INF - MEC - DP - EMPAQUETADURA UTEX 220 USA.pdf
1
Calle Los Talladores 176, Urb. Industrial El Artesano, Ate, Lima - Perú Telf.: (+511) 436-8866 Fax: (+511) 436-8444 E-mail: [email protected] Utex Style 220 TexLok® interbraid*, impregnated with PTFE throughout. The PTFE suspensoid fills and seals all voids around the spun aramid packing. Style 220 is available in the following cross-section range: 1/8" to 1 1/2" 3.0 mm to 38.1 mm Performance ROTARY RCIPROCATING VALVE Max Pressure – psi / bar/ Kg/cm2 350/24.1/24.6 3500/241/246 3500/241/246 Temp - °F / °C -320°to+550°F(-195°to+288°C -320°to+550°F(-195°to+288°C -320°to+550°F(-195°to+288°C pH Range 2 a 12 2 a 12 2 a 12 Max Speed – fpm (mps) 4500 ( 22.8 ) 600 ( 3 ) 200 ( 1 ) Applications UTEX Style 220 is suitable for a wide range of chemicals, solvents, and most general plant service applications. Style 220 is recommended for rotary and centrifugal shafts, reciprocating applications, and valves. * Any Texlok® interbraid smaller than 1/4" (6.0 mm) will be square braided construction.
-
Upload
rafo-vega-guerovich -
Category
Documents
-
view
19 -
download
2
Transcript of INF - MEC - DP - EMPAQUETADURA UTEX 220 USA.pdf
Calle Los Talladores 176, Urb. Industrial El Artesano, Ate, Lima - Perú Telf.: (+511) 436-8866 Fax: (+511) 436-8444 E-mail: [email protected]
Utex Style 220
TexLok® interbraid*, impregnated with PTFE
throughout. The PTFE suspensoid fills and seals all voids
around the spun aramid packing.
Style 220 is available in the following cross-section
range:
1/8" to 1 1/2"
3.0 mm to 38.1 mm
PerformanceROTARY RCIPROCATING VALVE
Max Pressure – psi / bar/ Kg/cm2 350/24.1/24.6 3500/241/246 3500/241/246
Temp - °F / °C -320°to+550°F(-195°to+288°C -320°to+550°F(-195°to+288°C -320°to+550°F(-195°to+288°C
pH Range 2 a 12 2 a 12 2 a 12
Max Speed – fpm (mps) 4500 ( 22.8 ) 600 ( 3 ) 200 ( 1 )
Applications
UTEX Style 220 is suitable for a wide range of
chemicals, solvents, and most general plant
service applications.
Style 220 is recommended for rotary and
centrifugal shafts, reciprocating applications,
and valves.
* Any Texlok® interbraid smaller than 1/4" (6.0 mm) will be square braided construction.
