Industrial vacuum cleaners powerful, versatile and easy … operations as well, ... The presence of...

Vacuum Cleaner Machines

Professional Cleaning

Industrial vacuum cleanerspowerful, versatile and easy to manage


Central Cleaning Supplies 2

CA2.40CA2.60/SE/SEA

CA2.30CA2.50CA1.25

CA1.30CA1.50

CA30 ON.60/100

CA75 S/SEA

CA3.40CA3.60CA3.100/SE/SEA

CA100T SEA

CA150T SEA

CA30 S/SSCA40 ON.60/100CA40 ON Atex22CA40/SEACAT60 TSP

Comac's industrial vacuum cleaners.Innovative and functional, they help you to resolve anyvacuuming requirements in the industrial environment

Table for choosing the industrial vacuum cleanerthat's most suitable for your needs

The Comac industrial vacuum cleaners are a complete line ofmobile devices able to suck in both small and large quantitiesof liquids and solids. They have been designed for particularlytaxing operations as well, allowing the intake material to bequickly emptied.Easy to handle, powerful, quiet, with single or three-phasepower supply, these vacuum cleaners are the ideal equipmentfor removing dusts, solids or liquids in every situation. The vastrange of accessories allows you to customise each singlevacuum cleaner, adapting it to even the most difficult suction

needs. The table below guides the user in choosing the mostsuitable unit model for his own specific requirements. It's clearthat for intermittent operations, a single-phase vacuum cleaneris sufficient; for the continuous removal of heavier dirt however,or where greater power is necessary in order to reduce the worktimes, the use of a three-phase model is recommended. In addition, it's very important to identify the precise modelsuitable for the type of suction required: Comac gives you achoice of models that remove dust only, or those that canhandle dust and liquids simultaneously.

HEAVYPARTICLES

LIGHTPARTICLES

SMALLPARTICLES

Dust

KEY WORDS:

Liquids

LARGEPARTICLES

SIN

GLE

-PH

ASE

THR

EE-P

HAS

E



230-240

CA1.25

SINGLE-PHASE Industrial Vacuum Cleaners

CA1.25

It is a single-phase vacuum cleaner suitable for using onlight dusts. The capacity of the trolley container, along with thedimensions of the filter and external shaker, make this the mostcompact model of the family of industrial vacuum cleaners,despite using the same accessories (40 mm diameter) as theline of commercial vacuum cleaners.

CA1.30/2.30 - CA1.50/2.50

These are single-phase vacuum cleaners suitable for usingon light dusts.They have a sturdy yet light frame that makes them easy to move.Available with one or two motors. Depending on your particularsuction requirements, you can choose a model with 30-or 50-litre capacity container.

CA2.40/3.40

These are single-phase vacuum cleaners suitable for usingon medium-heavy dusts.The container capacity of 40 litres is recommended when thedust particles are not large.These vacuum cleaners have a particularly sturdy frame, asuction nozzle with a diameter of 70mm, and a filter with afiltering surface of 19,500cm2.They are especially suitable for environments where only asingle-phase voltage is available. Depending on the requireduse, you can choose between the 2- and 3-motor versions.They are also recommended thanks to their front fan. Uponrequest, filters in class M, H, antistatic and heatproof can beassembled.

CA2.60/3.60 - 3.100

These are single-phase vacuum cleaners for dusts andliquids; thanks to their sturdiness, mobility andperformance they are the ìBest Sellersî of the entire range,and can be used in applications that demand the most froma single-phase unit. It is possible to choose from trolley tanksof 60 and 100 litres, 2 or 3 motors, and (upon request)mechanical and/or electronic floats are available whenremoving liquids, to ensure absolute safety. Upon request, filtersin class M, H, antistatic and heatproof can be assembled.

CA1.30/2.30 CA1.50/2.50 CA2.40/3.40 CA2.60/3.60



SINGLE-PHASE Industrial Vacuum Cleaners

CA3.100 CA2.60 SE/2.60 SEA CA3.100 SE/3.100 SEA CA30 ON.60/100

CA2.60 SE/SEA - CA3.100 SE/SEA

These are single-phase vacuum cleaners for dusts andliquids; they are characterised by the possibility of greatercontrol of the outlet air, and greater practicality duringmaintenance operations.In addition to models 2.60 and 3.100, the SE version modelshave an electric shaker operated by a handy button, while theSEA version models are fitted with a sophisticated filter cleaningsystem.

The versions with automatic electric shaker (SEA) have 3working modes:automatic modeWhen the filter becomes less efficient, motor operation isautomatically interrupted and a 20-second filter cleaning cyclebegins. When the cycle has ended, the motors will restartautomatically.Or:manual modeWith the motors switched on, press the shaker button tointerrupt motor operation and begin a 20-second filter cleaningcycle. When the cycle has ended, the motors will restartautomatically.semi-automatic modeEvery time all the motors are switched off, a 20-second filtercleaning cycle begins automatically.Upon request, filters in class M, antistatic, heatproof, H, and amechanical/electronic float can be assembled on these suctionunits.In addition, HEPA cartridge filters can be assembled uponrequest for the inlet air, the tank outlet air, and the motor coolingair. Essential for removing micro-dust.

CA30 ON.60/100

These are single-phase suction units with turbine, essentialfor continuous cleaning operations involving dust, flours,chips of every type and liquids of varying densities. You canchoose the 60- or 100-litre version.The vertical form allows these suction units to be used even inreduced spaces where a powerful, continuous suction isrequired. They are also extremely easy to move.The turbine with silencer guarantees a good acoustic level.Upon request, filters in class M, H, antistatic, heatproof, and amechanical/electronic float can be assembled.



THREE-PHASE Industrial Vacuum Cleaners

CA30 S/CA30 SS CA40 ON.60/100 CA40 ON Atex22

400

CA30 S/SS

Three-phase industrial vacuum cleaners that are powerful yeteasy to move, for applications requiring frequent movementsin reduced spaces. They are fitted with a three-phase co-axialturbine in die-cast aluminium. Reliable, and designed forcontinuous heavy-duty use, they are recommended for carwashes and the ceramic, chemical, mechanical and textilesectors. They are ideal for removing dust, flours, chips and liquidsof varying densities. The SS version is fitted with a radial filter asstandard, and is referred to as a vacuum cleaner for dusts, while theS version can work on both dusts and liquids.Upon request, class M and heatproof filters can be assembledon both models.

CA40 ON.60/100

These are three-phase vacuum cleaners with a sturdy frame;thanks to the good depression values and air flow rates,they can be used for a multitude of applications.By adding the radial filter of 19,500cm2, the cyclonic cone andthe tangential nozzle, they can work on dusts and/or liquids witha high power level guaranteed by the positioning of the turbinein direct contact with the filtering system.They are highly reliable and have been designed for continuousheave-duty use: they are recommended for the agroindustrial,ceramic, chemical, mechanical and textile sectors. Their verticalform allows them to be easily moved, even in reduced spaces.You can choose the 60- or 100-litre version with trolley tanks.

CA40 ON Atex22

This is a certified vacuum cleaner for use in areas where themaximum operating safety is required. It has been designedto work on dust with a potentially low explosion risk(Potentially explosive areas classified as Zone 22).They can therefore be used for cleaning ovens, in thechemical/pharmaceutical sector, in mills, etc.



THREE-PHASE Industrial Vacuum Cleaners

CA T60 TSP CA100T/150T/SEACA40/75/75S - CA40/75/75S SEA

CA40/75/75 S/SEA

These are very powerful three-phase vacuum cleaners withthe turbine installed in a rear compartment. Theirconsiderable size does not facilitate movements so they arebest suited to environments where they can be used in afixed position. They have been designed with a particularlysturdy frame that makes them remarkably solid. The materialsucked in by the cyclonic effect tends to deposit on the floor ofthe container, while the finer dust particles contained in themixture settle on the filtering surface that captures them.Despite having the same power characteristics, CA75 and CA75S are targeted at different types of use; in particular, modelCA75 favours the air flow so accessories with a large diametercan be used on it, while model CA75 S has a notabledepression so it is ideal for especially heavy-duty residues.

The SEA versions have the same performance levels and thesame characteristics as the normal models, but they are fittedwith an especially attentive filter cleaning system.The versions with automatic electric shaker (SEA) have 2working modes:automatic modeAfter every 20 minutes of uninterrupted operation, the devicestops automatically and a 20-second cleaning cycle begins.When the cycle has ended, the device will restart automatically.Or:manual modeWith the turbine operating, press the shaker button to interruptturbine operation and begin a 20-second filter cleaning cycle.When the cycle has ended, the turbine will restart automatically.

CA T60 TSP

This is a vacuum cleaner designed for use on largequantities of very fine dust (e.g. cement) that tends to clogthe filters in a short time.The presence of a cartridge filter and a pneumatic shakerguarantees excellent working autonomy.

CA100 T/150 T SEA

These are vacuum cleaners used for applications requiringtop performance levels on large quantities of material andresidue.The considerable dimensions mean that these units should beused in a fixed position, or at least with very limited movements.7 filtering cartridges guarantee an overall suction surface of85,000cm2, while the vibrating shaker system ensures the filteris fully cleaned.The tangential nozzle, with its large diameter (120mm), createsthe ideal conditions for working with the separate dust collector(separator). In this way, it is possible to take in large quantitiesof dirt while notably increasing the work productivity and halvingthe work time

Vacuum gaugeVacuum gauge



Manual shaker Cyclone cone Tangentialinletnozzle

Releasabletrolleytank

Wide-surfaceradial filter

The vacuum cleaners are supplied as standard with a reduction of Ø 70-50

* apart from model CA 30S - ** apart from models CA1.25, CA 30S, CA T60 TSP*** apart from models CA1.25, CA 30S, CA 30SS, CA40 ON/Atex22 - **** apart from models CA 30S, CA 30SS only releasable

Mechanicalfloat

The plus factors that characterise the Comac industrialvacuum cleaners

Standard accessories available upon request

All the models are fitted with:

• A manual, electric or pneumatic shaker*The shaker is important to facilitate the cleaning of thefiltering apparatus without opening the vacuum cleaner.Apart from the models fitted with a manual shaker, thereare also those with an electric one (SE version) andothers with an automatic electric shaker (SEA version).With this function, by setting the shaker cleaning inautomatic mode the vacuum cleaner carries out theoperation autonomously, so there is no need tocontinuously check the operation.

• Cyclone cone**This is fundamental for reducing the work time, allowingyou to pass from the suction of liquids to that of solids,or both types simultaneously (e.g. when removingmachining residues where liquid refrigerants are alsopresent).

• Tangential inlet nozzle***This improves suction quality and the lifespan of thefilter, extending its working life and safeguarding it fromboth damage and obstruction.

• Releasable trolley tank****Its ergonomics and easy-to-use form facilitate themoving and emptying of the recovery tank.

• Wide-surface radial filter*The use of wide-surface radial filters, combined with theeffectiveness of the shaker system, reduces workinterruptions; this means the operator's productivity levelis increased. For certain vacuum cleaner models, thefilters can also be supplied in M, antistatic, heatproof andHEPA versions upon request.

• Mechanical floatAvailable upon request, as an optional; easy to install.Characterised by its ease of use when removing liquids,and also ensures the maximum reliability and safety forthe operator, interrupting suction at the highestpermitted level and therefore safeguarding the suctionmotor.

The Comac vacuum cleaners are produced as standard withpainted tanks (apart from models CA1.25, CA1.30, CA2.30,CA1.50, CA2.50, CA30 S, CA30 SS, CA40 ON Atex22), buta stainless steel version is available upon request.

05Ø TIK ARTXE05Ø TIK DRADNATS04Ø TIK ARTXE04Ø TIK DRADNATS

ANTISTATIC KIT Ø40 ANTISTATIC KIT Ø50 STANDARD KIT FOR OVENS Ø40 EXTRA KIT FOR OVENS Ø40



CONTACT ALL BRANCHES

Tel: 1300 347 347Fax: 1300 348 348www.centralcleaning.com.auEmail: [email protected]

VICTORIA - NEW SOUTH WALES - TASMANIASOUTH AUSTRALIA - QUEENSLAND - WESTERN AUSTRALIA

400230-240

CA1

.30

••••••••

1-2

1,3

25

212

301,370x4

CA1

.25

••••••••

1-2

1,3

25

212

250,750x4

CA2

.30

••••••••

2-2

2,7

25

425

301,370x4

CA1

.50

••••••••

1-2

1,3

25

212

501,370x4

CA2

.50

••••••••

2-2

2,7

25

425

501,370x4

CA2

.40

••••••••

2-2

2,2

22

389

401,9570x4

CA3

.40

••••••••

3-2

3,3

22

583

401,9570x4

CA2

.60

••••••••

2-2

2,2

22

389

601,9570x4

CA3

.60

••••••••

3-2

3,3

22

583

601,9570x4

CA3

.100

••••••••

3-2

3,3

22

583

1001,9570x4

CA2

.60

SE

••••••••

2-2

2,2

22

389

601,9570x4

CA3

.100

SE

••••••••

3-2

3,3

22

583

1001,9570x4

CA2

.60

SEA

••••••••

2-2

2,2

22

389

601,9570x4

CA3

.100

SEA

••••••••

3-2

3,3

22

583

1001,9570x4

CA3

0 O

N.6

0

••••••••

-11

2,2

30

300

601,9570x4

CA3

0 O

N.1

00

••••••••

-11

2,2

30

300

1001,9570x4

CA3

0 S

••••••••

-11

2,9

32

350

800,4370x4

CA3

0 SS

••••••••

-11

2,9

32

350

500,770x4

CA4

0 O

N.6

0

••••••••

-11

2,9

32

350

601,9570x4

CA4

0 O

N.1

00

••••••••

-11

2,9

32

350

1001,9570x4

CA4

0 O

N A

tex2

2

••••••--

-11

2,9

32

350

1001,9570x4

CA4

0/75

/75S

••••••••

-1122

2,95,55,53232423505703601001,9570x4

CA40

/75/

75S

SEA

••••••••

-1122

2,95,55,53232423505703601001,9570x4

CAT

60 T

SP

••••••--

-11

2,9

32

350

601,9570x4

CA1

00T

SEA

*******-

-22

8

42

720

1708,5120x4

CA1

50T

SEA

*******-

-2

11

32

1140

1708,5120x4

CA1.25

CA1.30CA2.30CA1.50CA2.50

CA2.40CA3.40

CA2.60CA3.60CA3.100

CA2.60 SECA3.100 SE

CA2.60 SEACA3.100 SEA

CA30 ON.60CA30 ON.100

CA30 S

CA30 SS

CA40 ON.60CA40 ON.100

CA40 ON Atex22

CA40CA75CA75 S

CA40 SEACA75 SEACA75S SEA

CAT60 TSP

CA100 T SEACA150 T SEA

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

-

-

-

•

•

•

•

•

-

•

-

•

•

-

-

21

31333537

6062

808286

98108

98108

96103

85

87

96103

103

125145150

125145150

105

440460

510x1080x510

660x1220x620660x1220x620660x1360x620660x1360x620

830x1220x590830x1220x590

920x1400x660920x1400x660660x1590x660

920x1270x660920x1460x660

920x1270x660920x1460x660

920x1530x660920x1720x660

1200x1010x610

1200x1330x610

920x1530x660920x1720x660

920x1720x660

1240x1610x6601240x1610x6601240x1610x660

1240x1490x6601240x1490x6601240x1490x660

1240x1610x660

1710x2390x9001710x2390x900

-

•

•

•

•

•

•

-

•

•

•

•

•

-

•

KITS TO BE USED UPON REQUEST

Standard Ø40 mmExtra Ø40 mmStandard Ø50 mmExtra Ø50 mmAntistatic Ø40 mmAntistatic Ø50 mmStandard kit for ovens** Ø40 mmExtra kit for ovens** Ø40 mm

KEY WORDS:• Kits upon request* Can be used with side branch120/50/50** With heatproof filters

TECHNICAL CHARACTERISTICS

DC motors (qty) -Turbines (qty) -Stages (qty) -

Power KW

Suction vacuum kPa

Air flow m3/h

Drum capacity lFiltering surface m2

Ø suction mouth mmIP protection rating

SRENAELC MUUCAV ESAHP-EERHTSRENAELC MUUCAV ESAHP-ELGNISSI

NG

LE-P

HA

SE V

ACU

UM

CLE

AN

ERS

THR

EE-P

HA

SE V

ACU

UM

CLE

AN

ERS

Polyesterradial

Polyesterradial

Polyesterradial

Polyesterradial

Polyesterradial

Polyesterradial

Polyesterradial

Polyester

Polyesterradial

Polyesterradial

Antistaticradial

Polyesterradial

Polyesterradial

Cartridge

Cartridges

Stainless steel

Stainless steel

Painted

Painted

Painted

Painted

Painted

Stainless steel

Stainless steel

Painted

Stainless steel

Painted

Painted

Painted

Painted

Manual

Manual

Manual

Manual

Electric

ElectricAutomatic

Manual

-

Manual

Manual

Manual

Manual

Electric/Automatic

Pneumatic

Mechanicalvibrating

Class M,Antistatic,Heatproof

Class M,Antistatic,Heatproof

Class M, H,Antistatic,Heatproof





Class M,Heatproof

Class M,Heatproof


-



Antistatic

-

Dust Liquids Tankmaterial

Cyclonicsystem

Shaker Standardfilters

Filterson request

Machineweight kg

Machinedimensions mm

L x H x W

Machinefor industrialuse

KEY WORDS

E - Mains-poweredmachine withvoltage value

The machines are manufactured in compliance with the Directives 2006/42/EC, 2006/95/EC, 2004/108/EC and the harmonised standards IEC 60335 part 1 and part 2. The steel parts are subject to treatment which guarantees a long life and makes the parts oxidation-proof.

Industrial vacuum cleaners powerful, versatile and easy … operations as well, ... The presence of...

Documents

Transcript of Industrial vacuum cleaners powerful, versatile and easy … operations as well, ... The presence of...