MetalKleen 40L ULTRASONIC CLEANER

Industrial Workshops & Automotive Industry

MetalKleen 40L

1300 79 73 79www.kleentek.net.au

FEATURES AT A GLANCE

Supported in Australia. Certified to Australian standards. Built to last.

AUTOMATIC HEATINGBuilt-in digital thermometer and timer for full temperature and cleaning cycle management

ADJUSTABLE POWERUltrasonic power can be adjusted from low to high

CONTROL PANELUser-friendly control panel for easy and simple operation

LOW LIQUID LEVEL SHUT-OFFBath level controller with shut-off function to ensure safe operation

RINSE TANKBuilt-in rinse tank for easy transferral of parts into rinse solution after cleaning

The MetalKleen series of industrial ultrasonic cleaners by Kleentek are designed specifically to assist with cleaning mechanical and engine components where weir systems are not required.

The stainless steel parts basket included with the MetalKleen 40L will accommodate any part(s) that will fit within the dimensions of 340mm long by 240mm wide and 210mm high (liquid working depth), and up to 15Kgs in total. The whole unit can be easily moved and positioned on large multi-directional poly nylon castor wheels, with easy solution removal via the rear drainage valve.

The combination of ultrasonic cleaning with specially designed cleaning solutions can effectively replace other manual cleaning methods such as kerosene tanks, robo-washers or bead and sand blasting.

The MetalKleen 40L is a powerful and easy to operate machine that can bring immediate benefits and efficiencies to your cleaning processes. Once set up and running, staff are freed up to perform other tasks while the cleaner looks after itself.

• Insulated lid with air-ram assist and noise reduction foam (sound and heat insulated)

• Ultrasonic tank is SUS316 Stainless Steel for superior durability and corrosion resistance, with a 1” two-piece ball valve for easy draining

• Multi-directional poly nylon castor wheels — easily moved around your workshop

• Powered by a high-performance industrial BLT type transducer array for 600W ultrasonic power output

MORE METALKLEEN 40L FEATURES:

MetalKleen 40L

1300 79 73 79www.kleentek.net.au

APPLICATIONS FOR USE

Titanium parts before and after ultrasonic cleaning

Planer blade before and after ultrasonic cleaning

Metal filters before and after ultrasonic cleaning

“We recondition earth moving and mining transmissions and powertrain components. These parts are mainly contaminated with rust and old two-pack paint which needs to be completely removed. Kleentek Ultrasonics has achieved perfect results with contaminants that are really difficult to remove, with fast turn-around times.”

— Chris Gilmore - Powertrain Services

“Saves us an unbelievable amount of labour cleaning rust, paint and scale off pump parts... couldn’t work without it.”

— Matt Crowley, Weir Minerals

• Carburetors and fuel injectors• Hydraulic pump bodies and components• Diesel pumps and components• Filters• CNC cutting tools and saw blades• Outboard and motorcycle heads and

barrels• Gearbox and engine internals

The Metalkleen 40L is a light duty general workshop ultrasonic machine ideally suited to the removal of contaminants such as carbon, old lubricants, scale, rust, resins and paint from smaller parts. Suitable for use in automotive, marine, diesel, hydraulics and small workshops. This includes: Before

Before

Before

MetalKleen 40L

1300 79 73 79www.kleentek.net.au

WHY ULTRASONIC CLEANING?Stop wasting your time on repetitive and laborious cleaning tasks when you could be using your valuable time more productively. These are just some of the benefits of ultrasonic cleaning:

• It cleans faster, reducing the time required for a cleaning cycle and is a superior method for cleaning parts with cavities and blind holes.

• It is efficient and requires less handling of parts - reducing the need for disassembly in order to clean.

• Using water-based detergents reduces the need of harsh solvents which makes the process safer.

• Ultrasonic cleaning requires minimal manual labor intervention, meaning staff are free to carry out other work.

• Ultrasonic cleaning gives consistent results and does not require operator skills.

• Ultrasonic cleaning means non-contact cleaning - only the contamination is removed, not the substrate.

CHEMICAL SOLUTIONS

The following Kleentek chemical products are recommended for use with the MetalKeen 40L in an automotive or engineering workshop environment:

Our full range of ultrasonic cleaning chemicals can be viewed and ordered through our website.

FerrocarbRemoves carbon, paint,

rust and lead deposits on ferrous metals

FX DegreaserRemoves light

contaminates from any surface-oils, dirt, light

carbon

ALLOYSolvRemoves carbon, oils, grease and paint from

alloy and ferrous metals

Anti-RustRust inhibitor rinse

solution

DesludgeRapid penetration and

removal of most soils off all surfaces

Click above to watch the Holden Racing Team video

OFFICIAL SPONSOR OF HOLDEN RACING TEAM

MetalKleen 40L

1300 79 73 79www.kleentek.net.au

TECHNICAL SPECIFICATIONS

Powered by a high-performance industrial

BLT type transducer array

Sturdy and durable Stainless Steel SS304

parts basket

Insulated lid with air-ram assist (insulation reduces operational sound and provides optimum heat retention

and energy efficiency)

Dimensions & Capacity

Overall Unit L1100 x W580 x H830 (mm)

Ultrasonic Tank L500 x W300 x H230 (mm)

Rinse Tank L500 x W300 x H230 (mm)

Parts Basket L360 x W260 x H140 (mm)

Liquid Working Depth

210mm

Bath Capacity 36 Litres

Ultrasonic Tank Components

Transducer Base mounted Industrial BLT Tranducers (900W)

Ultrasonic Power 600W

Solution Heating 10kW Immersion Heaters (316 SS)

Insulation 10mm heat and sound

Probe Pocket Conductivity Level Sensor & Temperature Sensor

Warranty & ServiceKleentek ultrasonic cleaners, when used in accordance with manufacturer’s instructions and under normal use, are guaranteed for one year after date of shipment. Within the period guaranteed, Kleentek will repair or replace free of charge, all parts that are defective because of material or workmanship.

Kleentek cleaners are designed to operate only with non-flammable water-based solutions. We recommend the use of Kleentek’s specialised range of chemical solutions with your MetalKleen unit.

“We have been using a [MK30L] for just over six months cleaning marine carburetors and outboard parts... this machine is invaluable to our workshop”

— Dan, Reef Marine

“I use my [MK40L] on a daily basis removing mainly rust and paint, and also have an anti-rust solution in the rinse tank to stop the cleaned part re-rusting. This is an awesome machine and is a real asset to my business.”

— Gengiz Simsir, GHM Diesel Services

KLEENTEK METALKLEEN RANGE

SAFETY CERTIFICATIONS & COMPLIANCE

30L 40L 150L

Transducer Industrial BLT Type

Digital Timer • • •

Heater • • •

Frequency 28kHz

Power Settings Adjustable

Housing Stainless Steel SUS 304

Bath Capacity 30 Litres 36 Litres 150 Litres

Overall Dimensions L580xD340xH360mm L1100xW580xH830mm L2100xW650xH900mm

Ultrasonic Tank Dimensions L480xW280xH200m L500xW300xH230mm L900xW400xH450mm

Rinse Tank No Rinse Tank L500xW300xH230mm L2100xW650xH900mm

Basket Dimensions L440xW230xH130mm (Liquid depth 130mm)

L360xW260xH140mm (Liquid depth 210mm)

L860xW360xH150mm (Liquid depth 360mm)

Ultrasonic Power 600W 600W 2400W

Net Weight 30Kg 130Kg 260Kg

Power Supply Requirements 10 Amp 10 Amp 15 Amp

Packed Dimensions L660xW460xH460mm L1200xW820xH1140mm L2180xW820xH1140mm

All Kleentek MetalKleen units comply with the approval and test specification - general requirements for electrical equipment - AS/NZS 3100:2009 and AS 4024 - Safety of Machines. Kleentek is an ISO 9001:2008 certified company.

Phone: 1300 79 73 79Email: sales@kleentek.net.auWeb: www.kleentek.net.au

10 / 100 Sugar Road, PO Box 5289Maroochydore QLD 4558

Industrial Ultrasonics | Bin Washers | Rentals | Servicing | Chemicals