iKON AVS Product Catalogue
-
Upload
ikon-avs-ltd -
Category
Documents
-
view
255 -
download
1
description
Transcript of iKON AVS Product Catalogue
For well over a decade iKON AVS have been at the forefront of creating innovative audio visual and control solutions.
A selection of key benefits:
Innovative AV control and connectivity products
UK design and manufacture to highest standards for reliability
Pre- sales & technical support
Products fit standard UK socket boxes
Knowledgeable and friendly staff
Many products are available as cost effective bundled solutions
iKON engineers have over 100 years combined experience in the design and installation of audio and AV systems and
we are here to provide you with specialist help and advice.
Reliability through Quality and Simplicity
“Reliability through quality and simplicity” is our design principle:
only components of the highest quality are used throughout, design
is kept as simple as possible to increase reliability and reduce costs.
All iKON AVS products carry athree year RTB warranty, selectedranges carry a lifetime warranty.
Simple projector controllers.....Page 2 Simple control amplifier.....Page 3
Integrated contol system.....Page 4 Synergy controllers.....Page 5
Audio controller.....Page 6 Audio routing system.....Page 7
Amplifiers.....Page 8
Dado panels.....Page 9 Euro panels.....Page 10 Euro frames.....Page 11
Desk access.....12 Floor panels.....Page 13
Podule control system.....Page 14 Modular solutions.....Page 16
Critical system audio distribution.....Page 16 Adapters.....Page 16
PRO SolutionsConnectivity
Controllers Audio
SPCSimple projector controllers
The iKON AVS SPC series are cost effective, entry-level control interfaces
for display devices, including LCD and DLP Projectors as well as LCD and
Plasma displays.
All SPC controllers feature an orange backlit power button with two or three
green backlit input select buttons and a blue backlit picture blank button. On
the SPC 6 and 7 two additional backlit buttons are provided for volume raise
and lower.
The controllers feature a bi-directional RS-232 interface for control of the display
and two open collector outputs for the control of an electric screen via a SPC-PP1
or external relays. An input is provided for room occupancy detection, panel lockout
or remote system shutdown.
To program the unit it is only necessary to download a library module for complete
control over the display, although full control over input selection, warm up and cool
down times is provided. The installer can also set up a four-button sequence to lock
and unlock the panel's operation.
The SPC series are fabricated on a 50 mm Euro module allowing their use in a
wide range of wall panels in UK, European and NZ formats. This format also
allows the easy combining of control and input panels as well as use in the Ikon
range of desk modules.
Supplied complete with a UK white mounting frame.
2 For more details go to www.ikonavs.com/SPC
SC-AMPSimple Control Amplifier
The Simple Control Amplifier (SC-AMP) is the ideal audio video solution for small and
medium size rooms.
Cost effective and offering energy saving opportunities, it is also easy to specify and
simple to install.
The SC-AMP is a combined entry-level projector or display controller, a 20 watt stereo
amplifier and convenient laptop connection or laptop and USB connection. All on a
two-gang white metal panel that fits a standard 35mm UK back box.
Although it can be easily programmed, the SC-AMP can be supplied pre-programmed
for your choice of display.
Featuring automatic shut-down to save power and panel lock-out to prevent
unauthorised use, the amplifier can also be used on its own when the projector isn’t
required. Simply plug an audio source into the 3.5mm jack on the front and it will
automatically turn on the amplifier.
The internal stereo amplifier is an 86% efficient class D design with a RMS output of
10 watts per channel into 8 Ohms. It is fitted with screw terminals for power, speakers
and inputs on the rear for permanent connections and a 3.5mm stereo jack on the
front panel.
For more details go to www.ikonavs.com/SC-AMP 3
iCS-10Integrated control system
The iCS-10 incorporates a fully configurable control system along
with routers to handle XVGA, Component video, Composite video
and ten channels of audio. There is also a microphone input as
well as both front and rear expansion slots.
The iCS-10 provides:
4 into 1+1 XVGA & Component video switch
4 into 1+1 Composite video switch
10 into 1 stereo audio switch with a master volume control and balanced outputs
Microphone input with both local and remote mute
x Bi-directional RS232 serial ports
Motorised screen, projector lift and power control
Room occupancy support
Projector control
PodNet to communicate with other Ikon Podules
2
Designed for the installation market, the iCS-10 offers a versatile combination of facilities
and control options allowing its use as a stand alone switch / controller or use it with Octo,
Wall or Touch Podules. It can also be controlled by third party panels using one RS232
port whilst retaining the display control function via the second RS232 port.
The iCS-10 features bi-directional RS232 interfaces for control over the display and other
peripheral equipment, therefore it allows handshaking to ensure synchronisation of the
devices.
The two open collector outputs can be used for the control of electric screens, projector lifts
or projector power, whilst two contact inputs are provided for room occupancy shutdown,
volume control or remote system shutdown.
4 For more details go to www.ikonavs.com/iCS-10
SynergySynergy range of controllers
Extensive onboard facilities, quick and easy programming and simplicity
of expansion and linking, are key benefits of this innovative range of
controllers.
A bi-directional RS232 port provides control over displays and other RS232
devices whilst IR ports supporting either single or dual emitters are provided
for control of amplifiers, lighting and video players. RS232 and IR commands
can be loaded from embedded libraries or user created files.
Two outputs provide control of external relays and indicators and these can
use the built-in screen, protector lift and power control routines, or they
can be configured to operate other devices. Inputs are available for use
with external buttons; either operating in parallel with the panel or as extra
buttons. They can also be used for room occupancy detection with a PIR,
or used to remotely shut the system down.
The Syn-Link port provides linking of panels in multi-room systems,
connection to Synergy peripherals or RS232 port to control other
equipment. Using the Syn-Link port, panels can be linked as either
Master / Slave, Slave / Master or Dual Master configurations with
no software overheads or additional programming. This port is also
used to connect the AU4 series of audio controllers, again with simple
tick box programming. The Syn-Link port can also be used to connect
the Synergy panel to a PC enabling two way control.
Synergy panels all fit a standard depth UK back box and are provided with
detachable screw terminals for ease of installation.
For more details go to www.ikonavs.com/synergy 5
AU4Audio controller
The AU4 is a serial controlled four input audio switcher and volume control. It also provides
a microphone input, which is mixed with the program audio.
The AU4 audio controller is available in two versions:
AU4L
AU4P
provides line level outputs on RCA sockets.
as the AU4L but also incorporates a 20 watt per channel amplifier.
The microphone input has switchable phantom power and a selectable hi-pass filter.
It also has its own level control and EQ. The microphone is mixed with the program
audio after the remote volume facility and the microphone can be turned on and off
either remotely via the Synergy panel, or using a push button connected to terminals
on the audio controller.
When an input is selected the volume can be adjusted with any change stored against the
input. Dip switches on the rear of the unit allow either full range (+15 to –48dB ) or limited
range (+15dB to –15dB), The default level can also be set as fixed (0dB), or retaining the
last setting.
The AU4 is designed to operate in conjunction with either the Synergy or SPC controllers
but can also be used as a stand-alone RS232 controlled audio system.
6 For more details go to www.ikonavs.com/AU4
Matrix 2Audio routing system
Use as the heart of a distributed audio system, as the router for a multi room system or
as part of a complex boardroom system, the iKON Matrix 2 Podule offers an easily
controlled and configured central stereo audio processor with individual level control
of each output. It is also ideally suited for multiroom audio and headphone distribution
system when used with the remote panels.
Inputs are unbalanced via 3.5 mm stereo jacks; whilst all the outputs are balanced
and share individual RJ45 sockets with control and DC power, allowing a single
Cat5 cable between the Matrix 2 and its remote outlets and control panels.
M2-C M2-HC M2-BM M2-US50mm Euromodule providing
remote control and indication
of the Matrix 2 input and
volume. It is fitted with rear
panel balanced audio outputs
on screw terminals
Contains a local headphone
amplifier with remote control
of the Matrix 2 for input
source and volume all on a
50 mm Euro module
A series of mono, stereo,
balanced and unbalanced
audio Euromodule audio
panels are also available
for terminating to external
amplifiers
The current output assignments are shown on the front panel LCD and the Matrix 2 also
incorporates multiple selectable operating configurations, volume range setting and online
level trimming expanding its abilities beyond simple audio switching. The Matrix 2 can also
be controlled via RS-232 or connected via PodNet using a single Cat5 cable to allow remote
selection of input sources and volume control from individual rooms or centrally from our
Wall, Euro and Touch Podules.
For more details go to www.ikonavs.com/Matrix2Pod 7
M2-US
SGA-40 & DPA-40Amplifiers
The SGA-40 and DPA-40 are the ideal audio video solution for small and medium
size rooms, offering cost effective and energy saving opportunities, they are easy
to specify and simple to install.
Both amplifiers are 20 watt per channel stereo wall and dado mounting. They are
ideal for multi-room audio, classroom, hotel bedroom and small meeting room
applications. They use an 86% efficient class D design and have a RMS output of
20 watts per channel into 8 Ohms when powered from an 15V power supply or 10
watts when powered by the included 12V power supply, and as most quality
loudspeakers are 8 Ohms, maximum efficiency is assured. Additionally the
amplifiers adopt an ultra low power standby state when no signal is present.
The SGA-40 is manufactured in the 50mm euro format and supplied complete with
a UK size white mounting frame. Alternative frames are available in a wide range
of finishes from iKON AVS as well as other reputable switch plate manufacturers.
The SGA-40 fits a standard UK single back box and requires only a 35mm depth.
It will also fit the single DIN back box. It is fitted with two rear inputs on screw
terminals for permanent connections and two 3.5mm stereo jacks on the front
panel for other sources.
The DPA-40 is manufactured on a twin gang steel plate where ultimate durability is
required. The DPA-40 fits a UK back box and requires only a 35mm depth. It is fitted
with screw terminals for speakers and inputs on the rear and a 3.5mm stereo jack on
the front panel for other sources. Additionally the amplifier has remote shutdown ability
adopting an ultra low power standby state.
8 For more details go to www.ikonavs.com/Amplifiers
Designed for use in Dado trunking or standard UK back boxes, this range of pre-engraved
panels is available with a wide variety of panel and internal connector configurations. The
panels utilise high quality Crabtree blanks and are machined on the back to recess the
connectors, achieving both the required mounting depth as well as greatly enhancing
the panels strength
Selection of singlegang plates
DADO-1G
DADO-1G-J
DADO-1G-P
DADO-1G-PC
DADO-USB
DADO-1G-AB
DADO-1G-STA
1 buffered
15 p
in
D
15 p
in
D
L+R
Phono
L+R
Phono
Video
Phono
Video
Phono
3.5m
m
jack
3.5m
m
jack
USB
USB
Plastic
Plastic
Stainless
Stee
Stainless
Stee
Selection of twingang plates
DADO-2G-P
DADO-2G-J
DADO-2G-PC
DADO-2G-USB
DADO-2G-AB
DADO-WB-BU
2+1 buffered
2+1 buffered
Our confidence in the quality
of our Dado Panels extends
to a lifetime warranty* against
breakage, this is in addition
to our usual 3 year warranty.
Can't see what you
want, see our web pages
for more options, or
contact us for our
custom plate service.
#Terms and conditions apply
For more options go to www.ikonavs.com/DADOplate 9
Dado PanelsConnection panels
white steel only
1
1
1
1
1 1
1
1
1
1
1 1
1
1
1
1
1
1 1
1
1
2
2
1
1
1
1
1
1
1
1
1
Euro PanelsConnection panels
A selection of 25mm panels 15
pin
D
15 p
in
D
L+R
Phono
L+R
Phono
Video
Phono
Video
Phono
Compo
nent
video
3 Pho
nos
Compo
nent
video
3 Pho
nos
3.5m
m
jack
3.5m
m
jack
USB
GC-F
F4m
m
spea
ker
Coa
x
aeria
lF'ty
pe
coax
S-video
HDM
I
DVI
Display
Port XLR
EP-A25EP-V25EP-CP25EP-PC25EP-GC25EP-USB25EP-SV25EP-JK25EP-SPK25EP-CA25EP-CS25EP-AB25
A selection of 50mmpanels
EP-PC50EP-PC50VEP-PC50JEP-DVI50-STEP-AB50-STEP-XLR50EP-HDMI50EP-HDMI50-90-AVEP-HDMI50-90-VVEP-HDMI50-90-CVEP-DPJEP-DPA
2 buffered
buffered
1
11 1
1
1
11
11
1
1
111
11 1
11
111111
1
1 111
11
Can't see what you
want, see our web pages
for more options, or
contact us for our custom
plate service.
10 For more details and options go to www.ikonavs.com/EuroPlates
A versatile range of Audio Visual 'snap in' modules to fit the 50mm Euro frame format.
Ideal for all installation requirements where a mix of connectivity is required.
Euro FramesConnection Panels
EP-12-GB
2 x 150mm aperture
Back box depth = 47mm
Overall size 164mm x 196mm
EP-400GW
2 x 200mm aperture
Back box depth = 45mm
Overall size 250mm x 215mm
EP-200GW
1 x 200mm aperture
Back box depth = 45mm
Overall size 250mm x 85mmEP-12-GW
2 x 150mm aperture
Back box depth = 47mm
Overall size 164mm x 196mm
Can't see what you
want, see our web
pages for more
options or contact
us for our custom
service.
White plastic Satin brushed stainless steel
EP-100FW
EP-50FW
EP-100FSB
EP-50FSBBlack plastic
EP-50FB
EP-100FB
Satin brushed brass
EP-100FBB
EP-50FBB
Chrome plated cast alloy Satin chrome
EP-100FC
EP-50FC
EP-100FSC
EP-50FSC
To see complete range go to www.ikonavs.com/EuroFramesMain 11
Desk AccessConnection panels
For use with the iKON AVS Euro Panels, Euro Podules, SPC controllers and SGA-40
amplifiers, this range of desk access modules enables their use in or on desks and cabinets.
RDM-6HFlip top horizontal Desk Access Module supplied in a black and silver finish. Constructed
from an aluminium extrusion it has 150mm of available space for 6 x 25mm or 3 x 50mm
Euro Panels. Select your requirements from our extensive range of Euro Panels to suit
your application. It is supplied complete with a 13A socket* and a fixed 2m mains cable.
For mounting only a 324mm x 133mm cut out is required.
RDM-6VSlide out vertical tower that has 150mm of available space for 6 x 25mm or 3 x 50mm
Euro Panels. Select your requirements from our extensive range of Euro Panels to suit
your application. Constructed from an aluminium extrusion with a moulded top cover,
it is supplied complete with a 13A socket* and a fixed 2m mains cable. For mounting,
only a single 80mm diameter hole is required. Overall diameter is 104mm and the
RDM-6V extends 215mm above the desk. It is rated to IP54 when closed
SDM-6HDesk mounting horizontal module with 150mm of available space for 6 x 25mm or
3 x 50mm Euro Panels. Select your requirements from our extensive range of Euro
Panels to suit your application. Constructed from an aluminium extrusion with moulded
end covers, it is supplied complete with a 13A socket* and a fixed 2m mains cable. It is
only 110mm deep, 88 mm high and 364mm wide. Wider versions are available to order.
* Schuko, CEE7 and IEC alternatives available to order
12 For more details go to www.ikonavs.com/DeskModuleMain
Floor Box PanelsConnection panels
Quick and easy to install floor box panels in both flat and
angled versions and designed to fit most Crabtree, Britmac,
Powerplan and MK floor boxes. Other sizes are available.
The AFB range has been designed with a recess to make
connecting easier and have a flush finish when installed. The
PC versions all have screw terminals for both VGA and Audio
to eliminate the need for soldered connections on site whilst
the HDMi, Displayport and DVI versions utilise angled back
to back connections for use with pre-made cables.
The FBP range is designed to take our standard 25mm and
50mm Euro modules. Custom panel sizes are available on
a short lead time.
Size
101 x 17587 x 17375 x 17566 x 173AFB-66-P1
AFB-75-P1AFB-87-P1AFB-100-P1
Aperture Panel sizeEP-FBP50EP-FBP100
50mm100mm
175 x175mm
For more details go to www.ikonavs.com/FloorboxMain 13
Whilst hard to believe, not all system requirements can be met from
out standard range of products. For the more demanding and unusual
requirements we have a range of control and interface products
specifically engineered for these situations.
Our Pro Solutions range includes:-
ControllersBased upon our Podule system, specialised controllers are available
for use individually or networked together to create diverse control
applications. These are also suitable for mission critical systems
where status feedback and redundancy are required.
Installation AccessoriesThe little problem solvers that often make the difference in delivering
the system your client wants. From a range of din rail mounting audio
and interface adapters through to connection adapters for use in
custom panels, the iKON Pro range contains many useful devices all
designed to make the installer life easier.
PAVA and Fault MonitoringSpecialised products for the distribution and monitoring of critical path
audio using dual redundant fibre-optic or Cat5 networks.
For the complete iKON Pro range vist out specialised website at
www.ikonavs.com/ikonpro
14 For more details go to www.ikonavs.com/Podules
Octo
Euro 8
Wall 15
Wall 16
PNP 8
CIR-R
Chrono
XVGA
Relay 2
Bi-directionalRS232 port Buttons LED's
Infra-redoutputs
InputsOpen
collectoroutputs
8 bi-colourgreen/yellow
8green
10green
16green
8green
Other
user can label buttons
user can label buttons
A range of pre-engravedbuttons are available
A range of pre-engravedbuttons are available
user can label buttons,PodNet only
inputs analog capable+ 2 analog outputs
24 hour, 365 day event timer
4 x 1:2 XVGA and stereo audio switcher
4 inputs analog capable+ 4 x 240v relays
1
2
1
2
1
1
1
1
8
8
15
16
8
2
2
2
2
4+blaster
2
2
2
8
1
8
2
2
2
8
4
PodulesPodule controllers
A range of innovative control interfaces providing easily programmed control for
dedicated applications. Each Podule can be used as a separate intelligent controller
or as part of a more complex system, formed by connecting several Podules together
with low cost CAT5 cabling.
As each Podule is “intelligent” a system can start with a single Podule and then extra units
can be added to create a system using this distributed processing to create diverse control
applications making the Podule ideal for mission critical systems.
Systems can be installer programmed using the supplied software or, using our low-cost
programming service, they can be shipped pre-programmed for your application.
PodulesPodule controllers
Euro 8
Octo
PNP-8
Relay 2
Wall 16
Chrono
Wall 15
XVGA CIR-R
For more details go to www.ikonavs.com/Podules 15
PRO SolutionsModules, adapters, audio
iKONS range of Din-Rail interfaces cover both audio, video and control options
all engineered for quality, reliability and ease on integration.
Just a small selection are shown here, please refer to the website for the complete
range along with technical specifications and application diagrams.
1 into 2 RS232 active splitter
BiDirectional RS232 to RS485 converter
Four SPCO relays with screw terminals
2 x line level audio isolating and balancing
transformers
8 x RS232 controlled open collector outputs.
Ideal for use with the DM-Relay
Twin Hi-Quality microphone pre-amplifier with
phantom power and adjustable gain
Dual balanced line level audio mixing and
distribution amplifier
Unbalanced to balanced line sending amplifier
Four channel, four output CVBS distribution amplifier
DM-232
DM-485
DM-Relay
DM-Balance
DM-Serial
DM-MIC
DM-MIX
DM-Line
DM-VDA4
The iKON AVS DAI mk4 is a fibre-optic audio distribution system for critical systems. It uses dual, continuously monitored redundant fibre rings. If a fault is discovered the signal
path is automatically rerouted through the remaining operation fibres. Inputs and outputs are balanced line level. The control port supports selective paging and channel routing as
well as allowing the connection of a single RS232/RS422/RS485 data channel with a maximum baud rate of 38,400 carried transparently over the same network as the audio.
16 For more options and details go to www.ikonavs.com/ikonpro
No one offers a more comprehensive range of high quality, British made
adapters than iKON AVS. With options covering most analogue and
digital signals, both passive and active formats are available.
A selection of our
adapters
Main
connector
Secondary
connectorComment
DADO-90P
FBA-1
DADO-ST
DADO-STA
HDMI-BB
HDMI-90BB
HDMI-ST
DVI-ST
USB-ST
RJ45-ST
X3-ST
HD15-90
D9-90
SAB-BNC
DAB-BNC
DAB-15D
DAB-ST
AB-25
15 pin D
15 pin D
15 pin D
15 pin D + 3.5 Jack
HDMI
HDMI
HDMI
DVI
USB
RJ45
XLR
15 pin D
9 pin D
15 pin D
15 pin D x 2
15 pin D x 2
15 Pin D x 2
L+R phono
15 pin D
5 BNC
ST
ST
HDMI
HDMI
ST
ST
ST
ST
ST
15 pin D
9 pin D
5 BNC
5 BNC
15 pin D
ST
ST
90 deg
in-line
90 deg
90 deg
90 deg
active buffer
2 x active buffer
2 x active buffer
active buffer
active balanced
ST = Screw terminal
UK Manufacturer
Advice and Technical Services
Stock Items & Delivery
Extensive warranties
CE conformity
Energy Saving
Technical SupportCommitted to providing the very best support IKON AVS can be contacted on
+44 (0)1299 250991
e-mail [email protected]
web www.ikonavs.com
IKON AVS is an electronic engineering and manufacturing company based near Kidderminster in the heart of England. Our
products are available direct or through distributors and dealers throughout the world. For dealer and OEM enquiries please
contact us directly at sales@ ikonavs.com
Getting it right for our customer and the end user is paramount. We provide help in the form of advice in specifying systems
all the way to application diagrams. What's more our highly qualified engineers are available to speak to you direct.
Standard products are available from stock here in the UK making delivery fast and efficient. Non-stock items and custom
variants are available.
Our ethos is 'Reliability Through Quality and Simplicity' therefore we aim to make the need for warranty unnecessary however
for your peace of mind extensive warranties are included with our products. All iKON AVS products are backed by a3-year
parts and labour warranty. With selected products carry a lifetime warranty against breakage.
For your peace of mind all our products carry the CE mark. This ensures that products meet the essential requirements of
all relevant EU directives for electrical safety, emissions and immunity to external interference.
Most products have energy saving features such as automatic shutdown and links to PIR sensors.
iKON AVS Ltd,
Unit 238, Ikon Trading Estate,
Droitwich Rd, Hartlebury,
Worcestershire, DY10 4EU
United Kingdom.
Tel: +44 (0) 1299 250991 Fax: +44 (0) 1299 250983email: [email protected] web: www.ikonavs.com