Conference Record of the 2005

IEEE Iridostry Applications Conference

Fortieth IAS Annual Meeting

Volume 4

wmmzwt wmmmmmwammm

i&EMfCW iff fisie^wmtm m

w"Hpi"9w Wt> WWWSt'

wmmmmflff" ttJFHP^riffffW"v ^ll^TFff

m^ mmwmmmm mmmmml 1*

^ITr r;^.-:W ^-^:'"'-''v';:^f :';i;,;/;i.^s ; ';;.V# "v.;''""'. '" *US ^'!f 31-^* '

y l§*iSp lfcj| ^§v5'y"| '';^X|«|^#'^

a,^ ^.^»^ ^.^,^yiy»y*^y**jf* f'»;

#IEEE sY TIB/UB Hannover 89

127 616101

Volume 4

Electric Machines Committee

Session 64—Synchronous Machines and Generators

Session Chair: Edward Lin, Baldor, USA

Session Organizer: Vicki Fan, University ofHong Kong, Hong Kong

64plPrediction of the No-Load Voltage Waveform of Laminated Salient-Pole Synchronous Generators 2265

S. Keller, Ecole Polytechnique Federale de Lausanne, Switzerland

M. TuXuan, Ecole Polytechnique Federale de Lausanne, Switzerland

J.-J. Simond, Ecole Polytechnique Federale de Lausanne, Switzerland

64P2A High Speed Induction Generator Based on Power Integration Techniques 2272

Weiming Ma, NavalUniversity ofEngineering, China

Dong Wang, Naval University ofEngineering, China

Fei Xiao, Naval University ofEngineering, China

Botao Zhang, Naval University ofEngineering, China

Dezhi Liu, Naval University ofEngineering, ChinaAnHu, Naval University of Engineering, China

Lijun Fu, Naval University ofEngineering, China

64p3

Dynamic Model of a Switched Reluctance Machine for Use in a SABER based Vehicular System Simulation 2280

M. Michon, TheUniversity of Sheffield, UK

S. D. Calverley, The University of Sheffield, UK

D. J. Powell, The University of Sheffield, UK

R. E. Clark, The University ofSheffield, UK

D. Howe, The University ofSheffield, UK

64p4

Improved Energy Conversion for Doubly-Fed Wind Generators 2288

Sandy Smith, The University ofManchester, UK

Rebecca Todd, The University ofManchester, UK

Mike Barnes, TheUniversity ofManchester, UK

Peter J. Tavner, University of Durham, UK

64pS

Prediction of Flux Density and Open Circuit Voltage in Large Skewed Synchronous Machines 2296

S. Troitskaia, University ofAlberta, Canada

A. M. Knight, University ofAlberta, Canada

A. Merkhouf, GE Energy, Canada

N. Stranges, GE Consumer & Industrial, Canada

64p6

12-Pulse LCI Synchronous Drive for a 20 MW Compressor Modeling, Simulation, and Measurements 2302

J.-J. Simond,Ecole Polytechnique Federale de Lausanne, Switzerland

A. Sapin, Ecole Polytechnique Federale de Lausanne, Switzerland

M. Tu Xuan, Ecole Polytechnique Federale de Lausanne, Switzerland

R. Wetter, Ecole PolytechniqueFederale de Lausanne, Switzerland

P. Burmeister, Ecole Polytechnique Federale de Lausanne, Switzerland

64p7

Finding End WindingInductances of MVA Machines 2309

Waqas M. Arshad, ABB Corporate Research, Sweden

Heinz Lendenmann, ABB Corporate Research, Sweden

Yujing Liu, ABB Corporate Research, Sweden

Jan-OlofLamell, ABB Automation Technologies AB, Sweden

HolgerPersson, ABB Automation TechnologiesAB, Sweden

IndustrialPower ConverterCommittee

Session 65—Industrial Power Converter Products and Services

Session Chair: Leon Tolbert, University ofTennessee-Knoxville, USA

Session Organizer: Po-Tai Cheng, National Tsing Hua University, Taiwan

liii

Production & Application of Light Committee

Session 66—Novel Light Sources & ApplicationsSession Chair: P. Dupuis, Katholieke Universiteit Leuven, BelgiumSession Organizer: Georges Zissis, University Toulouse III, France

66plElectrical Modeling of an Homogeneous Dielectric BarrierDischarge (DBD) 2315

S. Bhosle, Universite Paul Sabatier, France

G. Zissis, Universite Paul Sabatier, France

J. J. Damelincourt, Universite Paul Sabatier, France

A. Capdevila, Universite Paul Sabatier, FranceK. Gupta, University ofToronto, CanadaF. P. Dawson, University ofToronto, Canada

V. F. Tarasenko, High Current Electronics Institute, Russia

66p2

Xenon Discharge Produced Plasma Radiation Source for EUV Lithography 2320

C. H. Zhang, Kumamoto University, JapanS. Katsuki, Kumamoto University, JapanH. Florta, Kumamoto University, JapanH. Imamura, Kumamoto University, JapanY. Kondo, Kumamoto University, JapanT. Namihira, Kumamoto University, Japan

H. Akiyama, Kumamoto University, Japan

66p3

Experimental Evaluation of Dimming and Frequency on the Behavior ofHID Lamps Fed with Square Waveforms 2324

E. Enriquez, CENJDET, Mexico

M. Ponce, CENTDET, Mexico

M. Cotorogea, CENTDET, Mexico

J. M. Alonso, University ofOviedo, Spam

66p4

Push-Pull Self-Oscillating Electronic Ballast for Battery Application 2330

Tiago Rossato Muraro, Santa Maria Federal University, Brazil

Rafael Cauduro Dias de Paiva, Santa Maria Federal University, Brazil

Ricardo Nederson do Prado, Santa Maria Federal University, Brazil

66p5

Investigation of Electrical Parameters in Compact Fluorescent Lamps 2335

Dilai Lu, Northwest University, PR China

Lanxiang Zhong, Northwest University, PR China

Georges Zissis, CPAT-UPS, France; Zheng-Zhou Franco-Chinese Joint Lab, PR China

Zhiguo Lu, Northwest University, PR China; Zheng-Zhou Franco-Chinese Joint Lab, PR China

66p6

Design and Development ofDigital Control Multi-lamp Back-Light Modules for TFT-LCD TV 2340

C.-C. Chen, Nan-Jeon Institute of Technology, ROCH.-S. Nien, National Chung Cheng University, ROCC.-L. Shen, Nan-Jeon Institute ofTechnology, ROCT.-F. Wu, National Chung Cheng University, ROC

Industrial Power Converter Committee

Session 67—AC/AC Conversion ApplicationsSession Chair: Geza Joos, McGill University, CanadaSession Organizer: Marco Liserre, Politecnico di Bari, Italy

67pl

A Novel Commutation Method of Matrix Converter Fed InductionMotor Drive Using RB-IGBT 2347

Daning Zhou, Tsinghua University, China

Kai Sim, Tsinghua University, ChinaLipei Huang, Tsinghua University, China

Kiyoaki Sasagawa, Fuji Electric Advanced Technology Co., Ltd., Japan

liv

67p2

A Utility Power Supply Based on a Four-Output Leg Matrix Converter 2355

D. Katsis, U.S. Army ResearchLaboratory, USAP. W. Wheeler, University ofNottingham, UK

J. C. Clare, University of Nottingham, UK

L. Empringham, University ofNottingham, UKM. Bland, University ofNottingham, UK

67p3A Novel Unified DTC-SVMfor Sensorless InductionMotor Drives Fed by a Matrix Converter 2360

Kyo-Beum Lee, Aalborg University, DenmarkFrede Blaabjerg, Aalborg University, Denmark

67p4

Speed-Sensorless DTC-SVM for Matrix Converter Drives with Simple Non-Linearity Compensation 2367

Kyo-Beum Lee, Aalborg University, DenmarkFrede Blaabjerg, Aalborg University, Denmark

Tae-Woong Yoon, KoreaUniversity, Korea

67p5

A New Class ofHybrid AC/AC Direct Power Converters 2374

Christian Klumpner, University ofNottingham, UK

Thiwanka Wijekoon, University ofNottingham, UKPatrick Wheeler, University ofNottingham, UK

67p6Common-Mode Voltage Characteristics of Matrix Converter-Driven AC Machines 2382

Jun-Koo Kang, Yaskawa Electric America Inc., USA

Tsuneo Kume, Yaskawa Electric America Inc., USA

Hidenori Hara, Yaskawa Electric Corporation, JapanEiji Yamamoto, YaskawaElectric Corporation, Japan

67p7AC-AC Single-Phase to Single-Phase Two-Leg Converters 2388

C. B. Jacobina, Universidade Federal de Campina Grande, Brazil

I. S. de Freitas, Universidade Federal de CampinaGrande, Brazil

E. R. C. da Silva, Universidade Federal de Campina Grande, Brazil

A. M. N. Lima, Universidade Federal de Campina Grande, Brazil

T. M. de Oliveira, Universidade Federal de Campina Grande, Brazil

Industrial Power Converter Committee

Session 68—Utility Interface and Power Quality III

Session Chair: Po-Tai Cheng, National TsingHuaUniversity, Taiwan

Session Organizer: Giovanna Oriti, Power Engineering Consultant, USA

68pl

Development of an SVPWM-based Predictive Current Controller for Three-Phase Grid-Connected VSI 2395

Qingrong Zeng, University ofNew Brunswick, Canada

LiuchenChang, University ofNew Brunswick, Canada

68p2

Auxiliary-Supply-Assisted Phase-Controlled 12-Pulse Rectifiers with Reduced Input Current Harmonics 2401

Shoji Fukuda, Hokkaido University, JapanIssei Hiei, Hokkaido University, Japan

68p3

A Novel Compensating Networkfor Inverter Driven Single-Phase High-Power Loads 2408

Peter KOllensperger, RWTH Aachen University, GermanyManfred Sievers, RWTH Aachen University, Germany

Dirk Linzen, RWTH Aachen University, GermanyRik W. De Doncker, RWTHAachen University, Germany

lv

68p4

Development and Implementation of a Power Quality Controller for a Mobilephone Telecom Station

Supplied by a Rural Utility End 2415

Xiaoyu Wang, Xi'an Jiaotong University, China

Jinjun Liu, Xi'an Jiaotong University, China

Guang Li, Xi'an Jiaotong University, China

Guochun Xiao, Xi'an Jiaotong University, China

Feng Xu, Xi'an Jiaotong University, China

Zhaoan Wang, Xi'an Jiaotong University, China

68pS

Per-Unit Design of a Transformerless, H-Bridge Dynamic Voltage Restorer with Closed-Loop Load Voltage

and Current-Mode Control 2420

Chi-Seng Lam, University ofMacau, PR China

Man-Chung Wong, University of Macau, PR China

Ying-Duo Han, TsinghuaUniversity, PR China

68p6

Modeling and Control ofDSTATCOM for Three-Phase, Four-Wire Distribution Systems 2428

Bhim Singh, Indian Institute ofTechnology, India

A. Adya, Netaji Subhas Institute ofTechnology, India

A. P. Mittal, Netaji Subhas Institute of Technology, India

J. R. P Gupta, Netaji Subhas Institute ofTechnology, India

Industrial Automation & Control Committee

Session 69—Applied & Advanced Controls

Session Chair: T. Hamrita, University ofGeorgia, USA

Session Organizer: M. Elbuluk, University ofAkron, USA

69plNetworked Control System with Network Time-delay Compensation 2435

Zaiping Chen, Tianjin University ofTechnology, China

Liang Liu, Tianjin University ofTechnology, China

Xunlei Yin, Tianjin University of Technology, China

69p2

Robust Control Scheme for a Microgrid with PFC Capacitor Connected 2441

Yunwei Li, Nanyang Technological University, SingaporeD. Mahinda Vilathgamuwa, Nanyang Technological University, SingaporePoh Chiang Loh, Nanyang Technological University, Singapore

69p3

Control of Direct Driven Feed Axes with Flexible Structural Components 2449

Oliver Zim, University ofApplied Sciences Giessen, GermanyAnnett Monat, University ofApplied Sciences Giessen, Germany

Tobias SchOller, Ruckle GmbH Werkzeugfabrik, Romerstein, Germany

69p4

System and Method for Determining Harmonic Contributions from Non-Linear Loads 2456

Joy Mazumdar, Georgia Institute ofTechnology, USAR. G. Harley, Georgia Institute of Technology, USA

Frank Lambert, NEETRAC, USA

69p5

Study ontheHILS Testing System for the Electric Traction System ofthe DC Locomotives 2464

Hao Wu, Shanghai Jiaotong University, China

Xiu-Bin Zhang, Shanghai Jiaotong University, China

lvi

Industrial Drives Committee

Session 70—Applications ofDrive Systems IISession Chair: Ajith Wijenayake, Danfoss, USA

Session Organizer: Mahesh Swamy , Yaskawa Electric America, Inc., USA

70plDouble Side Control of Wound Rotor Induction Machine for Wind Energy Application EmployingHalf Controlled Converters 2468

Debiprasad Panda, Rockwell Automation Advanced Technology Lab, USAThomas A. Lipo, University of Wisconsin-Madison, USA

70p2

Application ofMatrix Converter in Auxiliary Drive System for Diesel Locomotives 2476

Yang Mei, Tsinghua University, China

Kai Sun, Tsinghua University, China

Daning Zhou, Tsinghua University, China

Lipei Huang, Tsinghua University, China

Kouki Matsuse, Meiji University, Japan

70p3An Improved Stator Flux Estimation for a Variable Structure Direct Torque Controlled TPM SynchronousMotor Drive Usinga Sliding Observer 2484

Z. Xu, The University ofNew South Wales, Australia

M. F. Rahman, The University ofNew South Wales, Australia

70p4

Auto Disturbance Rejection Speed Control ofLinear Switched Reluctance Motor 2491

J. F. Pan, Hong Kong Polytechnic University, Hong KongKwok San Chin, Hong Kong Polytechnic University, Hong KongN. C. Cheung, Hong Kong Polytechnic University, Hong KongJinming Yang, South China University ofTechnology, China

70p5A High Performance and Cost Effective Drive based Power Conditioner for Critical Applications 2498

Kevin Lee, Eaton Innovation Center, USA

Ian T. Wallace, Eaton Innovation Center, USA

Jyrki K. Ahlgren, Eaton Electrical, USA

Edward F. Buck, Eaton Innovation Center, USA

70p6

Single-Phase Input Reduced Switch Count AC-AC Drive Systems 2505

C. B. Jacobina, Universidade Federal de Campina Grande, Brazil

B.C. Vilathgamuwa, Universidade Federal de Campina Grande, Brazil

M. B. R. Correa, Universidade Federal de Campina Grande, Brazil

E. R. C. da Silva, Universidade Federal de Campina Grande, Brazil

70P7An Improved Microcontroller-based Sensorless Brushless DC (BLDC) Motor Drive for Automotive Applications 2512

Jianwen Shao, STMicroelectronics, USA

Industrial Drives Committee

Session 71—Permanent Magnet Motor Drives

Session Chair: Abbas Fardoun, TRW Automotive, USA

Session Organizer: Fabio Giulii Capponi, Universita ofRoma "La Sapienza", Italy

71pl

UsingLow Resolution Position Sensors in Bumpless Position/Speed EstimationMethods for Low Cost PMSMDrives.2518

HyunbaeKim, Samsung Electronics, Korea

Sungmo Yi, Samsung Electronics, Korea

NamsuKim, Samsung Electronics, Korea

Robert D. Lorenz, University ofWisconsin-Madison, USA

71P2

Accurate Torque Control of Saturated Interior Permanent Magnet Synchronous Motors inthe Field-Weakening Region 2526

Michael M. Bech, Aalborg University, Denmark

Torben S. Frederiksen, Sauer-Danfoss, DenmarkPer Sandholdt, Sauer-Danfoss, Denmark

lvii

71p3

Novel Current Control Strategy for Maximum Tracking Operation under Saturated Voltage Condition 2533

Hyunjae Yoo, Seoul National University, Korea

Seung-Ki Sul, Seoul National University, Korea

71p4

Analysis ofLimit of the Constant Power Speed Range ofthe Permanent Magnet Synchronous Machine Driven

by Dual Mode Inverter Control 2540

Joao OnofrePereira Pinto, Federal University ofMato Grosso do Sul, Brazil

Nicolau Pereira Filho, Federal University ofMato Grosso do Sul, Brazil

Jack S. Lawler, The University ofTennessee, USA

71p5Cross Saturation Effects in IPM Motors and Related Impact on Zero-Speed Sensorless Control 2546

Paolo Guglielmi, Politecnico di Torino, ItalyMichele Pastorelli, Politecnico di Torino, ItalyAlfredo Vagati, Politecnico di Torino, Italy

71p6Influence of Rotor Geometry of an Interior PM Motor on Sensorless Control Feasibility 2553

Nicola Bianchi, University ofPadova, ItalySilverio Bolognani, University ofPadova, Italy

71p7

Synergetic Control for Axial-Flux PM Motor Drives 2561

A. Lidozzi, University Roma Tre, ItalyL. Solero, University Roma Tre, ItalyP. Taddia, University Roma Tre, Italy

Electrostatic Processes Committee

Session 72—EHD and Electrostatic SeparationSession Chair: KazAdamiak, University ofWestern Ontario, Canada

Session Organizer: Norbert Grass, Georg-Simon-Ohm Fachhochschule NUmberg, Germany

72plNew Applications for "Standard" Electrostatic Separators 2569

RainerKflhnlechner, Hamos GmbH, GermanyLucianDascalescu, University ofPoitiers, France

72p2

Electrostatic Precipitator Diagnostics Based on Flashover Characteristics 2573

Norbert Grass, University ofApplied Science, Germany

72p3

Capturing Fine Particles Using Magnetically Enhanced Corona Pre-charger in Front of anElectrostatic

Enhancement Filter 2578

DexuanXu, Northeast Normal University, China

Zhendong Pan, NortheastNormal University, China

Yinghao Sun, NortheastNormal University, ChinaZhiming Guo, Northeast Normal University, China

Haijun Wang, Northeast Normal University, ChinaJae-Ou Cliae, Inha University, Korea

V. Ravi, Inha University, Korea

72p4Effects ofEHD and External Air Flows on Electric Corona Discharge in Pin-Plate Configuration 2584

Lin Zhao, The University ofWestern Ontario, Canada

Kazimierz Adamiak, The University ofWestern Ontario, Canada

72p5

Capability Evaluation and Statistic Control ofElectrostatic Separation Processes 2590

K. Medles, University Institute ofTechnology, France; University Djillali Liabes, AlgeriaA. Tilmatine, University Djillali Liabes, AlgeriaA. Bendaoud, University Djillali Liabes, AlgeriaK. Senouci, University Djillali Liabes, AlgeriaS. Das, University Institute ofTechnology, FranceA. Mihalcioiu, University Institute ofTechnology, France

L. Dascalescu, University Institute of Technology, France

lviii

72p6

Electrohydrodynamic Gas Flow Regime Map in a Wire-Plate Electrostatic Precipitator 2597J. S. Chang, McMaster University, Canada

J. Dekowski, PolishAcademy ofSciences, PolandJ. Podlhiski, Polish Academy of Sciences, PolandD. Brocilo, McMaster University, CanadaK. Urashima, McMaster University, CanadaJ. Mizeraczyk, Polish Academy of Sciences, Poland

72p7

Numerical Modelling of Conductive Particle Trajectories in Roll-type Electrostatic Separators 2601

M. Younes, Universite Djillali Liabes, AlgeriaA. Tilrnatine, Universite Djillali Liabes, AlgeriaK. Medles, Universite Djillali Liabes, AlgeriaM. Rahli, Universite des Sciences et Teclinologie, AlgeriaL. Dascalescu, Institut Universitaire de Technologie, France

PowerElectronics Devices & Components Committee

Session 73—Semiconductor Models: Thermal Models

Session Chair: Prof. Dawson, University ofToronto, CanadaSession Organizer: Enrico Santi, University of South Carolina, USA

73pl

A Coupled Thermal and Electrical Time-Domain Soft Starter SystemModel 2607

Mark A. Juds, Eaton Corporation, USA

Kevin Lee, Eaton Corporation, USAMark G. Solveson, Eaton Corporation, USAWilliam E. Berkopec, Eaton Corporation, USAJames A. Becker, Eaton Corporation, USA

73p2Design for Better Thermal Management in High-Power High-Frequency Transformers 2615

M. Pavlovsky, DelftUniversity ofTechnology, The Netherlands

S. W. H. deHaan, Delft University ofTechnology, The Netherlands

J. A. Ferreira, Delft University ofTechnology, TheNetherlands

73p3

Temperature Rise and Free Convection Heat Transfer Coefficient for 2-D Pot-Core Inductors and Transformers 2622

F. Farahmand, University ofToronto, Canada

F. P. Dawson, University ofToronto, CanadaJ. D. Lavers, University ofToronto, Canada

73p4

Power Losses and Thermal Modeling ofa 4H-SiCVJFET Inverter 2630

Hui Zhang, The University ofTennessee, USALeon M. Tolbert, The University ofTennessee, USA; Oak Ridge National Laboratory, USABurak Ozpineci, OakRidgeNational Laboratory, USA

Madhu S. Chinthavali, OakRidgeNationalLaboratory, USA

73p5Physical Modeling ofForward Conduction in IGBTs and Diodes 2635

L. Lu, University of South Carolina, USA

S. G. Pytel, University of South Carolina, USA

E. Santi, University ofSouth Carolina, USA

A, T. Bryant, University ofCambridge, UKJ. L. Hudgins, University ofNebraska, USA

P. R. Palmer, University ofBritish Columbia, Canada

73p6

Modeling of IGBT Resistive and Inductive Turn-On Behavior 2643

L. Lu, University of South Carolina, USA

S. G. Pytel, University of South Carolina, USA

E. Santi, University of South Carolina, USA

A. T. Bryant, University of Cambridge, UK

J. L. Hudgins, University ofNebraska, USA

P. R. Palmer, University of British Columbia, Canada

lix

Energy Systems Committee

Session 74—Energy System Committee I

Session Chair: Wei-Jen Lee, University of Texas at Arlington, USA

Session Organizer: Wei-Jen Lee, University ofTexas at Arlington, USA

74pl

Web-based Real Time Power System Dynamic Performance Monitoring System 2651

Shun-Hsien Haung, The University ofTexas at Arlington, USAWei-Jen Lee, The University ofTexas at Arlington, USA

Shili-Ping Wang, Formosa Plastics Corporation, USA

Jen-Hung Chen, Formosa Plastics Corporation, USA

Chung-Huei Hsu, Formosa Plastics Corporation, USA

74p2

Simulink Model of Controlled Power Factor Flux Switching Generator System for Embedded Power Generation 2657

K. N. Ochije, University of Leicester, UK; Advanced Integrated Engineering Solutions Ltd., UK

C. Pollock, University ofLeicester, UK; Technelec Ltd., UK

74p3

Transmission Congestion Management during Transition Period ofElectricity Deregulation in Thailand 2665

Chai Chompoo-inwai, University of Texas at Arlington, USA

Chitra Yingvivatanapong, University of Texas at Arlington, USA

Pradit Fuangfoo, University ofTexas at Arlington, USA

Wei-Jen Lee, University of Texas at Arlington, USA

74p4

Short-Term, Long-Term Energy Storage Methods for Standby Electric Power Systems 2672

Alexander Kusko, Exponent, USAJohn DeDad,EC&M, USA

74p5

Risk-based Optimal TTC Evaluation with Transient Stability Constraints 2679

K. Cui, Tianjin University, China

D. Z. Fang, Tianjin University, China

T. S. Chung, The Hong Kong Polytechnic University, ChinaY. Cheng, The Hong Kong Polytechnic University, China

74p6

Competitive Maintenance Scheduling and Settlement Based on Bidding in Electricity Market 2684

Zhihua Gao, South China University of Technology, China

Zhen Ren, South China University ofTechnology, China

74p7

Optimal Operation of Distribution System with Regard to Distributed Generation:

A Comparison ofEvolutionary Methods ,2690

T. Niknam, Azad University, Iran

A.M. Ranjbar, Sharif University ofTechnology, Iran

A.R. Shirani, Niroo Research Institute, Iran

B. Mozafari, Azad University, IranA. Ostadi, SharifUniversity ofTechnology, Iran

Electric Machines Committee

Session 75—Switched Relucatance Machines

Session Chair: Avoki Omekanda, Delphi Research Labs, USASession Organizer: Avoki Omekanda, Delphi Research Labs, USA

75pl

Test Results of a SRM Made of Layered Block of Heat-Treated Amorphous Alloys 2698

Akira Chiba, Tokyo University ofScience, JapanShinya Ito, Tokyo University ofScience, JapanKanokvate Tungpimohut, Tokyo University of Science, JapanMAzizur Rahman, Tokyo University of Science, JapanTadashi Fukao, Musashi Institute of Technology, Japan

Mitsunobu Yoshida, Mitsui Chemicals, Japan

lx

75p2

New Methodology in Sizing and Predesign of Switched Reluctance Machines Using Normalized

Flux-Linkage Diagram 2704

Nisai H. Fuengwarodsakul, RWTH-Aachen University, GermanyJens O. Fiedler, RWTH-Aachen University, GermanyStefan E. Bauer, RWTH-AachenUniversity, GermanyRikW. De Doncker, RWTH-Aachen University, Germany

75P3

Design, Modeling and Analysis of a Brushless Doubly-Fed Doubly-Salient Machine for Electric Vehicles 2712

Ying Fan, The University ofHong Kong, China

K. T. Chau, The University ofHong Kong, China

75p4

Modeling and Control of a Self-Bearing Switched Reluctance Motor 2720

Wei-Tin Liu, Tamkang University, Taiwan

Sheng-Ming Yang, Tamkang University, Taiwan

75pS

Torque Ripple Reduction in Switched Reluctance MotorDrives Using B-Spline Neural Networks 2726

ZhengyuLin, Heriot-Watt University, UKDonald S. Reay, Heriot-Watt University, UK

Barry W. Williams, Heriot-Watt University, UK

Xiangning He, Zhejiang University, China

75p6

Classification and Remediation of Electrical Faults inthe Switched Reluctance Drive 2734

Suresh Gopalakrishnan, Delphi ResearchLabs, USA- Avoki M. Omekanda, Delphi Research Labs, USABruno Lequesne, Delphi Research Labs, USA

75p7

Study ofPower Factor inSRM Drives under Current Hysteresis Chopping Control 2741

X. D. Xue, The Hong Kong Polytechnic University, PR China

K. W. E. Cheng, TheHong Kong Polytechnic University, PR China

S. L. Ho, The Hong Kong Polytechnic University, PR China

PowerElectronics Devices & Components Committee

Session 76—Power Devices: Power Electronics Devices & Components Committee Products and Services

Session Chair: Leo Lorenz, Infineon, GermanySession Organizer: R. A. Lukaszewski, Rockwell Automation, USA

Production & Application of Light Committee

Session 77—Ballasts for Fluorescent LampsSession Chair: W. Yan, Hong Kong University, Hong KongSession Organizer: Georges Zissis, University Toulouse III, France

77pl

Full Digital Dimming Regulation of Fluorescent Lamps with -54 dB/HzLightRipple 2747

Dirk Killat, Kirchheim-Teck, Germany

Robert Baraniecki, Kirchheim-Teck, Germany

77p2

Analysis ofthe Voltage Feedback Self-Oscillating Electronic Ballasts 2753

Chenyang Liu, Zhejiang University, PR China

Lin Ping, Zhejiang University, PR China

Wang Chuanbing, Zhejiang University, PR China

Changsheng Hu, Zhejiang University, PR China

Zhongchao Zhang, Zhejiang University, PR China

77p3

Electronic Ballast forFluorescent Lamps without Light Fluctuation 2758

Yong N. Chang, National Formosa University, ROC

Jian C. Lai, National Sun Yat-Sen University, ROC

Chin S. Moo, National Sun Yat-SenUniversity, ROC

Alex B. Liao, Winstar Technology, ROC

Is

77p4

Inductor Phase Feedback for Phase-locked Loop Control ofElectronic Ballasts 2763

Ray-Lee Lin, National Cheng Kung University, ROC

Ming-Chieh Yeh, National Cheng Kung University, ROC

77pS

SEPIC Converter to Perform Power Factor Correction in a Ballast for Fluorescent Lamps 2770

OlafBusse, OSRAM GmbH, GermanySiegfried Mayer, OSRAM GmbH, GennanyBernhard SchemmeL OSRAM GmbH, GermanyArwed Storm, OSRAM GmbH, Germany

77p6

Energy Efficiency Comparison ofDimmable Electromagnetic and Electronic Ballast Systems 2775

S. Y. R. Hui, City University ofHong Kong, China

W. Yan, City University ofHong Kong, China

H. Chung, City University ofHong Kong, China

P. W. Tarn, City University ofHong Kong, China

G. Ho, City University ofHong Kong, China

IndustrialPower Converter Committee

Session 78—EML Modeling and Analysis ofPower Converters

Session Chair: Rik De Doncker, RWTH-Aachen, GermanySession Organizer: Seung-Ki Sul, Seoul National University ofTech., Korea

78P1Transient Modeling and Analysis of Pulse-Width Modulated Z-Source Inverter 2782

P. C, Loh, Nanyang Technological University, SingaporeD. M. Vilathgamuwa, Nanyang Technological University, SingaporeC. J. Gajanayake, Nanyang Technological University, SingaporeY. R, Lini, Nanyang Technological University, SingaporeC. W. Teo, Nanyang Technological University, Singapore

78p2

EMI Reduction of Switching Power Supply by Frequency Jitter 2790

Li Cai, Delta Power Electronics Center, China

Zhihui Yang, Delta Power Electronics Center, China

Wei Chen, Delta Power Electronics Center, China

78p3

Identification ofEMI Noise Sources through the Use ofFourier and Wavelet Transforms 2794

Luisa Coppola, University ofPadova, ItalySimone Buso, University ofPadova, ItalyQianLiu, Virginia Polytechnic Institute and State University, USADushan Boroyevich, Virginia Polytechnic Institute and State University, USA

Amy Bell, Virginia Polytechnic Institute and State University, USA

78p4

Modeling, Analysis and Control Design of Single-Stage Current Source PFC Converter 2802

Alexander Uan-Zo-li, Virginia Polytechnic Institute and State University, USAFred C. Lee, Virginia Polytechnic Institute and State University, USARolando Burgos, Virginia Polytechnic Institute and State University, USA

78p5

Common-Mode Voltage Reduction in a Reduced-Switch Induction Motor Drive System 2809

M. B. R. Correa, Universidade Federal de Campina Grande, Brazil

R. S. Miranda, Universidade Federal de Campina Grande, Brazil

C. R. da Silva, Universidade Federal de Campina Grande, Brazil

C. B. Jacobina, Universidade Federal de Campina Grande, Brazil

E. R. C. da Silva, Universidade Federal de Campina Grande, BrazilA. M. N. Lima, Universidade Federal de Campina Grande, Brazil

78p6

Frequency Model for Differential-Mode Conducted EMI Prediction in Three-PhasePWM Inverter 2816

Wei Chen, Zhejiang University, China

Pingping Chen, Zhejiang University, ChinaLimin Feng, Zhejiang University, China

Henlin Chen, Zhejiang University, China

Zhaoming Qian, Zhejiang University, China

lxii

Electric Machines Committee

Session 79—Special Machines II

Session Chair: William Fei, Emerson Motor Company, USASession Organizer: Pete Wung, Emerson Motor Company, USA

79pl

Effect of Winding Harmonics on the Asynchronous Torque of a Single-Phase Line-Start Permanent-Magnet Motor. 2820

Mircea Popescu, University ofGlasgow, UKT. J. E. Miller, University ofGlasgow, UKMalcolm McGilp, University ofGlasgow, UKF. J. H. Kalluf, EMBRACO S.A., Brazil

Claudia da Silva, EMBRACO S.A., Brazil

Luiz von Dokonal, EMBRACO S.A., Brazil

79p2

Dual-Mechanical-Port Electric Machines—A New Concept in Design and Analysis ofElectric Machines 2828

Longya Xu, The Ohio State University, USA

79p3

Advanced Voltage Control of Induction Generator Using Rotor Field-Oriented Control 2835

Tarek Ahmed, Yamaguchi University, JapanKatsumiNishida, Ube National College ofTechnology, Japan

Mutsuo Nakaoka, Kyungnam University, Korea

79p4

Fixation ofBuried and Surface Mounted Magnets in High-Speed Permanent Magnet Synchronous Motors 2843

Andreas Binder, Darmstadt University of Technology, Germany

Tobias Schneider, Darmstadt University of Technology, GermanyMarkus Klohr, Darmstadt University ofTechnology, Germany

IndustrialDrives Committee

Session 80—Applications ofDrive Systems I

Session Chair: Mark Sumner, The University ofNottingham, UK

Session Organizer: Mahesh Swamy, Yaskawa Electric America, Inc., USA

80pl

Investigation of Switched-Mode Rectifierfor Control of Small-Scale Wind Turbines 2849

D. M. Whaley,University ofAdelaide, Australia

W. L. Soong, University ofAdelaide, Australia

N. Ertugrul, University ofAdelaide, Australia

80p2

PM Motor Drives for Steer-by-Wire Applications 2857

Angela Benedetti, University ofBologna, ItalyNicola Bianchi, University ofPadova, ItalySilverio Bolognani, University ofPadova, ItalyMichele Dai Pre, University ofPadova, ItalyPierGabriele Molari, University ofBologna, ItalyPiero Morelli, University ofBologna, Italy

Matteo Tomasini, University ofPadova, ItalyLuca Tubiana, University ofUdine, ItalyMauro Zigliotto, University ofUdine, Italy

80p3

Performance Evaluation ofElectric Bicycles 2865

A. Muetze, University ofWisconsin-Madison, USA

Y. C. Tan, University ofWisconsin-Madison, USA

80p4

Reduced Model Identification for Traction Drive-Trains 2873

Michael Fleischer, University ofErlangen-Nuremberg, Germany; Railway TechnicalResearch Institute, Japan

lxiii

80p5

A New Topology and Control Scheme for 4WD HEV using a DFIM with a Reduced Size Converter-Inverter 2880

Hong-Seok Song, Hyundai Motor Company, Korea

KwangheeNam, Postech University, Korea

Hae-Ryong Choi, Hyundai Motor Company, KoreaHo-Gi Kim, Hyundai Motor Company, Korea

80p6

Surge Control of the Electrically Driven Centrifugal Compressor 2887

K. O. Boinov, Eindhoven University of Technology, The Netherlands

E. A. Lomonova, Eindhoven University of Technology, The Netherlands

A. J. A. Vandenput, Eindhoven University ofTechnology, The Netherlands

A. Tyagunov, Eindhoven University ofTechnology, The Netherlands

Electrostatic Processes Committee

Session 81—Plasma Processes in Energy and Environmental EngineeringSession Chair: Keping Yan, Eindhoven University ofTechnology, The Netherlands

Session Organizer: Hee Kyu Lee, Bucheon College, Korea

81pl

Aqueous Phenol Decomposition by Pulsed Discharge on Water Surface 2895

Masayuki Sato, Gunma University, JapanTsuyoshi Tokutake, Gunma University, Japan

Takayuki Ohshima, Gunma University, JapanAnto Tri Sugiarto, Indonesian Institute of Sciences, Indonesia

81p2

Low Pressure Pulse-Modulated and Radio-Frequency Plasma for CF4 Decomposition 2900

Tomoyuki Kuroki, Osaka Prefecture University, JapanShingo Tanaka, Osaka Prefecture University, JapanMasaaki Okubo, Osaka Prefecture University, JapanToshiaki Yanamoto, Osaka Prefecture University, Japan

81p3Pilot-Scale NOx and SOx Removal from Boiler Emission Using Indirect Plasma and Chemical Hybrid Process 2906

Toshiaki Yamamoto, Osaka Prefecture University, JapanHidekatsu Fujishima, Osaka Prefecture University, JapanMasaaki Okubo, Osaka Prefecture University, JapanTomoyuki Kuroki, Osaka Prefecture University, Japan

81p4

Atomic Oxygen Radical Observation in an Atmospheric Pressure Pulsed Discharge by TALIF 2914

Kei Takezawa, The University ofTokyo, JapanRyo Ono, The University ofTokyo, Japan

Tetsuji Oda, The University of Tokyo, Japan

81p5

Nonthemal Plasma Chemical Processing of Mixed VOCs 2918

Masami Sugasawa, National Institute ofAdvanced Industrial Science and Technology, JapanGurusamy Annadurai, National Institute ofAdvanced Industrial Science and Technology, Japan

Shigeru Futamura, National Institute ofAdvanced Industrial Science and Technology, Japan

81p6

Total Diesel Emission Control System Using Ozone Injection and Plasma Desorption 2924

Masaaki Okubo, Osaka Prefecture University, JapanNaoki Arita, Osaka Prefecture University, JapanTomoyuki Kuroki, Osaka Prefecture University, JapanToshiaki Yamamoto, Osaka Prefecture University, Japan

lxiv

Energy Systems Committee

Session 82—Energy System Committee HSession Chair: Wei-Jen Lee, University of Texas at Arlington, USASession Organizer: Wei-Jen Lee, University of Texas at Arlington, USA

82pl

Optimal Hydrogen Production in a Stand-Alone Renewable Energy System 2932

Kodjo Agbossou, Universite du Quebec a Trois-Rivieres, CanadaMamadou L. Doumbia, Universite du Quebec a Trois-Rivieres, CanadaAdil Anouar, Universite du Quebec a Trois-Rivieres, Canada

82p2

Nonlinear Control ofPEM Fuel Cells by Exact Linearization 2937Woonki Na, University ofTexas at Arlington, USABei Gou, University ofTexas atArlington, USA

Bill Diong, Texas Christian University, USA

82p3

Design for the Different Penetrating Power Based on Wind Farm Models Connected to Power Grids 2944

P. Dong, The Hong Kong Polytechnic University, Hong KongK. W. E. Cheng, The Hong Kong Polytechnic University, Hong KongY. Lu, TheHong Kong Polytechnic University, Hong KongX. D. Xue, The Hong Kong Polytechnic University, Hong Kong

82p4

A Novel Stand-Alone Induction Generator System for AC and DC Power Applications 2950

Tarek Ahmed, Yamaguchi University, JapanKatsurniNishida, UbeNational College of Technology, JapanMutsuo Nakaoka, Kyungnam University, Korea

82p5

HighPower Factor Electronic BaUast with IntelligentEnergy Saving Control for Ultraviolet Lamps Drive 2958

Shun-Chung Wang,Lung Hwa University ofScience and Technology, Taiwan

Chi-Feng Su, Lung Hwa University ofScience and Technology, Taiwan

Chien-Hung Liu, Lung Hwa University of Science andTechnology, Taiwan

82p6

Energy Saving for Fluorescent Lighting in Commercial Buildings 2965

Sahniah Ahmad, Curtin University ofTechnology, Australia

Seong Ryong Lee, Kunsan National University, KoreaHooman Dehbonei, CurtinUniversity of Technology, Australia

Chem Nayar, Curtin University ofTechnology, Australia

Author Index 2973

lxv