RCS PLUS

� Easy to calibrate

� No de-rating of lift truck capacity

� Suitable for rough applications

� For trucks with capacities up to 65,000 Lbs

� Used with any forklift attachment

� Accurate hydraulic scale

FORKLIFT TRUCK SCALES

Hydraulic scale for forklift trucks

BENEFITS

Top qualityGood accuracy

TS L

FT R

AVA

S-LF

T-pr

intR

CS

PLU

S EN

USA

rev.

16.0

4.28

Cha

nges

rese

rved

OPTIONS*

* The use of options may change related specifications

� Bluetooth, WiFi or serial output � Thermal printer

� Integrated power converter 24V-72V for indicator power supply via truck battery

� High capacity hydraulic valve block, for capacities above 65,000 lb; graduation 100 lb

RCS PLUS

backo�ce@ravas.com, www.ravas.com

FUNCTIONS

� Error messages in display

� lb/kg toggle

� Totalling with sequence number

� Code entry (5-digit)

� Manual tare entry

� Gross/net weighing

� Manual zero correction

HOW RCS PLUS WORKS• Markings on the forklift mast indicate the reference height point, • The load is lifted until the markings line up, • Press the red ‘weigh’ button on the indicator, • During a controlled descent of the forks, the weight is measured • The weight is shown on the indicator.

SYSTEM PACKAGE

� Operator manual

� Installation- and calibration instructions

� Lifting height reference mark stickers

� Indicator 310 plus RAM indicator mounting support

� Hydraulic valve block with oil pressure sensor and flow adjustment regulator

STANDARD SPECIFICATIONS

� Power supply 12Vdc, from truck battery

� Protection class NEMA 4 / IP65

� Controls 4 function keys, on/off key

� Display LCD, digit height 0.7 inch, adjustable backlight

� System tolerance 0.2% of the scale capacity

20 lb at 20,000 lb capacity

10 lb at 10,000 lb capacity

� Graduation 5 lb at 5,000 lb capacity

� Capacity 5,000, 10,000 or 20,000 lb

Please note: the 0.2% tolerance can only be guaranteed if the truck mast is in good condition and the weighing system is used correctly. Rollers and bearings in the mast should be properly lubricated. During weighing, the mast should be in vertical position, the load should be placed in the center of the forks.