plinth 84Front cover for LCP Inline 42Fuel cell RiCell 83Fuse holder (3-pole) 29
GGland plate module, multi-piece 94Gland plates– for CS New Basic enclosures 84– Plastic 93
HHeaters 38, 39Heavy-duty component shelf 89Heavy-duty server rack 51High density cable duct 95High Performance Package 74, 75Humidity sensor, wireless 64Hygienic Design– Cam lock HD 86– Lock insert HD 86– Sloped attachment HD 86
IInterior installation– Bar for enclosure HD 87IP 66 baying systems TS 12IP protective cover for sensor 65IP-Cam network camera 70Isolator door cover 13IT distribution enclosure, PDR flex 56IT wall-mounted distributor, PDR flex 56
KKeyboard/operating housing– Quickline panel 20, 21KVM switches 72, 73
LLCP Inline 42LCP Modular 43Lock insert HD 86
MMeasurement system, wireless 65Metal filters 49MicroTCA Cube 31Mini-comfort handle– for AE with cam lock 11Modular enclosure II CS 79, 82Modular Power Concept PMC 53, 54Monitoring system CMC-TC Master II 68Mounting bracket– for MicroTCA Cube 31Mounting components– for signal pillar 98Mounting kit– Magnet 90Mounting kit, depth-variable– for 482.6 mm (19˝) component shelves
(heavy duty) 89
106 Rittal Innovations 2008
Index
NNEMA 4x, NEMA 4– Enclosures TS 12Network camera 70Network video monitoring 69New Basic enclosures CS 76, 78Noise insulating mats 88
OOM adaptors 65 A 27One-piece consoles TP– Sheet steel 16, 18Optical mouse IP 68 99Outdoor CS 76, 82
PPartition– for TS 84PDR flex IT distribution
enclosure 56PDR flex IT wall-mounted distributor 56Piping systems– in the data centre 46, 47Plastic– Cable gland plates 93Plug-in modules PSM 59Power Control Unit, PCU 59Power Distribution Unit, PDU 57Power infeed– for PoE network components 70Power packs 24 V (DC)– for thermoelectric cooler 49Power splitter for Rittal IP-Cam 70Power System Module PSM 58Protective cover for sensor 65PSM– Active 59– Plug-in module 59PU II Processing Unit 66
QQuickBox wall-mounted enclosures 50Quickline panel 20, 21
RRack-mounted systems– MicroTCA 31Raised-floor, CRAC system 40Rear panel for operating housings– with thermoelectric cooler 22Recooling systems 44, 45Ri4Power 24, 25RiBat, Battery Manager 55RiCAD 3D, Version 2.0 99RiCell fuel cell 83RiLine60– Bar systems 27– Busbar systems 26, 27– Class 29– D-Switch 28RiWatchIT V3 71Roof plate, multi-piece 94
SSecurity box, 482.6 mm (19˝) 96Server rack, heavy-duty 51Server racks 51, 52Sheet steel glazed door, vertically divided– for TS 85Sloped attachment HD– for TS 86Software– RiCAD 3D 99– RiWatchIT V3 71SSC Duo 16 72SSC view8 USB 73Standard light UL 91Stay– Door stay for escape routes 85Strengthener– for desk unit 97Support arm CP-L– Support arm, height-adjustable 19Support section CP-L– Support section, open 19Supports 1-/2-pole 26System lights 90, 92
TTechnical details 100, 104Temperature sensor, wireless 64TFT holder, vertically hinged 98Thermoelectric cooler 32, 33Top-hat rail adaptor– for MicroTCA Cube 31Touchscreen display 43TP– Consoles 14, 15– One-piece consoles 16, 18Tube– CP-L 19Twin cords AWG 10– for OM adaptors 27
UUPS, PMC 800 53, 54
VVent cover 88Video monitoring 69, 70Video systems 70Video technology 69
WWall mounting bracket– for AE 11Wall-mounted cooling units– Cool Efficiency 35Wall-mounted enclosures,
based on Rittal QuickBox 50Wide-range power pack– for thermoelectric cooler 49Wireless– Access sensor 64– Digital input 65– External aerial 63– Humidity sensor 64– I/O unit/repeater 63– IP protective cover 65– Measurement system 65– Sensor network 60, 62– Temperature sensor 64
107Rittal Innovations 2008
We reserve the right to further develop-ments and technical modifications of our products. Such modifications, along with errors and printing errata, shall not constitute grounds for compensation. We refer customers to our Terms of Sale and Delivery.
R
Switch to perfection
Rit
tal
Inn
ov
ati
on
s 2
00
8
Rittal –
Innovations 2008
All supplements to Rittal Catalogue 32
R
08/0
8
�
E98
4
Rittal GmbH & Co. KGPostfach 1662D-35726 HerbornTelephone: +49(0)2772 505-0Telefax: +49(0)2772 505-2319eMail: [email protected]
nh001_gb_herb.fm Seite 1 Freitag, 15. August 2008 8:02 08