• Independent 8086 and 8089 CPUs may be added :9111 IIi EleEtraniEs [arp. • I 6-bit microprocessor • High-speed multi-CPU I" '\ • 8086 main CPU + 8087 (optionat) ?" I~ ~ • 8089 IIO CPU • One 5-inch Winchester disk (7.8 M byte) drive

SU RADAP IV I AGIIV

, ,

;l~ ®

large vollHigh performance,place _______u~ attheto~

:9111 IIi Elel:tranil:s

14·inch, Color Display Unit be a multi·user, multi·task, high performance The ai·M16 microcomputer was developed to

VDU-140!CG is a high performance intelligent terminal having capability for character overlay display, jull microcomputer with multi·processor configu· graphics, and full-screen scrolling features. The high

ration placing it in a class far above conven· resolution 14-inch, B-color, 640 dot X 400 dot display tional microcomputer systems. uses an B-bit CPU (BOBB) and CRT control [SIs.

I

, ....

' 7 e Q ­1- \ \ ' ~ '/ ... '" <> • I , \ 2 \ -~ ' aYl

f, '/ I

I

' ~

' - ' ~ _ 0 _ - , \

'--~-Numeric Pad and 16 Function Keys 5·inch Winchester Disk Drtvf~__---------I

The ai-M16 keyboard contains 16 junction keys, a The memory is a 5-inch Winchester disk drive with numeric pad, a CRT control key, and may be obtained 7.BM byte/ drive, and up to 3 drives can be added with JIS, ASCII, Swedish, German, or other catego­ as expansion options. A large-scale system with ries. 40M and BOM byte capacity can be configured.

Data transfer speed is 5M bits/ second and there are 960 tracks.

Ime, high speed 10-bit GPU of business machines

a-inch Double-Density Thin Floppy Disk Memory capacity is 1.1M bytes/drive, and up to 3 drives can be added as expansion options to the standard 8-inch double sided double-density disk. IBMformatfile conver­sion is possible. Data transfer speed is 500K bit/second. There are 154 tracks per drive and 15 sectors per track.

4 Board structure provides MCP, PRAM, PFDC and PWDC. Each CPU (8086,8087,8089) has 16K byte ROM, 512K byte RAM (with 2 parity bits), 6 serial input/ output ports, parallel input/ output port, battery backup for calendar clock, lO-channel timer count­er clock, and interrupt request has a minimum of 15 channels. The 4-board structure provides MCP, PRAM, PFDC and PWDC.

SUPER 16-81T ai-M16 FEATURES 1. 16-bit microprocessor 2. High-performance, high-speed multi-CPU 3. SOS6 main CPU (SMHz, SMHz) 4. SOS9 I/ O CPU (SMHz, SMHZ) S. A large-scale system can be created by adding SOS6 and

SOS9 I/ O CPUs independent of the arithmetic CPU SOS7 (SMHz, SMHz).

6. Main CPU , auxiliary memory controller, multi-terminal controller, and communication controller functions are distributed.

7 . The S12K byte RAM (with 2 parity bits) and 16K byte ROM are standard equipment.

S. The maximum memory size of each CPU is S12K bytes and public memory is S12K bytes.

9. The two-bus system includes a high-speed private bus and public bus ([EEE-796) for convenience.

10. Serial I/O: 6 port RS-232-C specified for use as the interface for CRT terminal, frequency synchronized memo­ry, acoustic coupler, serial printer, X-Y plotter and digitizer.

11. Parallel I/O: Single port Centronics interface. 12. Battery backup for the calendar clock which displays

year, month, day, hour, minute and second. 13. 10-channel timer counter clock. Six channels for serial

I/O baud rate setting. 14. Interrupt request input: IS channels minimum to permit

expansion. IS. System modules are based on single function unit packaging,

to permit matched buildup depending on the user's applications.

16. All peripheral equipment is compatible for each package . 17. Modules inside the mainframe have 10 slots. In the basic

structure , 4 slots are used. The main modules are as follows: • Master control processor board

QM-4001-MCP • Private memor y board

QM-4020-PRAM • Private floppy disk controller

QM-4366- PFDC • Private Winchester disk controller

QM-4321- PWDC The above four boards are standard equipment in the mainframe and the following four are options: • Global memory board

QM-0020-GRAM • Stream I/ O processor board

QM-OS20-SIOP • Data communications I/ O processor board

QM-00S2-DIOP • Character I/ O processor board

QM-OOSO-CIOP IS. One S-inch Winchester disk (7.S M byte) drive is standard

equipment. (20 M byte Winchester disk is available as option.)

19. One S-inch double-density thin floppy disk (1.1 Mbytel drive is standard equipment.

20. The CRT terminal is a high-class , intelligent component type. The CRT terminal type and scale can be freely selected. The standard CRT terminals are: • 12" green character CRT • 14" green character CRT • 14" color graphics CRT

21. CP/M-S6™, MP/M-S6™ , UCSD PASCALTM N , and MS­DOSTM disk operating systems can be used. UNIXTM will also be added shortly for high level applications.

22 . FORTRAN , BASIC , COBOL, C, PASCAL , PL/l , ADA , and a language processor are available .

23. A13C-24 / 26 software currently available can be used .

. ,

-----

----- -

/ ai-M16 Mainframe

CRT FEATURES 1. These in tell igent display system s were devel ­

oped based on A i Electronics' more than 20-years of experience in computer tech­nology. • 12 " green character display unit VDU­

120 / MC • 14 " green character display unit VDU ­

140/MG • 14 " color graphics display unit VDU ­

140l CG 2 . VDU-140 / MG, VDU-140ICG have 14 · CRTs

with full graphics. Both have 640 dot (hori ­zontal) x 400 dot (vertical) high-resolution displays . Ordinary characters can be displayed with full graphics overlay or independent display can be selected . The graphics buffer RAM is 128K bytes.

3. A high-performance 8-bit CPU provides C RT control and external interface control. H igh ­speed display is made possible by using an 8088 CPU, and incorporating two high per­formance LSI chips for character and full graphics contro l .

4, C RT control memo ry is a 16 KB ROM 'and a 64 KB RAM . (OPTIO N A L 32 KB ROM VERSION)

5. Th e character display handles alphanumerics and special characters, kanji , and JIS charac ­ters by selecting the attribute code . Combined display is available.

6 . Timer counter: 5 -channel. serial 1/ 0 : 2 ports 7. CRT control board has all funclions tncm:po ­

ra led into a si ngle 4-layer board 11. The super hardware lunclions lor CRT screen

control are as follows: • Convenient character display mode LSI

fun cti ons . • Automatic cursor shift function • Programmable cursor shift func lion • Characler attr ibutes can be set • Flexible scroll func tion • 80 character x 25 line screen OU lpUI

graphics display model LSllunctions • 640 x 400 dOl monochrome or color graphic

display • H igh speed data manipu lation • B link mode or No - Blink mode selectable • Zoom ing and screen scroll are available.

ai-M16 Minimum Basic Configuration CRT DISPLAYS

VDU , 12" MDNOCHROME 14" MONOCHROME 14" COLOR

,,, - -- - --- --- , , ,I VDU

I"' VIDEO DISPLAY, 1\ , \ UNI T " ,( J ..... /f- - -~:I , _ _ _ _ , ,

- --- -- , , , ' , ' I,------- ,I, I, I, I, ,,6UNITS I ,IMAX , ,,I I I

/ --- -- ~ - ---

l I lOP

8089

[

~ :-----~~~ - - - -- ~

ROM 16KB

I I

CTC 796BUS I 5CH IF I

{H SilO 2 PORTS

I MEMORY P-BUS CON TRD L

IRAM 512KB +2 PARITY BITS

[H

IF

FDC

~C- (H SilO 4 PORTS

CALENDAR

CPU _.J8086 _

~ B087 :L ___ _ __ _ __ __ _ I

rH INTE RRUPT

~H

Y P-BUS I-f--IF

MCP

J-f- I

PRAM

C/O:::> CD w

rri P-BUS I-f- ... « IF 2:

a: "-

rH ICLOCK

~0Y CTC I I

C/O, " , , ~R~!~~~ :::> CDp i VDU , I " <DI g?I : VID EO DISPLAY ) , w: \ UNIT A--­ wI , _ __ _ _ / ,, w

L____ _ _ ____ ___ J,, -- -_ .....

(I)

:::> CD U :i,--- -- -- -- - - ---, , CD, ,, :::> 11.I

I , PR INTER I , I /, /1,..,-- --- , , ,

" /

B" 2D FD .--------- .,oi ,

ii ~ : (~:I : - ­ 0 ,I I 1 I ,I t I I I II I I I I ,,1 ~~_-_~~~-= r .. FLOPPY DISK

1.1MB L _____ __t

FD-EXT RS-2~-2TOTAL 4.6MB J, -- - -- ----: CEN TRONICS ,

, PR INT ER ~~1<! :~ ~~~_C_~ -{ Pl iO ~ PRIN TER IF SCH ~ , ... --- -~-..J PFDC/

/ S'WD

5" WINCHESTER P-BUSsn ~~~NCCHEST E R IF '--OtSK 7.0MB

l, DISK CONTROLLER r(20MBoptl PWOC

Not e: Dashed line ind icat es optional,

,, I"

/"'--_ ... "

... (~ WD EXT ': : : : TOTAL I

: :: 3 1.2MO ~--, ,, 180MB opt) , I I l )

~:~::=:=:;7'

. CP/M and MP/M· regi stered trademarks 01 Dl gll al Resea rch - UC SD PASCAL IV . registered trademark 01 the Regent s of the unl versl l yol California _UNIX: reg istered tradem ark 01 Bell Laboratories (AT.T) • MS-DOS: registered trad em ark of Microsoft

IIi Ele EtroniES [ o rp. Head Offi ce : 2-28-16, Shimo-maruko, Ota-ku, Tokyo -146, Japan. Phone : + 813-756-4111 Telex 246-6176AIELEC. International Marketing Showroom : RANDIC No.3 Shimbashi Bldg. 9F, 2- 12- 1 Shimbashi, Minato-ku, Tokyo 105, Japan Phone: 813-595- 132 1 Mt Fuj i Plant : 495 Subashiri, Oyama, Sunto-gun, Shizuoka-41O-13, Japan Phone Sunto (0550) 5-3851 Printed In Japan_ AIAJ-7 _20.83-4K_2-B3

I